name: shanghai institute of quality inspection and technical...

ISO/IEC 17025 认可证书

No. CNAS L0128

The scope of the accreditation in Chinese remains the definitive version.

第 1 页共 187 页

Name: Shanghai Institute of Quality Inspection and Technical Research

Address: No. 918, Wanrong Road, Shanghai, China

Registration No. CNAS L0128

Accreditation Criteria: ISO/IEC 17025:2017 and relevant requirements of CNAS

Effective Date: 2019-12-31 Expiry Date：2024-10-11

SCHEDULE 3 ACCREDITED TESTING SCOPE

Item/Parameter№ Test Object

№ Item/ ParameterStandard or Method Note Effective Date

Chemistry

Metals and alloys

1 Carbon and low-Alloy steel 1

C、Si、Mn、P、S、Cr、Ni、W、Mo、V、Al、Ti、Cu、Nb、Co、B、As、Sn

Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method) GB/T 4336-2016 9.2

2018-07-20

2 Stainless steel 1

C、Si、Mn、P、S、Cr、Ni、Mo、Al、Cu、W、Ti、Nb、V、Co、B、As、Sn、Pb

Stainless steel -Determination of multi-element contents-Spark discharge atomic emission spectrometric method(Routine method) GB/T 11170-2008 8.3

2018-07-20

3 Copper and copper alloys 1Pb、Fe、Bi、Sb、As、Sn、Ni、Zn、

Methods for analysis of copper and copper alloys-The atomic emission spectrometry YS/T 482-2005(2012) 8 2018-07-20


No. CNAS L0128


第 2 页共 187 页

№ Test ObjectItem/Parameter

Standard or Method Note Effective Date№ Item/ Parameter

P、S、Mn、Si、Cr、Al、Mg、Co、Cd

4Aluminum and aluminum alloys|

1

Si、Fe、Cu、Mn、Mg、Cr、Ni、Zn、Ti、V、Pb、Sn、Sb、Bi、Ca、Cd

Optical emission spectrometric analysis method of aluminum and aluminum alloys GB/T 7999-2015 7 2018-07-20

Machinery

Reinforcing Steel Bar

Partial Parameters Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018

Expect for fatigue performance, connection performance

2019-12-31

1 chemical composition

Carbon and low-alloy steel-Determination of multi-element contents-Spark discharge atomic emission spectrometric method(routine method) GB/T 4336-2016

2019-12-31

2 stretch Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31

3 bending Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31

4 reverse bending Test methods of steel for reinforcement of concrete GB/T 28900-2012 2019-12-31

1Hot roller rib bar for ferroconcrete

5 size Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018 8.3 2019-12-31


No. CNAS L0128


第 3 页共 187 页



6 surface Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018 7.10 2019-12-31

7 weight deviation Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars GB/T 1499.2-2018 8.4 2019-12-31

8 metallographic structureInspection methods of microstructure for metals GB/T 13298-2015 2019-12-31

9 grain size Determination of estimating the average grain size of metal GB/T 6394-2017 2019-12-31

All items Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 2019-12-31

1 chemical composition

Carbon and low-alloy steel-Determination of multi-element contents-Spark discharge atomic emission spectrometric method(routine method) GB/T 4336-2016

2019-12-31



4 size Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 8.3 2019-12-31

5 surface Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 7.4 2019-12-31

2Hot roller round bar for ferroconcrete

6 weight deviation Steel for the reinforcement of concrete Part 1:Hot rolled plain bars GB/T 1499.1-2017 8.4 2019-12-31

3Cold rolled ribbed steel wires and bars

Partial Parameters Cold rolled ribbed steel wires and bars GB/T 13788-2008

Except for alternating bending & stress relaxation tests

2019-12-31


No. CNAS L0128


第 4 页共 187 页





3 size Cold rolled ribbed steel wires and bars GB/T 13788-2017 7.4 2019-12-31

4 surface Cold rolled ribbed steel wires and bars GB/T 13788-2017 6.4 2019-12-31

5 weight deviation Cold rolled ribbed steel wires and bars GB/T 13788-2017 7.5 2019-12-31

Machine tool

1Metal-cutting machine tools(Safety)

1 Safety Metal-cutting machine tools-General safe guarding specification GB 15760-2004 2018-07-20

1 ElectricalGeneral specifications for metal-cutting machine tools GB/T9061-2006 3.54.6.8

2018-07-20

2 numerical control system

General specifications for metal-cutting machine tools GB/T9061-2006 3.64.6.9

2018-07-20

3 sound measurement General specifications for metal-cutting machine tools GB/T9061-2006 3.94.6.6

2018-07-20

4 operating forceGeneral specifications for metal-cutting machine tools GB/T9061-2006 3.94.6.4

2018-07-20

5 Hardness General specifications for metal-cutting machine tools GB/T9061-2006 3.10 2018-07-20

2

Metal-cutting machine tools(Technical parameter)

6 casting quality General specifications for metal-cutting machine tools GB/T9061-2006 3.13.3 2018-07-20


No. CNAS L0128


第 5 页共 187 页



7 Temperature rise General specifications for metal-cutting machine tools GB/T9061-2006 4.6.2.1 2018-07-20

8 empty distance General specifications for metal-cutting machine tools GB/T9061-2006 4.6.4 2018-07-20

9 free-load running powerGeneral specifications for metal-cutting machine tools GB/T9061-2006 4.6.7 2018-07-20

10 Machine tool load testGeneral specifications for metal-cutting machine tools GB/T9061-2006 4.7 2018-07-20

11 vibration test General specifications for metal-cutting machine tools GB/T9061-2006 4.8.4 2018-07-20

12 Stiffness test General specifications for metal-cutting machine tools GB/T9061-2006 4.8.5 2018-07-20

1

Electrical equipment of industrial machines - Continuity of the protective bonding circuit test

Electrical Safety of machinery—Electrical equipment of machines—Part 1：General requirements GB 5226.1-2008 20.2

Except for :EMC 2018-07-20

2 resistance test Electrical Safety of machinery—Electrical equipment of machines—Part 1：General requirements GB 5226.1-2008 20.3Except for :EMC 2018-07-20

3

Metal-cutting machine tools(Electrical test)

3 High-voltage test Electrical Safety of machinery—Electrical equipment of machines—Part 1：General requirements GB 5226.1-2008 20.4 2018-07-20

4


1

Electrical equipment of industrial machines - Continuity of the protective bonding circuit test

Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications GB/T 24342-2009 4 2018-07-20

5 Metal-cutting machine 1 resistance testElectrical equipment of industrial machines—Insulation resistance test specifications Electrical equipment of industrial 2018-07-20


No. CNAS L0128


第 6 页共 187 页



tools(Electrical test)

machines—Insulation resistance test specifications GB/T 24343-2009 4

6


1 High-voltage test Electrical equipment of industrial machines - High-voltage test specifications GB/T 24344-2009 4 2018-07-20

1 flatnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.3

2018-07-20

2 parallelismTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.4

2018-07-20

3 equidistantTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.4.3

2018-07-20

4 axialityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.4.4.2

2018-07-20

5 contact ratioTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.5

2018-07-20

6 squarenessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6

2018-07-20

7 runoutTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6.1

2018-07-20

7

Metal-cutting machine tools(Geometric accuracy)

8 cycle run-outTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6.1

2018-07-20


No. CNAS L0128


第 7 页共 187 页



9 axial floatTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 5.6.2.

