naveed anwar cv

8/20/2019 Naveed Anwar CV

1/22

Naveed AnwarAssociate Director

ACECOMSSchool of Engineering and Technology

AIT, P.O. Box 4, Klong LuangPathumthani 12120, THAILAND

e-mail: [email protected]

Ph: (662) 524-5533, 524-5539Fax: (662) 524-6059

Date of Birth December 31, 1958

Sex Male

Nationality Pakistani

Passport No. KB 783876

Marital Status Married, two children

Permanent Address Darul Rehmat, Norgate StreetCantt. Road, Sialkot, PAKISTAN(P.O. BOX 182)Ph: (92-432) 558971

Professional

Qualifications

• Doctor of Engineering, Structural EngineeringAsian Institute of Technology, Bangkok

• M. Eng., Structural EngineeringAsian Institute of Technology, Bangkok

• B.Sc. Civil EngineeringUniversity of Engineering & Technology, Lahore, Pakistan

Professional

Affiliations

• Professional Engineer, P.E., Pakistan Engineering Council

• Consulting Engineer, C.E., Pakistan Engineering Council

• Member, American Concrete Institute (ACI)

• Member Association for Computing Machinery (ACM)

• Member Computer Society (IEEE)

• Member International Association of Bridge and StructuralEngineers (IABSE)

• Member, Institute of Engineers Pakistan

• Member, New York Academy of Sciences

• Listed in International Who’s Who of Professionals, 1998

Languages English : Read, Write, SpeakUrdu : Read, Write, Speak Thai : Speak

CV Naveed Anwar-2007 1 of 22

mailto:[email protected]:[email protected]


2/22


Award and Honor • Award of Appreciation from Angeles University Foundation,

Angeles City, Philippines during International Seminar onGraphical Modeling for Structural Analysis and Design andDetailing and Pushover Analysis for Performance BasedDesign of Buildings for being key speaker on title GraphicalModeling for Structural Analysis, Design and Detailing andPushover Analysis for Performance Based Design of

Buildings , dated 18 Oct 2006• Award of Appreciation from Angeles University Foundation,

Angeles City, Philippines during International CivilEngineering Education Congress 2006 and 7th National Civil

Engineering Education Congress 2006 as keynote speakeron title Visualization Techniques for Innovative Teaching andLearning , dated 19 Oct 2006

• Award of Appreciation from Association of StructuralEngineers of the Philippines Inc, Philippines during ACEE2006 2nd Asia Conference on Earthquake Engineering askey speaker on title Seismic Analysis and Design ofBuildings and Effective Modeling and Seismic Design of

Bridge Structures , dated 10-11 March 2006• Award of Appreciation from The Institute of Engineering,

and University of Malaysia Sarawak, Malaysia duringWorkshop on Computer Aided Analysis and Design keyspeaker on title Finite Element Analysis and Design of RCBuildings , dated 25-26 May 2005

• Award of Appreciation from Mapua Institute of Technology,Manila, Philippines during International Seminar onComputations in Civil Engineering as key speaker on title Computations in Civil Engineering , dated 23 May 2005

• Award of Appreciation from Association of StructuralEngineers of the Philippines Inc, Philippines during 11th

ASEP International Convention as speaker on title IntegratedFlexural Design for Serviceability, Strength and Performance ,dated 20-21 May 2005

• Award of Appreciation from Angeles University Foundation,

Angeles City, Philippines during Regional Seminar in CivilEngineering Computations as keynote speaker on title inCivil Engineering Computations , dated 19 May 2005

• Award of Appreciation from Civil Engineering Dept. U.E.T.Lahore, Pakistan during International Seminar on ComputerAided Analysis and Design of Structures as guest speakeron title Computer Aided Analysis and Design of Structures ,dated 5 April 2005

• Award of Appreciation from Philippine Institute of CivilEngineers Inc, Cebu, Philippines during Annual GeneralMembership Meeting as key speaker on title VariousComputer Applications for Civil Engineering , dated 30 for

Civil Engineering , dated 30 September 2004

• Award of Appreciation from University of SanJoseRecoletos, Cebu, Philippines during Seminar on Finite

Element Analysis of Structures as key speaker on title FiniteElement Analysis of Structures , dated 29 September 2004

• Award of Appreciation from Association of StructuralEngineers of the Philippines Inc, Philippines during

Seminar on Analysis and Design of RC Structural Systems askey speaker on title Analysis and Design of RC StructuralSystems , dated 25 September 2004

•


3/22

• Award of Appreciation from Association of StructuralEngineers of the Philippines Inc, Philippines duringSeminar on Performance Based Design and Push-OverAnalysis of Buildings as key speaker on title PerformanceBased Design and Push-Over Analysis of Buildings , dated18-19 June 2004

• Award of Appreciation from De La Salle University, College

of Engineering, Philippines during International Seminar onModeling, Analysis and Design of Bridge Structures as key

speaker on title Modeling, Analysis and Design of BridgeStructures , dated 22-23 August 2003

• Award of Appreciation from De La Salle University, Collegeof Engineering, Philippines during International Seminar onFinite Element Analysis of Structures as key speaker on title Finite Element Analysis of Structures Strengthening andRetrofitting of Concrete Structures , dated 7-8 March 2003

