pipe clamp - cobalch aps › wp-content › uploads › 2020 › 03 › 3521gb.pdf · pipe clamp...

Cobalch ApS ● Hejreskovvej 24 ● DK-3490 Kvistgård ● Denmark ● Tel.: +45 4582 0533 Danske Bank: 1471 4130088031 ● IBAN - DKK: DK3130004130088031 - EUR: DK4730004130088228 ● Swi� code: DABADKKK CVR nr. DK70614316 ● [email protected] ● www.cobalch.com

3.5.2.1

PIPE CLAMP

mailto:[email protected]


3.5.2.2

Pipe clamp Type RA

DN 15 - DN 1200

Pipe clamp type RA - DN 15 - DN 1200 Material S235JR DIN EN 10025-2, for temperature up to 300°C

Surface After DIN 3567 Form A (DN20-500), other sizes based on DIN 3567, ex. bolts Bolts and nuts after DIN ISO 4017/4032 - 8,8/8 hot-dip galvanised (DIN EN ISO 898)

Ø Pipe BxS A C F R D Bolt

Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg 21,3 25,0 26,9 30,0 33,7 38,0 42,4 44,5 48,3 57,0 60,3 76,1 88,9

108,0 114,3 133,0 139,7 159,0 168,3 193,7 219,1 267,0 273,0 323,9 355,6 368,0 406,4 419,0 457,0 508,0 521,0 610,0 610,0 711,0 711,0 813,0 813,0 914,0

1016,0 1220,0

30x5 30x5 30x5 30x5 30x5 30x5 30x5 30x5 30x5 40x6 40x6 40x6 40x6 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 60x8 60x8 60x8 60x8 60x8

70x10 70x10 70x10 70x10 70x10 70x10 90x15 70x10 90x15 70x15 90x15 90x15 90x15 90x15

56 62 66 68 72 76 82 84 88

104 108 122 136 172 178 196 204 222 232 258 284 342 348 398 432 444 498 510 550 600 614 717 740 812 850 913 950

1050 1140 1360

15 15 15 15 15 15 15 15 15 18 18 18 18 24 24 24 24 24 24 24 24 30 30 30 30 30 36 36 36 36 36 36 45 36 45 36 45 45 45 45

7 7 7 7 7 7 7 7 7 9 9 9 9 11 11 11 11 11 11 11 11 14 14 14 14 14 18 18 18 18 18 18 25 18 25 18 25 25 25 25

10 10 10 10 10 10 10 10 10 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 30 20 30 20 30 30 30 30

11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 14,0 14,0 14,0 14,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 27,0 27,0 27,0 27,0 27,0 27,0 33,0 27,0 33,0 27,0 33,0 33,0 33,0 33,0

10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 12x50 12x50 12x50 12x50 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 20x70 20x70 20x70 20x70 20x70 24x90 24x90 24x90 24x90 24x90 24x90

30x120 24x90

30x120 24x90

30x120 30x120 30x120 30x120

7,2 6,7 6,3 5,9 5,2 4,9 4,4 4,4 4,1 6,7 6,4 5,7 5,0

10,0 9,5 8,8 8,3 7,7 7,2 6,4 5,7 5,5 5,4 4,7 4,4 4,4 7,1 7,0 6,5 6,0 6,0 5,9

14,6 5,3

12,7 4,2

11,9 9,4 8,7 7,7

RA-022-R RA-025-R RA-027-R RA-030-R RA-034-R RA-038-R RA-043-R RA-045-R RA-049-R RA-057-R RA-061-R RA-077-R RA-089-R RA-108-R RA-115-R RA-133-R RA-140-R RA-159-R RA-169-R RA-194-R RA-220-R RA-267-R RA-273-R RA-324-R RA-356-R RA-368-R RA-407-R RA-419-R RA-457-R RA-508-R RA-521-R RA-609-R RA-610-R RA-711-R RA-712-R RA-812-R RA-813-R RA-914-R

RA-1016-R RA-1220-R

0,20 0,22 0,23 0,24 0,25 0,26 0,28 0,29 0,30 0,56 0,58 0,69 0,75 1,59 1,63 1,79 1,83 2,00 2,08 2,42 2,64 3,85 3,91 4,49 5,09 5,30 8,52 8,75 9,17 10,2 10,5 11,9 24,0 13,7 27,5 15,4 31,0 34,0 37,3 49,3



3.5.2.3

Pipe clamp Type RA

DN 15 - DN 1200

Pipe clamp type RA - DN 15 - DN 1200 Material 16mo3 EN 10028-2, for temperature up to 450°C

Surface After DIN 3567 Form A (DN 20-500), other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 high temperature GA/G (DIN EN ISO 10269)


Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg 21,3 25,0 26,9 30,0 33,7 38,0 42,4 44,5 48,3 57,0 60,3 76,1 88,9

108,0 114,3 133,0 139,7 159,0 168,3 193,7 219,1 267,0 273,0 323,9 355,6 368,0 406,4 419,0 457,0 508,0 521,0 610,0 610,0 711,0 711,0 813,0 813,0 914,0

1016,0 1220,0


70x10 70x10 70x10 70x10 70x10 70x10 90x15 70x10 90x15 70x15 90x15 90x15 90x15 90x15

56 62 66 68 72 76 82 84 88

104 108 122 136 172 178 196 204 222 232 258 284 342 348 398 432 444 498 510 550 600 614 717 740 812 850 913 950

1050 1140 1360

15 15 15 15 15 15 15 15 15 18 18 18 18 24 24 24 24 24 24 24 24 30 30 30 30 30 36 36 36 36 36 36 45 36 45 36 45 45 45 45

7 7 7 7 7 7 7 7 7 9 9 9 9 11 11 11 11 11 11 11 11 14 14 14 14 14 18 18 18 18 18 18 25 18 25 18 25 25 25 25

10 10 10 10 10 10 10 10 10 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 30 20 30 20 30 30 30 30

11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 14,0 14,0 14,0 14,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 27,0 27,0 27,0 27,0 27,0 27,0 33,0 27,0 33,0 27,0 33,0 33,0 33,0 33,0


30x120 24x90

30x120 24x90

30x120 30x120 30x120 30x120

6,3 5,7 5,2 4,8 4,5 4,1 3,8 3,8 3,4 5,7 5,4 4,8 4,3 8,6 8,3 7,4 7,0 6,5 6,1 5,4 4,8 4,7 4,5 4,1 3,8 3,6 6,1 5,9 5,6 5,2 5,0 5,0

12,4 4,5

10,8 3,5 9,9 9,5 9,5 7,9

RA-022-M RA-025-M RA-027-M RA-030-M RA-034-M RA-038-M RA-043-M RA-045-M RA-049-M RA-057-M RA-061-M RA-077-M RA-089-M RA-108-M RA-115-M RA-133-M RA-140-M RA-159-M RA-169-M RA-194-M RA-220-M RA-267-M RA-273-M RA-324-M RA-356-M RA-368-M RA-407-M RA-419-M RA-457-M RA-508-M RA-521-M RA-609-M RA-610-M RA-711-M RA-712-M RA-812-M RA-813-M RA-914-M

RA-1016-M RA-1220-M

0,20 0,22 0,23 0,24 0,25 0,26 0,28 0,29 0,30 0,56 0,58 0,69 0,75 1,59 1,63 1,79 1,83 2,00 2,08 2,42 2,64 3,85 3,91 4,49 5,09 5,30 8,52 8,75 9,17 10,2 10,5 11,9 24,0 13,7 27,5 15,4 31,0 34,0 37,3 49,3

Type with bolt and nuts

Weightkg

RA-022-M-GAL RA-025-M-GAL RA-027-M-GAL RA-030-M-GAL RA-034-M-GAL RA-038-M-GAL RA-043-M-GAL RA-045-M-GAL RA-049-M-GAL RA-057-M-GAL RA-061-M-GAL RA-077-M-GAL RA-089-M-GAL RA-108-M-GAL RA-115-M-GAL RA-133-M-GAL RA-140-M-GAL RA-159-M-GAL RA-169-M-GAL RA-194-M-GAL RA-220-M-GAL RA-267-M-GAL RA-273-M-GAL RA-324-M-GAL RA-356-M-GAL RA-368-M-GAL RA-407-M-GAL RA-419-M-GAL RA-457-M-GAL RA-508-M-GAL RA-521-M-GAL RA-609-M-GAL RA-610-M-GAL RA-711-M-GAL RA-712-M-GAL RA-812-M-GAL RA-813-M-GAL RA-914-M-GAL

RA-1016-M-GAL RA-1220-M-GAL

0,29 0,31 0,32 0,33 0,34 0,35 0,37 0,38 0,39 0,70 0,72 0,83 0,89 1,90 1,94 2,10 2,14 2,31 2,39 2,73 2,95 4,41 4,47 5,05 5,65 5,86 9,53 9,76 10,2 11,2 11,5 12,9 26,1 14,7 29,6 16,4 33,1 36,1 39,4 51,4



3.5.2.4

Pipe clamp Type RA

DN 15 - DN 1200

Pipe clamp type RA - DN 15 - DN 1200 Material 13CrMo4-5 EN 10028-2, for temperature up to 450°C

Surface After DIN 3567 Form A (DN 20-500), other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 high temperature GA/KG (DIN EN ISO 267-13)


Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg 21,3 25,0 26,9 30,0 33,7 38,0 42,4 44,5 48,3 57,0 60,3 76,1 88,9

108,0 114,3 133,0 139,7 159,0 168,3 193,7 219,1 267,0 273,0 323,9 355,6 368,0 406,4 419,0 457,0 508,0 521,0 610,0 610,0 711,0 711,0 813,0 813,0 914,0

1016,0 1220,0


70x10 70x10 70x10 70x10 70x10 70x10 90x15 70x10 90x15 70x15 90x15 90x15 90x15 90x15

56 62 66 68 72 76 82 84 88

104 108 122 136 172 178 196 204 222 232 258 284 342 348 398 432 444 498 510 550 600 614 717 740 812 850 913 950

1050 1140 1360

15 15 15 15 15 15 15 15 15 18 18 18 18 24 24 24 24 24 24 24 24 30 30 30 30 30 36 36 36 36 36 36 45 36 45 36 45 45 45 45

7 7 7 7 7 7 7 7 7 9 9 9 9 11 11 11 11 11 11 11 11 14 14 14 14 14 18 18 18 18 18 18 25 18 25 18 25 25 25 25

10 10 10 10 10 10 10 10 10 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 30 20 30 20 30 30 30 30

11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 14,0 14,0 14,0 14,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 27,0 27,0 27,0 27,0 27,0 27,0 33,0 27,0 33,0 27,0 33,0 33,0 33,0 33,0


30x120 24x90

30x120 24x90

30x120 30x120 30x120 30x120

3,5 3,2 2,9 2,7 2,5 2,3 2,1 2,1 1,9 3,2 3,0 2,7 2,4 4,8 4,6 4,1 3,9 3,6 3,4 3,0 2,7 2,6 2,5 2,3 2,1 2,0 3,4 3,3 3,1 2,9 2,8 2,8 6,9 2,5 6,0 2,0 5,5 4,7 4,8 3,9

RA-022-C RA-025-C RA-027-C RA-030-C RA-034-C RA-038-C RA-043-C RA-045-C RA-049-C RA-057-C RA-061-C RA-077-C RA-089-C RA-108-C RA-115-C RA-133-C RA-140-C RA-159-C RA-169-C RA-194-C RA-220-C RA-267-C RA-273-C RA-324-C RA-356-C RA-368-C RA-407-C RA-419-C RA-457-C RA-508-C RA-521-C RA-609-C RA-610-C RA-711-C RA-712-C RA-812-C RA-813-C RA-914-C

RA-1016-C RA-1220-C

0,20 0,22 0,23 0,24 0,25 0,26 0,28 0,29 0,30 0,56 0,58 0,69 0,75 1,59 1,63 1,79 1,83 2,00 2,08 2,42 2,64 3,85 3,91 4,49 5,09 5,30 8,52 8,75 9,17 10,2 10,5 11,9 24,0 13,7 27,5 15,4 31,0 34,0 37,3 49,3

Type with bolt

Weight kg

RA-022-C-GAL RA-025-C-GAL RA-027-C-GAL RA-030-C-GAL RA-034-C-GAL RA-038-C-GAL RA-043-C-GAL RA-045-C-GAL RA-049-C-GAL RA-057-C-GAL RA-061-C-GAL RA-077-C-GAL RA-089-C-GAL RA-108-C-GAL RA-115-C-GAL RA-133-C-GAL RA-140-C-GAL RA-159-C-GAL RA-169-C-GAL RA-194-C-GAL RA-220-C-GAL RA-267-C-GAL RA-273-C-GAL RA-324-C-GAL RA-356-C-GAL RA-368-C-GAL RA-407-C-GAL RA-419-C-GAL RA-457-C-GAL RA-508-C-GAL RA-521-C-GAL RA-609-C-GAL RA-610-C-GAL RA-711-C-GAL RA-712-C-GAL RA-812-C-GAL RA-813-C-GAL RA-914-C-GAL RA-1016-C-GAL RA-1220-C-GAL

0,29 0,31 0,32 0,33 0,34 0,35 0,37 0,38 0,39 0,70 0,72 0,83 0,89 1,90 1,94 2,10 2,14 2,31 2,39 2,73 2,95 4,41 4,47 5,05 5,65 5,86 9,53 9,76 10,2 11,2 11,5 12,9 26,1 14,7 29,6 16,4 33,1 36,1 39,4 51,4



Pipe clamp Type RA

DN 15 - DN 350

Pipe clamp type RA - DN 15 - DN 350 Material 1.4541 EN 10088-3, for temperature op to 400°C

Surface After DIN 3567 Form A, other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 A4 (ISO 3506-2)


Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg

21,3 25,0 26,9 30,0 33,7 38,0 42,4 44,5 48,3 54,0 57,0 60,3 70,0 76,1 84,0 88,9

101,6 108,0 114,3 129,0 133,0 139,7 154,0 159,0 168,3 193,7 205,0 219,1 255,0 267,0 273,0 306,0 323,9 355,6 368,0

30x5 30x5 30x5 30x5 30x5 30x5 30x5 30x5 30x5 40X6 40x6 40x6 40x6 40x6 40x6 40x6 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 60x8 60x8 60x8 60x8 60x8 60x8 60x8

56 62 66 68 72 76 82 84 88 98

104 108 119 122 130 136 165 172 178 190 196 204 217 222 232 258 275 284 325 342 348 381 398 432 444

15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30

7 7 7 7 7 7 7 7 7 9 9 9 9 9 9 9 11 11 11 11 11 11 11 11 11 11 11 11 14 14 14 14 14 14 14

10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 14,0 14,0 14,0 14,0 14,0 14,0 14,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 23,0 23,0

10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 12x50 12x50 12x50 12x50 12x50 12x50 12x50 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 20x70 20x70 20x70 20x70 20x70 20x70 20x70

7,2 6,7 6,3 5,9 5,2 4,9 4,4 4,4 4,1 7,6 6,7 6,4 5,9 5,7 5,3 5,0

10,6 10,0 9,5 9,1 8,8 8,3 8,1 7,7 7,2 6,4 6,2 5,7 5,8 5,5 5,4 5,0 4,7 4,4 4,4

RA-022-B RA-025-B RA-027-B RA-030-B RA-034-B RA-038-B RA-043-B RA-045-B RA-049-B RA-054-B RA-057-B RA-061-B RA-070-B RA-077-B RA-084-B RA-089-B RA-102-B RA-108-B RA-115-B RA-129-B RA-133-B RA-140-B RA-154-B RA-159-B RA-169-B RA-194-B RA-205-B RA-220-B RA-255-B RA-267-B RA-273-B RA-306-B RA-324-B RA-356-B RA-368-B

0,20 0,22 0,23 0,24 0,25 0,26 0,28 0,29 0,30 0,55 0,56 0,58 0,67 0,69 0,73 0,75 1,53 1,59 1,63 1,75 1,79 1,83 1,95 2,00 2,08 2,42 2,50 2,64 3,72 3,85 3,91 4,20 4,49 5,09 5,30

3.5.2.5



3.5.2.6

Pipe clamp Type RA

DN 15 - DN 350

Pipe clamp type RA - DN 15 - DN 350 Material 1.4571 EN 10088-3, for temperature up to 400°C

Surface After DIN 3567 Form A, other sizes on based DIN 3567 Bolt and nuts after DIN ISO 4017/4032 A4 (ISO 3506-2)


Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg

21,3 25,0 26,9 30,0 33,7 38,0 42,4 44,5 48,3 54,0 57,0 60,3 70,0 76,1 84,0 88,9

101,6 108,0 114,3 129,0 133,0 139,7 154,0 159,0 168,3 193,7 205,0 219,1 255,0 267,0 273,0 306,0 323,9 355,6 368,0

30x5 30x5 30x5 30x5 30x5 30x5 30x5 30x5 30x5 40X6 40x6 40x6 40x6 40x6 40x6 40x6 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 50x8 60x8 60x8 60x8 60x8 60x8 60x8 60x8

56 62 66 68 72 76 82 84 88 98

104 108 119 122 130 136 165 172 178 190 196 204 217 222 232 258 275 284 325 342 348 381 398 432 444

15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30

7 7 7 7 7 7 7 7 7 9 9 9 9 9 9 9 11 11 11 11 11 11 11 11 11 11 11 11 14 14 14 14 14 14 14

10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 14,0 14,0 14,0 14,0 14,0 14,0 14,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 23,0 23,0

10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 12x50 12x50 12x50 12x50 12x50 12x50 12x50 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 16x65 20x70 20x70 20x70 20x70 20x70 20x70 20x70

7,9 7,3 6,9 6,4 5,7 5,4 4,8 4,8 4,5 8,3 7,3 7,0 6,5 6,2 5,8 5,2

11,5 10,9 10,4 9,9 9,6 9,1 8,8 8,4 7,9 7,0 6,7 6,2 6,3 6,0 5,9 5,4 5,1 4,8 4,8

RA-022-V RA-025-V RA-027-V RA-030-V RA-034-V RA-038-V RA-043-V RA-045-V RA-049-V RA-054-V RA-057-V RA-061-V RA-070-V RA-077-V RA-084-V RA-089-V RA-102-V RA-108-V RA-115-V RA-129-V RA-133-V RA-140-V RA-154-V RA-159-V RA-169-V RA-194-V RA-205-V RA-220-V RA-255-V RA-267-V RA-273-V RA-306-V RA-324-V RA-356-V RA-368-V

0,20 0,22 0,23 0,24 0,25 0,26 0,28 0,29 0,30 0,55 0,56 0,58 0,67 0,69 0,73 0,75 1,53 1,59 1,63 1,75 1,79 1,83 1,95 2,00 2,08 2,42 2,50 2,64 3,72 3,85 3,91 4,20 4,49 5,09 5,30



Pipe clamp Type RB

DN 15 - DN 800

Pipe Clamp type RB - DN 15 - DN 800 Material S235JR EN 10088-3, for temperature up to 300°C

Surface After DIN 3567 Form B(DN 20-500), other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 - 8.8/8 (DIN ISO 898)

Ø Pipe BxS A C F R E d Bolt

Type without bolt

and nuts Weight

kg

21,3 25,0 26,9 30,0 33,7 38,0 42,4 44,5 48,3 57,0 60,3 76,1 88,9

108,0 114,3 133,0 139,7 159,0 168,3 193,7 219,1 267,0 273,0 323,9 355,6 368,0 406,4 419,0 457,0 508,0 521,0 559,0 610,0 711,0 813,0


70x10 70x10 70x10 70x10 70x10 90x15 90x15 90x15 90x15

56 62 66 68 72 76 82 84 88

104 108 122 136 172 178 196 204 222 232 258 284 342 348 398 432 444 498 510 550 600 614 690 740 850 950

15 15 15 15 15 15 15 15 15 18 18 18 18 24 24 24 24 24 24 24 24 30 30 30 30 30 36 36 36 36 36 45 45 45 45

7 7 7 7 7 7 7 7 7 9 9 9 9

11 11 11 11 11 11 11 11 14 14 14 14 14 18 18 18 18 18 25 25 25 25

10 10 10 10 10 10 10 10 10 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 30 30 30 30

46 46 46 46 46 46 46 46 46 54 54 54 54 70 70 70 70 70 70 70 86 86 86 86 86

104 104 104 104 104 104 104 104 104 104

11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 11,5 14,0 14,0 14,0 14,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 27,0 27,0 27,0 27,0 27,0 27,0 33,0 33,0 33,0 33,0

10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 12x50 12x50 12x50 12x50 16x65 16x65 16x65 16x65 16x65 16x65 16x65 20x70 20x70 20x70 20x70 20x70 24x90 24x90 24x90 24x90 24x90 24x90

30x120 30x120 30x120 30x120

RA-022-C RA-025-C RA-027-C RA-030-C RA-034-C RA-038-C RA-043-C RA-045-C RA-049-C RA-057-C RA-061-C RA-077-C RA-089-C RA-108-C RA-115-C RA-133-C RA-140-C RA-159-C RA-169-C RA-194-C RA-220-C RA-267-C RA-273-C RA-324-C RA-356-C RA-368-C RA-407-C RA-419-C RA-457-C RA-508-C RA-521-C RA-559-C RA-610-C RA-711-C RA-813-C

0,30 0,32 0,33 0,34 0,35 0,37 0,38 0,39 0,41 0,77 0,78 0,86 0,95 2,03 2,07 2,20 2,26 2,40 2,52 2,82 3,09 4,45 4,52 5,11 5,72 6,00 9,63 9,80 10,7 11,4 11,6 23,5 25,5 28,0 32,5

3.5.2.7



Pipe clamp Type RM

DN 50 - DN 1200

Pipe clamp type RM - DN 50 - DN 1200 Material S235JR DIN EN 10025-2, for temperature up to 300°C

Surface After DIN 3567 Form A (DN20-500), other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 - 8,8 / 8 hot-dip galvanised (DIN EN ISO 898)

Ø Pipe BxS A C F R d Bolt

Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg

57,0 60,3 76,1 88,9

108,0 114,3 133,0 139,7 159,0 168,3 193,7 219,1 267,0 273,0 323,9 355,6 368,0 406,4 419,0 457,0 508,0 521,0 610,0 711,0 813,0 914,0

1016,0 1220,0

40x8 40x8 40x8 40x8

50x10 50x10 60x10 60x10 60x10 70x10 70x15 70x15 80x15 90x15 90x15

100x15 100x15 130x20 140x20 140x20 150x20 150x20 150x20 150x20 150x20 150x20 150x20 150x20

110 120 140 150 180 190 210 220 240 250 300 320 370 380 430 470 480 550 570 600 660 680 760 860 960

1060 1160 1370

25 25 25 25 35 35 35 35 35 35 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50

12 12 12 12 12 15 15 15 15 15 15 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25

16 16 16 16 20 20 20 20 20 20 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 40

18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 23,0 27,0 27,0 27,0 27,0 27,0 27,0 27,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0

16x65 16x65 16x65 16x65 20x70 20x70 20x70 20x70 20x70 20x70 24x90 24x90 24x90 24x90 24x90 24x90 24x90

30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120

12,8 11,5 9,4 8,6

16,2 14,6 16,2 15,1 13,6 15,1 28,6 28,1 27,8 29,8 26,5 26,3 26,1 53,5 53,8 53,0 50,4 44,4 41,8 38,2 35,3 28,4 25,9 23,4

RM-057-R RM-061-R RM-077-R RM-089-R RM-108-R RM-115-R RM-133-R RM-140-R RM-159-R RM-169-R RM-194-R RM-220-R RM-267-R RM-273-R RM-324-R RM-356-R RM-368-R RM-407-R RM-419-R RM-457-R RM-508-R RM-521-R RM-610-R RM-711-R RM-813-R RM-914-R

RM-1016-R RM-1220-R

0,85 0,90 1,00 1,20 2,30 2,40 3,00 3,20 3,50 4,20 7,50 8,00 10,5 12,0 14,0 16,5 17,0 33,5 37,0 40,0 46,5 47,5 55,2 62,9 70,6 78,3 86,0

101,0

3.5.2.8



Pipe clamp Type RM

DN 50 - DN 1200

Pipe clamp type RM - DN 50 - DN 1200 Material 16Mo3 DIN EN 10028-2, for temperature up to 450°C

Surface After DIN 3567 Form A (DN20-500), other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 - GA/KG high temperature (DIN 267-13)


Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg

57,0 60,3 76,1 88,9

108,0 114,3 133,0 139,7 159,0 168,3 193,7 219,1 267,0 273,0 323,9 355,6 368,0 406,4 419,0 457,0 508,0 521,0 610,0 711,0 813,0 914,0

1016,0 1220,0

40x8 40x8 40x8 40x8

50x10 50x10 60x10 60x10 60x10 70x10 70x15 70x15 80x15 90x15 90x15

100x15 100x15 130x20 140x20 140x20 150x20 150x20 150x20 150x20 150x20 150x20 150x20 150x20

110 120 140 150 180 190 210 220 240 250 300 320 370 380 430 470 480 550 570 600 660 680 760 860 960

1060 1160 1370

25 25 25 25 35 35 35 35 35 35 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50

12 12 12 12 12 15 15 15 15 15 15 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25

16 16 16 16 20 20 20 20 20 20 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 40

18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 23,0 27,0 27,0 27,0 27,0 27,0 27,0 27,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0


30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120

10,9 9,8 8,0 7,3

13,8 12,6 13,7 12,8 11,5 12,8 24,7 24,1 23,6 25,4 22,5 22,3 22,1 45,4 45,6 40,0 42,9 35,0 33,0 30,2 27,8 28,9 26,3 23,7

RM-057-M RM-061-M RM-077-M RM-089-M RM-108-M RM-115-M RM-133-M RM-140-M RM-159-M RM-169-M RM-194-M RM-220-M RM-267-M RM-273-M RM-324-M RM-356-M RM-368-M RM-407-M RM-419-M RM-457-M RM-508-M RM-521-M RM-610-M RM-711-M RM-813-M RM-914-M

RM-1016-M RM-1220-M

0,85 0,90 1,00 1,20 2,30 2,40 3,00 3,20 3,50 4,20 7,50 8,00 10,5 12,0 14,0 16,5 17,0 33,5 37,0 40,0 46,5 47,5 55,2 62,9 70,6 78,3 86,0

101,0

Type with bolt and

nuts Weight

kg

RM-057-M-GAL RM-061-M-GAL RM-077-M-GAL RM-089-M-GAL RM-108-M-GAL RM-115-M-GAL RM-133-M-GAL RM-140-M-GAL RM-159-M-GAL RM-169-M-GAL RM-194-M-GAL RM-220-M-GAL RM-267-M-GAL RM-273-M-GAL RM-324-M-GAL RM-356-M-GAL RM-368-M-GAL RM-407-M-GAL RM-419-M-GAL RM-457-M-GAL RM-508-M-GAL RM-521-M-GAL RM-610-M-GAL RM-711-M-GAL RM-813-M-GAL RM-914-M-GAL

RM-1016-M-GAL RM-1220-M-GAL

1,16 1,21 1,31 1,51 2,86 2,96 3,56 3,76 4,06 4,76 8,51 9,01 11,5 13,0 15,0 17,5 18,0 35,6 39,1 42,1 48,6 49,6 57,3 65,0 72,7 80,4 88,1

103,1

3.5.2.9



Pipe clamp Type RM

DN 50 - DN 1200

Pipe clamp type RM - DN 50 - DN 1200 Material 13CrMo4-5 DIN EN 10028-2, for temperature up to 560°C

Surface After DIN 3567 Form A (DN20-500), other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 - GA/KG high temperature (DIN 267-13)


Hanging load [kN]

50°C

Type without bolt

and nuts Weight

kg

57,0 60,3 76,1 88,9

108,0 114,3 133,0 139,7 159,0 168,3 193,7 219,1 267,0 273,0 323,9 355,6 368,0 406,4 419,0 457,0 508,0 521,0 610,0 711,0 813,0 914,0

1016,0 1220,0

40x8 40x8 40x8 40x8

50x10 50x10 60x10 60x10 60x10 70x10 70x15 70x15 80x15 90x15 90x15

100x15 100x15 130x20 140x20 140x20 150x20 150x20 150x20 150x20 150x20 150x20 150x20 150x20

110 120 140 150 180 190 210 220 240 250 300 320 370 380 430 470 480 550 570 600 660 680 760 860 960

1060 1160 1370

25 25 25 25 35 35 35 35 35 35 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50

12 12 12 12 12 15 15 15 15 15 15 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25

16 16 16 16 20 20 20 20 20 20 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 40

18,0 18,0 18,0 18,0 23,0 23,0 23,0 23,0 23,0 23,0 27,0 27,0 27,0 27,0 27,0 27,0 27,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0 33,0


30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120 30x120

9,3 8,3 6,8 6,2 7,7 7,0 7,6 7,1 6,4 7,1

13,7 13,4 13,1 14,1 12,5 12,4 12,3 25,2 25,3 25,0 23,8 19,4 18,3 16,7 15,5 14,4 13,1 11,8

RM-057-C RM-061-C RM-077-C RM-089-C RM-108-C RM-115-C RM-133-C RM-140-C RM-159-C RM-169-C RM-194-C RM-220-C RM-267-C RM-273-C RM-324-C RM-356-C RM-368-C RM-407-C RM-419-C RM-457-C RM-508-C RM-521-C RM-610-C RM-711-C RM-813-C RM-914-C

RM-1016-C RM-1220-C

0,85 0,90 1,00 1,20 2,30 2,40 3,00 3,20 3,50 4,20 7,50 8,00 10,5 12,0 14,0 16,5 17,0 33,5 37,0 40,0 46,5 47,5 55,2 62,9 70,6 78,3 86,0

101,0

Type with bolt and

nuts Weight

kg

RM-057-C-GAL RM-061-C-GAL RM-077-C-GAL RM-089-C-GAL RM-108-C-GAL RM-115-C-GAL RM-133-C-GAL RM-140-C-GAL RM-159-C-GAL RM-169-C-GAL RM-194-C-GAL RM-220-C-GAL RM-267-C-GAL RM-273-C-GAL RM-324-C-GAL RM-356-C-GAL RM-368-C-GAL RM-407-C-GAL RM-419-C-GAL RM-457-C-GAL RM-508-C-GAL RM-521-C-GAL RM-610-C-GAL RM-711-C-GAL RM-813-C-GAL RM-914-C-GAL

RM-1016-C-GAL RM-1220-C-GAL

1,16 1,21 1,31 1,51 2,86 2,96 3,56 3,76 4,06 4,76 8,51 9,01 11,5 13,0 15,0 17,5 18,0 35,6 39,1 42,1 48,6 49,6 57,3 65,0 72,7 80,4 88,1

103,1

3.5.2.10



Pipe clamp Type RD

DN 15 - DN 400

Pipe clamp type RD - DN 15 - DN 1200 - for piping with thin isolation Material S235JR DIN EN 10025-2, for temperature up to 300°C

Surface After DIN 3567 Form A (DN20-500), other sizes based on DIN 3567 Bolt and nuts after DIN ISO 4017/4032 - 8,8/8 hot-dip galvanised (DIN EN ISO 898)

BxS A C F Imin R d Bolt Type

without bolt and nuts

Weight kg

1/2” 3/4” 1”

1 1/2” 2” 3” 4” 6” 8” 10” 12” 14” 16”

21,3 26,9 33,7 48,3 60,3 88,9

114,3 168,3 219,1 273,0 323,9 355,6 406,4

40x5 40x5 40x5 40x5 40x5 40x5 40x5 50x6 50x6 50x6 60x8 60x8 60x8

62 67 73 89

104 130 156 214 264 318 380 412 462

15 15 15 15 15 15 15 15 15 15 18 18 18

10 10 10 10 10 10 11 11 11 14 14 14 18

35 35 35 35 35 35 35 35 35 35 40 40 40

7 7 7 7 7 7 7 9 9 9 12 12 12

12 12 12 12 12 12 12 12 12 12 14 14 14

10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 10x40 12x50 12x50 12x50

RD-022-R RD-027-R RD-034-R RD-049-R RD-061-R RD-089-R RD-115-R RD-169-R RD-220-R RD-273-R RD-324-R RD-356-R RD-407-R

0,29 0,32 0,34 0,41 0,48 0,60 0,73 1,49 1,87 2,25 4,26 4,66 5,22

Ø Pipe

3.5.2.11



3.5.2.14

U-bolts Type RSB

DN 15 - DN 60

U-bolts type RSB - DN 15 - DN 600 Material S235JR DIN EN 10025-2, for temperature up to 300°C

Surface DIN 3570, hot-dip galvanised Nuts in DIN ISO 4032-8 (DIN EN ISO 898) Materiale A4 DIN EN 10025-2, for temperature up to 400°C

Overflade DIN 3570, no surface treatment Nuts in DIN ISO 4032-A4 (ISO 3506-2)

For pipe diameter Nom. Pipe DS B L H Bolt Type

without nuts Type

without nuts Weight

kg

25,0 30,0 38,0 44,5 57,0 70,0 84,0

101,6 133,0 159,0

205,0 267,0 306,0 355,6 406,4

508,0

- 21,3 - 26,9 - 33,7 - 42,4 - 48,3 - 60,3 - 76,1 - 88,9 - 114,3 - 139,7 - 168,3 - 193,7 - 219,1 - 273,0 - 323,9 - 368,0 - 419,0 - 457,0 - 521,0 - 609,0

15 20 25 32 40 50 65 80

100 125 150 175 200 250 300 350 400 450 500 600

23 30 38 46 52 64 82 94

120 148 176 202 228 282 332 378 428 476 530 628

33 40 48 56 62 76 94

106 136 164 192 218 248 302 352 402 452 500 554 652

44 45 47 53 56 65 72 79 95

101 113 138 149 173 199 222 249 280 300 362

65 70 76 86 92

107 125

138171 191 217 249 283 334 385 435 487 542 585 700

10x40 10x40 10x40 10x50 10x50 12x50 12x50 12x50 16x60 16x60 16x60 16x60 20x70 20x70 20x70 24x70 24x70 24x70 24x70 24x70

RSB-015-V RSB-020-V RSB-025-V RSB-032-V RSB-040-V RSB-050-V RSB-065-V RSB-080-V RSB-100-V RSB-125-V RSB-150-V RSB-175-V RSB-200-V RSB-250-V RSB-300-V RSB-350-V RSB-400-V RSB-450-V RSB-500-V RSB-600-V

RSB-015-A4 RSB-020-A4 RSB-025-A4 RSB-032-A4 RSB-040-A4 RSB-050-A4 RSB-065-A4 RSB-080-A4 RSB-100-A4 RSB-125-A4 RSB-150-A4 RSB-175-A4 RSB-200-A4 RSB-250-A4 RSB-300-A4 RSB-350-A4 RSB-400-A4 RSB-450-A4 RSB-500-A4 RSB-600-A4

0,11 0,12 0,13 0,14 0,15 0,24 0,27 0,30 0,67 0,74 0,83 0,93 1,66 1,94 2,20 3,55 3,94 4,28 4,70 5,45



3.5.2.15

Technical modifications reserved 04-1

6-24

2

Material Nr. DIN 20°/50° 100° 150° 200° 250° 300° 350° 400° 450° 500° 520° 540° 560° S235JR 1.0038 EN 10025-2 1,00 0,80 0,74 0,69 0,62 0,52 16Mo3 1.5415 EN 10028-2 1,55 1,47 1,43 1,38 1,27 1,11 1,00 0,94 0,88 13CrMo4-5 1.7335 EN 10028-2 1,77 1,70 1,65 1,60 1,48 1,36 1,25 1,19 1,14 1,00 0,67 0,41 0,27

X10CrNiTi 18 10 1.4541 DIN 17440 1,00 0,93 0,88 0,83 0,77 0,72 0,68 0,66 X10CrNiMoTi 18 10 1.4571 DIN 17440 1,00 0,90 0,86 0,81 0,76 0,70 0,68 0,66

Conversion in the catalouge for the applied load value at other temperatures. (Loads should only by converted for the same material, never from one material to another)

10CrMo9-10 1.7380 EN 10028-2 1,42 1,39 1,35 1,32 1,26 1,21 1,16 1,11 1,04 1,00 0,77 0,56 0,38

Technical information

Expert advice With our many years of experience as suppliers to the pipeline and plant construction industries we are well placed to assist you with expert advice on the design and detail for large-scale projects including can provide tailor made solutions for specific problems and appli-cations. Loads The calculation loads mentioned in this document were made with statically models under certain conditions and parameters. All possible care is taken compliance and applicable technical regulations and applicable standards, guarantees are given against the loads for the static cases shown in the catalog, these are approximate values. Liabilities for the particular application cannot be derived. Any unauthorized vaqriations or changes would invalidate any warranty and guar-antee on our part. Materials The materials and characteristics are in accordance to the corresponding stand-ards and should be used as the minimum requirement. For the characteristics and quality, Bernecker would only accept warranty in combination with an inspec-tion certificate 3.1 Special design For your individual requirements we also offer special pipe supports. Either as a variant production through the use of other: - materials (e.g. P265GH, P275NL1) - coatings (e.g. Duplex) - diameter (e.g. RA-102-R) - lengths (e.g. GLY-200/324L500-RB3) - heights (e.g. GLY-75/324-RB3) or according to your specifications rou-tines or static specification.

SI units The psysical quantities are stated in SI units as follows: - Dimensions in mm - Loads in kN - Temperatures at 80° - Weights in kg in not stated otherwise. General tolerances The general tolerances are for lengths, angles, shape and location in accordance with ISO 2768-ck. Heat treatment We can hot form and heat treat compo-nents to order, e.g. stress-free annealing, normalizing or hardening of high temper-ature materials. On request we supply a diagram of the heat treatment and tem-perature curve of the heat treated compo-nents supplied. Corrosion protection and surface finishes - The corrosion protection of our components in accordance with DIN EN ISO 12944. - Hot-dip galvanized components are standard galvanized to DIN EN ISO 1461. - According to your needs and specifica tions we can also provide our compo nent parts with the following surface treatment: Sanding, pickling, oiling, basic coating, painting or galvanic sur face treatment. Prefabrication service supplied com-plete to site As a specialist manufacturer in the field of pipe supports we can fabricate all sup-ports and ancillaries for you ready to install, complete with labeling, to order. Prefabricated and labeled components enable a quick and efficient assembly and save time on site.

Acceptance/Certificate On request we can supply our pipe sup-port products with acceptance test certifi-cates to DIN EN 50049 3.1 or with factory certificates to DIN EN 10204 2.2. We can arrange for acceptance tests to be carried out by the TÜV or other in-spectorate on our premises if required. Inspections by our customers can be arranged at any time. Our safety is your guarantee We operate in a quality assurance sys-tem that is certified to DIN ISO 9001, which means that we have a formally written and approved Quality Manage-ment Manual (QMH). This is your guaran-tee that we will turn your specifications and requirements into a fully functional and reliable system that is right for the job. Registrations (Status in 05/2012) QS - DIN ISO 9001:2008 TÜV - AD2000 W-0 DVS - General certificate of qualifica-tion to DIN 18 800-7 TÜV - Components registration KWU QS - KTA 1401 Legal notice With the publication of this catalog super-sedes previous editions. This catalog is protected by copyright. Any reproduction is, in whole or in part, only legal with the permission of the publisher. For any typo-graphical errors, product changes due to technical developments and changing model no liability is accepted. In addition, all components must be used accordingly to purposes.

pipe clamp - cobalch aps › wp-content › uploads › 2020 › 03 › 3521gb.pdf · pipe clamp...

Documents