nanjing well rigging co.,ltd 南京韦尔索具有限公司 · 2019. 8. 9. · strap/ratchet tie...
TRANSCRIPT
-
®
NANJING WELL RIGGING CO.,LTD 南京韦尔索具有限公司
-
INTRODUCTIONNANJING WELL RIGGING CO.,LTD has grown up to be a modernized enterprise characterized by manufacture,trade and service,,mainly supply the series of Lifting&Rigging products, such as the polyester sling,chain sling,tie down strap as well as the G80/G100 rigging hardware,we have sufficient supply to meet customers' different demand.
Among which Lifting chain sling G80/G100 manufacture to compliance with EN818-4 Standard.Webbing sling to EN1492-1, ASME B30.9, AS1353 standard ,Round slings to ISO4878,EN1492-2, ASME B30.9, AS4497 standard, and Ratchet strap/Ratchet tie down to EN12195,WSTDA, AS/NZS 4380.2001,G80 components to EN1677 Standard. Moreover,the G80 connecting link and G80 safety hook acquired the CE safety certificate approved by EU and the GS safety certificate approved by Germany.
“Safety first, quality based” business philosphy,adhere to the principles of quality,providing our customers with quality service.
WELL RIGGING sincerely welcome the friends from all over the world to negociate the business.on the basis of equality and manual benifit,making the developing cooperation and invest,develop the rigging market jointly.
Do believe our company is your most truth friend, high quality is your first choice to guarantee your safety,reasonable prices to save your cost.
1
CERTIFICATE
NANJING WELL RIGGING CO.,LTD
BRIEF INTRODUCTION
-
Chain and components are made from alloy steel for greater strength - Incorporates an oblong master link and a looped chain -
Components are powder coated and mechanically assembled - Complete assembly is tested and tagged with the rated capacity
- Resistant against a load's sharp edges that can be abrading to other softer sling materials - The most durable type of sling and
is easily repaired in the event of damage.
The chain sling has the advantage of being durable, very flexible and its length can be made adjustable. These assemblies
employing steel chain are resistant against a load's sharp edges that can be abrading to other softer sling materials. The chain
slings is the most durable type of sling and is easily repaired in the event of damage. Chain slings are ideal for harsh
environments. A chain sling will tolerate a wide range of temperatures; however, compared to other types, it is relatively
expensive and, depending upon the grade of chain used, relatively heavy.
QualityChain is fabricated from a number of materials; however, only certain grades are acceptable to ISO18001 for overhead lifting.
Grades 80 (G80) and 100 (G100) for chain lifting slings are those types that are suitable to ISO18001. The numbers represent
10% of the tensile strength (N/mm2) of the carbon, high (very strong) alloy steel material. Tensile (breaking) strength is
dependent on chain size. The testing and rating methods of chain is highly standardized. Attached fittings should at a minimum
be of like material.
Components and AssemblyChain sling components (master links, chains and hooks) are assembled in one of two ways: Mechanically or welded.
“Mechanically” assembled means that the fittings are attached to the chain with a hammerlock (see picture of components). This
provides the flexibility to change out the fittings later. A “welded” assembly means that all components are permanently welded
together.
A chain sling generally consists of a master link, a chain leg, and some type of terminating fitting such as a hoist hook. Most
chain sling manufacturers use a standardized sling designation using a three letter combination.
2
Oblong Master Link Sling Hook with Latch Grab hook Foundry Hook Self-Locking Latchlock Connecting link
NANJING WELL RIGGING CO.,LTD
CHAIN SLING
-
G100 Components • Forged or welded super alloy steel.
• Suitebale for use with G100 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.
• Meet Stanadard EN1677
• Strict break load test
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
• All load pin are 100% individually inspected and tested.
G100 Chain
25% stronger than G80 chain
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTD
G100 CHAIN SLING
3
-
WLL according to EN818-4
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTD
G80 CHAIN SLING
4
-
G80 Components • Forged or welded super alloy steel.
• Suitebale for use with G80 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.
• Meet Stanadard EN1677
• Strict break load test
• Surface finish:Power plastified Colour:Yellow or Red RAL code: RAL1003 and RAL3020
• All load pin are 100% individually inspected and tested.
G80 Chain
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTD
G80 CHAIN SLING
5
-
WLL according to EN818-4
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTD
G80 CHAIN SLING
6
-
WARNING: Never exceed rated capacity!