• Award of Appreciation from The Institution of Engineers,Malaysia during A 2-Day Intensive Course on "Practical

Computer Modeling and Design of High Rise Buildings to

BS8110 from Consulting Engineer's Perspective as keyspeaker on title Practical Computer Modeling and Design ofHigh Rise Buildings to BS8110 from Consulting Engineer's

Perspective , dated 23-24 August 2002

• Award of Appreciation from De La Salle University, Collegeof Engineering, Philippines during International Seminar on"Advanced Integrated Analysis and Design of Tall Buildings"as key speaker on title Advanced Integrated Analysis andDesign of Tall Buildings , dated 4-5 June 2002

• Award of Appreciation from University of Engineering and Technology, Lahore, Pakistan during International Seminaron Computer Aided Analysis and Design as key speaker on

title Computer Aided Analysis and Design , dated 1-2 August2002

• Award of Appreciation from NED University of Engineeringand Technology, Karachi, Pakistan during InternationalSeminar on Computer Aided Analysis and Design as keyspeaker on title Computer Aided Analysis and Design , dated18-19 January 2002

• Award of Appreciation from The Institution of Engineers,Malaysia during Seminar on Computer Aided Analysis andDesign of Concrete Structures as key speaker on title Computer Aided Analysis and Design of Concrete Structures ,dated 9-10 May 2001

• Award of Appreciation from Baguio Colleges Foundation,Baguio, Philippines during International Workshop on

Integrated Analysis and Design of Buildings in 3D as keyspeaker on title Integrated Analysis and Design of Buildingsin 3D , dated 21-22 November 2001

• Award of Appreciation from Cor Jesu College, Digos, DavaoDel Sur and Philippine Institute of Civil Engineers,Philippines during PICE-IBC Mindanao Regional TechnicalSeminarin 3D as key speaker on title An IntergratedOverview of Structural Engineering and Structural Design ,dated 28 April 2001



4/22

• Award of Appreciation from Industry-AcademiaCooperation, Philippines during 4th National CivilEngineering Education Congress as key speaker on titleComputer Applications in Civil Engineering , dated 2-4 May2001

• Award of Appreciation from Tarumanagara University, Jakarta, Indonesia during International Workshop on

Structural Analysis and Design of Concrete Structures as keyspeaker on title Structural Analysis and Design of ConcreteStructures , dated 13-14 July 2000

• Award of Appreciation from Baguio Colleges Foundationand Philippine Institute of Civil Engineers, Philippinesduring International Seminar on Computer Aided Analysisand Design as guest speaker on title Computer AidedAnalysis and Design , dated 8 August 2000

• Award of Appreciation from Cor Jesu College, Digos, DavaoDel Sur and Philippine Institute of Civil Engineers,Philippines during International Seminar on Computer Aided

Analysis and Design of Structures as key speaker on title

Computer Aided Analysis and Design of Structures , dated 2-3 August 2000



5/22

Research and Publications

Academic Research • Naveed A., Component-Based InformationOriented Framework for Integrated StructuralEngineering Applications, AIT Diss no. ST-04-1,2004, Asian Institute of Technology Bangkok

• Naveed A., Effects of Point of Load Applicationon the Lateral Instability and Post BucklingBehavior of Zee and Channel Shaped Beams .AIT Thesis no. ST-88-3, 1988, Asian Institute of Technology Bangkok

• Naveed A., Use of Micro Computers in StructuralEngineering , B.Sc. Research Project, 1982,University of Engineering. & Technology,Lahore

Academic Advisory • Siriluck B., Seismic Behavior of Steel Beam-

Column Connections with Knee Braces AIT Thesis no.ST-06-03, 2006, Asian Institute of

Technology Bangkok

• Danny P., Development of a Software Package for Deformation Adaptive Mesh Based onKringing Interpolation, AIT Thesis no.ST-06-07,2006, Asian Institute of Technology Bangkok

• Sisillia W., Investigation of An IsoparametricElement Based on Kriging Shape Functions, AIT Thesis no.ST-06-08, 2006, Asian Institute of Technology Bangkok

•

Zeeshan M., An Adaptive Mesh Generation forKriging Element Free Galerkin Method Based onDelaunay Triangulation, AIT Thesis no.ST-06-10, 2006, Asian Institute of TechnologyBangkok

• Citra W., Dynamic Analysis Using Kriging- Based Finite Element Methods, AIT Thesisno.ST-06-15, 2006, Asian Institute of Technology Bangkok

• Pattira T., Bleeding and Abrasion Resistance ofMortars Containing Different Pozzolans, AIT Thesis no.ST-06-01, 2006, Asian Institute of

Technology Bangkok

• Nang K. K. O., Risk Approaches For MakingGo/No-Go Decision for Thai ConsultingEngineering Firms/Companies, Masters Thesis,2006, Asian Institute of Technology Bangkok

Paper Reviewed • Aiping Tang and Aihua Wen, “ An IntelligentSimulation System for Earthquake DisasterAssessment” for Journal of Computers &Geosciences (2007)

• Proliferation of the Tallest Building Syndrome:

A Global Prospective” for Pakistan Journal of



6/22

Engineering & Applied Sciences, 2007

Books • Kanok-Nukulchai W., Munasinghe S. andNaveed A. "Emerging Trends: Keynote Lecturesand symposia", 2006, Proceeding of EASEC-10Conference, ISBN 974-8257-22-3.

