nc3_hm_eu_l09(1su)120831_eng
TRANSCRIPT
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
1/162
User Guide
This is a User Guide installed on the TV.
The contents of this guide are subject to change without prior notice for quaimprovement.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
2/162
Toviewprogrammeinformation
Wheel(OK)Info.
Displays information on current programme and / or current time, etc.
Image shown may differ from your TV.
Programme name or externaldevice name
Detail information on programm(for digital broadcast)
Current time
14:00 16:30
Sat, 1 Jan 12:02
P re v. /Ne xt P r. Ch an ge Sc he du le
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
3/162
To set favourite programmes
HOMESettingsSETUPProgramme Edit1 Move to the desired programme and pressWheel(OK)button. Progra
is selected.2 Press Set as Favourite.
3 Select the desired Favourite Pr. Group.
4 Select OK. Favourite is set.
To use Favourite
HOME Pr. List
Programme list will appear. Selects the desired preset favourite program
from Favourite List A to D.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
4/162
HOME Programme Guide
[In Digital Mode Only]
Obtains information about programmes and airing times. Obtains progr
formation and schedules viewing / recording.
Press Wheel(OK) button after m
programme of your choice to vierecord.
Makes schedule reservation by selecting date / programme. Makes repeat schedule reservation
[Image shown may differ from your TV.]
After viewing the schedule list, revisions or deletions.
-24H +24H Select scheduleby date S che du le L is t F avo uri te P r. G ro up
Today 10 Aug. 2011 7:00 1/2 page
FAV
Programme GuideALL
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
5/162
AutomaticallySettingUpProgramme
HOMESettingsSETUPAutoTuning
Automaticallytunestheprogrammes.
1 SelectCountrywheretheTVisused.Programmesettingschangeonthecountryyouchoose.
2 InitiateAutoTuning.3 SelectInputSourceofyourchoice.4 SetAutoTuningfollowingscreeninstructions.
IfInputSourceisnotconnectedproperly,programmeregistrationwork.
AutoTuningonlyfindsprogrammesthatarecurrentlybroadcastin
IfLockSystemisturnedon,apop-upwindowwillappearaskingf
password.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
6/162
CableDTVSettingoption
WhensearchingforprogrammesusingFULLsettingitcantakealong
Thefollowingvaluesareneededinordertosearchallavailableprogr
quicklyandcorrectly.ThecommonlyusedvaluesareprovidedasdeFrequency Enterauser-definedfrequency.
SymbolrateSpeedatwhichadevicesuchasmodemsendssaprogramme.
Modulation Loadingofaudioorvideosignalsontocarrier.
NetworkID Uniqueidentifierallocatedforeachuser.
StartFrequency Enterauser-definedstartfrequencyrange.
EndFrequency Enterauser-definedendfrequencyrange.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
7/162
SatelliteSettingOption
Satellite SelectyourdesiredSatellite.
LNBFrequency
Selectonevaluefrom9750/10600,9750/10750,
9750,10600,10750,5150.Ifyouselect9750/106009750/10750(MHz),22KHzToneisdisabled.IfyoufindtheLNBfrequencyvaluefromthelist,selectmanuallyenterthefrequency.
Transponder Selectthetransponderyouwanttotune.
22KHzTone Whenusing22KHzToneswitch,selectAorB.If22KHzTone,UnicableandMotorTypearedisabl
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
8/162
LNBPowerToenablethepowersupplyfortheLNB,selectOselectOff,MotorTypeisdisabled.
DiSEqCWhenusingDiSEqC,selectoneoptionfromA~D/IfyouuseDiSEqC,UnicableandMotorTypeare
UnicableSettingsSelectOntouseUnicableandsettheUnicableinUnicableSettingmenu.WhenUnicableisenableTone,DiSEqC,MotorTypearedisabled.
MotorType
SelectMotorTypetouseMotorandsettheMoto
MotorSettingmenu.WhenMotorisenabled, 22KDiSEqC,Unicablearedisabled.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
9/162
Ifyousetsatellitetoothers,youmustaddatransponderusingMTuning.
Whenselecting22KHzToneandDiSEqc,youmustconnectthemipositionasdisplayedontheOSD.
IfyoudeleteaSatellite,allprogrammesstoredintheSatelliteare
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
10/162
MotorSettingOption
DiSEqC1.2:Controlmotortochangesatellitedishposition.
DriveDirection Selectthedirectioninwhichyouwanttomovet
DriveMode
Twomodesareavailable:StepandContinuous. Step:Themotormovesbasedonthevaluey(from1to128).
Continuous:ThemotormovescontinuouslypresstheStop.
TestTP SelectthetestTPyouwanttotune.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
11/162
SetLimit
Setthemotormovementtoeastorwesttohavemoveonlywithinthedirectionset.
On:YoucanlimitthemovementtothecurredirectionbyselectingtheWest/East.
Off:Youcancancelthelimityouset.GoToZero YoucanmovethemotortoZero.
Store Youcansavethemotorscurrentdirection.
USALS:Setyourcurrentlocation(Longitude/Latitude).
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
12/162
CableDTVSetting
HOMESettingsSETUPCableDTVSetting
[InCable,Cable&Satellitemodeonly]
ServiceOperatorSetServiceOperator.WhenchangingServiceOperator,theexistingsavprogrammesaredeletedandAutoTuningruns.
ChannelAutoUpdate
On:Youcanupdateinformationforallthepro
thatcanbeupdated,includingtheprogrammebeingwatched.
Off:Youcanonlyupdateinformationforthepcurrentlybeingwatched.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
13/162
TherangethatausercanselectfromtheServiceOperatormenudependingonnumberofServiceOperatorsupportedbyeachcoun
IfnumberofsupportedServiceOperatorforeachcountryis1,corfunctionbecomesinactive.
YoucannotselecttheCableDTVSettingwhentheserviceoperatZiggo.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
14/162
SatelliteSetting
HOMESettingsSETUPSatelliteSetting
[InSatellite,Antenna&Satellite,Cable&Satellitemodeonly]
Youcanadd/delete/setthesatelliteyouwant.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
15/162
TivuProgrammeListUpdate
HOMESettingsSETUPTivuProgrammeListUpdate
[OnlyItaly]
[InSatellite,Antenna&Satellite,Cable&Satellitemodeonly]
ItupdatesthechangedProgrammeListinformationbybasedoncounbroadcastingcircumstanceandsatellite.
ItupdatestheProgrammeListwhentheTVturnoffallthetime.After
theProgrammeListmaybechanged.Ifnotwant,selectOff.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
16/162
ProgrammeListUpdate
SETTINGSSETUPProgrammeListUpdate
[InSatellite,Antenna&Satellite,Cable&Satellitemodeonly]
ItupdatesthechangedProgrammeListinformationbybasedoncounbroadcastingcircumstanceandsatellite.
ItupdatestheProgrammeListwhentheTVturnoffallthetime.AftertheProgrammeListmaybechanged.Ifnotwant,selectOff.
ForAustria,Germany,PolandandRussia,thisfunctionissupportServiceOperatorisnotsettoNone.
R i l P
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
17/162
RegionalProgramme
HOMESettingsSETUPRegionalProgramme
[OnlyAustria]
Setregionbroadcastingandwatchregionbroadcastingataspecifict
TosetServiceOperatorofSatellite,ORSmustbeselected.
T M l T i
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
18/162
TouseManualTuning
HOMESettingsSETUPManualTuning
Adjustsprogrammesmanuallyandsavestheresults.
Fordigitalbroadcasting,signalstrengthandsignalqualitycanbeche
T dit
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
19/162
Toeditprogrammes
HOMESettingsSETUPProgrammeEdit
Editsthesavedprogrammes.
Setasfavouriteprogramme,block/unblockprogramme,skipprogramtheselectedprogramme.
( ) ( )
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
20/162
Wheel(OK) (Screen Remote Control)
(or press the TEXT button.)
[depending on the country]
Teletext is a free service provided by the TV station that offers text-ba
information about TV programmes, news and weather.
The teletext decoder of this TV can support the SIMPLE, TOP and FAS
systems.
Colour button To select the preceding or following page.
Number button Enters the page number to move to.
To select the preceding or following page.
S i l T l t t F ti
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
21/162
Special Teletext Function
Wheel(OK) (Screen Remote Control)
(or press the T. OPT button.)
Select the Text Option menu.
Index Select each index page.
TimeWhen viewing a TV programme, select this menu to disp
time at the top right hand corner of the screen.
HoldStops the automatic page change which will occur if a t
page consists of 2 or more sub pages.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
22/162
RevealSelect this menu to display concealed information, such
solutions to riddles or puzzles.
UpdateDisplays the TV picture on the screen while waiting for a
teletext page.
Language[In Digital Mode Only]
Sets Teletext language.
Wh l(OK) (S R t C t l)
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
23/162
Wheel(OK) (Screen Remote Control)
(or press the TEXT button.)
[In UK/Ireland only]
The TV gives you access to digital teletext which gives much better te
graphics etc. than older analogue teletext. This digital teletext can acc
special digital teletext services and specific services which broadcast
teletext.
Teletext within digital service
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
24/162
Teletext within digital service
1 Press the numeric or button to select a certain service which brdigital teletext.
2 Follow the indications on digital teletext and move onto the next ste
pressing Wheel(OK), TEXT, Navigation, Red, Green, Yellow, Blue or buttons etc..
3 Press the number or button to use a different digital teletext ser
Teletext in digital service
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
25/162
Teletext in digital service
1 Press the numeric or button to select a certain service which brdigital teletext.
2 Press the TEXT or colour button to switch on teletext.
3 Follow the indications on digital teletext and move onto the next stepressing Wheel(OK), Navigation, Red, Green, Yellow, Blue or NUMB
etc..
4 Press the TEXT or colour button to switch off digital teletext and ret
viewing.
To Set MHP Auto Start
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
26/162
To Set MHP Auto Start
HOME Settings OPTIONMHP Auto start
[Depending on model] [In Italy only]
This function Auto Starts the MHP function, Italian data broadcast. Use programme with MHP signal. Data broadcast function may not be smoot
situation from the broadcasting station.
What is HbbTV?
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
27/162
WhatisHbbTV?
[Depending on model] [Depending on Country]
The HbbTV or Hybrid Broadcast Broadband TV replaces existing analo
teletext services with a new-generation, web-based interactive broadcservice. Similar to digital text and EPG, HbbTV can be used to provide
of services in addition to standard broadcast content.
The functionality and quality of the HbbTV service may vary dependin
broadcast service provider.
This function may not be available in some countries.
In France, the HbbTV service is available via terrestrial broadcasting.
In Germany, it is available via terrestrial, cable and satellite broadcasti
For more information about HbbTV, visit www.hbbtv.org.
To use HbbTV
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
28/162
TouseHbbTV
HOMESettingsOPTIONHbbTV
Sets HbbTV to On. Enjoy a variety of content on the HbbTV service.
The service may be limited when the device is not connected to the
If HbbTV is set to On, the pattern gesture function of the Magic RemControl does not work.
HOME Settings OPTION Data Service
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
29/162
HOME Settings OPTION Data Service
[Depending on country]
This function allows users to choose between MHEG (Digital Teletext) an
if both exist at the same time.
If only one of them exists, either MHEG or Teletext is enabled regardless
which option you selected.
HOME Settings SETUP CI Information
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
30/162
HOME Settings SETUP CI Information
Thisfunctionenablesyoutowatchsomeencryptedservices(pay
services).
IfyouremovetheCIModule,youcannotwatchpayservices.
CI(CommonInterface)functionsmaynotbepossibledependingupocountrybroadcastingcircumstances.
WhenthemoduleisinsertedintotheCIslot,youcanaccessthemo
menu.
Topurchaseamoduleandsmartcard,contactyourdealer.
WhentheTVisturnedonafterinsertingaCIModule,youmaynotha
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
31/162
g , y y
soundoutput.TheSmartCardmaynotbecompatiblewiththeCImo
WhenusingaCAM(ConditionalAccessModule),pleasemakesurei
meetsfullytherequirementsofeitherDVB-CIorCIplus.
AnabnormalprocessofCAM(ConditionalAccessModule)maycauspicture.
HOME Settings PICTURE Aspect Ratio
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
32/162
HOME Settings PICTURE Aspect RatioSelects the screen aspect ratio.
16:9 Resizes images to fit the screen width.
Just ScanDisplays video images in the original size without remoof the edge of the image.
In DTV/HDMI/Component (over 720p) mode, Just Savailable.
OriginalWhen your TV receives a wide screen signal it will auto
change to the picture format broadcasted.
When TV receives the wide screen signal it will let you
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
33/162
Full Wide
When TV receives the wide screen signal, it will let you
the picture horizontally or vertically, in a linear proport
the entire screen fully.
4:3 and 14:9 video is supported in full screen without a
distortion through DTV input. In Analog/DTV/AV/Scart mode, Full Wide is availab
4:3 Resizes images to the previous standard 4:3.
14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is viewed
same way as in 4:3, but is moved up or down.
ZoomResizes the image to fit the screen width. The top and
parts of the image may be cut off.
Cinema
Zoom
Choose Cinema Zoom when you want to enlarge the pi
correct proportion.
While viewing an external device, these cases may result in image
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
34/162
- a video with stationary caption (such as network name)
- 4 : 3 aspect ratio mode for an extended period
Take caution when using these functions.
Available picture size may differ depending on the input signal.
The screen aspect ratios on HDMI/RGB-PC input are available in 4:only.
[For models supporting 2160p] When a 2160p signal is input or you
resolution is set to 3840 x 2160, the Aspect Ratio is fixed to Just Sca
ToadjustpictureinPCinputmode
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
35/162
j p p
HOMESettingsPICTUREScreen
Adjusts picture in RGB-PC mode.
ResolutionSets the desired resolution.
Resolution may only be selected when the PC resoset to 1024 x 768, 1280 x 768 or 1360 x 768.
Auto
Configuration
Optimizes picture.
Position / Size
/ Phase
If screen size or location is distorted, user can directly
the screen size and position.
Reset Resets all changes on picture settings on PC input mo
TosetPCresolution
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
36/162
1 Right-click on the desktop of your PC and select Properties.
2 Click on Settings and refer to supported formats to set the resolut
3 Select Advanced Monitor Monitor Settings on the setting w
Refer to supported formats to select the optimal vertical frequency.
On PC mode, 1920x1080 resolution delivers the optimum picture qu
Resolution settings differ depending on the type of PC.
FormatsSupported
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
37/162
PC Input Mode ResolutionHorizontal
Frequency (KHz)
Ve
Freque
HDMI-PC /RGB-PC
640x350 31.468 7720x400 31.469 7
640x480 31.469 5
800x600 37.879 6
1024x768 48.363 6
1152x864 54.348 60
1360x768 47.712 60
1920x1080 67.5 6
HDMI-PC 1280x1024 63.981 60
HOMEQuick Menu AV Mode
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
38/162
Sets the best picture / audio optimized for different AV modes.
Off Operates with the value set in the picture / sound men
Cinema / Cinema
Optimizes picture and audio settings for movies.
Game Optimizes picture and audio settings for games.
[Depending on model]
THX (Thomlinson Holmans Experiment) is an audio and video certistandard established by George Lucas and Thomlinson. A THX certdisplay guarantees screen quality that exceeds the display standarspecification in both hardware and software.
ToadjustpictureswithPictureWizard
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
39/162
HOMESettingsPICTUREPictureWizardUse the remote control and follow the instructions of the Picture Wizar
calibrate and adjust for optimum picture quality without expensive patdevices or help from a specialist.
Follow the instructions to obtain the optimum picture quality.
ToselectPictureMode
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
40/162
HOMESettingsPICTUREPictureModeSelects the picture mode optimized for the viewing environment or the
programme.
Intelligent Sensor
Detects the ambient illumination and automatadjusts the TV's brightness level to reduce poconsumption. Automatically adjusts brightnessharpness, colour or tint for optimum picture
Vivid Heightens contrast, brightness and sharpnessdisplay vivid images.
StandardDisplays images in standard levels of contrastbrightness and sharpness.
Cinema/ Cinema Displays images that have been optimized for
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
41/162
Game
p y g p
or games. [ Cinema : Depending on mode
Expert
Menu for adjusting picture quality that allowsand amateurs to enjoy the best TV viewing. T
is ISF-certified and provided for picture tuning(ISF logo can only be used on ISF-certified TVISFccc : Imaging Science Foundation CertifiedCalibration Control
Depending on the input signal, the available range of picture modesdiffer.
Expert mode is for picture tuning professionals to control and fusing a specific image. For normal images, the effects may not be d
Tofine-tunepicturemode
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
42/162
HOMESettingsPICTUREPictureModeBacklight//Brightness/Sharpness/Colour/Tint/ColourTemp.
First select a Picture Mode of your choice.
BacklightAdjusts the display brightness by varying the brightnthe LCD panel.
ContrastAdjusts the difference between bright and dark regioscreen.
Brightness Adjusts the overall screen brightness.
SharpnessAdjusts the sharpness of the borders between brightdark.
Colour Adjusts the colours on the screen darker or lighter.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
43/162
Tint Adjusts the red/green colour balance.
Colour Temp. Adjusts the overall tone of colours to warm or cool.
Depending on the input signal or other picture settings, the range oitems for adjustment may differ.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
44/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
45/162
Colour FilterFilters a specific colour spectrum in RGB colours t
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
46/162
Colour Filtertune colour saturation and hue accurately.
Expert Pattern Patterns used for expert adjustment.
White Balance
Adjusts the overall tone of the screen as desired.
In Expert mode, detailed fine-tuning can be set via
Method / Pattern etc.
Colour
ManagementSystem
This is a function used by experts when they adju
using a test pattern of six colours (Red / Green / B
Cyan / Magenta / Yellow) without affecting other areas. For normal images, adjustments may not re
noticeable colour changes.
Depending on input signal or other picture settings, the range of de
items for adjustment may differ.
Tosetadditionalpictureoptions
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
47/162
HOMESettingsPICTUREPictureModePictureOpti
Adjusts detailed setting for images.
Noise Reduction Reduces screen noise in the video.
MPEG NoiseReduction
Reduces noise caused by compressing digital vide
Black Level
Adjusts the brightness or darkness of the screen t
black level of the picture input using the degree of(black level) of the screen.
Real Cinema Optimizes the screen for movie viewing.
Eye Care/Motion Eye Care
Adjusts screen brightness to prevent eye glare.
[Motion Eye Care : Depending on model]
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
48/162
HOME Settings PICTURE Picture Mode Picture Opt
TruMotion
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
49/162
TruMotion
Corrects images to display smoother motion sequences.
Smooth De-Judder value is set to 3.
Clear De-Judder value is set to 7.
UserDe-Judder can be set manually.
De-Judder : This function adjusts juddering of the s
If the video signal is 60Hz, TruMotion may not work.
HOME Settings PICTURE Picture Mode Picture Option
LED Local Dimming
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
50/162
LED Local Dimming
Brightens bright areas and darkens dark areas of the image for maximum
contrast and minimum blur while reducing power consumption.
O Turns o LED Local Dimming.
LowExpresses natural black tones. Uses this setting for viewin
movies.
Medium
Deepens black tones compared to Low. Uses this setting f
regular TV viewing.
HighDeepens black tones and delivers clearer image than Med
Perfect for viewing in brightly lit areas.
Setting LED LocalDimming to Medium / High reduces power consum
TouseSoundMode
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
51/162
HOMESettingsSOUNDSoundModeOptimizes TV audio to the selected sound mode.
Standard Suitable for all types of video
Music / Cinema /
Sport / GameSets audio optimized for a specic genre.
VividDelivers distinct voices with rich bass and clear
high-pitched sounds.
User SettingAdjusts the volume to a level of your choice usi
User EQ.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
52/162
To set Volume Mode
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
53/162
HOME Settings SOUND Volume Mode
Sets various modes for volume control.
Auto Volume
Sets Auto Volume to On. Different volume outputs fprogramme to programme. They are then automaticadjusted for convenient TV watching, when clickingdifferent programme.
Volume Control
Using a single volume curve may result in an inaudi
loud sound depending on the environment. Adjustslevels depending on the time of day (day/night).
To use Sound Optimizer function
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
54/162
HOME Settings SOUND Sound Optimizer
Allows optimized sound for custom TV installation.
Normal General sound mode.Wall Mount Type Optimizes sound for a wall-mounted TV.
Stand Type Optimizes sound for a stand-mounted TV.
To use Virtual Surround sound
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
55/162
HOME Settings SOUND Virtual Surround
LGs proprietary audio processing technology allows 5.1ch-like surrounfrom two speakers.
If Clear Voice ll is set to ON, Virtual Surround will not be chosen.
To use Clear Voice ll function
HOME Settings SOUND Clear Voice llBoosts voice clarity.
To synchronize audio and video
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
56/162
HOME Settings SOUND AV Sync.
Synchronizes video and audio directly when they do not match.
If you set AV Sync. to ON, you can adjust the sound output (TV speakeSPDIF) to the screen image.
TV Speaker
Adjusts the synchronization of the sound from the TVspeakers.The "-" button makes the sound output faster and the
button slower than the default value.
SPDIF
(Sony Philips Digital InterFace) Adjusts the synchroniof the sound from speakers connected to digital audioconnectors.The "-" button makes the sound output faster and the
button slower than the default value.
BypassOutputs broadcasting signals or the audio of an exterdevice without audio delay Audio may be output bef
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
57/162
Bypass device without audio delay. Audio may be output befas it takes time to process video input into the TV.
To use ARC mode
HOME Settings SOUND Sound Setting ARC Mode
External audio devices can be connected via High-Speed HDMI cable
an extra optical audio cable to output SPDIF. It interfaces with SIMPLINFor an external device that supports ARC (Audio Return Channel), conthe HDMI(ARC) port.
OffEven when the connected ARC-supported external audio devicturned on audio output is not automatically processed through
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
58/162
Off turned on, audio output is not automatically processed throughexternal audio device's speakers.
On
If ARC-supported external audio device is turned on, audio out
automatically processed through the external audio device speFor SIMPLINK, refer to General To control external devices
Connect to ARC-only terminal when connecting to external devices
Use high-speed HDMI cable when connecting to external devices
Use of a third-party device with an ARC function may cause malfun
To adjust audio balance
HOME S i SOUND S d S i B l
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
59/162
HOME Settings SOUND Sound Setting Balance
Adjusts left/right audio balance.
To use TVs speakers
HOME S i SOUND S d S i TV S k
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
60/162
HOME Settings SOUND Sound Setting TV Speaker
When listening via speakers on external audio devices connected to thas home theatre equipment, the TV speaker may be turned off. If theretheatre device connected to SIMPLINK, setting the TV Speaker to Off wthe home theatre equipment on automatically.
Off
TV speakers do not play sound.Plays the TV sound through external audio device speakers con
to the TV. Adjusts the volume via the knob attached to the external de
On Plays the TV sound through the TV's internal speaker.
To use Digital Sound Out
HOME S tti SOUND S d S tti Di it l S d
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
61/162
HOMESettingsSOUND Sound Setting Digital Sound
Sets up Digital Sound Output.
Item Sound Input Digital Sound output
Auto
MPEG PCM
Dolby Digital Dolby Digital
Dolby Digital Plus Dolby Digital
HE-AAC Dolby Digital
PCM All PCM
DTV Sound Setting
HOME S tti SOUND DTV S d S tti
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
62/162
HOME Settings SOUND DTV Sound Setting
[Depending on model]
When different audio types exist in an input signal, this function allowsselect the audio type you want.
If set to AUTO the search order is HE-AAC Dolby Digital+ Dolby DMPEG and output is produced in the first Audio Format found.
In Italy only, the order is HE-AAC Dolby Digital+ MPEG Do
In New Zealand only, the order is Dolby Digital+ Dolby Digital MPEG.
If the selected Audio Format is not supported, another Audio Formaused for output.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
63/162
TouseSIMPLINK
SIMPLINK is a feature that enables you to control and manage various
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
64/162
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently using the TV remote control only via
SIMPLINK menu.
1 Connect the TV's HDMI IN terminal with the SIMPLINK device's HDMterminal using an HDMI cable. For home theatre units with a SIMPLfunction, connect HDMI terminals as above, and use an optical cablconnect Optical Digital Audio Out from the TV to Optical Digital AudSIMPLINK device.
2 Select HOME SIMPLINK. SIMPLINK menu window appears.3 Select Set SIMPLINK on SIMPLINK menu window. SIMPLINK setup w
appears.
4 Set SIMPLINK to On in SIMPLINK setup window.
5 Close SIMPLINK setup window.
6 Select the device to control from HOME SIMPLINK.
This function only works on devices with the SIMPLINK logo ( Verify that the external device has a SIMPLINK logo.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
65/162
To use the SIMPLINK function, you need to use a high-speed HDMI(with CEC, or Consumer Electronics Control, feature added). High-s
HDMI
cables have the No. 13 pin connected for information exchabetween devices.
Turn on or select the media of a device with home theatre featuresspeaker switch to HT Speaker.
Connect with an Optical cable (sold separately) to use HT Speaker.
Switching to external input causes devices operating with SIMPLIN
Use of a third-party device with HDMI-CEC features may cause ma
ExplanationofSIMPLINKfeatures
Direct Play Plays the multimedia device on the TV instantly
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
66/162
Direct Play Plays the multimedia device on the TV instantly.
Selectmultimedia
device
Selects the desired device via the SIMPLINK menu
control it from the TV screen instantly.Disc playback Manages the multimedia device with the TV remo
Power off alldevices
If the Auto Power function is set to On in the SIMP
settings, turning the TV off will turn the power off
SIMPLINK-connected devices.
Sync Power onIf the Auto Power function is set to On in the SIMP
settings, turning on a SIMPLINK device will turn th
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
67/162
Speaker Selects speaker either on the home theatre unit or
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
68/162
To use Sleep Timer
HOME Settings TIME Sleep Timer
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
69/162
HOME Settings TIME Sleep Timer
Turns o the TV after a preset number of minutes.
To cancel the Sleep Timer, select O.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
70/162
To set the TV to turn on and of automatically
HOME Settings TIME On Time/Of Time
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
71/162
HOME Settings TIME On Time/Of Time
Sets On/O time.
Select O on Repeat to discontinue On Time/O Time. To use On Time/O Time, set the current time correctly.
Even when the On Time function is on, the TV will turn o automatica120 minutes when no button is pressed within that time.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
72/162
To set password
HOME Settings LOCK Set Password
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
73/162
HOME Settings LOCK Set Password
Sets or changes TV password.
The initial password is set as 0000.When France is selected for Country, password is not 0000 but 12When France is selected for Country, password cannot be set as 00
To lock system
HOME Settings LOCK Lock System
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
74/162
g y
Permits only specic programmes by blocking channels or external input
Select the Lock System to On.
Block
Programme
Blocks the programmes that contain inappropriate conte
children. The programmes can be selected but the scre
blank and the audio is muted.
To watch a locked programme, enter the password.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
75/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
76/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
77/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
78/162
HOME Settings OPTION Disability Assistance
Audio commentary or subtitles are provided for those who are hard of h
or visually impaired
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
79/162
or visually impaired.
Hard of HearingThis function is used for the hearing impaired.
If it is set to on, the subtitle is displayed by default.
Audio
Description
This function is for the blind, and provides explanato
audio describing the current situation in a TV progra
in addition to the basic audio.
When Audio Description is selected On, basic audio
Audio Description are provided only for those progra
that have Audio Description included.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
80/162
To re-register the Magic Remote Control1 Press the HOME and BACK buttons together for about 5 seconds.
2 Point the remote control at the TV and press Wheel(OK) button for a
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
81/162
2 Point the remote control at the TV and press Wheel(OK) button for a
seconds.
Press the BACK button while pointing the remote control at the TV seconds to reset and re-register it.
To set the pointer of the Magic Remote Control
HOME Settings OPTION Pointer
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
82/162
Sets the speed and shape of the pointer that appears on the TV screen
Speed Sets the moving speed of the pointer.Shape Selects a pointer shape from various options.
Size Chooses the size of the pointer.
Alignment
Set to On. If there is any misalignment between the point
and the actual direction the remote control indicates, moMagic Remote Control left and right to realign. The pointeautomatically realign to the centre, making it easier to co
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
83/162
Electronic devices nearby may cause communication interference. such as microwave ovens and wireless LANs use the same frequen(2.4 GHz) as the Magic Remote Control and may cause interference
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
84/162
The Magic Remote Control may be broken if dropped or damaged inway.
Take care not to bang it against other hard objects such as furniturfloor.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
85/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
86/162
ToreturntoinitialsettingsHOMESettingsOPTIONFactoryReset
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
87/162
Deletes all optional settings and returns to initial default mode.
Once initialization is complete, the TV will turn off and on by itself.
If Lock System is activated, a pop-up password prompt will appear.
Do not turn off the power during initialization.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
88/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
89/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
90/162
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
91/162
Settinganetwork-warning Use a standard LAN cable (Cat5 or higher with RJ45 connector, 10 100 Base TX LAN port)
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
92/162
100 Base TX LAN port).
Resetting your modem can cause network connection problems. To
the problem, turn the power off, disconnect and reconnect, and thepower back on.
LG Electronics is not responsible for any network connection problefaults, malfunctions and errors caused by an network connection.
A network connection may not work properly depending on the Inte
service provider.
A DSL modem is required for a DSL service; a cable modem is requfor a cable service. Only a limited number of network connections mavailable, and TV network setting may not be available depending ocontract with your Internet Service Provider (ISP) (If only one devic
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
93/162
contract with your Internet Service Provider (ISP). (If only one devicallowed per line and the PC is already connected, other devices canused.)
Wireless networks can be subject to interference from other deviceoperating at a frequency of 2.4 GHz (wireless phones, Bluetooth devor microwave ovens). There may also be interference from devices frequency of 5 GHz, same as other Wi-Fi devices.
The surrounding wireless environment can cause the wireless netwservice to run slowly.
If you do not turn off the entire local home network, network trafficoccur on some devices.
For an AP connection, an access point device that supports wirelesconnection is required and the wireless connection feature must beon the device. Contact your service provider regarding availability oconnection on your access point.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
94/162
connection on your access point.
Check the SSID and security settings of the AP for AP connection.
the appropriate documentation for SSID and security settings of the Invalid settings on network devices (wired/wireless line sharer, hubcause the TV to run slowly or not operate properly. Install the deviccorrectly according to the appropriate manual and set the network.
An ad-hoc connection may not work depending on the connected d
laptop).
Connection method may differ according to the AP manufacturer.
To use Smart ShareHOME Smart Share
P id h t / i / id fil TV b ti t USB
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
95/162
Provides photo / music / video files on your TV by connecting to a USB
home network (DLNA, Media Link).
Displays photo / mvideo files on all d
connected to the
SMART SHARE
ContentsType
More....
LinkedDevice
More....RecentlyWatched
More....NewlyAdded
More....
Settings Connecting Guide
VIDEO
ALL
MUSIC
PHOTO
RECORDEDTV
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
96/162
To control photo viewControls playback and sets options while viewing pictures in full screen
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
97/162
Sets options.
Stops playback and retto the list.
Displays photos as aslideshow.
Plays background music.
Rotates or enlargesthe picture.
Option ListSlideshow BGM
To control music playbackControls playback and sets options while playing music.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
98/162
Option List
Selects the desiredplays
Sets options
Returns to the list
Plays
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
99/162
Auto Play onReceipt
Accepts / rejects content transferred from other de
Registers or releases DivX.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
100/162
DivX VOD
Checks DivX Registration Code for playing DivX-pro
videos. Register at http://vod.divx.com.
Uses Registration Code to rent or purchase movies
divx.com/vod.
Rented/purchased DivX files cannot be played ifRegistration Code of a different device is used. Uthe DivX Registration Code granted to this devic
Converted files not conforming to the DivX CodeStandard may not play or may produce abnormaand sound.
HistoryTo delete contents history, press button below. Use the contents at Co
Type and Linked device menu.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
101/162
Privacy
Check the device that you do not want to open at Newly Added and Re
Watched menu.
Smart Share supporting fileMaximum data transfer rate :
20 Mbps (megabits per second)
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
102/162
External subtitle formats supported :
*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0),*.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX)
Internal subtitle formats supported :
XSUB (supports internal subtitles generated from DivX6)
Video Supported CodecMaximum: 1920 x 1080 @30p
Extension Codec
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
103/162
.asf
.wmv
Video VC-1 Advanced Profile, VC-1 Simple and Main Pro
Audio WMA Standard, WMA 9 Professional
.divx
.avi
VideoDivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC,
Motion Jpeg
AudioMPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, LPCM, ADPCM, D
.mp4
.m4v
.mov
Video H.264/AVC, MPEG-4 Part 2
Audio AAC
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
104/162
Available music fileFile type Item Info
Bit rate 32 Kbps - 320 Kbps
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
105/162
mp3 Sample freq. 16 kHz - 48 kHz
Support MPEG1, MPEG2, Layer2, Layer3
Available photo fileFile type Item Profile
AvailableSOF0: baselineSOF1: Extend Sequential
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
106/162
2D(jpeg, jpg,jpe)
file typeSOF1: Extend SequentialSOF2: Progressive
Photo size
Minimum: 64 x 64Maximum:Normal Type: 15360 (W) x 8640 (H)Progressive Type: 1920 (W) x 1440 (H)
Playing video - warning Some subtitles created by users may not work properly.
The video and subtitle files should be placed in the same folder. Fo
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
107/162
pto display correctly, the video and subtitle files must have the same
We do not support any stream that contains GMC (Global MotionCompensation) or Qpel (Quarterpel Motion Estimation).
Only H.264 / AVC profile level 4.1 and lower is supported.
The file size limit is dependent on the encoding environment.
Video files created by some encoders may not be played back. Video files in formats other than the ones specified here may not beback.
Playback of video files stored on the USB device that do not suppor
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
108/162
Playback of video files stored on the USB device that do not supporSpeed, may not work properly.
The TV supports DTS audio codec when the USB video file playbac
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
109/162
TousepaidcontentA fee is payable for some Premium content. Fee-paying services are paid f
through LG Electronics' proprietary billing system or through that of the rel
content provider Prior to using the LG billing system you will need to sign
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
110/162
content provider. Prior to using the LG billing system, you will need to sign
membership and register payment information on www.lgappstv.com.
1 Click Sign In button on the upper-right side of the screen on the Home pin.
2 Moves to the desired Premium service.
3 After reviewing the pricing and service information for the content, click
Purchase button. (Some content is subject to certain restrictions in term
limit or number of views.)
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
111/162
Content offered by service providers are subject to change or deletwithout prior notice to enhance their service quality. Refer to the wof the relevant content provider for questions, troubleshooting or thinformation about content. LG Electronics assumes no legal responcontent services and related information even when a service is di
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
112/162
content services and related information, even when a service is diby the service provider.
The quality of your Premium service may be affected by your Internconnection. For any questions related to Internet speed or other seproblems, consult your Internet service provider.
For best service quality, we recommend that you subscribe to an In
service providing a speed of 4.0 Mbps (1.5 Mbps or faster). If you eany Internet speed problem, contact your Internet service provider.
Some content providers may provide content that is unsuitable for Parental discretion is advised.
HOME Internet
Types URL manually on TV or visits websites added to Favourite.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
113/162
Chooses when youopen several web
browsers.
Moves to athat you ha
Types in the web address. Add the current page to favo
Internet supports up to Flash 10 but does not support platform-deptechnology like ActiveX.
Internet only works with a pre-installed plug-in.
Internet may not play any media file format other than the following
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
114/162
y p y y gJPEG / PNG / GIF / WMV (ASF) / WMA / MP3 / MP4
Internet will be forcibly closed when there is insufficient memory.
For the Internet, fonts installed on the TV are used and may not be normally depending on the content played.
Internet does not support file and font download.
Internet is made for TV so it may have a different function to browsfor PC.
Internet is a TV browser and may not work properly when playing scontent files.
HOME Social Center
The LG Smart TV Social Center app enables you to enjoy SNS services
Facebook or Twitter while watching TV.
With Social Center app you can communicate with friends and view m
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
115/162
With Social Center app, you can communicate with friends and view m
and photos posted by your SNS contacts all at once.
1 Sign in to your LG TV account or if not a member, sign up first.
2 Sign in to the desired service (Facebook or Twitter) or
if not a member, create an account first.
3 Check SNS services and post messages while watching TV.
Posts made to Facebook or Twitter from Social Center app will also
web page or mobile web.
SOCIAL CENTER
Toggles Facebook/Twitter.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
116/162
Refresh
If there is no Social Center appon the My Apps, install one from LGWorld.
Log on to the SNS services on your smartphone using the LG Magicapp for greater convenience when typing in text messages. The apavailable in the Google Play Store or the Apple App Store
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
117/162
available in the Google Play Store or the Apple App Store.
Sign-up is required to use LG Smart World.
Membership to use free apps: Sign up at TV or PC.
Membership to purchase paid apps: Sign up only at PC.
Problem Solution
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
118/162
Problem Solution
When entering menu,the "Initializing" messagealways appears.
The Initializing message appears while themicroprocessor and hardware are rebooted, netw
communications are set up, and communication
(device authentication and basic information dow
established. This takes about 20 seconds and is
process.
There is no content shownon the Premium card.
Content may not be shown if you change the co
setting on Smart TV. Change country in HOME
OPTIONSmart TV SettingSmart TV Co
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
119/162
Problem Solution
Can each family memberuse a different ID on a
You can register and use more than one ID on on
You can view the IDs registered on the TV in HO
SettingsOPTIONSmart TV SettingID Li
Y h k h li f h d b
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
120/162
use a different ID on asingle TV?
You can check the list of apps purchased by eac
However, you can see all apps installed by eachApps.
What should I do if I forgetmy ID?
If you signed up via a PC, use the "Forgot ID?" fe
the website (www.lgappstv.com).
If you signed up on the TV, IDs can be viewed in
SettingsOPTIONSmart TV SettingID Li
Problem SolutionI purchased an appfrom the website (www.lgappstv.com). How can I
it th TV?
If you want to check an app you purchased on th
in and view it on the Purchased Apps menu.
Select the ID at the top of Home and check the a
P P h d A
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
121/162
use it on the TV? PagePurchased Apps.
Can I see my purchasedapps history?
Select the ID at the top of Home and check the aPagePurchased Apps.
Sign in to the website (www.lgappstv.com) and
PagePurchaseHistory.
I deleted a paid app - do Ihave to purchase it againto download it?
Apps you have purchased can be re-downloade
charge for up to one year if accidentally erased.You can re-download apps only if they were pur
apps available for service. Select the ID at the to
and re-download apps in My PagePurchased
Problem Solution
Can I use apps from LGSmart TV's LG Smart
Check if the TV model supports LG Smart World
Apps from LG Smart TV's LG Smart World can o
on LG Smart TV.
Al h f th b it (
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
122/162
World on both TV and PC? Also, you can purchase apps from the website (
lgappstv.com) but cannot use them on PC or Macareful when purchasing them.
How can I find out whichID is currently signed in tothe TV?
Select the ID at the top of Home and check the c
signed-in ID in My PageMy Information.
I installed an app on myTV. Where can I see theinstalled app?
Select HOMEMy Apps. All paid and free appson the TV are displayed.
Problem SolutionThe app size shown onscreen differs from theactual app size installedon the TV
The app size shown on screen includes the addi
space needed for installing apps and may differ
app size as actually installed.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
123/162
on the TV.
I forgot my TV password.What should I do?
If you only have the TV account, you cannot recpassword when it is lost. Create a new ID and lo
the ID.
If you signed up on both TV and PC, you can use
Forgot Password? feature on our website (ww
lgappstv.com).
Problem Solution
Do I need to storepayment information on
To purchase paid apps from your TV, you will ne
enter payment method information on the webs
lgappstv.com). If you do not wish to store paym
information you can use the quick payment ser
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
124/162
p ythe website to
purchase paid apps?
information, you can use the quick payment ser
However, the quick payment service is only avathe website and paid apps cannot be purchased
TV unless payment information is stored on the
Can I return an app that Ihave purchased?
As a member, you may not request a refund if y
your mind after purchase.
If there is a defect in the product or a problem oproduct, which does not caused by your fault, y
for a refund. However, the valid reason for refun
provided.
Problem SolutionI am resistered as a
member, but I cannot
purchase paid apps.
Log in with the ID you created on your PC and ad
payment information. Then, log out from TV and
again so you can buy paid apps.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
125/162
ToconnectadedicatedDVRUSBstoragedevice1 ConnectaUSBHDD(40GBorlarger)totheHDDINjackontheTV.
functionworksonlywiththeHDDINjack.
2 USBHDDmustbeinitializedtobeusedforDVR.
Wh ti USB HDD th t h t b i iti li d l t M
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
126/162
WhenconnectingaUSBHDDthathasnotbeeninitialized,selectM
DVR.USBDeviceInitializationscreenappears.3 CompletetheUSBHDDinitialization,andsetTimeshiftModetoOn.
ToremoveaUSBstoragedevice,selectQuickMenuUSBDeviceconfirmthemessagethattheUSBstoragedevicehasbeenremovedetachingitphysically.
TochangeTimeshiftmodeorinitializeUSBstorageWheel(OK)Option
ChangesDVRsettingswhileusingDVR.
O A i ll bl Ti hif M d h
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
127/162
TimeshiftMode
On:AutomaticallyenablesTimeshiftModewhen
turnedon.Off:DisablesTimeshiftMode.
USBDevice
Initialization
TheconnectedHDDbecomesavailableforusew
AlldatastoredonUSBdevicewillbedeleted.
UseofHDD(HardDiskDrive)isrecommended.ForSSD(SolidStatethenumberofwrites/clearsislimited.
AUSBHDDsizeofbetween40GBand2TBisrecommended.
AfterUSBDeviceInitializationtheUSBHDDwillnotberecognized
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
128/162
DatastoredontheUSBdevicemaybedamaged.Datamaintenance
user'sresponsibilityandthemanufacturerisnotresponsiblefordat
IfthereisproblemwithadatasectorontheUSBstoragedevice,itworkproperly.
DVR enables you to record live TV on a USB storage device while view
digital broadcast. You can watch segments of the programme you missand resume viewing from where you left off, even if you have been awTV for a while.
The Timeshift mode can be set up to 90 minutes. (For Italy, it can b
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
129/162
up to 60 minutes.)
If there is problem with a data sector on the USB storage device, it work properly.
Press Wheel(OK) during DVR.
Changes Timeshift MInitialize USB DeviceSwitches to current broadcast
Selects the desired point and plays
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
130/162
Recording starts Live TV Recorded TV Schedule List Schedule Option
Checks definedschedule list
Starts recording fromcurrent point
DVR play control
Shows recorded programmes Sets schedule
Image shown may differ from your TV.
To start recording straight away
Wheel(OK) Recording Starts
Records a programme when you need to leave the room during viewin
Only records the digital broadcast you are currently watching
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
131/162
Only records the digital broadcast you are currently watching.
If you force your TV to power off while recording, the program may
saved. Ideally, you should stop the recording and check that the pr
recorded before turning it off.
Programmes are protected under relevant copyright laws and prior
permission from the copyright holder may be required for copying a
programmes. Recordings made using this device may be used for p
purposes only. It is prohibited to sell, transfer, or lend copyrighted r
to a third party.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
132/162
To schedule recording
Wheel(OK) Schedule
Select schedule
by programme
Selects a programme from the Programme Guide
viewing or recording
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
133/162
by programme viewing or recording.
Select scheduleby date
Selects date, time, and programme for viewing orrecording.
The minimum length of Timer Recording is 2 minutes.
A damaged disk sector may affect some or all of the items on the SList.
The maximum number of items in the Schedule List is 30.
To assure and / or modify schedule list
Wheel(OK) Schedule List
Assures, modifies or deletes the scheduled viewing or recording.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
134/162
ToseeRecordedTV
HOMESmartShareRecordedTV
Selects the recording stored in USB HDD to view / delete it.
Play on previous For a recording once-played in the past plays
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
135/162
Play on previous
playtime
For a recording once-played in the past, plays
the previous playtime.
Play from the start Plays the selected recording from the start.
Delete Deletes the selected recording.
The maximum numberof Recorded TV is 300.
Tocontrolrecordingplayback
PressWheel(OK)buttonontheremotecontrolduringplayback
Selects the desired point and plays. Sets Recording Playback O
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
136/162
p p y
Plays Control
g y
Thumbnail List Clip-Edit/Repeat
Thumbnail List Clip-Edit Repeat Option List
Image shown may differ from your TV.
Download the LG Magic Remote app from Google Play Store or Apple A
to watch TV with your smartphone.
Now you can enjoy your favourite TV shows on your smartphone. (
models only)
Add your favourite channels on your smartphone.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
137/162
You can use the functions such as PREMIUM, MY APPS directly on
smartphone.
Select an item using the TV Search function from your smartphone
it on TV.
Supports Text Input function, so you can enter text easier. (Text ca
entered on some screens.) Select the app's touch pad to control the pointer in the same way a
Magic Remote Control.
The supported functions may vary depending on the TV or the versLG Magic Remote app.
TouseaUSBwired/wirelessmouse
Connect your mouse to the USB port. Use the mouse to move the poin
TV screen and select the menu you want.
Mouse Magic Remote Control
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
138/162
Left Button OK Button on Magic Remote ControWheel Button Wheel Button on Magic Remote Cont
The right and the special buttons on the mouse do not work.
The usability of a wireless USB mouse and keyboard may be affect
Radio Frequency environment and the distance.
TouseaUSBwired/wirelesskeyboard
Connect your keyboard to the USB port. You can enter text with the ke
when using the search function and the Internet.
Text cannot be entered on some screens.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
139/162
Applicable KeyboardsIt is recommended to use the product which is tested for compatib
LG TV.
LOGITECH K200, LOGITECH K400, MICROSOFT Comfort Curve 2000,
MICROSOFT MS800, and LG Electronics ST-800
Touseagamepad
Connect your game pad to the USB port on the TV if the game support
of game pad.
Applicable Game Pads
It i d d t th i d d hi h i t t d f
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
140/162
It is recommended to use an authorized game pad which is tested f
compatibility with LG TV.
Logitech F310, Logitech F510, and Logitech F710
HOME Settings SUPPORT Software Update
Uses Software Update to check and obtain the latest version.
It is also possible to check manually for available updates.
Set it to On.
Wh d t d fil i d t t d th fil i d l
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
141/162
Software Update
When an updated file is detected, the file is downl
automatically.
When the file download is complete, the software
window appears.
Check Update
Version
Checks the latest update version installed. When a
new update is available, the download process caperformed manually.
The latest version can be obtained via the digital broadcast signal o
internet connection.
Changing the programme while downloading the software via a digbroadcast signal interrupts the download process. Returning to theprogramme allows downloading to resume.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
142/162
If software is not updated, certain functions may not work properly [Only Nordic models]You can check whether LG OTA service is available in the DTV chanpressing the red button as you see the Update Found! message undchannel banner.
If the following symptoms occur, please carry out the checks and adju
described below. There may be no malfunction.
HOME Settings SUPPORT Signal Test
Shows the MUX and Service information etc. If you select Antenna & S
Cable & Satellite, a signal test only for Antenna or Cable is displayed.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
143/162
Cab e & Sate te, a s g a test o y o te a o Cab e s d sp ayed.
General
Problem Solution
Cannot view certainprogrammes.
Adjust the location or orientation of the antenna Save the programmes you wish to view later usi
Tuning or Programme Edit.
There is a delay after theTV is switched on beforethe image is fully visible.
This is not a problem. Image noise that may occthe TV is first switched is being cleaned up.
Pictures
HOME Settings SUPPORT Picture Test
First run a Picture Test to verify that the image signal output is normal
If there is no problem with the test image, check external device conne
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
144/162
and broadcast signals.Problem Solution
Images from previous
programme or other
programmess linger or the
screen displays annoyinglines.
Adjust the orientation of the antenna to the T
transmitter, or refer to the manual for instruc
connecting the antenna.
Problem Solution
Vibrating horizontal/vertical
lines and fishnet patterns
appear momentarily.
