Product Guide

Our products are there to meet you as society steps forward.Amazingly fine high-definition video content can be enjoyed on a display!The efficiency of solar power generation increases further!Safer, more environmentally friendly and comfortable driving experiences are realized!These advances in the world are supported by a wide range of Hitachi Chemical products.Creating innovations for use in our daily life and society.Our technologies and ideas will continue to be expanded and enriched!

INDEX

Semiconductor Related Materials

Inorganic Materials

Polymer Science Materials

Printed Wiring Board Materials

Others

Automotive Products

Energy Storage Devices and Systems

Electronics Components

Products and Services Related toLife Science

Functional Materials

Advanced Components and Systems

P.3

P.3

P.4

P.6

P.7

P.8

P.9

P.10

P.10

Photovoltaic SystemWavelength conversion particle

Lithium ion batteries for industrial use

Aluminum electrolytic capacitors

Power storage systems

Wind Turbine Generator SystemCarbon brushes

Electrical insulating varnishes

Lead acid batteries for industrial use

Plastic film capacitors

Smartphone, Personal ComputerCMP slurries

Die bonding films

Epoxy molding compounds

Carbon anode materials for lithium ion batteries

Glass epoxy multilayer materials

Transparent conductive transfer films

Photosensitive dry films for printed wiring boards

AutomobileHigh-density silicon carbide ceramics

Epoxy resin hardeners

Interior and exterior plastic molded products

Molded plastic rear door modules

High-strength plastic gears

Disc brake pads

Powder metal products

Suspended particle device films

Automotive batteries

TelevisionAdhesive films for surface protection of optical sheets

Circuit connecting films for displays

Quantum dot film

Moisture resistant insulating materials for displays

LED LightWhite epoxy molding compounds for reflectors

High thermally conductive insulation adhesive sheets

KitchenWrapping films for food

Exterior WallAcrylic resins

Building MaterialAdhesives, adhesive tapes

Foamed polyethylene

Important-document Management SystemContactless IC tags

HospitalAllergy diagnostic systems

Semiconductor Related Materials

These are photosensitive material of a coating t ype f o r f o rm ing i n su l a t i n g l a ye r s i n s em i c o n d u c t o r p a c k a g e s , a n d a r e positive-type films that can be developed using an alkali aqueous solution. These can be cured at temperatures as low as 200°C or even lower and fea tu res good cu r ing characteristics.

Chemical Mechanical Polishing (CMP) Slurries are polishing materials used to polish and smooth out the unevenness of the interlayer dielectric and in metal lines formed in the process of characterization. In addition to ceria-type slurry that minimizes polishing damage for STI, we also offer a lineup of slurry for copper wiring formation.

CMP Slurries

Photosensitive Insulation Coatings

Wafer Process Related Materials

These are graphite materials used in anodes of batteries. The product lineup includes artificial graphite featuring high capacity and excellent charging and discharge characteristics with many internal pores and natural graphite featuring a long l i fe through our unique technology to reform grain surfaces.

In motors and generators, these brushes conduct electricity by sliding. We supply a wide variety of carbon brushes from large brushes for electrical generators and railroad cars to small brushes for automobile electrical equipment and micromotors.

Our heat- and chemical-resistant carbon sliding parts are self-lubricating, and therefore no lubrication is required. They can be cut or ground as easily as metal and can be used in variety of industr ial machinery, such as chemical pumps.

These highly dense materials with their smooth, glass-like surface are substantially corrosion resistant. The extremely low rate of missing particles and high solidity give these materials are a broad range of applications, including parts used during semiconductor manufacturing processes, various materials for high-temperature furnaces, crystal breeding crucibles and electrochemical equipment parts.

Carbon Anode Materials for Lithium Ion Batteries Carbon Brushes

Carbon Sliding Materials Glass-like Carbons

Semiconductor Related Materials

Inorganic Materials

These are fine ceramics of pressureless sintered alpha carbide materials that are extremely hard and highly resistant to high temperature and sliding wear. They are used mainly in mechanical seals for automobiles and semiconductor manufacturing equipment components.

These ceramics are made by uniformly and precisely binding very pure, minute crystals, and are used in parts for semiconductor manufacturing equipment and liquid crystal display manufacturing equipment.

High-density Silicon Carbide Ceramics Alumina Ceramics

Ceramics

These hardeners are used as epoxy resin sett ing agents in automotive electronic components and electrical insulators for heavy electric machinery. Because of their excellent transparency they are also used for LED encapsulating resin in electric signboards located in stadium.

Monomers that are used as raw materials for high-molecular materials and as reactive diluents.　These monomers can enhance the performance of polymers by reacting with them. They are used in various applications including photosensitive dry film, materials for touch panels and displays, and a wide variety of adhesives.

Polymer Science MaterialsChemical Raw Materials

Epoxy Resin Hardeners Functional Acrylic Monomers

These materials are mainly used in rubber products , t i res and pa int and come in thermally reactive and non-thermally reactive types. These resins are highly regarded for their superior chemical resistance and thermal stability and are employed in a diverse range o f app l icat ions in both consumer and industrial markets.

These a re sa tu ra ted po lyes te r res ins containing adipic acid or phthalic acid as ingredients. By combining it with various types of isocyanate, polyurethane resins featuring various characteristics such as toughness, water resistance, can be obtained. They are used in synthetic leather, paints, adhesives and building materials.

T h e s e ma t e r i a l s a r e t h e b i n d e r f o r manufacture of casts. The thermosetting p h e n o l r e s i n s a r e emp l o y e d i n t h e manufacture of resin-coated sand for the shell-mold method.

Functional ResinsPolyester ResinsAlkyl Phenol Resins

Phenol Resins for Castings

These materials are used to bond IC chips to lead-frames or package substrates. In addition to having strong adhesion, they help to mitigate the distortions that occur due to differences in the coefficient of thermal expansion of each part. As a result, they c on t r i b u t e t o t h e h i g h r e l i a b i l i t y o f semiconductor packaging.

These protect IC chips from heat, moisture, dust and physical impacts. Its excellent endurance in reflow processing contributes for h i gh r e l i ab i l i t y . Wh i l e r e spond ing to diversifying semiconductor packaging, we offer p r odu c t s t h a t mee t o u r c u s t ome r’s requirements.

Die Bonding Films, Die Bonding Pastes Epoxy Molding Compounds

Coating Materials

Fabrication Process Related Materials

Carbon Products

These materials are mainly used as the base for paints applied to various objects from buildings, cars to digital consumer electronics. Because of their excellent transparency they are also used as coat ing mater ials and adhesives for touch panels.

Acrylic Resins and UV-curable Resins

Functional Materials

Functional Materials

3 Functional Materials 4Functional Materials

These are l iquid coating type insulating materials. Primarily for use as buffer coating layers, passivation and re-wiring insulating layers, a wide range of products to suit various purpose is available including environmentally friendly aqueous developable photosensitive polyimide.

High Heat-resistant Liquid Polyimides

⇒Hitachi Chemical DuPont MicroSystems, Ltd.

These transparent conductive films form electrode pattern on various substrates for touch panels . These fi lms sat i s fy both conductivity and excellent transparency, and enable customer’s upgrading production efficiency because of shortening manufacture process.

Transparent Conductive Transfer Films

This is an optical film that uses quantum dots of semiconductor particulates for conversion of light wavelengths. Images can be displayed at a h igher energy efficiency and more colorfully than by conventional technology by using these optical films in the backlight modules of liquid crystal displays.

Quantum Dot Film

Printed Wiring Board MaterialsBase Materials

These are multi layer materials featuring electric characteristics required for high-speed electric signals and high heat resistance. These are used in network-related equipment such as routers and servers.

These materials are made by impregnating g lass c loth wi th epoxy res in and then laminating copper foil on both sides. They have high heat resistance, high elasticity and low coefficient of expansion, and are used in printed wiring boards and semiconductor package substrates.

Glass Epoxy Multilayer MaterialsGlass Epoxy Multilayer Materials for ICT infrastructure

These are film-type resists which are applied onto the copper-clad laminates to create circuits for the printed wiring boards. These feature high sensitivity, high resolution, and high adhesion with strong tenting ability to create high density patterns.

These are moisture resistant insulating films for semiconductor package substrates. Featur ing a high HAST* res istance, the materials are a dry films free of halogen, protect circuits and prevent short-circuits. Because of its high flatness, it contributes to forming fine wiring.

Photosensitive Dry Films for Printed Wiring Boards Photosensitive Solder Resist Films

These are ultra-small, precision moldings that are used in electronic equipment. Using our unique die design, manufacturing and molding technology, we supply a wide range of products such as connectors with a 0.2mm pitch or concentric connectors less than 5mm in size, strongly supporting miniaturization and weight reduction of equipment.

Small Precision Moldings

Other Polymer Science Materials

Process Materials

These circuit connecting films satisfy both e lec t r i ca l conduct i v i t y and insu la t ion performance and enable the connection of numerous micrometer scale electrodes at a time. They are used widely in smart phones and tablet PCs, contribute to displays of higher definition images and the creation of smaller, thinner devices.

Circuit Connecting Films for Displays

Display Related Materials

Molding Resins

Taking advantages of the characteristics as a phenol resin, these materials have superior heat resistance, mechanical strength and dimensional stabil ity. These are used in electronic components, sl iding parts of engines and various other applications.

Phenolic Resin Molding Compounds

AdhesivesAdhesives, Adhesive Tapes

These products are used in various objects f rom cars to consumer goods , such as automobile interior decoration parts, display panels, air purifier filters and soft drink straws. They contribute for diversifying designs, upg r ad i n g p r oduc t i o n effic i en c y and automating the manufacturing processes.

These are electrical insulating vanishes for impregnating coils in various motors and transformers, and for enameled copper wire. We provide a wide range of products that boast characteristics required for electric appliances, such as high heat resistance, durability and adhesiveness.

These are composite electrical insulating materials used for such purpose as electric power transmission. Owing to a combined fab r i ca t ion method invo l v i ng vacuum impregnation and the pressure curing of epoxy resin, these materials do not contain pores(voids). They have excellent electrical and mechanical characteristics and also enable the manufacture of large-scale products made by autoclave molding.

Electrical Insulating Varnishes Void-free Fiber Reinforced Plastics (FRP)

Electrical Insulating Materials

Functional Films

These films protect the sensitive surface of various optical sheets for displays when they are processed and transported. These films can be pasted on various materials and surface profiles of sheets, and also do not damage them because of leaving only a very small amount of adhesive deposit.

These foamed products , made by h igh foaming of polyethylene, are used in a wide range of fields, as packing materials and heat resistant materials for industry, architecture and vehicles. They have excellent insulating and shock-absorbent properties, and absorb l i t t l e wa te r and mo i s tu re . Secondary fabrication is also easy.

These products, composed of IC chip and antenna, are devices that transmit and receive digital data using radio wave. We supply various tags and cards such as ultra-small tags and metal tags that can be welded. They are used in management of food freshness and important documents, as well as maintenance management of infrastructure.

These films are mainly used in professional settings such as restaurants and hotels. They can be cu t eas i l y and have exce l l en t s t re t chab i l i t y and adhe rence so tha t containers can be wrapped tightly. We supply various sizes from 15 to 60cm in width to meet user requ i rements . We are a l so supplying wrapping film for home use.

Adhesive Films for Surface Protection of Optical Sheets Foamed Polyethylene

RFID* Products:Contactless IC Tags and Cards Wrapping Films for Food

2.5mm

*RFID:Radio frequency identification

Functional Materials

5 Functional Materials 6Functional Materials

Photosensitive Liquid Solder ResistsThese are liquid moisture resistant insulating mater ia l s fo r semiconductor package substrates . They are ha logen- f ree and contr ibute to high packaging rel iabi l i ty because of their high endurance to a heat cycle and reflow processing. The low levels of warpage achieve thinner substrates for package.

These products form resist layers over the flexible circuits and contribute to improve electrical insulation and mechanical durability. They cure at low temperatures and those cured coatings have high elongation, therefore they demonstrate excellent adhesion to the sealants and have bending resistance.

Thermosetting Polyimide Solder Resists for COF*

*COF：Chip On Film

Excellent moisture-resistance enables these products to protect electrodes in such devices as LCDs from moisture. Since the coating has low moisture-permeability and few ionic impurities, it demonstrates excellent migration resistance and contributes to the reliability of the applications.

Moisture Resistant Insulating Materials for Displays

OthersPhotovoltaic Related Materials

These are acrylic resin particles that contain phosphors and are capable of converting short-wavelength light (ultraviolet light) into long-wavelength light (visible light). By using them in the encapsulation sheets of solar panels, ultraviolet light that could not be used in photovoltaic power generation can now be converted into visible light, contributing to increased power generation efficiency.

Wavelength Conversion Particle

In this system, strawberry seedlings before planting are sealed using an evaporated film deposited with aluminum and carbonic acid gas is filled in sealed bags to eradicate noxious insects such as spider mites. An agricultural chemical is not used and spider mites including eggs on the backsides of the leaves can be exterminated thoroughly without providing a drug tolerance to mites.

System for Processing Carbonic Acid Gas for Strawberry Seedlings

Mold Materials

These materials are used for making molds by the shell molding method. High functionality and reliability have been achieved by coating each grain of silica sand with a phenol resin. Various types of sand are available tailored to customer requirements.

Precision Mold Materials (Resin Coated Sand)

Automotive ProductsInterior and Exterior Plastic Molded Products

We supply diverse interior and exterior molded products from small to large sizes such as instrumentation panels, bumpers and front lids. Our unique foaming technology contributes lightweight design, strength and the art of forming.

Automobile rear door modules that were made of metal are now manufactured by molding them using a plast ic resin and combining various rear door components in them. We have developed a composite material featuring high strength, rigidity and resistance to shock, enhancing the automobile design freedom and reducing the automobile weight.

Molded Plastic Rear Door Modules

Plastic Molded Products

These disc brake pads are used in automobiles and motorbikes. Each product has specific features such as super ior braking, noise resistance, and wear resistance that contribute to the improvement of brake performance, reduction of stopping distance, and extension of service life.

Disc Brake PadsThese are park ing brakes for cars wi th s i n g l e - s hoe s t r u c t u r e s . Compa r ed t o double-shoe structures, these brakes are lighter and demonstrate improved braking effect.

Brake Assemblies

Friction Materials

Powder Metal ProductsMachine Parts

Powder metal products are produced by compression molding of metal powders such as iron and copper by a press and are sintered at temperature below the melting point of the metal. Featuring high precision, high resistance to wear, resistance to high temperature and other characteristics, they are widely used in engines, industr ia l equipment and other applications.

BearingsThese bearings are self-lubricating bearings produced by impregnating a lubricant such as oil in tiny open spaces between sintered metal powders. You will find our bearings in motor parts of automotive electric and electronic equipment and in rotating parts of various products including PCs and electric home appliances.

These are molded e lect r ic components produced through integrated molding of a high-durability resin and parts that contain metals. Aluminum parts are now used to reduce the weight of these components and they are used in IPM* housings of electric vehicles, hybrid vehicles and in other applications.

These gears use reinforced fiber as a base material and are made by molding a resin that excels in strength and heat resistance. Used in secondary balancing shaft gears of automobile and ship engines that require extremely high durability and reliability, these gears reduce the overall engine weight and keep noise and vibration to a minimum while automobiles and ships are in cruise mode.

Composite Moldings for Electric and Electronics Components High-strength Plastic Gears

*IPM : Intelligent power module

7 Functional Materials 8Advanced Components and Systems

Advanced Components and Systems

Evaporation Coated Products

These film products are deposited with aluminum. Excelling in strength, reflectivity and heat insulat ion, these films are used in wrapping foodstuffs, agricultural applications to increase cultivation efficiency, emergency blankets and other applications.

Evaporated Films

Thermal Management Materials

These insulating materials have high thermal conductivity (in all directions) with a high degree of adhesion, and are used as heat dissipators. These can enhance the heat dissipation properties of the electronic parts used for power inverters in hybrid automobiles, e lectr ical home appl iances, LED l ights , computer peripheral equipment and so on.

High Thermally Conductive Insulation Adhesive Sheets

LED Materials

These materials are used for the reflector part of the LED package. Using a thermosetting resin, these materials feature less lowering of reflectance even at a high temperature, long life and high reliability.

White Epoxy Molding Compounds for ReflectorsFluorescentlight

Ultravioletlight

⇒Hitachi Chemical Techno Service Co., Ltd.

These systems measure allergen specific IgE antibodies in serum. They provide a highly effective examination method for allergy diagnosis as they allow the measurement of multiple items simultaneously and provide abundant data through a single examination of blood sample.

This product is Japan’s first diagnostic kit for the allergic conjunctivitis that detects Total IgE in tear. It requires no special equipment, and enables results in 10 minutes. Therefore it is expected to be useful as Point of Care Testing.

Diagnostic Kit of Tear Total IgE Detection for Allergic Conjunctivitis

Chlamydia Diagnostic Kits

Multi Wiring Boards

Allergy Diagnostic Systems

Electronics Components

These printed wiring boards are compatible with dense, multilayer devices. These boards are used in high-end telecommunication equipment for cloud computing, including servers, routers and storage devices.

High Layer Printed Wiring Boards

Printed Wiring Boards

Capacitors

These capacitors are widely used in industrial equipment for voltage smoothing of power supply c i rcuits and for cutt ing noise in electronic circuits . We supply compact aluminum electrolytic capacitors that generate a large output and plastic film capacitors that are resistant to humidity and flames and that can be surface mounted.

Aluminum Electrolytic Capacitors, Plastic Film Capacitors

Automotive Batteries

Energy Storage Devices and Systems

These are batteries for automobiles featuring a high durability. A versatile lineup of automotive batteries can also be used in vehicles installed with an idle reduction system, vehicles installed with a charging control system, light automobiles, and business vehicles such as buses and trucks, to support the evolution of the car society.

The batteries are lightweight and compact, allowing charging and discharge of a large current. Thanks to their large capacity, these batteries can be found in backup power supply systems, large stationary systems for storage of electric energy and power supplies for large motor-driven machines such as construction machinery.

Lithium Ion Batteries for Industrial Use

These are industrial storage batteries of a control valve type, featuring long life, high reliability and low maintenance requirements, such as no refilling of water. In addition to backup applications, these are also used in alleviating output fluctuations of renewable energy power generation that is easily affected by weather such as wind power generation.

These are for motor-driven forklifts featuring durability against frequent charging and discharge, and discharge performance at low temperature. The batteries exhibit high performance even under severe conditions such as continuous long-hour operation and sub-zero temperature operation.

Lead Acid Batteries for Industrial Use Traction Batteries

Other Automotive Products

Products and Services Related to Life ScienceDiagnostics / Instruments

Using ELISA* method, these kits detect IgM, IgA and IgG antibodies that are specific to Chlamydia pneumoniae, which causes acute bronchitis, pneumonia and other respiratory disease. These kits are easy for handling, and enable us to obtain objective measurement results.*ELISA: Enzyme-Linked ImmunoSorbent Assay

Advanced Components and Systems

Batteries

9 Advanced Components and Systems 10Advanced Components and Systems

These wiring boards have circuits formed by burying polyimide-coated copper wires into the insulation layer with a wiring machine, and are used mainly in IC testers. The boards achieve high dense and excellent electrical characteristics while realizing simplified designs, resulting in shorter lead times.

These films adjust the transmittance of lights by changing the film color from blue to colorless seamlessly by voltage adjustment. These are widely used in a variety of spaces such as in automobiles, aircrafts and buildings.

Suspended Particle Device FilmsPower off Power on These are single-layered or multilayered

plastic sheets, which can be shape formed. We supply a wide range of products including automobile exterior sheets suitable for spraying and featuring a resistance to shocks and sheets of a high-brightness plating tone, which provide a sense of high grade.

Single and Multi Layer Sheets for Formed Products

The Research Use Only kit for isolation of exosomal mRNA from biological samples such as plasma and urine. Exosomes and microvesicles (EMV) can be captured, mRNA can be isolated and cDNA can be synthesized through a single platform without ultracentrifuge. The kits are used as a tool for biomarker discovery in both academia and pharmaceutical companies.

Research Use Only mRNA Analysis Kit - Blood/Urine

Research Use Only Analysis Reagents

Energy Storage SystemsPower Storage Systems

These are power storage systems that combine bidirectional converters and lead acid batteries or lithium ion batteries. As a power peak cutting system to control the peak in power consumption during daytime by effectively using the electric energy available during nightt ime, these support energy management of factories and offices.

Always stably supplying electric power, the power supply systems instantaneously deal with sudden power failures. We are ready to supply a wide range of systems ranging from large-scale systems that support factories and data centers to small systems for PCs and manufacturing equipment.

Power Supply Systems

Outsourced by pharmaceutical companies and research institutes, we are developing manufacturing methods and are manufacturing high-quality cells for regenerative medicine in our cell cultivation facilities, which incorporate quality control systems.

Regenerative Medicine: A treatment method for transplanting cells derived from in-vitro cultures into the body in order to restore organs or immune functions damaged by injury or disease.

Service for Regenerative MedicineContract Development and Manufacturing forRegenerative Medicine Cells

⇒ Hitachi Chemical Diagnostics, Inc.

BP-E009E Printed in Japan（KZ・H）

GRANTOKYO SOUTH TOWER, 1-9-2 Marunouchi, Chiyoda-ku, Tokyo 100-6606, JAPANTEL: +81-3-5533-7000　FAX: +81-3-5533-7077http://www.hitachi-chem.co.jp/english

Using vegetable oil ink Issued in August 2017