rapid tac inc. - categories - -sign supplies and … to use rapid tac, rapid tac ii and the cheapest...

RAPID TAC INC. GRAPHIC FILM APPLICATION SOLUTIONS

Beginning in 1987 with the original Rapid Tac Application Fluid, Rapid Tac Products have been changing the way pressure

sensitive vinyl fi lms are installed worldwide. We created the original Rapid Tac Application Fluid to solve many of the

diffi culties associated with installing pressure sensitive vinyl fi lm. Applying vinyl “wet” allowed the installer to re-posi-

tion the fi lm for proper registration without stretching or tearing. The concept was great, but the oft-used solution

of mixing a little dish soap and water created new problems. The fi rst problem associated with plain soap and water

was trapped liquid or air bubbles. The second problem was prolonged bonding time. Soap and water does nothing to

promote bonding and thus would often result in an application that wouldn’t bond well, or at all. It was common to see

sign installers apply their fi lms wet then come back 24 to 48 hours later to carefully remove the transfer tape to com-

plete their installation. Not good. The third problem arose with Mother Nature. If the temperature and humidity wasn’t

just right the problems with bonding became unmanageable. If temperatures dropped below comfortable, you could

all but forget about applying fi lm using the wet method. One of the most serious and often overlooked issues associ-

ated with wet fi lm application was contamination and inconsistency. Adhesives and vinyl fi lms are sensitive to solvents,

oils, silicones and other contaminants and often when mixing a home brew application fl uid, the installer directly con-

taminated the application without knowing it, thus created much frustration during the installation. The advantages of

wet installation were quickly being outweighed by lengthy, inconsistent installations.

Rapid Tac Application fl uid solved these problems.

Now almost 20 years later, Rapid Tac Inc. is still helping installers achieve fast, hassle free installations even in the most

demanding conditions. We now offer products ranging from pressure sensitive vinyl application fl uids, adhesive remov-

ers, wax and silicone cleaners, to vinyl application squeegees.

We are so confi dent that Rapid Tac products will work for you that we offer a 60 day buy back guarantee. It’s simple, if

you’re not satisfi ed with a Rapid Tac product we will buy it back from you. Rapid Tac products work so well that in the

history of Rapid Tac Inc, we have never been asked to buy back a single bottle.

Let Rapid Tac Products solve your fi lm removal and application needs.

ABOUT RAPID TAC

Rapid Tac Inc.186 Combs Dr.

Merlin, Oregon 97532800.350.7751

WWW.RAPIDTAC.COM 800.350.7751

GET IT RIGHTSuccessful Graphic Applications require the right combination of preparation, knowl-

edge and quality products.

Preparation: In the last 20 years the most common factor that we have seen contribute to a poor

or failed application is poor or inadequate preparation (cleaning). Pressure sensitive fi lm isn’t only sensitive to pres-

sure. The adhesives used today (though very good) are still subject to failure when incompatible solvent, waxes and

chemical residues are on the substrate. In simple terms, the more you know about surface preparation the better

the chances you have at achieving a perfect installation every time. At Rapid Tac we have always advised our cus-

tomers to use Rapid Tac, Rapid Tac II and the cheapest plain white kitchen paper towels to clean with. If you suspect

that wax, grease or oil of any kind may be on the substrate, we recommend using Rapid Prep as a pre cleaner, then

following up with a second cleaning using Rapid Tac or Rapid Tac II. Rapid Tac application fl uids are designed clean-

ers, positioning fl uids and adhesive stimulants. The combination of Rapid Tac application fl uids and cheap paper

towels will ensure a clean substrate ready for application. Rapid Tac and Rapid Tac II are wonderful cleaners, capable

of removing incompatible residues that are often unseen and undetected before an application. We advise our

customers to NEVER use shop rags or cloth towels because they often contain residue chemicals from their last use

or cleaning. Even paper towels that have printing, scents, or super absorbent properties can and often do contain

chemical residues that will contaminate an application substrate. We also advise against using commercial and

household cleaning products such as Isopropyl alcohol, solvent based wax removers, household cleaners, household

glass cleaners and of course any product that contains ammonia. These products can leave residues that not only

cause problems during an application, but also reduce the life of the adhesive bond and even the vinyl fi lm itself.

Knowledge: The right knowledge is key to successful fi lm application. In addition to correct

preparation, knowledge of the installation is crucial. We often get technical feedback from customers experienc-

ing installation issues because they weren’t given the right information about their particular installation. Common

failures include using high tac transfer tape on a low tac vinyl fi lm, using the wrong products to prepare a surface

and thinking that the phrase “High Performance” means the fi lm is premium cast, when often high end calandared

fi lms are labeled “High Performance.” Proper training, research, and a phone call or two can not only save time but

reduce failures signifi cantly.

Quality Products: In addition to utilizing Rapid Tac products, the right combination of quality equip-

ment, fi lms and supplies can mean the difference between success and failure. There are more choices in vinyl cut-

ters, printers, vinyl fi lms, supplies and even application fl uids than ever before. Your installations are only as good

as the products you choose, so choose the best. Rapid Tac products are quality products and ensure quality results.

Don’t sabotage your work by cutting corners with substandard products.


control over their applications than ever before. Now

what took hours could be accomplished in minutes.

Using Rapid Tac Application fl uid can often allow a

large graphic to be installed with one person where

two people were required to perform the same

installation dry. Rapid Tac Application Fluid cleans

the substrate without leaving residues ensuring a

contaminant free installation. It then helps to “fl oat”

the vinyl fi lm until it is properly positioned. Rapid Tac

Application Fluid’s best feature is that it effectively

breaks the surface tension of the adhesive on the fi lm

allowing it to fl ow and bond to the substrate more

effectively than a dry application. It is now possible

to achieve a full bond in as little as ninety seconds.

Your customers and your reputation will benefi t from

higher-quality applications. Your bottom line will ben-

efi t from faster applications and less failures.

STEP 1. Clean surface thoroughly with Rapid Tac and a

CHEAP KITCHEN PAPER TOWEL. DO NOT USE OTHER

CLEANERS OR SOLVENTS.

(We recommend Rapid Prep as a pre-cleaner for

surfaces that may have been exposed to wax, oils,

silicone or other suspected contaminants)

STEP 2. Spray surface again with Rapid Tac, peel

backing off decal and place on wet surface. (You may

also spray adhesive side of fi lm). Note: Spray product

liberally; do not lightly mist, as this will create trapped

air bubbles.

STEP 3. Position decal. Use squeegee to remove fl uid,

using a very fi rm pressure and working from the cen-

ter out to the edges in all directions.

STEP 4. Wait 2-3 minutes. Saturate paper transfer

tape, if any, with Rapid Tac and remove transfer tape.

Wipe surface with paper towel.

RAPID TACAPPLICATION FLUIDFor High Performance Premium Cast Films

Individuals:

Rapid Tac - 4 oz. With Sprayer RT-00041-9 6-40361-00041-9Rapid Tac - 8 oz. With Sprayer RT-00081-5 6-40361-00081-5Rapid Tac - 30 oz. With Sprayer RT-00321-2 6-40361-00321-2Rapid Tac - 125 oz. RT-01281-8 6-40361-01281-8Rapid Tac - 5 Gallon Drum RT-64001-1 6-40361-38401-4Rapid Tac - 30 Gallon Drum RT-38401-4 6-40361-64001-1

Cases:

Rapid Tac - 4 oz., Case of 50 RT-10041-6Rapid Tac - 8 oz., Case of 25 RT-10081-2Rapid Tac - 30 oz., Case of 12 RT-10321-9Rapid Tac - 125 oz., Case of 4 RT-11281-5

Part Number UPC Code

Rapid Tac Application

Fluid shocked installers

by allowing them more

VISIT WWW.RAPIDTAC.COM FOR MSDS DOWNLOADS


Fluid shocked installers

by allowing them more

basically two fi lm types, cast and calandared. Nowa-

days things are a little different. Sign and graphics

professionals now have more types of vinyl fi lms to

choose from than ever, with more adhesive types as

well. We developed RAPID TAC II to work with a wider

variety of fi lms such as the economy calandared,

intermediate calandared, high performance ca-

landared, metallic, refl ective, polyester, mylar and

other specialty fi lms. RAPID TAC II promotes bonding

faster than the original RAPID TAC application fl uid

and is ideal for cold weather and glass application.

RAPID TAC II is not a replacement for the Original

RAPID TAC, and may bond too fast with “Premium

Cast” fi lms in warmer conditions.

STEP 1. Clean surface thoroughly with RAPID TAC

II and a CHEAP KITCHEN PAPER TOWELL. DO NOT USE

OTHER CLEANERS OR SOLVENTS.

(We recommend RAPID PREP as a pre-cleaner for

surfaces that may have been exposed to wax, silicone

or other suspected contaminants)

STEP 2. Spray surface again with RAPID TAC II, peel

backing off decal and place on wet surface.

STEP 3. Position decal. Use squeegee to remove fl uid,

using a good deal of pressure and working from the

center out to the edges in all directions.

STEP 4. Wait 2-3 minutes. Saturate paper cover tape,

if any, with RAPID TAC II, then remove paper tape.

Wipe surface with paper towel.

RAPID TAC IIAPPLICATION FLUID

For Intermediate Calandared and Specialty Films

Individuals:

Rapid Tac II - 4 oz. With Sprayer RT2-00047-1 6-40361-00047-1Rapid Tac II - 8 oz. With Sprayer RT2-00087-7 6-40361-00087-1Rapid Tac II - 30 oz. With Sprayer RT2-00327-4 6-40361-00327-4Rapid Tac II - 125 oz. (Gallon Size) RT2-01287-0 6-40361-01287-0Rapid Tac II - 5 Gallon Drum RT2-64007-3 6-40361-64007-3Rapid Tac II - 30 Gallon Drum RT2-38407-6 6-40361-38407-6

Cases:

Rapid Tac II - 4 oz., Case of 50 RT2-70047-0 Rapid Tac II - 8 oz., Case of 25 RT2-70087-6Rapid Tac II - 30 oz., Case of 12 RT2-70327-3Rapid Tac II - 125 oz., Case of 4 RT2-71287-9


Change is good. Back

in the day choosing a

vinyl fi lm was easy with



Change is good.

in the day

vinyl fi

RAPID PREPPRE CLEANER

er workplace, we developed a pre-cleaner that

not only works great but is safe to use. Gone

are the days of using hazardous, fl ammable

chemicals for pre-cleaning. Wax, grease, oil

and silicone residues are the number one

reason for both paint and fi lm application

failures. Rapid Prep easily and safely elimi-

nates these and other contaminants ensuring

a successful paint or fi lm application as well as

a happy customer. Ideal for pre-cleaning al-

most any surface including automobile paint,

bare metals, sign materials and glass, Rapid

Prep was formulated by people with hands on

experience and a desire to make a safer more

effective pre-cleaner.

STEP 1. Spray liberally on surface to be

cleaned.

STEP 2. Using a plain white household paper

towel, thoroughly wipe surface from center

outward until dry.

STEP 3. Repeat step 2.

IIndividuals:

Rapid Prep:Rapid Prep - 4 oz. RP-00045-7 6-40361-00045-7Rapid Prep - 8 oz. RP-00085-3 6-40361-00085-3Rapid Prep - 30 oz. RP-00325-0 6-40361-00325-6Rapid Prep - 125 oz. RP-01285-6 6-40361-01285-6Rapid Prep - 5 Gallon Drum RP-64005-9 6-40361-64005-9Rapid Prep - 30 Gallon Drum RP-38405-2 6-40361-38405-2

Cases:

Rapid Prep - 4 oz., Case of 50 RP-50045-2Rapid Prep - 8 oz., Case of 25 RP-50085-8Rapid Prep - 30 oz., Case of 12 RP-50325-5Rapid Prep - 125 oz., Case of 4 RP-51285-1


Preparation is key to

success. With an ever

growing need for a saf-


For removing wax, oil, grease, and silicone


developed a pre-cleaner that a saf-

we have your solution. Rapid Remover is a

non-toxic, water-soluble adhesive remover

that breaks down and removes adhesives in

as little as sixty seconds! Spray it on, wait a

few minutes and easily wipe away residue

adhesive with a plastic squeegee and paper

towel. Not only does Rapid Remover work

fast, but it works without causing damage to

most painted or bare metal surfaces. What

may have been a four hour job (and a messy

one at that) can now be done in half the

time with an easy, clean and safe process.

Gone are the days of using dangerous chemi-

cals that often damaged painted surfaces

and had numerous health hazards. Rapid

Remover works. It’s that simple.

STEP 1. Remove decal with heat lamp or heat

gun.

STEP 2. Spray glue residue with Rapid Re-

mover and let penetrate for 30-60 seconds.

STEP 3. Using a squeegee, scrape to remove

glue residue.

STEP 4. Spray Rapid Remover on a paper

towel and wipe surface clean.

STEP 5. Rinse surface with Rapid Tac Applica-

tion fl uid or water. Rapid Remover is water-

soluble.

RAPID REMOVERADHESIVE REMOVER

Individuals:

Rapid Remover - 4 oz. RR-00043-3 6-40361-00043-3Rapid Remover - 8 oz. RR-00083-9 6-40361-00083-9Rapid Remover - 32 oz. RR-00323-6 6-40361-00323-6Rapid Remover - 128 oz. RR-01283-2 6-40361-01283-2Rapid Remover - 5 Gallon Drum RR-64003-5 6-40361-64003-5Rapid Remover - 30 Gallon Drum RR-38403-8 6-43061-38403-8

Cases:

Rapid Remover - 4 oz., Case of 50 RR-30043-4 Rapid Remover - 8 oz., Case of 25 RR-30083-3Rapid Remover - 32 oz. Case of 12 RR-30323-7Rapid Remover - 128 oz Case of 4 RR-31283-3


Keep it simple.

When faced with

removing adhesive


For removing most residue adhesives


(Always test a small surface area for compatibility.)

Keep it simple.

When faced with

removing adhesive

look it’s best. Easily clean and polish plexiglass,

glass and most polycarbonates, leaving a luster

that’s sure to impress. Use Rapid Clear as a fi nal

cleaning for your sign work, auto restoration,

etc. Rapid Clear is non-hazardous, non-fl am-

mable and bio-degradable.

Perfect For:Household Glass

Auto Glass

Aircraft Windows

Marine Windows

TV Screens

Computer Monitors

Tinted Glass

Eye Wear

Safety Shields

Cameras

Optical Equipment

Step 1. Using soft scratch resistant cloth, spray

Rapid Clear on surface and wipe clean.

Step 2. Flip cloth over and buff surface

to desired shine and luster.

RAPID CLEARGLAZE & POLISH

Individuals:

Rapid Clear - 4 oz. RC-00049-5 6-40361-00049-5Rapid Clear - 8 oz. RC-00083-9 6-40361-00083-9Rapid Clear - 30 oz. RC-00323-6 6-40361-00323-6Rapid Clear - 125 oz. RC-01283-2 6-40361-01283-2Rapid Clear - 5 Gallon Drum RC-64009-7 6-40361-64009-7Rapid Clear - 30 Gallon Drum RC-38409-0 6-40361-38409-0

Cases:

Rapid Clear - 4 oz., Case of 50 RC-90049-8Rapid Clear - 8 oz., Case of 25 RC-90089-4Rapid Clear - 30 oz., Case of 12 RC-90329-1Rapid Clear - 125 oz., Case of 4 RC-91289-7


Rapid Clear is the perfect

end to a job well done

and will make your work



perfect

ACCESSORIESWe realize it takes more than just a good

application fl uid, or adhesive remover to

get the job done right. Rapid Tac offers

the following accessories to help your

shop run as effi ciently as possible. Please

feel free to call us today and see what new

products we offer to solve your sign instal-

lation needs.

Dura Flex Squeegees

4 inch and now 6 inch sizes

Trigger Sprayers

32 oz. Bottles

Drum Pumps

5 gallon container spigot

Please call today about Rapid Tac hats and

T’s . We are adding creative promotional

items to our inventory all the time.


Trigger Sprayers

5 gallon container spigot

Q: What is the most important step in applying pressure sensitive vinyl fi lms? A: An absolutely clean surface is the key to any good application. Rapid Tac Products were created for this reason.

Q: Why shouldn’t I use cloth towels or shop rags to clean an application surface? A: We recommend using domestic paper towels. Shop rags are great for wiping a great deal of things like oil, tire dressing off of tires, cleaning engine parts, auto detailing, etc. All of these oils, waxes and silicone contaminants can become “trapped” in the rags, and when cleaned by a commercial linen services your shop rags could come back with contaminants from other businesses. There is NO way to ensure that you are getting rags back that are free of these contaminants. Stick with the cheap paper towels, and you will have substantially more consistent applications.

Q: Do I need to buy any “other” cleaning solvents or chemicals? A: No. Rapid Tac and Rapid Tac II are both cleaners as well as application fl uids. If you are concerned that wax, silicone or oil may be present, then clean once with Rapid Prep.

Q: Should I use “lint free / static free” paper towels? A: No, use the “cheap” grocery store kitchen paper towels (they do not contain chemicals). Q: What about paper towels marked “Super Absorbent” or “ Absorbent Pockets”? A: No, they also may contain chemicals that will contaminate your application surface, cause bonding problems, and failure.

Q: When applying vinyl to glass should I use a quality glass cleaner? A: No. Glass cleaners can contain ammonia, silicone and other chemicals that not only degrade vinyl, but will also contaminate your application surface and cause bonding problems.

Q: Why is the vinyl not sticking to the glass when I try to pull off the application tape? What should I do? A: The two most common problems associated with glass applications are surface preparation (cleaning) and transfer tape. You must fi rst (as the instructions on each bottle reads) clean the surface twice with Rapid Tac or Rapid Tac II and cheap paper towels. Second, you must NOT use “High Tac” application tape on non premium-cast vinyl. Low Tac or Mid Tac is what should be used on wet glass applica-tions.

Q: I’m following the instructions on the Rapid Tac bottle for “Glass Application” but I’m still having problems getting the vinyl to bond to the glass in less than 90 seconds. A: Use Rapid Tac II. Rapid Tac II promotes a faster bond and works well with less aggressive adhesives like those found on inter-mediate calandared, metal-ized, Mylar and polyester fi lms. Rapid Tac II also works well in areas of high humidity and in cold temperatures.

Q: How hard should I press when I squeegee? A: You must press VERY hard. The adhesive on pressure sensitive vinyl fi lm consists of a layer of microscopic beads that must be burst by applying pressure to the fi lm, hence the name “pressure sensitive”.

Q: How are Rapid Tac and Rapid Tac II different than soap and water solutions? A: Mixing soap and water to apply vinyl was originally started to aid in positioning. This worked marginally well, but also required an extremely long time to bond (if it would bond at all). Not only does soap and water NOT promote adhesion and bonding, but “mixing-your-own” also introduces the possibility of inconsistency and contamination (what was in the bottle or bucket before you mixed your soap and water formula?). Rapid Tac and Rapid Tac II accomplish several things during an application. First, Rapid Tac and Rapid Tac II are always the same uncontaminated, consistent product every time you need them. They both clean the application surface and leave only a compatible residue. Next, Rapid Tac and Rapid Tac II allow the user to position and reposition the vinyl being applied up to the point of ap-plying pressure with a squeegee. Rapid Tac and Rapid Tac II also activate the adhesive on pressure sensitive vinyls by breaking the surface tension (softening so to speak) of the adhesive beads. Another great benefi t of Rapid Tac and Rapid Tac II is their abilities to release the transfer tape from the vinyl once the fi lm is bonded. The best thing is that all of this can take place in 90 seconds or less.

Q: When I apply refl ective vinyl wet it starts to de-laminate. What should I do? A: Use Rapid Tac II. Rapid Tac II evaporates faster. Soap and water stays wet and trapped under the fi lm too long and can pen-etrate refl ective fi lms causing this de-lamination problem.

Q: What should I use for metal-ized vinyl, polyester and Mylar? A: Rapid Tac II. This new product is not a replacement for Rapid Tac the original, but was designed to work better with less ag-gressive fi lms such as these.

Q: When should I use High Tac application tape, and when should I use Low or Mid Tac. A: Remember this general rule of thumb. When you are applying a large graphic (3ft x 4ft or larger) Low Tac works well because of the large bonding surface for the tape. Graphics of average size (8 inch x 24 inch) use Mid Tac. Anything Smaller (fi ne details, letters less than one inch etc.) do better with High Tac. Also, try to avoid Using High Tac on glass applications, especially with intermediate fi lms

FREQUENTLY ASKED QUESTIONS


At Rapid Tac Inc. product testing is sometimes

taken to extremes. Our products are regularly

put to the test in various forms of motorsports

because of the extreme conditions they must

endure. If a vinyl fi lm application can survive

salt water spray at over one hundred miles per

hour for hours at a time, the bump and grind

of Winston Cup racing, and even endure a trip

over the Black Rock Desert at nearly the speed

of sound on Craig Breedloves “Spirit of America”

land speed car, then we’re confi dent Rapid Tac

products will work fl awlessly for you. Not only

have our products survived the rigors of the

most extreme motorsports events, but they

are tested daily by our customers. Some of our

customers include:

California Department of Forestry and

Fire Protection

Fleetwood Recreational Vehicles

McDonald Douglas Aircraft

Smithsonian Institute

PRODUCT TESTING


Toro Lawn Mowers

Cummings Diesel

Universal Studios

Beaver Coaches

NASA

DisneyLand

Roland Digital

Ranger Boats

Bayliner Boats

Shamrock Boats

Special Thanks to Ron Martin Racing for putting Rapid Tac products to the ultimate test.

The Ron Martin Racing OD Modifi ed Dirt Track car Driven by Jon DeBenedetti is raced and dedicated to the troops killed in action in Iraq. Written in the fl ag are the names and rank of those who gave the ultimate sacrifi ce as of January, 2006. The car is wrapped entirely in vinyl by NEW VISION GRAPHICS of

Batesville, Arkansas. See more of this special car at www.ronmartinracing.com .

The US Air Force

Caterpillar Tractors

Aluma Weld Boats Inc.

Alpha Beta Grocery Stores

Nordstroms Department Stores

DISTRIBUTORS


ALABAMABIRMINGHAM GRIMCO 205-428-2899 BIRMINGHAM GE POLYMERSHAPES 205-595-0033 BIRMINGHAM TUBELITE COMPANY INC. 800-238-5280HUEYTOWN RK ENTERPRISE INC. 205-428-2899KILLEN DETAIL SUPPLY 256-757-9368MONTGOMERY FARCO PLASTICS SUPPLY INC. 334-262-0703MOBILE GRIMCO 251-471-5525 FASTENAL COMPANY 507-454-5374

ALASKAANCHORAGE FASTENAL COMPANY 507-454-5374

ARIZONA MESA MONTROY SUPPLY COMPANY 480-833-1486PHOENIX BEAVER STRIPES & MOLDING 602-269-8000PHOENIX MONTROY SUPPLY COMPANY 602-269-6101PHOENIX TUBELITE COMPANY INC. 602-484-0122PHOENIX WHOLESALE MANNER & SIGN SUPPLIES 602-272-8655PHOENIX N. GLANTZ & SON 602-353-9499PHOENIX SOUTHLAND SIGN SUPPLIES 602-484-7446PHOENIX GE POLYMERSHAPES 602-275-6542PHOENIX GRAPHIC FACTORY 602-268-1908PHOENIX REGAL PIEDMONT PLASTICS 602-437-1000PHOENIX FASTENAL COMPANY 507-454-5374TEMPE BEKAERT SPECIALTY FILMS 858-576-0200TUCSON M&M MOTORSPORTS 520-434-0224TUCSON MONTROY SUPPLY COMPANY 520-622-7443

ARKANSASEL DORADO PLASTIC SIGN SUPPLIERS 870-862-6176LITTLE ROCK RAINEY ELECTRONIS 501-821-4700LITTLE ROCK FASTENAL COMPANY 507-454-5374

CALIFORNIA (NORTHERN)AUBURN EXCITERS GRAPHICS 530-823-6241BENICIA CALIFORNIA SIGN SUPPLIES 707-746-5300BENICIA INTERSTATE ELECTRIC COMPANY 707-747-5115CONCORD DENCO SALES COMPANY 925-822-0000CONCORD MONTROY SUPPLY COMPANY 925-827-4751DUBLIN TAP PLASTICS 925-829-4889EL CERRITO TAP PLASTICS 510-525-3508FRESNO RESTYLERS CHOICE 559-274-0951FRESNO DENCO SALES COMPANY 559-454-5095FREMONT PROFESSI0NAL DECAL INSTALLERS 510-790-2080FREMONT TAP PLASTICS 510-796-3550MANTECA TAP PLASTICS 209-957-2036MOUNTAIN VIEW TAP PLASTICS 650-962-8430OAKLAND REGAL PIEDMONT PLASTICS 510-746-2200PLEASANT HILL TAP PLASTICS 925-798-0420SACRAMENTO TAP PLASTICS 916-429-9551SACRAMENTO TAP PLASTICS 916-481-7584SACRAMENTO BANNER SOLUTIONS AR SIGN & SUPPLY CO 916-452-6928SACRAMENTO PRODUCT SIGN SUPPLY 916-481-7584SACRAMENTO FASTENAL COMPANY 507-454-5374SAN FRANCISCO TAP PLASTICS 415-864-7360SAN JOSE PRODUCT SIGN SUPPLY 408-294-5823SAN JOSE TAP PLASTICS 408-265-6400SAN JOSE TAP PLASTICS 408-292-8685SAN JOSE GE POLYMERSHAPES 408-432-3800SAN JOSE TAP PLASTICS 209-937-9300SAN LEANDRO TAP PLASTICS 510-357-3577SAN LEANDRO TUBELITE CO INC 510-483-8553SAN MATEO TAP PLASTICS 650-344-7127SAN RAFAEL TAP PLASTICS 415-454-6393SANTA ROSA TAP PLASTICS 707-544-5772SUISUN CITY NORTH BAY DISTRIBUTORS 707-427-8011WEST SACRAMENTO MONTROY SUPPLY COMPANY 916-372-1501

CALIFORNIA (SOUTHERN)AGOURA INDUSTRIAL SIGN & GRAPHICS 310-376-8271ALISO VIEJO INTERGRAF 949-951-6358ANAHEIM MCLOGAN SUPPLY COMPANY 714-999-1194BREA N GLANTZ & SON 714-996-9401BUENA PARK SIGN SUPPLY USA 714-522-2400CARSON JOHNSON WINDOW FILM INC 310-631-6672CATHEDRAL CITY REGAL PLASTIC SUPPLY CO 760-324-7036CHINO DENCO SALES COMPANY 909-364-8517COMMERCE INTERSTATE ELECTRIC CO 323-803-2000

CALIFORNIA (SOUTHERN)COMMERCE MONTROY SUPPLY COMPANY 714-449-5954EL CAJON MONTROY SUPPLY COMPANY 619-258-6960GLENDALE SUNTEK WEST 818-239-3886HUNTINGTON BEACH KEG GRAPHICS INC 714-841-1131IRVINE ROLAND DIGITAL GROUP 949-727-2100LA MIRADA REGAL PIEDMONT PLASTICS 562-404-4014LONG BEACH COMMERCIAL SIGN SUPPLY 562-590-0347LOS ANGELES FASTENAL COMPANY 507-454-5374LOS ANGELES MCLOGAN SUPPLY COMPANY 213-749-2262LOS ANGELES SCENIC INDUSTRIAL 213-747-1753LOS ANGELES WEST COAST SIGN SUPPLY 213-487-6666MONTCLAIR S & W PLASTICS 909-621-4887MONTEBELLO MONTROY SUPPLY COMPANY 323-888-2129 MURRIETA GRAPHICS PRODUCTION TECH 951-304-2240NATIONAL CITY N GLANTZ & SON 619-336-1121ONTARIO S & W PLASTICS 909-390-0090ORANGE SIGN MART 714-532-7100OXNARD S & S SUPPLIES 805-988-1061OXNARD SUPERIOR SANITARY SUPPLIES 805-483-3550RIVERSIDE S & W PLASTICS 909-781-4950SAN DIEGO MCLOGAN SUPPLY CO 619- 595-0270SAN DIEGO VISUAL SYSTEMS SIGN SUPPLY 858-278-0582SAN DIEGO GE POLYMERSHAPES 858-693-0115SAN DIEGO REGAL PIEDMONT PLASTICS 858-549-5150SANTA ANA MONTROY SUPPLY COMPANY 714-429-0650SANTA ANA SOUTHLAND SIGN SUPPLIES 714-668-9002SAN BERNADINO S & W PLASTICS 909-824-9643SANTA CLARITA CREATIVE GRAPHIC SERVICES 661-298-3200SANTA FE SPRINGS FELLERS 562-903-2224VAN NUYS ORDWAY SIGN SUPPLY 818 908-9666

COLORADOAURORA ABC MOLDING & SIGN SUPPLY 303-453-7088COLORADO SPRINGS REGAL PIEDMONT PLASTICS 719-475-9701DENVER DENCO SALES COMPANY 303-733-0607DENVER FASTENAL COMPANY 507-454-5374DENVER GE POLYMERSHAPES 303-744-3700DENVER SINAGE SPECIALISTS 303-733-6671DENVER SIGN SUPPLY USA WEST 303-371-1200ENGLEWOOD FELLERS 303-806-0337LITTLETON REGAL PIEDMONT PLASTICS 303-794-9823

CONNECTICUT BETHEL GRIMCO INC 203-743-4105BRIDGEPORT US HIGHWAY PRODUCTS 800-883-8363DANBURY ADHESIVE TAPES INTERNATIONAL 203-792-8279EAST HARTFORD GARSTON INC 860-289-3040HAMDEN GE POLYMERSHAPES 203-248-1641NEW BRITAIN SIGN PRO INC 860-829-1812

FLORIDAAPOPKA TUBELITE COMPANY INC 407-884-0477BROOKSVILLE AUTO TRIM EXPRESS 352-799-0180BROOKSVILLE COASTAL PLASTICS & SUPPLY 352-597-8699BROOKSVILLE AMBER SUPPLY 352-596-7196CLEARWATER GE POLYMERSHAPES 727-573-3535CLEARWATER FARCO PLASTICS SUPPLY, INC 727-572-7722CLEARWATER FLORIDA GRAPHICS SUPPLY 727-461-7600CRYSTAL RIVER ONE STOP SIGN SUPPLY 866-483-3304DAVIE ACTION SIGN SUPPLY 305-593-5366FORT LAUDERDALE FARCO PLASTICS SUPPLY, INC 954-486-7660FORT LAUDERDALE GRIMCO INC 954-316-4716HYPOLUXO EXOTIC INC 561-585-9200JACKSONVILLE GE POLYMERSHAPES 904-354-2000JACKSONVILLE RESTYLER’S CHOICE 904-378-0019JACKSONVILLE FARCO PLASTICS SUPPLY, INC 904-260-8791JACKSONVILLE FELLERS 904-739-1057JACKSONVILLE GRIMCO INC 904-733-6007LARGO GRIMCO INC 727-531-9303LAKELAND DOUGLASS SCREEN PRINTING 863-687-8545LAKE CITY SIGN DISTRIBUTORS CO. INC 386-755-3856MIAMI TUBELITE COMPANY INC 305-883-9070MIAMI FASTENAL COMPANY 507-454-5374MIAMI LAKES GE POLYMERSHAPES 305-817-8786ORLANDO FREDDIES PLASTICS 407-841-4004ORLANDO FARCO PLASTICS SUPPLY, INC 407-888-2108ORLANDO GE POLYMERSHAPES 407-851-0624ORLANDO SIGN SUPPLY USA 800-813-3626

DISTRIBUTORS


FLORIDAORLANDO SUN SHARP SUPPLY EAST 407-299-6655ORLANDO N GLANTZ & SON 407-650-9404ORLANDO THE LIGHTSHIP GROUP 407-363-7777ORLANDO GRIMCO INC 800-266-4078PENSACOLA GE POLYMERSHAPES 850-474-0556PENSACOLA SIGN SUPPLY USA 850-476-2211PINELLAS PARK NESTOR SALES CO. INC 727-544-6114PLANT CITY FREDDIES PLASTICS 813-754-5567POMPANO BEACH SIGN SUPPLY USA 954-974-7787POMPANO BEACH PENN INDUSTRIES 954-971-5099RIVERA BEACH GE POLYMERSHAPES 561-845-9600ST. PETERSBURG DIAMOND NEON SUPPLY 727-526-4000STUART GRAPHIC DESIGN INT’L. INC 561-287-0000TAMPA ADVANTAGE SIGN SUPPLY 813-627-8700TAMPA SUN SHARP SUPPLY 813-628-0773TAMPA GE POLYMERSHAPES 813-621-4703TAMPA FELLERS 813-885-2916TAMPA SIGN SUPPLY USA 813-882-4422WEST PALM BEACH SIGN SUPPLY USA 561-615-8797

GEORGIAAUSTELL GE POLYMERSHAPES 770-944-6114COVINGTON LEP SOLUTIONS 770-788-8668DORAVILLE FELLERS 770-448-1329KENNESAW SIGN SUPPLY USA 800-645-6039MARIETTA GRIMCO INC 678-581-1365MARIETTA ADVANCED SIGN PRODUCTS 770-956-7708 MARIETTA SIGN SUPPLY USA 770-955-2737MONROE ALCOVY SIGN PROFESSIONALS 770-266-6848NORCROSS N GLANTZ & SON 770-300-0008NORCROSS REECE SUPPLY COMPANY 770-326-7920KENNESAW SIGN SUPPLY USA 800-645-6039TUCKER NEON ENGINEERING 770-936-6366LITHIA SPRINGS ADVANTAGE SIGN SUPPLY 678-945-7737

HAWAIIHONOLULU ONE SHOT SUPPLIES 808-841-7683HONOLULU FASTENAL COMPANY 507-454-5374

IDAHOBOISE FASTENAL COMPANY 507-454-5374BOISE GE POLYMERSHAPES 208-232-2181BOISE DENCO SALES COMPANY 208-375-0100POCATELLO AMERIGO INC 208-232-2181

ILLINOISBERWYN ORDWAY SIGN SUPPLY 708-795-7446CHICAGO FASTENAL COMPANYCHICAGO MID WEST NEON SUPPLY 773-588-0523CHICAGO RAYCO PAINT COMPANY 773-267-5200ELK GROVE VILLAGE FELLERS 847-758-1229ELMHURST GRIMCO, INC 630-530-7756LISLE PRODUCTION PLUS GRAPHICS 630-737-1948MARION AUTO TRIM DESIGN 618-997-7845MELROSE PARK NEON MATERIALS COMPANY 708-681-3311NAPERVILLE GE POLYMERSHAPES 630-428-4350ROSEMONT INTERNATIONAL NEON 773-992-3000SCHAUMBURG ADVANTAGE SIGN SUPPLY 847-781-0690SCHILLER PARK GE POLYMERSHAPES 847-671-3444SCHILLER T & M SIGN SUPPLY 847-671-7744SPRINGFIELD NEON & FLUORESCENT SUPPLY 314-533-0744VILLA PARK SIGN SUPPLY USA 630-782-5600WEST CHICAGO SPECIALTY GRAPHICS SUPPLY 630-639-5039WOOD DALE EARL MICH COMPANY 630-616-9000

INDIANAAVON ABSOLUTE SIGN SUPPLY 317-272-9448ELKHART INDUSTRIAL FINISHES 574-293-9920ELKHART GE POLYMERSHAPES 574-389-1949HOBART EXPRESS AUTO SUPPLY 219-942-1164INDIANAPOLIS GE POLYMERSHAPES 317-634-4521INDIANAPOLIS TUBELITE COMPANY INC 317-352-9366INDIANAPOLIS MEYER PLASTICS INC 317-259-4131INDIANAPOLIS LEE’S SIGN SUPPLY 269-684-7080INDIANAPOLIS FOCAL CONCEPTS 317-227-0022INDIANAPOLIS ACCENT DISTRIBUTING 317-351-0011INDIANAPOLIS CENTRAL BANNER SUPPLY 317-271-1540INDIANAPOLIS GRIMCO INC 317-244-2263

INDIANA CONT.INDIANAPOLIS NAZDAR / NDS INC 317-484-4500INDIANAPOLIS FELLERS 317-876-3008INDIANAPOLIS N. GLANTZ & SON 317-388-7050INDIANAPOLIS ADVANTAGE SIGN SUPPLY 317-871-3040MIDDLEBURY JULIUS BARTH & ASSOCIATES 574-825-2323LAFAYETTE MEYER PLASTICS 765-447-2195LAFAYETTE LH INDUSTRIAL SUPPLIES 765-449-1203 IOWACEDAR FALLS MIDWEST FIBERGLASS 319-232-1268COUNCIL BLUFFS AKSARBEN SEWING & SUPPLY 712-325-4103DAVENPORT TNT DETAILING 563-322-9968DAVENPORT WENSCO 800-382-4441DES MOINES AMERITECH SIGN SUPPLIES 515-244-6248DES MOINES CENTRAL SIGN SUPPLIES INC 515-263-1390

KANSASBUHLER GREGORY INC 316-543-6657LENEXA FELLERS 913-492-0531 LENEXA SIGN SUPPLY USA SHAWNEE NAZDAR 913-422-1888WICHITA GRAPHIC SYSTEMS INC 316-267-4171

KENTUCKYLOUISVILLE AMERICAN LUMBER PRODUCTS 502-637-5079 LOUISVILLE N. GLANTZ & SON 317-388-7050LEXINGTON GE POLYMERSHAPES 859-253-1515NICHOLASVILLE SSK SIGN SUPPLY 859-881-8039PADUCAH AUTO TRIM DESIGN 270-443-4801

LOUISIANNABATON ROUGE LAMAR GRAPHICS 225-923-3113BATON ROUGE FELLERS 225-755-6063BATON ROUGE REGAL-CHAMPION PLASTICS 225-275-2010CHALMETTE TRI PARISH SALES, INC 504-277-1996HARAHAN REECE SUPPLY COMPANY 504-733-7799METAIRIE GE POLYMERSHAPES 504-834-6222MONROE SOUTHERN ABRASIVES 318-387-8311SHREVEPORT REGAL PLASTICS SUPPLY 318-635-0561

MAINE WESTBROOK PLASTIC SUPPLY INC 207-775-7778

MARYLANDBALTIMORE FELLERS 410-737-6661GLEN BURNIE N. GLANTZ & SON 410-766-4526JESSUP GE POLYMERSHAPES 301-604-3623JESSUP GRIMCO INC 301-490-1844LINTHICUM PIONEER SUPPLY COMPANY 866-880-5531ROCKVILLE FELLERS 301-309-1921SUDLERSVILLE HARBOR SALES 800-345-1712

MASSACHUSETTSDEVANS GE POLYMERSHAPES 978-772-5900HAVERHILL GARSTON INC 978-374-0600WAKEFIELD SUPPLIES UNLIMITED 781-295-0031WALTHAM ADVANTAGE SIGN SUPPLY 781-899-3117WOBURN FELLERS 781-935-0151WOBURN GE POLYMERSHAPES 781-937-0034WOBURN NEW ENGLAND SIGN SUPPLY 781-938-1498

MICHIGANBELMONT WENSCO 616-785-3333BRIGHTON GE POLYMERSHAPES 810-844-0776GRAND RAPIDS ADVANTAGE SIGN SUPPLY 616-554-3300HOLLAND STREAMLINE DESIGN.COM 616-395-2051KALAMAZOO GE POLYMERSHAPES 269-276-9825KALAMAZOO AUTO TRIM DESIGN 269-375-1331 SOUTHFIELD GE POLYMERSHAPES 248-392-4000MADISON HEIGHTS GE POLYMERSHAPES 248-616-0300LIVONIA ROUSH INDUSTRIES, INC 734-466-6214LIVONIA WENSCO 800-253-1569NILES LEE’S SIGN SUPPLY 269-684-7080PLYMOUTH JACK RIPPER & ASSOCIATES 734-453-7333OAK PARK FELLERS 248-545-8406ROCKFORD RICHARDS DISTRIBUTING INC 616-754-4669SWARTZ CREEK ONE SOURCE 810-635-8844SWARTZ CREEK PRINTERS RESOURCE 810-635-8844TRAVERSE CITY TOPLINE USA 231-941-0800

DISTRIBUTORS


MINNESOTAARDEN HILLS ADVANTAGE SUPPLY INC 651-636-8668BROOKLYN PARK GE POLYMERSHAPES 763-315-9184FAIRMONT DESIGNING SIGNS 507-238-2112GRAND MEADOW FEATHER LITE GRAPHICS 507-754-5876EAGMAN VITAL PRESENTATION CONCEPTS 651-322-4500ELK RIVER XPRESS GRAPHICS / MOTION PRODUCTS 763-633-0723GOLDEN VALLEY N. GLANTZ & SON 763-544-5959NEW HOPE CREATIVE BANNERS 763-278-6487ROGERS SIGNS PLUS BANNERS 763-428-6090

MISSISSIPPIJACKSON CUSTOM PRODUCTS CORP 601-932-5854

MISSOURI BRIDGETON GE POLYMERSHAPES 314-738-0088CAPE GIRAREAU AUTO TRIM DESIGN 573-334-9161GLADSTONE CARREL BROTHERS DIST 816-468-1600KANSAS CITY GRIMCO INC 816-231-9903 KANSAS CITY N. GLANTZ & SON 816-483-2100LAKE OZARK RAPID SIGNS 573-365-8900OWENSVILLE GRIMCO INC 573-437-2115RIVERSIDE GE POLYMERSHAPES 816-746-6696ROLLA AERO GRAPHIX 573-467-0111SPRINGFIELD UNITED PLASTICS INDUSTRIES 417-732-1658SPRINGFIELD NEON & FLUORESCENT SUPPLY 417-863-6551ST. LOUIS STANDARD NEON SUPPLY 314-993-9128ST. LOUIS NEON & FLUORESCENT SUPPLY 314-533-0744ST. LOUIS R & J SIGN SUPPLY CO 314-664-8100

MONTANABILLINGS MONTANA MOULDING & SIGN SUPPLY 406-652-3545BABB EXPRESS SIGN PRODUCTS 403-627-4530

NEW HAMPSHIREGILFORD GATOR INC 603-293-7344MANCHESTER GE POLYMERSHAPES 603-627-7673

NEBRASKAOMAHA CENTRAL SIGN SUPPLIES INC 402-734-3160

NEVADA LAS VEGAS BRON TAPES OF NEVADA, LLC 702-248-1200LAS VEGAS FELLERS 702-736-3500 LAS VEGAS GE POLYMERSHAPES 702-732-8866LAS VEGAS INTERSTATE ELECTRIC COMPANY 702-795-2233LAS VEGAS MONTROY SUPPLY COMPANY 702-362-6002LAS VEGAS SOUTHLAND SIGN SUPPLIES 702-364-1154RENO TRIPP PLASTICS 775-348-6676SPARKS MONTROY SUPPLY COMPANY 775-331-1002SPARKS TRIPP PLASTICS 775-355-7552 NEW JERSEYBERKELEY HEIGHTS CREATIVE VISUAL SYSTEMS 908-665-9770FAIRFIELD N. GLANTZ & SON 973-439-1151MOONACHIE TUBELITE COMPANY INC 201-641-6660NORTHVALE DIMENSIONAL COMMUNICATIONS 201-767-1500PATERSON XCALIBER/MR J. DESIGNS 973-278-1611PENNSAUKEN METRO SIGN SUPPLY 856-910-0700SADDLEBROOK SIGN SUPPLY USA 201-797-7880SOMERVILLE BEACON GRAPHIC SYSTEMS 908-231-8077TETERBORO FELLERS 201-288-3841

NEW MEXICOALBUQUERQUE DENCO SALES COMPANY 505-830-0212ALBUQUERQUE NEW MEXICO SIGN SUPPLY 505-344-2869ALBUQUERQUE REGAL PIEDMONT PLASTICS 505-884-2651

NEW YORKBROOKLYN S & F SUPPLIES 718-399-3333BROOKLYN N. GLANTZ & SON 800-221-6140BUFFALO HYATT’S GRAPHIC SUPPLY 716-884-8900BUFFALO N. GLANTZ & SON 716-877-8910FARMINGDALE GE POLYMERSHAPES 607-293-9090FRANKFORT FERDULA AUTOMOTIVE 315-894-4143HICKSVILLE GE POLYMERSHAPES 718-849-8100ROCHESTER GARSTON INC 585-321-1610

NEW YORK CONT.ROCHESTER DIAMOND SHIELD 585-454-1950ROCHESTER GE POLYMERSHAPES 585-254-5800SYRACUSE GE POLYMERSHAPES 315-422-9165SYRACUSE VIZ TEK SOLUTIONS INC 315-437-4442

NORTH CAROLINACHARLOTTE DIAMOND SUPPLY 704-376-7437CHARLOTTE GE POLYMERSHAPES 704-509-5711CHARLOTTE FELLERS 704-665-7980CHARLOTTE TUBELITE COMPANY INC 704-875-3117CHARLOTTE DIXIE NEON SUPPLY 704-588-2565GREENSBORO CORNERSTONE VINYL & SIGN SUPPLY 336-370-1002GREENSBORO GRIMCO INC 336-292-0561HUNTERSVILLE GE POLYMERSHAPES 888-848-8203RALEIGH EXPERT SIGN SUPPLY 919-773-3085RALEIGH GE POLYMERSHAPES 919-212-1014SELMA PHASE II GRAPHICS 919-965-2062

NORTH DAKOTAFARGO FAR FROM NORMAL GRAPHIC SUPPLY 701-235-1089

OHIOBARBERTON ADVERTISING IDEAS COMPANY 330-745-4489BROOKLYN HEIGHTS GE POLYMERSHAPES 216-749-6770CINCINNATI SCHAAF COMPANY, INC 513-241-7044CINCINNATI RESTYLERS’ CHOICE 513-588-3700CINCINNATI SPARKLING CARBONIX, INC 513-773-8786CINCINNATI NEON ENGINEERING 513-681-3300CINCINNATI CINCINNATI SIGN SUPPLIES 513-242-1500CINCINNATI GE POLYMERSHAPES 513-936-9666CLEVELAND BYRNE SIGN SUPPLY 216-781-4340CLEVELAND HORIZONS 216-475-0555COLUMBUS FELLERS 614-274-5041COLUMBUS TUBELITE COMPANY INC 614-443-9734COLUMBUS DESIGN IMPRESSIONS 614-237-4474COLUMBUS GRIMCO INC 614-777-4800DAYTON GE POLYMERSHAPES 937-276-3921DUBLIN PERFORMANCE FILM DIST 614-766-4602KENT KAPCO 330-678-1626MAUMEE GE POLYMERSHAPES 419-482-0962 MIDDLEBURG HGTS SIGN SUPPLY USA 800-545-7818SHARONVILLE DESIGN IMPRESSIONS 800-536-3321SOLON GRIMCO INC 440-519-1480WARRENSVILLE HGTS DESIGN IMPRESSIONS 216-662-3338WARRENSVILLE HGTS N. GLANTZ & SON 216-587-6413WORTHINGTON FASTENIT SUPPLY 614-581-1818YOUNGSTOWN GREAT LAKES GRAPHICS 330-747-6139YOUNGSTOWN PERKINS ART & SIGN SUPPLY 330-746-0000ZANESVILLE ARTISTIC DESIGN SYSTEMS 740-453-1272

OKLAHOMAOKLAHOMA CITY PENN INDUSTRIES 405-232-8545BROKEN ARROW CHAMBER SIGN & SUPPLY 918-251-6513BROKEN ARROW GE POLYMERSHAPES 918-259-5609TULSA N. GLANTZ & SON 918-438-7447TULSA FELLERS 918-621-4400TULSA GT INDUSTRIES OF OKLAHOMA 918-627-6600TULSA REECE SUPPLY COMPANY 918-556-5000

OREGONBEAVERTON INDUSTRIAL FINISHES 503-644-3767BEND INDUSTRIAL FINISHES 541-388-7372COOS BAY INDUSTRIAL FINISHES 541-269-0616EUGENE INDUSTRIAL FINISHES 541-485-1503EUGENE MULTI-CRAFT PLASTICS, INC 541-485-1727GRANTS PASS AUTOMOTIVE PAINT SPECIALTIES 541-479-5517GRESHAM INDUSTRIAL FINISHES 541-666-5606GRESHAM TRIM WEST DISTRIBUTING 503-663-6432MCMINNVILLE PACIFIC REFLEX SIGNS 503-434-4435MEDFORD INDUSTRIAL FINISHES 541-772-6238PORTLAND INDUSTRIAL FINISHES 503-234-9795PORTLAND SUN SUPPLY 503-222-5080PORTLAND DENCO SALES CO 503-235-0460PORTLAND NORTHWEST SIGN SUPPLY 503-233-0111PORTLAND GE POLYMERSHAPES 503-255-5288PORTLAND WELLINGTON HOUSE 503-661-8693PORTLAND TAP PLASTICS 503-230-0770PORTLAND INDUSTRIAL FINISHES 503-788-7243

DISTRIBUTORS


OREGON CONT.ROSEBURG HANDYMAN HARDWARE 541-672-5811ROSEBURG INDUSTRIAL FINISHES 541-673-3707SALEM INDUSTRIAL FINISHES 503-371-3032TIGARD MULTI-CRAFT PLASTICS, INC 503-352-0970TIGARD TAP PLASTICS 503-620-4960

PENNSYLVANIAALLENTOWN GE POLYMERSHAPES 610-391-3050ALLENTOWN MG APPEARANCE PRODUCTS, LLC 610-433-7373CHALFONT KARAS AUTOMOTIVE 215-822-8989DOYLESTOWN ADVANTAGE PRODUCTS 215-348-0119FREEDOM GE POLYMERSHAPES 724-775-9025MONROEVILLE N. GLANTZ & SON 412-372-8110NORTHERN CAMBRIA WEST BRANCH MATERIALS 814-948-8899PHILADELPHIA SAM SCHWARTZ INC 215-744-9996PHILADELPHIA N. GLANTZ & SON 215-338-2297PHILADELPHIA FELLERS 215-969-2515PIPERVILLE EAST COAST SIGN SUPPLY 215-766-9780PITTSBURGH TONAS GRAPHICS 412-937-1600PITTSBURGH PIONEER SUPPLY CO. INC 412-471-5600POTTSTOWN ADVANTAGE SIGN SUPPLY 610-495-0071QUAKERTOWN VINYL SIGN SUPPLIES 215-536-7344TREVOSE GE POLYMERSHAPES 215-638-9460 RHODE ISLANDWARWICK GE POLYMERSHAPES 401-734-9300EAST PROVIDENCE NEPCO PRODUCTS 401-438-4550

SOUTH CAROLINACOLUMBIA GE POLYMERSHAPES 803-254-0550COLUMBIA P & L DISTRIBUTING 803-957-4551GREENVILLE AVAILABLE SIGN COMPANY 864-284-6955NORTH CHARLESTON IMAGING SUPPLY SOLUTIONS 843-554-2007MT. PLEASANT REGIONAL GRAPHICS SUPPLY 843-856-0022

SOUTH DAKOTANORTH SIOUX CITY FAR FROM NORMAL 605-780-0210SIOUX FALLS DAKOTA SIGN SUPPLY 605-332-3371

TENNESSEE CHATTANOOGA DIVERSIFIED SIGN SUPPLY 800-635-5586HIXSON GRAPHIC SOLUTIONS INC 423-876-9663KINGSPORT GE POLYMERSHAPES 423-392-4000KNOXVILLE GE POLYMERSHAPES 865-637-1000MEMPHIS TUBELITE COMPANY INC 901-396-8320MEMPHIS FELLERS 901-362-3775MEMPHIS FARCO PLASTICS SUPPLY, INC 901-332-3331MEMPHIS GE POLYMERSHAPES 901-795-1558NASHVILLE ADVANCED PLASTICS 615-350-6500 NASHVILLE CUSTOM BANNERS & SIGN SUPPLIES 615-613-0204NASHVILLE NAZDAR 800-926-0946WHITEHOUSE ARTIST WORKS 615-672-3029

TEXASAMARILLO ABC BLUEPRINTS 860-376-5671ARLINGTON BRON TAPES 817-640-9998ARLINGTON RESTYLERS’ CHOICE 817-261-3800AUSTIN FELLERS 512-821-0500AUSTIN REGAL PLASTICS SUPPLY 512-836-3629CARROLLTON GRIMCO INC 972-466-1700COPPELL GE POLYMERSHAPES 972-304-2525DALLAS SIGN SUPPLY USA 214-350-1963DALLAS GRAPHIC SOLUTIONS GROUP INC 214-748-3271DALLAS REGAL PLASTICS SUPPLY 972-484-0741DALLAS FELLERS 214-358-5163DALLAS N. GLANTZ & SON 214-634-0700EL PASO PROFORM PLASTICS & ADHESIVES 915-593-3200EL PASO ALAMO TRIM INDUSTRIES 915-781-0500EL PASO REGAL PIEDMONT PLASTICS 915-593-1373EL PASO REECE SUPPLY COMPANY 877-776-0128FORT WORTH REGAL PLASTICS SUPPLY 817-429-0366GARLAND PENN INDUSTRIES 972-840-6191HOUSTON REECE SUPPLY COMPANY 713-228-9496HOUSTON WEBER SUPPLY COMPANY 713-224-4946HOUSTON FELLERS 800-654-8405HOUSTON SUNTEK SOUTH 713 461-2204HOUSTON GRIMCO INC 713-682-1875HOUSTON REGAL PLASTICS SUPPLY 713-957-8541

TEXASIRVING REECE SUPPLY COMPANY 972-438-3131IRVING ADVANTAGE SIGN SUPPLY 469-417-7840MIDLAND A-1 DISTRIBUTOR 915-682-0083SAN ANTONIO HERWECKS 210-227-1349SAN ANTONIO TSM DIGITAL PRINTING 210-737-5900SAN ANTONIO N. GLANTZ & SON 210-946-6633SAN ANTONIO REGAL PLASTICS SUPPLY 210-599-8291SAN ANTONIO REECE SUPPLY COMPANY 210-662-6898SOUTH HOUSTON GE POLYMERSHAPES 713-947-0134 UTAHSALT LAKE CITY MONTROY SUPPLY 801-954-8900SALT LAKE CITY GE POLYMERSHAPES 801-266-9899SALT LAKE CITY REGIONAL SUPPLY COMPANY 801-262-6451

VERMONTEAST PROVIDENCE NEPCO PRODUCTS 401-438-4550

VIRGINIAASHLAND ADVANTAGE SIGN SUPPLY 804-798-5784BRISTOL MUMPOWER SIGN SUPPLY 276-466-5543CHESAPEAKE CORNERSTONE SIGN SUPPLY 757-366-0035CHESAPEAKE N. GLANTZ & SON 757-487-5300MARTINSVILLE INDUSTRIAL FINISHES 276-634-5044NORFOLK COMMERCIAL PLASTICS & SUPPLIES 757-623-3388RICHMOND GE POLYMERSHAPES 804-353-0090ROANOKE BUDGET SIGN & SUPPLY 540-362-2043ROANOKE LAWRENCE TRANS. SYSTEMS 540-966-4000 VIRGINIA BEACH D & L SUPPLY 757-306-9400

WASHINGTONBELLEVUE TAP PLASTICS 425-861-0940KENT WESTERN WHOLESALE SUPPLY 425-656-3600KINGSTON PERFORMANCE SIGN PRODUCTS 360-394-1919SEATTLE DENCO SALES COMPANY 206-764-9180SEATTLE NORTHWEST SIGN SUPPLY 206-767-9592SEATTLE TAP PLASTICS 206-389-5900 SPOKANE NORTHWEST SIGN SUPPLY 509-927-7943TUKWILA FELLERS 206-575-4033SEATTLE GE POLYMERSHAPES 206-575-1462VANCOUVER INDUSTRIAL FINISHES 360-573-3855WALLA WALLA GENERAL PARTS 509-522-2022

WISCONSINAPPLETON AUTO TRIM DESIGN 920 585-2525GREEN BAY FASTENAL COMPANY 920-983-9900MENOMONEE FALLS GE POLYMERSHAPES 262-251-1200NEENAH MOTION PRODUCTS 920-725-4688NEW BERLIN FELLERS 262-784-5854OOSTBURG VINYL GRAPHICS 920-564-2181PRESCOTT MIDWEST PRODUCTS COMPANY 866-662-4082WAUWATOSA N. GLANTZ & SON 414-259-1331

INTERNATIONAL

ARGENTINABUENOS AIRES IMPORT FILMS SA 011541-931-4427

BRAZILSAO PAULO CAS SUPRIMENTOS 55-11-815-9458

CANADAKAMLOOPS, BC RAPID TAC OF CANADA 1-800-561-6422

COSTA RICAESCAZU DESAS Y COMPANIA SA 011506-228-8837

IRELANDDUBLIN D O’SULLIVAN PRINT SUPPLIES LTD 0 1 4098000

JAPANKANAGAWA F.E.TRADE CO LTD 81-0466-50-2422

NETHERLANDSODIJK SIGN TOP 01131-306-56-6120

UNITED KINGDOMSLOUGH ALL PRINT SUPPLIES, LTD 00 44 (0) 1753 696977

rapid tac inc. - categories - -sign supplies and … to use rapid tac, rapid tac ii and the cheapest...

Documents