Common Hook type: WR1004- G100 CLEVIS SLING HOOK WITH CAST LATCH
G100 RIGGING HARDWARE
NANJING WELL RIGGING CO.,LTD
6
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
A±0.5 B±1.2 E±1 H±2 M±1 L±2
1004-6 0.33 1.4 5.6 7.5 32 18.5 21 68.5 109
1004-8 0.7 2.5 10 9.5 37 25 27.5 88 134
1004-10 1.3 4 16 12 48 28 33.5 105.5 161.5
1004-13 2.3 6.7 26.8 15 59 38 42 134 203
1004-16 3.6 10 40 18.5 70 44 50 160.5 248
1004-20 7 16 64 25 85 52 56 190.5 297
1004-22 12.1 19 76 27 100 66 62 214.5 326
Ultimate load is 4 times the working load limit
• Forged supper alloy steel-Quenched and Tempered• Suitebale for use with G100 Chain• 25% stronger than G80.• Individually prrof tested at 2.5 times Working Load Limit.• 100% Magnaflux Crack Detection.• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.• Meet Stanadard EN1677 Strict break load test• Surface finish:Power plastified Colour: blue RAL code: RAL5015• With Cast latch
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
B±1 D±1 E±2 H±1 Φ M±2 L±2.5
1003-06 0.32 1.4 5.6 16.5 10 18.5 21 20.5 68 111
1003-07 0.4 1.9 7.6 15 11 25.5 26 25 86.9 137
1003-08 0.6 2.5 10 19 11 25 27.5 25 87.6 137
1003-10 1.2 4 16 26 16 29.5 32 35 106.4 171.5
1003-13 2.2 6.7 26.8 33 19 38 43.5 43 134 219
1003-16 3.5 10 40 40 24.5 46 50 51 158 260
1003-20 6.2 16 64 48 27 52 56 55 190 298
1003-22 11.5 19 76 50 29 66 62 60 214 330
1003-26 12.2 26.5 106 60 35 73 75 70 245 376
1003-32 17.5 39.3 157.2 71 39 87 89 81.5 270 458
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for use with G100 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.
• Meet Stanadard EN1677 Strict break load test
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
• With Cast latch
Common Hook type:WR1003- G100 EYE SLING HOOK WITH CAST LATCH
7
-
Common Hook type: WR1005- G100 EYE SELFLOCK HOOK POSITIVE LOCK LATCH IS SELFLOCKING WHEN HOOK IS LOADED
WARNING: Never exceed rated capacity!
Common Hook type: WR1001- G100 CONNECTING LINK
6
Ultimate load is 4 times the working load limit
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
H±1 A±1.5 B±1.5 C±1.5 K±2 L±3
1001-06 0.11 1.4 5.6 7 14 40 16.5 44.5 62.1
1001-07 0.17 1.9 7.6 8.2 18.5 56 22.5 60 80
1001-7/8 0.16 2.5 10 8.5 18.5 54.2 22 59.7 81.7
1001-08 0.18 2.5 10 10 18.5 53 25 63.1 84.1
1001-10 0.34 4 16 12.6 23 64 27.8 71.6 96.8
1001-13 0.68 6.7 26.8 16.5 28 81 36.9 93.4 126.4
1001-16 1.22 10 40 20 33.5 103 40.2 105 145
1001-20 2.13 16 64 25 42 119.5 47.5 125 175
1001-22 3 19 76 27 48 142 53 139 193
1001-26 5.2 26.5 106 32 61 169 63 164 229
1001-32 9.55 29.3 157.2 40 80 218 78 199 279
• Forged supper alloy steel-Quenched and Tempered• Suitebale for use with G100 Chain• 25% stronger than G80.• Individually prrof tested at 2.5 times Working Load Limit.• 100% Magnaflux Crack Detection.• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.• Meet Stanadard EN1677 Strict break load test• Surface finish:Power plastified Colour: blue RAL code: RAL5015• With Cast latch
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
Φ D±1 E±1 F±1 R±2 M±2 N±1 L±3
1005-06 0.5 1.4 5.6 21 43 28 31 110 70 15 141
1005-07 0.72 1.9 7.6 27 52 31 34 127 81 12 162
1005-08 0.9 2.5 10 27 52 36 40 137 90 20 175
1005-10 1.5 4 16 34.5 64.5 45 50 170 108 26 212.5
1005-13 2.7 6.7 26.8 40 80 53.6 66 209 138.5 32.5 270
1005-16 5.7 10 40 50 104 61 75 256 170.5 38 333
1005-20 7.9 16 6460 120 76.5 80 277 192.5 50 369
1005-22 11.2 19 76 70 134 80 104.6 319 205 52 417
G100 RIGGING HARDWARE
NANJING WELL RIGGING CO.,LTD
• Forged supper alloy steel-Quenched and Tempered• Suitebale for use with G100 Chain• 25% stronger than G80.• Individually prrof tested at 2.5 times Working Load Limit.• 100% Magnaflux Crack Detection.• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.• Meet Stanadard EN1677• All load pins are 100% individually inspected and tested• Surface finish:Power plastified Colour: blue RAL code: RAL5015
8
-
Common Hook type: WR1005- G100 CLEVIS SELFLOCK HOOK POSITIVE LOCK LATCH IS SELFLOCKING WHEN HOOK IS LOADED
WARNING: Never exceed rated capacity!
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for use with G100 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.
