pdf ...duration of study the study of mechatronic engineering program lasts 4 years in all and is...
TRANSCRIPT
1 …………………………………………1
2 ………………………………………………4
3 ………………………………………8
4 ……………………………………………12
5 ……………………………………15
6 ……………………………………………18
7 1+3 ………………………………………21
8 …………………………………24
9 ……………………………………………27
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of Study The study of mechatronic engineering program lasts 4 years in all and is composed of two periods. The first
period of teaching and the last six months is for the students’ practice.
Total credits: 130
The Key Courses The key courses which will be instructed in the first period of 3.5 years include:
Engineering graphics Mechanics of materials
Mechanical principles Mechanical design
Electrical and electronics Fundamental of mechanical manufacturing technology
Measurement techniques of mechanical engineering Control fundamental of mechanical engineering
Microcomputer principle and application Mechanical equipment electrical control
Hydraulic and pneumatic transmission Mechanical and electrical transmission control
CNC technology Products design of mechatronic technology
ObjectivesThe major trains foreign students to become the future qualified engineers in the field of mechatronic
engineering and technology. By study, students can master the fundamental theories and basic techniques of mechanical design, manufacturing and electrical control; eligible to analyze, design and develop mechanical and electrical machinery; eligible to use, operate and maintain electromechanical equipments; eligible to operate and maintain computer-aided tools(such as CAD CAE and so on).
Requirements Abide by the relevant policies and decrees formulated by the Chinese government, and the rules and
regulations of Jiangsu University of Science and Technology JUST .Be in good health condition, study hard and have good moral character. Respect the teaching staff and Chinese traditions and customs. Develop scientific attitude in research and study and stress the combination of theory and practice. Have a
good command of basic theories and systematic knowledge in the field of mechtronic engineering. Be able to read Chinese literature in the field of mechtronic engineering.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
1 2 3 4 5 6 7 8
Introduction of China 3 48 48 3
-1 Chinese-1 4 64 64 4
-2 Chinese-2 4 64 64 4
-3 Chinese-3 3 48 48 3
-4 Chinese-4 3 48 48 3
Basic a -1 AdvancedMathematics-1 4 64 64 4
general a -2 AdvancedMathematics-2 4 64 64 4
courses b Linear Algebra 2 32 32 2a -1 University physics-1 3.5 56 40 16 3.5
a -2 University physics-2 3.5 56 40 16 3.5
b ComputerFundamentals 1.5 24 16 8 1.5
bVc++
Computer programmingVc++
3 48 32 16 3
38.5 616 560 32 24 11 13 8.5 6
a -1 Engineeringgraphics-1 3 48 40 8 3
b -2 Engineeringgraphics-2 4 64 28 20 16 4
a Theoretical mechanics 3 48 48 3
a Mechanics oft i l
4 64 58 6 4
Basic a Electrical andelectronics 4.5 72 62 10 4.5
disciplinar a Mechanical principles 4 64 58 6 4
courses a Mechanical design 4 64 56 8 4
b Engineering material and formingtechnology
2 32 26 6 2
b Basic
Technology of ExchangeabilityMeasurement
2 32 28 4 2
a Fundamental of mechanicalmanufacturing technology
3.5 56 48 8 3.5
b Control
Fundamental of MechanicalEngineering
3 48 42 6 3
b Measurement Techniques ofMechanical Engineering
2.5 40 34 6 2.5
39.5 632 528 60 20 24 3 4 7.5 10 13 2.5
b Microcomputer principle andapplication
2.5 40 32 8 2.5
a Hydraulic andpneumatic transmission 2.5 40 34 6 2.5
b CNC technology 2.5 40 34 6 2.5
Specializd b Mechanicalequipment electrical control 2.5 40 34 6 2.5
courses bCAD Three
dimensional CAD model anddrawing
2 32 16 16 2
a Mechanical andelectrical transmission control 2.5 40 34 6 2.5
b Interfacetechnology of microcomputer 2 32 26 6 2
b Productsdesign of mechatronic technology 2.5 40 34 6 2.5
b Industrial robot 2.5 40 34 6 2.5
b CNC system 2.5 40 34 6 2.5
24 384 312 56 16 12 12
Required
Required
Undergraduate Curriculum Schedule
Credit
Hours/Major /Mechatronic Engineering
Semesters & Credits
Total Lab.Work
Kind &Total
Credits IV yearNo. III yearLectures Computer
PracticePractical
Work
Subject I year II year
Required
Subtotal
Subtotal
Type
Subtotal
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
1 2 3 4 5 6 7 8
Undergraduate Curriculum Schedule
Credit
Hours/Major /Mechatronic Engineering
Semesters & Credits
Total Lab.Work
Kind &Total
Credits IV yearNo. III yearLectures Computer
PracticePractical
Work
Subject I year II yearType
b Engineering graphics parts ofsurveying and mapping practice
1 1 Week 1
b -1 Engineeringbasic training-1 2 2 Weeks 2
Intership& b -2 Engineering
basic training-2 2 2 Weeks 2
practical b Comprehensive training ofmechanical design
2 2 Weeks 2
training b Fundamental of mechanicalmanufacture course exercise
1 1 Week 1
b Mechanical and electrical controlfoundation course design
2 2 Weeks 2
b Comprehensive course design 2 2 Weeks 2
b Professional 2 2 Weeks 2b Graduation project 14 14 Weeks 14
28 28 Weeks 1 2 2 3 2 4 14
130 14 18 18 18 16 17 16 14Total
Subtotal
Required
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe study of ME program lasts 4 years in all and is composed of two periods. The first period of teaching
and the last six months is for the students’ practice.