• Kanok-Nukulchai W., Munasinghe S. andNaveed A. "Analytical and ComputationalMethods", 2006, Proceeding of EASEC-10Conference, ISBN 974-8257-21-5.

• Kanok-Nukulchai W., Munasinghe S. andNaveed A. "Wind and Earthquake Engineering",2006, Proceeding of EASEC-10 Conference,ISBN 974-8257-23-1.

• Kanok-Nukulchai W., Munasinghe S. andNaveed A. "Real Structures: Bridges and TallBuildings", 2006, Proceeding of EASEC-10

Conference, ISBN 974-8257-17-7.

•

Kanok-Nukulchai W., Munasinghe S. andNaveed A. "Construction and ProfessionalPractices", 2006, Proceeding of EASEC-10Conference, ISBN 974-8257-20-7.

• Kanok-Nukulchai W., Munasinghe S. andNaveed A. "Materials, Experimentation,Maintenance and Rehabilitation", 2006,Proceeding of EASEC-10 Conference, ISBN974-8257-18-5.

• Kanok-Nukulchai W., Munasinghe S. andNaveed A. "Supplementary Papers", 2006,Proceeding of EASEC-10 Conference, ISBN

974-8257-25-8.• Naveed A., “Column Design – Concrete, Steel

and Composite” 2004. (Inscription under

progress).

• Naveed A., Kanok-Nukulchai W. “BangkokBridges” 2004. (Inscription under progress).

• Naveed A., “Computing Methods, Techniquesand Paradigms for Structural EngineeringSoftware”, 2003, Asian Center for EngineeringComputation and Software, (Technical Note).

• Naveed A., “Selection and Preliminary Design of

Slab Systems”, 2003, Asian Center forEngineering Computation and Software,(Technical Note).

• Naveed A., Buddhi S.S., “Handbook for Designof Steel Members”, 2003, Asian Center for

Engineering Computation and Software,(Technical Note).

• Naveed A., “Understanding Cross-Sections”,2002, Asian Center for Engineering

Computations and Software, AIT, ISBN 974-8208-44-3

User and Technical Author of Several User and Technical Manuals for



7/22

Manuals engineering software, with a total of over 1000

pages.

Special Seminar & Workshop

• Computer Aided Analysis, Design & Detailing ofFoundation and Slab Systems Using SAFE

• Seismic Analysis and Design of RC Building

• ConPrime-1 Buildings : Modeling-Analysis- Design

• ConPrime-2 Finite Element : Concepts-Modeling- Applications

• ConPrime-3 Bridges : Modeling-Analysis-Design

• Computer Aided Modeling, Analysis & Design ofOffshore Platforms

Software Manuals

•

BATS 2001: User Manual• BATS 2001: Tutorial Examples

• GEAR 2003: User Manual

• GEAR 2003: General Tools and GeometricProperties

• GEAR 2003: RC Utilities and RC Members

• GEAR 2003: Steel Members

• GEAR 2003: Foundations

• GEAR 2003: Tutorial Examples

• GRASP: User Manual

• SYSDesigner: User Manual

• Co-author of “SYS Steel Designers Manual”, atechnical reference, 200 pages

Technical Reports Several Technical Project Reports with total of over1000 pages

• Software Development for Steel RoofingSystems , for Siam Cement Group ofCompanies, Thailand, 2004-2006.

• Investigation on Masonry Wall Problems, forShinawatra University (Pathumthani Campus) , Thailand, 2006

• Investigation of Pile Damage at Siam KerrySeaport , for Cunningham Linsey (Thailand)Ltd., Thailand, 2005

• The second Mekong International BridgeConstruction Project , for McLarens YoungInternational, Thailand, 2005

• Evaluation and Remedial Measure: Factory

Settlement (Oil heating area/chip plant) , forPolyplex (Thailand)Public Co. Ltd., Thailand,



8/22

2005

• Design Review of Precast House , for SiahBrothers Corporation Berhad, Malaysia, 2004

• Wind Effects on Steel Tube Mast for II AirportBangkok , for Chue Chin Hua Co., Ltd., Thailand, 2004

• Evaluation and Remedial Measures for FireDamage , for Electrowatt-Ekono (Thailand) Ltd., Thailand, 2003

• Investigation and Remedial Measures: Floor andFoundation Problems of ECCO Tannery Factory,Ayuthaya , for Christiania & Nielsen (Thai)Public Co., Ltd., Thailand, 2003

• Design of Expressway Expansions And Trainingof Bridge Engineers , for Expressway and Rapid Transit Authority (ETA), Thailand, 2003

• Structural Design and Architectural Drawings ofSialkot Chamber's "Display Centre" , for The

Sialkot Chamber of Commerce and Industry,Pakistan, 2003

• Requirement of Roof-Truss Designing Program ,for CPAC, Thailand, 2003

• BTS Noise Barrier , for Bangkok Mass TransitSystem Public Company Ltd., 2003

• Strain Measurement in Facade Structural Work,Terminal Building, Suvarnabhumi Airport , forASI Asiatic Co.,Ltd., 2003