• Meet Stanadard EN1677
• All load pins are 100% individually inspected and tested
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
Ultimate load is 4 times the working load limit
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
A±0.5 B±1 E±1 F±1 R±2 M±2 N±1 L±3
1006-6 0.5 1.4 5.6 8 32 28 31 96 70 15 131
1006-8 0.9 5 10 9.5 36 36 40 121 90 20 163
1006-10 1.6 4 16 12 46 45 50 144 109 26 196.5
1006-13 2.9 6.7 26.8 15 59 53.5 66 182 138.5 32.5 251
1006-16 5.8 10 40 18.5 70 62 75 220 170.5 38 303
1006-20 8.616 64 25 85 76.5 80 235 192.5 50 337
1006-22 12.1 19 76 25.5 98 80 104.6 271 205 52 386
Common Hook type: WR1007- G100 SWIVEL SELFLOCK HOOK POSITIVE LOCK LATCH IS SELFLOCKING WHEN HOOK IS LOADED
ITEM NO.00
WEIGHT (KG)
WLL (T)
B.L (T)
B±1 C±1 D±0.5 E±1 H±1 M±2 L±3
1007-6 0.6 1.4 5.6 32.5 23 11.5 28 20 70 184
1007-8 1.1 25 10 36 28.5 13 35.5 26 90 226
1007-10 2 4 16 42 35 15.5 45 30 108 269
1007-13 4 6.7 26.8 50 41 17 53.6 43 138.5 327
1005-16 6.8 10 40 61 58 21.5 62 50.5 170 413
1005-20 12.5 16 64 72 63 26 76.5 62 192.5 460
1005-22 17.1 19 76 97 98 33 80 65 205 566
G100 RIGGING HARDWARE
NANJING WELL RIGGING CO.,LTD
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for use with G100 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.
• Meet Stanadard EN1677
• All load pins are 100% individually inspected and tested
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
9
-
Common Hook type: WR1007- G100 SWIVEL SELFLOCK HOOK POSITIVE LOCK LATCH IS SELFLOCKING WHEN HOOK IS LOADED
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for use with G100 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• Meet Stanadard EN1677
• All load pins are 100% individually inspected and tested
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
Common Hook type: WR1008- G100 EYE SLING HOOK
WARNING: Never exceed rated capacity!
Ultimate load is 4 times the working load limit
ITEM NO. WEIGHT (KG) WLL (T) B.L (T)
E±1 Φ±1 D±1.5 M±2 L±3
1008-6 0.15 1.4 5.6 8 13.5 30.5 43.5 73
1008-8 0.3 2.5 10 11 17.5 37 53 93
1008-10 0.79 4 16 13.5 22 48.5 74 129
1008-13 1.67 6.7 26.8 16.5 28 59 96 166
1008-16 2.74 10 40 19 36 75 116 186
1008-20 4.72 16 64 24 43.5 89.5 143 227
1008-22 8.2 19 76 27 48.5 100.5 160.5 260.5
G100 RIGGING HARDWARE
NANJING WELL RIGGING CO.,LTD
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for use with G100 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• Meet Stanadard EN1677
• All load pins are 100% individually inspected and tested
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
A±0.5 B±1.5 E±1 M±2 W±1 L'±2 L±2 Φ
1008-6 0.22 1.4 5.6 7.5 32 8 43.5 24 44.5 75 7.6
1008-8 0.34 2.5 10 9.8 36 11 54 30.5 53 93 9.8
1008-10 0.82 4 16 12.5 46 13.5 72 42 73 128 13
1008-13 1.75 6.7 26.8 15 59 15 96 53.5 92 166 15.8
1008-16 2.88 10 40 18.5 70 19 116 74 99 189 19.5
1008-20 4.84 16 64 24 85 24 143 74 133 224 24
1008-22 8.3 19 76 27 100 27 160.5 90 141 262 28
Ultimate load is 4 times the working load limit
10
-
Harware type: WR1011 - G100 MASTER LINK
WARNING: Never exceed rated capacity!
G100 RIGGING HARDWARE
NANJING WELL RIGGING CO.,LTD
• Forged or welded super alloy steel.
• Suitebale for use with G100 Chain
• 25% stronger than G80.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.
• Meet Stanadard EN1677
• Strict break load test
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
Harware type: WR1011 - G100 MASTER LINK ASSEMBLY • Forged or welded super alloy steel.• Suitebale for use with G100 Chain• 25% stronger than G80.• Individually prrof tested at 2.5 times Working Load Limit.• 100% Magnaflux Crack Detection.• Fatigue tested at 1.5 times Working Load Limit or 20000 cycles.• Meet Stanadard EN1677• Strict break load test• Surface finish:Power plastified Colour: blue RAL code: RAL5015• All load pin are 100% individually inspected and tested.
11
-
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
Surface finish:Power plastified Colour: RED RAL3020 Yellow RAL1003
Common Hook type: WR1007- G80 EYE TYPE SLING HOOK
Common Hook type: WR012 - G80 CLEVIS SLING HOOK WITH CAST LATCH
WARNING: Never exceed rated capacity!
Ultimate load is 4 times the working load limit
G80 RIGGING HARDWARENANJING WELL RIGGING CO.,LTD
Ultimate load is 4 times the working load limit
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
A±0.5 B±1.2 D±1 H±2 L±1 E±2
12-6 0.32 1.12 4.48 8 32 35 23 76 26
12-7/8 0.48 2 8 9.5 37 37 25 86.4 29
12-10 0.95 3.15 12.6 12.5 49 46 31 104 39
12-13 1.8 5.3 21.2 16.5 56.5 56 42.5 128 47.5
12-16 3.4 8 32 21.5 70.5 60 54 150 56
12-20 6 12.5 50 24 77 79 58 180 59
12-22 10.4 15 60 26 91 101 62 213 72
12-26 14.5 21.2 84.8 30 117 115 75 250 101
12-32 27 31.5 126 35 150 140 88 317 124
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: RED RAL3020 Yellow RAL1003
ITEM NO. WEIGHT (KG)
WLL (T) B.L (T)
B±1.5 E±2 D±2 A±3 L±2
13-6 0.3 1.12 4.48 9 21.5 20 20 108
13-7/8 0.4 2 8 11 27.5 24 25 133
13-10 0.9 3.15 12.6 15 27.2 38 38 167
13-13 2.2 5.3 21.2 19 38.5 51 43 213
13-16 3.2 8 32 23 42 62 50 255
13-20 5.8 12.5 50 24 42.6 74.8 63 305
13-22 9.2 15 60 32 70 68 62 348
13-26 13 21.2 84.8 35 84 84 64 394
13-32 18.5 31.5 126 37 102 100 88 480
12
-
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: RED RAL3020 Yellow RAL1003
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
Common Hook type: WR085 EYE GRAB HOOK
Common Hook type: WR056 EYE SLING HOOK
WARNING: Never exceed rated capacity!
