physic chap 2 note
TRANSCRIPT
-
7/28/2019 Physic Chap 2 Note
1/47
Linear Motion
Linear motion is the motion in 1 dimension (1-D) or the motion in a straight line.
Distance
1) The distance traveled by an object is the total length that is traveled by thatobject.
2) Distance is a scalar quantity.
3) The SI unit of distance is m (metre).
Displacement
1) Displacement of an object from a point of reference, O is the shortest distanceof the object from point O in a specific direction.
2) Displacement is a vector quantity.
3) The SI unit of displacement is m (metre).
Distance vs Displacement
Distance travelled = 200m
Displacement = 120 m, in the direction of Northeast
Speed
1. Speed is the rate of change in distance. It is a measure of how fast the distance
change in a movement.
2. Speed is a scalar quantity.3. The SI unit of speed is m/s (metre per second)
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/LinearMotion.png -
7/28/2019 Physic Chap 2 Note
2/47
Equation of Speed
Velocity
1. Velocity is define as the rate of displacement change. It is the measure of how
fast the displacement change of a moving object.2. Velocity is a vector quantity.
3. The unit of displacemnet is m/s (metre per second)
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/speedformula.pnghttp://2.bp.blogspot.com/_PyvjcvYfRLk/SWSaG2HkdiI/AAAAAAAAAXU/YPvz41sTVEg/s1600-h/speeed3.jpg -
7/28/2019 Physic Chap 2 Note
3/47
Equation of velocity
Positive or Negative Sign of Velocity
1. In velocity, the positive/negative sign indicates direction.
2. You can take any direction as positive and the opposite as negative.
3. For a linear motion, normally we take the motion to the right as positive andhence the motion to the left as negative.
Acceleration
Acceleration is the rate of velocity change.Acceleration is a vector quantity. It is ameasure of how fast the velocity change.
Acceleration is a vector quantity.
The unit of acceleration is ms-2.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/velocityformula.pnghttp://4.bp.blogspot.com/_PyvjcvYfRLk/SWSan-Qu_PI/AAAAAAAAAXc/PKBX6xN2i00/s1600-h/velocity.jpg -
7/28/2019 Physic Chap 2 Note
4/47
Equation
Additional Notes
An object moves with a constant velocity if the magnitude and direction of the motion is
always constant.An object experiences changes in velocity if
the magnitude of velocity changes
the direction of the motion changes.
An object that experiences changes in velocity is said to have acceleration.
An object traveling with a constant acceleration, a, if the velocity changes at a constantrate.
Equation of Uniform Acceleration
Most of the motion problems can be solved by the following equations. Therefore, make
sure that you memorise all of them.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/linearformula.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/accelerationformula.png -
7/28/2019 Physic Chap 2 Note
5/47
How we know when to use the equation?
There are 3 types of motion:
motion with uniform velocity
motion with uniform acceleration
motion with changing acceleration
The 4 equations are used when the motion is uniform acceleration.
Motion with changing acceleration is not in SPM Physics syllabus. It will be discussed in
Form 5 add maths.
Ticker Timer
A ticker-timer consists of an electrical vibrator which vibrates 50 times per second. This
enables it to make 50 dots per second on a ticker-tape being pulled through it. The timeinterval between two adjacent dots on the ticker-tape is called one tick. One tick is equal
to 1/50 s or 0.02 s.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/linearmotionsummary.png -
7/28/2019 Physic Chap 2 Note
6/47
Uniform Velocity
Thedistance of the dots is equally distributed.
All lengths of tape in the chart are of equal length.
The object is moving at a uniform velocity.
Uniform Acceleration
The
distance between the dots increases uniformly.
The length of the strips of tape in the chart increase uniformly.
The velocity of the object is increasing uniformly, i.e. the object is moving at a
constant acceleration.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0003.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0002.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0001.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0000.jpg -
7/28/2019 Physic Chap 2 Note
7/47
Uniform Deceleration
The
distance between the dots decreases uniformly.
The length of the strips of tape in the chart decreases uniformly.
The velocity of the object is decreasing uniformly, i.e. the object is decelerating
uniformly.
Finding Velocity
Velocity of a motion can be determined by using ticker tape through the following
equation:
Caution!:
t is time taken from the first dot to the last dot of the distance measured.
Example 1
Diagram 2.4 shows a strip of ticker tape that was pulled through a ticker tape timer that
vibrated at 50 times a second. What is the
a. time taken from the first dot to the last dot?
b. average velocity of the object that is represented by the ticker tape?
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0006.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/velocityformula.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0005.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0004.jpg -
7/28/2019 Physic Chap 2 Note
8/47
Answer:
a. There are 15 ticks from the first dot to the last dot, hence
Time taken = 15 0.02s = 0.3sb. Distance travelled = 15cm
Example 1
The ticker-tape in figure above was produced by a toy car moving down a tilted runway.
If the ticker-tape timer produced 50 dots per second, find the acceleration of the toy car.
Answer:
In order to find the acceleration, we need to determine the initial velocity, the final
velocity and the time taken for the velocity change.Initial velocity,
u = \frac{s}{t} = \frac{{3cm}}
{{0.02s}} = 150cms^{ - 1}
Time taken for the velocity change,t = (0.5 + 4 + 0.5) ticks = 5 ticks
t = 5 0.02s = 0.1s
Example 2
A trolley is pushed up a slope. Diagram above shows ticker tape chart that show the
movement of the trolley. Every section of the tape contains 5 ticks. If the ticker-tape
timer produced 50 dots per second, determine the acceleration of the trolley.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0008.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/tickertape_clip_image002_0007.jpg -
7/28/2019 Physic Chap 2 Note
9/47
Answer:
In order to find the acceleration, we need to determine the initial velocity, the final
velocity and the time taken for the velocity change.Initial velocity,
Time taken for the velocity change,
t = (2.5 + 5 + 5 + 5 + 2.5) ticks = 40 ticks
t = 40 0.02s = 0.8s
Displacement - Time Graph
In a Displacement-Time Graph, the gradient of the graph is equal to the velocity ofmotion.
Analysing Displacement - Time Graph
Gradient = 0Hence, velocity = 0
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0000.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002.jpg -
7/28/2019 Physic Chap 2 Note
10/47
Gradient is constant,
hence, velocity is Uniform
Gradient is negative and constant, hence
velocity is uniform and in opposite direction
Gradient is increasing, hence velocity is
increasing.
Gradient is decreasing, hence velocity is
decreasing.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image003_0000.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image003.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image003_0002.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002.jpg -
7/28/2019 Physic Chap 2 Note
11/47
Velocity - Time Graph
The gradient of the velocity-time gradient gives a value of the changing rate invelocity, which is the acceleration of the object.
The area below the velocity-time graph gives a value of the object's displacement.
Analysing Velocity-Time Graph
Uniform velocity
Uniform acceleration
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0004.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0003.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0004.jpg -
7/28/2019 Physic Chap 2 Note
12/47
Increasing acceleration
Uniform deceleration
Decreasing acceleration
Converting a Velocity-Time graph to Acceleration-Time graph
In order to convert a velocity-time graph to acceleration time graph, we need to find the
gradient of the velocity time graph and plot it in the acceleration-time graph.Free fallingis a motion under gravitational force as the only force acting on the moving object. In
SPM, you need to know the graphs of free falling of the following movement
1. Launching object upward.2. Dropping Object from High Place
3. Object Falling and Bounce Back
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0007.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0005.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0006.jpg -
7/28/2019 Physic Chap 2 Note
13/47
Launching Object Upward
Velocity-Time Graph Acceleration-Time Graph
Dropping Object from High Place
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0008.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image003_0007.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image003_0003.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image003_0005.jpg -
7/28/2019 Physic Chap 2 Note
14/47
Velocity-Time Graph Acceleration-Time Graph
Object Falling and Bounce Back
Velocity-Time Graph Acceleration-Time Graph
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image003_0004.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0012.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0011.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0010.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/motiongraph_clip_image002_0009.jpg -
7/28/2019 Physic Chap 2 Note
15/47
Mass
Mass is defined as the amount of matter. The SI unit of mass is kilogram (kg)
Mass is a scalar quantity.
InertiaInertia is the property of a body that tends to maintain its state of motion.
Newton's First Law
In the absence of external forces, an object at rest remains at rest and an object in motion
continues in motion with a constant velocity (that is, with a constant speed in a straightline).
Jerking a Card
When the cardboard is jerked quickly, the coin will fall into the glass.
Explanation:
The inertia of the coin resists the change of its initial state, which is stationary.
As a result, the coin does not move with the cardboard and falls into the glassbecause of gravity.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/pulling-card.png -
7/28/2019 Physic Chap 2 Note
16/47
Pulling a Book
When the book is pulled out, the books on top will fall downwards.
Explanation:
Inertia tries to oppose the change to the stationary situation, that is, when the book
is pulled out, the books on top do not follow suit.
Pulling a Thread
1. Pull slowly - Thread A will snap.
Explanation:
Tension of thread A is higher than string B.
Tension at A = Weight of the load + Pulling Force
2. Yank quickly - Thread B will snap.
Explanation:
The inertia of the load prevents the force from being transmitted to thread A,hence causing thread B to snap.
Larger Mass - Greater Inertia
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/inertia-pulling-string.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/pulling-book.png -
7/28/2019 Physic Chap 2 Note
17/47
Bucket filled with sand is more difficult to be moved. It's also more difficult to be
stopped from swinging.
Explanation:
Object with more mass offers a greater resistance to change from its state of
motion.
Object with larger mass has larger inertia to resist the attempt to change the stateof motion.
Empty cart is easier to be moved
An empty cart is easier to be moved compare with a cart full with load. This is because acart with larger mass has larger inertia to resist the attempt to change the state of motion.
Momentum
Momentum is defined as the product of mass and velocity.Momentum is a vector quantity. It has both magnitude and direction.
The SI unit of momentum is kgms-1
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/pushingcart.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/inertia-pail-with-sand.png -
7/28/2019 Physic Chap 2 Note
18/47
Formula:
Example 1
A student releases a ball with mass of 2 kg from a height of 5 m from the ground. What
would be the momentum of the ball just before it hits the ground?
Answer:
In order to find the momentum, we need to know the mass and the velocity of the ball
right before it hits the ground.
It's given that the mass, m = 2kg.The velocity is not given directly. However, we can determine the velocity, v, by using
the linear equation of uniform acceleration.
This is a free falling motion,
The initial velocity, u = 0The acceleration, a = gravirational acceleration, g = 10ms-2
The dispacement, s = high = 50m.
The final velocity = ?From the equation
v2 = u2 + 2as
v2 = (0)2 + 2(10)(5)
v = 10ms
-1
The momentum,
p = mv =(2)(10) = 20 kgms-1
Principle of Conservation of Momentum
The principle of conservation of momentum states that in a system make out of objects
that react (collide or explode), the total momentum is constant if no external force is
acted upon the system.Sum of Momentum Before Reaction
= Sum of Momentum After Reaction
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/momentumformula.png -
7/28/2019 Physic Chap 2 Note
19/47
Formula
Example 1 - Both Object are in the Same Direction before Collision
A Car A of mass 600 kg moving at 40 ms-1 collides with a car B of mass 800 kg moving
at 20 ms-1 in the same direction. If car B moves forwards at 30 ms-1 by the impact, what is
the velocity, v, of the car A immediately after the crash?
Answer:m1 = 600kg
m2 = 800kgu1 = 40 ms
-1
u2 = 20 ms-1
v1 = ?v2 = 30 ms
-1
According to the principle of conservation of momentum,
m1u1 + m2u2 = m1v1 + m2v2(600)(40) + (800)(20) = (600)v1 + (800)(30)40000 = 600v1 + 24000
600v1 = 16000v1 = 26.67 ms-1
Example 2 - Both Object are in opposite direction Before Collision
A 0.50kg ball traveling at 6.0 ms-1 collides head-on with a 1.0 kg ball moving in theopposite direction at a speed of 12.0 ms-1. The 0.50kg ball moves backward at 14.0 ms-1
after the collision. Find the velocity of the second ball after collision.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/momentumformula2.png -
7/28/2019 Physic Chap 2 Note
20/47
Answer:
m1 = 0.5 kg
m2 = 1.0 kgu1 = 6.0 ms
-1
u2 = -12.0 ms-1
v1 = -14.0 ms-1
v2 = ?
(IMPORTANT: velocity is negative when the object move in opposite direction)
According to the principle of conservation of momentum,m1u1 + m2u2 = m1v1 + m2v2(0.5)(6) + (1.0)(-12) = (0.5)(-14) + (1.0)v2-9 = - 7 + 1v2v2 = -2 ms
-1
Explosion
Before explosion both object stick togetherand at rest.
After collision, both object move at oppositedirection.
Total Momentum before collision Is zero Total Momentum after collision :
m1v1 + m2v2
From the law of conservation of momentum:
Total Momentum Before collision = Total Momentum after collision
0 = m1v1 + m2v2
m1v1 = - m2v2
(-ve sign means opposite direction)
Examples or Application of Conservation of Momentum in Explosion
1. Fire a pistol or rifle2. Launching a rocket
3. Application in jet engine
4. Fan boat
Example 3
A man fires a rifle which has mass of 2.5 kg. If the mass of the bullet is 10 g and it
reaches a velocity of 250 m/s after shooting, what is the recoil velocity of the pistol?
-
7/28/2019 Physic Chap 2 Note
21/47
Answer
This is a typical question of explosion.
m1 = 2.5 kgm2 = 0.01 kg
u1 = 0 ms-1
u2 = 0 ms-1
v1 = ?
v2 = 250 ms-1
By using the equation of conservation of momentum principle0 = m1v1 + m2v20 = (2.5)v1 + (0.01)(250)
(2.5)v1 = -2.5v1 = -1 ms-1
Elastic Collision
Elastic collision is the collision where the kinetic energy is conserved after the collision.
Total Kinetic Energy before Collision= Total Kinetic Energy after Collision
Additional notes:
In an elastic collision, the 2 objects separated right after the collision, and
the momentum is conserved after the collision.
Total energy is conserved after the collision.
Inelastic Collision
Inelastic collision is the collision where the kinetic energy is not conserved after the
collision.Additional notes:
In a perfectly elastic collision, the 2 objects attach together after the collision,
and
the momentum is also conserved after the collision.
Total energy is conserved after the collision.
Example 1 - Perfectly Inelastic Collision
A lorry of mass 8000kg is moving with a velocity of 30 ms-1. The lorry is thenaccidentally collides with a car of mass 1500kg moving in the same direction with a
velocity of 20 ms-1. After the collision, both the vehicles attach together and move with a
speed of velocity v. Find the value of v.
Answer:
(IMPORTANT: When 2 object attach together, they move with same speed.)m1 = 8000kg
m2 = 1500kg
u1 = 30 ms-1
-
7/28/2019 Physic Chap 2 Note
22/47
u2 = 20 ms-1
v1 = v
v2 = vAccording to the principle of conservation of momentum,
m1u1 + m2u2 = m1v1 + m2v2
(8,000)(30) + (1,500)(20) = (8,000)v+ (1,500)v270,000 = 9500v
v = 28.42 ms-1
Rocket
1. 1Mixture of hydrogen and oxygen fuels burn in the combustion chamber.2. Hot gases are expelled through the exhausts at very high speed .
3. The high-speed hot gas produce a high momentum backwards.
4. By conservation of momentum, an equal and opposite momentum is produced and
acted on the rocket, pushing the rocket upwards.
Jet Engine
1. Air is taken in from the front and is compressed by the compressor.
2. Fuel is injected and burnt with the compressed air in the combustion chamber.
3. The hot gas is forced through the engine to turn the turbine blade, which turns thecompressor.
4. High-speed hot gases are ejected from the back with high momentum.
5. This produces an equal and opposite momentum to push the jet plane forward.
Force
1. A force is push or pull exerted on an object.2. Force is a vector quantity that has magnitude and direction.
3. The unit of force is Newton ( or kgms-2).
Unbalanced Force/ Resultant Force
When the forces acting on an object are not balanced, there must be a net force acting on
it. The net force is known as the unbalanced force or the resultant force.
When a force acts on an object, the effect can change the
1. size,
2. shape,3. stationary state,
4. speed and
5. direction of the object.
Newton's Second Law
The rate of change of momentum of a body is directly proportional to the resultant force
acting on the body and is in the same direction.
-
7/28/2019 Physic Chap 2 Note
23/47
Implication:
When there is resultant force acting on an object, the object will accelerate (moving
faster, moving slower or change direction).
Formula of Force
From Newton's Second Law, we can derived the equation
(IMPORTANT: F Must be the net force)
Summary of Newton's 1st Law and 2nd Law
Newton's First Law:
When there is no net force acting on an object, the object is either stationary or move
with constant speed in a straight line.
Newton's Second Law:
When there is a net force acting on an object, the object will accelerate.
Example 1
A box of mass 150kg is placed on a horizontal floor with a smooth surface; find theacceleration of the box when a 300N force is acting on the box horizontally.
Answer:
F = ma
(300) = (150)aa = 2 ms-2
Example 2
A object of mass 50kg is placed on a horizontal floor with a smooth surface. If thevelocity of the object changes from stationary to 25.0 m/s in 5 seconds when is acted by a
force, find the magnitude of the force that is acting?Answer:We know that we can find the magnitude of a force by using the formula F = ma. The
mass m is already given in the question, but the acceleration is not give directly.
We can determine the acceleration from the formula .From the formulaF = ma = (50)(5) = 250N
The force acting on the box is 250N.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/forceformula.png -
7/28/2019 Physic Chap 2 Note
24/47
Impulse
Impulse is defined as the product of the force (F) acting on an object and the time of
action (t). Impulse exerted on an object is equal to the momentum change of the object.Impulse is a vector quantity.
Formula of impulseImpulse is the product of force and time.
Impulse = F t
Impulse = momentum changeImpulse = mv mu
Impulsive Force
Impulsive force is defined as the rate of change of momentum in a reaction.
It is a force which acts on an object for a very short interval during a collision orexplosion.
Effects of impulse vs Force
A force determines the acceleration (rate of velocity change) of an object. A
greater force produces a higher acceleration. An impulse determines the velocity change of an object. A greater impulse yield a
higher velocity change.
Examples Involving Impulsive Force
Playing football
Playing badminton Playing tennis
Playing golf
Playing baseball
Long Jump
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/longjump.jpg -
7/28/2019 Physic Chap 2 Note
25/47
1. The long jump pit is filled with sand to increase the reaction time when atlete land
on it.
2. This is to reduce the impulsive force acts on the leg of the atlete becauseimpulsive force is inversely proportional to the reaction time.
High Jump
(This image is licenced under the GNU Free Document Licence. The original file is from
the Wikipedia.org.)
During a high jump, a high jumper will land on a thick, soft mattress after the
jump.
This is to increase the reaction time and hence reduces the impulsive force acting
on the high jumper.
JumpingA jumper bends his/her leg during landing. This is to increase the reaction time and hencereduce the impact of impulsive force acting on the leg of the jumper.
Crumble Zone
The crumple zone increases the reaction time of collision during an accident.
This causes the impulsive force to be reduced and hence reduces the risk of injuries.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/highjump.jpg -
7/28/2019 Physic Chap 2 Note
26/47
Seat Belt
Prevent the driver and passengers from being flung forward or thrown out of the carduring an emergency break.
Airbag
The inflated airbag during an accident acts as a cushion to lessen the impact when the
driver flings forward hitting the steering wheel or dashboard.
Head Rest
Reduce neck injury when driver and passengers are thrown backwards when the car is
banged from backward.
Windscreen
Shatter-proof glass is used so that it will not break into small pieces when broken. This
may reduce injuries caused by scattered glass.
Padded Dashboard
Cover with soft material. This may increases the reaction time and hence reduce the
impulsive force when passenger knocking on it in accident.
Collapsible Steering Columns
The steering will swing away from drivers chest during collision. This may reduce the
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/airbag.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/seatbelt.png -
7/28/2019 Physic Chap 2 Note
27/47
impulsive force acting on the driver.
Anti-lock Braking System (ABS)
Prevent the wheels from locking when brake applied suddenly by adjusting the pressure
of the brake fluid. This can prevents the car from skidding.
Bumper
Made of elastic material so that it can increases the reaction time and hence reduces the
impulsive force caused by collision.
Passenger Safety Cell
The body of the car is made from strong, rigid stell cage.
This may prevent the car from collapsing on the passengers during a car crash.
Gravitational Field
A gravitational field as a region in which an object experiences a force due togravitational attraction.
Gravitational Field Strength
The gravitational field strength at a point in the gravitational field is the gravitationalforce acting on a mass of 1 kg placed at that point.
The unit of gravitational field strength is N/kg.
The gravitational field strength is denoted by the symbol "g".
Gravitational Field Strength Formula
Gravitational Acceleration
The gravitational acceleration is the acceleration of an object due to the pull of the
gravitational force.
The unit of gravitational acceleration is ms-2
Gravitational acceleratio is also denoted by the symbol "g".
Symbol: g
Important notes:
Gravitational acceleration does not depend on the mass of the moving object.
The magnitude of gravitational acceleration is taken to be 10ms-2.
Gravitational Field Strength vs. Gravitational Acceleration
Both the gravitational field strength and gravitational acceleration have the
symbol, g and the same value (10ms-2) on the surface of the earth.
When considering a body falling freely, the g is the gravitational acceleration.
-
7/28/2019 Physic Chap 2 Note
28/47
When considering objects at rest, g is the Earths gravitational field strength
acting on it.
Weight
The weight of an object is defined as the gravitational force acting on the object.The SI unit of weight is Newton (N)
Differences between Weight and Mass
Weight Mass
Depends on the gravitational fieldstrength
Independent from the gravitational fieldstrength
Vector quantity Scalar Quantity
Unit Newton (N) Unit: Kilogram (kg)
Free Falling
1. Free falling is a motion under force of gravity as the only force acting on themoving object.
2. Practically, free falling can only take place in vacuum.
Gravitational Acceleration
1. The gravitational acceleration is the acceleration of an object due to the pull of thegravitational force. It has the unit of ms-2
2. The symbol of gravitational acceleration is " g ".
3. Gravitational acceleration does not depend on the mass of the moving object.
4. The magnitude of gravitational acceleration is taken to be 10ms-2.
Gravitational Field Strength vs. Gravitational Acceleration
1. Both the gravitational field strength and gravitational acceleration have the
symbol, g and the same value (10ms
-2
) on the surface of the earth.2. When considering a body falling freely, the g is the gravitational acceleration.3. When considering objects at rest, g is the Earths gravitational field strength
acting on it.
Vector and Scalar Quantity
A scalar quantity is a quantity which can be fully described by magnitude only.
-
7/28/2019 Physic Chap 2 Note
29/47
A vector quantity is a quantity which is fully described by both magnitude and direction.
Vector Diagram
The arrow shows the direction of the vector.
The length representing the magnitude of the vector.
Equal Vector
Two vectors A and B may be defined to be equal if they have the same magnitude and
point in the same direction.
Case of Free Falling 1 - Falling from High Place
When an object is released from a high place,
1. its initial velocity, u = 0.
2. its acceleration is equal to the gravitational acceleration, g, which taken to be10ms-2 in SPM.
3. the displacement is the of the object when it reaches the ground is equal to theinitial height of the object, h.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/gravity_clip_image002.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/vectordiagram.png -
7/28/2019 Physic Chap 2 Note
30/47
Case of Free Falling 2 - Launching Object Upward
If an object is launched up vertically,
1. the acceleration = -g (-10ms-2)
2. the velocity become zero when the object reaches the highest point.
3. the displacement of the object at highest point is equal to the vertical height ofobject, h
4. the time taken for the object to move to the maximum height = the time taken for
the object to fall from the maximum point to its initial position.
Vector Addition - Triangle Method
Join the tail of the 2nd vector to the head of the 1st vector. Normally the resultant vector
is marked with double arrow.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/triaglemethod.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/gravity_clip_image002_0000.jpg -
7/28/2019 Physic Chap 2 Note
31/47
Vector Addition - Parallelogram Method
Join the tail of the 2nd vector to the tail of the 1st vector. Normally the resultant vector ismarked with double arrow.
Addition of 2 Perpendicular Vectors
If 2 vectors (a and b) are perpendicular to each others, the magnitude and direction of the
resultant vector can be determined by the following equation.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/vector.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/perpendicularvector.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/parallelogrammethod.png -
7/28/2019 Physic Chap 2 Note
32/47
Example 2
Diagram above shows that four forces of magnitude 2N, 4N, 5N and 8N are acting onpoint O. All the forces are perpendicular to each others. What is the magnitude of the
resulatant force that acts on point O?
Answer:
The resultant force of the horizntal component = 5 - 2 = 3N to the right
The resultant force of the vertical component = 8 - 4 = 4N acting downward.Therefore, the magtitude of these 2 force components,
Vector Resolution
A vector can be resolve into 2 component which is perpendicular to each others.
Example 1
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/vectorresolution.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/example2.png -
7/28/2019 Physic Chap 2 Note
33/47
Diagram above shows a lorry pulling a log with an iron cable. If the tension of the cable
is 3000N and the friction between the log and the ground is 500N, find the horizontal
force that acting on the log.
Answer:Horizontal component of the tension = 3000 cos30o =2598N
Friction = 500N
Resultant horizontal force = 2598N - 500N =2098N
Example 2
Diagram above shows two forces of magnitude 25N are acting on an object of mass 2kg.Find the acceleration of object P, in ms-2.
Answer:
Horizontal component of the forces = 25cos45o + 25cos45o = 35.36N
Vertical component of the forces = 25sin45o - 25sin45o = 0NThe acceleration of the object can be determined by the equation
F = ma
(35.36) = (2)aa = 17.68 ms-2
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/example4.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/example3.png -
7/28/2019 Physic Chap 2 Note
34/47
Inclined Plane
Weight component along the plane = Wsin.
Weight component perpendicular to the plane = Wcos.
Example 3
A block of mass 2 kg is pulling along a plane by a 20N force as shown in diagram above.
Given that the fiction between block and the plane is 2N, find the magnitude of the
resultant force parallel to the plane.Answer:
First of all, let's examine all the forces or component of forces acting along the plane.The force pulling the block, F = 20N
The frictional force Ffric = 2N
The weight component along the plane = 20sin30o = 10NThe resultant force along the plane = 20 - 2 - 10 = 8N
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/example5b.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/example5.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/inclinedplane.png -
7/28/2019 Physic Chap 2 Note
35/47
Vectors in Equilibrium
When 3 vectors are in equilibrium, the resultant vector = 0. After joining all the vectors
tail to head, the head of the last vector will join to the tail of the first vector.
Forces in equilibrium
Forces are in equilibrium means the resultant force in all directions are zero.
When the forces acting on an object are balanced, they cancel each other out. The net
force is zero.
Effect :
an object at rest is continuely at rest [ velocity = 0]
a moving object will move at constant velocity [ a = 0]
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/forceequilibrium.png -
7/28/2019 Physic Chap 2 Note
36/47
Example 1
Diagram above shows a load of mass 500g is hung on a string C, which is tied to 2 otherstrings A and B. Find the tension of string A.
Answer:
Tension of string C, TC = weight of the load = 5N
All forces in the system are in equilibrium, hence
Vertical component of tension A (TA) = TCTAcos60
o = TCTA = TC/cos60
o
TA = 5/cos60o = 10N
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/vectorexample6a.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/vectorexample6.png -
7/28/2019 Physic Chap 2 Note
37/47
Work
1. Work done by a constant force is given by the product of the force and the
distance moved in the direction of the force.2. The unit of Nm(Newton metre) or J(Joule).
3. Work is a scalar quantity.
Equation of Work
When the direction of force and motion are same, = 0o, therefore cos = 1Work done,
W = F s
Example 1
A force of 50 N acts on the block at the angle shown in the diagram. The block moves a
horizontal distance of 3.0 m. Calculate the work being done by the force.
Answer:
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workandenergy_clip_image002_0000.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workformula.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workandenergy_clip_image002.jpg -
7/28/2019 Physic Chap 2 Note
38/47
Work done,
W = F s cos
W = 50 3.0 cos30o = 129.9J
Example 2
Diagram above shows a 10N force is pulling a metal. The friction between the block and
the floor is 5N. If the distance travelled by the metal block is 2m, find
a. the work done by the pulling force
b. the work done by the frictional force
Asnwer:
(a) The force is in the same direction of the motion. Work done by the pulling force,
W = F s = (10)(2) = 20J
(b) The force is not in the same direction of motion, work done by the frictional force
W = F s cos180o= (5)(2)(-1) = -10J
Work Done Against the Force of Gravity
Example 3
Ranjit runs up a staircase of 35 steps. Each steps is 15cm in height. Given that Ranjit's
mass is 45kg, find the work done by Ranjit to reach the top of the staircase.
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workformula2.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workexample2.png -
7/28/2019 Physic Chap 2 Note
39/47
Answer:
In this case, Ranjit does work to overcome the gravity.
Ranjit's mass = 45kgVertical height of the motion, h = 35 0.15
Gravitational field strength, g = 10 ms-2Work done, W = ?
W = mgh = (45)(10)(35 0.15) = 2362.5J
Finding Work from Force-Displacement Graph
In a Force-Displacement graph, work
done is equal to the area in between the graph and the horizontal axis.
Example 4
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workexample4.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workgraph.png -
7/28/2019 Physic Chap 2 Note
40/47
The graph above shows the force acting on a trolley of 5 kg mass over a distance of 10 m.
Find the work done by the force to move the trolley.
Answer:In a Force-Displacement graph, work done is equal to the area below the graph.Therefore, work done
Energy
Energy is defined as the capacity to do work. Work is done when energy
is converted from one form to another.
Nm or Joule(J)
Gravitational Potential Energy
Gravitational potential energy is the energy stored in an object as the
result of its vertical position (i.e., height).
Formula:
Example 1
A ball of 1kg mass is droppped from a height of 4m. What is the maximum
kinetic energy possessed by the ball before it reached the ground?
Answer
According to the principle of conservation of energy, the amount of
potential energy losses is equal to the amount of kinetic energy gain.
Maximum kinetic energy
= Maximum potentila energy losses
= mgh = (1)(10)(4) = 40J
Elastic Potential Energy
Elastic potential energy is the energy stored in elastic materials as
the result of their stretching or compressing.
Formula:
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/eleasticpeformula2.png -
7/28/2019 Physic Chap 2 Note
41/47
Example 2
Diagram above shows a spring with a load of mass 0.5kg. The extention
of the spring is 6cm, find the energy stored in the spring.
Answer:The energy stored in the spring is the elestic potential energy.
Kinetic Energy
Kinetic energy is the energy of motion.
Equation of Kinetic Energy
Example 1
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/kineticenergyformula.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/workexample7.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/gravitationalpeformula.png -
7/28/2019 Physic Chap 2 Note
42/47
Relationship between Energy and Work Done
During a conversing of energy,
Amount of Work Done = Amount of Energy Converted
ExampleA trolley of 5 kg mass moving against friction of 5 N. Its velocity at A is 4ms-1 and itstops at B after 4 seconds. What is the work done to overcome the friction?
Answer:
In this case, kinetic energy is converted into heat energy due to the friction. The workdone to overcome the friction is equal to the amount of kinetic energy converted into heat
energy, hence
Power
Power is the rate at which work is done, which means how fast a work is done.
Formula:
Example 1An electric motor takes 20 s to lift a box of mass 20kg to a height of 1.5 m. Find the
amount of work done by the machine and hence find the power of the electric motor.
Answer:
Work done,
W = mgh = (20)(10)(1.5) = 300J
Efficiency
The efficiency of a device is defined as the percentage of the energy input that is
transformed into useful energy.
Example
In the example above, the input power is 100J/s, the desire output power (useful energy)
is only 75J/s, the remaining power is lost as undisire output. Therefore, the efficiency of
this machine is
75/100 x 100% = 75%
http://spm-physics-402.blogspot.com/2009/01/relationship-between-energy-and-work.htmlhttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/powerformula.pnghttp://spm-physics-402.blogspot.com/2009/01/relationship-between-energy-and-work.html -
7/28/2019 Physic Chap 2 Note
43/47
Air Conditioner
1. Switch off the air conditioner when not in use.
2. Buy the air conditioner with suitable capacity according to the room size.3. Close all the doors and windows of the room to avoid the cool air in the room
from flowing out.
Refrigerator
1. Always remember to close the door of refrigerator.
2. Open the refrigerator only when necessarily.3. Always keep the cooling coil clean.
4. Defrost the refrigerator regularly.
5. Choose the refrigerator with capacity suitable for the family size.6. Refrigerator of large capacity is more efficient compare with refirgerator of small
capacity.
Lamp or Light Bulb
1. Use fluorecent bulb rather than incandescent bulb. Fluorescent bulbs are muchmore efficient than incandescent bulbs.
2. Use a lamp with reflector so that more light is directed towards thr desirable
place.
Washing Machine
1. Use front-loading washing machine rather than top-loading wahing machine
because it uses less water and electricity.2. Use washing machine only when you have sufficient clothes to be washed. Try to
avoid washing small amount of clothes.
Elasticity
Elasticity is the ability of a sub-stance to recover its original shape and size after
distortion.
Forces Between Atoms
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/forcebetweenatom.png -
7/28/2019 Physic Chap 2 Note
44/47
The intermolecular forces consist of an attractive force and a repulsive force.
At the equilibrium distance d, the attractive force equal to the repulsive force.
If the 2 atoms are brought closer, the repulsive force will dominate, produces a netrepulsive force between the atoms.
If the 2 atoms are brought furhter, the attractive force will dominate, produces anet attractive force between the atoms.
Graph of Forces Between 2 atoms
x0 = Equilibrium Distance
When the particles are compressed, x < x0, the attractive force between the particlesincreases.If the distance x exceeds the elastic limit, the attractive force will decreases.
Hooke's Law
Hooke's Law states that if a spring is not stretched beyond its elastic limit, the force that
acts on it is directly proportional to the extension of the spring.
Elastic Limit
The elastic limit of a spring is defined as the maximum force that can be applied to aspring such that the spring will be able to be restored to its original length when the force
is removed.
Equation derived from Hooke's Law
From Hook's Law, we can derived that
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elesticitygraph.png -
7/28/2019 Physic Chap 2 Note
45/47
Spring Constant
Spring constant is defined as the ratio of the force applied on a spring to the extension of
the spring.It is a measure of the stiffness of a spring or elastic object.
Graph of Streching Force - Extension
Gradient = Spring constant
Area below the graph = Work done
F-x graph and spring constant
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticgraph.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/hookeslawformula2.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/hookeslawformula.png -
7/28/2019 Physic Chap 2 Note
46/47
The higher the gradient, the greater the spring constant and the harder (stiffer) spring.
For example, the stiffness of spring A is greater than spring B.
Spring
Arrangement in series: Arrangement in parallel:
Extension = x number of springStiffness decreases
Spring constant = k/number of spring
Extension = x number of springStiffness increases
Spring constant = k number of spring
http://spm-physics-402.blogspot.com/2009/01/spring.htmlhttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/springsystem.pnghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticgraph2.pnghttp://spm-physics-402.blogspot.com/2009/01/spring.html -
7/28/2019 Physic Chap 2 Note
47/47
Factors Affecting the Stiffness of Spring
Stiffer Less stiff
Material type of spring
(A steel spring is stiffer than a copper spring)
Diameter of wire of spring
(The greater the diameter of the wire, the stiffer the spring)
Diameter of the spring
(The smaller the diameter of spring, the stiffer the spring)
Length of the string
(Shorter spring is stiffer)
http://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002_0002.gifhttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002_0001.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002_0002.gifhttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002_0001.gifhttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002_0000.gifhttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002.gifhttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002_0000.jpghttp://www.one-school.net/Malaysia/UniversityandCollege/SPM/revisioncard/physics/forceandmotion/images/elasticity_clip_image002.jpg