partsguru - capresso · 13379 ena 5 espresso brown ch [sev] 13380 ena 5 espresso brown eu vg...

RP13330 ENA 3 blossom white CH [SEV] 653 A1

Edition: 25/02/10

The recycling passport is valid for the following articles:13330 ENA 3 blossom white CH [SEV]13453 ENA 5 coffee cherry red UL [UL2]13454 ENA 4 ristretto black UL [UL2]13455 ENA 5 blossom white UL [UL2]13456 ENA 5 ristretto black UL [UL2]13466 ENA 3 white JC [UL2]13467 ENA 3 black JC [UL2]13469 ENA 3 white UL [UL2]13470 ENA 3 black UL [UL2]13476 ENA 3 ristretto black [CCC]13477 ENA 5 blossom white [CCC]13482 ENA 5 ristretto black 60Hz [SCHUKO]13482SA ENA 5 ristretto black SA [GB]13483 ENA 5 blossom white 60Hz [SCHUKO]13483SA ENA 5 blossom white SA [GB]13484 ENA 5 coffee cherry red 60Hz [SCHUKO]13484SA ENA 5 coffee cherry red SA [GB]13486 ENA 5 full black EU VG [SCHUKO]13487 ENA 5 full white EU VG [SCHUKO]13502 ENA X1 ristretto black EU VG [SCHUKO]13513 ENA 3 white 60Hz [SCHUKO]13514 ENA 3 black 60Hz [SCHUKO]13515 ENA 5 blossom white [AUS]13516 ENA 5 ristretto black [AUS]13517 ENA 5 coffee cherry red [AUS]19006 ENA 5 speed red CH [SEV]19007 ENA 5 speed red EU [SCHUKO]19008 ENA 5 sports brown CH [SEV]19009 ENA 5 sports brown EU [SCHUKO]19013 ENA 5 speed red RU [SCHUKO]19014 ENA 5 sports brown RU [SCHUKO]13331 ENA 3 blossom white EU VG [SCHUKO]13354 ENA 5 blossom white CH [SEV]13355 ENA 5 blossom white EU VG [SCHUKO]13377 ENA 3 ristretto black CH [SEV]13378 ENA 3 ristretto black EU VG [SCHUKO]13379 ENA 5 espresso brown CH [SEV]13380 ENA 5 espresso brown EU VG [SCHUKO]13381 ENA 5 coffee cherry red CH [SEV]13382 ENA 5 coffee cherry red EU VG [SCHUKO]13383 ENA 5 blue mountain sky CH [SEV]13384 ENA 5 blue mountain sky EU VG [SCHUKO]13385 ENA 5 crema CH [SEV]13386 ENA 5 crema EU VG [SCHUKO]13398 ENA 5 blossom white EU INT [SCHUKO]13399 ENA 5 espresso brown EU INT [SCHUKO]13400 ENA 5 coffee cherry red EU INT [SCHUKO]13401 ENA 5 blue mountain sky EU INT [SCHUKO]13402 ENA 5 crema EU INT [SCHUKO]13403 ENA 3 blossom white EU INT [SCHUKO]13404 ENA 3 ristretto black EU INT [SCHUKO]13408 ENA 5 coffee leaf green CH [SEV] / 20

PartsG

uru.co

m

For parts, repairs & technical support, contact:

Services Unlimited, Inc./ Parts Guru209 Walnut street, Lansdale, PA 19446

215-361-7000 - email: [email protected] store: www.shop.partsguru.com


Edition: 25/02/10

The Variant designations mean:

13409 ENA 5 coffee leaf green EU VG [SCHUKO]13410 ENA 5 coffee leaf green EU INT [SCHUKO]13420 ENA 5 coffee cherry red JC [UL2]13421 ENA 4 ristretto black JC [UL2]13425 ENA 5 ristretto black CH [SEV]13426 ENA 5 ristretto black EU VG [SCHUKO]13427 ENA 5 ristretto black EU INT [SCHUKO]13441 ENA 5 blossom white JC [UL2]13442 ENA 5 ristretto black JC [UL2]

/ 20

PartsG

uru.co

m




Jura machines are made by Eugster/Frismag AG. in Switzerland, Portugal & in China. Jura as marketing Company does not share technical help or sell parts.

We at Parts Guru sell parts, repair or trade in Jura machines.CLICK HERE to subscribe & watch the 'Do It Yourself' instructional videos for openning the Jura C, E, F, J, S, Z, & ENA series & Saeco machines. Video guides show how to open-close machine, replace grinder, Brew group, tune up the machine & more!Jura Water filters are Expensive & Ineffective. Calcium deposits are seen in every Jura machine opened for repairs.

Calcium deposits inside the machine cause the following problems:

1- Reduces flow of water with partial or total clogging; 2- Generate back pressure; 3- reduce pump pressure; 4- reduce flow of coffee in the cup; 5- Re-direct water for coffee into the drain tray; 6- Display error sign "Fill water tank"; 7- Paralyze the machine for expensive repairs

Descaling is best done manually every two or three months, without waiting for misleading reminders programmed in the Jura machine based on number of coffees served and not based on Calcium contents in water in different locations. CLICK HERE to Order Best descaler (#DSC-6) and follow authentic descaling process.

Jura does not sell parts. There are frustrated Jura owners all over. This frustrated customer described it well:

I am writing from Australia, as I own a Jura Impressa J5 machine that has split the reinforced silicone hose joining the check valve down the bottom of the machine to the thermoblock up the top right hand side of the machine. As you would know Jura won't help me at all (they helped empty AU $2000 from my bank account when I purchased the machine), and won't even discuss alternate options other than sending the machine to them with $500 so they can replace a $20 hose for me. Can you advise an alternate way of fixing it, as I can access silicone hose the same size, but cant find reinforced silicone that size anywhere in Australia. Look forward to your reply Regards, Graham.

We at Parts Guru continue our efforts to provide technical information via e-mails, over the phone when possible & with Video guides posted on our You tube channel "Parts Guru USA". When repair option is not possible due to unavailable parts or prohibitive cost of repairs, we offer Trade-in option for our exclusive Gamea Revo automatic espresso machine, 10 times better than any Jura machine, & priced 3 to 5 times lower.

https://www.youtube.com/user/PartsGuruUSA

https://www.youtube.com/user/PartsGuruUSA

http://www.shop.partsguru.com/DSC-6x2-Gurus-Choice-Best-Descaler-Economy-pack-DSC-6x2.htm

As Good As it Gets - Best value for your MoneyOrder one or Trade-in your old & expensive to repair Jura, Breville, Gaggia

Feel intrigued by Gamea? Call 215-361-7000 to discuss Have questions? E-mail inquiries to [email protected]

Guru's Choice Fully Automatic Espresso maker.Commercial internal components inside a Home model frame

Click picture Gamea Black for details Click picture Gamea Revo Silver

1- Touch screen with App-like Icons program & operate functions. Get used to convenience 2- Plug the machine & use Touch Screen. No Knobs, buttons, or Switches & No problems. 3- Solenoid valves dispense water & steam: Water & Steam valve malfunction eliminated. 4- Easy access Brew group inside door for cleaning & maintenance: Unlike Jura machines. 5- Brew group water intake direct from Heat exchanger: No Boiler valve or its problems 6- Conical burr grinder feeds directly into brew group: Dosing device eliminated 7- Pump (15 Bar) for 9 Bar Coffee extraction pressure control valve & dispensing spout. 8- 1.75 Minute warming up & rinse cycle. 10 Minute non-use turns screen to start screen. 9- 30 minutes non-use shuts off Power control board & boilers. Prevents internal damage. 10- Auto frother with air-intake control knob. Frother is removable for manual steaming. 11- Adjustable features: Coffee temperature from 160F to 180F - Coffee size 1-Oz. to 8 Oz. Cup height 2.0" to 4.25" tall coffee mug. Pre-ground Option-Yes. Coffee strength 3 to 5.

Gamea Revo

Gamea Revo has changed the way Classic

espresso is made

ESC icon displays with each function to stop or interrupt function.

Exclusive selection from - Gamea Revo & Royal One Touch 120V

Super automatic espresso machine. Click Picture for details 1- Easy access Brew group - to clean & maintain -Unlike Jura 2- Easy to clean Removable Auto frother for steaming milk. 3- Display screen for Status & Programming functions. 4- Programmed drinks for One-step delivery: Espresso, Americana, Cappuccino, Latte Macchiato at the push of button. Unlike Jura machines, Tech support & parts available.

http://www.shop.partsguru.com/Gamea-Revo-Matte-Compact-automatic-espresso-maker-120V-Gamea-Revo-Black.htm

http://www.shop.partsguru.com/Gamea-Revo-Silver-automatic-Compact-Espresso-maker-120V-Gamea-Revo-Silver.htm

http://www.shop.partsguru.com/Gamea-Revo-Silver-automatic-Compact-Espresso-maker-120V-Gamea-Revo-Silver.htm

http://www.shop.partsguru.com/Royal-One-Touch-Superautomatic-Cappuccino-machine-115V-HD8930.htm

A New Star is Born.Aulika Top - One Touch High speed

Original Saeco lineage - Unrivalled performance - Plumb option Large waste receptacles for use in Offices, Catering & Rentals

The perfect combination of aesthetics & Professional performance. It has a clean, rational design & unparalleled technology: double hydraulic circuit with two pumps, two

Flowmeters & two boilers. Grinder with conical blades - (far better than flat disc burrs), & 4-Liter water tank & One Kilo coffee beans container. All these characteristics make this machine perfect for families, Offices, Catering, Rentals for Weddings, Graduation &

other celebrations, Corporate Dining, Hotel Conference event, Hotel Lobies, Meeting rooms, & food service, Cafeterias, Restaurants, Pizza stores, or other locations.

(UL listed. Not NSF listed for Commercial use in USA).Be the First proud Owner of an AuLika Top - One Touch High Speed

AuLika Top - One Touch High Speed model delivers a wide range of coffee-based and fresh-milk-based beverages, as well as hot water and steam. The wide graphic display

can manage both icons and text messages in several languages.

The interface is equipped with 8 direct selection keys that make the machine easy to use and program.

For more information email us: [email protected]


Edition: 25/02/10

(1) Case components and water tank

Page 3 / 20

PartsG

uru.co

m


Edition: 25/02/10

Pos Designation Material

0101 Tank lid platinum ABS

0102 Watertank handle ABS

0103 Watertank BLUE Plastic x

0103 Watertank cpl Plastic x

0106 Bolt back grey ABS

0113 Housing lid platinum ABS

0114 Right sectionleather brown

PC / Leather x

0114 Right side sectionwhite

PC x

0114 Right side sectionwhite

ASA x

0115 Left section leatherbrown

PC / Leather x

0115 Left side sectionwhite

PC x

0115 Left side sectionwhite

ASA x

0116 Bolt right grey ABS

0117 Bolt left grey ABS

Page 4 / 20

PartsG

uru.co

m





Edition: 25/02/10

(2) Case components

Page 5 / 20

PartsG

uru.co

m


Edition: 25/02/10


0209 Reed sensorsupport

ABS

0220 Componentssupport ENA above

ABS

0221 Componentssupport ENA bottom

ABS

Page 6 / 20

PartsG

uru.co

m





Edition: 25/02/10

(3) Front cover

Page 7 / 20

PartsG

uru.co

m


Edition: 25/02/10


0303 Magnetic valvesupport

ABS

0314 Front cover ABS

0319 Discharge pipeconnection

PA

0326 Guide for outlet gate PA

0328 Box for outlet gate ABS / NBR x

0328 Box for outlet gatechromium

ABS / NBR x

0332 Outlet gate frontchromium

ABS x

0332 Outlet gate frontplatinum

ABS x

0333 Dispenser ABS

0334 Lid for outlet gatechromium

ABS x

0334 Lid for outlet gate ABS x

0351 Dispenser black POM

0361 Guide for outlet gate PA

0362 Casing white ASA

0363 Dispenserassembled

ABS

0364 Lid for outlet gate ABS

0365 Dispenser ABS

Page 8 / 20

PartsG

uru.co

m





Edition: 25/02/10

(4) Pan

Page 9 / 20

PartsG

uru.co

m


Edition: 25/02/10


0401 Used groundcontainer black

ABS x

0401 Used groundcontainer grey

ABS x

0402 Used ground pangrey

ABS

0404 Used ground panshield

ABS

0405 cup grille inox ENA High-grade steel

0406 Drain pan grey ABS

Page 10 / 20

PartsG

uru.co

m





Edition: 25/02/10

(5) Printed power citcuit and logic

Page 11 / 20

PartsG

uru.co

m


Edition: 25/02/10


0513 Rotarybox cpl Electronic

0514 Bracket ABS

0515 Power pcb ENA120V

Electronic x

0515 Electronic boxassembled

Electronic x

0517 Incoming feeder swRoHS

Copper / Gum

0518 Transformer 230V Electro x

0518 Transformer 120V Electro x

0519 Interferenceeliminator

Electro

Page 12 / 20

PartsG

uru.co

m





Edition: 25/02/10

(6) Fluid system

Page 13 / 20

PartsG

uru.co

m


Edition: 25/02/10


0605 Pump carrier NBR

0609 Bracket ABS

0612 Pump 110-120V/60Hz

Electro x

0612 Pump230V/50Hz/60W

Electro x

0618 Drain motor Electro

Page 14 / 20

PartsG

uru.co

mFor parts, repairs & technical support, contact:




Edition: 25/02/10

(7) Heater

Page 15 / 20

PartsG

uru.co

m


Edition: 25/02/10


0706 Lid TB2003 PA

0709 Thermoblock sold.nipple 120V

AL / High-gradesteel

x

0709 T-Block sold. nipp.230V/1400W

AL / High-gradesteel

x

0710 Support TB2003 V3 PA

Page 16 / 20

PartsG

uru.co





Edition: 25/02/10

(8) Grinder

Page 17 / 20

PartsG

uru.co

m


Edition: 25/02/10


0801 Bean container lid SMMA / SAN

0802 Adjustment ring ABS

0803 Suspension PA

0806 Bean container PP

0810 Powder funnel ABS

0813 Grinder unit 230V"choke"

Elektro / ABS / POM/ PA / NBR / Steel /Messing

x

0813 Grinder unit F 120V Elektro / ABS / POM/ PA / NBR / Steel /Messing

x

0815 Funnel black V2 ABS

0816 Funnel PP

0823 Grinder support PC

Page 18 / 20

PartsG

uru.co

m





Edition: 25/02/10

(9) Brew unit

Page 19 / 20

PartsG

uru.co

m


Edition: 25/02/10


0901 Brew unitassembled

PA / POM / NBR /Silicone / Steel

0907 Guide assembledquiet

AL / POM

0908 Plate AL

0912 Geared motor Electro / Messing /POM

Page 20 / 20

PartsG

uru.co




Jura ENA series – Brew Group Replacement Instructions

Disclaimer: Services Unlimited Inc./Parts Guru, under any circumstances, is not liable for any physical

or personal damages caused due to errors made while performing the outlined instructions.

Please ensure to unplug the machine from electrical outlet before opening the machine. Place the

machine on a dry surface away from electrical equipment and water.

Jura ENA Brew Group Replacement

Page 1 of 14

PartsG

uru.co

m




Services Unlimited, Inc./ Parts Guru 209 Walnut street, Lansdale, PA 19446


We see extensive Calcium deposits in almost every espresso machine we open for repairs.

Filter cartridges are preventative, expensive & ineffective as descaler

The Brita filter installed on the kitchen faucet works better than expensive Jura filters. Calcium sediment inside the machine causes the following problems

(1) reduces flow of water with full or partial clogging. (2) generate back pressure in the Hydraulic system & cause internal leaks.

(3) reduce pump pressure, reduce flow of coffee & water for coffee collects in drain tray instead (4) Error codes "Fill water" or Ventilate will display & force expensive repairs.

Descaling is best done manually, every two or three months. Order Best descaler (#DSC-6) from our online store for effective & authentic descaling.

We recommend Saeco's Royal One Touch 120VSuper automatic home espresso machine.

1- Convenient to operate, 2- Easy to maintain,

3- Easy access to remove Brew group, & 4-Easy to program drinks of choice Espresso Ristretto, Lungo, Americana, Macchiato,

Cappuccino, at the push of a button. After purchase service & parts are available in every State in USA.

As Good As it Gets Order one or Trade-in your old & expensive to repair Jura, Breville, Gaggia machines

It is worth it.

Have questions? E-mail inquiries. [email protected]

Having problems steaming Milk hot with Jura fothers?Use Milk flow restrictor (part #26151) to steam Milk Hotter

Eliminate expensive Jura Milk Carafe. Avoid frequent refilling, intense cleaning & change of rubber connectors. Use Milk bottle with flow restrictor with 15" Silicone tube Order part # 26151-S15

The restrictor is not good for every frothers that pull Milk from a container. Milk flow restrictor is not good for Older Jura models & straight frothers.

Having problem making Hot Espresso? 160F or less??

It is a design flaw in most Jura machines.Are you heating up Jura coffee in a Microwave?

Why own an expensive machine, to make cold Espresso? Really.

Try our New Espresso maker for better tasting & Hotter Espresso

Full refund if not satisfied. Extended 3-year warranty with Beans package.New machine at affordable price that every coffee lover can afford.

http://shop.partsguru.com/DSC-6x2-Gurus-Choice-Best-Descaler-Economy-pack-DSC-6x2.htm

http://shop.partsguru.com/searchquick-submit.sc?keywords=26151-S15

http://shop.partsguru.com/Milk-flow-Restrictor-for-steaming-milk-hotter-26151.htm

http://shop.partsguru.com/Royal-One-Touch-Superautomatic-Cappuccino-machine-115V-HD8930.htm

http://www.shop.partsguru.com/Gamea-Revo-fully-automatic-Compact-Espresso-maker-120V-Gamea-Revo.htm

1. Completely remove the water tank, and the drip tray from the machine


Page 2 of 14

PartsG

uru.co

m




2. Turn the Jura logo on the back of the machine counterclockwise until it pops off. This could be

little tricky. You may need to wiggle it slightly to get it out.


Page 3 of 14

PartsG

uru.co

m




3. Remove the oval head screw using the oval head bit. Gently turn the oval head screw

counterclockwise


Page 4 of 14

PartsG

uru.co

m




4. Once the oval head screw is removed, slight move up the round screw plate inside the machine.

The side casing of the machine should loosen up.

5. Using the Torx screw driver, remove the two screws from the top rear of the machine.


Page 5 of 14

PartsG

uru.co

m

6. Use the oval head screw driver to remove the oval head screw from the front of the machine.

7. Slightly pull out the oval head screw retaining piece. Please note that it should get loose as soon

as you remove the oval head screw.


Page 6 of 14

PartsG

uru.co

m

8. Pull down the retaining piece, as indicated in the picture above.

9. Use a flat head screw driver, carefully pull down the frame about 1/2" an inch.


Page 7 of 14

PartsG

uru.co

m

10. Pull both tabs down ½” inch.

11. To remove the side casing, slide the casing backward and out until its completely removed.


Page 8 of 14

PartsG

uru.co

m




12. Slide out the casing backward from the boiler side. Caution: the boiler side tends to be warmer

if the machine was recently used. Please exercise caution.

13. View of the brew group side after the casing is removed.


Page 9 of 14

PartsG

uru.co

m

14. Remove the silicone coffee dispensing tube from the brew group

15. Remove the three torx screws using the Torx 12 screw driver. Rotate the screws

counterclockwise gently.


Page 10 of 14

PartsG

uru.co

m

16. Remove the brew group. Perform necessary maintenance such as sanitizing and cleaning the

brew group drainage valve, replacing the o-rings, and lubricating the brew group piston.


Page 11 of 14

PartsG

uru.co

m




17. Internal view of ENA after removing the brew group


Page 12 of 14

PartsG

uru.co

m

18. Insert the new or refurbished brew group

19. Replace the three torx screws by turning them clockwise. Tighten them firmly.

20. Ensure all three torx screws are firmly screwed in.


Page 13 of 14

PartsG

uru.co

m

21. Re-connect the coffee dispensing silicone tube to the brew group outlet.

22. Ensure silicone tube is firmly re-connected. Re-install the side casings and close the machine.


Page 14 of 14

PartsG

uru.co

m

partsguru - capresso · 13379 ena 5 espresso brown ch [sev] 13380 ena 5 espresso brown eu vg...

Documents