Ultimate load is 4 times the working load limit
G80 RIGGING HARDWARENANJING WELL RIGGING CO.,LTD
Ultimate load is 4 times the working load limit
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
Φ±1 D±1 E±1.5 F±1 H±1 L±2 M±2
56-7/8 0.4 2 8 17.5 11 31 23 25.5 118 80
56-10 0.7 3.2 12.8 21.5 12.5 37.5 28 30.5 142 106
56-13 1.32 5.4 21.6 27 17 45 35 37.5 172 127
56-16 2.11 8.2 32.8 30 20 52.5 40 43.5 200 153
ITEM NO. WEIGHT (KG)
WLL (T)
B.L (T)
E±0.5 Φ±1 H±1 R±2 L±2 M±2
85-6 0.14 1.12 4.48 8 13.5 17.9 51.4 75.3 45.5
85-7/8 0.245 2 8 10.8 18 20 61.5 91.2 53
85-10 0.65 3.15 12.6 13 20 29 80 122 71
85-13 1.39 5.3 21.2 16.5 26 42.8 99.7 158 90
85-16 2.2 8 32 20 30.5 47.7 104 169 113
85-20 4.6 12.5 50 25 37.5 56 140 219 143
85-22 8.2 15 60 28 44 68 165 259 160
85-26 9.8 21.2 84.8 30 44 77 188.8 298 171
85-32 19.4 31.5 126 38 57 95 228 361 229
13
-
WARNING: Never exceed rated capacit1y!
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: RED RAL3020 Yellow RAL1003
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack0 Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
Common Hook type: WR738 G80 CLEVIS SELFLOCK HOOK IMPROVED
Common Hook type: WR086 -G80 CLEVIS GRAB HOOK
Ultimate load is 4 times the working load limit
G80 RIGGING HARDWARENANJING WELL RIGGING CO.,LTD
Ultimate load is 4 times the working load limit
ITEM NO. WEIGHT (KG) WLL (T) B.L (T) E±1 A±0.5 H±1 W±1 L±2
86-6 0.25 1.12 4.48 8 8 17.7 21.5 77.3
86-7/8 0.32 2 8 10.5 9.5 18.5 33.5 89
86-10 0.73 3.15 12.6 13 12.5 29 46 126
86-13 1.6 5.3 21.2 16.5 15 42.7 57.5 163.5
86-16 2.8 8 32 19 18.5 45.4 74 183.5
86-20 5 12.5 50 24 23 56 74 219
86-22 6.3 15 60 27 27 68.5 90 254
86-26 14.5 21.2 84.8 30 30 77 102 309
ITEM NO. WEIGHT (KG) WLL (T)
B.L (T)
A±1 B±1 C±2 D±2 E±3 F±3
738-06 0.44 1.12 4.48 8 32 35 28 99 134
738-7/8 0.8 2 8 9.5 38.5 39 39 119.3 161.9
738-10 1.38 3.15 12.6 12.5 48 48 45 142 195
738-13 2.81 5.3 21.2 15 59 60 52.5 180 249
738-16 6 8 32 18.5 77 65 63.3 225 310738-18/20 7.25 12.5 50 24 77 85 86 238 335
738-22 12.8 15 60 25 97.5 83 76 277 392
738-26 21.8 21.2 84.8 30 118 116 96 312 450
738-32 49.6 31.5 126 35 150 140 135 416 589.6
14
-
WARNING: Never exceed rated capacit1y!