• Semtokha Rongchu Bridge , for Dept. of Road,Ministry of Communication Royal Government,Bhutan, 2002

• Ngabi Rongchu Bridge Analysis and Design , forDept. of Road, Ministry of CommunicationRoyal Government, Bhutan, 2002

• Investigation and Remedial measure for thecracks on Cooling Tower RC Beams , for BowinPower Company Limited, Thailand, 2002

• Analysis and Review of four structures ofcement manufacturing plant , for Unity

Engineering Consultants Co. Ltd., Thailand,2002

• Tesco Lotus, Ladprao , for ACTEC Co. Ltd., Thailand, 2002

• Development of Web Portal Platform, AsianCities On-Line on EnviroNet , for CITYNET,

Japan, 2001-2002

• Structural Design of Residential Building-RCHouse , for Preuksa Real Estate Co.,Ltd., Thailand, 2000

•

Puna Tsang Chhu Bridge , for Dept of Road,Ministry of Communication Royal Government,



9/22

Bhutan, 2000

• Stripping Structure, TSL-Polybutadiene Rubber ,Rayong, for Toyo-Thai Corporation Ltd., Thailand, 1997

• Investigation Into the Usage of InterlockingCement Blocks as Load Bearing Walls and

Columns , for Nichada Thani Group ofCompanies, Thailand



10/22

Teaching and Trainings

Summary Main speaker and resource person in over 100Seminars and Workshops conducted in 15 countriesand attended by over 3,000 engineers from 20countries, including; Thailand, Malaysia, MyanmarBangladesh, Sri Lanka, Indonesia, Laos, Vietnam,

Philippines, Cambodia, Bhutan, and Nepal.

Teaching Courses • Applied Computational Methods: Numerical Technique and Software

• Advanced Topics in Bridge Engineering

• Computer Methods of Structural Analysis

• Tall Buildings

• Modeling and Analysis of Bridges

Workshops and Seminars on

Computer Application inCivil Engineering

ConPrime

• Buildings Modeling-Analysis-Design (ConPrime1) atAIT, Thailand, 1-8 March 2005

• Finite Element: Concept Modeling and Applications(ConPrime2) at AIT, Thailand, 14-22 June 2005

• Modeling, Analysis & Design of Bridge Structures(ConPrime3) at AIT, Thailand, 27 Feb-4 Mar 2005

Customized

• Computer Applications in Civil Engineering atPeshawar, Pakistan, 7 April, 2005

• Computer Applications in Civil Engineering atUniversity of Engineering & Technology, Taxila,

Pakistan, 6 April, 2005• Computer Applications in Civil Engineering at

Lahore, Pakistan, 5 April, 2005

• Special Lecture: Computer Aided Analysis & Designof Structures at Quezon, Iligan, Manila,Philippines, 2001

IS-CAAD

• Modeling, Analysis and Design of Buildings,Manila, Philippines, 19 March 2007

• Effective Modeling, Analysis and Design UsingETABS, Manila, Philippines, 21 Oct 2006

• Graphical Modeling for Structural Analysis, Designand Detailing, Angeles City, Philippines, 18 Oct2006

• Pushover Analysis for Performance Based Design ofBuildings, Angeles City, Philippines, 18 Oct 2006

• Finite Element Analysis and Design of RCBuildings at Sarawak, Malaysia, 25-26 May 2005

• International Seminar Computer Aided Analysisand Design of Structures at Angeles UniversityFoundation, Pampanga, Philippines, 19 May,2005

• Performance Based Design and Push-over Analysis

of Buildings at Manila and Cebu, Philippines, 2004• Special Presentation on National Meeting on



11/22

"Structural Analysis" at Yogyakarta, Indonesia,2004

• Innovative Ways of Teaching Civil Engineering,Cebu, Philippines, 2004

• Overview of Computer Aided Modeling, Analysisand Design of Structures, Cebu, Philippines,2004

•

Structural Evaluation and Retrofit of ExistingBuildings, AIT, Thailand, 2004

• Finite Element Modeling and Analysis of Structuresat AIT, Bangkok, 2004

• Computers and Structures Convention at ManilaPhilippines, 2003

• Integrated Analysis and Design of Tall Buildings atDhaka, Bangladesh/Cebu, Philippines, 2003

• Modeling, Analysis & Design of Bridge Structures,Manila Philippines, 2003

• Integrated Analysis and Design of Buildings withSpecial Emphasis on Design of Shear Wall and MatFoundation, Baguio, Philippines, 2003

• Computer Aided Analysis & Design of Structures atKarachi, Pakistan/Bungdung, Indonesia/Lahore,Pakistan, 2002

• Finite Element Analysis of Structures, Dhaka,Bangladesh, 2002

• Integrated Analysis and Design of Tall Buildings atManila, Philippines/ Kuala Lampur, Malaysia,2002

• Computer Aided Analysis and Design of TallBuildings at Kuala Lumpur, Malaysia, 2002

• Advanced Integrated Analysis and Design of TallBuildings at Penang, Malaysia/Johor Bahru,Malaysia/Bangkok, Thailand, 2002

• Finite Element Analysis at AIT, Thailand, 2001

• Computer Aided Analysis & Design of Structures atKhonkaen, Thailand/Kuala Lampur, Malaysia,Surabaya, Indonesia/Lagos, Nigeria/Dhaka,Bangladesh/Yogyakarta, Indonesia, 2001.