2018-07-20

10 roundnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 6.6

2018-07-20

11 cylindricityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.1-1998 6.7

2018-07-20

1 flatnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.3

2018-07-20

2 parallelismTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.4

2018-07-20

3 equidistantTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.4.3

2018-07-20

4 axialityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.4.4.2

2018-07-20

5 contact ratioTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.5

2018-07-20

6 squarenessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6

2018-07-20

8

Metal-cutting machine tools(Geometric accuracy)

7 runoutTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6.1

2018-07-20


No. CNAS L0128


第 8 页共 187 页



8 cycle run-outTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6.1

2018-07-20

9 axial floatTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 5.6.2.

2018-07-20

10 roundnessTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 6.6

2018-07-20

11 cylindricityTest code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions ISO 230-1:2012 6.7

2018-07-20

9

Metal-cutting machine tools(Accuracy of Positioning)

1 positioning accuracyTest code for machine tools-Part 2:Determination of accuracy and repeatability of positioning numerically controlled axes GB/T 17421.2-2016

2018-07-20

10


1 positioning accuracyTest code for machine tools-Part 2:Determination of accuracy and repeatability of positioning numerically controlled axes ISO 230-2:2014

2018-07-20

11


1 positioning accuracy Statistical examination of exactly working and positioning of machine-tools Fundamentels VDI/DGQ 3441 1977-03 2018-07-20

12


1 positioning accuracy Machine tools - Running tests and rigidity tests - General requirements JIS B 6201:1993 2018-07-20

13 Metal-cutting machine 1 Circular testsTest code for machine tools-Part4: Circular tests for numerically controlled machine tools GB/T 17421.4-2016 2018-07-20


No. CNAS L0128


第 9 页共 187 页



tools(Circular tests)

14

Metal-cutting machine tools(Circular tests)

1 Circular tests Test code for machine tools-Part4: Circular tests for numerically controlled machine tools ISO 230-4:2005 2018-07-20

15

Metal-cutting machine tools(Vibration)

1 vibration Metal-cutting machine tools--Measurement method for vibration GB/T 16768-1997 2018-07-20

16General purpose parallel lathes

All parameters Horizontal lathes-Part2:Specifications JB/T 2322.2-2006 2018-07-20

17General purpose parallel lathes

All parameters Acceptance conditions for general purpose parallel lathes-Testing of the accuracy GB/T 4020-1997 2018-07-20

18

Numerically controlled Instrument lathes

All parameters Numerically controlled instrument lathes-Part2：Specifications JB/T 8326.2-2017 2018-12-28

19

Numerically controlled Instrument lathes

All parameters Numerically controlled instrument lathes-Oart1：Accuracy JB/T 8326.1-2017 2018-12-28

20

Numerically controlled horizontal turning machines

All parameters Numerically controlled horizontal turning machines and turning centres-Part 1:Specifications JB/T 4368.1-2013(2017) 2018-07-20


No. CNAS L0128


第 10 页共 187 页



21


All parametersTest conditions for numerically controlled turning machines and turning centres—Part 1:Geometric test for machines with a horizontal workholding spindle GB/T 16462.1-2007

2018-07-20

22


All parameters Safety of machine tools - Small numerically controlled turning machines and turning centres GB 22997-2008 2018-07-20

23


All parameters Safety of machine tools - Large numerically controlled turning machines and turning centres GB 22998-2008 2018-07-20

24High precision turning machines

All parameters High precision turning machines-Specifications JB/T 7420-1994 2018-07-20

25High precision turning machines

All parameters High precision horizontal lathes-Part1：Testing of the accuracy JB/T 8768.1-2011 2018-07-20

26Heavy duty horizontal lathes

All parameters Heavy duty horizontal lathes- Part1:Specifications JB/T 3663.1-2006 2018-07-20


All parameters CNC heavy duty horizontal lathes-Part2: Specifications JB/T 8325.2-2006 2018-07-20


All parameters Test conditions for heavy duty horizontal lathe - Testing of the accuracy GB/T 23569-2009 2018-07-20


No. CNAS L0128


第 11 页共 187 页



29 Instrument lathes All parameters Instrument lathes-Part6:Specifications JB/T 4136.6-2017 2018-12-28

30 Instrument lathes All parametersInstrument lathes-Part3:Testing of the accuracy JB/T 4136.3-2017 2018-12-28

31 Faceplate lathes All parameters Faceplate lathes-Part1: Specifications JB/T 2523.1-2006 2018-07-20

32 Faceplate lathes All parametersFaceplate lathes-Part3：Testing of the accuracy JB/T 2523.3-2011 2018-07-20

33CNC vertical turning machines

All parameters CNC vertical turning machines-Part 2:Specification JB/T 9934.2-2006 2018-07-20

34CNC vertical turning machines

All parametersTest conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: Single and double column vertical turning and boring lathes GB/T 23582.1-2009

2018-07-20

35CNC automatic lathes with sliding head

All parameters CNC sliding headstock automatic lathe -Part 2：Specifications JB/T 10165.2-2015 2018-07-20

36CNC automatic lathes with sliding head

All parameters CNC sliding headstock automatic lathe - Part 1：Testing the accuracy JB/T 10165.1-2015 2018-07-20

37 Cylindrical grinding All parameters Cylindrical grinding- Part2: Specifications JB/T 7418.2-2015 2018-07-20

38 Cylindrical grinding All parametersExternal cylindrical grinding machines-Testing of the Accuracy GB/T 4685-2007 2018-07-20

39 Cylindrical grinding All parametersExternal cylindrical grinding machines Part3：High precision machine tools-Testing of the Accuracy JB/T 7418.3-2014 2018-07-20

40 Cylindrical grinding All parametersExternal cylindrical grinding machines—Safeguarding specifications GB 24384-2009 2018-07-20

41 Crankshaft grinder All parameters Crankshaft grinder-Part 3:Specifications JB/T 2617.3-2017 2018-12-28


No. CNAS L0128


第 12 页共 187 页



42

Surface grinding machines with horizontal grinding wheel spindle and reciprocating table

All parametersSurface grinding machines with horizontal grinding wheel spindle and reciprocating table-Part 2:Specifications JB/T 3382.2-2014

2018-07-20

43


All parameters

Surface grinding machines with horizontal grinding wheel spindle and reciprocating table—Testing of the accuracy—Part 1:Machines with a table surface length of up to 1600 mm GB/T 4022.1-2007

2018-07-20

44


All parametersSurface grinding machines with horizontal grinding wheel spindle and reciprocating table—Safeguarding specifications GB 24385-2009

2018-07-20

45

Surface grinding machines with vertical grinding wheel spindle and reciprocating

All parameters Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Part2: Specifications JB/T 4183.2-2014 2018-07-20


No. CNAS L0128


第 13 页共 187 页



table

46

Surface grinding machines with vertical grinding wheel spindle and reciprocating table

All parameters Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Testing of the accuracy GB/T 6476-2007 2018-07-20

47

Optical projection profile grinding machines

All parameters Optical projection profile grinding machines-Part 3:Specifications JB/T 9912.3-2014 2018-07-20

48

Surface grinding machines with vertical wheel spindle and rotary table

All parameters Surface grinding machines with vertical wheel spindle and rotary table -Part3:Specifications JB/T 9909.3-2014 2018-07-20

49

Surface grinding machines with vertical wheel spindle and rotary table

All parameters Surface grinding machine with vertical spindle and rotary tables-Part2:Testing of the accuracy JB/T 9909.2-2017 2018-12-28

50

External cylindrical centreless grinding

All parameters External cylindrical centreless grinding machines-Part 2:Specifications JB/T 9905.2-2014 2018-07-20


No. CNAS L0128


第 14 页共 187 页



machines

51

External cylindrical centreless grinding machines

All parameters External cylindrical centreless grinding machines—Testing of the accuracy GB/T 4681-2007 2018-07-20

52 Grinder for bearing race All parametersGrinder for bearing race- Part3: Specifications JB/T 4071.3-2007 2018-07-20

53 Grinder for bearing race All parametersGrinding machines for bearing ring-Part 1: Outer surface grinding machines-Testing of the accuracy JB/T 4071.1-2007 2018-07-20

54 Grinder for bearing race All parametersGrinding machines for bearing ring-Part 2: Inner surface grinding machines-Testing of the accuracy JB/T 4071.2-2007 2018-07-20

55

Superfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings

All parametersSuperfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings-Part 2:Specifications JB/T 9921.2-2007

2018-07-20

56

Superfinishing machine for groove of bearing inner rings and superfinishing machine for groove of

All parametersSuperfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings-Part1:Testing of the accuracy JB/T 9921.1-2017

2018-12-28


No. CNAS L0128


第 15 页共 187 页



bearing outer rings

57

Double disc surface grinding machines

All parameters Double disc surface grinding machines -Part2: Specifications JB/T 9907.2-2014 2018-07-20

58

Double disc surface grinding machines

All parametersDouble disc surface grinding machines --Part 3: Double disc surface grinding machines with vertical spindle --Testing of the accuracy JB/T 9907.3-2014

2018-07-20

59CNC bed-type milling machines

All parameters CNC bed-type milling machines-Specifications JB/T 8329-2008 2018-07-20


All parametersTest conditions for CNC copying bed-type milling machines-Testing of the accuracy-Part 1:Milling machines with horizontal spindle GB/T 20958.1-2007

2018-07-20


All parametersTest conditions for CNC copying bed-type milling machines-Testing of the accuracy-Part 2:Milling machines with vertical spindle GB/T 20958.2-2007

2018-07-20

62

Milling machines with table of variable height

All parameters Milling machines with table of variable height- Part2: Technical conditions JB/T 2800.2-2006 2018-07-20

63

Milling machines with table of variable height

All parametersTest conditions for milling machines with table of variable height–Testing of the accuracy-Part2:Machines with horizontal spindle GB/T 3933.2 -2002

2018-07-20

64Milling machines with table of

All parametersTest conditions for milling machines with table of variable height–Testing of the accuracy-Part3:Machines with vertical spindle GB/T 3933.3 -2002

2018-07-20


No. CNAS L0128


第 16 页共 187 页



variable height

65

Numerically controlled vertical milling machines with table of variable height

All parameters Numerically controlled vertical milling machines with table of variable height-Specifications JB/T 9928.2-1999 2018-07-20

66

Numerically controlled vertical milling machines with table of variable height

All parameters

Test conditions for CNC milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle GB/T 21948.2-2008

2018-07-20

67

milling machines with table of fixed height

All parametersTest conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy –Part1:Machines with horizontal spindle GB/T 3932.1-2006

2018-07-20

68

milling machines with table of fixed height

All parametersTest conditions for manually controlled milling machines with table of fixed height-Testing of the accuracy –Part2:Machines with horizontal spindle GB/T 3932.2-2006

2018-07-20

69 Machining centres All parameters Machining centres-Safeguarding specification GB 18568-2001 2018-07-20

70 Machining centres All parameters Machining centers-Specifications JB/T 8801-2017 2018-07-20

71 Machining centres All parametersTest conditions for machining centres —Part1:Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z axis) GB/T 18400.1-2010

2018-07-20

72 Machining All parameters Test conditions for machining centers Part2: Geometric test for 2018-07-20


No. CNAS L0128


第 17 页共 187 页



centres machines with vertical spindle JB/T 8771.2-1998（2009）

73 Machining centres All parametersTest conditions of machining centres-Part 4: Accuracy and repeatability of positioning of linear and rotary axes GB/T 18400.4-2010

2018-07-20

74 Machining centres All parametersTest conditions of machining centres Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets GB/T 18400.5-2010

2018-07-20

75 Machining centres All parametersTest conditions of machining centres Part7：Accuracy of finished test piece GB/T 18400.7-2010 2018-07-20

76Precision machining centres

All parameters Precision machining centres-Specifications GB/T 21012-2007 2018-07-20


All parametersTest conditions for precision machining centres-Part 1: Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z axis) GB/T 20957.1-2007

2018-07-20


All parameters

Test conditions for precision machining centres-Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z axis) GB/T 20957.2-2007

2018-07-20


All parametersTest conditions of precision machining centres-Part 4: Accuracy and repeatability of positioning of linear and rotary axes GB/T 20957.4-2007

2018-07-20


All parametersTest conditions of precision machining centres-Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets GB/T 20957.5-2007

2018-07-20


All parameters Test conditions of precision machining centres-Part 7: Accuracy of a finished test piece GB/T 20957.7-2007 2018-07-20


No. CNAS L0128


第 18 页共 187 页



82Drilling machining centres

All parameters Drilling machining centres-Part 2: Specifications JB/T 8648.2-2008 2018-07-20

83Drilling machining centres

All parameters Drilling machining centres-Part 1:Testing of the accuracy JB/T 8648.1-2008（2017） 2018-07-20

84CNC vertical drilling machines

All parameters CNC vertical drilling machines-Part 2:Specifications JB/T 8357.2-2008（2017） 2018-07-20

85CNC vertical drilling machines

All parameters CNC vertical drilling machines-Part 1:Testing of the accuracy JB/T 8357.1-2008 2018-07-20

86 Radial drilling machine All parameters Radial drilling machine-Part2:Specifications JB/T 6335.2-2006 2018-07-20

87 Radial drilling machine All parametersRadial drilling machines-Testing of the accuracy GB/T 4017-1997 2018-07-20

88 NC jig boring machines All parameters NC jig boring machines-Specifications JB/T 7416-2007 2018-07-20

89 NC jig boring machines All parameters NC jig boring machines-Accuracy GB/T 14660-1993 2018-07-20

90 NC jig boring machines All parametersNC portal-type boring and milling machines-Specification JB/T 6600-2006 2018-07-20

91 NC jig boring machines All parametersMachine tools—Test conditions for bridge-type milling machines—Testing of the accuracy—Part 1:Fixed bridge(portal-type) machines GB/T 19362.1-2003

