���� ������� �� ���

�������������

�����������

������������

������

����� ����������������

�������

��������

������

������

������

�������

�������

������

�������

������������

������

����� ������������ ����������

������

��������������� ���

���

����� ������� �����������

�����������

OptiSwitch® 9000 Metro Ethernet Series

OverviewThe OptiSwitch 9000 series is a carrier-class Ethernet/IP/MPLS optical switch for Metro Ethernet aggregation services. The OS9000 series offers a wide range of aggregation models with optical modularity including WDM technology integration, to address fi ber optimized transport for business and residential services offered in 1st and 2nd mile provider networks.The OS9000 Metro Aggregation series enables the service providers a full suite of Carrier-grade Ethernet services with associated high-availability, quality of services, security and Ethernet Operation, Administration and Maintenance (OAM) support.

Product highlights: - Metro Ethernet E-Line, E-LAN & EPL services - MEF 9 and MEF 14 conformance - Up to 32,000 traffi c management profi les - QoS compliance to latest IETF/MEF standards - IP/MPLS and WDM services - High availability protocols at Layers 2 and 3 - Modular Master-OS™ software for current and future services

Ethernet in the First Mile aggregation

IP DSLAM Optical Aggregationand Inter-PoP Multi- Gigabit WDMand Inter-PoP Multi- Gigabit WDM

Multimedia Aggregation ServicesMultimedia Aggregation Services

Intelligent Wavelength MuxingITU-T grid (G.694.2)

Applications1st and 2nd mile optical switched or transport services - Ethernet in the First Mile aggregation - Intelligent Service Multiplexing & bandwidth provisioningInter-PoP WDM connectivity services IP DSLAM Gigabit Ethernet Optical AggregationPoint-to-point and multi-point Layer 2 services for business subscribers - E-Line services - E-LAN services - Private Line Services

OptiSwitch 9024-M

OptiSwitch 9024-4COptiSwitch 9024FX-4GC

OptiSwitch 9024M-210Gx

OptiSwitch 9024-4C

OptiSwitch 9052

Not sure what solution best fi ts your needs? Visit www.mrv.com or e-mail us at sales@mrv.com

Datasheet

The OptiSwitch® 9000 series is an intelligent platform with a comprehensive traffi c management suite with distributive modular software and hardware architecture. The incorporation of cutting-edge technology enables it to meet current and future needs. Robust and highly fl exible, it can be applied to provide telecommunications applications and is suited for next generation inter-converged IP and Ethernet networks.

The product line is targeted for providers’ Central Offi ces, street cabinets, and Multi-Tenant Units (MTUs) basements or Mini-PoPs, and is the ideal solution for deployments, especially where utilization of minimal rack space is critical.

System Architecture

OptiSwitch® 9000 series is a high-performance system with non-blocking hardware and software architecture engineered for deployment in new demanding Ethernet network environments to support the provider’s value-added services offering.

The platform offers a unique combination of features and optical interfaces that enable easy and fl exible fi eld confi gurations while making it ideal for maintenance and inventory.

Back-to-back installation in Telco racksThe OptiSwitch® 9000 series’ 10-inch depth design enables the installation of two systems, back-to-back in standard 19-inch Telco racks. This feature enables doubling the ‘port-per-rack’ density.

Front facing system confi gurationThis feature eliminates the need to dismount the system for maintenance or installation of new hardware following initial installation.

Fiber guard/protection tray The front fi ber tray is indented in relation to the front panel to allow additional space for connectors and cabling to be conveniently connected to the rack. This indentation is ideal for installations of high-density fi ber optic cables, where connector space is critical for connector integrity.

Optical SFP interfacesSFP interfaces provide unmatched deployment fl exibility to enable versatile multimode, singlemode, and single fi ber connections, or even shared physical fi ber CWDM or DWDM connections – simply by means of a specifi c SFP. In addition, the OptiSwitch® 9000 series offers the optional MultiService optical WDM module (O9-ADCxx) for Add/Drop and aggregation from its optical interfaces to a single outgoing fi ber.

Such a function offers better fi ber utilization and physical services separation with dedicated Gigabit rate for premium services for businesses that are geographically dispersed.