Total credits: 127
The Key CoursesThe key courses which will be instructed in the first period of 3.5 years include: Engineering Graphics Theoretical MechanicsMechanical Principles Mechanical DesignMechanical Design Measurement and Testing Technology of Mechanical
EngineeringElectrical and electronics Hydraulic and Pneumatic TransmissionFundamental of Mechanical Manufacture CNC technology
Microcomputer principle and application Mechanical equipment electrical control
Mechanical engineering control foundation Technology of Mechanical Manufacture
ObjectivesThe major trains enroll students to produce quality engineers of mechanical design and manufacturing and its
automation. By study, students can master the fundamental theories and basic techniques of mechanical design and manufacturing; eligible to analysis, design and develop machinery; eligible to use, develop and maintain mechanical equipment; eligible to operate and maintain computer-aided tools(such as CAD CAE CAM and so on).
Requirements Abide by the relevant policies and decrees formulated by the Chinese government, and the rules and
regulations of Jiangsu University of Science and Technology JUST . Be in good health condition, study hard and have good moral character. Respect the teaching staff and Chinese traditions and customs. Develop scientific attitude in research and study and stress the combination of theory and practice. Have a
good command of basic theories and systematic knowledge in the field of mechanical engineering. Be able to read Chinese literature in the field of mechanical engineering.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term CourseTotal Hours Credit Remarks
1
Introduction of China 48 3 Eng
-1 Advanced Mathematics-1 64 4 Math
-1 Chinese-1 64 4 Eng
Mechanical Technical Terms 48 3 Mech
1 Engineering graphics 1 48 3 Mech
272 17
Term CourseTotal Hours Credit Remarks
2
2 Advanced Mathematics 2 64 4 Math
-2 Chinese-2 64 4 Eng
2 Engineering graphics 2 64 2 Mech
University physics 80 5 Math1 Engineering basic training
12Weeks 2 Fact
Engineering graphics parts of surveying and mapping practice
1Weeks 1 Mech
272+3W 18
----------- Second year in the university ----
Term CourseTotal Hours Credit Remarks
3
Linear Algebra 32 2 Math
-3 Chinese-3 48 3 Eng
Theoretical mechanics 48 3 Nava
Electrical and electronics 64 4 ElecVc++ Computer programming
Vc++64 4 Com
2 Engineering basic training2
2Weeks 2 Fact
256+2W 18
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Term CourseTotal Hours Credit Remarks
4
-4 Chinese-4 48 3 Eng
Mechanics of materials 64 4 Nava
Mechanical principles 64 4 MechEngineering material
and forming technology 32 2 Mech
Introduction on mechanical engineering
32 2 Mech
240 15
----------- Third year in the university -------------
Term CourseTotal Hours Credit Remarks
5
Basic Technology of Exchangeability Measurement
32 2 Mech
Fundamental of Mechanical Manufacture
48 3 Mech
Microcomputer principle and application
32 2 Mech
Mechanical design 64 4 MechMechanical engineering
control foundation 32 2 Mech
Comprehensive training of mechanical design
2Weeks 2 Mech
Fundamental of Mechanical Manufacture Course Exercise
1Weeks 1 Mech
208+3W 16
Term CourseTotal Hours Credit Remarks
6
Measurement Techniques of Mechanic Engineering 32 2 Mech
Hydraulic and pneumatic transmission 32 2 Mech
CNC technology 32 2 MechMechanical equipment
electrical control32 2 Mech
Fundamental of thermo-technology
32 2 Mech
Mechanical and electrical control foundation course design
1Weeks 1 Mech
160+1W 11
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Fourth year in the university -------------
Term CourseTotal Hours Credit Remarks
7
Technology of Mechanical Manufacture
32 2 Mech
Intelligent manufacturing technology
32 2 Mech
CNC machining technology 32 2 MechAdvanced manufacturing
technology 32 2 Mech
CAE Application of CAE technology
32 2 Mech
CAD Three dimensional CAD model and drawing
32 2 Mech
The virtual prototype technology
32 2 Mech
Comprehensive training 3Weeks 3 Mech
224+3W 17
Term CourseTotal Hours Credit Remarks
Professional internship 3 weeks 3 Mech
Graduation project 14weeks 12 Mech
15
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe study of CS&T program lasts 4 years in all and is composed of two periods. The first period of teaching
and the last six months is for the students’ practice.