2018-07-20

92 NC jig boring machines All parametersMachine tools—Test conditions for bridge-type milling machines—Testing of the accuracy—Part 1:Fixed bridge(portal-type) machines ISO 8636-1：2000

2018-07-20

93 Boring and milling All parametersBoring and milling machines with horizontal spindle-Part4: Specification JB/T 4241.4-2006 2018-07-20


No. CNAS L0128


第 19 页共 187 页



machines with horizontal

94

Boring and milling machines with horizontal

All parametersTest conditions for boring and milling machines with horizontal spindle-Testing of the accuracy - Part 1:Machines with fixed column and movable table GB/T 5289.1-2008

2018-07-20

95

Boring and milling machines with horizontal

All parametersTest conditions for boring and milling machines with horizontal spindle-Testing of the accuracy-Part4 :Planer type machines with movable column JB/T 4373-1999

2018-07-20

96Cylinder honing machine

All parameters Cylinder honing machine JT/T 125-2007 2018-07-20

97 Shaping machines All parametersShaping machines- Part3: SpecificationsJB/T 3362.3-2006 JB/T 3362.3-2006 2018-07-20

98

Slideways grinding machines with two columns

All parameters Slideways grinding machines with two columns-Part 2: Specifications JB/T 10578.2-2014 2018-07-20

99


All parameters Slideways grinding machines with two columns-Testing of the accuracy GB/T 5288-2007 2018-07-20

100


All parameters Slideways grinding machines with two columns-Testing of the accuracy ISO 4703:2001 2018-07-20

101 Gear hobbing machines All parameters Gear hobbing machines-Part 2:Specifications JB/T 6344.2-2013 2018-07-20


No. CNAS L0128


第 20 页共 187 页



102 Gear hobbing machines All parametersGear hobbing machines- Testing of the accuracy GB/T 8064-1998 2018-07-20

103 Gear hobbing machines All parameters Gear hobbing machines- Testing of the accuracy ISO 6545:1992 2018-07-20

104Horizontal band sawing machine

All parameters Horizontal band sawing machine-Part 2:Testing of the accuracy JB/T 4318.2-2013 2018-07-20

105Horizontal band sawing machine

All parameters Horizontal band sawing machine-Part 3: Specifications JB/T 4318.3-2013 2018-07-20

106Vertical band sawing machine

All parameters Vertical band sawing machine -Part3：Ordinnary type vertical band sawing machine -Specifications JB/T 9930.3-2015 2018-07-20

107Vertical band sawing machine

All parameters Vertical band sawing machine -Part2：Ordinnary type vertical band sawing machine -Testing of the accuracy JB/T 9930.2-2015 2018-07-20

108 Roll grinding machines All parametersRoll grinding machines-Part 2:Grinding wheel moving style roll grinding machines Specifications JB/T 6340.2-2007

2018-07-20

109 Roll grinding machines All parametersRoll grinding machine-Part 3:Grinding machine with wheelhead moving style-Testing of the accuracy JB/T 6340.3-2008 2018-07-20

110Metalforming machinery-Safety

Safety Metalforming machinery-Safety requirements GB 17120-2012 2018-07-20

1 Hardness General specifications for metalforming machine JB/T 1829-2014 3.9 2018-07-20

2 operating force General specifications for metalforming machine JB/T 1829-2014 3.2 2018-07-20111Metalforming machinery (performance)

3 sound General specifications for metalforming machine JB/T 1829-2014 3.4 2018-07-20


No. CNAS L0128


第 21 页共 187 页



4 rigidity General specifications for metalforming machine JB/T 1829-2014 3.9 2018-07-20

5 Temperature rise General specifications for metalforming machine JB/T 1829-2014 4.9 2018-07-20

6 Cleanliness General specifications for metalforming machine JB/T 1829-2014 3.13 2018-07-20

7 Electrical General specifications for metalforming machine JB/T 1829-2014 4.13 2018-07-20

8 Load test General specifications for metalforming machine JB/T 1829-2014 4.16 2018-07-20

1 straightness Test code of accuracy for metalforming machine GB/T 10923-2009 5.3 2018-07-20

2 flatness Test code of accuracy for metalforming machine GB/T 10923-2009 5.4 2018-07-20

3 parallelism Test code of accuracy for metalforming machine GB/T 10923-2009 5.4.3,5.4.4.2 2018-07-20

4 equidistant Test code of accuracy for metalforming machine GB/T 10923-2009 5.5 2018-07-20

5 axiality Test code of accuracy for metalforming machine GB/T 10923-2009 5.6 2018-07-20

6 contact ratio Test code of accuracy for metalforming machine GB/T 10923-2009 5.6.1 2018-07-20

7 squareness Test code of accuracy for metalforming machine GB/T 10923-2009 5.6.1 2018-07-20

8 runout Test code of accuracy for metalforming machine GB/T 10923-2009 5.6.2 2018-07-20

9 cycle run-out Test code of accuracy for metalforming machine GB/T 10923-2009 6.6 2018-07-20

112Metalforming machinery (accuracy )

10 axial float Test code of accuracy for metalforming machine GB/T 10923-2009 6.7 2018-07-20


No. CNAS L0128


第 22 页共 187 页



11 roundness Test code of accuracy for metalforming machine GB/T 10923-2009 5.2.3 2018-07-20

12 cylindricity Test code of accuracy for metalforming machine GB/T 10923-2009 2018-07-20

13 Position accuracy Test code of accuracy for metalforming machine GB/T 10923-2009 2018-07-20

113Metalforming machinery (sound )

1 sound Metal forming machinery -sound measurement method of sound pressure levels GB/T 23281-2009 2018-07-20

114Metalforming machinery (sound )

1 soundMetal forming machinery - sound measurement method of sound power levels GB/T 23282-2009

2018-07-20

115 Open press All parameters Open press-Part 1:Specifications JB/T 6580.1-2014 2018-07-20

116 Open press All parameters Mechanical press-Safety requirements GB 27607-2011 2018-07-20

117 Open press All parameters Mechanical press–Safety EN 692:2005+A1:2009 2018-07-20

118 Open press All parameters Open front mechanical power presses-Testing of the accuracy GB/T 23280-2009 2018-07-20

119 Open press All parameters Open double-point press: accuracy JB/T 5199-1991 2018-07-20

120 Open press All parameters Open multi working position press: accuracy JB/T 9961-2015 2018-07-20

121Bench mechanical power presses

All parameters Bench mechanical power presses-Part1:Specification JB／T 5247.1-2011 2018-07-20

122Bench mechanical power presses

All parameters Bench mechanical power presses-Part3:Testing of the accuracy JB／T 5247.3-2011 2018-07-20


No. CNAS L0128


第 23 页共 187 页



123Straight-side mechanical power press

All parameters Straight-side mechanical power press-Part 2：Technical requirements JB/T 1647.2-2012(2017) 2018-07-20


All parameters Straight-sided four-point mechanical power press-Testing of the accuracy JB/T 5200-2012 2018-07-20


All parametersStraight sided single or two-point mechanical power presses-Testing of the accuracy GB/T 10924-2009

