press fittings for steel pipe list price · pdf file316 stainless steel ring astm a53 steel...
TRANSCRIPT
PRESS FITTINGS FOR STEEL PIPE
LIST PRICE BOOK
MALLEABLE CAST IRON PRESS FITTINGSFOR SCH. 10 – 40 BLACK & GALVANIZED STEEL PIPE
Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.comMKT-23 • 01/11 Prices Effective 01/15/2011
FASTLOCK™ fittings are not currently approved for use with gas or fire protection applications.
FASTLOCK™ fittings provide the quickest and easiest way to connect schedules 10 through 40 black and galvanized ASTM A53 compliant steel pipe.
FASTLOCK™ fittings are available in a complete range of sizes from ½" – 2".
FASTLOCK™ fittings install without the use of threading dies, pipe seal-ants, or pipe wrenches; significantly reducing average installation time, saving time and money. Because they connect without wrenches, FAST-LOCK™ fittings reduce stress on joists and hangers during installation.
FASTLOCK™ fittings feature “Sure Connect®” technology that ensures unpressed connections are detected during pressure testing.
FASTLOCK™ press jaws are compatible with most press tools on the market, including Ridgid®, Rothenberger®, REMS®, and Stanley® VIRAX®.
FASTLOCK™ fittings feature a special-ized, corrosion-resistant, malleable cast iron body with stainless steel fastening rings and EPDM sealing gaskets.
Applications include water, HVAC, and compressed air systems.
ISO Certified, IAPMO Approved, NSF 61-4 Certified
From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com
PRESS FITTINGS FOR STEEL PIPE
Pipes for FASTLOCK™
FASTLOCK™ fittings are for use with ASTM A53 compliant ½" – 2" schedule 10 through schedule 40 black and galvanized steel pipe only.
Press Tools for FASTLOCK™
FASTLOCK™ fittings must be used with FASTLOCK™ approved press jaws only. FASTLOCK™ jaws are compatible with press tools from Ridgid®, Rothenberger®, REMS®, and Stanley® VIRAX®. The press tool must be for sizes up to 2" with a press force of at least 32kN and operating either at 110 volts or on battery power.
Operating ParametersOperating Temperature: 0˚ – 250˚ FMaximum Operating Pressure: 200 PSI
WarrantyFASTLOCK™ fittings carry a 50 year limited warranty against defects in material and workmanship when properly installed and used under normal circumstances.
ApprovalsISO 9001:2000 CertifiedIAPMO Approved: Uniform Plumbing CodeNSF-61-4 Certified
THE QUICKEST & EASIEST WAY TO CONNECT STEEL PIPE
After Press ConnectionPressing Area
EPDM Gasket
316 Stainless Steel Ring
ASTM A53 Steel Pipe
Pressing Area
EPDM Gasket
316 Stainless Steel Ring
ASTM A53 Steel Pipe
Before Press Connection
FASTLOCK™ fittings are made from malleable cast iron. The annealing process used in their manufacturing provides them with a greater malleability well suited for press connections. During manufacturing, all FASTLOCK™ fittings are hot-dipped in 99.99% pure, molten zinc. This process completely coats the fittings’ surface inside and outside, giving them additional strength and providing a resistance to oxide corrosion, making them excellent for use in drinking water systems.
FASTLOCK™ fittings ensure a tightly sealed connection utilizing a pre-assembled sealing gasket and stainless steel gripping ring. The thick EPDM sealing gasket provides a wide contact surface between the fitting and the pipe, ensuring the con-nection is air and water tight after pressing. The AISI 316L stainless steel ring grips the pipe and prevents it from pulling out, even in cases of very high pressure. Tabs on the fitting end retain the sealing gasket and stainless steel gripping ring.
The diagram below illustrates how all of these features provide FASTLOCK™ fittings with a strong and secure press connection.
Stainless Steel Gripping Ring
Tabs EPDM Gasket
Stop
Malleable Cast Iron Body
Zinc Coating
01/11
NOTE: Connections MUST be made on ASTM A53 compliant pipe using FASTLOCK™ approved jaws ONLY. The instructions above are provided as a brief overview of the installation process. Before using any FASTLOCK™ products, read the complete Technical Manual. Complete installation instructions can be found in the Technical Manual or at www.fastlockfittings.com
From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com
PRESS FITTINGS FOR STEEL PIPE
QUICK & EASY INSTALLATION
ORDERING INFORMATION
Verify the outside diameter of the pipe is compliant to ASTM A53 standards. Cut the pipe perpendicular to its axis.
Mark the insertion depth on the pipe. Insert the pipe into the fitting until it makes contact with the stop.
Deburr the end of the pipe to avoid damaging the gasket. Make sure the pipe is free of debris, rust, paint, scale, etc.
Complete the press connection using FASTLOCK™ jaws in accordance with your press tool’s instructions.
Verify the presence, integrity and correct positioning of the gasket and metal ring. If necessary, lubricate the pipe and fitting with approved silicone spray.
Verify the press connection.
1 2 3
4 65
01/11
FASTLOCK™ fittings are available from Cimberio Valve Company, Inc.
Freight Policy: Cimberio Valve standard freight terms apply to all orders placed for delivery to a single destination in the conti-nental United States. Contact your local distributor for specific details. Otherwise, freight items are F.O.B. Malvern, Pennsylvania 19355. To read Cimberio Valve’s complete freight policy, visit us online at www.cimberiovalve.com and click on the “Policies” link at the bottom of the page.
Order Acceptance: Orders are accepted by fax (877-232-9246) or e-mail ([email protected]). Possession of any of our catalogs or list price books by any person is not to be construed as an offer to sell to that person. All prices are subject to change without notice.
Minimum Order: There is NO minimum order at Cimberio Valve.
Payment Terms: All invoice terms are Net 30 from the date of Cimberio Valve invoices. Invoices may now be paid by credit card. Cimberio Valve accepts Visa, MasterCard, and Discover. Before paying by credit card you must fax a completed Credit Card Autho-rization Form to us at 877-232-9246. This form can be downloaded from www.cimberiovalve.com on the “Policies” page (the link appears on the bottom of the page) or you can request the form by phone at 877-228-9246.
FASTLOCK™ Fittings Are Available Through Wholesalers Only
Contractors Earn Points Towards FREE FASTLOCK™ Products with the “Get To The Point” Program!
Visit www.fastlockfittings.com for more information.
From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com
PRESS FITTINGS FOR STEEL PIPE
01/11
Press: Female Press Socket Joint • P.E.: Male Plain End • MIPT: Male Iron Pipe Thread • FIPT: Female Iron Pipe Thread
FASTLOCK™ Tools
Part No. Description Price
VALBFKIT01½" – 1" Kit (Includes: ½" Jaws, ¾" Jaws, 1" Jaws,
Pipe Gauge, Pipe Deburrer, and Carrying Case)$696.38
53463-8641 ½" Jaws Only $172.80
53463-8651 ¾" Jaws Only $209.09
53463-8661 1" Jaws Only $212.54
VALBFKIT021¼" – 2" Kit (Includes: 1¼" Collar, 1½" Collar, 2" Collar, 1¼" – 2" Actuator, Pipe Gauge, Pipe
Deburrer, and Carrying Case)$4,222.21
53463-8680 1¼" – 2" Actuator Only $200.45
53463-8671 1¼" Collar Only $1,251.07
53463-8681 1½" Collar Only $1,258.24
53463-8691 2" Collar Only $1,301.18
53105-0105 Pipe Deburrer Only $59.73
Item No. 90 90˚ Elbow: Press x Press
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 90BLK-04 $6.46 90HDG-04 $7.04 80
¾" 90BLK-06 $8.52 90HDG-06 $9.29 50
1" 90BLK-07 $12.96 90HDG-07 $14.13 30
1¼" 90BLK-08 $22.10 90HDG-08 * $23.62 20
1½" 90BLK-09 $32.16 90HDG-09 * $33.39 15
2" 90BLK-10 $52.56 90HDG-10 * $54.58 8
Item No. 9190˚ Elbow: Press x P.E.
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 91BLK-04 $8.71 91HDG-04 * $9.49 80
¾" 91BLK-06 $11.95 91HDG-06 * $13.03 40
1" 91BLK-07 $17.67 91HDG-07 * $19.26 30
1¼" 91BLK-08 $30.06 91HDG-08 * $32.12 20
1½" 91BLK-09 $41.03 91HDG-09 * $42.60 15
2" 91BLK-10 $60.29 91HDG-10 * $62.60 8
Item No. 9290˚ Elbow: Press x MIPT
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 92BLK-04 $10.88 92HDG-04 * $11.86 80
¾" 92BLK-06 $14.94 92HDG-06 * $16.29 40
1" 92BLK-07 $22.09 92HDG-07 * $24.08 30
1¼" 92BLK-08 $37.58 92HDG-08 * $40.15 20
1½" 92BLK-09 $51.30 92HDG-09 * $53.25 15
2" 92BLK-10 $75.36 92HDG-10 * $78.22 8
Item No. 9390˚ Elbow: Press x FIPT
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 93BLK-04 $8.90 93HDG-04 † $9.70 80
¾" 93BLK-06 $13.87 93HDG-06 † $15.12 50
1" 93BLK-07 $21.87 93HDG-07 † $23.84 30
1¼" 93BLK-08 $36.05 93HDG-08 † $38.52 20
1½" 93BLK-09 $50.82 93HDG-09 † $52.76 15
2" 93BLK-10 $70.04 93HDG-10 † $72.72 8
MALE THREADFEMALE THREAD
PRESS PRESS
PRESS
PRESS
PRESS
MALE PLAIN END
ACTUATOR 1½" COLLAR1¼" COLLAR 2" COLLAR
1½1¼ 2
½" JAWS ¾" JAWS 1" JAWS
½ ¾ 1
PIPE DEBURRER
* Part Nos. marked with an asterisk will be available Fall 2011. Part Nos. marked with a † are currently in production, please call for availability.
From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com
PRESS FITTINGS FOR STEEL PIPE
01/11
Press: Female Press Socket Joint • P.E.: Male Plain End • MIPT: Male Iron Pipe Thread • FIPT: Female Iron Pipe Thread
* Part Nos. marked with an asterisk will be available Fall 2011. Part Nos. marked with a † are currently in production, please call for availability.
Item No. 130Tee: Press Run x Press Branch
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 130BLK-04 $8.37 130HDG-04 $9.12 50
¾" 130BLK-06 $12.27 130HDG-06 $13.37 30
1" 130BLK-07 $16.01 130HDG-07 $17.45 20
1¼" 130BLK-08 $30.79 130HDG-08 $32.91 10
1½" 130BLK-09 $43.25 130HDG-09 $44.90 8
2" 130BLK-10 $58.24 130HDG-10 $60.46 5
PRESSPRESS
PRESS
Item No. 132Slip Tee: Press Run x Press Branch
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 132BLK-04 $11.17 132HDG-04 † $12.18 50
¾" 132BLK-06 $14.13 132HDG-06 † $15.40 30
1" 132BLK-07 $17.70 132HDG-07 † $19.30 20
1¼" 132BLK-08 $30.95 132HDG-08 * $33.73 10
1½" 132BLK-09 $44.10 132HDG-09 * $48.07 8
2" 132BLK-10 $59.42 132HDG-10 * $64.77 5
PRESS
PRESS
PRESS
SLIP
Item No. 133 Tee - Reducing: Press Run x Reduced Press Branch This item is currently in production and may be supplied as a 130 Tee and 247 Adapter if fitting is unavailable.
Size (Run x Branch)
Black Galvanized Carton Qty.Part No. Price Part No. Price
1½" x ½" 133BLK-0904 * $38.90 133HDG-0904 * $42.78 8
1½" x ¾" 133BLK-0906 * $36.68 133HDG-0906 * $40.35 8
2" x ½" 133BLK-1004 * $63.10 133HDG-1004 * $69.39 5
2" x ¾" 133BLK-1006 * $61.97 133HDG-1006 * $68.19 5
The following sizes are sold as a pre-assembled 130 Tee and 247 Adapter
¾" x ½" 133BLK-0604 * $11.58 133HDG-0604 * $12.76 30
1" x ½" 133BLK-0704 * $16.45 133HDG-0704 * $18.12 20
1" x ¾" 133BLK-0706 * $14.46 133HDG-0706 * $18.12 20
1¼" x ½" 133BLK-0804 * $22.83 133HDG-0804 * $25.11 10
1¼" x ¾" 133BLK-0806 * $24.45 133HDG-0806 * $26.89 10
1¼" x 1" 133BLK-0807 * $25.48 133HDG-0807 * $28.05 10
1½" x 1" 133BLK-0907 * $37.96 133HDG-0907 * $41.76 8
1½" x 1¼" 133BLK-0908 * $40.52 133HDG-0908 * $44.57 8
2" x 1" 133BLK-1007 * $65.20 133HDG-1007 * $71.72 5
2" x 1¼" 133BLK-1008 * $67.52 133HDG-1008 * $74.26 5
2" x 1½" 133BLK-1009 * $68.45 133HDG-1009 * $75.30 5
REDUCED PRESS
PRESS PRESS
Item No. 131 Tee - Reducing: Press Run x Reduced FIPT Branch This item is currently in production and may be supplied as a 130 Tee and 243 Adapter if fitting is unavailable.
Size (Run x Branch)
Black Galvanized Carton Qty.Part No. Price Part No. Price
1" x ½" 131BLK-0704 $22.38 131HDG-0704 $24.40 20
1¼" x ½" 131BLK-0804 $28.86 131HDG-0804 † $31.46 10
1½" x ½" 131BLK-0904 † $39.23 131HDG-0904 † $43.17 8
1½" x ¾" 131BLK-0906 * $40.95 131HDG-0906 * $45.05 8
2" x ½" 131BLK-1004 † $49.02 131HDG-1004 † $53.93 5
2" x ¾" 131BLK-1006 † $56.30 131HDG-1006 † $61.93 5
The following sizes are sold as a pre-assembled 130 Tee and 243 Adapter
¾" x ½" 131BLK-0604 * $15.60 131HDG-0604 * $17.14 30
1" x ¾" 131BLK-0706 * $24.98 131HDG-0706 * $27.50 20
1¼" x ¾" 131BLK-0806 * $30.24 131HDG-0806 * $33.27 10
1¼" x 1" 131BLK-0807 * $32.73 131HDG-0807 * $36.01 10
1½" x 1" 131BLK-0907 * $43.08 131HDG-0907 * $47.39 8
1½" x 1¼" 131BLK-0908 * $44.95 131HDG-0908 * $49.43 8
2" x 1" 131BLK-1007 * $61.21 131HDG-1007 * $67.34 5
2" x 1¼" 131BLK-1008 * $62.51 131HDG-1008 * $68.77 5
2" x 1½" 131BLK-1009 * $63.68 131HDG-1009 * $70.06 5
REDUCED FEMALE THREAD
PRESS PRESS
From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com
PRESS FITTINGS FOR STEEL PIPE
01/11
Press: Female Press Socket Joint • P.E.: Male Plain End • MIPT: Male Iron Pipe Thread • FIPT: Female Iron Pipe Thread
* Part Nos. marked with an asterisk will be available Fall 2011. Part Nos. marked with a † are currently in production, please call for availability.
Item No. 270Coupling: Press x Press
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 270BLK-04 $4.36 270HDG-04 $4.75 100
¾" 270BLK-06 $6.38 270HDG-06 $6.96 70
1" 270BLK-07 $8.93 270HDG-07 $9.74 50
1¼" 270BLK-08 $15.56 270HDG-08 * $16.95 30
1½" 270BLK-09 $17.70 270HDG-09 * $19.30 20
2" 270BLK-10 $26.49 270HDG-10 * $28.86 10
Item No. 271Slip Coupling: Press x Press
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 271BLK-04 $7.15 271HDG-04 $7.79 100
¾" 271BLK-06 $9.67 271HDG-06 $10.54 70
1" 271BLK-07 $12.80 271HDG-07 $14.23 50
1¼" 271BLK-08 $16.45 271HDG-08 * $18.46 30
1½" 271BLK-09 $23.60 271HDG-09 * $26.95 20
2" 271BLK-10 $29.19 271HDG-10 * $33.34 10
Item No. 272Coupling: Press x FIPT
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 272BLK-04 * $11.66 272HDG-04 * $12.71 100
¾" 272BLK-06 * $13.51 272HDG-06 * $14.73 70
1" 272BLK-07 * $21.60 272HDG-07 * $23.55 50
1¼" 272BLK-08 * $32.97 272HDG-08 * $35.94 30
1½" 272BLK-09 * $50.58 272HDG-09 * $55.13 20
2" 272BLK-10 * $69.48 272HDG-10 * $75.74 10
Item No. 274Coupling: Press x MIPT This item is currently in production and may be supplied as a 270 Coupling and 240 Adapter if fitting is unavailable.
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 274BLK-04 * $8.25 274HDG-04 * $8.41 70
¾" 274BLK-06 * $13.93 274HDG-06 * $14.18 50
1" 274BLK-07 * $22.26 274HDG-07 * $22.71 40
1¼" 274BLK-08 * $30.71 274HDG-08 * $31.32 30
1½" 274BLK-09 * $32.94 274HDG-09 * $33.59 20
2" 274BLK-10 * $41.60 274HDG-10 * $42.41 10
Item No. 276Coupling - Reducing: Press x Reduced Press This item is currently in production and may be supplied as a 270 Coupling and 247 Adapter if fitting is unavailable.
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
¾" x ½" 276BLK-0604 * $9.34 276HDG-0604 * $10.28 50
1" x ¾" 276BLK-0706 * $10.20 276HDG-0706 * $11.21 30
1¼" x 1" 276BLK-0807 * $14.50 276HDG-0807 * $15.96 20
1½" x 1¼" 276BLK-0908 * $21.73 276HDG-0908 * $23.93 10
2" x 1½" 276BLK-1009 * $24.29 276HDG-1009 * $26.73 8
PRESS
MALE THREADPRESS
FEMALE THREADPRESS
PRESS
PRESS
PRESS
PRESS
SLIP
REDUCED PRESS
Item No. 300Cap: Press
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 300BLK-04 $14.77 300HDG-04 * $15.21 100
¾" 300BLK-06 $19.41 300HDG-06 * $19.81 70
1" 300BLK-07 $30.01 300HDG-07 * $30.89 50
1¼" 300BLK-08 $32.32 300HDG-08 * $33.30 30
1½" 300BLK-09 $51.60 300HDG-09 * $53.07 20
2" 300BLK-10 $66.03 300HDG-10 * $68.01 10
PRESS
From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com
PRESS FITTINGS FOR STEEL PIPE
01/11
Press: Female Press Socket Joint • P.E.: Male Plain End • MIPT: Male Iron Pipe Thread • FIPT: Female Iron Pipe Thread
* Part Nos. marked with an asterisk will be available Fall 2011. Part Nos. marked with a † are currently in production, please call for availability.
Item No. 331Union - Flat: FIPT x P.E.
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 331BLK-04 $12.50 331HDG-04 † $13.62 50
¾" 331BLK-06 $18.34 331HDG-06 † $19.99 50
1" 331BLK-07 $22.17 331HDG-07 † $24.16 50
1¼" 331BLK-08 $33.44 331HDG-08 † $36.45 20
1½" 331BLK-09 $47.01 331HDG-09 † $51.24 15
2" 331BLK-10 $61.91 331HDG-10 † $67.48 15
Item No. 341Union - Tapered: FIPT x P.E.
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 341BLK-04 $12.75 341HDG-04 $13.89 50
¾" 341BLK-06 $18.71 341HDG-06 $20.39 50
1" 341BLK-07 $22.61 341HDG-07 $24.64 50
1¼" 341BLK-08 $33.52 341HDG-08 $36.54 20
1½" 341BLK-09 $47.95 341HDG-09 $52.26 15
2" 341BLK-10 $63.15 341HDG-10 $68.83 15
FEMALE THREAD
MALE PLAIN END
FEMALE THREAD
MALE PLAIN END
Item No. 242Adapter: P.E. (a) x Reduced P.E. (b)
Size (a x b)
Black Galvanized Carton Qty.Part No. Price Part No. Price
¾" x ½" 242BLK-0604 $3.97 242HDG-0604 * $4.33 100
1" x ½" 242BLK-0704 $7.55 242HDG-0704 * $8.23 100
1" x ¾" 242BLK-0706 $7.83 242HDG-0706 * $8.54 100
1¼" x ½" 242BLK-0804 $13.13 242HDG-0804 * $14.32 40
1¼" x ¾" 242BLK-0806 $11.29 242HDG-0806 * $12.51 40
1¼" x 1" 242BLK-0807 * $9.75 242HDG-0807 * $10.62 40
1½" x ¾" 242BLK-0906 * $11.48 242HDG-0906 * $12.51 35
1½" x 1" 242BLK-0907 * $18.11 242HDG-0907 * $19.74 35
1½" x 1¼" 242BLK-0908 * $18.61 242HDG-0908 * $18.93 35
2" x ¾" 242BLK-1006 † 242HDG-1006 † 20
2" x 1" 242BLK-1007 * $20.09 242HDG-1007 * $21.69 20
2" x 1¼" 242BLK-1008 * $22.05 242HDG-1008 * $23.81 20
2" x 1½" 242BLK-1009 * $23.77 242HDG-1009 * $25.67 20
Item No. 247Adapter: P.E. (a) x Reduced Press (b)
Size (a x b)
Black Galvanized Carton Qty.Part No. Price Part No. Price
¾" x ½" 247BLK-0604 $9.42 247HDG-0604 * $10.17 100
1" x ½" 247BLK-0704 $12.16 247HDG-0704 * $13.13 70
1" x ¾" 247BLK-0706 $12.79 247HDG-0706 * $13.81 70
1¼" x ½" 247BLK-0804 $20.26 247HDG-0804 * $21.88 50
1¼" x ¾" 247BLK-0806 $21.26 247HDG-0806 * $22.96 50
1¼" x 1" 247BLK-0807 $22.33 247HDG-0807 * $24.11 50
1½" x ½" 247BLK-0904 $22.71 247HDG-0904 * $24.53 50
1½" x ¾" 247BLK-0906 $23.83 247HDG-0906 * $25.74 50
1½" x 1" 247BLK-0907 $25.03 247HDG-0907 * $27.03 50
1½" x 1¼" 247BLK-0908 $36.49 247HDG-0908 * $39.41 30
2" x ½" 247BLK-1004 $31.51 247HDG-1004 * $34.03 30
2" x ¾" 247BLK-1006 $33.09 247HDG-1006 * $35.73 30
2" x 1" 247BLK-1007 $34.75 247HDG-1007 * $37.53 30
2" x 1¼" 247BLK-1008 $26.28 247HDG-1008 * $28.38 20
2" x 1½" 247BLK-1009 $38.32 247HDG-1009 * $41.39 20
MALE PLAIN END (a)
REDUCED PRESS END (b)
MALE PLAIN END (a)
REDUCED MALE PLAIN
END (b)
Item No. 1270Ball Valve: Press x Press This item is currently in production and will be supplied as a Cim 17 Valve and two 274 Couplings.
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 1270BLK-04 † 1270HDG-04 †
¾" 1270BLK-06 † 1270HDG-06 †
1" 1270BLK-07 † 1270HDG-07 †
1¼" 1270BLK-08 † 1270HDG-08 †
1½" 1270BLK-09 † 1270HDG-09 †
2" 1270BLK-10 † 1270HDG-10 †
PRESS PRESS
Coming Soon!Call For Availability
From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com
PRESS FITTINGS FOR STEEL PIPE
01/11
Press: Female Press Socket Joint • P.E.: Male Plain End • MIPT: Male Iron Pipe Thread • FIPT: Female Iron Pipe Thread
* Part Nos. marked with an asterisk will be available Fall 2011. Part Nos. marked with a † are currently in production, please call for availability.
Item No. 240Adapter: P.E. x MIPT
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 240BLK-04 $4.59 240HDG-04 * $5.00 100
¾" 240BLK-06 $10.62 240HDG-06 * $11.58 100
1" 240BLK-07 $15.25 240HDG-07 * $16.62 100
1¼" 240BLK-08 $18.71 240HDG-08 * $20.39 40
1½" 240BLK-09 $23.48 240HDG-09 * $25.59 35
2" 240BLK-10 $29.84 240HDG-10 * $32.54 15
Item No. 529Adapter: FIPT x P.E.
SizeBlack Galvanized Carton
Qty.Part No. Price Part No. Price
½" 529BLK-04 $7.26 529HDG-04 * $7.91 100
¾" 529BLK-06 $11.27 529HDG-06 * $12.29 100
1" 529BLK-07 $15.25 529HDG-07 * $16.62 100
1¼" 529BLK-08 $19.30 529HDG-08 * $21.03 40
1½" 529BLK-09 $24.28 529HDG-09 * $26.46 30
2" 529BLK-10 $34.06 529HDG-10 * $37.11 15
MALE PLAIN END
MALE THREAD
MALE PLAIN END
FEMALE THREAD
Item No. 246Adapter: FIPT (a) x Reduced P.E. (b)
Size (a x b)
Black Galvanized Carton Qty.Part No. Price Part No. Price
¾" x ½" 246BLK-0604 $9.44 246HDG-0604 * $10.29 100
1" x ½" 246BLK-0704 $11.46 246HDG-0704 * $12.50 100
1" x ¾" 246BLK-0706 $13.49 246HDG-0706 * $14.70 100
1¼" x ½" 246BLK-0804 $13.34 246HDG-0804 * $14.54 40
1¼" x ¾" 246BLK-0806 $15.29 246HDG-0806 * $16.66 40
1¼" x 1" 246BLK-0807 $17.43 246HDG-0807 * $19.00 40
1½" x ¾" 246BLK-0906 $17.54 246HDG-0906 * $19.12 35
1½" x 1" 246BLK-0907 $19.57 246HDG-0907 * $21.33 35
1½" x 1¼" 246BLK-0908 * $20.05 246HDG-0908 * $20.45 35
2" x 1" 246BLK-1007 * $22.89 246HDG-1007 * $23.33 20
2" x 1¼" 246BLK-1008 * $24.49 246HDG-1008 * $24.97 20
2" x 1½" 246BLK-1009 * $27.97 246HDG-1009 * $28.53 20
REDUCED MALE PLAIN
END (b)
FEMALE THREAD (a)Item No. 241
Adapter: P.E. (a) x Reduced MIPT (b)
Size (a x b)
Black Galvanized Carton Qty.Part No. Price Part No. Price
¾" x ½" 241BLK-0604 * $7.76 241HDG-0604 * $8.46 100
1" x ½" 241BLK-0704 * $10.13 241HDG-0704 * $11.04 100
1" x ¾" 241BLK-0706 * $13.18 241HDG-0706 * $14.37 100
1¼" x ½" 241BLK-0804 * $11.69 241HDG-0804 * $12.75 40
1¼" x ¾" 241BLK-0806 * $14.75 241HDG-0806 * $16.08 40
1¼" x 1" 241BLK-0807 * $17.12 241HDG-0807 * $18.66 40
1½" x ¾" 241BLK-0906 * $16.82 241HDG-0906 * $18.33 35
1½" x 1" 241BLK-0907 * $19.18 241HDG-0907 * $20.91 35
1½" x 1¼" 241BLK-0908 * $19.97 241HDG-0908 * $20.37 35
2" x ¾" 241BLK-1006 † 241HDG-1006 † 20
2" x 1" 241BLK-1007 * $20.18 241HDG-1007 * $21.21 20
2" x 1¼" 241BLK-1008 * $23.53 241HDG-1008 * $24.01 20
2" x 1½" 241BLK-1009 * $24.93 241HDG-1009 * $25.41 20
Item No. 243Adapter: P.E. (a) x Reduced FIPT (b)
Size (a x b)
Black Galvanized Carton Qty.Part No. Price Part No. Price
¾" x ½" 243BLK-0604 $4.12 243HDG-0604 * $4.20 100
1" x ½" 243BLK-0704 $8.80 243HDG-0704 * $8.96 100
1" x ¾" 243BLK-0706 $7.96 243HDG-0706 * $8.12 50
1¼" x ½" 243BLK-0804 $9.42 243HDG-0804 * $9.63 40
1¼" x ¾" 243BLK-0806 $10.81 243HDG-0806 * $11.02 40
1¼" x 1" 243BLK-0807 $13.43 243HDG-0807 * $14.46 40
1½" x ½" 243BLK-0904 † 243HDG-0904 † $16.51 35
1½" x ¾" 243BLK-0906 $16.18 243HDG-0906 * $17.47 35
1½" x 1" 243BLK-0907 $15.30 243HDG-0907 * $17.19 35
1½" x 1¼" 243BLK-0908 * $16.85 243HDG-0908 * $18.94 35
2" x ½" 243BLK-1004 † 243HDG-1004 † 20
2" x ¾" 243BLK-1006 † 243HDG-1006 † 20
2" x 1" 243BLK-1007 * $21.35 243HDG-1007 * $21.79 20
2" x 1¼" 243BLK-1008 * $22.14 243HDG-1008 * $22.56 20
2" x 1½" 243BLK-1009 * $25.93 243HDG-1009 * $26.45 20
MALE PLAIN END (a)
REDUCED FEMALE
THREAD (b)
MALE PLAIN END (a)
REDUCED MALE
THREAD (b)