Total credits: 144
The Key CoursesThe key courses which will be instructed in the first period of 3.5 years include: Advanced Mathematics Heat TransferCollege Physics Fluid DynamicsEngineering Mechanics Chinese Electrical and Electronic Technology Computer BasisEngineering Graphics The Structure and Principle of Internal Combustion Mechanical Principle The Structure and Principle of Gas Turbine Mechanical Design New Energy Technology
Engineering Thermodynamics Marine Power Plant
ObjectivesThe international students in this discipline should grasp both solid theoretical foundation and
systematic specialized knowledge of power engineering, and obtain the ability on analyzing and solving problems independently. Besides, they should master the basic technologies such as experiment tests, data analysis and computer programming. After graduation, they can be engaged in teaching, scientific research, design, production and management etc. in the field of power engineering.
RequirementsAbide by the relevant policies and decrees formulated by the Chinese government, and the rules and
regulations of Jiangsu University of Science and Technology JUST . Be in good health condition, study hard and have good moral character. Respect the teaching staff and Chinese traditions and customs. Develop scientific attitude in research and study and stress the combination of theory and practice. Have a
good command of basic theories and systematic knowledge in the field of computer science. Be able to read Chinese literature in the field of energy and power engineering.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term CourseTotal Hours Credit School Remarks
1
Introduction of China 64 4 Eng
-1 Advanced Mathematics-1 64 4 Math
-1 Chinese-1 64 4 Eng
General Introduction of Energy and Power Engineering
32 2Power
-1 College Physics-1 48 3 Math
-1 Engineering Graphics-1 32 2 Mech
304 19
Term CourseTotal Hours Credit Remarks
2
2 Advanced Mathematics 2 64 4 Math
-2 Engineering Graphics-2 32 2 Mech
-2 Chinese-2 64 4 Eng
Computer Basis 32 2 Com
-2 College Physics-2 48 3 Math
C++ C++ Programming 48 3 Com
288 18
----------- Second year in the university ----
Term CourseTotal Hours Credit Remarks
3
Linear Algebra 32 2 Math
-3 Chinese-3 64 4 Eng
Professional English 32 2 Power
Engineering Mechanics 1 48 3 Naval
Electrical and Electronic Technology
64 4Com
Computer Aided Design (CAD)
32 2Power
Professional Cognition Practice
1w 1Power
288 18
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Term CourseTotal Hours Credit Remarks
4
-4 Chinese-4 64 4 Eng
CFD Application of CFD 32 2 Power Elective
Engineering Mechanics 2 48 3 NavalProbability and
Statistics 48 3 Math
Basis of Automatic Control 32 2 Power
Basic of Measure Technique 48 3 Power
Mechanical Principle 48 3 Mech
320 20 Power
- ---------- Third year in the university -------------
Term CourseTotal Hours Credit School Remarks
5
Construction of Diesel Engine and its Disassembly and Reassembly 2w 2 Power
Fluid Dynamics 48 3 Power
Mechanical Design 48 3 Mech
New Energy Technology 48 3 Power
Engineering Thermodynamics 64 4 PowerComprehensive Training
of Mechanical design 2w 2 Mech
Machinery Manufacturing Technology and Engineering Materials
32 2Power
304 19
Term CourseTotal Hours Credit School Remarks
6
The Structure and Principle of Internal Combustion Engine 64 3 Power
Fuel Cell 32 2 Power Elective
Power Auxiliary Machinery 48 3 Power
Biomass Energy 32 2 Power Elective
Heat Transfer Theory 48 3 Power
Test of Fundamentals of Heat Energy Engineering
32 2Power
Professional Comprehensive Test
32 2Power
Energy and Power Engineering System Simulation
32 2Power
288 18
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Fourth year in the university -------------
Term CourseTotal Hours Credit School Remarks
The Structure and Principle of Gas Turbine
64 4Power
Marine Power Plant 48 3 Power
Control of Vibration and Noise
32 2Power Elective
Solar Energy Technology and Application
32 2Power Elective
Wind Power Technology 32 2 Power Elective
Professional Comprehensive Training
3w 3Power
Literature Retrieval 16 1 Power
256 16
Term CourseTotal Hours Credit School Remarks
8 Graduation Project16wee
ks 16
Power
16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe study of EE program lasts 4 years in all and is composed of two periods. The first period of
teaching and the last six months is for the students’ practice.
Total credits: 129
The Key CoursesThe key courses which will be instructed in the first period of 3.5 years include:
1&2 Advanced Mathematics 1&2 Electric Machinery
Linear Algebra Automatic Control of Power Drive System
1&2 College Physics 1&2 PLC Electrical and PLC Technology
Analog Electronics Electrical Power Engineering
Digital Electronics Automatic Control Theory
Electric Circuit Microcomputer Principle and Interface Technology
Power Electronics Electric Drive
Detection and Instrumentation Industrial Control Network
ObjectivesThe major trains enrolled students to be assistant engineers of electrical engineering in design,
development and applications. By study, students can master the fundamental theories and basic techniques of electrical engineering; eligible to analysis, design and develop electrical engineeringsystem and engineering management capability.Requirements
Abide by the relevant policies and decrees formulated by the Chinese government, and the rules and regulations of Jiangsu University of Science and Technology JUST .
Be in good health condition, study hard and have good moral character.Respect the teaching staff and Chinese traditions and customs.Develop scientific attitude in research and study and stress the combination of theory and practice.
Have a good command of basic theories and systematic knowledge in the field of electrical engineering. Be able to read Chinese literature in the field of electrical engineering.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term CourseTotalHours Credit Remarks
1
Introduction of China 64 4 Eng
-1 Advanced Mathematics-1 64 4 Math
-1 Chinese-1 64 4 Eng
Electrical Technical Terms 48 3 Elec
-1 College Physics -1 48 3 Math
288 18
Term CourseTotalHours Credit Remarks
2
-2 Advanced Mathematics 2 64 4 Math
Linear Algebra 32 2 Math
-2 Chinese-2 64 4 Eng
-2 College Physics -2 48 3 Math
Introduction on Electrical Engineering 32 2 Elec
208 15
----------- Second year in the university ----
Term CourseTotalHours Credit Remarks
3
Electric Circuit 104 6.5 Com
-3 Chinese-3 48 3 Eng
Analog Electronics 88 5.5 Elec
272 15
Term CourseTotalHours Credit Remarks
4
Chinese-4 -4 48 3 Eng
Digital Electronics 80 5 Elec
Electric Machinery 72 4 Elec
200 12
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Third year in the university -------------
Term CourseTotalHours Credit Remarks
5
Automatic Control of Power Drive System64 4
Elec
PLCElectrical and PLC Technology
48 3Elec
Automatic Control Theory80 4.5
Elec
192 11.5
Term CourseTotalHours Credit Remarks
6
Power Electronics 64 4 Elec
Electric Drive 48 3 Elec
Microcomputer Principle and Interface Technology;72 4.5
Elec
184 11.5
----------- Fourth year in the university -------------
Term CourseTotalHours Credit Remarks
7
Electrical Power Engineering 40 2.5 Elec
Industrial Control Network 32 2 Elec
Detection and Instrumentation 32 2 Elec
104 6.5
Term CourseTotalHours Credit Remarks
8Professional internship 3weeks 3 Elec
Graduation project 14weeks 14 Elec
17
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe study of BA program lasts 4 years in all and is composed of two periods. The first period of teaching and
the last six months is for the students’ practice.
Total credits: 146
The Key CoursesThe key courses which will be instructed in the first period of 3.5 years include:
Engineering Graphics Introduction of Materials Science & Engineering Mechanics Material ChemistryElectrical and Electronic Engineering Mechanical Properties of MaterialsComputer in Materials Science Technology Physical ChemistryGelatin Material Equipment &Technology Fundamental of Material ScienceSynthesize and Processing of Materials Methods of Materials TestingMaterial process Material science and engineering
ObjectivesMaterials Science & Engineering (MSE) is a major that is concerned with the structure and properties of all
engineering materials. After graduation, MSE students have wide basic theory in materials science and technology, and can become materials research workers or materials engineers who are responsible for designing, producing, examining and testing diverse materials. Students graduated with honor, can also do some research, education, development and management work related to materials designing and producing, materials processing, manufacturing and relative areas etc..
RequirementsAbide by the relevant policies and decrees formulated by the Chinese government, and the rules and
regulations of Jiangsu University of Science and Technology JUST . Be in good health condition, study hard and have good moral character. Respect the teaching staff and Chinese traditions and customs. Develop scientific attitude in research and study and stress the combination of theory and practice. Have a good command of basic theories and systematic knowledge in the field of scinece and engineering. Be able to read Chinese literature in the field of materail science and engineering.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term Course Total Hours Credit School Remarks
1
Introduction of China 64 4 Eng
-1 Advanced Mathematics-1 64 4 Math
-1 Chinese-1 64 4 Eng
-1 Sports -1 64 4 Sports
Introduction on Computer 48 3 Comp
304 19
Term Course Total Hours
Credit School Remarks
2
-2 Advanced Mathematics-2 64 4 MathIntroduction of
Materials Science & Engineering32 2 Ma
-2 Chinese-2 64 4 Eng
-1 College Physics -1 64 4 Math
Engineering Graphics 64 4 Eng
-2 Sports -2 32 2
320 20----------- Second year in the university ----
Term Course Total Hours Credit School Remarks
3
-3 Chinese-3 48 3 Eng
Linear Algebra 32 2 Math
-2 College Physics-2 64 4 Mgt
-3 Sports -3 64 4 Mgt
College Chemical 64 4 Mgt
Engineering Mechanics 48 3
320 20
Term Course Total Hours Credit School Remarks
4
-4 Chinese-4 48 3 Eng
Probability Theory and Mathematical Statistics 64 4 Mgt
64 4 Mgt
Physical Chemistry 64 4 Mgt
Information Retrieval 8 1 Mgt
-4 Sports -4
256 16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Third year in the university -------------
Term Course Total Hours Credit School Remarks
5
Electrotechnics 64 4 Mgt Fundamental of
Machinery Design 64 4 Mgt
-1 Fundamental of Material Science 1
64 4 Mgt
-2 Fundamental of Material Science 2 64 4 Mgt
Material process 48 3
304 19
Term Course Total Hours Credit Remarks
6
Practice of Fundamental Mechanical Design32 2
Gelatin Material Equipment &Technology 64 4 Mgt
64 4 Mgt
64 4 Mgt
Methods of Materials Testing64 4 Mgt
productive practice 48 2
320 20----------- Fourth year in the university -------------
Term Course Total Hours Credit School Remarks
7
Computer in Materials Science & Engineering
64 4 Mgt
Advanced Materials Processing
64 4 Mat
Surface Hardening 32 2 Mat
Materials Corrosion and Protection32 2 Mat
Materials advancement and technological innovation
32 2 Mat
advanced material 32 2 Mat
256 16
Term Course Total Hours
Credit School Remarks
8Professional internship 4w 4 Mgt
Graduation project 14w 12 Mgt
16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe study of BA program lasts 4 years in all and is composed of two periods. The first period of
teaching and the last six months is for the students’ practice.
Total credits: 139
The Key CoursesThe key courses which will be instructed in the first period of 3.5 years include: Foundations of Management Business EconomicsOrganizational Behaviors Accounting and Finance for BusinessMarketing Human Resource ManagementStrategic Management Operations ManagementConsumer Behavior Management Information SystemServices Marketing Customer Relationship Management
ObjectivesThe program of Business Administration aims at nurturing advanced talents with hardworking,
adaptable, creative, competitive and communicative abilities as well as profound knowledge of management, economics, law, strategy planning, finance and accounting, manufacturing operation, human resource management, who will be able to engage in international business and marketing management in enterprises, public and service sectors.
Requirements Abide by the relevant policies and decrees formulated by the Chinese government, and the rules
and regulations of Jiangsu University of Science and Technology JUST . Be in good health condition, study hard and have good moral character.Respect the teaching staff and Chinese traditions and customs.Develop scientific attitude in research and study and stress the combination of theory and practice.Have a good command of basic theories and systematic knowledge in the field of business. Be able to read Chinese literature in the field of business.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term CourseTotalHours Credit School Remarks
1
Introduction of China 64 4 Eng
-1 Advanced Mathematics-1 64 4 Math
-1 Chinese-1 64 4 Eng
Business Foundations 64 4 Mgt
Introduction on Computer 48 3 Mgt
304 19
Term CourseTotal Hours
Credit
School Remarks
2
-2 Advanced Mathematics-2 64 4 Math
Linear Algebra 32 2 Math
-2 Chinese-2 64 4 Eng
Foundations of Management 64 4 Mgt
Business Economics 64 4 Mgt
288 18----------- Second year in the university ----
Term CourseTotal Hours Credit School Remarks
3
-3 Chinese-3 48 3 Eng
Business Analytics 64 4 Mgt
Organizational Behaviors 64 4 MgtAccounting and Finance for
Business64 4 Mgt
Fundamentals of Finance 64 4 Mgt
304 19
Term CourseTotal Hours Credit School Remarks
4
-4 Chinese-4 48 3 Eng
Introduction to Business Law 64 4 Mgt
Marketing 64 4 Mgt
Management Information System 64 4 Mgt
Human Resource Management 64 4 Mgt
304 19
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Third year in the university -------------
Term CourseTotalHours Credit School Remarks
5
Consumer Behavior 64 4 Mgt
Operations Management 64 4 Mgt
E-Business 64 4 Mgt
Quality Management 64 4 Mgt
256 16
Term CourseTotalHours Credit Remarks
6
Advertising and Sales Promotion 64 4 Mgt
Project Management 64 4 Mgt
Services Marketing 64 4 Mgt
Customer Relationship Management 64 4 Mgt
256 16
----------- Fourth year in the university -------------
Term CourseTotalHours Credit School Remarks
7
International Financial management 64 4 Mgt
Strategic Management 64 4 Mgt
Selling & Sales Management 64 4 Mgt
International Marketing 64 4 Mgt
256 16
Term CourseTotalHours Credit School Remarks
8Professional internship 4w 4 Mgt
Graduation project 14w 12 Mgt
16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe study of BA program lasts 4 years in all and is composed of two periods. The first period one
year of learning language and the last three years are for the students’ specialized courses.
Total credits: 130
The Key CoursesThe key courses which will be instructed in the last period of 3 years include: Foundations of Management Business EconomicsOrganizational Behaviors Accounting and Finance for BusinessMarketing Human Resource ManagementStrategic Management Operations ManagementConsumer Behavior Management Information SystemServices Marketing Customer Relationship Management
ObjectivesThe program of Business Administration aims at nurturing advanced talents with hardworking,
adaptable, creative, competitive and communicative abilities as well as profound knowledge of management, economics, law, strategy planning, finance and accounting, manufacturing operation, human resource management, who will be able to engage in international business and marketing management in enterprises, public and service sectors.
Requirements Abide by the relevant policies and decrees formulated by the Chinese government, and the rules
and regulations of Jiangsu University of Science and Technology JUST . Be in good health condition, study hard and have good moral character.Respect the teaching staff and Chinese traditions and customs.Develop scientific attitude in research and study and stress the combination of theory and practice.Have a good command of basic theories and systematic knowledge in the field of business. Be able to read Chinese literatures in the field of business.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term Course No. CharacterTotal Hours Credit School Remarks
1
Comprehensive Curriculum 96 6
Listening and Speaking 96 6
Reading 64 4
Writing 64 4
320 20
Term Course No. CharacterTotal Hours Credit School Remarks
2
Comprehensive Curriculum 64 4
Listening and Speaking 64 4
Reading 64 4
Writing 64 4
256 16
----------- Second year in the university -----------
Term Course No. CharacterTotal Hours Credit School Remarks
3
Foundations of Management a 64 4 Mgt.
Business Analytics a 64 4 Mgt.
Business Economics b 64 4 Mgt.Accounting and Finance
for Businessa 64 4 Mgt.
256 16
Term Course No. CharacterTotal Hours Credit School Remarks
4
Introduction to Business Law b 64 4 Mgt.
International Marketing b 64 4 Mgt.Management Information
Systema 64 4 Mgt.
Human Resource Management
b 64 4 Mgt.
256 16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Third year in the university -------------
Term Course No. CharacterTotalHours Credit School Remarks
5
Organizational Behaviors b 48 3 Mgt
Operations Management a 64 4 Mgt
E-Business b 64 4 Mgt
Quality Management a 64 4 Mgt
240 15
Term Course No. CharacterTotalHours Credit School Remarks
6
Fundamentals of Finance b 64 4 Mgt.
Project Management a 64 4 Mgt.
Services Marketing b 64 4 Mgt.
Strategic Management a 64 4 Mgt.
256 16
----------- Fourth year in the university -------------
Term Course No. CharacterTotalHours Credit School Remarks
7
International Financial management
b 64 4 Mgt.
Customer Relationship Management
b 48 3 Mgt.
Selling & Sales Management b 64 4 Mgt.
Advertising and Sales Promotion b 64 4 Mgt.
240 15
Term Course No. CharacterTotalHours Credit School Remarks
8Professional internship b 4w 4 Mgt.
Graduation project b 14w 12 Mgt.
18W 16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe study of CS&T program lasts 4 years in all and is composed of two periods. The first period of
teaching and the last six months is for the students’ practice.
Total credits: 129
The Key CoursesThe key courses which will be instructed in the first period of 3.5 years include: Discrete Mathematics Database PrincipleData Structure Basic Concepts of Computer HardwareOperating System Software EngineeringAlgorithm design and analysis Artificial IntelligenceC++ Programming .Net FrameworkJava Programming HTML & JavaScriptAlgorithms in Python Web Programming with PHPMobile App Development Software Project Management
ObjectivesThe major trains enroll students to produce quality engineers of computer software and hardware in
design, development and applications. By study, students can master the fundamental theories and basic techniques of computer software and hardware; eligible to analysis, design and develop software; eligible to use, develop and maintain hardware; eligible to operate and maintain computer networks.
Requirements Abide by the relevant policies and decrees formulated by the Chinese government, and the rules
and regulations of Jiangsu University of Science and Technology JUST . Be in good health condition, study hard and have good moral character.Respect the teaching staff and Chinese traditions and customs.Develop scientific attitude in research and study and stress the combination of theory and practice.
Have a good command of basic theories and systematic knowledge in the field of computer science.Be able to read Chinese literature in the field of computer science.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term CourseTotalHours Credit Remarks
EngMath
EngComCom
288 18
Term CourseTotalHours Credit Remarks
2
MathMath
Eng
ComCom
296 18.5 ----------- Second year in the university ----
Term CourseTotalHours Credit Remarks
3
ComEng
Com
Com
Com
296 18.5
Term CourseTotalHours Credit Remarks
4
EngCom
Com
Algorithms in Python Com
240 15
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Third year in the university -------------
Term CourseTotalHours Credit Remarks
5
MAC OS Com
Oracle Com
.Net Framework Com
Web Programming with PHP Com
Com
240 15
Term CourseTotalHours Credit Remarks
6
HTML and JavaScript Com
Mobile App Development
48 3Com
Algorithm design and analysis
Com
Matlab Com
Software Project Management 32 2 Com
224 14
----------- Fourth year in the university -------------
Term CourseTotalHours Credit Remarks
7
Digital Image Processing 48 3 Com
Information Security 32 2 Com
New Trend in Computer Science
32 2Com
XML XML Programming 32 2 Com
Computer Animation 32 2 Com
Artificial Intelligence 32 2 Com
208 13
Term CourseTotalHours Credit Remarks
8Professional internship Com
Graduation project Com
17
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Duration of StudyThe four-year Civil Engineering CE) undergraduate program consists of two periods, with the first
three years for classroom instruction and the final year for students practice.
Total credits: 162
The Key CoursesThe following key courses are offered during the first period of 3 years:
Engineering Mechanics Steel Structure Design PrinciplesStructural Mechanics Construction EquipmentFluid Mechanics Civil Engineering DrawingFoundation Engineering Management of Engineering Civil Engineering Materials Earthquake-resistance of Engineering and Disaster PreventionCivil Engineering Surveying Civil Engineering ConstructionConcrete Structure Design Principle Engineering EconomicsEngineering Geology and Soil Mechanics Architectural structure designBuilding Architecture Structural Analysis and the Finite
ObjectivesJiangsu University of Science and Technology aims to produce high-quality graduates with a solid
foundation of knowledge, a strong spirit of innovation and professional proficiency in constructiontechnology as well as management.Requirements
Students are required to:-Abide by the relevant policies and decrees formulated by the Chinese Government, and the rules
and regulations of Jiangsu University of Science and Technology JUST . -Respect the teaching staffs and Chinese traditions and customs.-Develop scientific attitudes towards research have certain theoretical foundation and systematic
knowledge in the field of civil engineering.-Have a strong interest in civil engineering and good professional ethics.-Have a good command of Chinese language and get HSK certificates as required. Be able to read
Chinese professional literature in the field of civil engineering.-Be in good health.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- First year in the university -------------
Term CourseTotalHours Credit Remarks
1
Introduction of China 64 4 SFL
-1 Advanced Mathematics-1 64 4 FS Required
-1 Chinese-1 64 4 SFL
English for Civil Engineering Majors 16 1 SFL
Introduction of Civil Engineering 16 1 SACE
Basic Engineering Drawing 16 1 SACE
-1 College Physics -1 48 3 FS
-1 Physics Experiment -1 16 1 FS
Practice for Broadening 1W 1 SACE
304 20
Term CourseTotalHours Credit Remarks
2
-2 Advanced Mathematics 2 64 4 FS
Linear Algebra 32 2 FS
-2 Chinese-2 64 4 SFL
Introduction on Computer 16 1 SCSE
-2 College Physics -2 48 3 FS
-2 Physics Experiment -2 16 1 FS
Civil Engineering Drawing 32 2 SACE
272 17
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Second year in the university ----
Term CourseTotalHours Credit
Remarks
3
-3 Chinese-3 48 3 SFL
FC Programming in F(C) 64 4 SCSE
Probability and Statistics 32 2 FS
-1 Engineering Mechanics-1 48 3 SNAOE
Civil Engineering Surveying 48 3 SACE
Surveying Practice 2W 2 SACE
Civil Engineering Materials 48 3 SACE
288 20
Term CourseTotalHours Credit
Remarks
4
Chinese-4 -4 48 3 SFL
-2Engineering Mechanics-2 48 3 SNAOE
Structural Static Mechanics 80 5 SACE
Engineering Geology and Soil Mechanics48 3 SACE
Building Architecture 56 3.5 SACE
Practice of Engineering Geology 1W 1 SACE
Course Design Work for Building Architecture2W 2 SACE
296 20.5
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Third year in the university -------------
Term CourseTotalHours Credit Remarks
5
HSK Test 32 2 SFL
Information Retrieval 16 1
Fluid Mechanics 32 2 SNAOE
Concrete Structure Design Principle72 4.5 SACE
Foundation Engineering 24 1.5 SACE
Dynamics of Structure 24 1.5 SACE
Structural Analysis and the Finite Element Method
32 2 SACE
Engineering Economics 24 1.5 SEM
Course Design Work for Foundation Engineering
1W 1 SACE
Course Design Work for Concrete Structures2W 2 SACE
256 19
Term CourseTotalHours Credit Remarks
6
Design Principle of Steel Structure48 3 SACE
Structural Analysis Software and Application32 2 SACE
Architectural structure design 48 3 SACECivil Engineering
Construction 64 4 SACE
Building Structures Inspection 32 2 SACE
Construction Software and Applications32 2 SACE
Comprehensive Test of Civil Engineering Test
1W 1 SACE
Course Design Work for Steel Structures 1.5W 1.5 SACE
Course Design Work for Construction Organization
1.5W 1.5 SACE
272 21
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
----------- Fourth year in the university -------------
Term CourseTotalHours Credit Remarks
7
Earthquake-resistance of Engineering and Disaster Prevention
40 2.5 SACE Elective
Engineering Accident Treatment40 2.5 SACE Elective
Engineering Equipment 24 1.5 SEPE Elective
Construction Supervision and Contract Management
40 2.5 SACE
Large span Structures 32 2 SACE
Modern Prestressed Structure32 2 SACE
Management of Engineering Project40 2.5 SEM
Construction Practice4W 4 SACE
Lectures on Special Topics and Document Reading
1W 1
264 21.5
Term CourseTotalHours Credit Remarks
8 Graduation project 17W 17 SACE
17Note:SFL- School of Foreign LanguagesSM- School of MarxismSCSE-School of Computer Science and Engineering SD-Sport Department FS-Faculty of ScienceSACE- School of Architecture and Civil Engineering SEM- School of Economics and ManagementSNAOE- School of Naval Architecture and Ocean Engineering SEPE- School of Energy and Power Engineering
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn