paul abbott solid edge drafting - majenta plm ltd · restricted © siemens ag 2014 solid edge...
TRANSCRIPT
Restricted © Siemens AG 2014
SOLID EDGE UNIVERSITY UK 2015
Design Without Boundaries #SEU15UK
Solid Edge University UK 2015
July 8th, Silverstone UTC
Solid Edge Drafting
Paul Abbott
2014-05-13
Restricted © Siemens AG 2014
Page 3 Siemens PLM Software
#SEU15UK
Agenda
• Quick Look Topics
• Dimension and Annotation Usability -
Dimension
• Dimension and Annotation Usability -
Annotation
• Format Code UI Improvements
• Parts List From Selected Assembly
• Property/Reference Text Support in
Text Box
• Thread Dimension Retrieval
Enhancements
• Drawing Sheet Compare
2014-05-13
Restricted © Siemens AG 2014
Page 4 Siemens PLM Software
#SEU15UK
Agenda
• Best of the Rest
• Custom Material Properties Support
in Draft
• Reference Text in Additional
Annotations
• Technical Requirements Text
• C-Diameter Alignment
• Hole Callout Improvements
• Reference Part Display Control
• Optional Not Display Drawing View
Out-of-date
• Table Text Margin Control
• Free 2D Drafting license
• Scaled Nailboards
• Solid Edge Hints and Tips
• Some commonly asked questions -
answered
Restricted © Siemens AG 2014
SOLID EDGE UNIVERSITY UK 2015
Design Without Boundaries #SEU15UK
Solid Edge University UK 2015
July 8th, Silverstone UTC
Quick Look Topics
2014-05-13
Restricted © Siemens AG 2014
Page 6 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Dimensions
• Dimension Usability has been improved in ST8 with the handle points on
screen to make the following Dimensions more consistence and easier to
modified without going into properties of each Dimension.
• Connect Handles
• Modify Handles
• Dimension Text Handles
• Break Line Handles
• Shared Connect Point
• Text Position Snap to Center
• Jog Snap Position
• Selected Dimension Display with Hidden or Modified Components
• Extension Line along Projection Line
• Terminator Handle
2014-05-13
Restricted © Siemens AG 2014
Page 7 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Dimensions
• Handle colors have been added (Solid Edge Options) to help understand the
different types of handles such as connect handles or modify handles.
• Connect Handle – This is the handle at which the annotation is connected to
another object.
• Modify Handles – These are the handles that can be dragged to manipulate
the annotation display.
• Terminator Handle – This is the handle to bring up the terminator dialog box.
2014-05-13
Restricted © Siemens AG 2014
Page 11 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions
• Break line dimensions display a modify handle at the text end of the break line.
• This handle is used to change the length of the break line.
2014-05-13
Restricted © Siemens AG 2014
Page 12 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions
• Chain and Stacked Dimensions
• Shared connect point handles will only display one modify handle for both
dimensions.
• If the modify handle is moved it will move both extension lines at the same
time. (“Shift+Drag” will move only the highlighted modify connection point.)
2014-05-13
Restricted © Siemens AG 2014
Page 14 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions
• Text Position Snap
• A new indicator has been added to display the midpoint on a dimension line.
2014-05-13
Restricted © Siemens AG 2014
Page 15 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions
• Jog Snap Position
• A snap line indicator is displayed to show where the jog line will snap to
remove the jog.
• This does not change the jog behavior. It is just displaying feedback to
where the jog is removed.
2014-05-13
Restricted © Siemens AG 2014
Page 16 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions*
• Selected Dimension Display with Hidden or Modified Components.
• Projection lines and Dimension lines can now be hidden with a left mouse
click on the Terminator Handle.
2014-05-13
Restricted © Siemens AG 2014
Page 18 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions
• Extension Line along Projection Line
• When an Projection line is shorten, a dashed line is visible to display where
the connection point for that dimension is located.
