pj358-1 user guide, english - projectorcentral · shock, do not expose th s apparatus to ra n or mo...

PJ358LCD Projector

ViewSonic®

Model No. : VS11611

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

-Руководствопользователя

- 使用手冊 (繁體)

- 使用手冊 (簡體)

�ViewSonic PJ358

Compliance InformationFor U.S.A.

Th�sdev�cecompl�esw�thpart15ofFCCRules.Operat�on�ssubjecttothefollow�ngtwocond�t�ons:(1)th�sdev�cemaynotcauseharmful�nterference,and(2)th�sdev�cemustacceptany�nterferencerece�ved,�nclud�ng�nterferencethatmaycauseundes�redoperat�on.Th�sequ�pmenthasbeentestedandfoundtocomplyw�ththel�m�tsforaClassBd�g�taldev�ce,pursuanttopart15oftheFCCRules.Thesel�m�tsaredes�gnedtoprov�dereasonableprotect�onaga�nstharmful�nterference�nares�dent�al�nstallat�on.Th�sequ�pmentgenerates,uses,andcanrad�aterad�ofrequencyenergy,and�fnot�nstalledandused�naccordancew�ththe�nstruct�ons,maycauseharmful�nterferencetorad�ocommun�cat�ons.However,there�snoguaranteethat�nterferencew�llnotoccur�napart�cular�nstallat�on.Ifth�sequ�pmentdoescauseharmful�nterferencetorad�oortelev�s�onrecept�on,wh�chcanbedeterm�nedbyturn�ngtheequ�pmentoffandon,theuser�sencouragedtotrytocorrectthe�nterferencebyoneormoreofthefollow�ngmeasures:

• Reor�entorrelocatetherece�v�ngantenna.

• Increasetheseparat�onbetweentheequ�pmentandrece�ver.

• Connecttheequ�pment�ntoanoutletonac�rcu�td�fferentfromthattowh�chtherece�ver�sconnected.

• Consultthedealeroranexper�encedrad�o/TVtechn�c�anforhelp.

Warning: You are cautioned that changes or modifications not expressly approved by the partyrespons�bleforcompl�ancecouldvo�dyourauthor�tytooperatetheequ�pment.

For Canada

• Th�sClassBd�g�talapparatuscompl�esw�thCanad�anICES-003.

• Cetappare�lnumér�quedelaclasseBestconformeàlanormeNMB-003duCanada.

CE Conformity for European Countries

Thedev�cecompl�esw�ththerequ�rementsoftheEECd�rect�ve89/336/EECasamendedby92/31/EECand93/68/EECArt.5w�thregardto“Electromagnet�ccompat�b�l�ty”,and73/23/EECasamendedby93/68/EECArt.13w�thregardto“Safety.”

Following information is only for EU-member states:

Themarkshowntother�ght�s�ncompl�ancew�ththeWasteElectr�calandElectron�cEqu�pmentD�rect�ve2002/96/EC(WEEE).

Themark�nd�catestherequ�rementNOTtod�sposetheequ�pmentasunsortedmun�c�palwaste,butusethereturnandcollect�onsystemsaccord�ngtolocallaw.

��ViewSonic PJ358

Important Safety Instructions

1. Readthese�nstruct�onscompletelybeforeus�ngtheequ�pment.

2. Keepthese�nstruct�ons�nasafeplace.

3. Heedallwarn�ngs.

4. Followall�nstruct�ons.

5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock,donotexposeth�sapparatustora�normo�sture.

6. Cleanw�thasoft,drycloth.Iffurtherclean�ng�srequ�red,see“Clean�ngtheD�splay”�nth�sgu�deforfurther�nstruct�ons.

7. Donotblockanyvent�lat�onopen�ngs.Installtheequ�pment�naccordancew�ththemanufacturer’s�nstruct�ons.

8. Donot�nstallnearanyheatsourcessuchasrad�ators,heatreg�sters,stoves,orotherdevices (including amplifiers) that produce heat.

9. Donotattempttoc�rcumventthesafetyprov�s�onsofthepolar�zedorground�ng-typeplug.Apolar�zedplughastwobladesw�thonew�derthantheother.Aground�ngtypeplughastwobladesandath�rdground�ngprong.Thew�debladeandtheth�rdprong are provided for your safety. If the plug does not fit into your outlet, consult an electr�c�anforreplacementoftheoutlet.

10. Protectthepowercordfrombe�ngtreaduponorp�nched,part�cularlyattheplug,andthepo�ntwhere�femergesfromtheequ�pment.Besurethatthepoweroutlet�slocatedneartheequ�pmentsothat�t�seas�lyaccess�ble.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,orsoldw�ththeequ�pment.Whenacart�sused,usecaut�onwhenmov�ngthecart/equ�pmentcomb�nat�ontoavo�d�njuryfromt�pp�ngover.

13. Unplugth�sequ�pmentwhen�tw�llbeunusedforlongper�odsoft�me.

14. Refer all servicing to qualified service personnel. Service is required when the unit has beendamaged�nanyway,suchas:�fthepower-supplycordorplug�sdamaged,�fl�qu�d�ssp�lledontoorobjectsfall�ntotheun�t,�ftheun�t�sexposedtora�normo�sture,or�ftheun�tdoesnotoperatenormallyorhasbeendropped.

��ViewSonic PJ358

Declaration of RoHS Compliance

Th�sproducthasbeendes�gnedandmanufactured�ncompl�ancew�thD�rect�ve2002/95/ECoftheEuropeanParl�amentandtheCounc�lonrestr�ct�onoftheuseofcerta�nhazardoussubstances�nelectr�calandelectron�cequ�pment(RoHSD�rect�ve)and�sdeemedtocomplyw�ththemax�mumconcentrat�onvalues�ssuedbytheEuropeanTechn�calAdaptat�onComm�ttee(TAC)asshownbelow:

Substance Proposed Maximum Concentration Actual Concentration

Lead(Pb) 0.1% <0.1%

Mercury(Hg) 0.1% <0.1%

Cadm�um(Cd) 0.01% <0.01%

HexavalentChrom�um(Cr6+) 0.1% <0.1%

Polybrom�natedb�phenyls(PBB) 0.1% <0.1%

Polybrom�natedd�phenylethers(PBDE) 0.1% <0.1%

Certa�ncomponentsofproductsasstatedaboveareexemptedundertheAnnexoftheRoHSD�rect�vesasnotedbelow:

Examplesofexemptedcomponentsare:

1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electron�cceram�cparts(e.g.p�ezoelectron�cdev�ces).

3.Lead�nh�ghtemperaturetypesolders(�.e.lead-basedalloysconta�n�ng85%bywe�ghtormorelead).

4.Leadasanallott�ngelement�nsteelconta�n�ngupto0.35%leadbywe�ght,alum�n�umconta�n�ngupto0.4%leadbywe�ghtandasacooperalloyconta�n�ngupto4%leadbywe�ght.

ivViewSonic PJ358

Copyright InformationCopyright©ViewSonic®Corporation,2006.Allrightsreserved.

MacintoshandPowerMacintoshareregisteredtrademarksofAppleComputer,Inc.

Microsoft,Windows,WindowsNT,andtheWindowslogoareregisteredtrademarksofMicrosoftCorporationintheUnitedStatesandothercountries.

ViewSonic,thethreebirds’logo,OnView,ViewMatch,andViewMeterareregisteredtrademarksofViewSonicCorporation.

VESAisaregisteredtrademarkoftheVideoElectronicsStandardsAssociation.DPMSandDDCaretrademarksofVESA.

PS/2,VGAandXGAareregisteredtrademarksofInternationalBusinessMachinesCorporation.

Disclaimer:ViewSonicCorporationshallnotbeliablefortechnicaloreditorialerrorsoromissionscontainedherein;norforincidentalorconsequentialdamagesresultingfromfurnishingthismaterial,ortheperformanceoruseofthisproduct.

Intheinterestofcontinuingproductimprovement,ViewSonicCorporationreservestherightto change product specifications without notice. Information in this document may change withoutnotice.

Nopartofthisdocumentmaybecopied,reproduced,ortransmittedbyanymeans,foranypurposewithoutpriorwrittenpermissionfromViewSonicCorporation.

Product RegistrationTomeetyourfutureneeds,andtoreceiveanyadditionalproductinformationasitbecomesavailable,pleaseregisteryourproductontheInternetat:www.viewsonic.com.TheViewSonicWizardCD-ROMalsoprovidesanopportunityforyoutoprinttheregistrationform,whichyoumaymailorfaxtoViewSonic.

For Your RecordsProduct Name:

Model Number:Document Number:Serial Number:Purchase Date:

PJ358ViewSonicLCDProjectorVS11611PJ358-1_UG_ENGRev.1B10-25-06

Personal Identification Number (PIN):Thelampinthisproductcontainsmercury.Pleasedisposeofinaccordancewithlocal,stateorfederallaws.

1ViewSonic PJ358

Projector

PJ358 User's Manual – Operating Guide

Contentsofpackage

(1) Projector(2) Remote controlwithtwoAAbatteries(3) Power cord(4) RGB cable(5) Soft case(6) Quick Start GuideandViewSonicWizardCD(7) Lens cover, Rivet and Strap

NOTE•Keeptheoriginalpackingmaterialsforfuturereshipment.Formovingtheprojector,besuretousetheoriginalpackingmaterials.Usespecialcautionforthelenspart.

WARNING►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” first.Afterreadingthem,storetheminasafeplaceforfuturereference.

AboutthismanualVarioussymbolsareusedinthismanual.Themeaningsofthesesymbolsaredescribedbelow.

WARNING Thissymbolindicatesinformationthat,ifignored,couldpossiblyresultinpersonalinjuryorevendeathduetoincorrecthandling.

CAUTION Thissymbolindicatesinformationthat,ifignored,couldpossiblyresultinpersonalinjuryorphysicaldamageduetoincorrecthandling.

Pleaserefertothepageswrittenfollowingthissymbol.

NOTE•Theinformationinthismanualissubjecttochangewithoutnotice.•Themanufacturerassumesnoresponsibilityforanyerrorsthatmayappearinthismanual.•Thereproduction,transferorcopyofalloranypartofthisdocumentisnotpermittedwithoutexpresswrittenconsent.

Trademark acknowledgment•MacisregisteredtrademarksofAppleComputer,Inc.•VESAandSVGAaretrademarksoftheVideoElectronicsStandardAssociation.•WindowsisaregisteredtrademarkofMicrosoftCorporation.

Allothertrademarksarethepropertiesoftheirrespectiveowners.

(1)

HOME PAGEUP

PAGEDOWNEND

VIDEO RGB SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONE

POSITION

ESC

ENTER

MENU

RESET

(2)

(3) (5)

(7)

(4)

(6)

2ViewSonic PJ358

About this manual . . . . . . . . . . 1Content . . . . . . . . . . . . . . . . . . 2Projector features . . . . . . . . . . 3Preparations . . . . . . . . . . . . . . 3

Contentsofpackage. . . . . . . . . . . . .3 Fasten�ngthelenscover. . . . . . . . . .3Replacing the filter cover for bottom-upuse . . . . . . . . . . . . . . . .3

Part names . . . . . . . . . . . . . . . 4 Projector . . . . . . . . . . . . . . . . . . . . . .4Controlpanel. . . . . . . . . . . . . . . . . . .5Remotecontrol . . . . . . . . . . . . . . . . .5

Setting up . . . . . . . . . . . . . . . . 6 Arrangement. . . . . . . . . . . . . . . . . . .6 Connect�ngyourdev�ces. . . . . . . . . .8Us�ngaUSBstorage. . . . . . . . . . . .10Connect�ngpowersupply . . . . . . . .10 Us�ngthesecur�tyslot. . . . . . . . . . .10

Remote control . . . . . . . . . . . 11Putt�ngbatter�es . . . . . . . . . . . . . . .11Abouttheremotecontrols�gnal. . . .11Chang�ngthefrequencyofremote

controls�gnal. . . . . . . . . . . . . . . . .12Us�ngasa

s�mplePCmouse&keyboard . . .12Power on/off . . . . . . . . . . . . . 13

Turn�ngonthepower. . . . . . . . . . . .13Turn�ngoffthepower. . . . . . . . . . . .13

Operating . . . . . . . . . . . . . . . 14 Adjust�ngthevolume. . . . . . . . . . . .14Temporar�lymut�ngthesound. . . . .14Select�ngan�nputs�gnal. . . . . . . . .14Search�ngan�nputs�gnal . . . . . . . .15Select�nganaspectrat�o. . . . . . . . .15Adjust�ngtheprojector'selevator . .16 Adjust�ngthezoomandfocus. . . . .16Us�ngtheautomat�cadjustmentfeature. .17Adjust�ngthepos�t�on . . . . . . . . . . .17Correct�ngthekeystoned�stort�ons. .18Us�ngthemagn�fyfeature. . . . . . . .18Freez�ngthescreen. . . . . . . . . . . . .19Temporar�lyblank�ngthescreen. . .19Us�ngthemenufunct�on. . . . . . . . .20

Content

Content

EASY MENU . . . . . . . . . . . . . . 21Aspect,Auto keystone execute,Keystone ,Picture mode,Brightness,Contrast,Color,Tint,Sharpness,Whisper,Mirror,Reset,Filter time,Language, GotoAdvancedMenu...

PICTURE menu . . . . . . . . . . . 23Brightness,Contrast,Gamma,Color temp,Color,Tint,Sharpness,My memory

IMAGE menu . . . . . . . . . . . . . 26Aspect,Over scan,V position,H position,H phase,H size,Auto adjust execute

INPUT menu . . . . . . . . . . . . . 28Progressive,Video nr,Color space,Video format,Frame lock,Computer in,Resolution

SETUP menu . . . . . . . . . . . . . 31Auto keystone execute,Keystone ,Whisper,Mirror,Volume,Audio

SCREEN menu . . . . . . . . . . . . 33Language,Menu position,Blank,Start up,MyScreen,MyScreenLock,Message,Source name

OPTION menu . . . . . . . . . . . . 37Auto search,Auto keystone ,Auto on,Auto off,Lamp time,Filter time,My button,Service,Security,Usb storage

USB STORAGE . . . . . . . . . . . . 48Maintenance . . . . . . . . . . . . . 57

Lamp. . . . . . . . . . . . . . . . . . . . . . . .57Air filter . . . . . . . . . . . . . . . . . . . . . .59Othercare. . . . . . . . . . . . . . . . . . . .60

Troubleshooting . . . . . . . . . . 61 Relatedmessages. . . . . . . . . . . . . .61Regard�ngthe�nd�catorlamps. . . . .62Phenomenathatmaybeeasy

tobem�stakenformach�nedefects. .64Specifications . . . . . . . . . . . . 66

3ViewSonic PJ358

Fastening the lens coverToavo�dlos�ngthelenscover,pleasefastenthelenscovertotheprojectorus�ngtheenclosedstrap.

1.F�xthestraptothestrapholeofthelenscover.Threadoneendofthestrapthroughthestrap

holeofthelenscoverandmaketheloopattheend,andlettheotherendofthestrapthroughtheloop.Nothaveaknot�nthestrapate�therend.

2.F�xthestraptothestrapholeoftheprojector.Threadtheotherendofthestrapthroughthestrapholeoftheprojectorandmake

theloopthere.Letthelenscoverw�ththeoneendofstrapthoughtheloop.

Projector features / Preparations

ProjectorfeaturesTh�sprojectorhasacapab�l�tytoprojectvar�ousp�ctures�gnalsontoascreen.Th�sprojectorrequ�resonlyam�n�malamountofspacefor�nstallat�onandcanproducealargeprojected�magefromevenashortd�stance.This projector also can give a benefit to mobile users and others by offering a spec�alfunct�onnamed“PClesspresentat�on”.Evenw�thoutPC,th�sprojectorreal�zesthed�splayonscreen,gett�ngJPEG,MPEGandMot�on-JPEGp�cturesfromUSBstoragemed�a.

Preparat�ons

Contents of packagePleaseseethe“Contentsofpackage”�nthe“User’sManual(conc�se)”wh�ch�sabook.Yourprojectorshouldcomew�ththe�temsshownthere.Contact�mmed�atelyyourdealer�fanyth�ng�sm�ss�ng.

NOTE•Keeptheor�g�nalpack�ngmater�als,forfutureresh�pment.Besuretousetheor�g�nalpack�ngmater�alswhenmov�ngtheprojector.Usespec�alcaut�onforthelens.

Replacing the filter cover for bottom-up useFor the projector installed bottom-up, please replace the filter cover with the enclosed filter cover for bottom-up use, to keep necessaryvent�lat�onspace.Please refer to the “Air filter” for how to detach and attach a filter cover.

WARNING►Consult with your dealer before aspec�al�nstallat�onsuchassuspend�ngfromace�l�ng.

Straphole

Straphole

F�ltercover

4ViewSonic PJ358

Part names

Partnames

Projector(1)Lampcover

Thelampun�t�s�ns�de.(2)Focusr�ng(3)Zoomr�ng(4)Controlpanel(5)Speaker(6)Elevatorknobs(x2)(7)Elevatorfeet(x2)(8)Lens(9)Lenscover(10)Intakevents(11)F�ltercover

The air filter and intake vent are �ns�de.

(12)Exhaustvents(13)AC�nlet(14)VIDEOport(15)S-VIDEOport(16)Secur�tyslot(17)COMPUTERIN1port(18)Shutdownsw�tch(19)COMPUTERIN2port(20)USBport(21)USBSTORAGEport(22)AUDIOOUTport(23)AUDIOINport

WARNING►HOT! :Donottoucharoundthelampcoverandtheexhaustventsdur�nguseorjustafteruse,s�nce�t�stoohot.►Do not look into the lens or vents while the lamp is on, since the strong light �snotgoodforyoureyes.►Do not handle the elevator knobs without holding the projector, since the projectormaydropdown.

CAUTION►Ma�nta�nnormalvent�lat�ontopreventtheprojectorfromheat�ngup.Donotcover,blockorplugupthevents.Donotplaceanyth�ngthatcanst�ckorbe sucked to the vents, around the intake vents. Clean the air filter periodically.►Do not use the security slot to prevent the projector from falling down, since it �snotdes�gnedfor�t.►Use the shutdown switch only when the projector is not turned off by normal procedure,s�ncepush�ngth�ssw�tchstopsoperat�onoftheprojectorw�thoutcool�ng�tdown.

HOT!

K

COMPUTER IN1 COMPUTER IN2USB USB STORAGE

DC 5V 0.5A

AUDIO OUT

AUDIO INS-VIDEOVIDEO

K

COMPUTER INUSBUSB STORAGE

DC 5V 0.5A

AUDIO OUT


LAN

HOT! (1) (2) (3) (4)

(7)(10)

(9) (8) (11)

(6)(7)

(5)

(12)

(13)

(15) (16) (17) (18) (19) (20) (21) (22) (23)(14)

(Bottom)

5ViewSonic PJ358

Part names

Control panel(1)STANDBY/ONbutton(2)INPUT/ENTERbutton(3)MENUbutton

Itcons�stsoffourcursorbuttons.(4)POWER�nd�cator(5)TEMP�nd�cator(6)LAMP�nd�cator

Remote control(1)VIDEObutton(2)COMPUTER/STORAGEbutton(3)SEARCHbutton(4)STANDBY/ONbutton(5)ASPECTbutton(6)AUTObutton(7)BLANKbutton(8)MAGNIFY-ONbutton(9)MAGNIFY-OFFbutton(10)HOMEbutton(11)ENDbutton(12)PAGEUPbutton(13)PAGEDOWNbutton(14)VOLUMEbutton(15)MUTEbutton(16)FREEZEbutton(17)MYBUTTON-1button(18)MYBUTTON-2button(19)KEYSTONEbutton(20)POSITIONbutton(21)MENUbutton(22) ▲/▼/◄/► cursor buttons(23)ENTERbutton(24)ESCbutton(25)RESETbutton(26)Batterycover

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

(2)

(1)(5)

(10)(8)(9)(11)(16)(17)(20)(22)

(24)

(3)(4)(6)(7)

(12)(14)(15)(13)(19)(18)(21)

(23)(25)

(26)

Backoftheremotecontrol

MENU

LAMP

TEMP

POWER

STANDBY/ONINPUT/ENTER

(1) (2) (3) (4) (5) (6)

6ViewSonic PJ358

(a)

(b)

(a) (c) up

(c) down

(b)

(c) up

(c) down

Setting up

Sett�ngupInstalltheprojectoraccord�ngtotheenv�ronmentandmannertheprojectorw�llbeused�n.

ArrangementRefertothe�llustrat�onsandtablesbelowtodeterm�nescreens�zeandproject�ond�stance.Thevaluesshown�nthetablearecalculatedforafulls�zescreen:1024×768.(a)Screens�ze(d�agonal)(b)Project�ond�stance(±10%)(c)Screenhe�ght(±10%)

On a horizontal surface

Suspended from the ceiling

•Keepaspaceof30cmormorebetweenthes�desoftheprojectorandotherobjectssuchaswalls.•Consultw�thyourdealerbeforeaspec�al�nstallat�onsuchassuspend�ngfromace�l�ng.

(a)

(b)

(a) (c) up

(c) down

(b)

(c) up

(c) down

(a) Screen size

(diagonal)

4:3screen 16:9screen(b) Projection distance (c) Screen height (b) Projection distance (c) Screen height

m�n. max. down up m�n. max. down upinch m m inch m inch cm inch cm inch m inch m inch cm inch cm inch30 0.8 0.8 30 0.9 36 7 3 39 15 0.8 33 1.0 39 1 0 37 1440 1.0 1.0 40 1.2 48 9 3 52 21 1.1 44 1.3 53 1 0 49 1950 1.3 1.3 50 1.5 61 11 4 65 26 1.4 55 1.7 66 1 1 61 2460 1.5 1.5 61 1.9 73 13 5 78 31 1.7 66 2.0 79 2 1 73 2970 1.8 1.8 71 2.2 85 15 6 91 36 2.0 77 2.4 93 2 1 85 3480 2.0 2.1 81 2.5 97 17 7 105 41 2.2 88 2.7 106 2 1 97 3890 2.3 2.3 91 2.8 110 20 8 118 46 2.5 100 3.0 120 2 1 110 43

100 2.5 2.6 102 3.1 122 22 9 131 51 2.8 111 3.4 133 3 1 122 48120 3.0 3.1 122 3.7 147 26 10 157 62 3.4 133 4.1 160 3 1 146 58150 3.8 3.9 153 4.7 183 33 13 196 77 4.2 166 5.1 200 4 2 183 72200 5.1 5.2 204 6.2 245 44 17 261 103 5.6 222 6.8 267 5 2 243 96250 6.4 6.5 255 7.8 306 54 21 327 129 7.1 278 8.5 334 7 3 304 120300 7.6 7.8 306 9.3 368 65 26 392 154 8.5 334 10.2 400 8 3 365 144

7ViewSonic PJ358

Setting up

WARNING►Placetheprojector�nastablehor�zontalpos�t�on.Iftheprojectorfallsor�sknockedover�tcouldcause�njuryand/ordamagetotheprojector. Using a damaged projector could then result in fire and/or electric shock.•Donotplacetheprojectoronanunstable,slantedorv�brat�onalsurfacesuch

asawobblyor�ncl�nedstand.•Donotplacetheprojectoron�tss�de,frontorrearpos�t�on.•Consultw�thyourdealerbeforeaspec�al�nstallat�onsuchassuspend�ng

fromace�l�ng.►Place the projector in a cool place, and ensure that there is sufficient ventilation. The high temperature of the projector could cause fire, burns and/ormalfunct�onoftheprojector.•Donotstop-up,blockorotherw�secovertheprojector'svents.•Keepaspaceof30cmormorebetweenthes�desoftheprojectorandother

objectssuchaswalls.•Donotplacetheprojectoronmetall�cth�ngoranyth�ngweak�nheat.•Donotplacetheprojectoroncarpet,cush�onsorbedd�ng.•Donotplacetheprojector�nd�rectsunl�ghtornearhotobjectssuchas

heaters.•Donotanyth�ngneartheprojectorlensorvents,orontopoftheprojector.•Donotplaceanyth�ngthatmaybesucked�ntoorst�cktotheventsonthe

bottomoftheprojector.Th�sprojectorhassome�ntakeventsalsoonthebottom.

►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shockand/ormalfunct�onoftheprojector.•Donotplacetheprojector�nabathroomortheoutdoors.•Donotplaceanyth�ngconta�n�ngl�qu�dneartheprojector.

CAUTION►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunct�onoftheprojector.•Donot place the projector near humidifiers, smoking spaces or a kitchen.►Position the projector to prevent light from directly hitting the projector's remotesensor.

8ViewSonic PJ358

Setting up

Connecting your devicesBesuretoreadthemanualsfordev�cesbeforeconnect�ngthemtotheprojector.Makesurethatallthedev�cesaresu�tabletobeconnectedw�thth�sproduct,andpreparethecablesrequ�redtoconnect.Pleaserefertothefollow�ng�llustrat�onstoconnectthem.

WARNING►Do not disassemble or modify the projector and accessories.►Be careful not to damage the cables, and do not use damaged cables.

CAUTION►Turn off all devices and unplug their power cords prior to connect�ngthemtoprojector.Connect�ngal�vedev�cetotheprojectormaygenerateextremelyloudno�sesorotherabnormal�t�esthatmayresult�nmalfunct�onordamagetothedev�ceandtheprojector.►Use appropriate accessory or otherwise designed cables. Ask your dealer about non-accessory cables which may have to be of a specific length or equ�ppedw�thacore.Forcablesw�thacoreonlyatoneend,connecttheendw�ththecoretotheprojector.►Make sure that devices are connected to the correct ports. An incorrect connect�onmayresult�nmalfunct�onordamagetothedev�ceandtheprojector.

NOTE•TheCOMPUTERIN1portcansupportacomponents�gnalalso.Formore�nformat�on,pleaseseethedescr�pt�onoftheCOMPUTERIN�temoftheINPUTmenu.

K


DC 5V 0.5A

AUDIO OUT


AUDIOOUTRGB OUT AUDIO

INUSB-AAUDIOOUTRGB OUT

VIDE

O OU

TAU

DIO

OUT

L

R

K


DC 5V 0.5A

AUDIO OUT


LAN

AUDI

OOU

TRG

B OU

T

AUDIOIN

USB-

A

VIDEO OUT S-VIDEO OUT AUDIO OUTL R

AUDIO OUTL R

LAN

S-VIDEO OUTAUDIO OUTL R

AUDI

O OU

TL

RCO

MPON

ENT

CR/P

R C

B /PB

Y

AUDIO OUTL R

COMPONENTCR/PR CB/PB Y

PC Speakers

VCR/DVD player

USBstorage

9ViewSonic PJ358

Setting up

NOTE•Besuretoreadthemanualsfordev�cesbeforeconnect�ngthemtotheprojector,andmakesurethatallthedev�cesaresu�tabletobeconnectedw�thth�sproduct.Beforeconnect�ngtoaPC,checkthes�gnallevel,thes�gnalt�m�ng,andtheresolut�on.-Somes�gnalmayneedanadapterto�nputth�sprojector.-SomePCshavemult�plescreend�splaymodesthatmay�ncludesomes�gnalswh�ch

arenotsupportedbyth�sprojector.-Althoughtheprojectorcand�splays�gnalsw�thresolut�onuptoUXGA(1600X1200),

thes�gnalw�llbeconvertedtotheprojector’spanelresolut�onbeforebe�ngd�splayed.Thebestd�splayperformancew�llbeach�eved�ftheresolut�onsofthe�nputs�gnalandtheprojectorpanelare�dent�cal.

• While connecting, make sure that the shape of the cable's connector fits the port to connectw�th.Andbesuretot�ghtenthescrewsonconnectorsw�thscrews.•Whenconnect�ngalaptopPCtotheprojector,besuretoact�vatethePC’sexternalRGBoutput.(SetthelaptopPCtoCRTd�splayortos�multaneousLCDandCRTd�splay.)Fordeta�lsonhowth�s�sdone,pleaserefertothe�nstruct�onmanualofthecorrespond�nglaptopPC.•Whenthep�ctureresolut�on�schangedonapcdepend�ngonan�nput,automat�cadjustmentfunct�onmaytakesomet�meandmaynotbecompleted.Inth�scase,youmaynotbeabletoseeacheckboxtoselect“Yes/No”forthenewresolut�ononW�ndows.Thentheresolut�onw�llgobacktotheor�g�nal.Itm�ghtberecommendedtouseotherCRTorLCDmon�torstochangetheresolut�on.•Insomecases,th�sprojectormaynotd�splayaproperp�ctureord�splayanyp�ctureonscreen.Forexample,automat�cadjustmentmaynotfunct�oncorrectlyw�thsome�nputs�gnals.An�nputs�gnalofcompos�tesyncorsynconGmayconfuseth�sprojector,sotheprojectormaynotd�splayaproperp�cture.About Plug-and-Play capabilityPlug-and-Play�sasystemcomposedofaPC,�tsoperat�ngsystemandper�pheralequ�pment(�.e.d�splaydev�ces).Th�sprojector�sVESADDC2Bcompat�ble.Plug-and-Playcanbeusedbyconnect�ngth�sprojectortoapcthat�sVESADDC(d�splaydatachannel)compat�ble.•Takeadvantageofth�sfeaturebyconnect�nganRGBcabletotheCOMPUTERIN1port(DDC2Bcompat�ble).Plug-and-Playmaynotworkproperly�fanyothertypeofconnect�on�sattempted.•Pleaseusethestandarddr�vers�nyourpcasth�sprojector�saPlug-and-Playmon�tor.

Connecting your devices (continued)

10ViewSonic PJ358

Setting up

Using a USB storageInordertov�ew�magesstored�naUSBstorage,suchasaUSBmemoryst�ck,�nsertthedev�ce�ntotheUSBSTORAGEport.Formore�nformat�on,pleaseseethe“USBSTORAGE”.Turntheprojectoroffpr�ortoremov�ngtheUSBstoragefromtheUSBSTORAGEport,topreventsometroubles.

Connecting power supply

1.Puttheconnectorofthepowercord�ntotheAC�nletoftheprojector.

2.F�rmlyplugthepowercord’splug�ntotheoutlet.Inacoupleofsecondsafter

thepowersupplyconnect�on,thePOWER�nd�catorw�lll�ghtup�nsteadyorange.

PleaserememberthatwhentheAUTOONfunct�onact�vated,theconnect�onofthepowersupplymaketheprojectorturnon.

WARNING►Pleaseuseextracaut�onwhenconnect�ngthepowercord,asincorrect or faulty connections may result in fire and/or electrical shock.•Onlyusethepowercordthatcamew�ththeprojector.If�t�sdamaged,contactyourdealertonewlygetcorrectone.•Onlyplugthepowercord�ntoanoutletratedforusew�ththepowercord'sspecified voltage range. The power outlet should be close to the projector and eas�lyaccess�ble.Removethepowercordforcompleteseparat�on.•Nevermod�fythepowercord.

AC INAC�nlet

totheoutlet

Connectorofthepowercord

POWER�nd�cator

Using the security slotTh�sproducthasthesecur�tyslotfortheKens�ngtonlock.Fordeta�ls,seethemanualofthesecur�tytool.

WARNING►Do not use the security slot to preventtheprojectorfromfall�ngdown,s�nce�t�snotdes�gnedfor�t.

NOTE•Thesecur�tyslot�snotcomprehens�vetheftprevent�onmeasures.It�s�ntendedtobeusedassupplementaltheftprevent�onmeasure.

Secur�tyslot

K


DC 5V 0.5A

AUDIO OUT


K


DC 5V 0.5A

AUDIO OUT


LAN

POWER

11ViewSonic PJ358

Remote control

Putting batteriesPleasesetthebatter�estotheremotecontrolbeforeus�ng�t.Iftheremotecontrolstartstomalfunct�on,trytoreplacethebatter�es.Ifyouw�llnotusetheremotecontrolforlongper�od,removethebatter�esfromtheremotecontrolandstorethem�nasafeplace.

1.Hold�ngthehookpartofthebatterycover,remove�t.

2.Al�gnand�nsertthetwoAAbatter�esaccord�ngtothe�rplusandm�nusterm�nals

as�nd�cated�ntheremotecontrol.

3.Replacethebatterycover�nthed�rect�onofthearrowandsnap�tback�ntoplace.

Remotecontrol

WARNING►Alwayshandlethebatter�esw�thcareandusethemonlyasd�rected.Improperusemayresult�nbatteryexplos�on,crack�ngorleakage,which could result in fire, injury and/or pollution of the surrounding environment.• Be sure to use only the batteries specified. Do not use batteries of different typesatthesamet�me.Donotm�xanewbatteryw�thusedone.•Makesuretheplusandm�nusterm�nalsarecorrectlyal�gnedwhenload�ngabattery.•Keepabatteryawayfromch�ldrenandpets.•Donotrecharge,shortc�rcu�t,solderord�sassembleabattery.•Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.•If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the flower adheres your body or clothes, rinse well with water immediately.•Obeythelocallawsond�spos�ngthebattery.

About the remote control signalThe remote control works w�th the projector ’sremotesensor.Th�sprojectorhasaremotesensoronthefront.Thesensorsenses thes�gnalw�th�n the follow�ngrangewhenthesensor�sact�ve:60degrees(30degreestothe leftandr�ghtof thesensor)w�th�n3metersabout.

NOTE•The remote control signal reflected in the screen or the like may be available. If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.•Theremotecontroluses�nfraredl�ghttosends�gnalstotheprojector(Class1LED),sobesuretousetheremotecontrol�nanareafreefromobstaclesthatcouldblocktheremotecontrol’ss�gnaltotheprojector.•Theremotecontrolmaynotworkcorrectly�fstrongl�ght(suchasd�rectsunl�ght)orl�ghtfrom an extremely close range (such as from an inverter fluorescent lamp) shines on the remotesensoroftheprojector.Adjustthepos�t�onofprojectoravo�d�ngthosel�ghts.

30º30º Approx.

3m

12ViewSonic PJ358

Changing the frequency of remote control signalTheaccessoryremotecontrolhasthetwocho�cesons�gnalfrequencyMode1andMode2.Iftheremotecontroldoesnotfunct�onproperly,attempttochangethes�gnalfrequency.InordertosettheMode,pleasekeeppress�ngthecomb�nat�onoftwobuttonsl�stedbelows�multaneouslyforabout3seconds.(1)SettoMode1:MUTEandRESETbuttons(2)SettoMode2:MAGNIFYOFFandESCbuttonsPleaserememberthattheREMOTEFREQ.�ntheSERVICE�temoftheOPTIONmenuoftheprojectortobecontrolledshouldbesettothesamemodeastheremotecontrol.

Remote control

Using as a simple PC mouse & keyboardTheenclosedremotecontrolworksasas�mplemouseandkeyboardofthePC,whentheprojector'sUSBport(Btype)connectsw�ththePC'smouseportv�aamousecable.

(1) HOME key:PresstheHOMEbutton.(2) END key:PresstheENDbutton.(3) PAGE UP key:PressthePAGEUPbutton.(4) PAGE DOWN key:PressthePAGEDOWNbutton.(5) Mouse left button:PresstheENTERbutton.(6) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.(7) ESC key:PresstheESCbutton.(8) Mouse right button:PresstheRESETbutton.

NOTE•Whenthes�mplemouse&keyboardfunct�onofth�sproductdoesnotworkcorrectly,pleasecheckthefollow�ng.-Whenthemousecableconnectsth�sprojectorw�thaPChav�ngabu�lt-�npo�nt�ngdev�ce(e.g.trackball)l�keanotebookPC,openBIOSsetupmenu,thenselecttheexternalmouseandd�sablethebu�lt-�npo�nt�ngdev�ce,becausethebu�lt-�npo�nt�ngdev�cemayhavepr�or�tytoth�sfunct�on.-W�ndows95OSR2.1orh�gher�srequ�redforth�sfunct�on.Andalsoth�sfunct�onmaynot work depending on the PC’s configurations and mouse drivers.-Youcannotdoth�ngsl�kepresstwobuttonsatonce(for�nstance,press�ngtwobuttonsatthesamet�metomovethemousepo�nterd�agonally).-Th�sfunct�on�sact�vatedonlywhentheprojector�swork�ngproperly.Th�sfunct�onis not available while the lamp is warming up (the POWER indicator flashes green), andwh�leadjust�ngthevolumeandd�splay,correct�ngforkeystone,zoom�ng�nonthescreen,us�ngtheBLANKfunct�on,ord�splay�ngthemenuscreen.

CAUTION►Improper use of the simple mouse &keyboardfunct�oncoulddamageyourequ�pment.Wh�leus�ngth�sfunct�on,pleaseconnectth�sproductonlytoaPC.BesuretocheckyourPC’smanualsbeforeconnect�ngth�sproducttothePC.

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

(2)(1)

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

(3)(1)

(2)

(5)

(7)

(4)

(6)

(8)

USBport

K


DC 5V 0.5A

AUDIO OUT


K


DC 5V 0.5A

AUDIO OUT


LAN

13ViewSonic PJ358

Turning on the power1.MakesurethatthePOWER�nd�catorturns�n

steadyorangeandthelenscover�sremoved.

2.PresstheSTANDBY/ONbuttonontheprojectorortheremotecontrol.

Theproject�onlampw�lll�ghtupandthePOWER�nd�catorw�llbeg�nbl�nk�ng�ngreen.Whenthepower�scompletelyon,the�nd�catorw�llstopbl�nk�ngandl�ght�nsteadygreen.

Tod�splaythep�cture,selectan�nputs�gnalaccord�ngtothesect�on“Select�ngan�nputs�gnal”.

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

Power on/off

WARNING►A strong light is emitted when the projector’s power is on. Do notlook�ntothelensoftheprojectororlook�ns�deoftheprojectorthroughanyoftheprojector’sopen�ngs.►Do not touch around the lamp cover and the exhaust vents during use or just afteruse,s�nce�t�stoohot.►Remove the power cord for complete separation.

NOTE•Pleasepowerontheprojectorpr�ortotheconnecteddev�ces.Powerofftheprojector,afterallofconnecteddev�cesarepoweredoff.•Th�sprojectorhasthefunct�onthatcanmaketheprojectorautomat�callyturnon/off.PleaserefertotheAUTOONandAUTOOFF�temsoftheOPTIONmenu.•Usetheshutdownsw�tchonlywhentheprojector�snotturnedoffbynormalprocedure.

Poweron/off

STANDBY/ONbuttonPOWER�nd�cator

Lenscover

Turning off the power1.PresstheSTANDBY/ONbuttonontheprojectorortheremotecontrol.Themessage

“Poweroff?”w�llappearonthescreenforabout5seconds.

2.PresstheSTANDBY/ONbuttonaga�nwh�lethemessageappears.Theprojectorlampw�llgooff,andthePOWER�nd�catorw�llbeg�nbl�nk�ng�norange.

ThenthePOWER�nd�catorw�llstopbl�nk�ngandl�ght�nsteadyorangewhenthelampcool�ng�scomplete.

3.Attachthelenscover,afterthePOWER�nd�catorturns�nsteadyorange.Donotturntheprojectoronforabout10m�nutesafterturn�ng�toff.Turn�ngthe

projectoronaga�ntoosooncouldshortenthel�fet�meofsomeconsumablepartsoftheprojector.

MENU

LAMP

TEMP

POWER


HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

14ViewSonic PJ358

Selecting an input signal1.PresstheINPUT/ENTERbuttonontheprojector.

Eacht�meyoupressthebutton,theprojectorsw�tches�ts�nputportasbelow.COMPUTERIN1COMPUTERIN2VIDEO

S-VIDEO

USBSTORAGE

Operating

Operat�ng

Adjusting the volume1.PresstheVOLUMEbuttonontheremotecontrol.

Ad�alogw�llappearonthescreentoa�dyou�nadjust�ngthevolume.

2.Use the ▲/▼ cursor buttons to adjust the volume.Toclosethed�alogandcompletetheoperat�on,pressthe

VOLUMEbuttonaga�n.Even�fyoudonotdoanyth�ng,thed�alogw�llautomat�callyd�sappearafterafewseconds.

● When �sselectedfortheAUDIO�temoftheSETUPmenu,thevolumeadjustment�sd�sable.

Temporarily muting the sound1.PresstheMUTEbuttonontheremotecontrol.

Ad�alogw�llappearonthescreen�nd�cat�ngthatyouhavemutedthesound.Torestorethesound,presstheMUTEorVOLUMEbutton.Even�fyoudonotdoanyth�ng,thed�alogw�llautomat�callyd�sappearafterafewseconds.

● When �sselectedfortheAUDIO�temoftheSETUPmenu,thevolumeadjustment�sd�sable.

1.PresstheCOMPUTER/STORAGEbuttonontheremotecontrol.

Eacht�meyoupressthebutton,theprojectorsw�tches�ts�nputportasbelow.COMPUTERIN1COMPUTERIN2USBSTORAGE

● If the COMPUTER/STORAGE button is pushed to switch from as�gnalfromtheVIDEOorS-VIDEOport,whenTURNON�sselectedfortheAUTOSEARCH�tem�ntheOPTIONmenu,theprojector will check the COMPUTER IN1 port first. If no input is detectedattheport,theprojectorw�llcheckotherport�naboveorder.

● Selecting the USB STORAGE port displays the THUMBNAIL menu. For more �nformat�on,pleaseseethe“USBSTORAGE”.

(cont�nuedonnextpage)

INPUT/ENTER

MENU

LAMP

TEMP

POWER


HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

VOLUME

▲/▼

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

MUTE

COMPUTER/STORAGE

15ViewSonic PJ358

Operating

Searching an input signal1.PresstheSEARCHbuttonontheremotecontrol.

Theprojectorw�llstarttocheck�ts�nputports�nordertofind any input signals.Whenan�nput�sfound,theprojectorw�llstopsearch�ngandd�splaythe�mage.Ifnos�gnal�sfound,theprojectorw�llreturntothestateselectedbeforetheoperat�on.COMPUTERIN1COMPUTERIN2VIDEO

S-VIDEO

USBSTORAGE

● Selecting the USB STORAGE port displays the THUMBNAIL menu. For more �nformat�on,pleaseseethe“USBSTORAGE”.

Selecting an input signal (continued)

1.PresstheVIDEObuttonontheremotecontrol.Eacht�meyoupressthebutton,theprojectorsw�tches�ts

�nputportasbelow.S-VIDEO VIDEO

● If the VIDEO button is pushed to switch from a signal from the COMPUTERIN1,COMPUTERIN2orUSBSTORAGEport,whenTURNON�sselectedfortheAUTOSEARCH�tem�ntheOPTION menu, the projector will check the S-VIDEO port first. If no�nput�sdetectedattheport,theprojectorw�llchecktheVIDEOport.

Selecting an aspect ratio

1.PresstheASPECTbuttonontheremotecontrol.Eacht�meyoupressthebutton,theprojectorsw�tchesthe

modeforaspectrat�o�nturn.For a PC signal or a signal from the USB STORAGE

NORMAL4:316:9SMALL

For a video signal, s-video signal or component video signal4:316:914:9SMALL

For no signal 4:3 (fixed)

● The ASPECT button does not work when no proper signal is inputted.● The NORMAL mode keeps the original aspect ratio setting.● Performing the automatic adjustment initializes the aspect ratio setting.

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

VIDEO

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

SEARCH

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

ASPECT

16ViewSonic PJ358

Adjusting the zoom and focus1.Usethezoomr�ngtoadjustthescreens�ze.

2.Usethefocusr�ngtofocusthep�cture.

Operating

Focusr�ng Zoomr�ng

Adjusting the projector's elevatorWhentheplacetoputtheprojector�ssl�ghtlyuneventotheleftorr�ght,usetheelevatorfeettoplacetheprojectorhor�zontally.Us�ngthefeetcanalsot�lttheprojector�nordertoprojectatasu�tableangletothescreen,elevat�ngthefronts�deoftheprojectorw�th�n12degrees.Th�sprojectorhas2elevatorfeetand2elevatorknobs.Anelevatorfoot�sadjustablewh�lepull�nguptheelevatorknobonthesames�deas�t.

1.Hold�ngtheprojector,pulltheelevatorknobsuptoloosetheelevatorfeet.

2.Pos�t�onthefronts�deoftheprojectortothedes�redhe�ght.

3.Releasetheelevatorknobs�nordertolocktheelevatorfeet.

4.Aftermak�ngsurethattheelevatorfeetarelocked,puttheprojectorgently.

5.Ifnecessary,theelevatorfeetcanbemanuallytw�stedtomakemoreprec�seadjustments.Holdtheprojectorwhentw�st�ngthefeet.

CAUTION►Do not handle the elevator knobs without holding the projector, s�ncetheprojectormaydropdown.►Do not tilt the projector other than it elevating its front within 12 degrees using theadjusterfeet.At�ltoftheprojectorexceed�ngtherestr�ct�oncouldcausemalfunct�onorshorten�ngthel�fet�meofconsumables,ortheprojector�tself.

Tolooseanelevatorfoot,pulluptheelevatorknobonthesames�deas�t. To finely adjust, twist the foot.

17ViewSonic PJ358

Adjusting the position1.PressthePOSITIONbuttonontheremotecontrol.

The“POSITION”�nd�cat�onw�llappearonthescreen.

2.Use the ▲/▼/◄/► cursor buttons to adjust the picture pos�t�on.

Whenyouwanttoresettheoperat�on,presstheRESETbuttonontheremotecontroldur�ngtheoperat�on.Tocompleteth�soperat�on,pressthePOSITIONbuttonaga�n.Even�fyoudonotdoanyth�ng,thed�alogw�llautomat�callyd�sappearafterafewseconds.

● The POSITION button does not work for a signal from the USB STORAGE port.● When this function is performed on a video signal, s-video signal or component

v�deos�gnal,some�magesuchasanextra-l�nemayappearatouts�deofthep�cture.

● When this function is performed on a video signal, s-video signal, or component v�deos�gnal,therangeofth�sadjustmentdependsontheOVERSCAN�ntheIMAGEmenusett�ng.It�snotposs�bletoadjustwhentheOVERSCAN�ssetto10.

Operating

Using the automatic adjustment feature1.PresstheAUTObuttonontheremotecontrol.

Press�ngth�sbuttonperformsthefollow�ng.For a PC signal

Thevert�calpos�t�on,thehor�zontalpos�t�on,thehor�zontalphaseandthehor�zontals�zew�llbeautomat�callyadjusted.Andtheaspectrat�ow�llbeautomat�callysettodefault.Makesurethattheappl�cat�onw�ndow�ssetto�tsmax�mums�zepr�ortoattempt�ngtouseth�sfeature.Adarkp�cturemayst�llbe�ncorrectlyadjusted.Useabr�ghtp�cturewhenadjust�ng.

For a signal from the USB STORAGETheaspectrat�ow�llbeautomat�callysettothedefault.

For a video signal, s-video signal or component video signalThev�deoformatbestsu�tedfortherespect�ve�nputs�gnalw�llbeselectedautomat�cally.Th�sfunct�on�sava�lableonlywhentheAUTO�sselectedfortheVIDEOFORMAT�tem�ntheINPUTmenu.Thevert�calpos�t�on,hor�zontalpos�t�onandaspectrat�ow�llbeautomat�callysettothedefault.Foracomponentv�deos�gnal,alsothehor�zontalphasew�llbeautomat�callysettothedefault.

● The automatic adjustment operation requires about 10 seconds. Also please notethat�tmaynotfunct�oncorrectlyw�thsome�nput.Whenth�sfunct�on�sperformedforav�deos�gnal,acerta�nextrasuchasal�nemayappearouts�deap�cture.

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

AUTO

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

POSITION

18ViewSonic PJ358

Operating

Using the magnify feature1.PresstheONbuttonofMAGNIFYontheremotecontrol.

The“MAGNIFY”�nd�cat�onw�llappearonthescreen(althoughthe�nd�cat�onw�lld�sappear�nseveralsecondsw�thnooperat�on),andtheprojectorw�llgo�ntotheMAGNIFYmode.

2.Use the ▲/▼ cursor buttons to adjust the zoom level. Tomovethezoomarea,pressthePOSITIONbutton�nthe

MAGNIFY mode, then use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area, press the POSITION button again.Toex�tfromtheMAGNIFYmodeandrestorethescreentonormal,presstheOFFbuttonofMAGNIFYontheremotecontrol.

● The projector automatically exits from the MAGNIFY mode when the input s�gnal�schanged,orwhenthed�splaycond�t�on�schanged.

● Although in the MAGNIFY mode, the keystone distortion condition may vary, it w�llberestoredwhentheprojectorex�tsfromtheMAGNIFYmode.

NOTE•The zoom level can be finely adjusted. Closely watch the screen to find the level you want.

Correcting the keystone distortions1.PresstheKEYSTONEbuttonontheremotecontrol.Ad�alog

w�llappearonthescreentoa�dyou�ncorrect�ngthed�stort�on.

2.Use the ▲/▼ cursor buttons to select the AUTO or MANUAL operation, and press the ► button to perform the following.

(1)TheAUTOexecutesautomat�cvert�calkeystonecorrect�on.(2)TheMANUALd�splaysad�alogforkeystonecorrect�on.

Use the ▲/▼ buttons for adjustment.Toclosethed�alogandcompleteth�soperat�on,presstheKEYSTONEbuttonaga�n.Even�fyoudonotdoanyth�ng,thed�alogw�llautomat�callyd�sappearafterafewseconds.

● The adjustable range of this correction will vary among inputs. For some input, th�sfunct�onmaynotworkwell.

● When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUPmenu,�ftheprojectorscreen�s�ncl�nedorangleddownward,th�sfunct�onmaynotworkcorrectly.

● When the zoom adjustment is set to the TELE (telephoto focus), the automatic keystoned�stort�oncorrect�onmaybeexcess�ve.Th�sfunct�onshouldbeusedwhenthezoomadjustment�ssettothefullWIDE(w�de-anglefocus)wheneverposs�ble.

● Whentheprojector�splacedonthelevel(about±0°),theautomat�ckeystoned�stort�oncorrect�onmaynotwork.

● Whentheprojector�s�ncl�nedtonear±30degreeorover,th�sfunct�onmaynotworkwell.● Th�sfunct�onw�llbeunava�lablewhenTrans�t�onDetector�son.

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

KEYSTONE

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

MAGNIFYON/OFF

19ViewSonic PJ358

Operating

Temporarily blanking the screen1.PresstheBLANKbuttonontheremotecontrol.

Theblankscreenw�llbed�splayed�nsteadofthescreenof�nputs�gnal.PleaserefertotheBLANK�tem�ntheSCREENmenu.Toex�tfromtheblankscreenandreturntothe�nputs�gnalscreen,presstheBLANKbuttonaga�n.

● The projector automatically returns to the input signal screen whenoneoftheprojector’sbuttonsortheremotecontrolbuttons(exceptASPECT,POSITIONorFREEZEbutton,alsoexceptMYBUTTON1/2�fAUTOKEYSTONEorMyMemoryorPICTUREMODE�sass�gnedonthesebuttons)�spressed.

NOTE•Thesound�snotconnectedw�ththeblankscreenfunct�on.Ifnecessary, set the volume or mute first.

Freezing the screen1.PresstheFREEZEbuttonontheremotecontrol.

The“FREEZE”�nd�cat�onw�llappearonthescreen,andtheprojectorw�llgo�ntotheFREEZEmode.Toex�ttheFREEZEmodeandrestorethescreentonormal,presstheFREEZEbuttonaga�n.

● The projector automatically exits from the FREEZE mode whenoneoftheprojector’sbuttonsorremotecontrolbuttonsofSTANDBY/ON,SEARCH,COMPUTER/STORAGE,VIDEO,BLANK,AUTO,VOLUME,MUTE,KEYSTONE,MENU,MAGNIFYandMYBUTTON1/2(exceptMyMemoryorPICTUREMODE�sass�gnedto)�spressed.

● If the projector continues projecting a still image for a long time, the LCD panel m�ghtposs�blybeburned�n.Donotleavetheprojector�ntheFREEZEmodefortoolong.

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

FREEZE

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

BLANK

20ViewSonic PJ358

Operating

Using the menu functionTh�sprojectorhasthefollow�ngmenus:PICTURE,IMAGE,INPUT,SETUP,SCREEN,OPTIONandEASYMENU.EASYMENUcons�stsoffunct�onsoftenused,andtheothermenus are classified into each purpose. Each of these menus is operated using the same methods.Thebas�coperat�onsofthesemenusareasfollows.

1.PresstheMENUbuttonontheremote

controlortheprojector.TheAdvancedMENU,orEASYMENUthathaspr�or�tyjustafterpoweredon,w�llappear.Wh�letheprojector�sd�splay�nganymenu,theINPUT/ENTERbuttonontheprojectorworksastheENTERbuttonandtheMENUbuttonontheprojectorworksasthecursorbuttons.

In the EASY MENU2.Ifyouwanttochange�ttotheAdvanced

Menu,selectthe“GotoAdvancedMenu...”

3.Use the ▲/▼ cursor buttons to select an �temtooperate.

4.Use the ◄/► cursor buttons to operate the�tem.

In the Advanced MENU2.Use the ▲/▼ cursor buttons to select a menu.

Ifyouwanttochange�ttotheEASYMENU,selecttheEASYMENU.Then press the ► cursor button, or the ENTER button to select an item. The lowerlayermenuoftheselected�temw�llappear.

3.Use the ▲/▼ cursor buttons to select an item to operate.Thenpressthe►cursorbutton,ortheENTERbuttontoprogress.Theoperat�onmenu

oftheselected�temw�llappear.

4.Use the ▲/▼ cursor buttons to operate the item.Somefunct�onscannotbeperformedwhenacerta�n�nputport�sselected,or

whenacerta�n�nputs�gnal�sd�splayed.Whenyouwanttoresettheoperat�on,presstheRESETbuttonontheremotecontroldur�ngtheoperat�on.Notethatsome�tems(ex.LANGUAGE,HPHASE,VOLUME)cannotbereset.In the Advanced Menu, when you want to return to the previous display, press the ◄ cursorbutton,ortheESCbuttonontheremotecontrol.

5.PresstheMENUbuttonontheremotecontrolaga�ntoclosethemenuandcompleteth�soperat�on.Even�fyoudonotdoanyth�ng,thed�alogw�ll

automat�callyd�sappearafterabout10seconds.

MENU

LAMP

TEMP

POWER


INPUT/ENTERbuttonMENUbutton

HOME

PAGE

UP

PAGE

DOWN

END

VID

EO

SEAR

CH

FREE

ZE

OFF

ONMA

GNIFYAS

PEC

T

AUTO

BLAN

K

MUTEVO

LUME

KEYS

TONE

MY

BUTT

ON

POSI

TIO

N

12

ESC

ENTE

R

MEN

U

RES

ET

COMP

UTER

/ST

ORAG

E

RESETbutton

ENTERbutton MENUbuttonCursorbuttons

HOME PAGE UP

PAGE DOWNEND

VIDEO SEARCH

FREEZE

OFF

ONMAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONEMY BUTTON

POSITION

1 2

ESC

ENTER

MENU

RESET

COMPUTER/STORAGE

ESCbutton

AdvancedMENUEASYMENU

21ViewSonic PJ358

EASY MENU

EASYMENU

Item Description

ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu.

AUTO KEYSTONE

EXECUTEUsing the ► button executes the auto keystone function. SeetheAUTOKEYSTONE EXECUTE item in SETUP menu.

KEYSTONE Using the ◄/► buttons corrects the vertical keystone distortion.SeetheKEYSTONE item in SETUP menu.

PICTURE MODE

Using the ◄/► buttons switches the picture mode. The picture modes are combinations of GAMMA and COLOR TEMP settings. Choose a suitable mode according to the projected source.

NORMAL ó CINEMA ó DYNAMIC

WHITEBOARD ó DAYLIGHT MODE ó BOARD(BLACK)

COLOR TEMP GAMMANORMAL MID DEFAULT #1 DEFAULTCINEMA LOW DEFAULT #2 DEFAULTDYNAMIC HIGH DEFAULT #3 DEFAULTBOARD(BLACK) Hi-BRIGHT-1 DEFAULT #4 DEFAULTDAYLIGHT MODE Hi-BRIGHT-2 DEFAULT #3 DEFAULTWHITEBOARD MID DEFAULT #5 DEFAULT

• When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and COLOR TEMP items in PICTURE menu.•When this function is performed, a certain extra such as a line may appear.

From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table.

(continued on next page)

22ViewSonic PJ358

EASY MENU

Item Description

BRIGHTNESS Using the ◄/► buttons adjusts the brightness.SeetheBRIGHTNESS�tem�nPICTUREmenu.

CONTRAST Using the ◄/► buttons adjusts the contrast.SeetheCONTRAST�tem�nPICTUREmenu.

COLOR Using the ◄/► buttons adjusts the strength of whole color.SeetheCOLOR�tem�nPICTUREmenu.

TINT Using the ◄/► buttons adjusts the tint.SeetheTINT�tem�nPICTUREmenu.

SHARPNESS Using the ◄/► buttons adjusts the sharpness.SeetheSHARPNESS�tem�nPICTUREmenu.

WHISPER Using the ◄/► buttons turns off/on the whisper mode.SeetheWHISPER�tem�nSETUPmenu.

MIRROR Using the ◄/► buttons switches the mode for mirror status.SeetheMIRROR�tem�nSETUPmenu.

RESETPerform�ngth�s�temresetsalloftheEASYMENU�temsexcepttheFILTERTIMEandLANGUAGE.A dialog is displayed for confirmation. Selecting the RESET using the ▲ button performs resetting.

FILTER TIME

Performing this item resets the filter time which counts usage time of the air filter.A dialog is displayed for confirmation. Selecting the RESET using the ▲ button performs resetting. SeetheFILTERTIME�tem�nOPTIONmenu.

LANGUAGE Using the ◄/► buttons changes the display language. SeetheLANGUAGE�tem�nSCREENmenu.

Go toAdvanced Menu...

Select“GotoAdvancedMenu…”onthemenu,andpressthe►orENTERbuttontousethemenuofPICTURE,IMAGE,INPUT,SETUP,SCREENorOPTION.

EASY MENU (continued)

23ViewSonic PJ358

PICTURE Menu

PICTUREMenu

Item Description

BRIGHTNESS Using the ▲/▼ buttons adjusts the brightness.L�ghtóDark

CONTRAST Using the ▲/▼ buttons adjusts the contrast.StrongóWeak

GAMMA

Using the ▲/▼ buttons switches the gamma mode.#1DEFAULTó#1CUSTOMó#2DEFAULTó#2CUSTOMó#3DEFAULT

#5CUSTOMó#5DEFAULTó#4CUSTOMó#4DEFAULTó#3CUSTOMTo adjust CUSTOM

Select�ngamodewhosename�ncludesCUSTOM and then pressing the ► button ortheENTERbuttond�splaysad�alogtoa�dyou�nadjust�ngthemode.Th�sfunct�on�susefulwhenyouwanttochangethebr�ghtnessofpart�culartones.Choose an item using the ◄/► buttons, and adjust the level using the ▲/▼ buttons. Youcand�splayatestpatternforcheck�ngtheeffectofyouradjustmentbypress�ngtheENTERbutton.Eacht�meyoupresstheENTERbutton,thepatternchangesasbelow.NopatternðGrayscaleof9stepsRampGrayscaleof15stepsThee�ghtequal�z�ngbarscorrespondtoe�ghttonelevelsofthetestpatternexceptthedarkest�ntheleftend.Ifyouwanttoadjustthe2ndtonefromleftendonthetestpattern,usetheequal�z�ngadjustmentbar“1”.Thedarkesttoneattheleftendofthetestpatterncannotbecontrolledw�thanyofequal�z�ngadjustmentbar.•Whenth�sfunct�on�sperformed,l�nesorotherd�stort�onmayappear.

FromthePICTUREmenu, �temsshown�n thetablebelowcanbeperformed.Selectan�temus�ngthe ▲/▼cursorbuttons,andpressthe►cursorbuttonorENTERbuttontoexecutethe�tem.Thenperform�taccord�ngtothefollow�ngtable.

1

+0

2

+0

3

+0

4

+0

5

+0

6

+0

7

+0

8

+0GAMMA [CUSTOM-1]

ENTER, :


24ViewSonic PJ358

Item Description

COLOR TEMP

Using the ▲/▼ buttons switches the color temperature mode.

To adjust CUSTOM

Select�ngamodewhosename�ncludesCUSTOM and then pressing the ► button or the ENTERbuttond�splaysad�alogtoa�dyou�nadjust�ngtheOFFSETandGAINoftheselectedmode.OFFSETadjustmentschangethecolor�ntens�tyonthewholetonesofthetestpattern.GAINadjustmentsma�nlyaffectcolor�ntens�tyonthebr�ghtertonesofthetestpattern.Choose an item using the ◄/► buttons, and adjust the level using the ▲/▼ buttons. Youcand�splayatestpatternforcheck�ngtheeffectofyouradjustmentbypress�ngtheENTERbutton.Eacht�meyoupresstheENTERbutton,thepatternchangesasbelow.NopatternðGrayscaleof9stepsRampGrayscaleof15steps•Whenth�sfunct�on�sperformed,l�nesorotherd�stort�onmayappear.

COLOR

Using the ▲/▼ buttons adjusts the strength of whole color.StrongóWeak

•Th�s�temcanbeselectedonlyforav�deos�gnal,s-v�deoorcomponentv�deos�gnal.

TINT

Using the ▲/▼ buttons adjusts the tint.Green�shóRedd�sh

•Th�s�temcanbeselectedonlyforav�deos�gnal,s-v�deoorcomponentv�deos�gnal.

SHARPNESS

Using the ▲/▼ buttons adjusts the sharpness.StrongóWeak

•There may be some noise and/or the screen may flicker for a momentwhenanadjustment�smade.Th�s�snotamalfunct�on.

PICTURE Menu

PICTURE Menu (continued)

+0 +0

R G B

+0

COLOR TEMP [CUSTOM-1]

OFFSET

+0 +0

R G B

+0

GAINENTER, :

HIGH DEFAULT � HIGH CUSTOM � MID DEFAULT � MID CUSTOM

LOW DEFAULT � LOW CUSTOM � Hi-BRIGHT-1 DEFAULT � Hi-BRIGHT-1 CUSTOM

Hi-BRIGHT-2 DEFAULT � Hi-BRIGHT-2 CUSTOM


25ViewSonic PJ358

PICTURE Menu

Item Description

MY MEMORY

Th�sprojectorhas4memor�esforadjustmentdata(forallthe�temsofthePICTUREmenu).Selecting a function using the ▲/▼ buttons and pressing the ► or ENTERbuttonperformseachfunct�on.

LOAD1óLOAD2óLOAD3óLOAD4

SAVE4óSAVE3óSAVE2óSAVE1LOAD1, LOAD2, LOAD3, LOAD4Perform�ngaLOADfunct�onloadsthedatafromthememoryl�nked�nthenumber�ncluded�nthefunct�on’sname,andadjuststhep�ctureautomat�callydepend�ngonthedata.•TheLOADfunct�onswhosel�nkedmemoryhasnodataaresk�pped.•Rememberthatthecurrentadjustedcond�t�onw�llbelostbyload�ngdata.Ifyouwanttokeepthecurrentadjustment,pleasesave�tbeforeperform�ngaLOADfunct�on.• There may be some noise and the screen may flicker for a momentwhenload�ngdata.Th�s�snotmalfunct�on.•TheLOADfunct�onscanbealsoperformedbytheMYMEMORYbuttonwh�chcanbesetbytheMYBUTTON�tem�nOPTIONmenu.SAVE1, SAVE2, SAVE3, SAVE4Perform�ngaSAVEfunct�onsavesthecurrentadjustmentdata�ntothememoryl�nked�nthenumber�ncluded�nthefunct�on’sname.•Rememberthatthecurrentdatabe�ngstoredofamemoryw�llbelostbysav�nganewdata�ntothememory.

PICTURE Menu (continued)

26ViewSonic PJ358

IMAGE Menu

IMAGEMenu

Item Description

ASPECT

Using the ▲/▼ buttons switches the mode for aspect ratio. For a PC signal or a signal from the USB STORAGE

NORMALó4:3ó16:9óSMALLFor a Video signal, s-video signal or component video signal

4:3ó16:9ó14:9óSMALLFor no signal

4:3 (fixed)•Th�s�temcanbeselectedonlyforapropers�gnal.•TheNORMALmodekeepstheor�g�nalaspectrat�osett�ng.•Perform�ngtheautomat�cadjustment�n�t�al�zestheaspectrat�osett�ng.

OVER SCAN

Using the ▲/▼ buttons adjusts the over-scan ratio.Large(Itreducesp�cture)ó Small (It magnifies picture)

•Th�s�temcanbeselectedonlyforav�deo,s-v�deoandcomponentv�deos�gnal.•Whenth�sadjustment�stoolarge,certa�ndegradat�onmayappearattheframeareaofthep�cture.Insuchacase,pleaseadjustsmall.

V POSITION

Using the ▲/▼ buttons adjusts the vertical position.UpóDown

•Th�s�temcannotbeselectedforas�gnalfromtheUSBSTORAGEport.•Over-adjust�ngthevert�calpos�t�onmaycauseno�setoappearonthescreen.Ifth�soccurspleaseresetthevert�calpos�t�ontothedefaultsett�ng.Press�ngtheRESETbuttonwhentheVPOSITION�sselectedw�llresettheVPOSITIONtothedefaultsett�ng.•Whenth�sfunct�on�sperformedonav�deos�gnal,s-v�deos�gnal,orcomponentv�deos�gnalof525�(480�)or625�(576�),therangeofth�sadjustmentdependsontheOVERSCANsett�ng.It�snotposs�bletoadjustwhentheOVERSCAN�ssetto10.

H POSITION

Using the ▲/▼ buttons adjusts the horizontal position.LeftóR�ght

•Th�s�temcannotbeselectedforas�gnalfromtheUSBSTORAGEport.•Over-adjust�ngthehor�zontalpos�t�onmaycauseno�setoappearonthescreen.Ifth�soccurspleaseresetthehor�zontalpos�t�ontothedefaultsett�ng.Press�ngtheRESETbuttonwhentheHPOSITION�sselectedw�llresettheHPOSITIONtothedefaultsett�ng.•Whenth�sfunct�on�sperformedonav�deos�gnal,s-v�deos�gnal,orcomponentv�deos�gnal,therangeofth�sadjustmentdependsontheOVERSCANsett�ng.It�snotposs�bletoadjustwhentheOVERSCAN�ssetto10.

FromtheIMAGEmenu,�temsshown�nthetablebelowcanbeperformed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Thenperform�taccord�ngtothefollow�ngtable.


27ViewSonic PJ358

IMAGE Menu

Item Description

H PHASE

Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.R�ghtóLeft

•Th�s�temcanbeselectedonlyforacomputers�gnalorcomponentv�deos�gnal.

H SIZE

Using the ▲/▼ buttons adjusts the horizontal size.LargeóSmall

•Th�s�temcanbeselectedonlyforacomputers�gnal.•Whenth�sadjustment�sexcess�ve,thep�cturemaynotbed�splayedcorrectly.Insuchacase,pleaseresettheadjustmentbypress�ngtheRESETbuttondur�ngth�soperat�on.

AUTO ADJUST EXECUTE

Select�ngth�s�temperformstheautomat�cadjustmentfeature.For a PC signal Thevert�calpos�t�on,thehor�zontalpos�t�on,thehor�zontalphaseandthehor�zontals�zew�llbeautomat�callyadjusted.Andtheaspectrat�ow�llbeautomat�callysettothedefault.Makesurethattheappl�cat�onw�ndow�ssetto�tsmax�mums�zepr�ortoattempt�ngtouseth�sfeature.Adarkp�cturemayst�llbe�ncorrectlyadjusted.Useabr�ghtp�cturewhenadjust�ng.For a signal from the USB STORAGETheaspectrat�ow�llbeautomat�callysettothedefault.For a video signal, s-video signal or component video signalThev�deoformatbestsu�tedfortherespect�ve�nputs�gnalw�llbeselectedautomat�cally.Th�sfunct�on�sava�lableonlywhentheAUTOmode�sselectedtotheVIDEOFORMAT�tem�nINPUTmenu.Thevert�calpos�t�on,hor�zontalpos�t�onandaspectrat�ow�llbeautomat�callysettothethedefault.Foracomponentv�deos�gnal,alsothehor�zontalphasew�llbeautomat�callysettothedefault.•Theautomat�cadjustmentoperat�onrequ�resabout10seconds.Alsopleasenotethat�tmaynotfunct�oncorrectlyw�thsome�nput.

IMAGE Menu (continued)

28ViewSonic PJ358

INPUT Menu

INPUTMenu

Item Description

PROGRESSIVE

Using the ▲/▼ buttons switches the progress mode.TVóFILMóTURNOFF

•Th�sfunct�on�sperformedonlyforan�nterlaceds�gnalofav�deo,s-v�deoorcomponentv�deoof525�(480�)or625�(576�)s�gnal.•WhenTVorFILM�sselected,thescreen�magew�llbesharp.FILMadaptstothe2-3Pull-Downconvers�onsystem.Butthesemaycauseacerta�ndefect(forexample,jaggedl�ne)ofthep�ctureforaqu�ckmov�ngobject.Insuchacase,pleaseselectTURNOFF,eventhoughthescreen�magemaylosethesharpness.

VIDEO NR

Using the ▲/▼ buttons switches the noise reduction mode.HIGHóMIDóLOW

•Th�sfunct�onperformsonlyforav�deo,s-v�deoorcomponentv�deoof525�(480�)or625�(576�)s�gnal.•Whenth�sfunct�on�sexcess�ve,�tmaycauseacerta�ndegradat�onofthep�cture.

COLOR SPACE

Using the ▲/▼ buttons switches the mode for color space. AUTOóRGBóSMPTE240óREC709óREC601

•Th�s�temcanbeselectedonlyforacomputers�gnal,componentv�deos�gnaloras�gnalfromtheUSBSTORAGEport.•TheAUTOmodeautomat�callyselectstheopt�mummode.•TheAUTOoperat�onmaynotworkwellatsomes�gnals.Insuchacase,�tm�ghtbegoodtoselectasu�tablemodeexceptAUTO.

FromtheINPUTmenu,�temsshown�nthetablebelowcanbeperformed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Thenperform�taccord�ngtothefollow�ngtable.


29ViewSonic PJ358

Item Description

VIDEO FORMAT

Setthev�deoformatforthes-v�deoportandv�deoport.(1) Use the ◄/► buttons to select the input port.(2) Using the ▲/▼ buttons switches the mode forv�deoformat.

AUTOóNTSCóPALóSECAMN-PALóM-PALóNTSC4.43

•Th�s�tem�sperformedonlyforav�deos�gnalfromtheVIDEOportortheS-VIDEOport.•TheAUTOmodeautomat�callyselectstheopt�mummode.•TheAUTOoperat�onmaynotworkwellforsomes�gnals.Ifthep�cturebecomesunstable(e.g.an�rregularp�cture,lackofcolor),pleaseselectthemodeaccord�ngtothe�nputs�gnal.

FRAME LOCK

Using the ▲/▼ buttons turns the frame lock function on/off. TURNONóTURNOFF

•Th�s�temcanbeperformedonlyonacomputers�gnalw�thavert�calfrequencyof50to60Hz.•WhentheTURNON�sselected,amov�ngp�cturesared�splayedmoresmoothly.•Th�sfunct�onmaycauseacerta�ndegradat�onofthep�cture.Insuchacase,pleaseselecttheTURNOFF.

COMPUTER IN

Setthecomputer�nputs�gnaltypefortheportsofCOMPUTER.(1) Use the ◄/► buttons to select a COMPUTER port to be set.

COMPUTERIN1óCOMPUTERIN2(2) Use the ▲/▼ buttons to select the computer input signal type.

AUTOóSYNCONGOFFSynconGreens�gnalcanbesupported,�fAUTO�sselected.•WhentheAUTO�sselected,thep�cturemaybed�stortedw�thcerta�n�nputs�gnals.Insuchacase,removethes�gnalconnectorf�rstandselectSYNCONGOFFonthemenu,andthenreconnectthes�gnal.•Components�gnalcanbesupportedthroughCOMPUTERIN1port,�fAUTO�sselectedfortheCOMPUTERIN1port.

INPUT Menu

INPUT Menu (continued)


30ViewSonic PJ358

INPUT Menu

Item Description

RESOLUTION

Theresolut�onfortheCOMPUTERIN1andCOMPUTERIN2�nputs�gnalscanbesetonth�sprojector.(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.TheRESOLUTIONmenuw�llbed�splayed.

(2)IntheRESOLUTIONmenu,selecttheresolution you wish to display using the ▲/▼ buttons.Select�ngAUTOw�llsetaresolut�onappropr�atetothe�nputs�gnal.

(3) Pressing the ► or ENTER button when select�ngaSTANDARDresolut�onw�llautomat�callyadjustthehor�zontalandvert�calpos�t�ons,clockphaseandhor�zontals�zeandautomat�callyselectanaspectrat�o.TheINFORMATIONd�alogw�llbed�splayed.

(4)Tosetacustomresolut�onusethe▲/▼ buttons to select the CUSTOM and theCUSTOMRESOLUTIONboxw�llbed�splayed.Setthehor�zontal(HORZ)andvert�cal(VERT)resolut�onsus�ngthe▲/▼/◄/► buttons.Althoughnotallresolut�onsareguaranteed.

(5)Tosavethesett�ngplacethecursorontheright-most digit and press the ► button.Thehor�zontalandvert�calpos�t�ons,clockphaseandhor�zontals�zew�llbeautomat�callyadjustedandanaspectrat�ow�llbeautomat�callyselected.AftertheINFORMATIONd�aloghasd�splayedforabout10secondsthescreenw�llreturntotheRESOLUTIONmenud�splay�ngthechangedresolut�on.

(6)Torevertbacktotheprev�ousresolut�onw�thoutsav�ngchangesplacethecursoronthe left-most digit and press the ◄ button.Thescreenw�llthenreturntotheRESOLUTIONmenud�splay�ngtheprev�ousresolut�on.•Forsomep�ctures,th�sfunct�onmaynotworkwell.

INPUT Menu (continued)

COMPUTER11280x768@60

COMPUTER1992x744@60

31ViewSonic PJ358

SETUP Menu

SETUPMenu

Item Description

AUTO KEYSTONE

EXECUTE

Select�ngth�s�temperformstheautomat�ckeystoned�stort�oncorrect�on.Projectorautomat�callycorrectsvert�calkeystoned�stort�onduetothe(forward/backward)setupangleby�tself.Th�sfunct�onw�llbeexecutedonlyoncewhenselected�nthemenu.Whentheslantoftheprojector�schanged,executeth�sfunct�onaga�n.•Theadjustablerangeforcorrect�onw�llvaryamong�nputs.Forsome�nput,th�sfunct�onmaynotworkwell.•WhenV:INVERTorH&V:INVERT�sselectedtotheMIRROR�tem�ntheSETUPmenu,�ftheprojectorscreen�s�ncl�nedorangleddownward,th�sfunct�onmaynotworkcorrectly.•Whenthezoomadjustment�ssettotheTELE(telephotofocus),th�sfunct�onmaybeexcess�ve.Th�sfunct�onshouldbeusedwhenthezoomadjustment�ssettothefullWIDE(w�de-anglefocus)wheneverposs�ble.•Whentheprojector�splacedonthelevel(about±0°),th�sfunct�onmaynotwork.•Whentheprojector�s�ncl�nedtonear±30degreeorover,th�sfunct�onmaynotworkwell.•Th�sfunct�onw�llbeunava�lablewhentheTrans�t�onDetector�son.

KEYSTONE

Using the ▲/▼ buttons corrects the vertical keystone distortion.Shr�nkthetopofthe�mageóShr�nkthebottomofthe�mage

•Theadjustablerangeofth�sfunct�onw�llvaryw�ththetypeof�nputs�gnal.Forsome�nput,th�sfunct�onmaynotworkwell.•Th�sfunct�onw�llbeunava�lablewhentheTrans�t�onDetector�son.

FromtheSETUPmenu,�temsshown�nthetablebelowcanbeperformed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button on the ENTER button to execute the �tem.Thenperform�taccord�ngtothefollow�ngtable.


32ViewSonic PJ358

SETUP Menu

SETUP Menu (continued)

Item Description

WHISPER

Using the ▲/▼ buttons turns off/on the whisper mode.NORMALóWHISPER

•WhentheWHISPER�sselected,acoust�cno�seandscreenbr�ghtnessarereduced.

MIRROR

Using the ▲/▼ buttons switches the mode for mirror status.

NORMALóH:INVERTóV:INVERTóH&V:INVERT

IftheTrans�t�onDetector�sTURNONandMIRRORstatus�schanged,Trans�t�onDetectorAlarmw�llbed�splayedwhenprojector�srestartedafterthepowersw�tch�sturnedoff.

VOLUMEUsing the ▲/▼ buttons adjusts the volume.

H�ghóLow

AUDIO

Allocatesanaud�oportforUSBSTORAGEport.(1) Press the ▼ button to begin to select.(2) Use the ◄/► buttons to select an Aud�oportfortheUSBSTORAGEport.

AUDIOINó óUSBSTORAGE•Th�ssett�ng�seffect�veonlywhenas�gnalfromtheUSBSTORAGEport�sselected.

33ViewSonic PJ358

SCREEN Menu

SCREENMenu

Item Description

LANGUAGE

Using the ▲/▼ buttons switches the OSD (On Screen Display) language.

SUOMIóPOLSKIóTÜRKÇE

ENGLISHóFRANÇAISóDEUTSCHóESPAÑOLóITALIANO

NORSKóNEDERLANDSóPORTUGUÊSó日本語

óóóSVENSKAó

MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.Toqu�ttheoperat�on,presstheMENUbuttonontheremotecontrolorkeepnooperat�onforabout10seconds.

BLANK

Using the ▲/▼ buttons switches the mode for the blank screen.Theblankscreen�sascreenforthetemporar�lyblank�ngfeature.It�sd�splayedbypress�ngtheBLANKbutton.

MyScreenóORIGINALóBLUEóWHITEóBLACK

FeatureMyScreen Screencanbereg�steredbytheMyScreen�tem.ORIGINAL Screenpresetasthestandardscreen.BLUE,WHITE,BLACK Pla�nscreens�neachcolor.

•Toavo�drema�n�ngasanafter�mage,theMyScreenorORIGINALscreenw�llchangetothepla�nblackscreenafterseveralm�nutes.

FromtheSCREENmenu,�temsshown�nthetablebelowcanbeperformed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Thenperform�taccord�ngtothefollow�ngtable.


34ViewSonic PJ358

SCREEN Menu

Item Description

START UP

Using the ▲/▼ buttons switches the mode for the start-up screen.Thestart-upscreen�sascreend�splayedwhennos�gnaloranunsu�tables�gnal�sdetected.

MyScreenóORIGINALóTURNOFF

FeatureMyScreen Screencanbereg�steredbytheMyScreen�tem.ORIGINAL Screenpresetasthestandardscreen.TURNOFF Pla�nblackscreen.

•Toavo�drema�n�ngasanafter�mage,theMyScreenorORIGINALscreenw�llchangetotheBLANKscreenafterseveralm�nutes.IfalsotheBLANKscreen�stheMyScreenorORIGINAL,thepla�nblackscreen�s�nsteadused.•WhentheTURNON�sselectedtotheMyScreenPASSWARDofSECURITY�tem�nOPTIONmenu,theSTARTUP�sf�xedtoMyScreen.

SCREEN Menu (continued)


35ViewSonic PJ358

SCREEN Menu

Item Description

MyScreen

Th�s�temallowsyoutocapturean�mageforuseasaMyScreen�magewh�chcanbeusedastheBLANKscreenandSTARTUPscreen.D�splaythe�mageyouwanttocapturebeforeexecut�ngthefollow�ngprocedure.1.Select�ngth�s�temd�splaysad�alog

t�tled“MyScreen”.Itw�llaskyou�fyoustartcaptur�ngan�magefromthecurrentscreen.Pleasewa�tforthetarget�magetobed�splayed,andpresstheENTERbuttonwhenthe�mage�sd�splayed.The�magew�llfreezeandtheframeforcaptur�ngw�llappear.Tostopperform�ng,presstheRESETorESCbutton.

2. Using the ▲/▼/◄/► buttons adjusts theframepos�t�on.Pleasemovetheframetothepos�t�onofthe�magewh�chyouwanttouse.Theframemaynotbeabletobemovedforsome�nputs�gnals.Tostartreg�strat�on,presstheENTERbutton.Torestorethescreenandreturntotheprev�ousd�alog,presstheRESETorESCbutton.Reg�strat�ontakesseveralm�nutes.Whenthereg�strat�on�scompleted,thereg�steredscreenandthefollow�ngmessage�sd�splayedforseveralseconds:“MyScreenregistrationisfinished.”

Ifthereg�strat�onfa�led,thefollow�ngmessage�sd�splayed:“Acapturingerrorhasoccurred.Pleasetryagain.”

•Th�sfunct�oncannotbeselectedwhentheTURNON�sselectedtotheMyScreenLock�tem.•Th�sfunct�oncannotbeselectedwhentheTURNON�sselectedtotheMyScreenPASSWARDofSECURITY�tem�nOPTIONmenu.

MyScreen Lock

Using the ▲/▼ buttons turns on/off the MyScreen lock function.TURNONóTURNOFF

WhentheTURNON�sselected,theMyScreen�tem�slocked.Useth�sfunct�onforprotect�ngthecurrentMyScreen.•Th�sfunct�oncannotbeselectedwhentheTURNON�sselectedtotheMyScreenPASSWARDofSECURITY�tem�nOPTIONmenu.



36ViewSonic PJ358

SCREEN Menu

Item Description

MESSAGE

Using the ▲/▼ buttons turns on/off the message function.TURNONóTURNOFF

WhentheTURNON�sselected,thefollow�ngmessagefunct�onworks.“AUTOINPROGRESS”wh�leautomat�callyadjust�ng“NOINPUTISDETECTED”“SYNCISOUTOFRANGE”“Search�ng….”wh�lesearch�ngforthe�nput“Detect�ng….”wh�lean�nputs�gnal�sdetectedThe�nd�cat�onofthe�nputs�gnald�splayedbychang�ngThe�nd�cat�onoftheaspectrat�od�splayedbychang�ngThe�nd�cat�onofthePICTUREMODEd�splayedbychang�ngThe�nd�cat�onoftheMYMEMORYd�splayedbychang�ngThe�nd�cat�onof“FREEZE”and“II”wh�lefreez�ngthescreenbypress�ngtheFREEZEbutton.

•WhentheTURNOFF�sselected,pleaseremember�fthep�cture�sfreez�ng.Donotm�stakefreez�ngforamalfunct�on.

SOURCE NAME

Each�nputportforth�sprojectorcanhaveanameappl�edto�t.(1)Usethe▲/▼buttonsontheSCREENmenutoselectSOURCENAMEandpressthe►button.TheSOURCENAMEmenuw�llbed�splayed.

(2) Use the ▲/▼ buttons on the SOURCE NAMEmenutoselecttheporttobenamedand press the ► button. Right side of the menu is blank until a name is specified.TheSOURCENAMEd�alogw�llbed�splayed.

(3)Thecurrentnamew�llbed�splayedonthefirst line. Use the ▲/▼/◄/►buttonsandtheENTERorINPUTbuttontoselectandentercharacters.TheRESETbuttoncanbeusedtoerase1characteratat�me.Thenamecanbeamax�mumof16characters.

(4)Tochangeanalready�nsertedcharacter,pressthe▲buttonwh�lethecursor�sonthe[A-N]rowtomovethecursortothenamed�splayedonthe first line and use the ◄/►buttonstoselectcharactertobechanged.Onceacharacter�nthename�sselectedusethe▼buttontomovethecursorbackdowntothecharacterentryareatoselectandentercharactersasdescr�bedabove.

(5)Select andpresstheENTERorINPUT buttons when finished entering text.Toreverttotheprev�ousnamew�thoutsaving changes press the ESC or ◄ button andtheINPUTbuttons�multaneously.


37ViewSonic PJ358

OPTION Menu

OPTIONMenu

Item Description

AUTO SEARCH

Using the ▲/▼ buttons turns on/off the automatic signal search function.TURNONóTURNOFF

WhentheTURNON�sselected,detect�ngnos�gnalautomat�callycyclesthrough�nputports�nthefollow�ngorder.Thesearch�sstartedfromthecurrentport.Thenwhenan�nput�sfound,theprojectorw�llstopsearch�ngandd�splaythe�mage.

COMUPUTERIN1ðCOMPUTERIN2

VIDEOS-VIDEOUSBSTORAGE

AUTO KEYSTONE

Using the ▲/▼ buttons turns on/off the automatic keystone function.TURNONóTURNOFF

TURNON:Automat�ckeystoned�stort�oncorrect�onw�llbeexecutedwheneverchang�ngtheslantoftheprojector.TURNOFF:Th�sfunct�on�sd�sabled.PleaseexecutetheAUTOKEYSTONE EXECUTE�ntheSETUPMenuforautomat�ckeystoned�stort�oncorrect�on.•Whentheprojector�ssuspendedfromthece�l�ngth�sfeaturew�llnotfunct�onproperlysoselecttheTURNOFF.•Th�sfunct�onw�llbeunava�lablewhentheTrans�t�onDetector�son.

AUTO ON

Using the ▲/▼ buttons turns on/off the AUTO ON function.TURNONóTURNOFF

WhensettotheTURNON,thelamp�nprojectorw�llbeautomat�callyturnedonw�thouttheusualprocedure,onlywhentheprojector�ssuppl�edw�ththepowerafterthepowerwascutwh�lethelampwason.•Th�sfunct�ondoesnotworkaslongasthepowerhasbeensuppl�edtotheprojectorwh�lethelamp�soff.•Afterturn�ngthelamponbytheAUTOONfunct�on,�fne�ther�nputnoroperat�on�sdetectedforabout30m�nutes,theprojector�sturnedoff,eventhoughtheAUTOOFFfunct�on�sd�sabled.

FromtheOPTIONmenu,�temsshown�nthetablebelowcanbeperformed.Select an item using the ▲/▼ cursor buttons, and press the ► cursorbuttonorENTERbuttontoexecutethe�tem,exceptforthe�temsLAMPTIMEandFILTERTIME.Thenperform�taccord�ngtothefollow�ngtable.


38ViewSonic PJ358

Item Description

AUTO OFF

Using the ▲/▼ buttons adjusts the time to count down to automat�callyturntheprojectoroff.

Long(max.99m�nutes)óShort(m�n.0m�nute=DISABLE)AUTOOFFENABLE

1

AUTOOFFDISABLE

0

Whenthet�me�ssetto0,theprojector�snotturnedoffautomat�cally.Whenthet�me�ssetto1to99,andwhenthepassedt�mew�thno-s�gnaloranunsu�tables�gnalreachesatthesett�me,theprojectorlampw�llbeturnedoff.Ifoneoftheprojector'sbuttonsortheremotecontrolbuttons�spressedoroneofthecommands(exceptgetcommands)�stransm�ttedtothecontrolportdur�ngthecorrespond�ngt�me,projectorw�llnotbeturnedoff.Pleaserefertothesect�on“Turn�ngoffthepower”.

LAMP TIME

Thelampt�me�sthet�mecountedafterthelastresett�ng.It�sshown�ntheOPTIONmenuastheusaget�meofthelamp.Pressing the RESET button or the ► button displays a dialog.To reset the lamp time, select the RESET using the ▲ button.

RESETCANCEL•Pleaseresetthelampt�meonlywhenyouhavereplacedthelamp,forasu�table�nd�cat�onaboutthelamp.•Forthelampreplacement,seethesect�on"Lamp".

FILTER TIME

The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter.Pressing the RESET button or the ► button displays a dialog. To reset the filter time, select the RESET using the ▲ button.

RESETCANCEL•Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter.• For the air filter cleaning, see the section "Air filter".

OPTION Menu

OPTION Menu (continued)


39ViewSonic PJ358

Item Description

MY BUTTON

Th�s�tem�stoass�gnoneofthefollow�ngfunct�ontoMYBUTTON1and2ontheremotecontrol.Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions tothechosenbutton.•COMPUTER1:SetsporttoCOMPUTERIN1.•COMPUTER2:SetsporttoCOMPUTERIN2.•USBSTORAGE:SetsporttoUSBSTORAGE.•S-VIDEO:SetsporttoS-VIDEO.•VIDEO:SetsporttoVIDEO.•INFORMATION:D�splaysad�alogofINPUTINFORMATION.•AUTOKEYSTONE EXECUTE:Performsautomat�ckeystoned�stort�oncorrect�on.•MYMEMORY:

Loadsoneofadjustmentdatastored.

If you want to keep the current adjustment, please press the ◄ buttontoqu�t.Otherw�sethecurrentadjustedcond�t�onw�llbelostbyload�ngadata.

•PICTUREMODE:ChangesthePICTUREMODE.•FILTERRESET: Displays the filter time reset confirmation dialogue.•VOLUME+:Setthevolumeup.•VOLUME-:Setthevolumedown.

SERVICE

Select�ngth�s�temd�splaystheSERVICEmenu.Select an item using the ▲/▼ buttons, and press the ► button or theENTERbuttontoexecutethe�tem.

FANSPEEDóAUTOADJUSTóGHOSTóFILTERMESSAGEóKEYLOCK

FACTORYRESETóINFORMATIONóREMOTEFREQ.

FAN SPEEDUsing the ▲/▼ buttons switches the rotation speed ofthecool�ngfans.TheHIGH�sthemodeforuseath�ghlandsetc.Notethattheprojector�sno�s�erwhentheHIGH�sselected.

HIGHóNORMAL

OPTION Menu (continued)OPTION Menu


Whenthecurrentadjustment�snotsavedtomemoryad�alog�sd�splayed.

Whennodata�ssaved�nmemory,ad�alog�sd�splayed.

40ViewSonic PJ358

Item Description

SERVICE(cont�nued)

AUTO ADJUSTUsing the ▲/▼ buttons enables/disables the automat�cadjustment.WhenDISABLE�sselected,theautomat�cadjustmentfeature�sd�sabled,althoughroughadjustment�sautomat�callyperformeddepend�ngonthebas�csett�ng.

FINEóFASTóDISABLE

FINE:F�nertun�ng�nclud�ngH.SIZEadjustment.FAST:Fastertun�ng,sett�ngH.SIZEtoprearrangeddataforthe

�nputs�gnal•Depend�ngoncond�t�ons,suchas�nput�mage,s�gnalcabletotheprojector,env�ronmentaroundtheprojector,etc.,theautomat�cadjustmentmaynotworkcorrectly.Insuchacase,pleasechooseDISABLEtod�sabletheautomat�cadjustment,andmakeadjustmentmanually.GHOST1. Select a color element of ghost using the ◄/►

buttons.2.Adjust the selected element using the ▲/▼ buttons to

d�sappearghost.

FILTER MESSAGEUse the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air filter.

50hó100hó200hó300hóTURNOFFAfterselect�ng“50h”,“100h”,“200h”,or“300h”,themessage“REMINDER***HRSPASSEDAFTERTHELASTFILTERCHECK”w�llappearafterthet�merreachesthe�ntervalt�mesetbythemenu.When the “TURN OFF” is chosen, the air filter clean�ngmessagew�llnotappear.• Please check and clean the air filter periodically, even if there is no message. If the air filter becomes to be blocked by dust or others, the�nternaltemperaturew�llr�se,wh�chcouldcausemalfunct�on,orreducethel�fet�meoftheprojector.•It�srecommendedtochoose“100h”�ngeneral.Pleasebecarefulw�ththeoperat�ngenv�ronmentoftheprojectorandthecond�t�onofthe air filter, especially when the “200h”, “300h” or “TURN OFF” is chosen.



41ViewSonic PJ358

Item Description

SERVICE(cont�nued)

KEY LOCKUsing the ▲/▼ buttons turns on/off the key lock feature. When TURNON �sselected, thebuttonson theprojectorexcept theSTANDBY/ONbuttonarelocked.

TURNONóTURNOFF•Pleaseusetoavo�dam�sch�efandtouch�ngacc�dentally.Th�sfunct�ondoesnothaveanyeffectontheremotecontrol.REMOTE FREQ.Use the ▲/▼ button to change the Projector's remote sensor sett�ng.

1:NORMALó2:HIGHItemsw�thacheckmarkareon.Thefactorydefaultsett�ng�sforboth1:NORMALand2:HIGHtobeon.Iftheremotecontroldoesnotfunct�oncorrectlysetth�stoe�theronly1oronly2.Ne�thercanbeturnedoffatthesamet�me.

INFORMATIONSelect�ngth�s�temd�splaysad�alogt�tled“INPUTINFORMATION”.Itshowsthe�nformat�onaboutthecurrent�nput.

INPUT-INFORMATIONCOMPUTER11024x768@60

FRAMELOCKON

INPUT-INFORMATIONS-VIDEO

PALAUTO

INPUT-INFORMATIONCOMPUTER1

576�@50

•The“FRAMELOCK”messageonthed�alogmeanstheframelockfunct�on�swork�ng.•Th�s�temcan'tbeselectedfornos�gnalandsyncout.

FACTORY RESETSelecting RESET using the button ▲ performs this function. By th�sfunct�on,allthe�tems�nallofmenusw�llcollect�velyreturntothe�n�t�alsett�ng.Notethatthe�temsLAMPTIME,FILTERTIME,LANGUAGEandSECURITYarenotreset.

RESETCANCEL



42ViewSonic PJ358

Item Description

SECURITY

Th�sprojector�sequ�ppedw�thsecur�tyfunct�ons.Userreg�strat�on�srequ�redbeforeus�ngthesecur�tyfunct�ons.Pleasecontactyourlocaldealer.1. Using Security Features1.1 Inputting the PASSWORD1.1-1 Use the ▲/▼ buttons on the OPTION

menu to select SECURITY and press the ► button.TheENTERPASSWORDboxw�llbed�splayed.

ThefactorydefaultPASSWORD�s5606.Th�sPASSWORDcanbechanged(1.2Chang�ngthePASSWORD).•It�sstronglyrecommendedthefactorydefaultPASSWORDtobechangedassoonasposs�ble.1.1-2 Use the ▲/▼/◄/► buttons to enter the

reg�steredPASSWORD.Movethecursortother�ghts�deoftheENTERPASSWORDBOX and press the ► button to display the SECURITYmenu.Ifan�ncorrectPASSWORD�s�nputtheENTERPASSWORDBOXw�llbed�splayedaga�n.If�ncorrectPASSWORD�s�nput3t�mestheprojectorw�llturnoff.Afterwardstheprojectorw�llturnoffeveryt�mean�ncorrectPASSWORD�s�nput.

1.2 Changing the PASSWORD1.2-1 Use the ▲/▼ buttons on the SECURITY menu

toselectSECURITYPASSWORDCHANGEand press the ► button to display the ENTER NEWPASSWORDBOX.

1.2-2 Use the ▲/▼/◄/► buttons to enter the new PASSWORD.

1.2-3Movethecursortother�ghts�deoftheENTERNEWPASSWORDBOXandpressthe ► button to display the NEW PASSWORD AGAINBOX,enterthesamePASSWORDaga�n.

1.2-4Movethecursortother�ghts�deoftheNEWPASSWORD AGAIN BOX and press the ► buttonandtheNOTENEWPASSWORDBOXw�llbed�splayedforabout20seconds,pleasemakenoteofthePASSWORDdur�ngth�st�me.Press�ngtheENTERbuttonw�llclosetheNOTENEWPASSWORDBOX.

•PleasedonotforgetyourPASSWORD.



43ViewSonic PJ358

Item Description

SECURITY(cont�nued)

1.3 If you have forgotten your PASSWORD1.3-1Followtheprocedure�n1.1-1tod�splaythe

ENTERPASSWORDBOX.

1.3-2Wh�letheENTERPASSWORDBOX�sd�splayed,pressandholdtheRESETbuttonforabout3secondsorpressandholdtheINPUT and ► buttons on the projector for about3seconds

The10d�g�tInqu�r�ngCodew�llbed�splayed.•Ifthere�snokey�nputforabout55secondswh�letheInqu�r�ngCode�sd�splayedthemenuw�llclose.Ifnecessaryrepeattheprocessfrom1.3-1.

1.3-3Contactyourdealerw�ththe10d�g�tInqu�r�ngCode.YourPASSWORDwill be sent after your user registration information is confirmed.

2. Using the MyScreen PASSWORD FunctionTheMyScreenPASSWORDfunct�oncanbeusedtoproh�b�taccesstotheMyScreenfunct�onandpreventthecurrentlyreg�steredMyScreen�magefrombe�ngoverwr�tten.2.1 Turning on the MyScreen PASSWORD Function2.1-1 Use the ▲/▼ buttons on the SECURITY

menutoselectMyScreenPASSWORDandpress the ► button to display the MyScreen PASSWORDon/offmenu.

2.2 Setting the PASSWORD2.2-1D�splaytheMyScreenon/offmenuus�ngthe

procedure�n2.1-1.

2.2-2 Use the ▲/▼ buttons on the MyScreen PASSWORDon/offmenutoselectTURNON.

TheENTERPASSWORDBOX(small)w�llbed�splayed.

2.2-3 Use the ▲/▼/◄/► buttons to enter the PASSWORD.Movethecursortother�ghts�deoftheENTERPASSWORD BOX (small) and press the ► buttontod�splaytheCHECKPASSWORDBOX,enterthesamePASSWORDaga�n.



44ViewSonic PJ358

Item Description


2.2-4Movethecursortother�ghts�deoftheCHECKPASSWORDBOXandpressthe► button to display the PASSWORD for about20seconds,pleasemakenoteofthePASSWORDdur�ngth�st�me.

Press�ngtheENTERbuttonw�llreturntoMyScreenPASSWORDon/offmenu.WhenaPASSWORD�ssetforMyScreen:•TheMyScreenreg�strat�onfunct�on(andmenu)w�llbeunava�lable.•TheMyScreenLockfunct�on(andmenu)w�llbeunava�lable.•TheSTARTUPsett�ngw�llbelockedonMyScreen(andthemenuw�llbeunava�lable).Turn�ngtheMyScreenPASSWORDoffw�llallownormaloperat�onofbothfunct�ons.•PleasedonotforgetyourMyScreenPASSWORD.

2.3 Turning the PASSWORD off2.3-1Followtheprocedure�n2.1-1tod�splaytheMyScreenPASSWORD

on/offmenu.

2.3-2SelectTURNOFFtod�splaytheENTERPASSWORDBOX(large).Enterthereg�steredPASSWORDandthescreenw�llreturntotheMyScreenon/offmenu.

Ifan�ncorrectPASSWORD�s�nputthemenuw�llclose.Ifnecessaryrepeattheprocessfrom2.3-1.

2.4 If you have forgotten your PASSWORD2.4-1Followtheprocedure�n2.1-1tod�splaytheMyScreenPASSWORD

on/offmenu.

2.4-2SelectTURNOFFtod�splaytheENTERPASSWORDBOX(large).The10d�g�tInqu�r�ngCodew�llbed�splayed�ns�detheBOX.

2.4-3Contactyourdealerw�ththe10d�g�tInqu�r�ngCode.YourPASSWORDw�llbesentafteryour user registration information is confirmed.

3. Using the PIN LOCK FunctionPINLOCK�safunct�onwh�chpreventstheprojectorfrombe�ngusedunlessareg�steredCode�s�nput.3.1 Registering the PIN Code3.1-1 Use the ▲/▼ buttons on the SECURITY menu

to select PIN LOCK and press the ► button ortheENTERbuttontod�splaythePINLOCKon/offmenu.



45ViewSonic PJ358

Item Description


3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menutoselectTURNONandthePINBOXw�llbed�splayed.

3.1-3 Input a 4 part PIN Code using the ▲, ▼, ◄, ►, COMPUTER/STORAGE and INPUT buttons.

ACONFIRMATIONBOXw�llappear.ReenterthesamePINCode.Th�sw�llcompletethePINCodereg�strat�on.•Ifthere�snokey�nputforabout55secondswh�lethePINBOXortheCONFIRMATIONBOXared�splayedthemenuw�llclose.Ifnecessaryrepeattheprocessfrom3.1-1.Afterwards,anyt�metheprojector�srestartedafterthepowersw�tch�sturnedoffthePINBOXw�llbed�splayed.Enterthereg�steredPINCode.Theprojectorcanbeusedafterenter�ngthereg�steredPINCode.Ifan�ncorrectPINCode�s�nputthePINBOXw�llbed�splayedaga�n.Ifan�ncorrectPINCode�s�nput3t�mestheprojectorw�llturnoff.Afterwardstheprojectorw�llturnoffeveryt�mean�ncorrectPINCode�s�nput.Theprojectorw�llalsoturnoff�fthere�snokey�nputforabout5m�nuteswh�lethePINBOX�sd�splayed.Th�sfunct�onw�llact�vateonlywhentheprojector�sstartedafterthepowersw�tchwasturnedoff.•PleasedonotforgetyourPINCode.

3.2 Turning Off the PIN LOCK Function3.2-1Followtheprocedure�n3.1-1tod�splaythePINLOCKon/offmenu.

Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be d�splayed.

Enterthereg�steredPINCodetoturnthePINLOCKfunct�onoff.Ifan�ncorrectPASSWORD�senteredthemenuw�llclose.

3.3 If you have forgotten your PIN Code3.3-1Wh�lethePINBOX�sd�splayed,pressand

holdtheRESETbuttonforthreesecondsorpress and hold the INPUT and ► buttons for threeseconds.The10d�g�tInqu�r�ngCodew�llbed�splayed.

•Ifthere�snokey�nputforabout5m�nuteswh�letheInqu�r�ngCode�sd�splayedtheprojectorw�llturnoff.

3.3-2Contactyourdealerw�ththe10d�g�tInqu�r�ngCode.YourPASSWORDwill be sent after your user registration information is confirmed.



46ViewSonic PJ358

Item Description


4. Using the Transition Detector FunctionWh�letheTrans�t�onDetectorfunct�on�sON,whenpowersw�tch�sstartedtosupplytotheprojector,�tm�ghtreactasbelow.•Trans�t�onDetectoralarmshownbelowm�ghtappearonscreen,�ftheprojectorhasbeenmovedorre-�nstalled.•Trans�t�onDetectoralarmm�ghtappearonscreen,�ftheMIRRORsett�nghasbeenchanged.•Keystoneadjustmentfeaturehasbeenproh�b�tedaslongastheTrans�t�onDetectorfunct�on�sON.4.1 Turning On the Transition Detector Function4.1-1Use the ▲/▼ buttons on the SECURITY menu to

select Transition Detector and press the ► or the ENTERbuttontod�splaytheTrans�t�onDetectoron/offmenu.SelectTURNONandthecurrentangleandm�rrorsett�ngw�llberecorded.

•Th�sfeaturemaynotfunct�onproperly�ftheprojector�snot�nastablepos�t�onwhenTURNON�sselected.4.1-2Ifth�sfunct�on�ssettoTURNONwhenthe

vert�calangleoftheprojectororm�rrorsett�ngatwh�chtheprojector�sturnedon�sd�fferentthantheprev�ouslyrecordedtheTrans�t�onDetectorAlarmw�llbed�splayedandtheprojectorw�llnotd�splaythe�nputs�gnal.

SettheTrans�t�onDetectoroff�ntheSECURITYmenutod�splaythe�nputs�gnal.IftheTrans�t�onDetectorALARM�sd�splayedforabout5m�nutesthelampw�llturnoff.Th�sfunct�onw�llact�vateonlywhentheprojector�sstartedafterthepowersw�tchwasturnedoff.4.2 Setting the Transition Detector PASSWORD4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition

Detector and press the ► or the ENTER button to display the Trans�t�onDetectoron/offmenu.

4.2-2 Use the ▲/▼ buttons on the Transition Detectoron/offmenutoselectTURNON.TheENTERPASSWORDBOX(small)w�llbed�splayed.

4.2-3Usethe▲/▼/◄/►buttonstoenteraPASSWORD.Movethecursortother�ghts�deoftheENTERPASSWORDBOX(small)andpressthe►buttontod�splaytheCHECKPASSWORDBOX,enterthesamePASSWORDaga�n.

4.2-4Movethecursortother�ghts�deoftheCHECKPASSWORDBOXandpressthe► button to display the PASSWORD for about20seconds,pleasemakenoteofthePASSWORDdur�ngth�st�me.

Press�ngtheENTERbuttonw�llreturntotheTrans�t�onDetectoron/offmenu.•PleasedonotforgetyourTrans�t�onDetectorPASSWORD.



47ViewSonic PJ358

Item Description


4.3 Setting the Transition Detector off4.3-1Followtheprocedure�n4.1-1tod�splaytheTrans�t�onDetectoron/off

menu.

4.3-2SelectTURNOFFtod�splaytheENTERPASSWORDBOX(large).Enterthereg�steredPASSWORDandthescreenw�llreturntotheTrans�t�onDetectoron/offmenu.Ifan�ncorrectPASSWORD�s�nputthemenuw�llclose.Ifnecessaryrepeattheprocessfrom4.3-1.

4.4 If you have forgotten your PASSWORD4.4-1Followtheprocedure�n4.1-1tod�splaytheTrans�t�onDetectoron/off

menu.

4.4-2SelectTURNOFFtod�splaytheENTERPASSWORDBOX(large).The10d�g�tInqu�r�ngCodew�llbed�splayed�ns�detheBOX.

4.4-3Contactyourdealerw�ththe10d�g�tInqu�r�ngCode.YourPASSWORDw�llbesentafteryouruser registration information is confirmed.

USB STORAGE

Pressing the ► button displays the USB STORAGE KEYCONFIG.Menu.Formore�nformat�on,pleaseseethe“1)Buttonoperat�onforst�ll�mage”ofthe“D�splay�ngan�mage�nfullscreen”underthe“USBSTORAGE”.


48ViewSonic PJ358

USBSTORAGEThis projector has “PC Less presentation” feature that can display following files stored�nUSBstorageord�splayasthumbna�lw�thoutconnect�ngPC.

NOTE 1• Compliant file format

File Format Maximum pixel sizeJPEG 8176x8176M-JPEG(Mot�on-JPEG) 640x480MPEG4 352x288

Progressive JPEG file cannot be reproduced.Some JPEG files may not possible to display the image clearly.

•Compl�antAud�oformatAudio Format Containerformat(fileextension)8b�tor16b�tl�nearPCM AVI,MP4μ-law AVI,MP4IMA-ADPCM AVI4b�tG.726ADPCM ASFMPEG1LayerIIAud�o

MPEG1LayerIIIAud�oandAAC(AdvancedAud�oCod�ng)cannotbereproduced.In combinations of file format and audio format described in the above lists, some files can not be reproduced.

•USBSTORAGE-USB1.1compl�antUSBstoragemed�a(MassStorageclass)canbeused.-SomeUSBmemor�esmaynotworkcorrectly.-Secur�tyUSBmemory�snotsupported.-It�sstronglyrecommendedtouseACPowerAdaptorw�thUSBHardD�sc.- It may be happened that movie files or sound files cannot be reproduced properly if

USBstoragedoesnothaveenoughaccessspeed.-Thefollow�ngformatsarerecommendedforUSBstorage

USBmemory FAT12/FAT16/FAT32(NTFSformat�snotsupported.)USBhardd�sk FAT12/FAT16/FAT32(NTFSformat�snotsupported.)

Displaying Thumbnail Menu1) Save image files in a USB storage. Insert the USB storage into USB

STORAGEportontheprojector.2)Change�nputportfortheprojectortoUSBSTORAGEus�ngCOMPUTER/

STORAGEbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectorsothatThumbna�lmenubelow�sappearedonscreen.

3)OnThumbna�lmenu,thefollow�ngfeaturesaresupported.-ProjectorControl: HaveEasy/AdvancedMenuonscreentocontrolthe

projector,orchangethe�nputporttoS-VIDEO.-Thumbna�ld�splay: D�splaymanystored�mages�nUSBstorageatonce.-Sl�deshow: Sw�tch�magesw�thset�ntervals.-D�splay�nfullscreen: D�splayonest�llp�ctureormov�ngp�cture�nfullscreen.(It�s

not�nThumbna�lmenu.)

USB STORAGE

49ViewSonic PJ358

USB STORAGE

Displaying Thumbnail Menu (continued .)The“PC-LESSPresentat�on”canbecontrolledv�acontrolpanelontheprojectorortheremotecontrol.Follow�ngbuttonoperat�onscanbeval�dwh�leThumbna�lmenu�sd�splayed.

Item Description▲/▼/◄/►

on Remote control /Control panel

Movecursor

“ENTER”on Remote control

“INPUT/ENTER”on Control panel

WorksasENTERfunct�on-D�splayselected�mage�nfullscreen,whenthecursor�s

po�ntedoneofthe�mageonThumbna�lD�splay�nThumbna�lmenu.

-SelectThumbna�lMenu�tem,whenthecursor�satthemenu�nThumbna�lmenu.

NOTE 2•Donotconnectanyapparatusother thanUSBstoragedev�cesandother

equ�pmentsforbatterychargethroughUSB.Itcausesmalfunct�on.•InsertonlyonememorycardeventhoughUSBcardreaderhav�ngmult�ple

slotsformemorycard�sused.P�ctures�nmult�plememor�escannotbeseenatthesamet�me.

•TheOSDmessage“NoMed�a” �sd�splayed, �f there �snomemorycardw�thUSBcardreader.

•Dur�ngbl�nk�ngLEDonUSBcardreader,wh�ch �nd�cates theaccessto thereader,ord�splay�ng“Med�aload�ng…”,donotturntheprojector�ntothepoweroff/standbymodenorremove/�nsertUSBcableandmemorycard.

•Follow�ngmessagem�ghtappearwhenprojector�nputport�schangedto[USBSTORAGE].

Thumbnail Menu

Thumbna�lD�splay Menu

Displaying Thumbnail Menu (continued)

50ViewSonic PJ358

USB STORAGE

Displaying Thumbnail Menu (continued)

Message Description

NoMed�a USBstorage �snot �nserted �ntoUSBSTORAGEslotontheprojector.

BrokenMed�a Th�s �sanalarmmessagethatUSBstorage �nserted �ntoUSBSTORAGEslotontheprojector�sbroken.

BadformatTh�s �sanalarmmessagethatUSBstorage �nserted �ntoUSBSTORAGEslotontheprojectorhasanoncompl�antformat.

Med�aload�ng Load�ng f�les �n the USB storage �nserted �nto USBSTORAGEslotontheprojector.Pleasewa�tforawh�le.

ReadyPreparat�onof thumbna�l d�splay for theUSBstorage�nserted �ntoUSBSTORAGEsloton theprojectorhasbeencompleted.Pleasewa�tforawh�lemore.

•Donotuseth�sfunct�onotherthanpr�vatepurposes.Itm�ght�nfr�ngecopyr�ghtlaws.

•Backupallof thedata �nthememorycard, �ncaseanydataare lostduetounexpectedacc�dent.Anyl�ab�l�tyforthelossbym�stakeormalfunct�onshallnotbeassumed.

•DependsonUSBStorageDev�ces,Thumbna�ld�splaym�ghtd�sappearsonceatthebeg�nn�ngofconnect�onandcomesaga�n.

Controlling the projectorWh�leThumbna�lmenu�sonscreen,somebuttonsontheprojectorandremotecontrolareass�gnedsomedes�gnatedfunct�onstosupportthemenuoperat�on.IfnormalEASYorAdvancedMENUonscreen,orINPUTSELECTfunct�on�srequ�red,selectPJCONTROL�temontheThumbna�lmenu.Use ▲, ▼, ◄ and ► buttons to move a cursor to the PJ CONTROL item in Thumbna�lmenu.PushENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectortodec�detheselected�tem.Follow�ng�temscanbecontrolled.

PJ CONTROL itemsItem Description

MENUD�splayEASY/AdvancedMENUoftheprojector.Select[MENU]using ▲, ▼, ◄ and ► buttons, then push ENTER button on the remotecontrolorINPUT/ENTERbuttonontheprojector.

INPUT SELECT

Change�nputportoftheprojector.Select[INPUTSELECT]us�ng▲, ▼, ◄ and ► buttons, then push ENTER button on the remote controlorINPUT/ENTERbuttonontheprojector,sothe�nputportw�llbechangedfromUSBSTORAGEtoS-VIDEO.Then,Thumbna�lmenuw�llbed�sappeared.

51ViewSonic PJ358

USB STORAGE

Displaying Thumbnail imageImage files in USB storage can be seen as thumbnail display. Use ▲, ▼, ◄ and ► buttonstomoveacursortoTHUMBNAIL�tem�nThumbna�lmenu.PushENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectortodec�de�t.

THUMBNAIL itemsItem Description

IMAGE

Select image files to display as thumbnail.1. Select [IMAGE] using ▲, ▼, ◄ and ► buttons, then push

ENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectorsothat[IMAGE]sett�ngcanbeselected.

2. Change [IMAGE] setting using ▲ and ▼ buttons.ALL(D�splayall)óSTILL PICTURE(D�splayst�llp�ctureonly)ôôMOTION PICTURE(D�splaymot�onp�ctureonly)

3.Getoutfromthestatusthat[IMAGE]sett�ng�sselectable,bypush�ngENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.

Page Up

Movetoprev�ousthumbna�ld�splaypage.(Whencurrentthumbna�ldisplay shows image files between 13th and 24th, it shows image files between 1st and 12th after move.)Select[PageUp]us�ng▲,▼,◄and►buttons,thenpushENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.[PageUp]keyonremotealsocanbeused.

Page Down

Movetofollow�ngthumbna�ld�splaypage.(Whencurrentthumbna�ldisplay shows image files between 1st and 12th, it shows image files between 13th and 24th after move.)Select [Page Down] using ▲, ▼, ◄ and ► buttons, then push ENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.[PageDown]buttononremotealsocanbeused.

Thumbnail Menu

Thumbna�lD�splay Menu

Selected�mage

Thumbna�l�mages(upto12�mages)

52ViewSonic PJ358

USB STORAGE

Displaying Thumbnail image (continued)

NOTE 3• Up to 999 files can be displayed•F�lesaresorted�nthefollow�ngorder.1)Symbols,2)Numbers,3)

Characters• File name can be displayed up to 16 characters including file extension.• The characters of following languages can be used for file name. If other

languages are used, the file name is not displayed properly, but the content canbed�splayed.Engl�sh,French,German,Span�sh,Ital�an,Norweg�an,Dutch,Portuguese,Swed�sh,Russ�an,F�nn�sh,Pol�shandTurk�sh.

•Folders�nUSBstoragecanberecogn�zedupto3layers.Thepr�or�tyofthumbnail display for image files is as follows.

•P�cturemaynotbed�splayedcorrectly,depend�ngontheconnect�ngdev�ce�ncasethatanextendedUSBcable�sused.

•Responset�mem�ghtvarydepend�ngoneach�magecontentswhensw�tch�ngpages, loading files and playing each movie.

•Whentherearefollow�ng�consonthumbna�ld�splay,�tm�ghtbenon-compl�antfile. Check the saved file in USB storage.

Icon Description

This is un-displayable file. Check the format of saved file.RefertoNOTE1

This motion picture file does not contain audio clip or cannot be reproducedsound.RefertoNOTE1

F�led�splaypr�or�ty�nfolder：A>B>C>D>E>FFolderG:Cannotbed�splayedbecause�t�s4thlayer.

C

F

E

G

B

A

D

: Currentd�rectory: A:FolderB

:FolderD

:FolderG:FolderC

:FolderF

:FolderE

53ViewSonic PJ358

USB STORAGE

Playing Slide showSLIDESHOWcand�splaysafullscreen�mageandchange�ttothenextone�ndes�red�ntervalt�me.Use ▲, ▼, ◄ and ► buttons to move a cursor to SLIDE SHOW item in Thumbnail menu.pushENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectortodec�de�t.

SLIDE SHOW itemsItem Description

PLAYStarts“SLIDESHOW”.Select [PLAY] using ▲, ▼, ◄ and ► buttons, then push ENTER buttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.

START

Specify and select image file number in thumbnail display as start�ngnumberfor“SLIDESHOW”.1. Select [START] using ▲, ▼, ◄ and ► buttons, then push

ENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector,sothat[START]sett�ngcanbeselected.

2. Change [START] setting (range from 1 to 999) using ▲ and ▼ buttons.

3.Getoutfromthestatusthat[START]sett�ng�sselectable,bypush�ngENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.

STOP

Specify and select image file number in thumbnail display as finishing number for “SLIDE SHOW”.1. Select [STOP] using ▲, ▼, ◄ and ► buttons, then push ENTER

buttonontheremotecontrolorINPUT/ENTERbuttonontheprojector,sothat[STOP]sett�ngcanbeselected.

2. Change [STOP] setting (range from 1 to 999) using ▲ and ▼ buttons.

3.Getoutfromthestatusthat[STOP]sett�ng�sselectable,bypush�ngENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.

INTERVAL

Spec�fyandselectpageforward�ng�ntervalfor“SLIDESHOW”.1. Select [INTERVAL] using ▲, ▼, ◄ and ► buttons, then push

ENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectorsothat[INTERVAL]sett�ngcanbeselected.

2.Change[INTERVAL]sett�ng(rangefrom1to999seconds)us�ng▲ and ▼buttons.

3.Getoutfromthestatusthat[INTERVAL]sett�ng�sselectable,bypush�ngENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.


54ViewSonic PJ358

USB STORAGE

Playing Slide show (continued)

SLIDE SHOW items (continued)Item Description

MODE

SelectSLIDESHOWplay�ngatONETIMEorENDLESS.1. Select [MODE] using ▲, ▼, ◄ and ► buttons, then push

ENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector,sothat[MODE]sett�ngcanbeselected.

2. Change [MODE] setting using ▲ and ▼buttons. ONE TIME ó ENDLESS (Play�ngSl�deShow (Play�ngSl�deShow onlyonet�me) endless)

3.Getoutfromthestatusthat[MODE]sett�ng�sselectable,bypush�ngENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.

SCREEN EFFECT

SelectSCREENEFFECTforsl�dechange�nSLIDESHOW.1. Select [SCREEN EFFECT] using ▲, ▼, ◄ and ► buttons, then

pushENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectorsothat[SCREENEFFECT]sett�ngcanbeselected.

2. Change [SCREEN EFFECT] setting using ▲ and ▼ buttons. OFF ó 1 ó 2 (noeffect) (Sl�cedIN) (M�ncedIN)

3.Getoutfromthestatusthat[SCREENEFFECT]sett�ng�sselectable,bypush�ngENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector.

NOTE 4• If the number specified for [START] is bigger than the number specified for

[STOP],sl�deshow�snotexecuted.• When the file size selected for SLIDE SHOW is big, the actual interval time

maybelongerthanthesett�meat[INTERVAL]menu.•Whenamot�on�mage�sselectedforSLIDESHOW,thenextsl�dew�llbe

d�splayedaftertheplayofthemot�on�mage�sended,regardlessofwhatever�ssetat[INTERVAL]menu.

•When[MODE]�ssetto“ONETIME”,thelastsl�deofthepresentat�onw�llbeholdonscreent�lle�therofENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojector�spushed.

55ViewSonic PJ358

USB STORAGE

Displaying an image in full screenOne selected image file on Thumbnail menu can be displayed in full screen. Use ▲, ▼, ◄ and ► buttons to move a cursor to select an image on Thumbnail menu.Then,pushENTERbuttonontheremotecontrolorINPUT/ENTERbuttonontheprojectortod�splaytheselected�mage�nfullscreen.Wh�le�nfullscreenmode,�foneofthesebuttons�spushedonemoret�me,theprojector�sbacktoThumbna�ld�splay.

1) Button operation for still imageWh�lest�ll�mage�sshown�nfullscreen,thefollow�ngoperat�oncanbemadefromthecontrolpanelontheprojectorortheremotecontrol.There are two type of KEY configurations for ▲/▼/◄/► button available. (USBSTORAGEoftheOPTIONmenu)

Button Key CONFIG. 1 Key CONFIG. 2

UP Turnaroundthe�mage90degreeclockw�se. D�splayprev�ous�mage.

DOWN Turnaroundthe�mage90degreeant�clockw�se. D�splayfollow�ng�mage.

RIGHT D�splayfollow�ng�mage. Turnaroundthe�mage90degreeclockw�se.

LEFT D�splayprev�ous�mage. Turnaroundthe�mage90degreeant�clockw�se.

“ENTER”onRemotecontrol

“INPUT/ENTERonControlpanel

D�splaysthumbna�l. D�splaysthumbna�l.

Fullscreend�splay

56ViewSonic PJ358

USB STORAGE

Displaying an image in full screen (continued)

2) Button operation for motion pictureWh�lemot�onp�cture�sshown�nfullscreen,thefollow�ngoperat�oncanbemadefromthecontrolpanelontheprojectorortheremotecontrol.

Button Operation

UPPauseandplaymot�onp�cture.

PlayóPause

DOWNPlaymot�onp�ctureslowly.(halfspeed)

PlayóPlay slowly (half speed)

RIGHTFast-forwardmot�onp�cture.

PlayðFast-forward (2 times)Fast-forward (8 times)Fast-forward (4 times)

LEFTFast-rew�ndmot�onp�cture.

PlayðFast-rewind (2 times)Fast-rewind (8 times)Fast-rewind (4 times)

UP(pushforawh�le)

Wh�leUPbutton�sbe�ngpushed,thed�splaymode�schanged�nevery2secondsautomat�cally.

� � �

Youcanchooseone�n4d�splaymodesofD�splay�nfullscreenw�ththeprogressbar,D�splay�nfullscreenw�thoutprogressbar,1:1d�splayw�ththeprogressbaror1:1d�splayw�thoutprogressbar.Note:Themot�onp�cture�spausedorrestoredwheneverUPbutton�spushed.

“ENTER”onRemotecontrol

“INPUT/ENTER”onControlpanel

D�splaythumbna�ls.

57ViewSonic PJ358

Ma�ntenanceLampA lamp has finite product life. Using the lamp for long periods of time could cause thep�cturesdarkerorthecolortonepoor.Notethateachlamphasad�fferentl�fet�me,andsomemayburstorburnoutsoonafteryoustartus�ngthem.Preparat�onofanewlampandearlyreplacementarerecommended.Toprepareanewlamp,contactyourdealerandtellthelamptypenumber.

Type number : RLC-027Replacing the lamp

1.Turntheprojectoroff,andunplugthepowercord.Allowtheprojectortocoolforatleast45m�nutes.

2.Prepareanewlamp.Iftheprojector�smountedonace�l�ng,or�fthelamp

hasbroken,alsoaskthedealertoreplacethelamp.

In case of replacement by yourself,

3.Loosenthescrew(markedbyarrow)ofthelampcoverandthensl�dethelampcovertothes�detoremove�t.

4.Loosenthe2screws(markedbyarrow)ofthelamp,andslowlyp�ckupthelampbythehandle.

Itmaymake�teasytotakethelampoutsl�ghtlytowardthecontrolpaneloftheprojector.

5.Insert the new lamp, and retighten firmly the 2screwsofthelampthatareloosened�nthe

prev�ousprocesstolock�t�nplace.T�ghtenthescrewj first, then screw k.

6.Slide the lamp cover back in place and firmly fastenthescrewofthelampcover.

7.Turntheprojectoronandresetthelampt�meus�ngtheLAMPTIME�tem�ntheOPTIONmenu.

(1)PresstheMENUbuttontod�splayamenu.(2)Po�ntatthe“GotoAdvancedMenu…”�nthemenu

using the ▼/▲ button, then press the ► button.(3)Po�ntatthe“OPTION”�ntheleftcolumnofthemenu

using the ▼/▲button, then press the ► button.(4) Point at the “LAMP TIME” using the ▼/▲ button, then press the ► button. A

d�alogw�llappear.(5)Pressthe▲buttontoselect“RESET”onthed�alog.Itperformsresett�ngthelampt�me.

Maintenance

NOTE•Pleaseresetthelampt�meonlywhenyouhavereplacedthelamp,forasu�table�nd�cat�onaboutthelamp.

Thelampcover

Thehandle1

2

CAUTION►Do not touch any inner space of the projector, while the lamp is taken out.

58ViewSonic PJ358

Maintenance

Lamp (continued)

Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSUREWARNING►The projector uses a high-pressure mercury glass lamp. The lamp can

breakw�thaloudbang,orburnout,�fjoltedorscratched,handledwh�lehot,orwornovert�me.Notethateachlamphasad�fferentl�fet�me,andsomemayburstorburnoutsoonafteryoustartus�ngthem.Inadd�t�on,whenthebulbbursts,�t�sposs�bleforshards of glass to fly into the lamp housing, and for gas containing mercury to escape fromtheprojector’sventholes.►About disposal of a lamp:Th�sproductconta�nsamercurylamp;donotput�t�natrash.D�sposeof�t�naccordancew�thenv�ronmentallaws.•Forlamprecycl�ng,gotowww.lamprecycle.org.(�ntheUS).•Forproductd�sposal,contactyourlocalgovernmentagency

orwww.e�ae.org(�ntheUS)orwww.epsc.ca(�nCanada).Formore�nformat�on,callyourdealer.

• If the lampshouldbreak (�tw�llmakea loudbangwhen �tdoes),unplug thepowercord from theoutlet,andmakesure to requestareplacement lamp fromyour localdealer.Note thatshardsofglasscoulddamagetheprojector’s�nternals,orcause�njurydur�nghandl�ng,sopleasedonottrytocleantheprojectororreplacethelampyourself.• If the lampshouldbreak (�tw�llmakea loudbangwhen �tdoes),vent�late the roomwell,andmakesurenot tobreathe thegas thatcomesoutoftheprojectorvents,orget�t�nyoureyesormouth.•Beforereplac�ngthelamp,turntheprojectoroffandunplugthepowercord, thenwa�tat least45m�nutes for the lamp tocoolsuff�c�ently.Handl�ngthelampwh�lehotcancauseburns,aswellasdamag�ngthelamp.•Neverunscrewexcepttheappo�nted(markedbyanarrow)screws.•Donotopen the lampcoverwh�le theprojector �ssuspended fromabove.Th�s �sdangerous,s�nce �f the lamp’sbulbhasbroken, theshardsw�ll falloutwhen thecover �sopened. Inadd�t�on,work�ng �nh�ghplaces �sdangerous,soaskyour localdealer tohave the lampreplacedeven�fthebulb�snotbroken.•Donotuse theprojectorw�th the lampcoverremoved.At the lampreplac�ng,makesure that thescrewsarescrewed �n f�rmly.Loosescrewscouldresult�ndamageor�njury.•Use only the lamp of the specified type.• If the lampbreakssoonafter the f�rst t�me �t �sused, �t �sposs�blethat thereareelectr�calproblemselsewherebes�des the lamp. If th�shappens,contactyourlocaldealeroraserv�cerepresentat�ve.•Handlew�thcare:jolt�ngorscratch�ngcouldcausethelampbulbtoburstdur�nguse.•Us�ngthelampforlongper�odsoft�me,couldcause�tdark,nottol�ghtuportoburst.Whenthep�cturesappeardark,orwhenthecolortone�spoor,pleasereplacethe lampassoonasposs�ble.Donotuseold(used)lamps;th�s�sacauseofbreakage.

D�sconnecttheplugfromthepoweroutlet

59ViewSonic PJ358

Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. Replace the air filter when it is damaged or too soiled. To prepare a new air filter, contact ViewSonic and tell the air filter type number.When you replace the lamp, please replace the air filter. An air filter of specified typew�llcometogetherw�thareplacementlampforth�sprojector.

Cleaning the air filter

1.Turntheprojectoroff,andunplugthepowercord. Allow the projector to sufficiently cool down.

2.Useavacuumcleaneronandaroundthefilter cover.

3.Wh�lesupport�ngtheprojectorw�thonehand,use your other hand to pull the filter cover

forward�nthed�rect�onofthearrow.

4.Use a vacuum cleaner for the filter ventilation of the projector. And clean the air filter that is set

at one side of the filter cover by using a vacuum cleaner over the other side of the filter cover.Please replace the air filter when it is damaged or too soiled. When the air filter is set, take its half moonshapecutparttotheswelledpartofthefilter cover.

5.Put the filter unit back into the projector.

6.Turn the projector on and reset the filter time us�ngtheFILTERTIME�tem�ntheEASYMENU.

(1)PresstheMENUbuttontod�splayamenu.(2) Point at the “FILTER TIME” using the ▼/▲ button, then press the ► button. A

d�alogw�llappear.(3) Press the ▲ button to select “RESET” on the dialog. It performs resetting the

filter time.

Maintenance

Air filter

NOTE • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter.•Theprojectormayd�splaythemessagesuchas“CHECKTHEAIRFLOW”orturnofftheprojector,topreventthe�nternalheatlevelr�s�ng.

The filter cover

The air filter is set in the reverse s�de

Swelledpart

Air filterF�ltercover

WARNING►Before taking care of the air filter, make sure the power cable is not plugged in, then allow the projector to cool sufficiently. ►Use only the air filter of the specified type. Do not use the projector without the air filter or the filter cover. It could result in a fire or malfunction to the projector.►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector.

60ViewSonic PJ358

Maintenance

Inside of the projectorInordertoensurethesafeuseofyourprojector,pleasehave�tcleanedand�nspectedbyyourdealeraboutonceeveryyear.

Caring for the lensIf the lens is flawed, soiled or fogged, it could cause deterioration of display qual�ty.Pleasetakecareofthelens,be�ngcaut�ousofhandl�ng.

1.Turntheprojectoroff,andunplugthepowercord.Allowtheprojectortocoolsufficiently.

2.Aftermak�ngsurethattheprojector�scooladequately,l�ghtlyw�pethelensw�thacommerc�allyava�lablelens-clean�ngw�pe.Donottouchthelens

d�rectlyw�thyourhand.

Caring for the cabinet and remote controlIncorrect care could have adverse influence such as discoloration, peeling paint, etc.

1.Turntheprojectoroff,andunplugthepowercord.Allowtheprojectortocoolsufficiently.

2.Aftermak�ngsurethattheprojector�scooladequately,l�ghtlyw�pew�thgauzeorasoftcloth.

Iftheprojector�sextremelyd�rty,d�psoftcloth�nwateroraneutralcleanerd�luted�nwater,andw�pel�ghtlyafterwr�ng�ngwell.Then,w�pel�ghtlyw�thasoft,drycloth.

Other care

WARNING►Before caring, make sure the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature stateoftheprojectorcouldcauseaburnand/ormalfunct�ontotheprojector.►Never try to care for the inside of the projector personally. Doing is so dangerous.►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and/or malfunction to the projector. •Donotputanyth�ngconta�n�ngwater,cleanersorchem�calsneartheprojector.•Donotuseaerosolsorsprays.

CAUTION►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence suchasd�scolorat�on,peel�ngpa�nt,etc.►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects.

61ViewSonic PJ358

Troubleshoot�ngIfanabnormaloperat�onshouldoccur,stopus�ngtheprojector�mmed�ately.

Troubleshooting

Otherw�se�faproblemoccursw�ththeprojector,thefollow�ngchecksandmeasuresarerecommendedbeforerequest�ngrepa�r.Ifth�sdoesnotresolvetheproblem,pleasecontactyourdealerorserv�cecompany.Theyw�lltellyouwhatwarrantycond�t�on�sappl�ed.

Related messagesWhensomemessageappears,checkandcopew�th�taccord�ngtothefollow�ngtable.Althoughthesemessagesw�llbeautomat�callyd�sappearedaroundseveralm�nutes,�tw�llbereappearedeveryt�methepower�sturnedon.

Message Descr�pt�on

NO INPUT IS DETECTED

There is no input signal. Please confirm the signal input connection, and the status ofthes�gnalsource.

SYNCHRO HORS PORTEE��

fH ��kHz fV ��Hz

The horizontal or vertical frequency of the input signal isnotwithinthespecifiedrange.Please confirm the specs for your projector or the signal sourcespecs.

CHECK THE AIR FLOW

The internal temperature is rising. Pleaseturnthepoweroff,andallowtheprojectortocooldown at least 20 minutes. After having confirmed the follow�ng�tems,pleaseturnthepowerONaga�n.•Isthereblockageofthea�rpassageaperture?•Is the air filter dirty?•Doestheper�pheraltemperatureexceed35°C?Ifthesame�nd�cat�on�sd�splayedaftertheremedy,pleasesetFANSPEEDoftheSERVICE�tem�ntheOPTIONmenutoHIGH.

REMINDER*** HRS PASSED AFTER THE

LAST FILTER CHECK. FILTER MAINTENANCE IS ESSENTIAL TO REMOVE WARNING MESSAGE,

RESET FILTER TIMER.

SEE MANUAL FURTHER INFO.

Anoteofprecautionwhencleaningtheairfilter. Please�mmed�atelyturnthepoweroff,andcleanorchangethe air filter referring to the “Air Filter” section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer.

WARNING►Never use the projector if abnormal operations such as smoke,strangeodor,excess�vesound,damagedcas�ngorelementsorcables,penetrat�onofl�qu�dsorfore�gnmatter,etc.shouldoccur.Insuchcases,�mmed�atelyd�sconnectthepowerplugfromthepoweroutlet.Aftermak�ngsurethatthesmokeorodorhasstopped,contactyourdealerorserv�cecompany.

62ViewSonic PJ358

Troubleshooting

Regarding the indicator lampsWhenoperat�onoftheLAMP,TEMPandPOWER�nd�catorsd�ffersfromusual,checkandcopew�th�taccord�ngtothefollow�ngtable.

POWER indicator

LAMP indicator

TEMP indicator Description

L�ght�ngInOrange

Turnedoff

Turnedoff

The projector is in a standby state.Pleaserefertothesect�on“Poweron/off”.

BlinkingIn Green

Turnedoff

Turnedoff

The projector is warming up.Pleasewa�t.

L�ght�ngInGreen

Turnedoff

Turnedoff

The projector is in an on state.Ord�naryoperat�onsmaybeperformed.

BlinkingIn Orange

Turnedoff

Turnedoff

The projector is cooling down.Pleasewa�t.

BlinkingIn Red

(d�scre-t�onary)

(d�scre-t�onary)

The projector is cooling down. A certain error has been detected.Please wait until the POWER indicator finishes bl�nk�ng,andthenperformthepropermeasureus�ngthe�temdescr�pt�onsbelow.

BlinkingIn Red

orL�ght�ngInRed

L�ght�ngInRed

Turnedoff

The lamp does not light, and there is a possibility that interior portion has become heated.Pleaseturnthepoweroff,andallowtheprojectortocooldownatleast20m�nutes.Aftertheprojectorhassufficiently cooled down, please make confirmation of thefollow�ng�tems,andthenturnthepoweronaga�n.•Isthereblockageofthea�rpassageaperture?• Is the air filter dirty?•Doestheper�pheraltemperatureexceed35°C?Ifthesame�nd�cat�on�sd�splayedaftertheremedy,pleasechangethelampreferr�ngtothesect�on“Lamp”.

BlinkingIn Red

orL�ght�ngInRed

BlinkingIn Red

Turnedoff

Thelampcoverhasnotbeenproperlyfixed.Pleaseturnthepoweroff,andallowtheprojectortocooldownatleast45m�nutes.Aftertheprojectorhassufficiently cooled down, please make confirmation of theattachmentstateofthelampcover.Afterperform�nganyneededma�ntenance,turnthepoweronaga�n.Ifthesame�nd�cat�on�sd�splayedaftertheremedy,pleasecontactyourdealerorserv�cecompany.

BlinkingIn Red

orL�ght�ngInRed

Turnedoff

BlinkingIn Red

The cooling fan is not operating.Pleaseturnthepoweroff,andallowtheprojectortocooldownatleast20m�nutes.Aftertheprojectorhassufficiently cooled down, please make confirmation thatnofore�gnmatterhasbecomecaught�nthefan,etc.,andthenturnthepoweronaga�n.Ifthesame�nd�cat�on�sd�splayedaftertheremedy,pleasecontactyourdealerorserv�cecompany.


63ViewSonic PJ358

Troubleshooting

Regarding the indicator lamps (continued)

POWER indicator

LAMP indicator

TEMP indicator Description

BlinkingIn Red

orL�ght�ngInRed

Turnedoff

L�ght�ngInRed

There is a possibility that the interior portion has become heated.Pleaseturnthepoweroff,andallowtheprojectortocooldownatleast20m�nutes.Aftertheprojectorhassufficiently cooled down, please make confirmation of thefollow�ng�tems,andthenturnthepoweronaga�n.•Isthereblockageofthea�rpassageaperture?• Is the air filter dirty?•Doestheper�pheraltemperatureexceed35°C?Ifthesame�nd�cat�on�sd�splayedaftertheremedy,pleasesetFANSPEEDoftheSERVICE�tem�ntheOPTIONmenutoHIGH.

L�ght�ngInGreen

S�multaneousblinking in Red

Itistimetocleantheairfilter.Please�mmed�atelyturnthepoweroff,andcleanorchange the air filter referring to the section “Air Filter”. After cleaning or changing the air filter, please be sure to reset the filter timer. Aftertheremedy,resetthepowertoON.

L�ght�ngInGreen

Alternat�veblinking in Red

There is a possibility that the interior portion has become overcooled.Pleaseusetheun�tw�th�ntheusagetemperatureparameters(5°Cto35°C).Afterthetreatment,resetthepowertoON.

NOTE•Whenthe�nter�orport�onhasbecomeoverheated,forsafetypurposes,theprojector�sautomat�callyshutdown,andthe�nd�catorlampsmayalsobeturnedoff.Insuchacase,d�sconnectthepowercord,andwa�tatleast 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn thepoweronaga�n.

Shutting the projector downOnlywhentheprojectorcannotbeturnedoffbyusualprocedure,pleasepushtheshutdownsw�tchus�ngap�nors�m�lar,andd�sconnectthepowerplugfromthepoweroutlet.Beforeturn�ng�tonaga�n,wa�tatleast10m�nutestomaketheprojectorcooldownenough.

Resetting all settingsWhen�t�shardtocorrectsomewrongsett�ngs,theFACTORYRESETfunct�onoftheSERVICE�tem�ntheOPTIONmenucanresetallsett�ngs(exceptLANGUAGE,FILTERTIME,LAMPTIME,FILTERMESSAGEandetc.)tothefactorydefault.

K

COMPUTER IN1 COMPUTER IN2

Shutdownsw�tch

64ViewSonic PJ358

Troubleshooting

Phenomena that may be easy to be mistaken for machine defectsAboutthephenomenonconfusedw�thamach�nedefect,checkandcopew�th�taccord�ngtothefollow�ngtable.

Phenomenon Cases not involving a machine defect Referencepage

Powerdoesnotcomeon.

The electrical power cord is not plugged in.Correctlyconnectthepowercord. 10

The main power source has been interrupted during operation such as by a power outage (blackout), etc.Pleased�sconnectthepowerplugfromthepoweroutlet,andallowtheprojectortocooldownatleast10m�nutes,thenturnthepoweronaga�n.

10,13

Either there is no lamp and/or lamp cover, or either ofthesehasnotbeenproperlyfixed.Pleaseturnthepoweroffandd�sconnectthepowerplugfromthepoweroutlet,andallowtheprojectortocooldownatleast45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp andlampcover,andthenturnthepoweronaga�n.

57

Ne�thersoundsnorp�cturesare

outputted.

The signal cables are not correctly connected.Correctlyconnecttheconnect�oncables. 8

Signal source does not correctly work.Correctlysetupthes�gnalsourcedev�cebyreferr�ngtothemanualofthesourcedev�ce.

–

The input changeover settings are mismatched.Selectthe�nputs�gnal,andcorrectthesett�ngs. 14,15

Sounddoesnotcomeout.

The signal cables are not correctly connected.Correctlyconnecttheaud�ocables. 8

The MUTE function is working.Restorethesoundpress�ngtheMUTEorVOLUMEbuttonontheremotecontrol.

14

The volume is adjusted to an extremely low level.Adjustthevolumetoah�gherlevelus�ngthemenufunct�onortheremotecontrol.

14

The AUDIO setting is not correct.CorrectlysettheAUDIO�ntheSETUPmenu. 32

Nop�cturesared�splayed.

The lens cover is attached.Removethelenscover. 13

The signal cables are not correctly connected.Correctlyconnecttheconnect�oncables. 8


65ViewSonic PJ358

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon Cases not involving a machine defect Referencepage

Nop�cturesared�splayed.(cont�nued)

The brightness is adjusted to an extremely low level.AdjustBRIGHTNESStoah�gherlevelus�ngthemenufunct�onortheremotecontrol.

21,23

The computer cannot detect the projector as a plug and play monitor.Makesurethatthecomputercandetectaplugandplaymon�torus�nganotherplugandplaymon�tor.

9

The BLANK screen is displayed.PresstheBLANKbuttonontheremotecontrol. 19

V�deoscreend�splayfreezes.

The FREEZE function is working.PresstheFREEZEbuttontorestorethescreentonormal. 19

Colorshaveafaded-out

appearance,orColortone�s

poor.

Color settings are not correctly adjusted.Performp�ctureadjustmentsbychang�ngtheCOLORTEMP,COLOR,TINTand/orCOLORSPACEsett�ngs,us�ngthemenufunct�ons.

21,24,28

COLOR SPACE setting is not suitable.ChangetheCOLORSPACEsett�ngtoAUTO,RGB,SMPTE240,REC709orREC601.

28

P�cturesappeardark.

The brightness and/or contrast are adjusted to an extremely low level.AdjustBRIGHTNESSand/orCONTRASTsett�ngstoah�gherlevelus�ngthemenufunct�on.

21,23

The WHISPER function is working.SelectNORMALfortheWHISPER�tem�ntheSETUPmenu.

22,32

The lamp is approaching the end of its product lifetime.Replacethelamp.

57

P�cturesappearblurry.

Either the focus and/or horizontal phase settings are not properly adjusted.Adjustthefocusus�ngthefocusr�ng,and/orHPHASEus�ngthemenufunct�on.

16,27

The lens is dirty or misty.Cleanthelensreferr�ngtothesect�on“Car�ngforthelens”. 60

Troubleshooting

NOTE•Althoughbr�ghtspotsordarkspotsmayappearonthescreen,th�s�saun�quecharacter�st�cofl�qu�dcrystald�splays,and�tdoesnotconst�tuteor�mplyamach�nedefect.

66ViewSonic PJ358

Specifications

Specifications

Item SpecificationProduct name Liquid crystal projectorLiquidCrystalPanel

Panel size 1.6 cm (0.63 type)Drive system TFT active matrixPixels 786,432 pixels (1024 horizontal x 768 vertical)

Lens Zoom lens F=1.8 ~ 1.9 f = 16.4~ 19.7 mmLamp 160W UHBSpeaker 1 W x1Power supply AC100-120V/2.8A, AC220-240V/1.4APower consumption 250 WTemperature range 5 ~ 35°C (Operating)

Size274 (W) x 59 (H) x 205 (D) mm * Not including protruding parts. Please refer to the following figure.

Weight (mass) 1.784 kg

Ports

Computer input portCOMPUTER IN1...............D-sub 15 pin mini x1COMPUTER IN2...............D-sub 15 pin mini x1Video input portS-VIDEO.................S-video x1VIDEO....................... video x1

Audio input/output portAUDIO IN.........Stereo mini x1AUDIO OUT.....Stereo mini x1 OthersUSB STORAGE......USB-A x1 USB.........................USB-B x1

Optional partsLamp:RLC-027Air filter:* Please consult your dealer.

[unit: mm]

274

205

59 73

67ViewSonic PJ358

Customer Support

Fortechn�calsupportorproductserv�ce,seethetablebeloworcontactyourreseller.Note:Youw�llneedtheproductser�alnumber.

Country/Region Web SiteT=Telephone

F=FaxE-mail

Un�tedStates www.v�ewson�c.com/support/T=8006886688

F=9094681202serv�ce.us@v�ewson�c.com

Canada www.v�ewson�c.com/support T=8664634775 serv�ce.ca@v�ewson�c.com

Un�tedK�ngdom www.v�ewson�ceurope.com/uk T=02079490307 serv�ce.eu@v�ewson�ceurope.com

Europe,M�ddleEast,Balt�ccoun-tr�es,andNorthAfr�ca

www.v�ewson�ceurope.com Contactyourreseller serv�ce.eu@v�ewson�ceurope.com

Austral�aandNewZealand www.v�ewson�c.com.au/support/

AUS=1800880818

NZ=0800008822serv�[email protected]�ewson�c.com

S�ngapore/Malay-s�a/Tha�land www.v�ewson�c.com.sg/support/ T=6564616044 serv�[email protected]�ewson�c.com

SouthAfr�ca/Othercountr�es www.v�ewson�c.com

T=88622246-3456

F=88622249-1751serv�[email protected]�ewson�c.com

HongKong www.hk.v�ewson�c.com/support/ T=85231022900 serv�[email protected]�ewson�c.com

Macau www.hk.v�ewson�c.com/support/ T=853700303 serv�[email protected]�ewson�c.com

Korea www.v�ewson�c.com T=0802659080 serv�[email protected]�ewson�c.com

68ViewSonic PJ358

Limited WarrantyVIEWSONIC®PROJECTOR

What the warranty covers:V�ewSon�cwarrants�tsproductstobefreefromdefects�nmater�alandworkmansh�p,undernormaluse,dur�ngthewarrantyper�od.Ifaproductprovestobedefect�ve�nmater�alorworkmansh�pdur�ngthewarrantyper�od,V�ewSon�cw�ll,at�tssoleopt�on,repa�rorreplacetheproductw�thal�keproduct.Replacementproductorpartsmay�ncluderemanufacturedorrefurb�shedpartsorcomponents.

How long the warranty is effective:NorthandSouthAmer�ca:3yearsforallpartsexclud�ngthelamp,3yearsforlabor,1yearfor the original lamp from the date of the first consumer purchase.Europe:3yearsforallpartsexclud�ngthelamp,3yearsforlabor,1yearfortheor�g�nallamp from the date of the first consumer purchase.Otherreg�onsorcountr�es: Please check with your local dealer or local ViewSonic office for thewarranty�nformat�on.Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s�nstalledlamponly.Allaccessorylampspurchasedseparatelyarewarrantedfor90days.

Who the warranty protects:This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:1. Any product on which the serial number has been defaced, modified or removed.2. Damage,deter�orat�onormalfunct�onresult�ngfrom:

a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

b. Repa�rorattemptedrepa�rbyanyonenotauthor�zedbyV�ewSon�c.c. Anydamageoftheproductduetosh�pment.d. Removalor�nstallat�onoftheproduct.e. Causes external to the product, such as electric power fluctuations or failure.f. Use of supplies or parts not meeting ViewSonic’s specifications.g. Normalwearandtear.h. Anyothercausewh�chdoesnotrelatetoaproductdefect.

3. Anyproductexh�b�t�ngacond�t�oncommonlyknownas“�magebu�lt-�n”wh�chresultswhenastat�c�mage�sd�splayedontheproductforanextendedper�odoft�me.

4. Removal,�nstallat�on,andset-upserv�cecharges.

How to get service:1. For�nformat�onaboutrece�v�ngserv�ceunderwarranty,contactV�ewSon�cCustomer

Support(PleaserefertoCustomerSupportpage).Youw�llneedtoprov�deyourproduct’sser�alnumber.

69ViewSonic PJ358

2. Toobta�nwarrantedserv�ce,youw�llberequ�redtoprov�de(a)theor�g�naldatedsalessl�p,(b)yourname,(c)youraddress,(d)adescr�pt�onoftheproblem,and(e)theser�alnumberoftheproduct.

3. Takeorsh�ptheproductfre�ghtprepa�d�ntheor�g�nalconta�nertoanauthor�zedV�ewSon�cserv�cecenterorV�ewSon�c.

4. Foradd�t�onal�nformat�onorthenameofthenearestV�ewSon�cserv�cecenter,contactV�ewSon�c.

5. Forappl�cablemodelsw�ththePINcodesecur�tyfeatureonly.Th�sprojectorconta�nsa personal identification number (PIN) that restricts access to authorized users. If you forgettorecordthePINcode�ntheUserGu�dew�thyourSer�alNumber,youw�llhavetosend�ntheun�tforserv�cesothecodecanbereset.However,�fyoureg�steryourproductser�alnumberw�thV�ewSon�c,alongw�thyourPINcode,�tw�llbereta�nedonfile with your registration should you need it in the future.”

Limitation of implied warranties:Therearenowarrant�es,expressor�mpl�ed,wh�chextendbeyondthedescr�pt�oncontained herein including the implied warranty of merchantability and fitness for a part�cularpurpose.

Exclusion of damages:V�ewSon�c’sl�ab�l�ty�sl�m�tedtothecostofrepa�rorreplacementoftheproduct.V�ewSon�cshallnotbel�ablefor:1. Damagetootherpropertycausedbyanydefects�ntheproduct,damagedbased

upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of bus�nessopportun�ty,lossofgoodw�ll,�nterferencew�thbus�nessrelat�onsh�ps,orothercommerc�lloss,even�fadv�sedoftheposs�b�l�tyofsuchdamages.

2. Anyotherdamages,whether�nc�dental,consequent�alorotherw�se.3. Anycla�maga�nstthecustomerbyotherparty.

Effect of state law:This warranty gives you specific legal rights, and you may also have other rights which varyfromstatetostate.Somestatesdonotallowl�m�tat�onson�mpl�edwarrant�esand/ordonotallowtheexclus�onof�nc�dentalorconsequent�aldamages,sotheabovel�m�tat�onsandexclus�onsmaynotapplytoyou.

Sales outside the U.S.A. and Canada: Forwarranty�nformat�onandserv�ceonV�ewSon�cproductssoldouts�deoftheU.S.A.andCanada,contactV�ewSon�coryourlocalV�ewSon�cdealer.Thewarrantyper�odforth�sproduct�nma�nlandCh�na(HongKong,MacaoandTa�wanExcluded)�ssubjecttothetermsandcond�t�onsoftheMa�ntenanceGuaranteeCard.

4.3:ProjectorWarranty PRJ_LW03Rev.1a06-30-06

pj358-1 user guide, english - projectorcentral · shock, do not expose th s apparatus to ra n or mo...

Documents