• Modeling, Analysis and Design of Segmental BoxGirder Bridges, Phnom Penh, Cambodia, 2001

• Modeling and Analysis of Structures in 2D Design

of RC Beams and Columns Integrated Analysis andDesign of Frames and Buildings, Phnom Penh,Cambodia, 2001

• Computer Aided Analysis & Design of Structures atSaipan, United State/Cebu, Philippines/Manila,Philippines/ Iligan, Philippines/Vientiane, LaoPDR/Hanoi, Vietnam/Yangon, Myanmar/Columbo,Srilank/Phnom Penh, Cambodia/Jakarta,Indonesia/Davao, Philippines/Baguio,Philippines/Hochi Minh, Vietnam/Bangkok, Thailand, 2000

IW-CAAD

• Finite Element Analysis and Design using SAP2000, AIT, Bangkok, Thailand, 28-29 Nov 2006



12/22

• Real Project Based Hands-on Training onStructural Design of 27 Story RC Building atBangkok, Thailand, 4-6 Oct 2005

• Seismic Analysis and Design of RC BuildingsBuilding at Bangkok, Thailand, 26-28 April 2005

• Training for Cebu Associate Center TechnicalSupport Engineers at AIT, Thailand, 2004

• Hands-on Training on Modeling, Analysis andDesign of RC Buildings at AIT, Thailand, 2004

• Finite Element Analysis of Structures at AIT, Thailand, 2004

• Computer Aided 3D Modeling, Analysis and Designof Buildings at Penang, Malaysia, 2004

• Computer Aided Analysis and Design of WaterRetaining RC Structure at AIT, Bangkok, 2004

• Analysis and Design of Bridges at Moratuwa,Srilanka, 2004

•

Finite Element Analysis of Structures at Cebu,Philippines. 2004

• Computer Aided Analysis and Design of Structures(Advanced level) at Bangkok, Thailand, 2004

• Design and Construction of UndergroundStructures (Tunnels) at Bangkok, Thailand, 2004

• Design, Construction and Maintenance ofElectricity & Telecommunication Towers atBangkok, Thailand, 2004

• Analysis and Design of Reinforced Concrete,Prestressed and Steel High Rise Buildings atDhaka, Bangladesh, 2004

• Design of Floor Slab Systems (RC and PC) at AIT, Thailand, 2004

• Dynamic Analysis and Design of Structures at AIT, Thailand, 2003

• Modeling and Analysis of Offshore Structures atAIT, Thailand, 2003

• Customized Training for Engineers fromExpressway & Rapid Transit Authority of Thailandat AIT, Thailand, 2003

• Computer Aided Analysis and Design of ResidentialHouses at AIT, Thailand, 2003

• Analysis, Design, Monitoring and Strengthening ofBridge Structures at Karachi, Pakistan, 2003

• Finite Element Analysis of Structures at KualaLampur, Malaysia/AIT, Thailand, 2002

• Finite Element Method Using PROKON at SouthAfrica, 2002

• Analysis and Design of Bridge Structures atKathmandu, Nepal, 2002

• Modeling, Analysis, Design and Construction ofBridges at AIT, Thailand, 2001

• Computer Aided Analysis & Design of Structures at

Kathmandu, Nepal, 2000



13/22

M/SEAP

• Integrated Analysis and Design of Buildings in 3Dat Baguio, Philippines, 2001

• 3D Building systems at Baguio, Philippines/HochiMinh/ Hanoi, Vietnam, 2001

• Finite Element Analysis and Design of Structures

at AIT, Thailand, 2001• 3D Analysis & Design of Buildings at AIT, Thailand, 2001

• Modeling Analysis and Design of Segmental BoxGirder Bridges at AIT, Thailand, 2000

• Finite Element Modeling Analysis of Structures atAIT, Thailand, 2000

• Advanced Finite Element Analysis of Structures atAIT, Thailand, 1999

• Integrated Analysis and Design of ConcreteStructures at AIT, Thailand, 1999

• Analysis and Design of Bridge Structures at AIT, Thailand, 1999

• Pre-stressed & Reinforced Concrete Design at AIT, Thailand, 1997

• Computers for analysis & design of structures atDhaka, Bangladesh/Columbo, Srilanka, 1996

• Finite Element Analysis at AIT, Thailand, 1996

• 2D Analysis of Structures at AIT, Thailand, 1995

OS-CAAD

• Overview of Computer Aided Analysis and Designof Building at Khon Kaen, Thailand, 29 Jan 2005

• Analysis and Design of RC Structural Systems atManila, Philippines, 2004

• Analysis and Design for Wind, Earthquake, Fireand Vibrations at Columbo, Srilanka, 2004

• Practical Modeling and Analysis of Tall Buildings atDhaka, Bangladesh, 2004

• Modeling, Analysis, Design and Detailing of ShearWalls at AIT, Thailand, 2003

• Strut and Tie Model for Analysis and Design of RCMembers at AIT, Thailand, 2003

• Analysis and Design of Piers and Columns at AIT,

Thailand, 2003

• Strengthening and Retrofitting of ConcreteStructures at Dhaka, Bangladesh, 2003