2014-05-13
Restricted © Siemens AG 2014
Page 19 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions
• Terminator Handle
• To change the appearance of the Terminator, user can left mouse click the
Terminator handle to bring up a shortcut menu and then select the
Terminator type.
2014-05-13
Restricted © Siemens AG 2014
Page 20 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Dimensions*
• Radial, Diameter, Angular, Coordinate, Angular Coordinate, Symmetric
Diameter and Chamfer dimensions all have the same type of handles and
functionality as the above slides.
DEMO-1
2014-05-13
Restricted © Siemens AG 2014
Page 21 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Annotations*
• Annotation Usability has been improved in ST8 with the handle points on
screen to make the following annotations more consistence and easier to
modify without going into properties of each annotation.
• Balloons
• Callouts
• Datum Frame
• Weld Symbol
• Datum Target
• Surface Texture Symbol
• Feature Control Frame
• Leader
• Centerline
• Cutting Plane Line
• Auxiliary View Plane Line
• Detail View
2014-05-13
Restricted © Siemens AG 2014
Page 24 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Annotations
• Connect Handle
• Dragging the connect handle will move the connection point of the
annotation.
• Alt+Drag breaks the connection point
2014-05-13
Restricted © Siemens AG 2014
Page 27 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Annotations
• New to ST8 is the display of a Leader Snap tool.
• Past releases Solid Edge would only snap to 0,90,180,270 degrees. ST8 now
snaps to 45 degree increments 45,135,225,315 degrees in addition to the
above.
• Leader snap tool
2014-05-13
Restricted © Siemens AG 2014
Page 28 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Annotations
• If the leader has a break line plus a jog inserted.
• Start dragging the jog will display multiple leader snap tools.
2014-05-13
Restricted © Siemens AG 2014
Page 30 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Annotations
• Surface Texture
• This handle changes the length of the line.
2014-05-13
Restricted © Siemens AG 2014
Page 31 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Annotations
• Weld Symbol
• This handle flips the symbol direction.
2014-05-13
Restricted © Siemens AG 2014
Page 33 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Annotations*
• Datum Frame
• Left click Terminator handle will bring up Anchor options.
2014-05-13
Restricted © Siemens AG 2014
Page 34 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Annotations*
• Centerline
2014-05-13
Restricted © Siemens AG 2014
Page 35 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability –
Annotations*
• Cutting Plane Line
• Right mouse click this handle will give the user the option to flip the
annotation.
2014-05-13
Restricted © Siemens AG 2014
Page 36 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Annotations
• Auxiliary View
2014-05-13
Restricted © Siemens AG 2014
Page 38 Siemens PLM Software
#SEU15UK
Dimension and Annotation Usability -
Annotations
• Detail View
DEMO-2
2014-05-13
Restricted © Siemens AG 2014
Page 39 Siemens PLM Software
#SEU15UK
Format Code UI Improvements
• Remember having to type the Format Codes for your reference/property text
and user must know the proper syntax?
• A new user interface makes it easier to modify the Format code values of
reference text and property text.
• You can use the new Format Values dialog box to insert format codes directly
into the property text
and reference text
strings.
• Available in Draft,
Ordered Sketch,
PMI
2014-05-13
Restricted © Siemens AG 2014
Page 40 Siemens PLM Software
#SEU15UK
Format Code UI Improvements*
• Format Code dialog can be found in the Properties or the Modify Styles for the
following:
• Text box
• Dimension
• Callouts
• Balloons
• Drawing View captions
• View Annotation caption
• Part list and Table titles
• Part list and Table data columns
• Block labels
• For annotations that are not listed above (such as feature control frames,
datum frames, datum targets, weld symbols, and surface texture symbols) you
can apply formatting to the property text values by typing the format codes
using the proper syntax.