Intelligent Layer 2 switching - Provider bridges concept - Customer VLAN & Service VLAN (VLAN & CoS preservation) - Per VLAN non-learning - transparent mode - Support for jumbo frames up to 9K bytes - Multicast, Broadcast service control, delivery, and fi ltering - Layer 2 control protocols (discard and tunnel) processing - Fault tolerance and Loop protection - Multiple Instance Spanning Tree (IEEE802.1s) - Link Aggregation (LAG + LACP IEEE802.3ad) - 1:1 Link LOS protection for dual-homed & dual rings - Link Fault Refl ection MPLS L2 VPN - LER & LSR / H-VPLS Spoke (PE-r) IP Service Delivery - Complete routing set of IGP and EGP protocolsIP Multicast Services - IGMP snooping V1 & V2, - Multicast VLAN registration protocol - Multicast router functionality PIM*Classifi cation and Marking on VLAN priority/IP ToS/MPLS EXPClass-aware bandwidth profi les - Per Inbound Interface service - Per VLAN/subscriber service - Per Class (CoS ID) service - Layer 3 and/or Layer 4 packet headersSecurity ACLs (Access control and Layer 2 fi ltering)Enhanced secure management (SSHv2, SCP & SNMPv3)Statistics per subscriber - Statistics used by subscriber/VLAN service or per application class - Counters per physical port per CoS - Counters per queue Security logs/trapsService OAM IEEE802.1ag/ITU-T Y.1731 CFMEFM Link OAM IEEE802.3ah CO functions Optical level monitoring (Digital Diagnostics) via SFPsVirtual Cable Diagnostics (VCD - Copper TDR) on RJ45 Ports

Features

Small form factor – ideal for small and medium Point-of-Presence (PoP) installations Effi cient rack space-saving form factor with front facing ports and power supplies

System models :

Hot-swappable SFP optics support SX, LX, BX, ELX, ZX, EZX & xWDM

10GE LAN/WAN PHY - 10Gx models

MS-9000 multi-service slot for optional Optical Add-Drop and wavelength Multiplexing - Wavelength services (physical separation) AC/DC redundant (1+1) hot-swappable load sharing power supplies

n+1 redundant fans Environmental monitoring with built-in temperature sensing

Hardware

OS9024M-210GX 24 GE +2 10GE: 24 GE Tri-mode (100/1000FX SFP or RJ45) + 2 10GE (XFP) ports

OS9024-M 24 GE: 24 GE Tri mode (100/1000 FX SFP or RJ45) portsOS9024-4C 24 GE: 20 GE SFPs + 4 GE Combo (SFP/RJ45) portsOS9024FX-4GC 24 FE + 4 GE: 24 Fast Ethernet 100FX SFP + 4GE combo

(SFP or RJ45) portsOS9052 FE 48 x10/100BaseT + 4GE SFP ports

OptiSwitch® 9000 Quality of ServiceCarriers can offer different types of traffi c/services carried into IP/Ethernet networks with better control in order to reduce the load from their core networks, using the following features:

The OptiSwitch® 9000 series enables a value-added network infrastructure, with end-to-end QoS. The OptiSwitch® 9000 advanced ASIC design supports full CoS and QoS including classifi cation, rate limiting, shaping, weighted round-robin scheduling, and strict priority for lower delay, low jitter and guaranteed throughput in real-time applications, including voice over IP, video-on-demand, and IP TV services. For network convergence applications that have a clear boundary between customer’s and carrier’s networks, Layer 3 (IP ToS) and Layer 2 CoS (802.1p) can be mapped/marked to preserve priorities or map them into predefi ned profi les set by the carrier.

SecurityThe OptiSwitch® 9000 series offers advanced security capabilities that can provide protection against malicious attacks while enabling Authentication, Authorization and Accounting (AAA). The internal security engine can administer vast Access Lists and advanced features such as port security, and set of Layer 2-4 network traffi c security policies.

Access Control List (ACL) mechanismsThe OptiSwitch® 9000 ASIC-based technology enables a secure environment, preventing Denial of Service (DoS) attacks by using a range of layer-independent ACL together with QoS protective techniques such as rate limit for per-service based streams, source MAC address learning limit, and comprehensive IP ACL rules. Each Access list has an action rule that determines whether a packet will be forwarded or dropped or rate limited in case of an unsuccessful hit. If a packet satisfi es an ACL rule at any layer, various handling actions can be defi ned.

