products - tenacore · 2018. 4. 30. · surgical model (7000 series) continuous-intermittent...
TRANSCRIPT
7.5.5-2 Rev. 1
M E D I C A L D E V I C E M A N U F A C T U R E R
Made. Repaired. In the USA.
PRODUCTS CATALOG
www.tenacore.com | phone: 800.297.2241 | fax: 866.776.3101
M E D I C A L D E V I C E M A N U F A C T U R E R
Made. Repaired. In the USA.
2
TENACORE HEADQUARTERS
TABLE OF CONTENTS
Quality / InsuranceVeeVo® Suction RegulatorsVacuum Safety Overflow TrapsOxygen BlendersOxygen and Medical Air Flowmeters
Oxygen Blenders Parts & Accessories Fetal TransducersSPO2 Probes / Extension CablesECG/EKG Cables & LeadwiresProducts and Services Overview
34467
89
101011
1525 East Edinger Avenue, Santa Ana, CA 92705www.tenacore.com | phone: 800.297.2241 | fax: 866.776.3101
QUALITY 3
TENACORE HEADQUARTERSTenacore is dedicated to continuous development of repair and manufacturing capabilities to meet the growing needs of our valued customers. This includes keeping up with current technology as well as identifying commonly replaced parts. Tenacore manufactures OEM-compatible products to help customers reduce repair costs. ISO 13485:2003 certification has been obtained to ensure continuous improvement.
As one of only a handful of ISO-certified repair depots, Tenacore is further distinguished by being registered with the FDA and the State of California as a medical device manufacturer. We apply the same stringent quality, monitoring, and tracking requirements to both our repairs and our manufacturing.
Tenacore is committed to ensuring the quality of innovative medical products, accessories, and services by meeting customer needs while complying with required regulations and standards. Quality management system is always maintained through every process delivered by Tenacore. All products are repaired and tested on-site to manufacturer’s specification by OEM trained technicians. Per the FDA and ISO standard, all test equipment is calibrated at specific intervals and is traceable to NIST standards, ensuring the accuracy of the repaired and manufactured devices.
Tenacore ensures a superior quality system over other service and manufacturing depots by:
• Conducting 100% quality control inspection on all finished devices and repairs
• Complying with ISO 13485:2003
• Complying with FDA, most international standards, and other industry standards for Quality
System Requirements (QSR)
• Having complete traceability for all devices that are manufactured or serviced
• Two product lines with CE approval
• 510k approved medical devices
Tenacore maintains full product liability insurance; the level of insurance is reviewed on a quarterly basis, taking into account the nature of the products and services we provide, industry notices regarding any of the products that we repair, contractual requirements, and the level of sales of the various products and services. The insurance amount will be adjusted accordingly as required.
QUALITY / INSURANCE
PRODUCTS
M E D I C A L D E V I C E M A N U F A C T U R E R
Made. Repaired. In the USA.
4
VEEVO SUCTION REGULATOR
CONTINUOUS SUCTION REGULATOR
VeeVo® suction regulators are compact, easy-to-use and include many unique features. Each unit includes soft Side Grips™ that provide users with a secure grip on the unit to prevent dropping. The Side Grips are offered in a range of colors to aid in identifying departmental ownership.
Adult Model (1520 series)Pediatric Model (820 series)
INTERMITTENT SUCTION REGULATOR
The VeeVo Intermittent regulator is factory set at 15 seconds on, 8 seconds off and offers adjustable timing. Available in Adult and Pediatric models,
Adult Model (1510 series):Pediatric Model (810 series):
CONTINUOUS-FULL SUCTION REGULATOR
Adult Model (3000 series)Surgical Model (7000 series)
CONTINUOUS-INTERMITTENT SUCTION REGULATOR
The VeeVo Continuous-Intermittent regulator is factory set at 15 seconds on, 8 seconds off and offers adjustable timing.
Adult Model (1500 series)Pediatric Model (800 series)
Tenacore’s vacuum safety overflow traps are designed to be light weight, reducing stress on wall outlets, and durable. The polystyrene bottle and ABS lid can be cleaned with Cidex®, or 100% ethylene oxide (EtO) sterilized. DO NOT USE EtO/CFC MIX. DO NOT AUTOCLAVE.Should a collection canister overflow or be incorrectly connected, any liquid will collect in the trap bottle before getting to the suction regulator. As the fluid level increases in the trap bottle, the float will rise and seal off the inlet to the suction regulator, preventing aspirant from fouling the suction regulator.Safety traps are available with a variety of outlet connections. See ordering information below.Replacement parts for overflow safety traps are available in kits of 5 of each part. If fewer than five pieces are required we recommend purchasing complete trap assemblies. Replacement fittings are also available; all are sold individually and have 1/8” MNPT connections. See ordering information below.