• Design of Deep Beams, Brackets and Concrete Joints at AIT, Thailand, 2002

• Strengthening and Retrofitting of ConcreteStructures at AIT, Thailand, 2002

• Cost Sensitive Design of Flat Slab Floor Systems atAIT, Thailand, 2002

• Analysis and Design of Mat Foundations at AIT, Thailand, 2002

• Analysis and Design of Shear Walls at AIT,



14/22

Thailand, 2002

• Performance Based Design and Push Over Analysisat AIT, Thailand, 2002

S-CAAD

• Fully Automated Analysis and Design of RC

Frames at AIT, Thailand, 1999• 2 Dimensional Analysis of Structures Advanced

Modeling Techniques at AIT, Thailand, 1999

• Design of Pilecaps and Foundations at AIT, Thailand, 1999

• 3D Analysis of Building Structures at AIT, Thailand, 1999

• Design of Concrete Structures at AIT, Thailand,1998

• Design of Steel Stuctures at AIT, Thailand, 1998

• Graphical Analysis of 2D Structures at AIT,

Thailand, 1998

• Advanced Analysis and Design of General SlabSystems, Advance Analysis and Design of Flat SlabSystem at AIT, Thailand, 1998

• Analysis and Design of Flat Slab Structures at AIT, Thailand, 1998

• Advance Design of RC Beams and Pilecaps at AIT, Thailand, 1998

• Seismic Risk Assessments and Aseismic Design ofStructures at AIT, Thailand, 1998

• Computer Aided Analysis and Design of Concrete

Structures at Yangon, Myanmar, 1998• Advance Design of RC Column, Piers and Piles at

AIT, Thailand, 1997

• Graphical Analysis of Frames & Trusses Design ofConcrete Section at AIT, Thailand, 1997

Software Development

• Object Oriented Programming with Visual Basic atAIT, Thailand, 1999

• Beginning Programming with Visual Basic at AIT, Thailand, 1998

• Computer Programming for Engineering

Applications Using VB at AIT, Thailand, 1998W-CAAD

• Computer Aided Analysis and Design of Structuresfor Vibrating Loads at AIT, Thailand, 15-16 Feb2005



15/22

Professional Experience: Structural Analysis and Design

Summary Over twenty years of extensive experience in theconception, planning, analysis, design and detailing ofmultistory buildings, bridges, water retaining structures,industrial buildings and special structures. Worked on thestructural design of over 500 different projects.

Special Projects Planning, design and design review of many specialproblems including strength evaluation of existing

buildings and bridges, design of transmission towers,large diameter deep piles, cold formed structures etc.

• Development of Software for CPAC Roof System forCPAC, Thailand (Undergoing)

• Jetty Bridge Verification and Modification, PTTChemical Ltd. (Public), Thailand (Undergoing)

• Structural Review of Factory for Thai Cold Rolled SteelSheet (TCRSS), Thailand (Undergoing)

• Development of Software for the Automated Planningand Design of Block Houses for Nichada Thani Group

Thailand, 2006

• Structural Analysis, Design Review and Strengtheningof Preheater Tower of Siam City Cement Saraburi Plantfor Unity Engineering Consultants, Thailand, Nov 2006

• Investigation on Masonry Wall Problems atShinnawatra University, ACTEC Co., Ltd.,Thailand,Feb 2006.

• Evaluation and Remedial Measures for FloorSettlement Problem for Polyplex Public Co. Ltd.,

Thailand, Dec 2005.• Collapse Investigation of Mukdaharn Bridge, Mclarens

Young Co. Ltd. Thailand, 2005

• Investigation of Pile Damage at Kerry Siam Seaport atCunningham Lindsey Ltd., Thailand, 2005

• Design Review of 16-Story Apartment, ConcordArchitects & Engineers Ltd., Bangladesh, 2005

• Design Review of Preheater Tower No. 1, Cement KlinNo. 5 Foundation, Raw Mill Foundation and Coal MillFoundation at Siam City Cement, Thailand, 2004

• Design Review of Precast 5-Story Apartment, for SBC

Corporation Berhad, Malaysia, 2004.• Development of Web Portal Platform for CityNet and

Regional Institute of Environmental Technology, Japan,2003

• Evaluation and Remedial Measures for Slab andFoundation Problems for ECCO Tannery Co. Ltd., Thailand, 2003.

• Analysis and Remedial Measures of Wind Effects onSteel Tube Mast for Suvannabhumi Airport atBangkok, Thailand, 2003.

• Evaluation and Remedial Measures for Fire Damage atElectrowatt-Ekono Co. Ltd., Thailand, 2003

• Investigation into cracks developed in cooling towers of



16/22

one of the power plants operated by Bowin in Thailand,2002.

• Structural Evaluation of Lotus at Ladprao, Thailand,2003

• Research on Large Ferrocement Tanks, Thailand, 2002.

• Investigation into the failure of Pipe Rack at Rayong

• Investigation of design and behavior of Pile caps, for 55km long, 6 lane over elevated toll way, Bangkok,

Thailand

• Investigation into the failure of Roof Truss, Bangkok

• Investigation into the Failure of Inlet Pumping Station,Bangkok Wastewater Project, Thailand

• Investigation into Cracking of Beams in PolyesterFabric Project, Rayong, Thailand

• Investigation of Cracks in slabs in Betagro Head OfficeBuilding, Bangkok, Thailand

• Investigation of Collapse of Rice Silo at Prachinburi

• Investigation of Collapse at Suretex Surat Thani

• Design review of Generator Foundations for dynamicloads at Mabtaput, Thailand

Multistory Buildings Design of numerous concrete buildings, with a totalcovered area of 6.5 million sft (600,000 sqm). Majorprojects include;

• Trade Center, Lahore, 90,000 sft, flat slab

• High Court Building, Abbotabad, 12,000 sft

• Afghan Refugee Commissioner, Peshawar, 80,000 sft

• Ali Complex, Lahore, 130,000 sft, flat slab

• GDA Shopping Plaza, Gujranwala, 180,000 sft

• Hayatabad Medical Complex, Peshawar, 250,000 sft

• Ayub Medical Complex, Abbotabad, 150,000 sft,

• Cardiac Center, Lahore, 100,000 sft, waffle slab

• Rawalpindi Municipal Complex, Rawalpindi, 300,000sft

Bridges Planning, design and design review of numerous bridgesand highway structures.

• Conceptual and detailed design of two major bridges inBhutan for the Department of Roads. One with main

arch of 70m span. Total length 200m

• Conceptual design of 400m long box girder bridge inLagos, Nigeria

• Preliminary Cost Analysis and design of viaduct deckfor RAMA VIII Bridge Project (Bid Design)

• Preliminary Design of Cross-Frame and substructurefor Daokanong Expressway Project (Bid Design).

• Preliminary design of two flyovers for BVJV for BMAFlyover project in Bangkok

• Worked on the planning, design, and review of over 20canal bridges, 15 flyovers, 6 interchanges, 4 major

river bridges, 350 culverts and other related structuresin Pakistan Motorway, Lahore-Islamabad Section, with



17/22

DAEWOO Corporation of Korea

• Planning and design of 2 flyovers in Lahore, forHalcrow Fox Associates of United Kingdom. Posttensioned, segmental box girders

• Strength evaluation of Bridge at Tarraki, for NationalHighway Board, Pakistan

Water Retaining Structures Planning and design of several underground and elevatedtanks, and reservoirs.

• Murree Water Treatment Plant, 3 million gallons

• Several overheat tanks, up to 75,000 gallon capacity

• Water reservoirs, Muscat, 2 million gallon capacity

• Structural Design Review of Samut Prakan WastewaterManagement Project, Bangkok, Thailand

Industrial Buildings Planning and design of industrial buildings in concreteshells, steel trusses, steel frames, and special structuralsystems with a total area of nearly 3.5 million sft.

• WALLS Ice Cream Factory, for Unilever, Lahore, 10,000sft, 130 ft span steel trusses, cold sores etc.

• Hoechst-Ravi Plasticizers, Resins Complex,Sheikhupura, Pakistan

• L.T. Engineering, Industrial Complex, Wah, Pakistan,250,000 sft

• Hi Tech Feed Mills, Hatchery and Farms, 220,000 sft

• Islamabad Hatchery and Farms, 300,000 sft

• Big Bird Hatchery and Farms, 180,000 sft

• Rex-Barren Batteries, Lahore, 50,000 sft, hypar shells

•

Sunshine Paper Mills, Lahore, 40,000 sft, heavystructures

• Fastline Pencils Factory, Lahore, 35,000 sft

• Pepsi Cola Factory, Hattar, 50,000 sft, concrete shell



18/22

Software Development

Summary Nearly seventeen years of extensive experience indevelopment of software, use of computers inengineering application, training of professionals, andcomputer programming for general usage.

Basic Computer Skills Hands on experience of working with Personal, Micro,Mini and Main Frame computers.

• Programming ability in Visual C++, VisualBASIC,VisualBasic .Net, BASIC, FORTRAN, PASCAL and Clanguages

• Expertise in the use of software packages forstructural analysis and design such as SAP2000,ETABS, SAFE, STRAND, ROBOT, BATS, GEAR,MICROFEAPnho

• STRESS, SDL-1, AIT, etc.

• Extensive use of commercial programs like,

WINDOWS, DOS, ACCESS, MS Word, PowerPoint,dBASE, AutoCAD, MS Project, Excel, etc.

Software Development Over fifteen years of experience in the development ofcomputer programs for engineering applications.Author of several programs which have been releasedfor specific and general use. Main author of severaluser manuals and technical documentation. Planning,implementation, coordination and supervision ofsoftware projects carried out by several programmers.

Sole Author

• ACECOMS GEAR: This software comprises ofseveral modules for the assistance in the analysisand design of structures. Presently 24 modules havebeen released and are being used by engineers inover 20 countries, (released by ACECOMS, AIT).

• General Utilities - 5 Modules

• Unit Converter

• Engineering Constants

• Dead Load Reference

• Factored Loads

• Load Combinations

• Geometric Property Calculators - 4 Modules

• Triangle Solver

• Circle Solver

• Polygon Solver

• Property Calculator

• RC Utilities - 3 Modules

• Rebar Calculator

• K-Factor Calculator

• Moment Magnifier

• RC Member Designers - 4 Modules



19/22

• RC Beam Designer

• RC Column Designer

• Two-way Slab Designer

• Flat Slab Designer

• Foundation Analysis Assistant - 4 Modules

• Iso-Footing Designer

• Pilecap Designer

• Combined Footing Designer

• Retaining Wall

• Steel Member Designers - 3 Modules

• Footing Capacity

• Static Pile Capacity

• Driven Pile Capacity

• The SDL-1 Series consisting of six individual DOSbased programs for the structural analysis, designand detailing, released by TechnoSoft ComputerApplication in association with ACECOMS.

• TWSLAB: Analysis and Design of EdgeSupported Slabs

• FLATSLAB: Analysis and Design of Flat SlabSystems

• RCBEAM: Analysis and Design of RC Beams

• RCCOLUMN: Design of RC Columns for UniaxialLoads

• ISOFOOT: Design of Isolated Footings

• COMBFOOT: Analysis and Design of Combined

Footings

• SYS DESIGNER: A Series of programs developed forthe Design of Steel Members for Siam Yamato SteelCo. Ltd.

• Frame2DX: Program for the easy modeling andanalysis of structures in 2D, (released byACECOMS).

• BUILDCOST: A program for the building costestimation and preparation of BOQ, etc.

• BridgePad: Software for the design of BridgeBearings.

Co-Author

• BATS 99 and BATS 2000: A program for threedimensional analysis of buildings structures. Themain engine written by Prof. Worsak Kanok-Nukulchai, whereas Interface for Windows version

developed by the author.

• NichadaCAD: Software for automated design ofinterlocking block houses (Developed for Nichada Thani Group of Companies)

•

Monier CAD: Software for design of Roof System (Developed for CPAC, Thailand)



20/22

Others

• CSIDetailer: Software for design of concrete, steeland composite sections (released by Computers andStructures Inc., USA).

• CSISection Builder: Software for analysis anddesign of concrete, steel and composite sections(released by Computers and Structures Inc., USA).

• RISA Section: Software for analysis of generalcross-sections, (released by RISA Technologies,USA).

• CSICOL: Software for the design of slender andnon-slender concrete and composite columns

(released by Computers and Structures Inc., USA).



21/22

Professional Experience

Jan 2006 to Present

Affiliated Faculty

School of Engineering and Technology

Asian Inst i tute of Technology, Bangkok

Responsible for course coordinator forMasters level for Structural Engineering andacademic advisor for thesis work of theMasters and PhD students.

Dec. 1994 to Present

Associate Director/ General Manager

Asian Center for Engineering

Computations and Software

(ACECOMS)



Responsible for the preparation of theInception and Startup activities of the AsianCenter for Engineering Computations andSoftware at AIT. Involved in planning andmanagement of publicity, external contacts,publications, software development,research and Structural EngineeringProjects, ACECOMS Development,Management and operations. ContinueDoctoral study in Structural Engineering.

Jan 2007 to Present

Interim Director

Habitech Center



Jan 2007 to Present

Chair of Task Force on AIT Center

Pakistan

Asian Institute of Technology, Bangkok

Responsible establishing AIT Center atPakistan.

May 2007 to May 2009

Administrative Program Committee of the

Masters of Engineering in Civil Engineering

Faculty of Graduate Stidies

Mahidol University

Set the policy of program management,control standards of the programs to meetthe academic regulations of Graduatestudies and standards of the Ministry ofEducation, fulfill the program managementrequirements and give advice to develop theprogram, coordinate between related unitssuch as Faculty of graduate studies, Facultyof engineering and Department of civilengineering.

May 2007 to 2009

Scientific Committee, IABSE SymposiumBangkok, 2009

May 2005 to August 2006

General Secretary

The Tenth East Asia Pacif ic Conference

in Structural Engineering and

Construction (EASEC-10) held on 3-5

August 2006, Bangkok, Thai land

Responsible for the overall planning andmanagement, coordination, publication of

EASEC-10 conference.

April 1988 to Dec. 1994

Chief Executive/Principal

Naveed Anwar & Associates Lahore

Consult ing Engineers & Architects.

Fully responsible for the complete technicaland business management of the firm,including conception, detailed design,construction supervision and management

of engineering and architectural projects ofvarious nature and size. Responsible for the



22/22

development of software for engineeringapplications.

Work also involved public dealing,

coordination, business development,correspondence and personnelmanagement. Handling all contractualmatters with local clients, international

associates and multi-national organizations.

Sept. 1986 to April 1988

SEC, Asian Insti tute of TechnologyStudied in the Master program in theDivision of Structural Engineering andConstruction

Aug. 1984 to Sept. 1986

Senior Structural Engineer

Pakistan Environmental and

Architectural Consultants (PEPAC),

Lahore, Pakistan.

Responsible for the structural analysis,design and detailing of buildings, bridgesand other structures. Independentlycompleted many projects.

Jan. 1983 to Aug. 1984Structural Engineer

Progressive Consultants, Lahore.

Worked on the structural analysis, designand detailing of buildings, bridges and otherstructures. Part of a team for completingmany design projects.

Dec. 1980 - Dec. 1982

Student Apprentice Engineer

Architect 's Aff i l iat ion, Lahore

Worked as an assistant to the Seniorstructural engineers and architects.

naveed anwar cv

Documents