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: RED RAL3020 Yellow RAL1003
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack0 Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
Common Hook type: WR738 G80 CLEVIS SELFLOCK HOOK IMPROVED
Common Hook type: WR0737 -G80 EYE SELFLOCK HOOK IMPROVED
Ultimate load is 4 times the working load limit
G80 RIGGING HARDWARENANJING WELL RIGGING CO.,LTD
Ultimate load is 4 times the working load limit
ITEM NO. WEIGHT (KG) WLL (T) B.L (T) Φ±1.5 E±2 E1±1 L1±1 L±3
737-6 0.5 1.12 4.48 21 35 28 110 140
737-7/8 0.88 2 8 25 40 35 136 175
737-10 1.58 3.15 12.6 34.5 48 45 168 213
737-13 3 5.3 21.2 40 65 52.5 207 268
737-16 5.9 8 32 50 65 63 254 332
737-20 7 12.5 50 64.5 85 85 278 360
737-22 12.3 15 60 72 80 76 319 415
737-26 20 21.2 84.8 80 120 96 362 472
737-32 44 31.5 126 105 140 133 470 614
ITEM NO. WEIGHT (KG) WLL (T)
B.L (T)
A±1 B±1 C±2 D±2 E±3 F±3
755-06 0.71 1.12 4.48 32.5 25.5 32 28 152.5 184
755-7/8 1.15 2 8 36 29.5 40 35 189 228
755-10 1.86 3.15 12.6 42 35 50 45 223 268
755-13 3.51 5.3 21.2 50 41 60 52.5 267 324
755-16 7.33 8 32 70 58 65 63 330 416755-18/20 10.3 12.5 50 72 63 82 85 370 452
755-22 17.5 15 60 97 98 85 76 466 564
755-26 23 21.2 84.8 123 115 112 96 544 661
755-32 81 31.5 126 140 147 135 135 679 830
15
-
WARNING: Never exceed rated capacit1y!
• Forged supper alloy steel-Quenched and Tempered
• Suitebale for EN818-2 G80 Chain.
• Individually prrof tested at 2.5 times Working Load Limit.
• 100% Magnaflux Crack0 Detection.
• Fatigue tested at 1.5 times Working Load Limit For 20000 cycles.
• All load pins are 100% individually inspected and tested
• With cast latch
• Surface finish:Power plastified Colour: blue RAL code: RAL5015
Common Hook type: WR32 G80 CLEVIS SELFLOCK HOOK IMPROVED
Common Hook type: WR033 -G80 MASTER LINK G80 RIGGING HARDWARE
NANJING WELL RIGGING CO.,LTD
Standard EN1677-4(supersedes DIN5688-3)
Super alloy steel- Quenched and Tempered
Individually proof test at 2.5 times Working Load Limit
Breakage test and fatigue test
100% magnaflux crack detecttion
Suitable for 1 or 2 legs G80 chain sling as per EN818-4
16
-
Chain Sling - Single Leg
Type: Industry type designation - SOS chain sling
Application: Used for general purpose overhead lifting adaptable for straight
pull, vertical hitches - Ideal for harsh environments such as steel mills,
foundries, and machine shopsMeets or exceeds overhead lifting safety standards under EN818-4 and ASME B30.9
Steel Grade: Made from grade 100 or grade 80
SOG SOF SOO SSS SGG SOHSingle leg,oblong master & Grab hook
Single leg,oblong master & Foundry hook
Single leg & oblong master
Single leg with sling to sling hook
single leg with Grab to Grab hook
single leg with Hammerlock link
Chain Sling type available with the following options:
● Chain Length : 1 to 10m
● Hook Type: Self Locking Sling Hook or Self Locking Swivel Hook
SINGLE LEG WORKING LOAD LIMITS - G80
CHAIN SIZE (mm)
WLL(KG) MASTER LINK DIMENSION (A x B x C)
6 1120 110x60x13
7 1500 110x60x13
8 2000 110x60x16
10 3150 135x75x18
13 5300 160x90x22
16 8000 180x100x26
18 10000 200x110x32
20 12500 260x140x36
22 15000 300x160x40
26 21200 340x180x45
32 31500 350x190x50
SINGLE LEG WORKING LOAD LIMITS - G100
CHAIN SIZE (mm)
WLL(KG) MASTER LINK DIMENSION (A x B x C)
6 1400 110x60x13
7 1900 110x60x13
8 2500 110x60x16
10 4000 135x75x18
13 6700 160x90x23
16 10000 180x100x27
19 14000 200x110x33
22 19000 260x140x36
Master LinkA:Inside LengthB:Inside WidthC:Thickness
Angles of Use
TAB
LE REFER
ENC
E
WARNING: Never exceed rated capacity!
CHAIN SLING - SINGLE LEGNANJING WELL RIGGING CO.,LTD
17
-
Chain Sling - Adjustable Single Leg
Application: Used for general purpose overhead lifting adaptable for straight pull,
vertical hitches- Ideal for harsh environments such as steel mills, foundries, and
machine shops
Meets or exceeds overhead lifting safety standards under EN818-4 and ASME
B30.9Steel Grade: Made from grade 100 or grade 80
WARNING: Never exceed rated capacity!
Type A: Grab hook attached directly to master link Type B: Grab hook attached directly to 1 foot chain
Adjustable leg with latched sling hook - Grab hook
Adjustable Single Leg - With Hammerlock
Adjustable Single Leg - With sling hooks, Grab hook for
length adjustment, attached to 1 foot chain
Adjustable Single Leg - With Hammerlock, Grab hook for length adjustment, attached
to 1 foot chain
Chain Sling type available with the following options:
● Chain Length : 1 to 10m
● Hook Type: Self Locking Sling Hook or Self Locking Swivel Hook
SINGLE LEG WORKING LOAD LIMITS - G80
CHAIN SIZE (mm)
WLL(KG) MASTER LINK DIMENSION (A x B x C)
6 1120 110x60x13
7 1500 110x60x13
8 2000 110x60x16
10 3150 135x75x18
13 5300 160x90x22
16 8000 180x100x26
18 10000 200x110x32
20 12500 260x140x36
22 15000 300x160x40
26 21200 340x180x45
32 31500 350x190x50
SINGLE LEG WORKING LOAD LIMITS - G100
CHAIN SIZE (mm)
WLL(KG) MASTER LINK DIMENSION (A x B x C)
6 1400 110x60x13
7 1900 110x60x13
8 2500 110x60x16
10 4000 135x75x18
13 6700 160x90x23
16 10000 180x100x27
19 14000 200x110x33
22 19000 260x140x36
Master LinkA:Inside LengthB:Inside WidthC:Thickness
Angles of Use
TAB
LE REFER
ENC
E
NANJING WELL RIGGING CO.,LTDCHAIN SLING - Adjustable Single Leg
18
-
Chain Sling type available with the following options:
● Chain Length : 1 to 10m
● Hook Type: Self Locking Sling Hook or Self Locking Swivel Hook
DOS DOG DOF DOHDouble leg chain sling, oblong
master link & latched sling hooks
Double leg chain sling, oblong master link & Grab hooks
Double leg chain sling, oblong master link & Foundry hooks
Double leg chain sling, oblong master link & Hammerlocks
Chain Sling - Double Single Leg
Application:Used for general purpose overhead lifting adaptable for bridle
hitch arrangement with double pick points - Ideal for harsh environments such
as steel mills, foundries, and machine shops
Meets or exceeds overhead lifting safety standards under EN818-4 and ASME
B30.9
Steel Grade: Made from grade 100 or grade 80
DOUBLE LEGS WORKING LOAD LIMITS - G80
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 1120 1600 110x60x13
7 1500 2120 110x60x16
8 2000 2800 135x75x18
10 3150 4250 160x90x22
13 5300 7500 180x100x26
16 8000 11200 200x110x32
18 10000 14000 260x140x36
20 12500 17000 300x160x40
22 15000 21200 340x180x45
26 21200 30000 350x190x50
32 15000 31500 350x190x50
DOUBLE LEGS WORKING LOAD LIMITS - G100
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 1400 2000 110x60x13
7 1900 2650 110x60x16
8 2500 3550 135x75x18
10 2600 4000 160x90x23
13 6700 9500 180x100x27
16 10000 14000 200x110x33
19 14000 20000 260x140x36
22 19000 26500 340x180x45
Master LinkA:Inside LengthB:Inside WidthC:Thickness
Angles of Use
TAB
LE REFER
ENC
E
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTDCHAIN SLING - Double Sling Legs
19
-
CHAIN SLING - Adjustable Double Sling Legs
WARNING: Never exceed rated capacity!
Chain Sling type available with the following options:
● Chain Length : 1 to 10m
● Hook Type: Self Locking Sling Hook or Self Locking Swivel Hook
Type A: Grab hook direactly attached Type B: Grab hook on foot chain
Adjustable 2 leg with latched sling hook - Grab hook
Adjustable 2 Leg - With Hammerlock
Adjustable 2 eg - With sling hooks, Grab hook for length
adjustment, attached to 1 foot chain
Adjustable 2 Leg - With Hammerlock, Grab hook for length adjustment, attached
to 1 foot chain
Chain Sling - Adjustable Double Single Legs
Application:Used for general purpose overhead lifting adaptable for bridle
hitch arrangement with double pick points - Ideal for harsh environments such
as steel mills, foundries, and machine shops
Meets or exceeds overhead lifting safety standards under EN818-4 and ASME
B30.9
Steel Grade: Made from grade 100 or grade 80
DOUBLE LEGS WORKING LOAD LIMITS - G80
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 1120 1600 110x60x13
7 1500 2120 110x60x16
8 2000 2800 135x75x18
10 3150 4250 160x90x22
13 5300 7500 180x100x26
16 8000 11200 200x110x32
18 10000 14000 260x140x36
20 12500 17000 300x160x40
22 15000 21200 340x180x45
26 21200 30000 350x190x50
32 15000 31500 350x190x50
DOUBLE LEGS WORKING LOAD LIMITS - G100
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 1400 2000 110x60x13
7 1900 2650 110x60x16
8 2500 3550 135x75x18
10 2600 4000 160x90x23
13 6700 9500 180x100x27
16 10000 14000 200x110x33
19 14000 20000 260x140x36
22 19000 26500 340x180x45
Master LinkA:Inside LengthB:Inside WidthC:Thickness
Angles of Use
TAB
LE REFER
ENC
E
NANJING WELL RIGGING CO.,LTD
20
-
TOS TOG TOF TOO TOHTriple legs chain sling, oblong master link & latched sling hooks
Triple legs chain sling, oblong master link & Grab hooks
Triple legs chain sling, oblong master link & Foundary hooks
Triple legs chain sling with oblong links
Triple legs chain sling, oblong master link & Hammerlock
