pig champ 01
TRANSCRIPT
-
8/2/2019 Pig Champ 01
1/65
Versin traducida de pigchamp01.pdfPgina 1
Cambio de contraseas de cuentas de usuarioUna contrasea de cuenta de usuario puede ser cambiado por el usuario en
cualquier momento.Siga los siguientes pasos para cambiar la cuenta de usuariocontrasea:
1.
Haga clic en Configuracin en la barra de mens
2.
Seleccione Cambiar contrasea. La pantalla de cambio de contrasea aparecer.
3.
Introduzca la contrasea actual en el campo Contrasea actual
4.
Introduzca la contrasea deseada en el campo New Password
5.Vuelva a introducir la contrasea deseada en el campo Verificar contrasea
6.
Haga clic en Aceptar en la esquina inferior izquierda de la pantalla.
La prxima vez que el usuario se registra en el programa, la nueva contrasea
debe ser utilizado.
La conversin de PigCHAMP DOS cuidar 3000*** Es muy importante contar con su PigCHAMP Fecha de DOS Formato de
mes-da! De no hacerlo, dar lugar a datos corruptos. ***
1.
Inicie el programa PigCHAMP DOS y seleccione la finca que se va a convertir2.
Seleccione Informes en el men Base
3.
Seleccione Informes de cra del rebao en el men Informes
4.
Seleccione Historia del rebao de cra men Informes. El informe del historial de
la pantalla de configuracin aparecer.
5.
Configurar la pantalla de informe del historial de aparecer como la siguiente:
Cambiar la contraseaLa conversin de los datos existentes PigCHAMP DOS PigCHAMP
Cuidado de 3000
Pgina 1 de 34
Cambiar la contrasea
10/03/2012
-
8/2/2019 Pig Champ 01
2/65
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 2
6.
Pulse la tecla Insert en el teclado. El informe se guarda automticamente a su
directorio de PigCHAMP DOS. Una vez que el
informe se ha terminado de ejecutarse, la pantalla volver a la piara de cra men
Informes.
7.
Seleccione la historia de nuevo en el rebao de cra men Informes y pulse la
tecla Intro en el teclado
8.
Configurar la pantalla de informe del historial de aparecer como la siguiente:
9.Pulse la tecla Insert en el teclado. El informe se guarda automticamente a su
directorio de PigCHAMP DOS. Una vez que el
informe se ha terminado de ejecutarse, la pantalla volver a la piara de cra men
Informes.
10.
Salga del programa de DOS
La combinacin de jabal y Datos Siembre Historia:
1.
Busque el directorio PigCHAMP. Este es normalmente el PC4 o carpeta PC410
2.Abra el BOAR.TXT
3.
Haga clic en el men Edicin en la barra de men. Aparecer un men.
4.
Haga clic en Seleccionar todo. El documento completo ser resaltada.
5.
Haga clic en el men Edicin en la barra de men de nuevo. El documento debe
seguir siendo resaltado. Seleccione Copiar.
6.
Cierre el archivo BOAR.TXT.7.
Abra el archivo HISTRY.TXT en la carpeta del directorio y haga clic en
PigCHAMP al comienzo de la primera lnea en el archivo, la colocacin de
el cursor al principio.
8.
Haga clic en el cursor. Aparecer un men.
-
8/2/2019 Pig Champ 01
3/65
9.
Seleccione Pegar. Toda la informacin copiada a partir del archivo BOAR.TXT
ahora aparecer al comienzo de la
HISTRY.TXT archivo.
10.
Haga clic en el men Archivo en la barra de men. Aparecer unmen. Seleccione Guardar.
*** Antes de comenzar los pasos a seguir: se recomienda apagar las
actualizaciones automticas y protector de pantalla en el equipo ya que stos
pueden
interrumpir el proceso de conversin. ***
La conversin en PigCHAMP Care 3000
Pgina 2 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 3
1.
Inicie el programa de Atencin PigCHAMP 3000
2.
Seleccione las granjas en la barra de men y haga clic en Crear una nueva
comunidad. La ventana Crear una nueva granja aparecer.
3.Introduzca el cdigo de Granja deseado, nombre de la granja, y tipo de
explotacin. Cualquier otra informacin es opcional.
4.
Haga clic en el botn Aceptar situado en la esquina inferior izquierda de la
ventana Crear una nueva granja
5.
Seleccione la comunidad de reciente creacin de la lista desplegable de las
granjas de registro
6.
Seleccione Archivo en la barra de men. Resalta la importacin en el men.Hagaclic en PigCHAMP lotes de entrada de datos (Sembrar / Jabal de datos)
desde el men.
7.
Vaya al archivo HISTRY.TXT que se cre en DOS y seleccione el botn de
apertura. Todos los datos se mostrarn en el archivo
pantalla.
-
8/2/2019 Pig Champ 01
4/65
8.
Seleccione la pestaa Opciones y validar que todas las opciones de alerta se
comprueban. Esta caracterstica acelera la conversin
procesar por la eliminacin de las advertencias de que el programa automtico
crea elementos tales como razones de diccionario, los lugares y
eventos que se crean cuando los datos no est completa (Ej: la cra falta de unparto el programa de regreso a la fecha
115 das al jabal desconocida a continuacin, convertir la informacin de partos.
9.
Seleccione el botn Inicio.
*** Tenga en cuenta que el proceso de conversin de Atencin 3000 tomar
algn tiempo, un rebao de cerdas 2500, en la produccin durante 10 aos puede
tomar 12 a 15
horas para completar. Le sugerimos que usted no hace nada en el equipo,
mientras que la conversin se est ejecutando. ***
Limpieza y verificaciones de conversin
Una vez que la conversin se ha completado con xito, debe validar los datos y
hacer las correcciones que han sido
marcado en los errores y las advertencias de registro.
1.
Imprimir y / o guardar el registro de errores de la conversin que enumera las
cerdas y los eventos que no fueron convertidas, debidos al evento
lgica.
2.
Corregir la historia de las mujeres sobre la base de la informacin del registro deerror, puede optar por no corregir todos los problemas, tales como
los lechones de una muerte fuera de rango o un hogar de guarda de cero.Por
favor, use su mejor juicio para determinar si es para corregir una mujer
la historia o no.
3.
Verificar que todos los datos de DOS aparece correctamente.
Notas tcnicas:
una.
Un guin bajo (_), sustituir a un espacio en ningn tipo de identificacin. Una
tilde () reemplazar comas y apstrofes.b.
Servicio de identidades de grupo slo se convertir si se ha grabado en la misma
fecha como el evento de apareamiento
c.
Un grado de condicin no va a convertir en la atencin del programa de 3000
DOS
-
8/2/2019 Pig Champ 01
5/65
d.
Todos los lugares a falta de una identidad de la habitacin se convierte en un
signo de interrogacin (?) En lugar de que la falta
ubicacin, por ejemplo una ubicacin de 152, 26 en DOS ahora ser 152, 26?
Crear una nueva comunidad
Si el usuario no es la conversin de los datos existentes a la atencin 3000, unanueva granja de servidores se debe crear una base de datos en blanco.Un
nmero ilimitado de las fincas se pueden crear, sin embargo, el nmero de
mujeres en todas las granjas no pueden exceder el nmero
de las mujeres asignadas a la licencia del programa.
Siga los siguientes pasos para crear una nueva granja de servidores:
1.
Haga clic en el men de las granjas.
2.
Seleccione una granja Crear nuevo. La ventana de creacin de Granja aparecer.
3.
Introduzca el cdigo de Granja deseado. El cdigo debe tener 4 caracteres de
longitud.Tanto el alfa y los cdigos numricos son aceptadas.
4.
Introduzca el nombre de la comunidad que desee. La duracin mxima de un
nombre de granja es de 30 caracteres.Alfabticos, numricos y de los espacios
son aceptadas.
5.
Seleccione el tipo de granja. Las opciones incluyen:
una. Siembre Granja reproductiva: Esta opcin permitir el acceso a la partereproductiva del nico programa.
b. Crecer en Finalizar Granja: Esta opcin permitir el acceso a la parte de
acabado de el nico programa.
c. Ciclo cerrado Granja: Esta opcin permitir el acceso a ambos lados, la
reproduccin y el acabado del programa.
6.
Los campos siguientes son opcionales:
una. Identidad Local: Introduzca el gobierno asigna la identidad de las
instalaciones de la granja. La duracin mxima de un local
la identidad es de 30 caracteres. Alfabticos, numricos, y los espacios sonaceptados.
b. Empresa: En el men desplegable, seleccione la empresa de la finca pertenece
a.
c. Informacin de contacto: Introduzca la informacin de contacto de la granja.
d. Direccin: Escriba la direccin de la granja.
7.
-
8/2/2019 Pig Champ 01
6/65
Haga clic en el botn Aceptar situado en la esquina inferior izquierda de la
ventana de creacin Granja.
8.
Seleccione la comunidad de reciente creacin de la lista desplegable de las
granjas de registro.
9.Instalacin y / o entrada de datos ahora pueden comenzar en el Cuidado de 3000.
Crear una nueva comunidadPgina 3 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 4
Grupos de agricultoresDentro del programa de Cuidado de 3000, grupos de agricultores puede ser
establecida.Grupos de agricultores permitir que los informes que han consolidado
para todos
granjas que residen en el grupo. Cuando un grupo de la granja se selecciona de la
lista de granjas registradas desplegable, un informe adicional,
la
Resumen Comparativo de Produccin
, Estar disponible.
Grupos agrcolas son una gran manera de analizar los datos basados en variablesque son comunes a cada granja, tales como geogrfica
lugar, los gerentes de produccin, etc
Siga los siguientes pasos para crear un Grupo de Granja nueva:
1.
Haga clic en el men de las granjas en la barra de herramientas del men
2.
Seleccione Crear un Grupo de New Farm. La Creacin de una pantalla de Granja
nuevo grupo aparecer.
3.
Escriba un nombre para el grupo de nueva granja en el campo Nombre.Laduracin mxima de un nombre de grupo de la granja es de 30
personajes. Caracteres alfabticos y numricos y los espacios son permitidos.
4.
Si lo desea, seleccione la empresa para incluir en el grupo de granja.Si una
empresa est seleccionada, todas las fincas que pertenecen a ese
empresa sern incluidos en el grupo de granja.
-
8/2/2019 Pig Champ 01
7/65
5.
Si una empresa no es seleccionada, seleccione las fincas que residen en el grupo
mediante la colocacin de una marca en la casilla delante de
la granja
'
s nombre. Las granjas pueden residir en el grupo agrcola ms de uno.6.
Haga clic en Aceptar en la esquina inferior izquierda.
7.
El grupo de la granja ahora aparecer en la lista desplegable de las fincas
registradas.Para consolidar los informes, seleccione el grupo de
la lista. La entrada de datos no estar disponible en la granja de un grupo
seleccionado.
Nota especial: Cuando un grupo de la granja se ha seleccionado como la
explotacin agrcola en actividad de la lista desplegable de explotaciones
registradas, todos los informes
generada se consolidarn en un informe. Por ejemplo, al ver el
Anlisis de rendimiento de Trend
para un grupo de granja
que consta de tres granjas, los nmeros que se ven en el informe ser una
combinacin de la produccin en los tres parques.
Si el usuario selecciona para ejecutar el Resumen comparativo de produccin, el
informe se divide la produccin de cada granja en
el grupo, as como proporcionar una columna consolidada.
Cuentas de usuario y privilegiosCreacin de grupos de agricultoresCreacin de cuentas de usuarioPgina 4 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 5
Cuidado de 3000 permitir la creacin de cuentas de usuario, proporcionando alos usuarios en todos los niveles individualizados de acceso al programa.
Esto es muy beneficioso cuando el programa est en un equipo en la granja o la
versin Enterprise del software se
siendo utilizado en un consultorio mdico.
El administrador del programa es capaz de crear un nuevo usuario, establecer
contraseas, asignar privilegios, editar datos de usuario, y desactivar
-
8/2/2019 Pig Champ 01
8/65
cuentas de usuario.
Para acceder a las opciones de administracin de cuentas de usuario, siga los
siguientes pasos
:
Log-in como administrador del sistema
Haga clic en el men de Usuarios en la barra de herramientasSeleccione Administracin de cuentas de usuario. La cuenta de usuario en
pantalla aparecer la Administracin.
Haga clic en Todos los usuarios en la vista de rbol en el lado izquierdo de la
pantalla de administracin de cuentas de usuario.Todos los usuarios
se resaltan.
Crear una nueva cuenta de usuario:
El administrador puede crear una nueva cuenta de usuario.
Para crear un nuevo usuario, haga lo siguiente:
Introduzca el nombre de usuario deseado en el campo Nombre. El nombre de
usuario debe ser nico para todos los dems usuarios.Debe ser
ms de 4 caracteres y menos de 16 caracteres de longitud. Los dos caracteres
alfabticos y numricos pueden ser
utilizada.
Introduzca la contrasea deseada en el campo Contrasea. La contrasea debe
tener ms de 4 caracteres y menos de
16 caracteres de longitud. Los dos caracteres alfabticos y numricos se pueden
utilizar.
Si la contrasea no se introduce la contrasea por defecto en el nombre de
usuarioSi se usa una autenticacin de Windows para conectarse a un servidor SQL, el
usuario de Windows tiene que estar asociado con el
PigCHAMP Care 3000 Nombre de usuario. Introduzca el nombre de usuario de
Windows en el campo.
Haga clic en Guardar
La nueva cuenta de usuario se crear. Cuando el usuario inicia la Atencin
PigCHAMP 3000 del programa, se debe utilizar
el nombre de usuario y la contrasea que se les asigna.
Definicin de privilegios de usuario:
El administrador puede asignar privilegios de la cuenta de usuario recin creado.Nombres de las granjas se puede asociar a un usuario, la concesin de acceso a
las fincas especificadas Una vez dentro del programa.
Para establecer
privilegios para el acceso a Granja, siga los siguientes pasos:
Haga clic en la ficha Acceso Granja
-
8/2/2019 Pig Champ 01
9/65
Para asignar a un usuario acceder a todas las granjas y los grupos de agricultores,
coloque una marca en la casilla delante de Permitir a los usuarios para acceder a
todas las explotaciones y grupos de agricultores haciendo clic en la casilla de
verificacin.
Para dar al usuario la posibilidad de crear una nueva comunidad, colocar una
marca en la casilla delante de Permitir a los usuarioscreacin de nuevas granjas, haga clic en la casilla de verificacin
Pgina 5 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 6
Si el usuario debe tener la capacidad de crear un grupo de nueva granja deservidores, marque la casilla delante de Permitir a los usuarios crear
nuevos grupos de granja haciendo clic en la casilla de verificacin
Slo los usuarios con acceso a todas las explotaciones y grupos de agricultores
tendrn la posibilidad de crear una nueva granja de servidores
Para limitar el acceso del usuario a las explotaciones agrcolas especficas:
Desmarque la casilla delante de Permitir al usuario acceder a todas las
explotaciones agrcolas y grupos, haga clic en la casilla de verificacin
Seleccione la finca o fincas que el usuario tendr acceso a la casilla de
verificacin haciendo clic en el frente de la finca, la colocacin de un
marca en la casillaPara permitir al usuario editar datos de las explotaciones, haga clic en la casilla
de Permitir al usuario cambiar la identificacin de la granja
detalles, la colocacin de una marca de verificacin en el cuadro
Para permitir al usuario editar la configuracin de fecha, haga clic en la casilla de
Permitir al usuario cambiar la configuracin del campo de fecha,
colocando una marca en la casilla
Para permitir al usuario modificar los objetivos de produccin, haga clic en la
casilla de Permitir al usuario cambiar la produccin agrcola
objetivos, poniendo una marca en la casilla
Para configurar los privilegios de entrada de datos, siga las siguientesinstrucciones:
Haga clic en la ficha de entrada de datos
Para asignar al usuario la posibilidad de hacer la entrada de datos, haga clic en la
casilla de Permitir al usuario ver los datos de entrada, la colocacin de
una marca de verificacin en el cuadro
-
8/2/2019 Pig Champ 01
10/65
Al permitir el acceso a la entrada de datos, otros privilegios de entrada de datos
puede ser asignado:
Coloque una marca en la casilla delante de Permitir la seleccin del elemento de
datos y reordenacin de dar al usuario la
posibilidad de agregar campos predefinidos de entrada de datos y cambiar el
orden en que los campos se muestran en lapantalla de datos de entrada en la Gestin de Datos del artculo
Coloque una marca en la casilla delante de Permitir la administracin de
elementos de datos personalizados para permitir al usuario
crear, modificar y eliminar los campos definidos por el usuario en la Gestin de
Datos del artculo
Coloque una marca en la casilla delante de Permitir la administracin de
elementos de bsqueda que permiten al usuario
modificar o alterar los elementos del diccionario de Gestin de productos de
bsqueda
Para establecer privilegios informe, siga estos pasos:
Haga clic en la pestaa Informes
Para permitir al usuario la posibilidad de crear grupos de informes, haga clic en
la casilla de Permitir la creacin de informes
grupos, colocando una marca en la casilla
Para permitir al usuario la posibilidad de crear plantillas de informes, haga clic en
la casilla de Permitir la creacin de informes
plantillas, colocando una marca en la casilla
Para permitir al usuario la posibilidad de personalizar los parmetros estndar de
informe, haga clic en la casilla de Permitir que elpersonalizacin de los parmetros de informes estndar, colocando una marca en
la casilla
Para permitir el acceso del usuario al SQL-editor, haga clic en la casilla de
Permitir el uso de SQL-editor, la colocacin de un
marca en la casilla
Para establecer privilegios de base de datos, siga estos pasos:
Haga clic en la ficha Base de datos
De forma predeterminada, cada usuario se le permitir hacer copias de seguridad
de la base de datos.Negar que el usuario esta opcin, desactive la casilla de
frente a permitir que este usuario copia de seguridad de esta base de datos.Por defecto, el usuario no se le permitir restablecer la base de datos.Para
conceder el usuario esta opcin, marque la casilla en la parte delantera
de permitir a este usuario a restaurar esta base de datos.
Una vez que todos los privilegios se han creado para el nuevo usuario, haga clic
en el botn Guardar.Para crear usuarios adicionales, repita cada paso
-
8/2/2019 Pig Champ 01
11/65
enumerados anteriormente.Cuando termine de crear cuentas de usuario y cada
cuenta se ha guardado, haga clic en el botn Cerrar en la esquina inferior
esquina izquierda de la pantalla de administracin de cuentas de usuario. Esto
cerrar la ventana.
Edicin de cuentas de usuario:
Una vez que una cuenta de usuario se ha establecido, es posible modificar losprivilegios asignados en cualquier momento.Para editar el usuario
configuracin de la cuenta, siga las siguientes instrucciones:
Haga clic en el men de Usuarios en la barra de herramientas
En el men desplegable, haga clic en Administracin de cuentas de usuario. La
cuenta de usuario en pantalla Administracin
aparecer.
Haga clic en el signo ms (+) delante de todos los usuarios en la vista de rbol en
el lado izquierdo de la cuenta de usuario
Administracin de la pantalla. Todos los usuarios podrn ampliar, listando todas
las cuentas de usuario actuales por debajo de ella.
Haga clic en el nombre de usuario que desea editar. El nombre de usuario
aparecer resaltada.
Realice los cambios apropiados a los privilegios en cada una de las siguientes
fichas:
Identificacin
Granja de acceso
Entrada de datos
Informes
Base de datosUna vez que todos se han hecho cambios, haga clic en el botn Guardar
Haga clic en el botn Cerrar para salir de la cuenta de usuario de pantalla
Administracin
Pgina 6 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 7Eliminar cuentas de usuario:
Una cuenta de usuario activa se pueden eliminar en cualquier momento. Para
eliminar una cuenta de usuario, siga estos pasos:
Haga clic en el men de Usuarios en la barra de herramientas
En el men desplegable, haga clic en Administracin de cuentas de usuario. La
cuenta de usuario en pantalla Administracin
-
8/2/2019 Pig Champ 01
12/65
aparecer.
Haga clic en el signo ms (+) delante de todos los usuarios en la vista de rbol en
el lado izquierdo de la cuenta de usuario
Administracin de la pantalla. Todos los usuarios podrn ampliar, listando todas
las cuentas de usuario actuales por debajo de ella.
Haga clic en el nombre de usuario que desea eliminar. El nombre de usuarioaparecer resaltada.
Haga clic en el botn Eliminar en la esquina superior izquierda de la pantalla de
usuario de Administracin de Cuentas
Una ventana de advertencia de confirmacin. Para continuar con el borrado del
usuario, haga clic en S. Para cancelar esta solicitud,
haga clic en ningn caso.
Al elegir S, el nombre de usuario ser eliminado de la lista de usuarios en el
rbol
Al elegir no, el nombre de usuario permanecer en la lista de usuarios en el rbol
Haga clic en el botn Cerrar para salir de la cuenta de usuario de pantalla
Administracin
Gestin de Datos del artculoUna caracterstica nica para el Cuidado de 3000 es el usuario
'
s capacidad de definir qu campos aparecen en la pantalla, y el orden en que
aparecen para cada evento de entrada de datos.Gestin de datos del artculo
permitir a los usuarios para definir los campos disponibles para cada entrada de
datos
pantalla, seleccione el orden en que los campos se mostrar, y crear camposdefinidos por el usuario de entrada de datos.
Hay tres formas de acceder a la gestin de datos del artculo de la
cualquier
pantalla de datos de entrada:
Haga clic en Agregar elementos de datos personalizados y reposicin de botn
Elementos (
) En la parte superior de cualquier pantalla de entrada de datos.La
Elemento de datos de pantalla de Gestin para el evento de entrada de datos
seleccionado.
Haga clic en la pantalla de entrada de datos. Aparecer un men. Haga clic enAdministracin de elementos de datos.El elemento de datos
Pantalla de Gestin para el evento de entrada de datos seleccionado.
Presione Ctrl + I en el teclado en cualquier pantalla de entrada de datos.El
elemento de datos Gestin de pantalla para los datos seleccionados
evento de entrada aparecer.
Gestin de Datos del artculo
-
8/2/2019 Pig Champ 01
13/65
Pgina 7 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 8
Artculo de gestin de datos de la pantalla:
El elemento de datos contiene una pantalla de Gestin de lista desplegable
Categora de artculos y est dividido en dos columnas
-
Artculos
Disponibles y los elementos seleccionados.
Elemento de lista desplegable Categora:
Esta opcin permite que para cada finca o grupos de las granjas a tener la entradade datos individualizada
los campos que pertenecen a una granja especfica.Para crear una categora de
productos nueva, compruebe que el campo est en blanco, y luego
escriba el nombre deseado nueva categora en el campo.Para aplicar los campos
de entrada de datos a una categora determinada, seleccionar y
colocar las variables de entrada de datos deseados de la finca requiere en los
elementos seleccionados caja.Asegrese de hacer clic en Aceptar cuando
terminado.
Por ejemplo, si la granja A est dando seguimiento a peso de la camada y el
operador (empleado) que asiste durante el parto, peroGranja B no, un tipo de posicin se pueden crear para el Parque una pantalla de
entrada de datos. La basura es necesario
peso y el campo operador se puede aadir a los elementos de columna disponible
despus de la categora artculo ha sido
seleccionado. Esto har que haya menos confusin y ahorrar tiempo a la persona
la entrada de datos al introducir la informacin
para la Granja A frente Granja B.
Elementos disponibles Columna
: Los elementos enumerados en la columna Elementos Disponibles actualmente
no se muestra en la pantalla, peropuede ser.
Los elementos seleccionados de la columna:
Los elementos enumerados en los elementos seleccionados de columna se
muestran actualmente en la pantalla, en el
orden de la lista.
-
8/2/2019 Pig Champ 01
14/65
Algunos artculos se requiere que se visualiza en la pantalla. Estos artculos
tienen un icono de candado de oro junto a ellos. (
)
Otros artculos son opcionales y pueden o no pueden ser visualizados en la
pantalla.
Los usuarios pueden aadir y eliminar los campos opcionales de entrada de datoso alterar el orden en que deben ver todos los campos se muestra para todos los
datos
entrada de evento.
Para agregar predefinidos elementos a la pantalla de entrada de datos:
Haga clic en el elemento deseado en la columna Elementos Disponibles. El tema
ser resaltada.
Haga clic en la flecha que apunta hacia la derecha entre las dos columnas, el tema
ser trasladado a los elementos seleccionados
columna
Una vez que todos los artculos deseados se han trasladado a los elementos
seleccionados en la columna, haga clic en Aplicar, haga clic en Aceptar en la
parte inferior izquierda
esquina de la pantalla de Gestin de Datos del artculo
El elemento de datos de pantalla de gestin se cerrar y todos los elementos
seleccionados aparecern en la pantalla de entrada de datos
Para quitar el pre-definidos los elementos de la pantalla de entrada de datos:
Haga clic en el elemento deseado en los elementos seleccionados de la
columna. El tema ser resaltada.
Haga clic en la flecha que apunta hacia la izquierda entre las dos columnas, elelemento se mover a la columna Elementos Disponibles
Una vez que todos los artculos deseados se han trasladado de los elementos
seleccionados en la columna, haga clic en Aplicar, haga clic en Aceptar en la
parte inferior
esquina izquierda de la pantalla de Gestin de Datos del artculo
El elemento de datos de pantalla de gestin se cerrar y todos los elementos
seleccionados aparecern en la pantalla de entrada de datos
Para volver a colocar los campos de entrada de datos:
Haga clic en el elemento que se va a colocar en los elementos seleccionados de la
columna. El tema ser resaltada.Haga clic en la flecha arriba o abajo a la derecha de los elementos seleccionados
en la columna, dependiendo de la direccin para mover el
elemento. El tema se mueve.
Una vez que todos los artculos deseados se han colocado de nuevo, haga clic en
Aplicar, haga clic en Aceptar en la esquina inferior izquierda esquina de los datos
Elemento de la pantalla Gestin de
-
8/2/2019 Pig Champ 01
15/65
El elemento de datos de pantalla de gestin se cerrar y todos los elementos
seleccionados aparecern en la pantalla de entrada de datos en el
orden definido por el usuario
Creacin de un usuario definido por el campo de introduccin de datos:
Pgina 8 de 34
Cambiar la contrasea10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 9
Cuidado de 3000 permite a los usuarios crear sus propios campos de entrada de
datos para cada evento a travs de la pantalla de gestin de datos del artculo.
Para crear un campo de entrada de datos personalizado, siga estos pasos:
Abra el elemento de datos de pantalla Gestin deHaga clic en Crear usuario de datos definidos por el icono del artculo (
) En la parte superior izquierdo de la pantalla de gestin de datos del artculo.
El elemento de datos Asistente para la administracin aparecer.
Escriba el nombre del campo que se aade a la entrada de datos en el campo
Etiqueta de visualizacin.La duracin mxima de un nombre
terreno es de 30 caracteres alfanumricos.
Escriba la descripcin del campo que se aade en el campo de visualizacin del
sistema. La duracin mxima de una descripcin es
70 caracteres alfanumricos.
Haga clic en Siguiente en la esquina inferior derecha de la pantalla del Asistentede Datos del artculo
Elegir qu tipo de datos se registrarn en el nuevo campo. Las opciones incluyen:
Texto
Lista de las opciones especficas
Fecha
S o no
Nmero
Haga clic en Siguiente en la esquina inferior izquierda de la pantalla del
Asistente de Datos del artculo
Si un campo de texto fue elegido anteriormente, siga estos pasos:Elige el nmero de caracteres se pueden introducir en el nuevo campo de
texto. Introduzca un nmero entre 1 y 100.
Haga clic en Siguiente en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
Haga clic en Finalizar en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
-
8/2/2019 Pig Champ 01
16/65
El nuevo elemento aparece en los elementos seleccionados en la columna
Una vez que el elemento de datos de pantalla de gestin se ha cerrado, el nuevo
campo de texto aparecer en la pantalla de entrada de datos
Si una lista de opciones especficas fue elegida anteriormente, siga estos pasos:
Escriba la primera variable a aadir a la lista en el cuadro de texto
Haga clic en el botn Agregar a la derecha del cuadro de texto o pulse la teclaIntro en el teclado. La variable se
aparecen en el cuadro a continuacin.
Contine agregando variables a la lista hasta que todas las variables deseadas se
han aadido
Para eliminar un elemento de la lista, haga clic en el botn de borrar a la derecha
del cuadro de lista
Una vez que todas las variables deseadas se han aadido a la lista
,
haga clic en Siguiente en la esquina inferior derecha del elemento de datos
Asistente para la pantalla
Haga clic en Finalizar en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
El nuevo elemento aparece ahora en los elementos seleccionados en la columna
Una vez que los datos del artculo pantalla de Gestin se ha cerrado, el campo de
la nueva lista se mostrar en la pantalla de entrada de datos
Si un campo de fecha fue elegida anteriormente, siga estos pasos:
Haga clic en Finalizar en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
El nuevo elemento aparece ahora en los elementos seleccionados en la columnaPgina 9 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 10
Una vez que el elemento de datos de pantalla de gestin se ha cerrado, el campo
de la nueva fecha se mostrar en la entrada de datos
pantallaSi un campo S o No fue elegido anteriormente, siga estos pasos:
Haga clic en Finalizar en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
El nuevo elemento aparece ahora en los elementos seleccionados en la columna
Una vez que el elemento de datos de pantalla de gestin se ha cerrado, el campo
de la nueva fecha se mostrar en la entrada de datos
-
8/2/2019 Pig Champ 01
17/65
pantalla
Si un campo numrico fue elegida anteriormente, siga estos pasos:
Elija cuntos decimales se pueden introducir en el campo de nmero. El lmite es
de ocho decimales.
Haga clic en Siguiente en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculoIntroduzca el valor mnimo que se puede introducir en el campo de nmero. El
valor mnimo debe ser mayor o igual
a cero.
Introduzca el valor mximo que se puede introducir en el campo de nmero. El
valor mximo debe ser menor o
igual a 999.
Haga clic en Finalizar en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
El nuevo elemento aparece ahora en los elementos seleccionados en la columna
Una vez que el elemento de datos de pantalla de gestin se ha cerrado, el campo
nuevo nmero se mostrar en la entrada de datos
campo
Edicin de campos definidos por el usuario de entrada de datos:
Los usuarios pueden modificar un campo definido por el usuario de entrada de
datos en cualquier momento.Para modificar el campo definido por el usuario de
entrada de datos, siga estos pasos:
Haga clic en el elemento que desea editar en la columna Elementos
seleccionados. Se convertir en relieve.
Haga clic en el botn Editar Definido por el usuario Elemento de datos () En la esquina superior izquierda de la Administracin de elementos de datos
pantalla. El elemento de datos aparecer la pantalla del Asistente.
Realice los cambios en la etiqueta y la pantalla de sistema, si es necesario. Haga
clic en Siguiente en la esquina inferior derecha de la
Elemento de datos Asistente para la pantalla.
El tipo de datos almacenados en el campo no puede ser editada.Haga clic en
Siguiente en la esquina inferior derecha del elemento de datos
Asistente para la pantalla.
Editar el nmero de caracteres, aadir o eliminar elementos de la lista, o de
modificar el nmero de decimalesHaga clic en Siguiente en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
Haga clic en Finalizar en la esquina inferior derecha de la pantalla del Asistente
de Datos del artculo
Una vez que el elemento de datos de gestin se cierra la pantalla, los cambios en
el campo aparecer
-
8/2/2019 Pig Champ 01
18/65
Eliminacin de los campos definidos por el usuario de entrada de datos:
Los usuarios pueden eliminar definidos por el usuario campos de entrada de
datos, como siempre que tengan
nunca
han utilizado en la entrada de datos. Si el campo
ha tenido los datos introducidos en ella, aunque sea una vez, no se puede eliminarde la lista. Un campo predefinido no se pueden eliminar.Para eliminar una
definido por el usuario de campo de los elementos seleccionados de la columna y
la lista de elementos de gestin de datos, siga los siguientes pasos:
En la columna de los elementos seleccionados
,
haga clic en el elemento que desea eliminar. El tema ser resaltada.
Haga clic en el botn Eliminar del artculo definido por el usuario de datos (
) En la esquina superior izquierda del elemento de datos
Gestin de la pantalla.
Un mensaje de confirmacin. Para seguir borrando el campo, haga clic en s. Para
cancelar el proceso de eliminacin,
haga clic en ningn caso.
Al elegir S, el mensaje de confirmacin desaparecer y el tema ser removido de
el elemento de datos
Gestin de la pantalla.
Al optar por no, el mensaje de confirmacin desaparecer y el punto se
mantendr en los elementos seleccionados
columna de la pantalla de gestin de datos del artculo.
Definicin de la configuracin del programaDefinicin de la configuracin del programaPgina 10 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 11
El administrador del programa de Cuidado de 3000 tiene la capacidad de
establecer la configuracin que se utilizan en todo el programa decada usuario.
Para configurar las preferencias del programa, siga las siguientes instrucciones:
Log-in como administrador del sistema
Haga clic en Configuracin en la barra de mens
Haga clic en Preferencias de usuario. Las preferencias para el SYSADMIN
aparecer.
-
8/2/2019 Pig Champ 01
19/65
Hay tres categoras diferentes:
Ajustes de entrada de datos
La configuracin del informe
Otros ajustes
Haga clic en el signo ms (+) delante de la categora de alterar. La categora se
expandir y mostrar msopciones.
Ajustes de datos de entrada:
Dentro de la configuracin de entrada de datos categora, los siguientes
parmetros pueden ser alterados:
Ajustes de entrada de datos
Sinnimos
Fosterings
Advertencias
Ajustes de datos de entrada:
El usuario es capaz de establecer la navegacin bsica y la funcionalidad del
programa para la facilidad de entrada de datos.
Navegacin:
El Microsoft Windows estndar para la navegacin entre los campos es el uso de
la tecla Tab del teclado.
Para cambiar esta norma y utilizar la tecla Intro en el teclado para moverse entre
los campos, haga clic en la casilla
delante de utilizar la tecla Enter para pasar al campo de entrada de datos
siguiente, colocando una marca en la casilla. Por defecto, este
opcin no est marcada.Destacado:
Para que el programa seleccione el campo en el que se encuentra el cursor
durante la entrada de datos, haga clic en el
casilla de verificacin frente a Resalte el elemento de entrada de datos enfocado,
colocando una marca en la casilla.Por defecto, esta opcin es
no est marcada
Recuerde que las identidades:
Para recordar la identidad de un animal de un evento a otro, haga clic en la casilla
Recuerde que la identidad de la ltima cuando se pasa de un evento a otro,
colocando una marca en la casilla.De forma predeterminada,esta opcin no est marcada.
Esta funcin slo funcionar si el interruptor del evento es lgico. Por ejemplo, la
identificacin se retendr si
moverse de un parto a un destete. Pasar de un parto de un apareamiento se
restablecer la identificacin.
-
8/2/2019 Pig Champ 01
20/65
La identificacin se restablecer si se conecta a un evento de entrada de datos que
requiere una identidad nica (llegada dorado,
llegada de jabal, etc.)
Historia de Siembra:
Para ver automticamente el historial de la cerda en la pantalla durante la entrada
de datos, haga clic en la casilla deActualizar automticamente Historia Sow, colocando una marca en la casilla. Si
no est marcada, el usuario an podr
para ver la historia en una base, segn sea necesario haciendo clic en el icono de
la historia (
) En todas las pantallas de entrada de datos.De forma predeterminada,
esta opcin no est marcada.
Pgina 11 de 34
Cambiar la contrasea
10/03/2012
file :/ / C: \ Documents and Settings \ SA \ configuration local \ Temp \
hhADDF.htm
Pgina 12
Sinnimos:
Para definir personalizados "calientes" sinnimos clave para navegar entre los
acontecimientos en la entrada de datos, haga clic en la casilla de
Utilizar sinnimos para navegar entre los acontecimientos, colocando una marca
en la casilla. Por defecto, esta opcin est desmarcado.
Los usuarios pueden definir sinnimos personalizados seleccionando el evento dela lista desplegable y escribiendo el sinnimo deseado
en el cuadro de texto sinnimo.
Sinnimos mltiples se pueden introducir para cada evento. Sinnimos separados
por una coma; no use espacios.
Ejemplo: XX, XY, ABC
Sinnimos no puede ser ms de 10 caracteres y no puede contener espacios.
Sinnimos puede ser bloqueado por el administrador. Cuando est bloqueado, el
administrador
'
sinnimos s sirven como sinnimospara todos los usuarios. Slo el administrador es capaz de alterar o modificar la
lista.Para bloquear el acceso a la lista de sinnimos, coloque un
marca en la casilla en la parte inferior izquierdo de la pantalla sinnimo.
Para guardar un golpe de teclado durante la entrada de datos, coloque una marca
en la casilla delante de "Vaya a este cuadro de texto sinnimos
con el ratn slo "en la seccin de navegacin de la pantalla.
-
8/2/2019 Pig Champ 01
21/65
Fosterings:
Los usuarios pueden definir la forma en que desea grabar las identidades sembrar
relacionados con el caso de la promocin.Las opciones incluyen:
Ingrese a la vez fuente y la identidad de cerda destino: El usuario puede registrar
la identidad de cerda de origen (donde los cerdos
viene), una identidad cerda destino (donde los cerdos fueron demasiado) oambos.
Escriba una sola identidad cerda de acogida: el usuario entra en una sola
identidad.Si el evento fue un fuera de crianza, un efecto negativo
nmero (por ejemplo, -2) se introduce en el campo de nmero de lechones.
Advertencia y notificacin de errores:
Si los usuarios no desea que el programa "bip
'
lo que indica un error de entrada de datos o de advertencia, retire el
marca de la casilla delante de Tono en advertencias y errores.
Advertencias Basura Reconciliacin: Cuando la grabacin de eventos que
involucran a los lechones, la validacin puede
ocurrir para determinar si el nmero de cerdos que estn siendo grabadas supera
el nmero esperado de
los lechones de la camada en ese momento. Este valor determina si la
reconciliacin debe comenzar en la
farrowing event or a Nurse On event (if available). Click on the circle in front of
the desired
opcin.
Batch Entries: The user can determine what to do with invalid identities enteredduring batch
eventos. Click on the circle in front of the desired option. Las opciones incluyen:
Save the Event for the valid identities
Do not save the event for any identities
Semen Batches
:
Semen Expiry Dates: If users do not want the program to warn when the Semen
Expiration Date field is left
blank in a
Recoleccin de Semeno
El semen de compra
event, click on the checkbox in front of Warn when there is no
expiry date, removing the checkmark from the box.
If the expiration date is left blank, the semen batch will never expire.
-
8/2/2019 Pig Champ 01
22/65
Semen Doses: If users do not want the program to warn when the Semen Doses
field is left blank in a
Semen Collection or Semen Purchase event, click on the checkbox in front of
Warn when the number of
doses is unlimited, removing the checkmark from the box.
If the number of doses field is left blank, a semen batch can be used an unlimitednumber of times.
Farrowings
:
Liveborn:
If users do not want the program to warn when the total liveborn is zero, click on
the checkbox in front
of Warn when the total liveborn is zero, removing the checkmark from the box.
If users do not want the program to warn when the total liveborn is greater than
the specified
maximum liveborn, click on the checkbox in front of Warn when the total
liveborn is greater than..,
removing the checkmark from the box.
Users can specify the maximum number of liveborn for the warning. The
maximum is 25 piglets.
The default is 25 piglets.
Gestation Length:
If users do not want the program to warn when the gestation length is outside of
the specified range,
click on the checkbox in front of Warn when the gestation length is outside therange, removing thecheckmark from the box.
Users can specify the range of days for the warning. The range must be between
109 and 125
da.
The default is 109 to 125 days.
Pregnancy Checked Negative or Open: Select which action to take if the user
tries to record a farrowing
event for a sow that has a negative or open pregnancy check result recorded
within the sameparity or cycle. Las opciones incluyen:
Do not allow farrowing to be recorded
Warn and allow farrowing to be recorded
Do not warn and allow farrowing to be recorded
Weanings (
Parcial
-
8/2/2019 Pig Champ 01
23/65
,
Completar
, &
Enfermera
Sow):
Number of Piglets:If users do not want the program to warn when the total number of piglets
weaned is zero, click on the
box in front of Warn when the total number of piglets weaned is zero, removing
the checkmark from
la caja.
Pgina 12 de 34
Change Password
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 13
If users want the program to warn when the total number of piglets weaned is
greater than the
specified maximum weaned number, click on the box in front of Warn when total
number of piglets
weaned is greater than.
Users can specify the maximum number of piglets weaned for the warning. El
mximo
number is 25 piglets.The default is 25 piglets.
Reconciliation:
The program can warn the user if the number of piglets weaned does not
reconcile to zero when
entering a complete weaning and/or a nurse sow event. Select the desired
option(s) by placing a
checkmark in the box.
Batch Weanings:
If the user wants only batch weanings of whole numbers, place a checkmark in
the box in front ofPrevent batch weaning entries that do not distribute pigs evenly.
All warnings can be locked by the administrator. When locked, the administrator
'
s warnings serve for all users. Slo el
administrator is able to alter or edit the warnings. To lock down access to the
warnings, place a checkmark in the box in
-
8/2/2019 Pig Champ 01
24/65
the lower left-hand corner of each warning section.
Report Settings:
Within the report settings category, the following settings can be altered:
Report Settings
Period Offsets
List ReportsDefault Groupings
Report Settings
Printed Pages Warning: By default, the program will warn the user when the
report being printed is more than 100 pages
de longitud. This can be edited to reflect the desired warning for page length.
Report Preview Page
: Users have the ability to select the format for previewing a report on screen.
This preference
will determine how the report preview is initially sized. Users can override this
setting once the report preview is
puesto en marcha.
To fit the page to width, click in the circle in front of Fit page to width, filling in
the circle. By default, this is the
selected option.
To show as a whole page, click in the circle in front of Show Whole Page, filling
in the circle.
Report Headers
: Headers are printed on every report. The report header consists of the report
name, farmname and number, date the report was generated and additional information
regarding the actual report.
The report header can be displayed in one of two ways:
Traditional Header: This is the default setting. The header will display in larger
font than the
condensed header. By default, this is the selected option.
Contemporary Header: The header will display in a smaller font than the standard
header. Para seleccionar
the condensed header, select option from dropdown.
Period Offsets:Period offsets can be established for certain reporting calculations. Options
include the Farrowing Rate and
the Pigs per Year calculations.
Farrowing Rate: In order to calculate a Farrowing Rate on certain reports, the
selected reporting period is offset.
-
8/2/2019 Pig Champ 01
25/65
Sows served during the offset period and who subsequently farrow are included
in the farrowing rate calculation.
Users have the option to select the number of days to be included in the Offset
Reporting Period.
Pigs per Year: In order to calculate pigs per sow (or female) per year, the period
used to determine pig days canbe offset x number of days. Specify the desired offset period here. List Reports:
The user can establish specific settings for list type reports. Las opciones
incluyen:
Sorting: When a list report containing multiple columns is sorted, the sorted
value can be organized either left to
right or top to bottom. By default, the value is sorted left to right. To change it to
top to bottom, click on the circle.
Report Headings: By default, report headings will be displayed on each page of
the report. To eliminate the report
header from every page except for the first one, check the box in front of Only
Display the Header on the First Page
of the Report.
Default Groupings:
Many analysis reports allow the user to define groupings for Arrival to First
Service, Cycle and Parity,
Lactation Length, Wean to First Service, and Age at First Service. The user can
establish these groupings through the
Default Grouping section and the groupings will automatically apply to theappropriate report property screens.
Examples of Default Grouping options include:
2..5 would display 2, 3, 4, and 5 individually
5-8 would combine 5, 6, 7, and 8 into one group
-6 or =7 or 7+ would combine anything greater than or equal to 7 in one group
Pgina 13 de 34
Change Password
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 14
Most Report Settings can be locked by the administrator. When locked, the
administrator
'
s report
-
8/2/2019 Pig Champ 01
26/65
settings serve for all users. Only the administrator is able to alter or edit the
report settings. Para bloquear
down access to the report settings, place a checkmark in the lock box in the lower
right hand corner of
each report setting section.
Other Settings: Within the other settings category, the following settings can bealtered:
Otros ajustes
Lengua
Date Formats
E-Mail
Units of Measure and Currency
Other Settings:
Users can define how the program displays female age and farm identification, as
well as the location of a
shared folder.
Female Age: The user can define whether to display either cycle or parity in the
female history
e informes. Cycle refers to the number of reproductive cycles expressed by a
service. Ciclo
is incremented at the first service for a gilt, or the first service after a weaning
event for a sow.
Parity is the number of farrowings a sow has had. Parity is incremented at every
farrowing.
Farm Identification: The user can select the level of identification to be shown inthe report
headers. Options include displaying both the farm code and farm name, or
displaying the farm
name only.
Shared Folder: When importing farm data from an Enterprise client, a network
folder that can
be accessed by both the Enterprise Client and the Enterprise Server must be
specified.
Record that folder
's path in the field provided.
Idioma:
Users can select the preferred language of the program. Users can also switch
back and fourth between
various languages at any time. Select the language to use in the program from the
dropdown menu. Las opciones incluyen
-
8/2/2019 Pig Champ 01
27/65
English, French, Portuguese, Spanish (EU), and Spanish (LA). The program must
be re-started for the change to take
lugar.
Date Format:
Users can define what date display format to use when entering dates or on
printed reports.Input Format: Select the date format to use for date entry from the dropdown
menu.
If the 1000-day format is selected, the user can further define the date format by
selecting to use the fast
modo de entrada. The fast entry mode will retain the two digit year and only the
three digit date will need to be
cambiado.
Display Format: Select the date format to print on reports from the dropdown
menu.
Units of Measure and Currency:
This setting determines how to display measurements on reports. Options include
imperial or
metric. The default is imperial.
E-Mail:
Reports can be e-mailed from directly within the program. In order for this to be
possible, the user
'
s e-mail server
and credentials must be recorded.Most Other Settings can be locked by the administrator. When locked, the
administrator
'
s settings serve for all users.
Only the administrator is able to alter or edit the settings. To lock down access to
the settings, place a checkmark in the
lock box in the lower right hand corner of each setting section.
Delete an Existing FarmThe user is able to delete a farm at any time. Before deleting a farm, make sure
that a proper backup of the farm hasbeen recently created. Deleting a farm from the program will remove it entirely.
The user will not have future access to the
database and the process CANNOT be reversed.
To delete a farm from the program, follow the steps below:
1.
Click on Farms in the menu bar.
-
8/2/2019 Pig Champ 01
28/65
2.
Hacer clic en
Manage Access to Farms and Farm Groups
.
3.
Place a checkmark in the box in front of the farm to be deleted.4.
Click on the farm name to highlight it.
5.
Click on the Delete icon on the right hand side of the screen.
6.
Un mensaje de confirmacin. To continue deleting the farm, click Yes. To cancel
the deletion, click No.
7.
Click Close in the bottom left hand corner to close out of the screen.
You can set up the database to shrink log files after deleting a farm. Ver
Herramientas de mantenimiento
Help File for instructions.
Deleting FarmsPgina 14 de 34
Cambiar la contrasea
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 15Establishing Date SettingsIt is important to select date settings for each farm. By establishing date settings,
the program will automatically create
breeding groups and set default reporting dates. To establish date formats, follow
the steps below:
1.
Click on Farms in the menu bar
2.
Select Date Settings. The date settings screen will appear
3.Select the calendar option to use on the farm. Las opciones incluyen:
una. ISO 8601 Week Numbering
: To use the ISO 8601 week numbering system, click in the checkbox in front of
ISO
8601, placing a checkmark in the box. All other options in the calendar section
will become unavailable.
-
8/2/2019 Pig Champ 01
29/65
i.
By selecting the ISO 8601 week numbering system, the program will assume the
week begins on a
Monday, the year begins in January, and Week 1 will be the first week in January
that includes a
Thursday.1.
Days prior to the first week in a given year will be assigned to the last week of
the previous
aos.
2.
Days after the last week of a given year will be assigned to the first week of the
next year.
ii.
More information regarding the ISO 8601 week numbering system can be found
by performing a
simple search on the internet using any search engine.
b. Standard Date Settings
: To use the standard date settings, select the following:
i.
Reporting Day: Select the last day of the established breeding/reporting week. If
the breed week
runs Sunday through Saturday, select Saturday as the reporting day. By default,
the reporting day is
set for Friday with the week running Saturday through Friday.ii.
Start of Year: Select the first day of the fiscal year for the farm. The start of the
year date should
reflect the first day of the breed week. By default, the start of the year is set for
January 1.
iii.
Refer to the Weeks in Year section to view the exact date in which the farm
'
s first week of the year
begins and the last week of the year ends. You may have to click on the triangleicon next to the
Weeks in Year title to expand the section.
c. 1000 Day Format
: To use the farm
'
s thousand-day calendar, select one of the following options by clicking in
-
8/2/2019 Pig Champ 01
30/65
the circle in front of the option, filling in the circle.
i.
Select Day Zero Date: Allows the user to define the first date of the farm or
system calendar of the
1000-day numbering system. By default, September 27, 1971 is used.
ii.Select Today
'
s Day Number: Allows the user to associate a user defined 1000-day date. De
forma predeterminada,
this will be associated with today'
s PIC 1000-day date.Once all date settings have been established, click on the OK button in the lower
left hand corner of the
pantalla.
NOTE: The date settings can be saved as the default for any new farms, groups,
or companies by
placing a checkmark in the box in front of Use these settings as default for any
new farms, farm groups,
or companies.
Farm IdentificationFarm Identification and contact information can be edited by the user with
assigned user privileges at any time. A
change farm identification information, follow the steps below:1. Click on the Farms Menu
2. Select Farm Identification. The Farm Identification window will appear.
3. Enter the desired Farm Code. The code must be 4 characters in length. Both
alpha and numeric codes are
aceptado.
5. Enter the desired Farm Name. The maximum length for a farm name is 30
characters. Alphabetical, numerical,
and spaces are accepted.
Establishing Date Settings
Farm IdentificationPage 15 of 34
Cambiar la contrasea
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 16
-
8/2/2019 Pig Champ 01
31/65
6. Select the Farm Type. Las opciones incluyen:
una. Sow Reproductive Farm: This option will grant access to the reproductive
side of the program only.
b. Grow Finish Farm: This option will grant access to the finishing side of the
program only.
c. Farrow to Finish Farm: This option will grant access to both the reproductiveand finishing sides of the program.
7. The following fields are optional:
una. Premises Identity: Enter the government assigned premises identity for the
farm. The maximum length for a premises
identity is 30 characters. Alpha, numeric, and spaces are accepted.
b. Company: From the dropdown menu, select the company the farm belongs to.
c. Contact Information: Enter the contact information for the farm.
d. Address: Enter the address for the farm.
e. If desired, click on the Alternate Identities tab and enter any third-party
interface alternate identity information for the
farm. For most users, this section can be left blank.
8. Click on the OK button located in the lower left hand corner of the Farm
Identification window.
Targets and Other SettingsCare 3000 allows the user to define specific settings and targets for each farm
site. Through the Site Settings and
Targets option, users can allocate specifics pertaining to the following:
Reproductive Herd Targets
Reproductive Herd Cull FlagsData Entry Settings
Units of Measurement and Currency
To access Targets and other Settings, follow the instructions for either option
below:
Opcin 1:
To modify settings and targets, select the farm from the Registered Farms
dropdown menu
Click on Farms in the menu bar
Targets and Other Settings
Page 16 of 34Cambiar la contrasea
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 17
-
8/2/2019 Pig Champ 01
32/65
Click on Targets and Other Settings. The Site Settings and Targets window will
appear.
Click on a category to view or edit
To edit a default target value, delete the current value and type in the new value
Click on the OK button in the lower left-hand corner of the Site Settings and
Targets window to save any changesIf changes were not made, click on the Cancel button in the lower left-hand
corner of the Site Settings and Targets
window, closing the window
Opcin 2:
To modify settings and targets, select the farm from the Registered Farms
dropdown menu
Click on the Farm and Farm Group Settings icon in the tool bar
Click on Targets and Other Settings. The Site Settings and Targets window will
appear.
Click on a category to view or edit
To edit a default target value, delete the current value and type in the new value
Click on the OK button in the lower left-hand corner of the Targets window to
save any changes
If no changes were made, click on the Cancel button in the lower left-hand corner
of the Site Settings and Targets
window to close it
Reproductive Herd Targets:
Production targets are used to set goals and report comparisons of actual versus
target projection numbers. ProduccinTargets can be set for the following categories:
Inventario
Servicio
El parto
Piglet Losses
Destete
Eliminacin
By default, each category will have a pre-determined target value based on
PigCHAMP Benchmark averages and legacy
programas. The default target values can be maintained or edited to fit the user'
s operation.
Below is a list of targets that can be viewed or edited and a description of each.
Inventory Production Targets
Sow Herd Size:
The average number of sows in the herd. The default value is 1,300 sows.
-
8/2/2019 Pig Champ 01
33/65
Sow to Boar Ratio:
The ratio of sows to boars. The default value is 0.
Sow to Gilt Ratio:
The ratio of sows to gilts. The default value is 20 sows to one gilt.
Sow to Retained Gilt Ratio:
The ratio of sows to retained gilts. The default value is 0.Service Production Targets
Repeat Rate:
The percent of services that are classified as repeat services or returns to service.
The default is 10%.
Gilt First Services:
The percent of first service females that are classified as gilts (includes gilts
made available). La
default is 20%.
Weaned Sow First Services:
The percent of first services of females that are classified as complete weaned. La
default is 70%. This value cannot be edited by the user.
Weaned Sow Services + Gilt Services + Repeat Rate = 100%
AI Only Services:
The percent of services that are bred by means of only artificial insemination.
The default is 0%.
Natural Only Matings:
The percent of services that are physically mated by boars only. The default is
0%.
Mix of AI and Natural Services:The percent of services that are a combination of both natural boar and artificial
insemination. The default is 100%. This value cannot be edited by the user.
Mix of AI and Natural Matings + AI Only Matings +
Natural Only Matings = 100%
Multiple Mating Services:
The percent of females with more than one mating in the same service period. El
valor predeterminado es
90%.
Solo Boar/Semen Batch Services:
The percent of services in which all matings in the service are performed by thesame
boar or semen batch identity. The default is 0%.
Weaned Sows Bred by 7 Days:
The percent of serviced females that were bred within seven days after a
complete
wean event. The default is 88%,
-
8/2/2019 Pig Champ 01
34/65
Matings per Service:
The average number of matings in each service. The default is 2.3.
Matings per Boar per Week:
The average number of matings per boar per week. The default is 3.5.
Gilt Acclimatization Period:
The average number of days that a female is in the herd before being availablefor service.
The default is 75 days.
Farrowing Production Targets
Liveborn per Litter:
The average number of piglets born alive per litter. The default value is 11 pigs.
Stillborn per Litter:
The average number of piglets stillborn per litter. The default value is .90 pigs.
Mummified per Litter:
The average number of piglets born mummified per litter. The default value is
.30 pigs.
Average Piglet Birth Weight:
The average weight of an individual piglet. The default is 3.4 pounds.
Average Litter Weight:
The average weight of litters with birth weights entered. The default value is 37.4
pounds. Este
value cannot be edited.
Average Litter Weight = Average Liveborn per Litter * Average
Pgina 17 de 34
Cambiar la contrasea10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 18
Piglet Birth Weight
Average Gestation Length:
The average number of days between an effective service and a farrowing. Este
nmero
must be greater than 109 days and less than 126 days. The default value is 115
days.Farrowing Index:
The average number of litters per sow per year. The default value is 2.4 litters.
Services per Week:
The number of sow services per week. The calculation for Services per week is:
[(Sow Herd Size
-
8/2/2019 Pig Champ 01
35/65
* Farrowing Index) / (Farrowing Rate/100)]/52.18. Note: 52.18 = weeks/year.
The default value is 71. This value
cannot be edited.
Farrowing Rate %:
The number of sows farrowed as a percent of sows served in the specified time
period. Ladefault value is 84%.
Farrowings per Week:
The number of sows farrowing per week. (Target Services/Week) * (Farrowing
Rate/100). La
default value is 60. This value cannot be edited.
Piglet Loss Production Targets (expressed as a percentage of the liveborn)
Under 2 Days Old:
The percent of piglets lost at less than two days of age; expressed as a percent of
born alive in the
time period. The default value is 6% of the pigs.
Between 2 and 8 Days Old:
The percent of piglets lost between two and eight days of age; expressed as a
percent of
born alive in the time period. The default value is 3% of the pigs.
Over 8 Days Old:
The percent of piglets lost over eight days of age; expressed as a percent of born
alive in the
specified time period. The default value is 1% of the pigs.
Total Piglet Losses:The total number of piglets lost; expressed as a percent of born alive in the
specified time period.
The default value is 10%. This value cannot be edited.
Total Piglet Losses = Under 2 Days Old + Between 2 and 8 Days Old + Over 8
Days Old
Weaning Production Targets
Lactation Length:
The average number of days between a farrowing and a complete weaning. The
default value is 20
da.Piglets Age at Weaning:
The number of days from the birth of a litter of piglets to the weaning or removal
from the sow
or the number of days from a nurse sow event to a weaning event. The default
value is 18 days.
Average Piglet Wean Weight:
-
8/2/2019 Pig Champ 01
36/65
The average weight of a piglet with wean weights entered. The default value is
12
libras.
Average Litter Weight: The average weights of litters weaned with wean weights
entered. The calculation for Average Litter Weight is:
[(Target avg. born alive per litter) - (Target avg. born alive per litter/Target %total losses)] * (Avg. Wean Wt. Per pig).El valor predeterminado es
118.8 pounds. This value cannot be edited.
Nurse Sows Weaned:
The number of nurse sows weaned; expressed as a percent of the total sows with
a complete
wean in the specified time period. The default value is 0% of the sows.
Sub-standard Weaned:
The number of sub-standard piglets weaned; expressed as a percent of the total
piglets
weaned in the specified time period. The default value is 3% of the piglets.
Weaned per Litter:
The number of piglets weaned per litter. The calculation for Weaned per Litter is:
(Target Piglets
Weaned/Target Sows Weaned). The default is 9.9 piglets. This Value cannot be
edited.
Removal Production Targets
Females Culled or Sold per Year:
The number of females culled per year; expressed as a percent of the average
femaleinventory for the specified time period. The default value is 45% of the females.
Female Deaths per Year:
The number of female deaths per year; expressed as a percent of the average
female
inventory for the specified time period. The default value is 9.5 % of the females.
Female Transferred Off per Year:
The number of females transferred per year; expressed as a percent of the average
female inventory for the specified time period. The default value is 0% of the
females.
Reproductive Herd Cull Flags:Cull Flags are used to set warnings for Sow Cards.
By default, each flag will provide a set target value based on industry standards
and legacy programs. The default target
values can be maintained or edited to fit the user
'
s operation.
-
8/2/2019 Pig Champ 01
37/65
Below is a list of cull flags that can be viewed or edited and a description of each.
Maximum Returns to Service:
The maximum number of returns to service per lifetime. When this number is
reached,
the sow card will be flagged, indicating the sow is a candidate for culling. El
valor predeterminado es 2.Minimum Liveborn per Litter:
The minimum average liveborn per litter. When this number is reached, the sow
card will
be flagged, indicating the sow is a candidate for culling. The default value is 10
piglets.
Minimum Weaned per Litter:
The minimum average piglets weaned per litter. When this number is reached,
the sow
card will be flagged, indicating the sow is a candidate for culling. The default
value is 10 piglets.
Maximum Number of Litters:
The maximum number of litters a sow has farrowed. When this number is
reached, the
sow card will be flagged, indicating the sow is a candidate for culling. The
default value is 8 litters.
Data Entry Settings:
Split Sex:
When entering the number of piglets in certain data entry events, there is the
option to enter the numberas a whole or split by sex.
To enter the number of piglets born alive split by sex, click in the check box in
front of Enter live born piglets
split by sex, placing a checkmark in the box.
To enter the number of piglets weaned split by sex, click in the checkbox in front
of Enter weaned piglets
Pgina 18 de 34
Cambiar la contrasea
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 19
split by sex, placing a checkmark in the box.
By default, neither box will be checked, disabling the split sex option.
Tatuajes:
-
8/2/2019 Pig Champ 01
38/65
When entering tattoos in certain data entry events, there is an option to select
whether or not you will
receive an error if the tattoo being entered already exists on farm.
To have the program check for duplicate tattoos, place a checkmark in the box.
Select the maximum number of characters that can be used in tattoo.
Units of Measure and Currency:This setting determines the unit of measure to use when entering data into the
selected farm.
This setting cannot be changed after any measurement has been entered for the
farm.
Gestin de productos de bsquedaWithin Care 3000, many data entry fields require a user to select from a
dropdown list. Some of these options are pre-
defined by the program, while others are user-defined. Users can add, edit,
delete, and merge list items through the
Lookup Item Management. Lookup Item Management is very similar to the
dictionary function in DOS.
Accessing Lookup Item Management:
There are four ways to access Lookup Item Management from any data entry
screen:
Click on the Manage Lookup Items icon (
) at the top of the data entry screen
Right-click on the data entry screen. A menu will appear. Click on Lookup Item
Management. The Lookup Item
Management screen will appear.Press Ctrl + L on any data entry screen. The Lookup Item Management screen
will appear.
Lookup Item ManagementPgina 19 de 34
Cambiar la contrasea
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 20
Click on Settings in the menu bar and then click on Lookup Item Management.The Lookup Item Management
screen will appear.
Lookup Item Management Screen Layout:
The Lookup Item Management screen is divided into two main sections, the tree
view and the detail panel.
Vista de rbol
-
8/2/2019 Pig Champ 01
39/65
: Located on the left hand side of the screen, the tree view lists the 10 main
Lookup Item Management
categoras.
Those with a plus (+) sign next to the category name either have sub-categories
associated with the main
category, or have items entered for the main category.To view the sub-categories or items that have been entered, click on the plus (+)
sign next to the category
nombre. The category will expand to show the list of sub-categories or items
associated with the main
categora.
If a sub-category is present, click on the plus (+) sign in front of the sub-category
name to view the
items associated with it.
To view individual items, click on the item name in the list. The details for the
item will display in the detail
panel on the right hand side.
Once expanded, click on the minus (-) sign to collapse the category.
Item Detail Panel
: The item detail panel, located on the right hand side of the Lookup Item
Management screen, will
allow the user to add a new item variable to a list, as well as view and edit item
details.
Adding a New Item:
Users can add new items to a Lookup Item Management category at any time. Toadd a new item, follow these steps:
Click on the desired category or sub-category in the tree view. The detail panel to
the right will switch to the
appropriate category and all fields will be blank.
Enter information into the appropriate fields.
Synonym: Enter a unique synonym for the item
A maximum of 5 alpha-numeric characters can be entered
The synonym must be unique to other synonyms already assigned to the items in
the category
During a data entry event, the user can type the synonym into the dropdown listinstead of having to
click and choose
This field is mandatory
Example: B
Name: Enter a unique name for the item
-
8/2/2019 Pig Champ 01
40/65
The maximum number of alpha-numeric characters and spaces that can be
entered will vary between
categories and sub-categories.
The name must be unique to others already assigned to the items in the category
Names will show in reports
This field is mandatoryExample: Behavior
Description: Enter a description or full name for the item
A maximum of 30 alpha-numeric characters and spaces can be entered
This field has the ability to display in reports
This field is optional
Example: Behavior Problem
Depending on the category or sub-category selected, there may be additional
fields.
New variables can be locked by the System Administrator so that users cannot
edit them.
When all information has been entered, click on Save, located near the bottom
left hand corner of the Detail
pantalla.
Category and Sub-Category names in the tree view cannot be added.
Editing an Existing Item:
An existing item can be edited at any time; however, after it has been used, some
of the specific details cannot be
cambiado. To edit an existing item, follow these steps:
Click on the plus (+) sign in front of the category or sub-category of the variableto be edited in the tree view
Click on the variable to be edited
The entry screen to the right will auto-populate with the chosen item
'
s details
Edit the appropriate information
When all information has been entered, click on Save, located near the bottom
left hand corner of the Detail screen
Category and Sub-Category names in the tree view cannot be edited
Deleting an Existing Item:An item can be deleted from Lookup Item Management if:
Tiene
no
been used in the database
Era
no
-
8/2/2019 Pig Champ 01
41/65
pre-defined by the program
If the item has been used, or was pre-defined, use the Disable or Merge features.
To delete an existing item from Lookup Item Management, follow the
instructions below:
Page 20 of 34
Cambiar la contrasea10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 21
Click on the plus (+) sign in front of the category or sub-category of the variable
to be deleted in the tree view
Click on the variable to be deleted
Click Delete (
) in the upper left hand corner of the Lookup Item Management screen. This willremove the item
from the list.
Category and Sub-Category names in the tree view cannot be deleted
The user can also select the category or sub-category name and click Delete (
) in the upper left hand corner of the
Lookup Item Management screen to remove all unused, user-defined items from
the list.
Disabling Existing Items:
The Disable function is used to hide an item within a category orsub-category.
Disabling the item will remove it fromany dropdown menus in Care 3000, but keep it in the database for future use or
reference. Pre-defined and user-defined
items can be disabled. This feature is most often used to simplify data entry. To
disable an item, do the following:
Click on the plus (+) sign in front of the category or sub-category of the variable
to be disabled in the tree view
Click on the variable to be disabled
Check the box in front of Disable this Item in the lower left hand corner of the
Detail screen. This will remove the
item from the dropdown menus in data entry, but retain it in the database andLookup Item List.
Category and Sub-Category names in the tree view cannot be disabled
Barn, Room, and Pen locations cannot be disabled
Merge Lookup Item Management Items:
The Merge function is used to combine two variables within a Lookup Item
Management category. The user is able to
-
8/2/2019 Pig Champ 01
42/65
select items to be replaced by other existing items in the tree view. This feature is
most often used to cleanup database
reasons for multiple farms and ease data entry. To merge items, follow the steps
below:
Select the item to be merged into another item in the tree view
NOTE: Only items can be merged, not categories or sub-categoriesClick on the Merge Items tab in the details panel
Click on the Replace With dropdown menu
Select the item to merge with
Click on Replace
Click on Yes
Click on OK
This process cannot be reversed. Once the user confirms by clicking on YES" toReplace, the merge will happen.
Lookup Item Management Categories:
The Lookup Item Management is broken down into 10 main categories. Some of
the main categories have sub-
categories associated with them. The categories, sub-categories, and a brief
description of each are below.
Genetics and Genetic Companies Category:
The Genetics and Genetic Companies category contains the following sub-
categories:
Genetic Companies:
The items in this list refer to companies that supply genetics for the operation.
Genetics:The items in this list refer to the genetic makeup of the animals arrived into the
herd and the details
associated with that particular genetic line.
Operators Category:
The names in this list represent production staff on the farm. This list will be
used to identify who was
responsible for specific production events. If PigCHAMP Mobiles are being used
on the farm, the user name and
password for the mobile application is defined here.
Flags, Conditions, Defects, Medications, and Vaccines Category:This category contains the following sub-categories:
Banderas:
The items in this list represent reasons for female flag or boar flag events.
Disposal & Treatment Conditions:
The items in this list are used to record why a female, boar, or piglet was sold,
died or
-
8/2/2019 Pig Champ 01
43/65
tratada.
Medications/Vaccinations:
The items in this list define what medications and vaccinations are used to treat
animals in
the herd, as well as administration parameters. It also allows for recording market
withdrawl periods.Defects:
The items in this list represent types of piglet defects. These items are associated
with the Piglet Defect
evento.
Pig Condition Scores Category:
This category contains the following sub-categories:
Condition Score:
The items in this list are used to define the type of scoring system used for female
or boar body
condicin.
Lesion Score:
The items in this list represent the severity of lesions on an animal. This allows
you to define your own
scoring system.
Locations Category:
This category contains the following sub-categories:
Feed Stations:
The items in this list represent specific feeding stations located on the farm.
Ubicaciones:The items in this list represent specific pig locations within the farm. The user
can record Barn, Room, or
Pen locations.
Page 21 of 34
Cambiar la contrasea
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 22
Packers/Buyers and Other Farms Category:This category contains the following sub-categories:
Packers/Buyers:
This list represents the final destination of an animal that has been sold from the
system. Esta lista
will be available in the female sale and boar sale events.
Other Farms (External):
-
8/2/2019 Pig Champ 01
44/65
This list represents external locations in which animals originate or are
transferred to.
Suppliers and Manufacturers Category:
This category contains the following sub-categories:
Transporte:
Items in this list are used to identify the names of drivers or trucking companiesthat haul animals from
the farm to another destination.
AI Studs:
The variables in this list represent those who supply the farm with semen
batches. Esta lista ser
available in the Source dropdown list in the Semen Purchase event.
Suppliers:
An item in this list represents a specific supplier that provides goods to the farm.
Mating Scores Category:
This category contains the following sub-categories:
Mating Lock:
Items in this list represent specific scores assigned to the mating lock.
Mating Leakage:
Items in this list represent specific scores assigned to the amount of leakage
present at the time of
the mating event.
Mating Quality:
Items in this list represent specific scores assigned to the quality of the mating.
Mating Standing Reflex Score:Items in this list represent specific scores assigned to the standing reflex at the
time of
the mating.
Herd Categories:
The items in this list will allow the user to place animals into user-defined groups
within the breeding herd,
granting the ability to track the group.
Pregnancy Check Test Types Category:
The items in this list represent the methods used to identify pregnancy results
withinla operacin.
Main Window LayoutPigCHAMP Care Reproduction
'
s main window is comprised of nine regions:
1.
-
8/2/2019 Pig Champ 01
45/65
Barra de ttulo
2.
Barra de mens
3.
Settings tool bar
4.Registered Farms dropdown list
5.
Reports tool bar
6.
Vista de rbol
7.
Informe de la cola
8.
Tip of the Day screen
Main Window LayoutPage 22 of 34
Change Password
10/03/2012
file://C:\Documents and Settings\HS\Configuracin local\Temp\hhADDF.htm
Pgina 23
9.
Data Entry/Reports Panel
Please see the description and specific information about each region.1. Barra de ttulo
: The title bar is located at the very top of the program. It indicates what program
the user is in and
contains the standard window controls. Users can move a window by clicking on
the title bar, holding down the
mouse and dragging it to a desired location. The window size can also be
switched between its maximized and
restored screen size by double clicking on the title bar. If a w