FILTER SEPARATOR

-15-

Filter Separator General Description

Filter separators are used to remove liquid and solid

impurity substance in gas or other gas not aggressive.

Shanghai Fiorentini offer filter separators which can remove

liquid and solid impurity substance with different size even

that minimal size dust or mist. .

SL Leaf Filter Separator

XFS Horizontal Cartridge Leaf Filter Separator

YFS Vertical Cartridge Leaf Filter Separator

YGF Vertical Cartridge Leaf Filter Separator

Technical Parameter Feature

General Description

Designing standard: ASME VIII div.1

GB150-1998

Structure style: Horizontal/Vertical;

High filter separating efficiency

Low pressure loss

Easy maintenance

Flange connection: ANSI 150/300/600 RF.

Materials

Shell: Steel pipe 20 GB / T8163-1999

Steel blank 16MnR GB6654-1996

Cap: Steel Blank 16MnR GB6654-1996

Flange: Forging 16MnII JB4726-2000

Closure removing device: Forging 16MnII / 20II

JB4726-2000

Options

Closure removing device

Outlet regulator

Flange elevated device

Pressure switcher

Pressure gauge

Hydrological switcher

Hydrological gauge

General Character Parameter

Maximum working pressure: 1.6 MPa 2.5 MPa

4.0 MPa 6.4MPa

Designing temperature: 60

Working temperature: -10 50

Filter separating accuracy: 0.5 1 2 5

10 50

Filter separating efficiency:

Maximum volume: 450, 000Nm3/h (NG)

10Mpa

99.98% 10

-17--16-

Leaf Separator

Leaf filter separators are the optimized products with high

working efficiency, low prices and easy maintenance type to

remove liquid impurity substance in gases and water vapors.

Leaf, as the most impartment component, can be made up of

different kind of guiding sheets which can be made of

carbon steel, stainless steel and aluminum or different

working environment required. .

Leaf Separating Principle

Gas will be separated into various vertical style gas flowing

by the leaf when flowing into the leaf separator. Each gas

part flows in a changeable direction. With the strong impact,

liquid impurity substance in the gas will be attached to the

leaf wall and fall down to the container, due to the gravity

influence and will be exclude outside when gathered to some

extent. .

Leaf Separating Principle

Leaf separator outside structure Leaf separator inside structure

Remarkable points:

Experiments demonstrate 97% liquid impurity substance

will be removed by the leaf products; the remaining

minimal size liquid impurity substance will be gradually

gathered into bigger size and fall down to the leaf groove.

.

.

Leaf filter separator can not only be used for gas filtering

individually but also be combined with cartridge for more

effective application. .

Cartridge Leaf Filter Separator

YFS Vertical cartridge leaf filter separator YGF Vertical cartridge leaf filter separator

XFS Horizontal cartridge leaf filter separator

-19--18-

Cartridge Leaf Filter Separator Cartridge Leaf Filter Separator

Filter Separator Working Efficiency

Three steps filter separating process for cartridge

leaf filter separator:

Step 1 Gravity separating

Gas flows into the filter body from inlet pipe.

With the strong impact toward the shell surface or cartridge

frame, impurity substance in big size will be screened from

gas;

Step 2 Screening holes separating

Rechargeable filtering devices are equipped at the head side

of the separator. The type and efficiency level can be chosen

by different working requirement.

Solid impurity substance in minimal size will be removed

and gathered into mist style stuff.

XFS, YFS and YGF cartridge leaf filter separators with high working efficiency in 100% working efficiency for liquid impurity substance 8~10 ; 99.5% working efficiency for liquid impurity substance 0.5~8 ; 100% working efficiency for dry solid impurity substance 3 ; 99.5% working efficiency for dry solid impurity substance 0.5~3 . .

Step 3 Leaf separating

Leaf separator is used to remove liquid impurity substance

which will be gathered in a proper container inside.

Generally, on the clean cartridge basis, the total pressure

loss can be adjusted from 300mm water column to 1000mm

water column, accordingly. .

-21--20-