nukon - СИСМТЕМИ ЗА АВТОМАТИЗАЦИЯ НА ФИБЕР ЛАЗЕРНИ...
TRANSCRIPT
1
NUKON AUTOMATION
SHEET STORAGE SYSTEMS
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
NUKON AUTOMATION SHEET STORAGE SYSTEMS
2
AUTOMATION LASERS WHICH INCREASE YOUR PRODUCTION EFFICIENCY
Nukon automation systems increase your machines productivity and present high quality productıon opportunities in low time . It provides excellent
solution wıth semi-automatic and fully automatic options.
LOADING-UNLOADING WITH TOWER SYSTEM
Compact Lift Tower
LOADING-UNLOADING SYSTEM
Compact Lift
LOADING SYSTEM
N-Lift
Lift Tech
Expert Lift
Expert Lift Tower
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
N - LIFT 3
N-LIFT has been designed for loading sheets tomachines automatically.
Machine operates at high efficiency and increasescapacity of production with N-LIFT.
N-LIFT minimizes space requirements with compactdesign.
N-LIFT, thanks to the automation system can beprogrammed structure.
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
N - LIFT 4
We use high quality padsGermany Schmalz brand whichhas double suction for vacuuming.
47 seconds cycle time
Schmalz Vacuum Systems
Dry-type vacuum pump is usedwith 25 m3 / h capacity
Safety system sensors areavailable in the workplace.
It has flexible structure with 76°angle which can load tomachine.
Hidraulic Power Unit
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
N - LIFT 5
Subject to change. Only specifications in our order confirmation are binding.
TECHNICAL SPECIFICATIONS
For NUKON machines REX , VENTO , NF PRO 315
Max lifting capacity 750 Kg
Max lifting height 600 mm
Max sheet size 1500x3000 mm
Min sheet thickness 0.5 mm
Carrying surface of load Plain, Soft burr
Carrying of load Horizontal
Quantity of vacuum ø210 / 8 pieces
Cycle time 45 sec
Max lifting speed 20 m/min
Max angle of rotation 76 °
Total machine power 5.5 kw
Approximately weight 2500 kg
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
LIFT TECH 6
LIFT TECH has been designed for loading sheets to machinesautomatically.
Machine operates at high efficiency and increases capacity ofproduction with LIFT TECH.
LIFT TECH create lower costs by increasing productivity with aconnected system from stock to machine.
The LIFT - TECH loading ECO-S LINE 1530, NF PRO 315.
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
LIFT TECH 7
We use special designed reducerand motor to increase the qualityof machine usage.
30% energy savings with couter balance system
Positioning is provided by servo- motors.
We use high quality padsGermany Schmalz brand whichhas double suction for vacuuming.
Schmalz Vacuum System
THK Linear Guide Dry-type vacuum pump is used
with 25 m3 / h capacity
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
LIFT TECH 8
You can supply two machines at the same time with Lift Tech that is increased your capacity utilization.
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
LIFT TECH 9
Production efficiency is increased by taking
metal sheet from three different place with LIFT TECH
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
LIFT TECH
Subject to change. Only specifications in our order confirmation are binding.
TECHNICAL SPECIFICATIONS
For NUKON machines ECO 1530 - NF PRO 315
Max lifting capacity 900 kg
Max lifting height 1200 mm
Max sheet size 1500x3000 mm
Min sheet thickness 0.5 mm
Carrying surface of load Plain, soft burr
Loads moving Horizontal
Quantity of vacuum ø 210 / 8 pieces
Max lifting speed 20 m/min
Max angle of rotation 180 °
Total machine power 4.25 kw
Approximately weight 3000 kg
10
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
11
Loading and unloading is done automatically on your machine with Compact Lift.
By reason of single car, installed power is lower than Expert Lift.
It allows to produce without requiring operator intervention
Supported rakes for scratch-free unloading.
COMPACT LIFT
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
12
It is more suitable for single machine.
System’s height is less than Expert Lift. It provides less space by volume for customer
place.