VACUUM SAFETY OVERFLOW TRAP
PRODUCTS 5
Made in
USA
AVAILABLE SIDE GRIP™ COLORS (contact Customer Service for custom colors)
No Fitting
1/8” FNPT (NF) Ohio®/Ohmeda® (OD) Chemetron® (CM)
DISS Nut & Nipple (DN) DISS Hand-tight (DH) Puritan-Bennett® (PB)
Oxequip® Med*Star® (MS) Oxequip® Twist (OQ) Extension (X)
Security Cable (S)
Bottom (Inlet) FittingsAVAILABLE OPTIONS
Back (Outlet) Fittings
No Fitting
1/8” FNPT (NF) DISS Male (DM) Tubing Nipple (TN)
Locking Gland (LG) Complete Trap (VT) Hydrophobic Filter (HT)
The available Side Grip colors as of this printing are
Yellow Mint LavenderOrange Green PurplePink Baby Blue WhiteRed Blue Black
Back (Outlet) Fittings
PRODUCTS
M E D I C A L D E V I C E M A N U F A C T U R E R
Made. Repaired. In the USA.
6
Made in
USA
HIGH-LOW FLOW OXYGEN BLENDER
The 120H/L High-Low Flow Oxygen Blender mixes medical grade compressed air and oxygen to provide a pressurized gas source ranging from 21 to 100 percent oxygen.
LOW FLOW OXYGEN BLENDER
The 30L Low Flow Oxygen Blender mixes medical grade compressed air and oxygen to provide a pressurized gas source ranging from 21 to 100 percent oxygen.
Specifications:
• Size: 3.5”H (9cm) x 2.25”W (5.6cm) x 4.5”D (11.5cm)• Model Weight: 2.75 lbs (1.4 kg)• Gas Supply Pressure: 30 – 75 PSIG (2.11kg/cm2 – 5.27 kg/cm2)• Knob Adjustment Range: 21% – 100%• Primary Outlet Flow Range: 3 to 30 LPM (no bleed)• Maximum Flow @ 60% Knob Setting: ≥30 LPM• Flow @ 21% of 100% Knob Setting: ≥30 LPM• Auxiliary Outlet Flow Range: 0 to 30 LPM (bleed 2.5 – 3.5 LPM)• Accuracy: ±3% of full scale over the stated flow ranges• Alarm/Bypass Activation: When inlet gas pressures differ by 20 PSI ±2 or more• Alarm Sound Generator: Vibrating reed• Alarm/Bypass Reset: When inlet pressure differential is 6 PSIG or less• Pressure Drop: Less than 6 PSIG at 50 PSIG inlet pressure and 10 LPM
OXYGEN BLENDERS
PRODUCTS 7
O2 BLENDER OVERHAUL KITS
Tenacore’s O2 blender overhaul kits are a simple way to repair your O2 blenders in house. Each kit includes all of the parts that you need for a blender overhaul.
Overhaul kit available for:
• Bird • Viasys • Siemens • Ohmeda • Ohio Blenders • Tenacore • Omega Low Flow Blenders • Biomed Devices Blenders• Sechrist Blenders
OXYGEN AND MEDICAL AIR FLOWMETERS
Tenacore’s high-quality oxygen and medical air flowmeters feature a durable, light-weight aluminum body, high-strength polycarbonate hood and metering tube, and stainless steel float.They are available as single flowmeters / in Y and T block configurations.
All flowmeters have a warranty against defects in material and workmanship for 1 year from date of shipment.
Y-Block assembly:
Available in many different configurations
PRODUCTS
M E D I C A L D E V I C E M A N U F A C T U R E R
Made. Repaired. In the USA.
8
O2 BLENDER PARTS AND ACCESSORIES
Tenacore Blender Accessory or Part
• TAOBA-00000-01 = Blender Wall Mount• TAOBA-00000-02 = Blender Mount with Pole Clamp• TAOBA-00000-03 = Blender Mount with Eclipse® or Fairfield® Equipment Rail Bracket• TAOBA-00000-04 = Blender Mount with Unimount® Equipment Rail Bracket• DAOBA-00000-05 = O2 Blender Overhaul Kit for Bird, Viasys, Siemens, Ohmeda, select Ohio Blenders• DAOBA-00000-06 = O2 Blender Overhaul Kit for Biomed Devices Blenders• DAOBA-00000-07 = O2 Blender Overhaul Kit for Sechrist Blenders • TAOBA-00000-17 = Blender Water Trap with Two 90-Degree Fittings • TAOBA-00000-08 = O-Ring, Alarm Sleeve and Block Cap, Kit of 15• TAOBA-00000-09 = O-Ring, Inlet and Outlet Connectors, Kit of 20• TAOBA-00000-10 = Water Trap for Bird Big Block 07426• TAOBA-00000-15 = O-Ring, Front Valve Stem, Kit of 5• TAOBA-00000-16 = O-Ring, Rear Seat, Kit of 5• TAOBA-00000-18 = Inlet Duckbill, Kit of 10• TAOBA-00000-19 = Bypass O-Ring, Kit of 10• TAOBA-00000-20 = Alarm Sleeve O-Ring, Kit of 10• TAOBA-00000-21 = Blender Adjustable Wall Mount• TAOBA-00000-22 = Front Valve Seat O-Ring, Kit of 5• TAOBA-PTKIT-15 = High Flow Front Valve Stem• TAOBA-PTKIT-16 = Blender Alarm Assembly, Light Gray• TAOBA-PTKIT-17 = Blender Alarm Assembly, Dark Gray
Full list of parts not listed. Please contact your account manager or customer service representative if the item you need is not listed.
TAOBA-00000-01Blender Wall Mount
TAOBA-00000-02Blender Mount with Pole Clamp
TAOBA-00000-17Blender Water Trap
with Two 90-Degree Fittings
PRODUCTS 9
FETAL TRANSDUCERS
ULTRASOUND TRANSDUCER
An external fetal ultrasound transducer is a device used to detect, measure and record fetal heart rate with a transducer strapped to the maternal abdomen. OEM compatible.
FETAL TRANSDUCER - TOCO TRANSDUCER
An external uterine contraction transducer (i.e. the Tokodynamometer) is a device used to monitor the progress of labor. It measures the duration, frequency, and relative pressure of uterine contractions with a transducer strapped to the maternal abdomen.
FETAL TRANSDUCER - LEG PLATES
A leg plate fastens to an expectant mother’s skin and interconnects electrodes at the fetal scale with an external heart rate monitor. The leg plate also senses voltage at the maternal skin to enable elimination of the maternal heartbeat from the output data.
Made in
USA
PRODUCTS
M E D I C A L D E V I C E M A N U F A C T U R E R
Made. Repaired. In the USA.
10
SPO2 PROBES / EXTENSION CABLES
SPO2 PROBES
A pulse oximeter non-invasively measures the oxygen saturation of a patient’s blood. Tenacore offers OEM compatible SPO2 probes for most monitors on the market today in adult finger clip, soft cuff, pediatric soft cuff, and multi-site varieties. Our adult finger clip utilizes an innovative silicone spring which is much more durable than the standard metal spring clip. At Tenacore, we understand that you do not want to hassle with your SPO2 purchases which is why we offer a broad range of OEM compatible probes to suit your monitoring equipment as well as your budget.
AVAILABLE MODELSBCICorometricsCriticareDatascopeDatexGEHewlett PackardInvivoMasimo
SPO2 EXTENSION CABLES
An extension cable allows you to connect your pulse oximeter probe to the correct monitor. Tenacore offers OEM compatible SPO2 extension cables for most monitors on the market today. At Tenacore, we understand that you do not want to hassle with your SPO2 purchases which is why we offer a broad range of OEM compatible extension cables to suit your monitoring equipment as well as your budget.
ECG / EKG CABLES AND LEADWIRES
Your ECG/EKG cables and leadwires are important to your hospital. At Tenacore, we understand that you do not want to hassle with your cable and leadwire purchases. That is why we offer a broad range of OEM compatible ECG/EKG products to suit your monitoring equipment as well as your budget.
NellcorPhilipsNihon KohdenNoninNovametrixSpacelabsSimensAnd more...
11
MEDICAL EQUIPMENT BOUGHT AND SOLD
MANUFACTURED OEM PATIENT-READY PRODUCTS
Monitors
Modules
Telemetries
Infusion Pumps
Fetal Transducers
SPO2 Products
ECG / EKG Cables
Suction Regulators
Oxygen Blenders
Flowmeters
Ventilators
Electrosurgical Units
Defibrillators
TEE Probes / Ultrasounds
Beds / Gurneys
SERVICES - REPAIRS - EXCHANGES - PARTS
• Patient Monitors
• Telemetry Transmitters
• Patient Modules
• Infusion Pumps
• Syringe Pumps
• Electrosurgical Units
• Ultrasound & TEE Probes
• Surgical Towers
• Surgical Instruments
• Hospital Beds
• O/R Tables
• Ventilators
• Anesthesia Machines
• Defibrillators
• Fetal Monitors
O2 Blenders• Low flow• High flow
Suction Regulators• 3 mode continuous/intermittent• Adult/surgical/pediatric
Flowmeters• Oxygen/medical air• Oxygen regulators• Flow selectors
Fetal Transducers• Toco• Ultrasound• Leg plates
SPO2 Products• Adult/pediatric finger probes• Ear probes/y sensors• Extension cables
ECG / EKG• Patient cables• Lead wires
Parts• Infusion pumps• Blenders/suction regulators• Patient Monitoring
Hose Assemblies• Custom hoses• All gases• Conductive/non conductive
Ma
nagem
ent System Certificatio
n B
od
y
Inst
itute of Global Certification
ISO 13485 CERTIFIED
USA
Institute of Global Certification
M E D I C A L D E V I C E M A N U F A C T U R E R
Made. Repaired. In the USA.
Tenacore Holdings, Inc.1525 East Edinger Avenue
Santa Ana, CA 92705
www.tenacore.comphone: 800.297.2241
fax: 866.776.3101
7.5.5-2 Rev. 1