Such a problem may happen when there is st
electronic interference. Turn off other electro
such as mobile phones, power tools and othe
electrical appliances.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
145/162
The screen display freezes
or does not work properly
during a digital broadcast.
This may occur in case of a weak signal or unreception. Adjust the antenna orientation and
connections.
If the signal strength or quality is low on Man
check with the TV station or administration o
Digital broadcasting is notavailable even though the
cable is connected.
Check with the cable operator providing yoursubscription and/or signal. (Depending on yo
subscription, digital broadcasting may not be
supported.)
Problem Solution
The display is inactive or
unclear when connected to
an HDMI source.
Check the HDMI cable specifications. If you
cable is not genuine, images may fade in and
be displayed properly.
Ensure that all cables are securely connected
connections are not secure images may not
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
146/162
connections are not secure, images may not
displayed.
Does not work with a USB
storage device.
Verify that the USB device and cable is versio
higher.
Sound
HOME Settings SUPPORT Sound Test
First run a Sound Test to verify that the sound signal output is normal.
If there is no problem with the test sound, check connected external d
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
147/162
the broadcast signal.Problem Solution
Screen display is on but there
is no sound.
Check other TV programmes.
Ensure the TV Speaker is set to On.
For an analogue broadcast,stereo is not clear or sound
comes from one speaker only.
In a poor reception area (areas with weak orsignals) or if Multi Audio is not stable, select
Multi Audio.
Adjust the Balance using the Navigation but
Problem Solution
TV sound is not in sync
with the image or the sound
breaks up occasionally.
If the issue affects a specific TV programme
may be caused by problems with the broadc
for the individual station. Check with the TV
your cable operator.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
148/162
The volume changes when Ichange programme.
Volume can vary from programmel to progra Set Auto Volume to On.
Problem Solution
On certain programmes, there
is no sound at all, or only the
background music can be
heard
(in case of a programme
In Language, set LanguageAudio Langua
the language of your choice. Even if you cha
language on Multi Audio, you can go back to
default setup once you turn off the power or
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
149/162
(in case of a programme
created for overseas viewers). the programme.
There is no sound when
connected to HDMI / USB.
Verify that the HDMI cable is high speed.
Check if the USB device and cable is version
higher.
Use only regular music (*mp3) files.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
150/162
Problem Solution
When connected to the
computer, the display is
partially cut off or shifts
to one side.
Set the resolution to support PC input. (If this do
work, reboot the computer.)
Select Screen and adjust Position / Size / Phase.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
151/162
Problems replaying movies in My Media
Problem Solution
I cannot view the files on
the Movie List.
Check whether the file on the USB storage dev
read on a computer.
Check whether the file extension is supported.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
152/162
"This file is invalid."
message appears or the
image display is not normal
even though the sound is
OK.
Make sure that the file replays normally on thecomputer's video player. (Check for damaged f
Check whether the resolution is supported by t
computer.
Verify that the video/audio codec is supported
Verify that the frame rate is supported.
Problem Solution
"Audio not supported."
message appears or the
sound is not normal even
though the image display is
OK.
Make sure that the file replays normally on the
computer's video player. (Check for damaged f
Check if the audio codec is supported by the c
Verify that the bit rate is supported.
Verify that the sample rate is supported.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
153/162
y p pp
Problem Solution
Subtitles are not displayed.
Make sure that the file replays normally on the
computer's video player. (Check for damaged f
Check if the video file has the same name as th
file.
Make sure that the video and subtitle files are
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
154/162
p y
folder. Verify that the subtitle file format is supported
Verify that the subtitle language is supported.
files can be opened in Notepad to check the la
Image shown may differ from your TV.
For information on requesting service, refer to the following menu.
HOMESettingsSUPPORTProduct/Service Info.
RUSSIA only
The working life of this set is 7 years since the date of delivery to c
Cpok c aoo oapa - 7 e co epea oapaopee%=
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
155/162
.
Ukraine Restriction of Hazardous SubstancesThe equipment complies with requirements of the Technical Regulation, in termrestrictions for the use of certain dangerous substances in electrical and electrequipment.
EU Conformity Notice
LG Electronics hereby declares that this product is incompliance with the following Directives.
R&TTE Directive 1999/5/EC
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
156/162
EMC Directive 2004/108/ECLOW VOLTAGE Directive 2006/95/EC
The products described above comply with the essential requirements of the dispecied.
This device is a 2.4 and 5 GHz wideband transmission system, intended for use EU member states and EFTA countries, except in France and Italy where restricapplies.
In Italy the end-user should apply for a license at the national spectrum author
order to obtain authorization to use the device for setting up outdoor radio linksfor supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in areas the RF output power may be limited to 10 mW EIRP in the frequency rang2454 2483.5 MHz. For detailed information the end user should contact the naspectrum authority in France.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
157/162
spectrum authority in France.
European representative:
LG Electronics Inc. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
The product is designed for indoor use only.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
158/162
Information for recycling (take-back oer)
This product may contain parts which could be hazardous to the environment.
It is important that this product be recycled after use.
LGE handles all waste products through an environmentally acceptable recyclinmethod. There are several take-back and recycling systems currently in operatworldwide.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
159/162
Many parts will be reused and recycled, while harmful substances and heavy mare treated by an environmentally friendly method. If you want to nd out moreinformation about our recycling program, please contact your local LG vendor ocorporate representative of LG. and Information of Regional Take back Schemesfound at :
http://www.lg.com/global/sustainability/environment/take-back-recycling.jsp
Disposal of waste batteries (applicable in the European Union
other European countries with separate collection systems)This symbol on the battery or on the packaging indicatethe battery provided with this product shall not be treathousehold waste.
By ensuring these batteries are disposed of correctly, yPb
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
160/162
will help prevent potentially negative consequences for environment and human health which could otherwise be caused by inapproprwaste handling of the battery. The recycling of the materials will help to consernatural resources.
In case of products that for safety, performance or data integrity reasons requi
permanent connection with an incorporated battery, this battery should be repqualied service sta only.
To ensure that the battery will be treated properly, hand over the product at enof-life to the applicable collection point for the recycling of electrical and electrequipment.
For all other batteries, please view the section on how to remove the battery fr
product safely. Hand the battery over to the applicable collection point for the rof waste batteries.
For more detailed information about recycling of this product or battery, pleaseyour local authority, your household waste disposal service or the shop where purchased the product.
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
161/162
On Disposal (Only, LCD TV with Hg lamp)
The uorescent lamp used in this product contains a small amount of mercu
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulation
local authority.
Energy Saving
Energy eciency cuts energy consumption and thus saves money by reducingelectricity bills.
The following indications allow to reduce power consumption when the televisibeing watched:
turning the television o at its mains supply, or un-plugging it, will cut ener
-
7/27/2019 NC3_HM_EU_L09(1SU)120831_ENG
162/162
zero for all televisions, and is recommended when the television is not being
for a long time, e.g. when on holiday, putting the television into standby mode, will reduce energy consumption, b
still draw some power, reducing the brightness of the screen will reduce energy use.