Chain Sling type available with the following options:
● Chain Length : 1 to 10m
● Hook Type: Self Locking Sling Hook or Self Locking Swivel Hook
● Shortener: with or without shortener hooks
Chain Sling - Triple Leg
Application: Used for general purpose overhead lifting adaptable for bridle
hitch arrangement with three pick points - Ideal for harsh environments such as
steel mills, foundries, and machine shops
Meets or exceeds overhead lifting safety standards under EN818-4 and ASME
B30.9
Steel Grade: Made from grade 100 or grade 80
3&4 LEG CHAIN SLING WORKING LOAD LIMITS - G80
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 1700 2360 135x75x18
7 2240 3150 135x75x18
8 3000 4250 160x90x22
10 4750 6700 180x100x26
13 8000 11200 200x110x32
16 11800 17000 260x140x36
18 15000 21200 340x180x45
20 19000 26500 350x190x50
22 22400 31500 350x190x50
26 31500 45000 400x200x56
32 47500 67000 460x250x72
3&4 LEG CHAIN SLING WORKING LOAD LIMITS - G100
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 2120 3000 135x75x19
7 2800 4000 160x90x23
8 3750 5300 160x90x23
10 6000 8000 180x100x27
13 10000 14000 200x110x33
16 15000 21200 260x140x36
19 21200 30200 350x190x50
22 28000 40200 350x190x50
Master LinkA:Inside LengthB:Inside WidthC:Thickness
Angles of Use
TAB
LE REFER
ENC
E
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTDCHAIN SLING - Triple Sling Legs
21
-
Chain Sling - Quadruple LegApplication: Used for general purpose overhead lifting adaptable for bridle hitch arrangement with three pick points - Ideal for harsh environments such as
steel mills, foundries, and machine shops
Meets or exceeds overhead lifting safety standards under EN818-4 and ASME
B30.9
Steel Grade: Made from grade 100 or grade 80
12
QOS QOG QOF QOO QOHQuadruple Leg with Oblong master link& Sling Hooks
Quadruple Leg with Oblong master link& Grab Hooks
Quadruple Leg with Oblong master link& Foundary Hooks
Quadruple Leg with Oblong links
Quadruple Leg with Oblong master link& Hammerlocks
Chain Sling type available with the following options:
● Chain Length : 1 to 10m
● Hook Type: Self Locking Sling Hook or Self Locking Swivel Hook
● Shortener: with or without shortener hooks
Master LinkA:Inside LengthB:Inside WidthC:Thickness
Angles of Use
3&4 LEG CHAIN SLING WORKING LOAD LIMITS - G80
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 1700 2360 135x75x18
7 2240 3150 135x75x18
8 3000 4250 160x90x22
10 4750 6700 180x100x26
13 8000 11200 200x110x32
16 11800 17000 260x140x36
18 15000 21200 340x180x45
20 19000 26500 350x190x50
22 22400 31500 350x190x50
26 31500 45000 400x200x56
32 47500 67000 460x250x72
3&4 LEG CHAIN SLING WORKING LOAD LIMITS - G100
CHAIN SIZE (mm)
Capacity at 30~ 45 Degrees
(KG)
Capacity at 45~90 Degrees
(KG)
MASTER LINK DIMENSION (A x B x C)
6 2120 3000 135x75x19
7 2800 4000 160x90x23
8 3750 5300 160x90x23
10 6000 8000 180x100x27
13 10000 14000 200x110x33
16 15000 21200 260x140x36
19 21200 30200 350x190x50
22 28000 40200 350x190x50
TAB
LE REFER
ENC
E
NANJING WELL RIGGING CO.,LTDCHAIN SLING - Quadruple Sling Legs
22
-
POLYESTER SLINGS
1.Lifting slings are generally constructed of Polyester, Nylon, and Polypropylene material and offer several attractive
features, which promote their popularity among rigging products.
2. They are often selected when expensive, highly polished, fragile or delicate loads must be lifted.
3. The softness of the web will not mar, deface or scratch loads, while its flexibility assures a firm, secure grip around the
item being lifted.
4. The lightweight of the material, combined with superb flexibility allows the slings to be quickly and safely handled by
riggers.
5. Nylon slings may stretch 6-8% at rsted capacity, while polyester slings limit stretch to approximately 3% under
similar circumstances
6. Long life cycles may be experienced since synthetic web is unaffected by moisture, mildew, rot and certain
chemicals
7. Polyester should be used in the presence of acids and nylon should be used where alkalis exist. Polypropylene
should be used where acids, slkalis and most of chemical exist status.
8. Synthetic web slings are manufactured from safety factor 5:1, 6: 1, 7:1, 8:1
9. Slings can be fabricated from single or multiple plies, may in- clude accessories such as edge guard, wear pads or
sleeves, and are available in several configurations.
10. We can print PU on surface of sling by customers require, to improve wearable and against high temperature, so
that it could add sling using life.
WARNING: Never exceed rated capacity! 23
-
14
This is the most popular kind of webbing sling, they are made of Polyester, Nylon,Polypropylene, the safety factor from 5:1to 8:1 are available. We make these products according to EN1492-1、AS1353、JB/T8521.1,complied with GS CE safety require. Customers could choice special length base on special require.