Per-service performance monitoringThe OptiSwitch® 9000 series enables the collection of extensive statistics and diagnostics to enable fl exible billing, traffi c planning and rapid troubleshooting. Thanks to this spectrum of statistics, service providers can better tune their network operation, in general, and bandwidth, in particular, and charge customers accordingly.The spectrum includes:

• Statistics profi les (packets and bytes counters) • Ingress and egress byte statistics used by subscriber/ service (VLAN-EVC) or per class • Counters per physical port per CoS • Counters per queues

OptiSwitch® 9000 MPLSThe OS9000 series enables Layer 2 VPN services based on Ethernet over MPLS protocol. It supports Martini MPLS L2VPN, and Hierarchical VPLS (H-VPLS) PE-r spoke services that scale the VPLS service and simplifi es multipoint topology. The MPLS L2VPN offers Virtual Leased Line (VLL) services or Pseudo Wire Emulation Edge-to-Edge (PWE3) regardless of traversing protocols. The MPLS functionality is enforced with highly fl exible mechanisms to create traffi c engineering (RSVP-TE/CR-LDP) connection-oriented paths and predifi ned rules for protection.

• Layer 2-4 packet classifi cation using QoS access control entries

• CoS mapping between layers (802.1p, IP ToS or EXP MPLS) • Traffi c management using ingress policing and egress traffi c shaping

• Bandwidth enforcement per fl ow: single and dual rate tree-color marking

• Congestion management – Scheduling of fl ows to interfaces

Layer 2 security • Management VLAN • Isolation of Customer VLAN from Provider VLAN • Layer 2 management protocols fi ltering and tunneling • MAC fl ood protection security • Port-based authorization/control - IEEE802.1x*

Layer 2-4 profi les• Access Lists – inspect each incoming packet and permit/deny according to predefi ned rules• Rate limit for protection against Denial-of-Service (DoS) • IP spoofi ng protection in ASIC – Filtering of incoming packets spoofed from an indirect network connection by an IP source• CPU DoS protection and Internal fi rewall

Management - OAMThe OS9000 Series control plane incorporates a list of highly manageable feature that offers ensured interaction with carrier’s OSS and NMS platforms, based on industry standard Southbound out-of-band or in-band interfaces. In addition, it can be managed via MRV’s MegaVision-Pro NMS to have complete GUI and Northbound gateway (XML, TL1 & SNMP) of an entire map of clustered devices for confi guration, performance analysis, and inventory control. The OS9000 incorporates enhanced standards compliant MEF OAM and gives the service provider the ability to monitor the network and provision services, and promptly determine the location of faults remotely from the network operation center

Copper TDR - Virtual Cable Diagnostics The OS9000 incorporates copper TDR that can identify problems with CAT5 copper cables on a customer’s site such as opens, shorts and wrong impedance. The copper port operates as an extension to localized servers or any service over CAT5/CAT6 in a radius of up to 100 meters. VCD™ feature offers a simple command through which we can remotely analyze the copper lines and get a clear status of the following possible problems:

1. Report of cable shorts 2. Cut on a cable and its location3. Impedance problems (connectors or bad quality cable)

Optical Performance Level Monitoring (Digital Diagnostics)The OS9000 Series supports the SFP Digital Diagnostics standard (as per SFF-8472). A powerful OPM tool, it provides access to a number of real-time SFP operating parameters such as optical TX/RX power, voltage and temperature, as well as component information such as vendor code, serial number and wavelength. The information provided by Digital Diagnostics, together with alarm and warning thresholds, enables a network administrator to identify potential problems in optical transmission and take preemptive action before any service outage actually occurs.

Link Fault Refl ection/PropogationThe link fault refl ection propogates the fault from network interface to user interface. Such functionality is confi gurable and operated on LOS fault that will trigger the user link to down mode. In scenario of network interfaces protection, the fault propogation will be triggered only after the LOS of both network interfaces.

CES Module descriptionThe EM9K-CES-4E1/T1 modules can be hosted in the OS9024M-210Gx model and enable Circuit Emulation Services (CES) functionality transporting 4 full structured or unstructured E1/T1 circuits over an Ethernet/IP/MPLS networks. The modules comply with IETF PWE3 SAToP and CESoPSN industry standards, as well as with the Metro Ethernet Forum’s MEF-8 specifi cations. The modules perform emulation of T1 or E1 synchronous circuits by incorporating TDM bitstreams into packets and transmitting them over packet-switched networks as streams of packets. These streams are referred to as pseudo-wires (PW) or Ethernet Virtual Circuits (EVC) (tagged with VLAN or MPLS labeled) and marked with real-time priority for strict priority forwarding and minimal latency, jitter & packet loss. A pseudo-wire can transport a

full TDM circuit or a bundle of time slots from a TDM structured circuit.

Optical performance monitoring

Specifi cations

Physical ports: • Hot-swappable SFP optics – short /long haul multi-rate and xWDM• WDM slot for Fiber optimization

Power supply:• AC/DC options - hot-swap • 1+1 redundancy - hot-swap

Mounting:• Rack mounting: 19” & 23” mounting• Front facing elements

Hardware• Auto-MDI/MDIX on copper ports• Jumbo frames (9Kbytes) on all ports• Environmental sensor

Switching services• IEEE 802.1Q and IEEE802.1ad provider bridges - 4K active VLANs - Q-in-Q stacking (c-VLAN / s-VLAN ) - Hybrid ports and Private VLANs• Transparent cross-connect mode (No MAC learning)• Redirect action • Learning table limit per VLAN/port • Layer 2 Control Protocol tunneling (BPDU, CDP, VTP, PVST+ etc.)• Tagged BPDU transmit/receive and tunnel • Link and Service protection - Automatic Optical switching on network interfaces (1:1) - IEEE802.3ad Link Aggregation and LACP - Multiple Instance Spanning Tree IEEE802.1s & compatibility to 802.1w/d - Link / ports fl ap guard

Traffi c management services – MEF compliant • Traffi c management per fl ow • Classifi cation by physical port, MAC, Ethertype, VLAN, IP/TCP/UDP, IEEE 802.1p (VPT), DiffServ • Marking/remarking profi les between layers (802.1p ToS & MPLS EXP) • Single/Dual leaky bucket policers - 3 conformance levels (CIR/PIR)• Egress shaping per queue/port • In-profi le & out-of-profi le service counter sets ( per UNI, CoS, EVC)

Tunneling - L2 services • Q-in-Q - mapped mode to MPLS VC • Layer 2 VPN – Martini MPLS pseudo-wire LER/LSR - LDP, CR-LDP, RSVP-TE, OSPF-TE, CSPF, E-LSP• Spoke H-VPLS - MTU-r with dual-home VC protection

IP services• IGP and EGP routing – Master-OS™ - Routing Information Protocol (RIP v1, v2) - Open Shortest Path First (OSPF) - Intermediate System to Intermediate System (IS - IS) Protocol - Border Gateway Protocol Version 4 (BGPv4) - Virtual Router Redundancy Protocol (VRRP) - Secondary IP Interfaces and loopback - DHCP Server/Relay - DHCP Option 82• Multicasting - IGMP snooping and static multicast forwarding - MVR - Multicast Vlan Registration - Multicast routing PIM SM*

Security• Wire-speed Access Control Lists - L2-3-4: from frame to application layer• MAC, ARP and BPDU fi ltering• Rate limit protection for Unicast/Multicast/Broadcast packets• BPDU Storm Guard• Port link fl ap dampening

Management & Diagnostics Tools• Industry Standard CLI• Out-of-band management – EIA-232 console• Out-of-band Ethernet management – Dedicated Ethernet RJ45 port• Telnet, SSH v2, SNMPv3, RMON (4 groups) • Port mirroring - ingress & egress traffi c to analyzer port • Ping, Trace route, DNS lookup, TCP dump (built-in sniffer)• Management ACL for trusted connections (Telnet, SSH, SNMP) • VACM - View-based Access Control Model• Hierarchical Administration policy • RADIUS Autentication Accounting • Confi guration load/save via FTP, Secure Copy (SCP)• NTP – Network Time Protocol • Logging - Syslog /Remote Syslog• Scripting tool for macro confi gurations & maintenance• Action scheduler for automated rules (time/day/cycle)

OAM - Service Assurance Tools• Enhanced performance monitoring and SLA management • End-to-end Service OAM - Connectivity Fault Management - IEEE802.1ag (MEP/MIP) - Performance Measurement ITU Y.1731 (Latency, Jitter & loss) • Round Trip Reporter for IP Services• Link OAM IEEE 802.3ah - EFM CO functions• Physical layer OAM - Cable Diagnostics - Optical signal level monitoring (SFP SFF-8472) - Copper TDR on RJ45 ports• Remote failure notifi cation / refl ection - Link Integrity Notifi cation (LIN)• Binding OAM CCM for service protection mechanisms

Model Services Model Description

OS9024M-210Gx IP/Ethernet/MPLS Business aggrega-tion for 1000FX/100FX services & Dual 10GE LAN/WAN OC192 interconnec-tion & Intelligent WDM Services- Circuit Emulation Services

24 GigE multipurpose Tri-mode ports - 100FX SFP / 1000FX SFP or built-in RJ45 10/100/1000T + 2 10GX (XFP) uplink- CES line cards (EM9K-CES-4E1/T1c)- WDM line cards

OS9024-M IP/Ethernet/MPLS Universal aggrega-tion for 100FX/1000FX & localized MTU/CO services & Intelligent WDM Services

24 GigE multipurpose Tri-mode ports - 100FX SFP / 1000FX SFP or built-in RJ45 10/100/1000T. - WDM line cards

OS9024-4C IP/Ethernet/MPLS Business aggrega-tion for 1000FX services & Intelligent WDM Services

24GigE platform with 20 unpopulated 1000BaseX SFPs and 4GigE Combo - Dual mode (SFP or RJ45 10/100/1000T) ports- WDM line cards

OS9024FX-4Gc Residential broadband aggregation (100FX) , Small business aggregation of 100FX lines & Intelligent WDM Services

24 unpopulated 100BaseX SFPs and 4 GigE Dual mode (SFP or RJ45 10/100/1000T) ports - WDM line cards

OS9052 Residential broadband aggregation (100FX) , Small business aggregation of indoor CAT5 lines

48 10/100BaseT and 4 GigE SFP ports

Products Matrix

Ethernet/MPLS/IP intelligence and WDM services integrated on a single platform – Seamless adaptive migration path on one same platform for new services Carrier-class small form factor design – only 10” depth – Saving of rack space and matching fi rst mile densities – Two systems can be installed in a back-to-back mode inside a 19” rack – Front loadable hot-swap elements for maintainability and availabilityOptical Interfaces fl exibility/modularity for any fi ber extension – Reduction of inventory stock and operational costsEnhanced QoS for different profi les as defi ned by the MEF – Tiered services with industry-class SLAsEnhanced OAM – IEEE802.3ah, IEEE802.1ag, ITU-T Y.1731, MPLS OAM – Simplifi es, monitors and troubleshoots services/applicationsCircuit Emulation over Ethernet/IP/MPLS networks – P2P and point-to-multipoint topologies over wired & wireless – Emulates traditional circuits and services over packet networks – Preserves native TDM functionality, signaling and clocking

Products highlights and benefi ts

Standard Com-pliance

UL-1950; FCC part 15 Class A;CE-89/336/EEC,73/23/EECDesigned to meet NEBS/ETSI**

Environment Operating Temp. : 0˚ to 50˚C / 32˚ to 122˚F Storage temp: -25 to 70˚C / -13 to 158˚F Cooling: Side-to-side airfl owHumidity 95% maximum , non-condensingDiagnostic LEDs Power, Power RST, Temperature, FAN, Management, PS1 & PS2

Online / Active / AlarmPorts: Link, activity

Mounting Standard 19” & 23” Telco Rack MountingPerformance Non-blocking full-wire forwarding on all ports Physical Dimensions

OS9024-4C: Height: 2 U Size (W x D x H): 444x300x88.1 mm 17.5x11.81x2.7 Inch Weight: 7 Kg/15.4 lbs OS9024-M: Height: 3 U Size (W x D x H): 444x250x132 mm 17.5x9.84x5.19 Inch Weight: 7 Kg/15.4 lbs OS9024M-210Gx: Height: 4 U Size (W x D x H): 444x250x176 mm 17.5x9.84x6.94 Inch Weight: 10.8 Kg/23.8 lbs OS9024FX-4GC: Height: 2 U Size (W x D x H): 444x300x88.1 mm 17.5x11.81x2.7 Inch Weight: 7 Kg/15.4 lbs OS9052: Height: 2 U Size (W x D x H): 444x300x88.1 mm 17.5x11.81x2.7 Inch Weight: 7 Kg/15.4 lbs