2018-07-20

126Closed cold extrusion presses

All parameters Closed cold extrusion presses-Specifications JB/T 2936.2-1999 2018-07-20

127

High speed precision straight side press

All parameters High speed precision straight side press-Technical requirements JB/T 10168-2015 2018-07-20

128

Bottom driven double-acting drawing presses

All parameters Bottom driven double-acting drawing presses-Part2:Specifications JB/T 8348.2-2014 2018-07-20

129

Bottom driven double-acting drawing presses

All parameters Bottom driven double-acting drawing presses-Part 1:Testing of the accuracy JB/T 8348.1-2014 2018-07-20

130 Press brakes All parameters Press brakes-Part1:Specifications JB/T 2257.1-2014 2018-07-20

131 Press brakes All parameters Hydraulic press brakes-Safety requirements GB 28243-2012 2018-07-20

132 Press brakes All parameters Plate and edge bending machines-sound limit JB 9976-1999(2009) 2018-07-20


No. CNAS L0128


第 24 页共 187 页



133 Press brakes All parameters Press brakes-Testing of the accuracy GB/T 14349-2011 2018-07-20

134 Plate shear All parameters Plate shear-Specifications JB/T 5197.2-2015 2018-07-20

135 Plate shear All parameters Shears-Safety requirements GB 28240-2012 2018-07-20

136 Plate shear All parameters Bar shearing machines, crocodile shearing machines and plate shearing machines-sound limit JB 9969-1999(2009) 2018-07-20

137 Plate shear All parameters Plate shear-Testing of the accuracy GB/T 14404-2011 2018-07-20

138high pressure metal diecasting units

All parameters Safety requirements for high pressure metal diecasting units GB 20906-2007 2018-07-20

139high pressure metal diecasting units

All parameters Safety of machinery-Safety requirements for pressure metal diecasting units EN 869：2006 2018-07-20

140Hot-chamber die casting machine

All parameters Hot-chamber diecasting machine -Part 3：Technical requirements JB/T 6309.3-2015 2018-07-20

141Hot-chamber die casting machine

All parameters Hot-chamber diecasting machine -Part 2：Testing of the accuracy JB/T 6309.2-2015 2018-07-20

142CNC pipe bending machines

All parameters CNC pipe bending machines-Specifications JB/T 5761.1-1999 2018-07-20


All parameters Pipe bending machines-Specifications JB/T 2671.2-1998 2018-07-20


All parameters Tube bending machines-Part 3:Testing of the accuracy JB/T 2671.3-2010 2018-07-20


No. CNAS L0128


第 25 页共 187 页



145Three-roll plate bending machines

All parameters Three-roll plate bending machines-Part2:Specifications JB/T 3185.2-2014 2018-07-20

146Three-roll plate bending machines

All parameters Three-roll plate bending machines-Part3:Testing of the accuracy JB/T 3185.3-2014 2018-07-20

147 Hydraulic presses All parameters Hydraulic presses-Safety requirements GB 28241-2012 2018-07-20

148 Hydraulic presses All parameters Machine Tools- Safety-Hydraulic Presses EN 693：2001 2018-07-20

149 Hydraulic presses All parameters Hydraulic presses-Specifications JB/T 3818-2014 2018-07-20

150Woodworking machines (Safety )

1 safety Woodworking machines-Safety code GB 12557-2000 GB 12557-2010 2018-07-20

1 electrical Woodworking machines-General specifications GB/T 14384-2010

Except for :dust density

2018-07-20

2 hardness Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

3 temperature Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

4 Rotational speed differenceWoodworking machines-General specifications GB/T 14384-2010


2018-07-20

151Woodworking machines (performance)

5 Feed difference Woodworking machines-General specifications GB/T 14384-2010


2018-07-20


No. CNAS L0128


第 26 页共 187 页



6 operating force Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

7 sound Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

8 no-load power Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

9 Load test Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

10 Vibration Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

11 Rigidity Woodworking machines-General specifications GB/T 14384-2010


2018-07-20

152Woodworking machines(sound )

1 sound Woodworking machines- Measurement method of sound pressure level JB/T 9953-1999 2018-07-20

1 straightness Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

2 flatness Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

3 parallelism Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20153

Woodworking machines(accuracy)

4 equidistant Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20


No. CNAS L0128


第 27 页共 187 页



5 axiality Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

6 contact ratio Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

7 squareness Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

8 runout Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

9 cycle run-out Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

10 repeatability of positioning accuracyAcceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

11 positioning accuracy Acceptance code of accuracy for woodworking machines JB/T 4171-1999 2018-07-20

154Electro-discharge machines

All parameters Electro-discharge machines-Technical requirements for safeguarding GB 13567-1998 2018-07-20

155

Wire electrical-discharge machines (Reciprocating traveling type)

All parameters Wire electrical-discharge machines (Reciprocating traveling type)-Technical requirements JB/T 10082-2010 2018-07-20

156

Wire electrical-discharge machines (Reciprocating traveling type)

All parameters NC reciprocating traveling type wire electrical-discharge machines -Testing of the accuracy GB/T 7926-2015 2018-07-20

157Wire electrical-discharge machines

partial parameters Wire electrical-discharge machines (Unidirectional travelling type)-Technical requirements JB/T 5544-2012Except for :EMC 2018-07-20


No. CNAS L0128


第 28 页共 187 页



(Unidirectional travelling type)

158

Wire electrical-discharge machines (Unidirectional travelling type)

All parameters Wire electrical-discharge machines (Unidirectional traveling type)-Testing of the accuracy GB/T 19361-2003 2018-07-20

159

Wire electrical-discharge machines (Unidirectional travelling type)

All parameters Wire electrical-discharge machines (Unidirectional traveling type)-Testing of the accuracy ISO 14137：2000 2018-07-20

160

Sinking electro-discharge machines

partial parameters Sinking electro-discharge machines-Technical requirements JB/T 4105-2010Except for :EMC 2018-07-20

161

Sinking electro-discharge machines

All parametersDie sinking electro-discharge machines(EDM)-Testing of the accuracy-Part 1:Single column machines(cross slide type and fixed table type) GB/T 5291.1-2001

2018-07-20

162

Mechanical vibration-Balance quality requirements for rotors in a constant(rigid) state

All parametersMechanical vibration-Balance quality requirements for rotors in a constant(rigid) state-Part 1:Specification and verification of balance tolerances GB/T 9239.1-2006

Accredited only for :testing rotor under 500kg (including 500kg)

2018-07-20

163 balancing machines Description verification and evaluation of balancing machines GB/T 4201-2006 6 2018-07-20

164 Industrial 1 safety Robot for industrial environments-Safety requirements-Part 2018-07-20


No. CNAS L0128


第 29 页共 187 页



robots-Safety 1:Robot GB 11291.1-2011

165 Industrial robots-Safety 1 safetyRobots and robotic devices-Safety requirements for industrial robots -Part 1: Robots ISO 10218-1:2011 2018-07-20

166 Industrial robots-Safety 1 safetyIndustrial robots-Safety implementation specification GB/T 20867-2007 2018-07-20

167Industrial robots-performance

1 performance Industrial robots-Performance criteria and related test methods GB/T 12642-2013 2018-07-20


1 performance Manipulating industrial robots -- Performance criteria and related test methods ISO 9283:1998 2018-07-20


1 performance Industrial robot-Detailed implementation specification for performance and related test GB/T 20868-2007 2018-07-20


1 performance Industrial robot-Product acceptance implementation specification JB/T 10825-2008

Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportability

2018-07-20


No. CNAS L0128


第 30 页共 187 页




1 performance Industrial robot-Acceptance rules JB/T 8896-1999


2018-07-20

172General specifications of spot

partial parameters General specifications of spot-Welding robots GB/T 14283-2008

Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration resistance, transportabi

2018-07-20


No. CNAS L0128


第 31 页共 187 页



lity

173laser processing robots

partial parameters General specifications of laser processing robots GB/T 20722-2006


2018-07-20

174 arc welding robot partial parameters General specifications of arc welding robots GB/T 20723-2006

Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability, vibration

2018-07-20


No. CNAS L0128


第 32 页共 187 页



resistance, transportability

175 assembly robots partial parameters General specifications of assembly robots GB/T 26154-2010


2018-07-20

176 assembly robots partial parametersGeneral specifications of assembly robots JB/T 5064-1991 5.6，6.7

Except for :power adaptability, electromagnetic compatibility, environmental and climatic adaptability

2018-07-20


No. CNAS L0128


第 33 页共 187 页



, vibration resistance, transportability

177 transport robots partial parameters General specifications of transport robots JB/T 5063-2014


2018-07-20

178 painting robot partial parameters General specifications of spray-painting robot JB/T 9182-2014

Except for :power adaptability, electromagnetic compatibility, environmental and climatic

2018-07-20


No. CNAS L0128


第 34 页共 187 页



adaptability, vibration resistance, transportability

179

Flexible manufacturing system of off-line programming robots

partial parameters Flexible manufacturing system of off-line programming robots-Part 1:General requirements GB/T 26153.1-2010


2018-07-20

180

Flexible manufacturing system of off-line programming robots

partial parameters Flexible manufacturing system of off-line programming robots-Part 2:Belt grinding manufacturing system GB/T 26153.2-2010

Except for :power adaptability, electromagnetic compatibility, environmental and

2018-07-20


No. CNAS L0128


第 35 页共 187 页



climatic adaptability, vibration resistance, transportability

General machinery and equipment

1 Thickness Specification for minimal thickness of the shell of valves GB/T 26640-2011 3、4 PN≤40MPa 2018-07-20

2 Shell Test Industrial valves-Pressure testing GB/T 13927-2008 5 PN≤40MPa 2018-07-20

3 Back seat Test Industrial valves-Pressure testing GB/T 13927-2008 5 PN≤40MPa 2018-07-20

4 seat Test Industrial valves-Pressure testing GB/T 13927-2008 5 PN≤40MPa 2018-07-20

5 Shell Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20

6 Back seat Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20

7 Low pressure seat Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20

8 High pressure seat Test Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20

9High pressure test of double block and bleed

Valve inspection and testing GB/T 26480-2011 5.3 PN≤40MPa 2018-07-20

10 Mark content Industrial valves-marking GB/T 12220-2015 3 2018-07-20

1 Valve

11 Mark method Industrial valves-marking GB/T 12220-2015 4 2018-07-20


No. CNAS L0128


第 36 页共 187 页



12 Shell Test General requierments for industrial steel valves GB/T 12224-2015 7 PN≤40MPa 2018-07-20

13 seat Test General requierments for industrial steel valves GB/T 12224-2015 7 PN≤40MPa 2018-07-20

14 Performance requirementGeneral requirement for: pressure reducing valves GB/T 12244-2006 6 2018-07-20

15 Performance requirementMethods of performance test for pressure reducing valves GB/T 12245-2006 6 2018-07-20

16 Face-to-face dimensionMetal valves-Face to face,end to end,center to face and ceter to end dimensions GB/T 12221-2005 4 2018-07-20

17 Surface quality evalutionValves cast steel visual quality reqrirements JB/T 7927-2014(2017) 3,4,5 2018-07-20

18 Shell Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28

19 High pressure seat Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28

20 Low pressure seat Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28

21 Back seat Test Valve Inspection and Testing API STD 598-2016 6 PN≤40MPa 2018-12-28

22 Pressure test Specification for Pipeline and Piping Valves API SPEC 6D CHINESE-2014 9 PN≤40MPa 2018-12-28

23flow coefficient and flow resistance coefficient

Valves-Test method of flow coefficient and flow resistance coefficient GB/T 30832-2014 4,5,6,7 PN≤40MPa 2018-07-20

2 Flanged iron gate valves All ParametersGeneral purpose industrial valves--Flanged iron gate valves GB/T 12232-2005 PN≤40MPa 2018-07-20

3Casting iron globe valves and lift check

All Parameters General purpose industrial valves--Casting iron globe valves and lift check valves GB/T 12233-2006 PN≤40MPa 2018-07-20


No. CNAS L0128


第 37 页共 187 页



valves

4

Bolted bonnet steel gate valves for petroleum and natural gas industries

All Parameters Bolted bonnet steel gate valves for petroleum and natural gas industries GB/T 12234-2007 PN≤40MPa 2018-07-20

5Steel globe valves and lift check valve

All Parameters Steel globe valves and lift check valve for petroleum,petrochemical and allied industries GB/T 12235-2007 PN≤40MPa 2018-07-20

6 Steel swing check valve All ParametersSteel swing check valve for petroleum,petrochemical and allied industries GB/T 12236-2008 PN≤40MPa 2018-07-20

7

Steel ball valves for petroleum,petrochemical and allied industries

All Parameters Steel ball valves for petroleum,petrochemical and allied industries GB/T 12237-2007 PN≤40MPa 2018-07-20

8

Flanged and wafer resilient seal butterfly valves

All Parameters Flanged and wafer resilient seal butterfly valves GB/T 12238-2008 PN≤40MPa 2018-07-20

9

Diaphragm valves made of metallic materials

All Parameters Industrial valves--Diaphragm valves made of metallic materials GB/T 12239-2008 PN≤40MPa 2018-07-20

10Cast iron swing check valves

All Parameters Cast iron swing check valves GB/T13932-2016 PN≤40MPa 2018-07-20


No. CNAS L0128


第 38 页共 187 页



11 Iron plug valves All Parameters Iron plug valves GB/T 12240-2008 PN≤40MPa 2018-07-20

12Cast iron and copper alloy ball valves

All Parameters Cast iron and copper alloy ball valves GB/T 8464-2008 PN≤40MPa 2018-07-20

13 pipeline valves All Parameters Specification of pipeline valves GB/T 19672-2005 PN≤40MPa 2018-07-20

14 Wafer type check valve All Parameters Wafer type check valve JB/T 8937-2010(2017) PN≤40MPa 2018-07-20

15 Blow-down valves All Parameters JB/T 6900-1993(2009) PN≤40MPa 2018-07-20

16 Hydraulic control valve All Parameters Hydraulic control valve CJ/T 219-2017 PN≤40MPa 2018-12-28

17Pilot-operated reducing valves

All Parameters Pilot operated pressure reducing valves GB/T 12246-2006 PN≤40MPa 2018-07-20

18

Resilient-seated gate valves for water supply and drainage service

All Parameters Resilient-seated gate valves for water supply and drainage service CJ/T 216-2013 PN≤40MPa 2018-07-20

19Metallic sealing butterfly valve

All Parameters Metallic sealing butterfly valve JB/T 8527-2015(2017) PN≤40MPa 2018-07-20

20

Butterfly valves for water supply and drainage

Part of Parameters Butterfly valves for water supply and drainage CJ/T 261-2015

PN≤40MPa，Except for: sanitation、non-

2018-07-20


No. CNAS L0128


第 39 页共 187 页



destructive testing

21Tee strainers for fluids for pipes

All Parameters Tee strainers for fluids for pipes GB/T 14382-2008 PN≤40MPa 2018-07-20

22 Flexible rubber joint All Parameters Flexible rubber joint CJ/T 208-2005 PN≤40MPa 2018-07-20

23 grooved couplings All Parameters grooved couplings CJ/T 156-2001 PN≤40MPa 2018-07-20

24

Double check valve backflow prevention assembly

All Parameters Double check valve backflow prevention assembly CJ/T160-2010 PN≤40MPa 2018-07-20

25

metallic bellows expansion joints

All Parameters General specification of metallic bellows expansion joints GB/T 12777-2008 PN≤40MPa 2018-07-20

26 Eccentric semi-ball valve Part of Parameters Eccentric semi-ball valve CJ/T 283-2017

PN≤40MPa，Except for: sanitation

2018-12-28

27 Eccentric semi-ball valve Part of Parameters Eccentric semi-ball valve GB/T 26146-2010

PN≤40MPa，Except for: non-destructive testing

2018-07-20

28 Steel plug valves Part of Parameters Steel plug valvesGB/T 22130-2008 GB/T 22130-2008

PN≤40MPa，Except for: Fire resistance

2018-07-20


No. CNAS L0128


第 40 页共 187 页



test

29 Metal-seated ball valve Part of Parameters Metal-seated ball valve GB/T 21385-2008

PN≤40MPa，Except for: Fire resistance test

2018-07-20

30Non-slam nozzle check valve

Part of Parameters Non-slam nozzle check valve CJ/T 255-2007


2018-07-20

31

Resilient-seated gate valves for water supply service

Part of Parameters Resilient-seated gate valves for water supply service GB/T 24924-2010


2018-07-20

32Parallel plane disc gate valves

All Parameters Parallel plane disc gate valves GB/T 23300-2009 PN≤40MPa 2018-07-20

33 Air inbreathe-release valve All ParametersCompound quick air inbreathe-release valve for water supply pipeline CJ/T 217-2013 PN≤40MPa 2018-07-20

34slow closure type check valve

All Parameters General specification of slow closure type check valve for water supply and sewerage CJ/T 154-2001 PN≤40MPa 2018-07-20

35 Flange All Parameters Pipeline valves, technical delivery conditions JB/T 74-2015(2017) PN≤40MPa 2018-07-20

36 Compact steel valves All Parameters Compact steel valves JB/T 7746-2006 PN≤40MPa 2018-07-20

37 Axial flow check valve All Parameters Axial flow check valve GB/T 21387-2008 PN≤40MPa 2018-07-20


No. CNAS L0128


第 41 页共 187 页



38

Liner fluoroplatics for flanged and wafer steel butterfly valve

All Parameters Liner fluoroplatics for flanged and wafer steel butterfly valve GB/T 26144-2010 PN≤40MPa 2018-07-20

39 Drain valve All Parameters Drain valve GB/T 26145-2010 PN≤40MPa 2018-07-20

40Pilot control pressure reducing valve

All Parameters Pilot control pressure reducing valve CJ/T 262-2016 PN≤40MPa 2018-07-20

41Piping compensatory couplings

Part of Parameters Piping compensatory couplings GB/T 12465-2017

PN≤40MPa，Except for :sanitation and Fire resistance test

2018-12-28

42corrugated metal hose assemblies

Part of Parameters General specification for corrugated metal hose assemblies GB/T 14525-2010

PN≤40MPa，Except for : non-destructive testing

2018-07-20

43

Automatic sprink system:Convention valve

All Parameters Automatic sprink system-Part 6:Convention valve GB 5135.6-2018 PN≤40MPa 2018-12-28

44 Valves for power station Part of Parameters Valves for power station NB/T 47044-2014

PN≤40MPa，Except for: High temperature

2018-07-20


No. CNAS L0128


第 42 页共 187 页



，non-destructive testing

45 Hydraulic control valve All Parameters Hydraulic control valve JB/T 10674-2006 PN≤40MPa 2018-07-20

46 Metal-sealed unfurled valve All Parameters Metal-sealed unfurled valve JB/T 10673-2006 PN≤40MPa 2018-07-20

47Bellows sealing steel globe valve

Part of Parameters Bellows sealing steel globe valve JB/T 11150—2011

PN≤40MPa，Except for: non-destructive testing

2018-07-20

48

Steel gate, globe and check valve for the petroleum and natural gas industries(for sizes DN100 and smaller)

Part of Parameters Steel gate, globe and check valve for the petroleum and natural gas industries(for sizes DN100 and smaller) GB/T 28776—2012

PN≤40MPa，Except for: High temperature

2018-07-20

49Bellows sealing steel gate valve

All Parameters Bellows sealing steel gate valve JB/T 11487-2013(2017) PN≤40MPa 2018-07-20

50Slow closure butterfly check valve

All Parameters Slow closure butterfly check valve CJ/T 282-2016 PN≤40MPa 2018-07-20

51

Pneumatic industrial process control valves

All Parameters Pneumatic industrial process control valves GB/T 4213-2008 PN≤40MPa 2018-07-20


No. CNAS L0128


第 43 页共 187 页



All Parameters Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016

Accredited only for:Flow0-800m3/hHead≤250mPower≤150kW

2018-07-20

1 Flow Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20

2 Head Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20

3 Pump efficiency Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20

4 Power Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 4.4 2018-07-20

52 pump

5 The spirit eclipse experimentsRotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 、2 and 3 GB/T 3216-2016 5.8 2018-07-20

53 Submersible pumps Part of items Submersible pumps GB/T 12785-2014

Accredited only for:Flow0-140m3/hHead≤100mPower≤150kWExcept for ：Test of axial force

2018-07-20


No. CNAS L0128


第 44 页共 187 页



1

The electrical engineering settles the son rounds a measurement for to the machine hull insulating electric resistance( measure the cold only)

Submersible pumps GB/T 12785-2014 6 2018-07-20

2

The electrical engineering settles the son rounds a measurement for under the actual and cold direct current electric resistance


3 Bearing the electric voltage experiments Submersible pumps GB/T 12785-2014 14 2018-07-20

4

The biggest grain passes the measurement of the ability


5The sum settles the head of the flow bottom


6The sum settles the pump efficiency of the flow bottom


7 The temperature rises to experiment Submersible pumps GB/T 12785-2014 9 2018-07-20

8 The electrical Submersible pumps GB/T 12785-2014 12 2018-07-20


No. CNAS L0128


第 45 页共 187 页



engineering blocks up to turn to experiment

9

The electric motor gets empty to carry the characteristic measurement


10

The electrical engineering is biggest to turn the measurement


11

The electrical engineering least turns the measurement


12

Pump within the scope of 0.7-1.3 times sums settle the discharge the measurement of the stalk power

Submersible pumps GB/T 12785-2014 10.3.1 2018-07-20

13

The measurement of the electrical engineering noise voice


14

The measurement of the electrical engineering vibration


15 The hot insulates Submersible pumps GB/T 12785-2014 10.3.2 2018-07-20


No. CNAS L0128


第 46 页共 187 页



the measurement of the electric resistance

16

The full circle pounds at to bear the electric voltage experiments

Submersible pumps GB/T 12785-2014 14.3 2018-07-20

All Parameters Tesing methods for screw pumps JB/T 8091-2014


2018-07-20

1 running experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20

2 valve experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20

3 performance experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20

4 NPSH experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20

5 vibration experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20

6 noise experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20

54 screw pumps

7 other experiment Tesing methods for screw pumps JB/T 8091-2014 4.1 2018-07-20

55 pump 1 vibration Methods of measuring and evaluating vibration of pumps GB/T 29531-2013 6 2018-07-20


No. CNAS L0128


第 47 页共 187 页



2 noise Methods of measuring and evaluating noise of pumps GB/T 29529-2013 10 2018-07-20

56 centrifugal pumps All ParametersTechnical specifications centrifugal pumps-class II GB/T 5656-2008


2018-07-20

57 centrifugal pumps All ParametersTechnical specifications centrifugal pumps-class III GB/T 5657-2013


2018-07-20

58Water submersible motor-pumps

All Parameters Water submersible motor-pumps GB/T 24674-2009


2018-07-20

59 Submersible motor-pumps All Parameters Submersible motor-pumps GB/T 25409-2010

Accredited only for:Flow0-140m3/hHead≤100

2018-07-20


No. CNAS L0128


第 48 页共 187 页



mPower≤150kW

60 Diving screw pump All Parameters Diving screw pump JB/T 8645-2011（2017）


2018-07-20

61Submersible pumps for deep well

All Parameters Submersible pumps for deep well GB/T 2816-2014


2018-07-20

62Long shaft deep well pump

All Parameters Long shaft deep well pump GB/T 2816-2014


2018-07-20

63Single rank single suction acentric pump

All Parameters Technical specifications centrifugal pumps-class II GB/T 5656-2008

Accredited only for:Flow0-800m3/h

2018-07-20


No. CNAS L0128


第 49 页共 187 页



Head≤250mPower≤150kW

64Plastic centrifugal pumps

All Parameters Plastic centrifugal pumps JB/T 8688-2013（2017）


2018-07-20

65 Magnetic force acentric pump All ParametersTechnical specifications centrifugal pumps-class II GB/T 5656-2008


2018-07-20

66 Shield acentric pump All ParametersTechnical specifications centrifugal pumps-class II GB/T 5656-2008


2018-07-20

67 Hot-water acentric pump All ParametersTechnical specifications centrifugal pumps-class I GB/T 16907-2014

Accredited only for:Flow0-

2018-07-20


No. CNAS L0128


第 50 页共 187 页



800m3/hHead≤250mPower≤150kW

68Centrifugal pumps for petrochemical

All Parameters Centrifugal pumps for petroleum petrochemical and natural gas industries GB/T 3215-2007


2018-07-20

69 Multi- rank acentric pump All ParametersTechnical specifications centrifugal pumps-class I GB/T 16907-2014


2018-07-20

70 Multi- rank acentric pump All ParametersHigh pressure boiler feed water pump technology conditions JB/T 8059-2008


2018-07-20

71 Inline type centrifugal All Parameters Inline type centrifugal pumps JB/T 6878-2006Accredited only for: 2018-07-20


No. CNAS L0128


第 51 页共 187 页



pumps Flow0-800m3/hHead≤250mPower≤150kW

72centrifugal pump for fresh water

All ParametersLimited values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water GB 19762-2007


2018-07-20

73Miniature centrifugal pump

All Parameters Miniature centrifugal pump JB/T 5415-2013（2017）


2018-07-20

74

The light small single grade centrifugal pump

All Parameters The light small single grade centrifugal pump JB/T 6663-2007


2018-07-20


No. CNAS L0128


第 52 页共 187 页



75

Irrigation and drainage pumps and pump units

All Parametersagriculture and forestry machinery safety technical requirements tractors and 8 parts: irrigation and drainage pumps and pump units GB 10395.8-2006


2018-07-20

76

Compact silent inline deepwell pump water booster equipment for non-negative

All Parameters Compact silent inline deepwell pump water booster equipment for non-negative CJ/T 440-2013

Except for ：Health performance、electromagnetic performance

2018-07-20

77

Water supply equipment of low voice additive pipe pressure

All Parameters Water supply equipment of low voice additive pipe pressure CJ/T 444-2014

Except for： Health performance、electromagnetic performance

2018-07-20

78

Non-negative pressure water supply equipment for water supply

All Parameters Non-negative pressure water supply equipment for water supply network booster pump station in cities and towns CJ/T 415-2013

Except for： Health performance、

2018-07-20


No. CNAS L0128


第 53 页共 187 页



network booster pump station in cities and towns

electromagnetic performance

79 Vertical mixed flow pumps All Parameters Vertical mixed flow pumps JB/T 10812-2007


2018-07-20

80

Non-negative pressure water supply equipment

All Parameters Non-negative pressure water supply equipment CJ/T 265-2016

Except for ：Health performance、electromagnetic performance

2018-07-20

81

Non-negative pressure water supply equipment of integration and intelligence

All Parameters Non-negative pressure water supply equipment of integration and intelligence CJ/T 381-2011


2018-07-20


No. CNAS L0128


第 54 页共 187 页



82Additive pipe pressure water supply devices

All Parameters Additive pipe pressure water supply devices CJ/T 254-2014


2018-07-20

83

Oil seperating and upgrading integrative equipment

All Parameters Oil seperating and upgrading integrative equipment CJ/T 410-2012

Except for ：

material、water quality performance

2018-07-20

84

Non-negative pipe system pressure-increasing water supply equipment

All Parameters Non-negative pipe system pressure-increasing water supply equipment GB/T 26003-2010


2018-07-20

85

Technical conditions of sewage-elevating device

All Parameters Technical conditions of sewage-elevating device CJ/T 380-2011

Except for： material performance

2018-07-20


No. CNAS L0128


第 55 页共 187 页



86

Tank type non-negative pressure water supply devices

All Parameters Tank type non-negative pressure water supply devices CJ/T 302-2008


2018-07-20

87

Grease-water separator for restaurant wastewater

All Parameters Grease-water separator for restaurant wastewater CJ/T 295-2015

Except for： material、water quality performance

2018-07-20

88

Steady pressure compensation type non-negative pressure water supply devi

name: shanghai institute of quality inspection and technical...

Documents