S.F 6:1 7:1 8:1
WLL(KG) Stock No Width M.B.S Stock No Width M.B.S Stock No Width M.B.S
1000 EE6010 25/38mm 6T EE 7010 30/50mm 7T EE 8010 50mm 8T
2000 EE 6020 50mm 12T EE 7020 60mm 14T EE 8020 65mm 16T
3000 EE 6030 75mm 18T EE 7030 90mm 21T EE 8030 95mm 24T
4000 EE 6040 100mm 24T EE 7040 120mm 28T EE 8040 120mm 32T
5000 EE 6050 125mm 30T EE 7050 150mm 35T EE 8050 150mm 40T
6000 EE 6060 150mm 36T EE 7060 180mm 42T EE 8060 180m 48T
8000 EE 6080 200mm 48T EE 7080 240mm 56T EE 8080 240mm 64T
10000 EE 6100 250mm 60T EE 7100 300mm 70T EE 8100 300mm 80T
12000 EE 6120 300mm 72T EE 7120 300mm 84T / / /
MEMO JB/T8521.1 EN1492.1 AS1353
Advice
1.Before use, select the correct flat webbing or round sling with regard to its application,
capacity and the surface conditions of the load.
2.Please examine the condition of the webbing sling or round sling.
3.The permissible capacity of the slingsmust not be exceeded.
4.Never shorten a sling by knotting.
5.Flat webbing slings and round slings must not be placed around sharp edges or over rough
surfaces, use wear sleeves and edge protectors where necessary.
6.Flat webbing slings should be applied in such a way, that the carry the load over the full sling
width.
7.Loads may only be placed on slings if damage is precluded. Do not drag slings fromunder
load, position the sling correctly to ensureeasy removal after use.
8.Position slings in such a way, that they hold the load securely.
9.In “chokef” lifts, only use flat webbing sling with rein forced eyes.
10.Using flat webbing slings with eyes, the eye opening angle should not exceed 20。at the
connecting point.
Conformity EC Council Direcive 2006/42/EC Machinery
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTDFLAT WEBBING SLING
24
-
Round sling is a continuous loop made from polyesier yarn encased in a sleeve of polyester or Nylon fabric. The sleeve is so constructed that it protects the internal rows of yarn fila- ment and keeps them in a parallel formation at all times.
The yarn fibre core is free to spread out into a flat shape where the Round sling is in contact with its load. This pro- vides a broad support, which cushions the load against dam- age and reduces slipping. The low stretch characteristics of the polyester yarn also prevent load bounce’ when hoisting very heavy weights
Manufactured to EN 1492-2, conforming to the CE GS, ISO4878, JB/T 8521.
Stock No. Color WLL
SWL、WLL(t)、M、CC Double Multi-set SWL(t)
Vertical ChokerVertical Choker Vertical Choker Vertical
0-7° 7-45° 45-60°
-
Fixed length Loose end length
Total length 总长
Ratchet lashing are used for fixation cargo while transporting, shifting or moving. storage.After locking, no relax during transportation, safety, saving, light, easy to use. and no damage for cargo.
Material: Polyester NylonManufactured to EN 12195-2 AS/NZS 4380 Working length: As specifiedTemperature range: -40℃-100℃
Loose end length by customers requires. Safety factor : Complete system = factor 2 Accessories / metal loops = factor 2 Non-sewn Webbing sling = factor 3
Warning:1.Only use undamaged ratchet lashing, the label indicating the capacity must be clearly legible.
2.Ratchet lashings should not be used as a load lifting gear.3.Donot place loads on the ratchet lashing, which could cause damage. 4.Ratchet lashings must not be overload.5.Avoid twisted positioning of the ratchet lashing. 6.Do not tie knots in the webbing.7.Protect the webbing against abrasion andior cutting by using edge protectors and sleeves for sharp edges.
Webbing width
Lashing Capacity (daN)
Complete System
M.B.S(kg)
Fixed Length (m) LC(daN) LC(daN) LC(daN)
25mm 400 800 0.3 400 800 80025mm 500 1000 0.3 500 1000 1000
25mm 750 1500 0.3 750 1500 1500
35mm 1000 2000 0.3 1000 2000 200035mm 1500 3000 0.3 1500 3000 3000
50mm 1500 3000 0.3 1500 3000 3000
50mm 2000 4000 0.5 2000 4000 400050mm 2500 5000 0.5 2500 5000 5000
75mm 3500 7000 0.7 3500 7000 7000
100mm 5000 1000 0.7 5000 1000 10000
Technical information
WARNING: Never exceed rated capacity!
NANJING WELL RIGGING CO.,LTDRATCHET TIE DOWN
26
-
WARNING: Never exceed rated capacity!
RATCHET TIE DOWNNANJING WELL RIGGING CO.,LTD
Complete Set of System Webbing
Item No M.B.S.(KG) LC(daN) Width(mm) M.B.S.(KG)
WR25-010 800 400 25 1000
WR25-012 1000 500 25 1200
WR35-020 1600 800 35 2000
WR35-025 2000 1000 35 2500
WR35-030 2400 1200 35 3000
WR38-030 2400 1200 38 3000
WR38-040 3200 1600 38 4000
WR50-045 3600 1800 50 4500
WR50-050 4000 2000 50 5000
WR50-062 5000 2500 50 6200
WR50-075 6000 3000 50 7500
WR75-075 6000 3000 75 7500
WR75-095 7500 3750 75 9375
WR100-100 8000 4000 100 10000
WR100-125 10000 5000 100 12500
According to EN12195-2、GB/T 23914.2
27
-
NANJING WELL RIGGING CO.,LTD
®
NANJING WELL RIGGING CO.,LTD南京韦尔索具有限公司
Add:No.216 Puliu North Road,Getang Street,Jiangbei New Area,Nanjing City,China.
Email:[email protected]
www.wellrigging.com