Power (AC/DC) Auto range: 90-240 VAC AC Line Frequency 50-60 Hz DC Input Voltage Options -48VDC (-36VDC to 72VDC) BTU (min/max) per hour

OS9024-4C: 240 / 410 OS9024-M: 308 / 532 OS9024FX-4GC: 240 / 437 OS9024M-210Gx: 448 / 939 OS9052: 240 / 437

MTBF OS9024-4C: 248,121 HRS @ 25˚C /77˚F OS9024-M: 137,620 HRS @ 25˚C /77˚F OS9024FX-4GC: 206,316 HRS @ 25˚C /77˚FOS9024M-210Gx: 102,113 HRS @ 25˚C /77˚F OS9052: 248,121 HRS @ 25˚C /77˚F

Chassis Power Consumption

OS9024-4C: 70W min, 120W max OS9024-M: 90W min, 156W max OS9024FX-4GC: 70W min, 128W max OS9024M-210Gx: 190W min, 274W max OS9052: 70W min, 128W max

Power AC OS9024-4C: 90-240 VAC (0.7A min, 1.3A max) OS9024-M: 90-240 VAC (1A min, 1.7A max) OS9024FX-4GC: -36/-72 VDC (0.7A min, 1.4A max) OS9024M-210Gx: 90-240 VAC (1.1A min, 1.9A max) OS9052: 90-240 VAC (0.7A min, 1.4A max)

Power DC OS9024-4C: -36/-72 VDC (2A min, 3.3A max) OS9024-M: -36/-72 VDC (2.5A min, 4.3A max) OS9024FX-4GC: 90-240 VDC (2A min, 3.5A max) OS9024M-210Gx: -36/-72 VDC (3.9A min, 5.7A max) OS9052: -36/-72 VDC (2A min, 3.5A max)

OADM, Mux/Demux maximum attenuation (db)

Type Max. In-Out loss Dual Max. In-Out loss Single Max. In-Drop/Add - Out loss

1 channel OADM2 channel OADM3 channel OADM4 channel OADM

8 channel Mux/DMux

0.91.31.72.1

1.32.12.93.7

1.31.3 / 1.7

1.3 / 1.7 / 2.11.3 / 1.7 / 2.1 / 2.5

3.3For technical specifi cations of SFP/XFP Pluggable optics, please refer to MRV’s web site

OptiSwitch 9000 - Technical Specifi cations

OS9000 Metro Ethernet 1st / 2nd mile Aggregation SeriesServices and Interfaces OS9024M-210G OS9024-M OS9024FX-4Gc OS9052

MEF Services and Certifi cations EPL, E-Line, E-LAN, E-Tree; MEF 9, 14

EPL, E-Line, E-LAN, E-Tree; MEF 9, 14

EPL, E-Line, E-LAN, E-Tree; MEF 9, 14

EPL, E-Line, E-LAN, E-Tree; MEF 9, 14

Non-blocking architecture wire-speed forwarding

+ + + +

All ports can serve as UNI / ENNI + + + +

10/100Base-T 48

100Base-FX SFP 24

10/100/1000Base-T or 100/1000Base-FX SFP 24 24

10/100/1000Base-T or 1000Base-FX SFP 4

1000Base-FX SFP 4

10G-Base-X XFP (LAN / WAN - OC192/STM64)

2

WDM multi-service slot + + +

Hot Swappable SFP Optics Short/Long Haul, Multi-rate, BX & WDM

Short/Long Haul, Multi-rate, BX & WDM

Short/Long Haul, Multi-rate, BX & WDM

Short/Long Haul, Multi-rate, BX & WDM

Power Supply AC=A, DC=D, Dual-Red.=2 H=Hot-swap PS H - A,D, 2/A/D H - A,D,2A,2D H - A,D,2A,2D H - A,D,2A,2D

Product DescriptionOS9000 Metro Series OS9024M-210Gx OptiSwitch® 9000 series multi-layer platform with 24 GE multipurpose Tri-mode ports 100FX SFP/

1000FX or built-in RJ45 10/100/1000T + 2 10GX (XFP) uplinks and 2 optional WDM slots (power supplies should be ordered separately - 2 power supplies mandatory and 2 for redundancy)

OS9024-4C OptiSwitch® 9000 series multi-layer 24 GigE platform with 20 unpopulated 1000BaseX SFPs and 4 GigE combo - dual mode (SFP or RJ45 10/100/1000T) ports (power supplies should be ordered separately)

OS9024-M OptiSwitch® 9000 series multi-layer platform with 24 GigE multipurpose tri mode ports - 100FX SFP/ 1000FX SFP or built-in RJ45 10/100/1000T. (power supplies should be ordered separately)

OS9024FX-4GC OptiSwitch® 9000 series multi-layer platform with 24 unpopulated 100BaseX SFPs and 4 GigE dual-mode (SFP or RJ45 10/100/1000T) ports (power supplies should be ordered separately )

OS9052 OptiSwitch® 9000 series multi-layer platform with 48 10/100BaseT and 4 GigE SFP ports (power supplies should be ordered separately)

Pluggable Power Supplies EM9005-PS/AC AC power supply for the OptiSwitch® 9000 series (90-240V AC)EM9005-PS/DC DC power supply for the OptiSwitch® 9000 series (-48V DC)CWDM Service Modules Note: All OS9000 series models include optional WDM slot and can host WDM line cardsO9ADCxxyyzzww 4 CWDM wavelengths DF OADM module for OS9000O9ADCxxyyzz 3 CWDM wavelengths DF OADM module for OS9000O9ADCxxyy 2 CWDM wavelengths DF OADM module for OS9000O9ADCxx 1 CWDM wavelengths DF OADM module for OS9000O9ADCDxxyyzzww 4 CWDM wavelengths DF dual sided OADM module for OS9000O9ADCDxxyyzz 3 CWDM wavelengths DF dual sided OADM module for OS9000O9ADCDxxyy 2 CWDM wavelengths DF dual sided OADM module for OS9000O9ADCDxx 1 CWDM wavelengths DF dual sided OADM module for OS9000O9-Mux/Demux8 8 Wavelengths CWDM Multiplexer/Demultiplexer module for OS9000O9ADCDSxxyyzzww 4 CWDM wavelengths SF dual sided OADM module for OS9000O9ADCDSxxyyzz 3 CWDM wavelengths SF dual sided OADM module for OS9000O9ADCDSxxyy 2 CWDM wavelengths SF dual sided OADM module for OS9000O9ADCDSxx 1 CWDM wavelengths SF dual sided OADM module for OS9000CES (TDM) Service Modules for OS9024M-210Gx modelEM9K-CES-4T1c 4 - ports T1 Circuit Emulation Service module with high-precision clockEM9K-CES-4E1c 4 - ports E1 Circuit Emulation Service module with high-precision clockAccessoriesMS9000-FG Fiber guard tray for OS9024-4c and OS9024FX-4Gc modelsEM9005-BR-2-A 23” mounting brackets for the OS9024-M modelsEM9005-BR-2-B 23” mounting brackets for the OS9024-4c and OS9024FX-4Gc modelsMS9000-Blank Blank panel for multi-service slotEM9005-Blank Blank panel for power supplySoftware Upgrade PackagesSW-UPG-9MPLS Enhanced software upgrade package for OptiSwitch® 9000 series

(Master-OS™: MPLS L2 VPN - L3+LDP, RSVP-TE, CR-LDP, OSPF-TE, CSPF)MegaVision SNMP NMSMV-WEB/PRO MegaVision Pro NMS complete package, includes MegaVision Pro for one server and unlimited

number of web clients.* Represents future software package** xx,yy,zz,ww represents the two middle digits of the wavelength

CWDM Wavelength (optional DWDM)

31 = 1310nm 33 = 1330nm 35 = 1350nm 37 = 1370nm 39 = 1390nm 41 = 1410nm 43 = 1430nm 45 = 1450nm

47 = 1470nm 49 = 1490nm 51 = 1510nm 53 = 1530nm 55 = 1550nm 57 = 1570nm 59 = 1590nm 61 = 1610nm

For ordering codes of SFP/XFP Pluggable optics, please refer to MRV’s web site

MRV-OS-9000 Rev.9 08-08 Copyright ©2008 MRV Communications, Inc. All Rights Reserved.

For ordering codes of SFP/XFP Pluggable optics, please refer to MRV’s web site

Ord

er In

form

atio

n