Vacuums and rakes are combined on the same unit. It provides less electrcity
consumption
It submits differents lay-out.
Latitudinal Longitudinal
COMPACT LIFT
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
13
Subject to change. Only specifications in our order confirmation are binding.
315 420
4000 mm
1500 mm 2000 mm
Min sheet size for loading-unloading 1000 x 2000 mm 1000 x 2000 mm
Carrying capacity of loading pallet 3000 kg 3000 kg
Min-Max sheet thickness 0,5-25 mm 0,5-25 mm
Max sheet weight 900 kg 1600 kg
Quantity of vacuum ø 160 / 20 pieces ø 160 / 20 pieces
Max horizontal travelling speed 12 m/min 12 m/min
Carrier cars travelling speed 8 m/min 8m/min
TECHNICAL SPECIFICATIONS
For NUKON machines
Available sheet length 3000 mm
Available sheet width
COMPACT LIFT
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
EXPERT LIFT 14
Loading and unloading is done automatically on your machine with Expert Lift Compact.
It has 57 seconds cycle time which is designed to improve productivity.
Sheets which are separated by vacuum suction cups is transferred to the pallet exchange
table
It allows to produce without requiring operator intervention
Vibrating system is used to separate the sheet which are stuck together.
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
15
It increases the capacity utilization working together loading-unloading system andmachine.
It minimizes space requirements with compact design.
Expert Lift Compact can be installed both side of Nukon lasers according to request.
It provides the exact solution of single sheet detection with sheeting magnet and
double-plate control system.
We use high quality pads Germany Schmalz brand which has double suction for
vacuuming.
EXPERT LIFT
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
16
Subject to change. Only specifications in our order confirmation are binding.
TECHNICAL SPECIFICATIONS
For NUKON machines 315 420
Available sheet length 3000 mm 4000 mm
Available sheet width 1500 mm 2000 mm
Min sheet size for loading-unloading 1000 x 2000 mm 1000 x 2000 mm
Carrying capacity of loading pallet 3000 kg 3000 kg
Min-Max sheet thickness 0,5-25 mm 0,5-25 mm
Max sheet weight 900 kg 1600 kg
Quantity of vacuum ø 160 / 20 pieces ø 160 / 20 pieces
Max horizontal travelling speed 12 m/min 12 m/min
Max vertical travelling speed 12 m/min 12 m/min
EXPERT LIFT
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
17
Tower System provides excellentsolution for continuous production by
combining automated pallet change
with compact storage technique
More efficient operation is providedowning to automated operation.
Getting high quality owning totransport of sheet without scratching
and deforming.
Non-stop cutting is continued.
TOWER SYSTEM
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
18
Integration of the processing machine
Modular structure that can grow according to the request
Lower costs due to the compact lay-out
%75 saving time of loading-unloading
Fast, safety , easy usage
Cost of low purchase
TOWER SYSTEM
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
19
Subject to change. Only specifications in our order confirmation are binding.
TECHNICAL SPECIFICATIONS
For NUKON machines 315 420
Available sheet length 3000 mm 4000 mm
Available sheet width 1500 mm 2000 mm
Min sheet size for loading-unloading 1000 x 2000 mm 1000 x 2000 mm
Carrying capacity of each loading pallet 3000 kg 3000 kg
Max pallet height 255 mm (Al) 150 mm (Al)
Max tower height 25 m 25 m
Max horizontal travelling speed 12 m/min 12 m/min
Max vertical travelling speed 12 m/min 12 m/min
Tower lift speed 18 m/min 18 m/min
Tower pallet pulling speed 32 m/min 32 m/min
TOWER SYSTEM
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
20
Option-1 Option -2
COMPACT LIFT TOWER
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg
21 EXPERT LIFT TOWER
Dunav №5 Blvd. | 4000 Plovdiv, Bulgaria | Phone: +359 32 940 969 | Fax: +359 32 940 767 | [email protected] | www.nukon.bg