2014-05-13
Restricted © Siemens AG 2014
Page 41 Siemens PLM Software
#SEU15UK
Format Code UI Improvements
Input value – this is the selected property
Tolerance – Add a upper/lower tolerance
to the dimension
Units – Turn of the display units on the dimension
Units – Display Dual units for that dimension
2014-05-13
Restricted © Siemens AG 2014
Page 42 Siemens PLM Software
#SEU15UK
Format Code UI Improvements
Text
• Round-off – number of decimal places to
display.
• Date-time – only if associated to the property
then it can be displayed and format chosen.
• Text case – Upper/Lower case text.
2014-05-13
Restricted © Siemens AG 2014
Page 43 Siemens PLM Software
#SEU15UK
Format Code UI Improvements
Output value – Displays the syntax of the final output.
2014-05-13
Restricted © Siemens AG 2014
Page 44 Siemens PLM Software
#SEU15UK
Format Code UI Improvements
• Callout text has to be selected before the Format button is available.
• Selected text displays red
2014-05-13
Restricted © Siemens AG 2014
Page 45 Siemens PLM Software
#SEU15UK
Format Code UI Improvements
• Dual Units on primary dimension
• Rounding
• No Units
• Date/Time
• Date Time
• Tolerance
DEMO-3
2014-05-13
Restricted © Siemens AG 2014
Page 48 Siemens PLM Software
#SEU15UK
Parts List From Selected Assembly
• Now you can create a parts list based on a selected subassembly in context
of a top level assembly.
• Part numbers and item
balloons are based
solely on the
subassembly.
2014-05-13
Restricted © Siemens AG 2014
Page 49 Siemens PLM Software
#SEU15UK
Parts List From Selected Assembly
• A new option has been added to the Parts List command bar, “From Selected
Subassembly”.
• Once selected the “Select Subassembly
dialog box is displayed.
2014-05-13
Restricted © Siemens AG 2014
Page 50 Siemens PLM Software
#SEU15UK
Parts List From Selected Assembly
• In order to use the “From Selected Subassembly” the user must first deselect
the “Link to Active” command.
Selected
Deselected
• Then select the subassembly view and the “From Selected Subassembly” is
available.
2014-05-13
Restricted © Siemens AG 2014
Page 51 Siemens PLM Software
#SEU15UK
Parts List From Selected Assembly
• If there is not Parts List present and a subassembly is selected the “From
Selected Subassembly” command becomes active.
Before selecting the subassembly
After selecting the subassembly
DEMO-4
2014-05-13
Restricted © Siemens AG 2014
Page 52 Siemens PLM Software
#SEU15UK
Property/Reference Text Support in Text
Box
• Text Box command now supports property text and reference text.
• When creating a Text Box a new command called Insert Property Text has
been added to the Text Box quick access ribbon bar.
2014-05-13
Restricted © Siemens AG 2014
Page 53 Siemens PLM Software
#SEU15UK
Property/Reference Text Support in Text
Box
• Text Box has to be drawn on the sheet before the option is available.
• 2 options
• Property Text
• Reference Text
2014-05-13
Restricted © Siemens AG 2014
Page 54 Siemens PLM Software
#SEU15UK
Property/Reference Text Support in Text
Box
• Property Text option will link text in the Text Box to any selected property from
the selection.
2014-05-13
Restricted © Siemens AG 2014
Page 55 Siemens PLM Software
#SEU15UK
Property/Reference Text Support in Text
Box
• Reference Text option will link text in the Text Box to any selected reference
source locate on any sheet of the drawing.
2014-05-13
Restricted © Siemens AG 2014
Page 56 Siemens PLM Software
#SEU15UK
Property/Reference Text Support in Text
Box
• Using the command
• Start the Text Box command.
• Click in the drawing and place the text box.
• Insert Property Text option.
• Select either the Property Text or Reference text.
• This will link that Property or Reference select inside the Note.
2014-05-13
Restricted © Siemens AG 2014
Page 57 Siemens PLM Software
#SEU15UK
Property/Reference Text Support in Text
Box*
• Property code text can be displayed by Right Mouse clicking the Text Box.
2014-05-13
Restricted © Siemens AG 2014
Page 58 Siemens PLM Software
#SEU15UK
Thread Dimension Retrieval Enhancements
• In previous releases of Solid Edge the hole callout dimensions for threaded
holes would always dimension to the drill hole size and ignore the major
diameter.
• ST8 now has the ability to dimension to the major diameter per dimension
standards.
Previous releases ST8
2014-05-13
Restricted © Siemens AG 2014
Page 59 Siemens PLM Software
#SEU15UK
Thread Dimension Retrieval Enhancements*
• Section cutout support dimensioning to the major diameter for both Callouts
and Linear dimensions.
• Legacy drawings do not update to move a dimension from the tap drill
geometry to the major diameter.
DEMO-5
2014-05-13
Restricted © Siemens AG 2014
Page 60 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare
• Solid Edge ST8 has a new Drawing Sheet Compare command.
• Compare Drawing command only compares pixel changes in each drawing.
• Compare Drawing command is located under the applications button.
• Support for Solid Edge “.dft” file types only.
• Draft files open inactive/read-only and open in Solid Edge in the background.
2014-05-13
Restricted © Siemens AG 2014
Page 61 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare*
• Open Existing Comparison –
Saved “.bmp bitmap” files of
compared drawings.
• Solid Edge “.dft” files to compare.
Must select 2 files.
• Sheet selection of each drawing
2014-05-13
Restricted © Siemens AG 2014
Page 62 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare
• Compares the 2 drawings
selected
• Once drawings are compared, the
compared drawings can be saved
as a bitmap file.
2014-05-13
Restricted © Siemens AG 2014
Page 63 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare*
• Information to display in the
viewport windows. 5 different
options
• View colors for each file.
• Sheet background color
2014-05-13
Restricted © Siemens AG 2014
Page 64 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare*
• Zoom Area
• Fit
• Pan
• Zoom
2014-05-13
Restricted © Siemens AG 2014
Page 65 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare
• Differences in the
2 drawings
• File 1
• File 2
• File information
2014-05-13
Restricted © Siemens AG 2014
Page 66 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare*
• When comparing drawings the user can choose which sheet of a multi-sheet
drawing to compare.
• If the sheets are different sizes from file 1 to file 2 the Compare drawing
command will give the following error.
2014-05-13
Restricted © Siemens AG 2014
Page 67 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare*
• Saving the compared results
• When saving the compared the only save as option is “.bmp”.
• 3 files are save with the save as
• [Name Input from User]_Differences
• [Name Input from User]_Original
• [Name Input from User]_New
• This only saves the 2 sheets currently being compared; no other sheets are
saved if it’s a multi-sheet drawing.
2014-05-13
Restricted © Siemens AG 2014
Page 68 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare
• Open Comparison bitmap file
• The only option for opening the comparison file is [Name Input from
User]_Differences.
DEMO-6
2014-05-13
Restricted © Siemens AG 2014
Page 69 Siemens PLM Software
#SEU15UK
Drawing Sheet Compare – Managed*
• Solid Edge for Sharepoint and Insight support the new Compare Drawing tool.
• SESP
• Click Manage under the Applications button and choose SESP before you
can open the Drawing Compare tool.
• Insight
• User will be able to navigate to the network location as if it were a location on
their local machine.
• When saving a comparison file, the file needs to be saved locally, saving to
managed locations will be unavailable.
• Opening a comparison file will also be limited to only local files.
• Opening drawing files from Team Center is not supported.
Restricted © Siemens AG 2014
SOLID EDGE UNIVERSITY UK 2015
Design Without Boundaries #SEU15UK
Solid Edge University UK 2015
July 8th, Silverstone UTC
Best of the Rest
Realize innovation.
2014-05-13
Restricted © Siemens AG 2014
Page 71 Siemens PLM Software
#SEU15UK
Custom Material Properties Support in Draft
• ST7 Custom Material Properties had been added to part modeling. In the draft
file Solid Edge could not extract any custom property in callouts.
• ST8 now has the ability to use any type of Custom Material Property in callouts
when using property text.
2014-05-13
Restricted © Siemens AG 2014
Page 72 Siemens PLM Software
#SEU15UK
Custom Material Properties Support in Draft
• In the draft file when placing a callout
using a Custom Material Property
the user has to use the property text
command and From graphic
connection to link the property.
2014-05-13
Restricted © Siemens AG 2014
Page 73 Siemens PLM Software
#SEU15UK
Custom Material Properties Support in Draft
• The Custom Material Properties can also be extracted in the Parts List.
DEMO-7
2014-05-13
Restricted © Siemens AG 2014
Page 74 Siemens PLM Software
#SEU15UK
Reference Text in Additional Annotations
• Reference text functionality began in ST7. With ST8 the Reference text has
been expanded into the following areas:
• Cutting Plane
• Auxiliary View Plane
• Detail Envelope
• GOST Weld Symbol
2014-05-13
Restricted © Siemens AG 2014
Page 75 Siemens PLM Software
#SEU15UK
Reference Text in Additional Annotations
• Cutting Plane
• Cutting Plane annotations can now be selected from within the Callout
command once the user goes into the Reference text command.
2014-05-13
Restricted © Siemens AG 2014
Page 76 Siemens PLM Software
#SEU15UK
Reference Text in Additional Annotations
• Auxiliary View Plane
• Auxiliary View Plane annotations can now be selected from within the
Callout command once the user goes into the Reference text command.
2014-05-13
Restricted © Siemens AG 2014
Page 77 Siemens PLM Software
#SEU15UK
Reference Text in Additional Annotations
• Detail Envelope
• Detail Envelope annotations can now be selected from within the Callout
command once the user goes into the Reference text command.
2014-05-13
Restricted © Siemens AG 2014
Page 80 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• New command in ST8 is Technical Requirements.
• Technical Requirement command creates a text box
to capture mechanical information about the drawing
with a numbered list.
2014-05-13
Restricted © Siemens AG 2014
Page 81 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• Once in the command, the command ribbon bar is displayed.
• Text scale, Properties and Text Control can be changed
from the ribbon.
• ONLY one Technical Requirement Text box instance allowed on each draft
working sheet.
• If there is already a technical requirement text box instance, then clicking the
text box will bring up the ribbon bar.
2014-05-13
Restricted © Siemens AG 2014
Page 82 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• Shortcut command are provided for technical requirements.
• Cut/Copy command is disabled simply because there is no support for
multiple technical requirement on the same draft sheet.
2014-05-13
Restricted © Siemens AG 2014
Page 83 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• How it works.
Enter the note here
Press the Insert button
Note with number callout is
displayed
2014-05-13
Restricted © Siemens AG 2014
Page 84 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• How it works.
Save settings – works the
same as any other Save
settings location.
Reference - works the
same as Reference in
other locations
Style – Select the style for
the number callout and what
type of format to display.
2014-05-13
Restricted © Siemens AG 2014
Page 85 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• How it works.
Change the order of the
notes
2014-05-13
Restricted © Siemens AG 2014
Page 86 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• Location Tab
Anchor corner – options for
locating the text box.
Position – use an “X – Y”
origin location to place text
box.
2014-05-13
Restricted © Siemens AG 2014
Page 87 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• Text Format Tab
Font control options
Text Control – options to
control the fit of the text
inside the text box.
2014-05-13
Restricted © Siemens AG 2014
Page 88 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• Title Tab
Title text – Adds a title to the
text box.
Reference controls that can
be used in the title.
Font and Font Styles
Justification
2014-05-13
Restricted © Siemens AG 2014
Page 89 Siemens PLM Software
#SEU15UK
Technical Requirements Text
• Indents and Spacing Tab
Indentation – indents the text
from the left side of the text
box. Special options for
Indentation.
Spacing – controls the
spacing between each line of
text.
DEMO-8
2014-05-13
Restricted © Siemens AG 2014
Page 90 Siemens PLM Software
#SEU15UK
C-Diameter Alignment
• In previous releases of Solid Edge, Smart Dimensions would place “C-
Diameter dimensions (Concentric Diameter). This command had no way to
automatically stack, align, group and space dimensions.
• New to ST8 is an option in the command ribbon bar called “Concentric
Diameter” when using the Smart Dimension command.
2014-05-13
Restricted © Siemens AG 2014
Page 91 Siemens PLM Software
#SEU15UK
C-Diameter Alignment
• Concentric Diameter automatically stacks, aligns, groups and spaces
dimensions.
• After the first dimension is placed all of the other C-Diameter dimensions only
require a single click to select the diameter. The placement is automatic.
• When using the C-Diameter command all dimensions are forced to be linear.
2014-05-13
Restricted © Siemens AG 2014
Page 92 Siemens PLM Software
#SEU15UK
C-Diameter Alignment
• Concentric Diameter dimensions can not be stack, align, grouped or spaced
with any other dimensions.
• Alt+drag will break the alignment group of the selected dimension.
• C-Diameter alignment groups work like all alignment groups in Solid Edge.
2014-05-13
Restricted © Siemens AG 2014
Page 93 Siemens PLM Software
#SEU15UK
C-Diameter Alignment
• Dimension Styles has an option on the “Lines and Coordinate” tab to
Alternate text position.
DEMO-9
2014-05-13
Restricted © Siemens AG 2014
Page 94 Siemens PLM Software
#SEU15UK
Hole Callout Improvements
• This is an addition to the Format codes for Hole Callouts.
• The following codes have been added to the Format code list under Symbols
and Values, Values, Feature References.
• Taper Ratio and Taper Angle
• V-Bottom Angle
• Thread
• Tap drill diameter
• Internal minor diameter
• Nominal diameter
2014-05-13
Restricted © Siemens AG 2014
Page 98 Siemens PLM Software
#SEU15UK
Hole Callout Improvements
• Underline Text
• An option has been added to Underline Text in callouts.
• GB standard now supports
Underline Text
2014-05-13
Restricted © Siemens AG 2014
Page 99 Siemens PLM Software
#SEU15UK
Reference Part Display Control
• New option has been added to Solid Edge option to control the default
appearance of Reference parts in a drawing.
2014-05-13
Restricted © Siemens AG 2014
Page 100 Siemens PLM Software
#SEU15UK
Reference Part Display Control
• Default setting for reference parts display are set to on.
2014-05-13
Restricted © Siemens AG 2014
Page 101 Siemens PLM Software
#SEU15UK
Reference Part Display Control
• With all the default setting, reference parts come into a drawing view
transparent.
2014-05-13
Restricted © Siemens AG 2014
Page 102 Siemens PLM Software
#SEU15UK
Reference Part Display Control
• With this option turned off all reference parts will come into the drawing view
solid.
2014-05-13
Restricted © Siemens AG 2014
Page 103 Siemens PLM Software
#SEU15UK
Reference Part Display Control
• User still has control over the display of reference parts by going into view
properties and selecting the Display tab and the Model options tab.
2014-05-13
Restricted © Siemens AG 2014
Page 104 Siemens PLM Software
#SEU15UK
Optional Not Display Drawing View Out-of-
date
• When drawing views are out-of-date and Draft file is opened, there is a dialog
displayed stating this. A check box on the dialog to 'Do not show this again."
• Out-of-date drawing views already have the gray box, corners, etc. to
indicate that they are Out-of-date.
2014-05-13
Restricted © Siemens AG 2014
Page 105 Siemens PLM Software
#SEU15UK
Table Text Margin Control
• Previously table cell text margins were controlled by a single value for both
horizontal/vertical margins.
• ST8 there’s now independent
control for both horizontal and
vertical.
2014-05-13
Restricted © Siemens AG 2014
Page 106 Siemens PLM Software
#SEU15UK
Free 2D Drafting license
• The free 2D drafting license is now a permanent license as of ST8 instead of
a timed license.
2014-05-13
Restricted © Siemens AG 2014
Page 107 Siemens PLM Software
#SEU15UK
Scaled Nailboards
• Previously in Nailboard drawings all views came in at a scale of 1 : 1.
• ST8 now has options to control view scale.
Restricted © Siemens AG 2014
SOLID EDGE UNIVERSITY UK 2015
Design Without Boundaries #SEU15UK
Solid Edge University UK 2015
July 8th, Silverstone UTC
Solid Edge Hints and tips
Realize innovation.
2014-05-13
Restricted © Siemens AG 2014
Page 109 Siemens PLM Software
#SEU15UK
• Where do I find lists of the default shortcut keys for each Solid Edge
environment?
Solid Edge Hints and Tips
2014-05-13
Restricted © Siemens AG 2014
Page 110 Siemens PLM Software
#SEU15UK
• Open a Part
• Customize the Command Ribbon
• Select the environment
• Select the keyboard tab
• Change "Choose commands from:"
to "All Keyboard Assignments"
Solid Edge Hints and Tips
2014-05-13
Restricted © Siemens AG 2014
Page 111 Siemens PLM Software
#SEU15UK
• Note that you can print out the keyboard assignments
for each environment
Solid Edge Hints and Tips
2014-05-13
Restricted © Siemens AG 2014
Page 112 Siemens PLM Software
#SEU15UK
• With the popular use of dual monitors while in the office, have you ever had a
"missing" dialog box when you working remote on your laptop just using a
single screen?
• The dialog is most likely being displayed on the second monitor.
• To fix this delete the following registry key to restore normal functionality:
HKEY_CURRENT_USER\Software\Unigraphics Solutions\Solid Edge\Version
108\OpenAndSaveDisplaySettings
Solid Edge Hints and Tips
2014-05-13
Restricted © Siemens AG 2014
Page 113 Siemens PLM Software
#SEU15UK
• Do you know how to make cross-hatching look the same zoomed in as it looks
when zoomed to fit?
• Make the hatch not resize dynamically while zooming in
Solid Edge Hints and Tips
2014-05-13
Restricted © Siemens AG 2014
Page 114 Siemens PLM Software
#SEU15UK
• If you set Solid Edge Options > View tab >
Display as printed, then it won't change as
you zoom in and out
Solid Edge Hints and Tips
2014-05-13
Restricted © Siemens AG 2014
Page 115 Siemens PLM Software
#SEU15UK
Solid Edge Hints and Tips
• Force drawing views that are showing up-to-date to recompute by holding
down CTRL+SHIFT and clicking on Update Views
• In some special cases a change may not put drawing views out-of-date
and so simply clicking ‘Update Views’ would not recompute the
drawing view
2014-05-13
Restricted © Siemens AG 2014
Page 116 Siemens PLM Software
#SEU15UK
Solid Edge Hints and Tips
• When placing a dimension using the default Automatic option and the
dimension type is Horizontal/Vertical, you have the option to use the ‘Shift’ key
to switch the option to “by 2 points” before placing the dimension.
• When placing a dimension using the default Automatic option and the
dimension type is not an obvious Horizontal/Vertical, you have the option to
use the ‘Shift’ key to switch the option to “Horizontal/Vertical” before placing the
dimension.
2014-05-13
Restricted © Siemens AG 2014
Page 117 Siemens PLM Software
#SEU15UK
Solid Edge Hints and Tips
DEMO-10
2014-05-13
Restricted © Siemens AG 2014
Page 118 Siemens PLM Software
#SEU15UK
Summary
• Siemens Realise 2D Drafting is still the currency of The Drawing Office and
as such each release
2014-05-13
Restricted © Siemens AG 2014
Page 119 Siemens PLM Software
#SEU15UK
Questions?
Name Paul Abbott
Siemens Technical Consultant
Phone:
07989 549463
Email: