tonzze international limited - finishing talk international limited . ... machine, hardware, mobile...
TRANSCRIPT
香港东之泽国际有限公司 Tonzze International Limited
东莞市凤岗东之泽机械厂 Dongguan City Fenggang Tonzze Machinery Factory
FFiinnee PPoolliisshhiinngg MMaacchhiinneess
Professional Grinding Technology http://www.tonzze.cn http://www.tontse.cn http://www.dzgr.com
Model: TT-8300, TT-860, TT-848, TT-845, TT-835
The magnetic grinders use the magical force of magnetic field to make the
stainless steel grinding pins spin very fast, and the grinding pins de-burr, polish
and clean the work-pieces very effectively and precisely.
Application:
⊙ Suitable for de-burring (de-flashing), polishing and cleaning big or small non-magnetic metal parts of machine, hardware, mobile phone, laptop, camera, eyeglass, etc. such as rigid plastic, nonferrous metal [e.g. stainless steel, copper & brass, aluminum, zinc, magnesium, tin, gold, silver, etc.]
⊙ De-burring, polishing and cleaning metal work-pieces ⊙ Removing small burrs and scraps in the inner holes, openings, cracks, blind holes, tapping holes and inner
or outer screw threads. ⊙ Removing rust and surface oxide layer on the metal work-pieces and polishing the work-pieces
Features:
● Short time of grinding, it only takes 5~15 minutes for each grinding or polishing. Working efficiently. ● Low cost. The stainless steel pins are permanent abrasives; it can be used many times. The only consumable
item is Grinding (Brightening) Fluid. Grinding fluid contains moisture 95%, and is non-toxic, non-polluting. You have no worry about fire on it. The fluid is concentrated, only 10~50 ml is needed for each grinding.
● Simple operation. Just set the machine program and the machine runs automatically. ● After grinding, cleaning or polishing, the work-pieces will NOT get deformed, NOT get damage to the
surface, and the accuracy is NOT affected.
TT-8300 Auto Magnetic Grinder Suitable for grinding & polishing extra-large work-pieces
PPRREECCIISSIIOONN MMAAGGNNEETTIICC GGRRIINNDDEERRSS
( Magnetic De-burring & Polishing Machines )
An Excellent Tool For De-Burring, Polishing And Cleaning Precision Parts
● The clamps of the machine are to be customized according to the work pieces. The machine is running circularly and automatically. Model TT-8300 Power 3 PH 380V 32A
Size L× W× H (mm) 3500× 1000× 1600
Trough Size L× W (mm) 3000× 560
Standard
Allocation
●ONE magnetic grinder ● Concentrated grinding fluid 50KG ●Stainless steel pins 20KG (Standard Size) ● ONE manual ●ONE plastic container ● ONE set of sieve
Features ★Machine is running automatically
★Auto feeding, discharging, changing water, cleaning
Weight 2000 kg
●Suitable for grinding or polishing materials: stainless steel, copper, aluminum, magnesium, zinc, etc. and their alloys, other kinds of alloys, powder metallurgy, iron, carbon steel, gold, silver, etc.
OPERATION PANEL
● POWER ● START ● STOP
● REV. TIMER ● FWD TIMER ● SPEED SET ● SPEED DISPLAY ● FINISHING ALARM SWITCH
● FINISHING LIGHT ● ERROR INDICATOR
PPRREECCIISSIIOONN MMAAGGNNEETTIICC GGRRIINNDDEERRSS
TT-860 ■ Super large grinding trough designed, suitable for mass grinding, polishing or cleaning
■ Running automatically, one person can operate multiple machines
TT-848 ■ Extra large grinding trough designed, suitable for mass grinding, polishing or cleaning
■ Running automatically, one person can operate multiple machines
TT-845 ■ Large grinding trough designed, suitable for mass grinding, polishing or cleaning
■ Running automatically, one person can operate multiple machines
TT835 ■ Small size with light weight, suitable for polishing small amount of products and sample development.
■ Suitable for small work-pieces or parts in mass production.
Model Size (mm)
L× W× H
Trough Size
L× W (mm) Power Supply Standard Allocation Weight
TT-860 680× 810× 900 600× 600
3PH 380V 13A
Motor: 3.7 KW
●ONE Magnetic grinder ●2 Plastic containers
●Concentrated grinding fluid 25 kg
●Standard size stainless steel grinding pins 8 KG
●ONE set of sieve containers ● One Operation Manual
220KG
★Max. work-pieces to be grinded each time:12 kg
TT-848 600× 750× 820 500× 500
3PH 380V 13A
Motor: 3.7 KW
●ONE Magnetic grinder ●2 Plastic containers
●Concentrated grinding fluid 25 kg
●Standard size stainless steel grinding pins 6 KG
●ONE set of sieve containers ● One Operation Manual
180KG
★Max. work-pieces to be grinded each time:8 kg
TT-845 530× 660× 820 450× 450
1PH 220V 13A
Motor: 1.5 KW
●ONE Magnetic grinder ●2 Plastic containers
●Concentrated grinding fluid 25 kg
●Standard size stainless steel grinding pins 4 KG
●ONE set of sieve containers ● One Operation Manual
120KG
★Max. work-pieces to be grinded each time:6 kg
TT-835
430× 560× 820 350× 350 1PH 220V 10A
Motor:0.75 KW
●ONE Magnetic grinder ●2 Plastic containers
●Concentrated grinding fluid 25 kg
●Standard size stainless steel grinding pins 2 KG
●ONE set of sieve containers ● One Operation Manual
90KG
★Max. work-pieces to be grinded each time:3 kg
A Magical and High-efficient Performance of the Magnetic Force
Accessories: A. Abrasives: Stainless Steel Grinding Pins (SUS magnetizing treatment)
How to choose Grinding Stainless Pins
The bigger the pins are, the better the grinding ability is. Thus, to choose the pins should depend on the softness or hardness of the work-piece material. To choose pins with diameter over Φ0.5mm for Stainless steel or Iron work-pieces; and pins below Φ0.5mm for softer material work-pieces such as copper or aluminum. Of cause the magnetic force of the machine is adjustable, thus you can test for times to get suitable grinding pins.
The holes of the work-pieces decide the big or small, long or short pins to be used. If the cracks into the holes are to be grinded, the 3mm long pin is suggested to be used for better effect.
The stainless steel pins are permanent grinding materials, can be used for many times.
Standard Size
Model S1 S2 S3 S4 S5 S6 S7 S8 S9
Size
Φ× L
Φ0.2×5
mm
Φ0.3×5
mm
Φ0.4×5
mm
Φ0.5×5
mm
Φ0.7×5
mm
Φ0.8×5
mm
Φ1.0×5
mm
Φ1.2×5
mm
Φ1.5× 5
mm
Special Size Special Sizes can be made to order Model P1 P2 P3 P4 P5 P6 P 7 P 8 P9
Size
Φ× L
Φ0.2×3
mm
Φ0.3×3
mm
Φ0.4×3
mm
Φ0.5×3
mm
Φ0.7×3
mm
Φ0.8×3
mm
Φ1.0×3
mm
Φ1.2×3
mm
Φ1.5× 3
mm
PPRREECCIISSIIOONN MMAAGGNNEETTIICC GGRRIINNDDEERRSS
B. Concentrated Grinding Fluid/Polishing Compounds: BGL-7 MODEL Suitable for Materials of Work-pieces
BGL-7
(PH:1~2)
Non-magnetic metals materials such as stainless steel, copper,
aluminum, zinc, gold, silver, etc., and their alloys.
(Please diluted with water by 60 times)
●Kerosene
●Antirust Oil
●Diesel Oil
(Used for de-oiling and preventing from rusting)
Magnetic (rustable) materials such as Iron, Carbon steel, etc.
You can buy these oils yourself if you need.
Function of Grinding Fluids: Rust preventing, Polishing, Cooling, Cleaning, etc.
Grinding lasts for about 30 minutes, the temperature of the grinding fluid in the
machine will be over 70 Centigrade, then please change with cool one. If the work-pieces are too oily, cleaning liquids could be used with the grinding fluids
C. Plastic Containers
Vibratory Sieving Machine
This sieving machine is used for separating materials of different sizes. It is made of stainless steel, and
has different mesh sieves for customs to choose. The mesh sieves can also be custom made. The mesh sieves are made of mesh stainless steel board with outer layer of high abrasion resistant black PU.
Model Size Net Size Power Standard Allocation Weight
DZ-1400
L*W*H mm L*W mm 3-P 380V 6A ONE sieving machine TWO standard size sieves 100kg 1600*680*700 1000*350 2*0.4 KW
Standard Aperture: Φ4、Φ6、Φ8、Φ10、Φ12、Φ15、Φ18 mm
PPRREECCIISSIIOONN MMAAGGNNEETTIICC GGRRIINNDDEERRSS
The vibratory polishing machine has a ring channel to hold abrasives and work-pieces. When the machine is working, it makes three-dimensional high frequency vibration. The grinding stone and the work-pieces are rolling spirally forward and they are grinding each other during the rolling. This makes the work-pieces get de-burred, chamfered, polished and cleaned. To replace the traditional cloth-wheel polishing, it can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production to improve and stabilize the quality of the products.
The machine has a lining made of abrasion-proof PU material which is made by US DuPont Company. The machine can also have a noise isolation cover, and a frequency control of motor speed. It can save electricity by 50% to use the speed control.
Car Wheels Polisher VBC-600
Model VB
25
VB
50
VB
80
VB / VBA / VBZ
150 200 300 450 600 750 1200
Capacity (L) 25 50 80 150 200 300 450 600 750 1200
Size
(mm)
A 800 800 800 920 860 940 1180 1260 1300 1500
BΦ 560 740 850 980 1130 1280 1440 1590 1950 1980
CΦ 180 240 300 350 560 480 560 580 930 950
DΦ 160 220 260 290 270 370 420 480 480 480
Motor Power (kw) 0.75 1.1 1.5 1.5 2.2 3.7 5.0 5.5 7.5 11
Weight (kg) 85 150 220 400 550 700 1000 1200 1500 2000
VViibbrraattoorryy PPoolliisshhiinngg MMaacchhiinneess
VB25/50/80 VB150/200/300/450/600/750/1200 VBA150/200/300/450/600/750/1200
VBZ150 /200 /300 /450 /600 /750 /1200
The rotary disk with four drum bases offset equidistantly in the centrifugal machine orbits around the central main bearing in high speed, It produces powerful centrifugal force while it is turning around; at the same time the four planetary hexagonal drums are driven to spin reversely by the timing belt or nylon gears, making the grinding stones and work-pieces in the drums strongly move and grind or polish each other. The centrifugal grinding machine has a good effect of de-burring, chamfering, polishing and cleaning the work-pieces in a short time; and it can reach a mirror polishing. The inner lining is made of wearable PU produced by US DuPont Company, and it is replaceable. To use the braking motor and the frequency control of motor speed can save electricity by 50%.
CPS-30B CPQ-30B CPG60 /80 /100 /160 /220
Model Capacity Size (mm) Motor Power Weight Speed (rpm) Drum Size Lining Thickness
(L) L*W*H KW KG Convt. Fixed A*B*C (mm) mm
CPS30B/ CPQ30B 30 1000*1000*1200 1.5 350 0~180 180 170*100*300 10
CPG60 60 1200*1100*1430 2.2+0.55 600 0~170 160 210*120*400 10
CPG80 80 1400*1300*1600 3.7+0.55 1000 0~160 160 230*130*430 10
CPG100 100 1500*1500*1800 5.5+0.55 1500 0~160 160 260*180*440 12CPG160 160 1580*1550*1830 5.5+0.55 2100 0~150 150 286*286*536 12
CPG220 220 1860*1600*1980 7.5+0.55 2300 0~150 150 320*320*600 12
CCeennttrriiffuuggaall PPoolliisshhiinngg MMaacchhiinneess
The rotary grinding machine has a fixed trough and a rotary disk. When the rotary disk is rotating, there is an opposite force to make the grinding stones and work-pieces stir and grind in the working unit (barrel). Thus the machine grinds and polishes the surface of the work-pieces in a very short time. The inner lining of the grinding barrel is gear-teeth designed, and the bottom is concave-convex designed. These make the work-pieces and the grinding stones grind better and more efficiently. The inner lining is made of high quality wearable PU produced by US DuPont Company. To use the frequency control of motor speed can save electricity by 50%.
Model Capacity Size (mm) Motor Power Weight Speed Barrel Dia. PU Lining Thickness
( L) L*W*H KW KG rpm mm mm
MPA240 240 3000*2500*1900 7.5 3000 0~140 820 30
MPA120 120 1700*1380*1410 5.5 1100 0~170 690 25
MPS240 240 2480*1500*1400 7.5 3000 0~140 820 30
MPS120 120 1700*1380*1410 5.5 1100 0~170 690 25
MPF120 120 1680*820*1360 4.0 600 50~160 690 25
MPF50 50 1380*550*1100 1.5 400 0~160 480 25
MPB80/MPZ80 80 1600*750*1250 2.2 500 50~180 590 25
MPB50/MPZ50 50 1000*650*1120 1.5 300 0~180 480 25
RRoottaarryy GGrriinnddiinngg MMaacchhiinneess
MPZ50/ 80/ 120 (Auto Discharging)
MPA120/ MPA240 Full Automatic MPB50/ 80 (Manual Discharging)
MPF50 /120 (Manual Discharging) MPS120 /240 Semi-automatic
The drum-type polishing machine is suitable for metal work-pieces surface treating. It can improve the glossiness of work-pieces, and effectively de-burr the work-pieces. The machine has a structure of axle and drum. The drum body is hexagonal and made of acrylics (Organic Glass), which is clear and safe. The drum can grind, polish and clean the work-pieces in a high effect, and it is easy to open or lock the drums. The machine is easy and convenient to use.
The drum-type polishing machine has a particular axle to drive the drum. It is easy to use with a step-less speed adjusting motor (0~1200r/m). It can greatly keep the accuracy of the parts, and improve the brightness without deforming the work-pieces. To use the Frequency control of motor speed can save electricity by 50%.
Model Capacity Size (mm) Power Weight Speed (rpm) Drum Size Lining Thickness
L L*W*H KW KG Convt. Fixed A*B*C (mm) mm
DZO30-7L 7 490*330*500 0.37 55 0~100 100 100*300*320 10
DZO30-14L 14 490*330*530 0.37 65 0~100 100 240*300*320 12
DZT30-14L 14*2 880*350*650 0.75 80 0~100 100 240*300*320 12
DZ100 100 1160*800*1100 1.1 300 0~120 120 830*440*180 10
DZ200 200 1300*800*1300 2.2 350 0~120 120 930*540*220 10
DZ300 300 1380*1050*1440 3 400 0~120 120 960*620*260 10
DDrruumm--ttyyppee PPoolliisshhiinngg MMaacchhiinneess
The drying machine has a stainless steel barrel with meshes. When it is working, the machine throws away the water on the work-pieces after polishing or cleaning by spinning the barrel. During the inner barrel spinning, the heating elements heat the work-pieces in the barrel, and make them dry.
Model Capacity Size (mm) Barrel Size(mm) Power (KW) Weight
L L*W*H Φ*H Motor Heating KG
CTG-400A 40 850*650*700 400*300 0.75 3 125
CTG-500A 70 1000*750*840 500*350 1.1 3 180
CTG-400B 40 700*800*700 400*300 0.75 3 180
CTG-500B 70 850*950*850 500*350 1.1 3 300
Grinding/Polishing compounds
We develop several kinds of grinding compounds according to different grinding or polishing requirements for different materials of work-pieces, such as grinding fluids, polishing fluids, brightening fluids, antirust powder, rust removing fluid, de-wax fluid, grinding & polishing paste, etc.
Features: The grinding/polishing compounds can improve the grinding efficiency and reduce the attrition of the grinding materials; protect & lubricate the work-pieces; and improve the surface finish and brightness of the work-pieces.
Function: The grinding/polishing compounds can de-oil, clean and soft the surface of the work-pieces; antirust; use as grinding additives for coarse or medium grinding; improve the glossiness of the work-pieces surface and protect the brightness of the work-pieces surface.
Model Description Model Description
FX-1 Antirust Powder XGL-6 Brightening Fluid for iron, Al, Mg, Zn, Tin, etc and their alloys.
CXL-2 Copper Oxidation Inhibitor BGL-7 Brightening Fluid for Stainless Steel, Copper, Brass, etc.
BM-10 Rough Grinding Fluid CM-8 Rust Removing Fluid
IInndduussttrriiaall DDrryyiinngg MMaacchhiinneess
CTG-400A/500A CTG-500B CTG-400B
A. Resin Grinding Abrasives
For grinding soft work-pieces, e.g. aluminum. zinc, copper, magnesium, tin, plastic, etc. Or hard work-pieces with tiny burrs
B. Brown Corundum Rough Grinding Abrasives For grinding work-pieces of hard materials, e.g. iron, carbon steel, stainless steel, etc. Or soft work-pieces with large burrs.
C. Ceramic Polishing Abrasives. For polishing and cleaning work-pieces of all materials
Abrasives for Dry Polishing Paste for Dry Polishing
Shape Model Size(mm)a*b Shape Model Size(mm)a*b
PLCO 10*10, 15*15,
20*20 … 45*45
PLTP
10*10, 15*15,
20*20 … 45*45
Shape Model Size(mm)a*b Shape Model Size(mm)a*b
TP 3*3, 4*4, 6*6, 8*8,
10*10 → 40*40
TRP Φ6*12, Φ8*16,
Φ10*20, Φ15*30
RTP 3*3, 4*4, 6*6, 8*8,
10*10 → 40*40
RP Φ1.5*5, Φ3*6, Φ4*8
→ Φ15*30
XTP 3*3, 4*4, 6*6, 8*8,
10*10 → 40*40
S Φ2,Φ3,Φ4,
Φ8,Φ10 → Φ40
Shape Model Size(mm)a*b Shape Model Size(mm)a*b
CTP
3*3, 4*4, 6*6, 8*8,
10*10 → 40*40
CTRP Φ1.5*5, Φ3*6,
Φ4*8 → Φ15*30
CTTP 3*3, 4*4, 6*6, 8*8,
10*10 → 40*40 CRP Φ1.5*5, Φ3*6,
Φ4*8 → Φ15*30
CXTP 3*3, 4*4, 6*6, 8*8,
10*10 → 40*40
CTS Φ2,Φ3,Φ4,
Φ8,Φ10 → Φ40
Shape Size (mm)
Wooden
Granule 4→20
Walnut Shell (4# →36#)
5→0.3
Corncob (4# →36#) 5→0.3
Paste Model Usage
SC Rough grinding for plastic or metal
MP Medium grinding for plastic or metal
SF Fine polishing for plastic or metal
GGrriinnddiinngg && PPoolliisshhiinngg AAbbrraassiivveess
Tonzze International Limited Add: No.23 Ha Yau Tin Tsuen, Yuen Long, NT, H.K.
Tel: 852-6767 7510 Fax: 852-6767 7510
Dongguan City Fenggang Tonzze Machinery Factory Add: No.278 Fengxiang Rd, Fengdeling, Fenggang,
Dongguan, Guangdong, China
TEL: 86-769-8777 2840 FAX: 86-769-8620 4009
http://www.tonzze.cn http://www.dzgr.com
Email: [email protected] [email protected]
Kunshuan Tonzze Grinding Co., Ltd.
Add: No.K16 Stelong Machine & Mould Plaza,
Lujia Town, Kunshan City, Jiangsu, China
Tel: 86-512-5512 0972 Fax: 86-512-5512 0973
Tianjin Tonzze Precision Technology Co., Ltd. Add: Xiaodongzhuang Bridge 7, Dongli District,
Tianjin City, China
(Next to the Light Rail Station)
Tel: 022-2487 0178 Fax: 022-2487 0178
Yanjiang City Tonzze Precision Machinery Co., Ltd.
Add: No. 8, Jinjiaoyi, Shiwan Rd. North, Yangjiang City, Guangdong, China
Tel:86-662-2895 038