produktkatalog catalogue
TRANSCRIPT
Kompetenz für Werkzeug und FormenbauCompetence in mould and toolmaking
PRODUKTKATALOG
CATALOGUE
PRODUKTKATALOG
CATALOGUE
BEP-SPANNSYSTEME für BEP-CLAMPING TOOLS for
– SENKEROSION – DIE SINKING
– DRAHTEROSION – WIRE EDM
– PALETTIERSYSTEM – PALLETISING
www.bep-systeme.de
2
INHALTSVERZEICHNIS / INDEX
Markenhinweis - die im Katalog mit (*) gekennzeichneten:Trademark notice - which are marked with (*) in the catalog:
Kompatibel zu EROWA®(*) • Erowa®, ITS®, EWIS®, UPC® sind von Erowa AG markenrechtlich geschützte BezeichnungenKompatibel mit UPC®(*), EWIS®(*), ITS®(*) Spannsysteme der Erowa AG
Compatible to EROWA®(*) • Erowa®, ITS®, EWIS®, UPC® are trademarks protected by Erowa AGCompatible with UPC®(*), EWIS®(*), ITS®(*) clamping systems from Erowa AG
System 3R® und Macro® sind vom System 3R® International AB bzw. deren verbundene Unternehmen markenrechtlich geschützte Bezeichnungen. System 3R® and Macro® are trademarks and registered trademarks of the 3R® International AB or its affiliates
(Hinweis: Wir liefern keine Originalprodukte der Hersteller Erowa®(*), System 3R®(*) oder Hirschmann)(Note: We do not supply original products of manufacturer Erowa®(*), System 3R®(*) or Hirschmann)
SENKEROSION / DIE SINKING
Kompatibel zu EROWA®(*)
Compatible to EROWA®(*)
Kompatibel zu System 3R®(*)
Compatible to System 3R®(*)
Seite 3-20
Page 3-20
Seite 21-33
Page 21-33
ZUBEHÖR / ACCESSORIES Seite 34-42
Page 34-42
DRAHTEROSION / WIRE EDM
Kompatibel zu EROWA®(*)
Compatible to EROWA®(*)
Kompatibel zu System 3R®(*)
Compatible to System 3R®(*)
Seite 43-48
Page 43-48
Seite 49
Page 49
BEP-PENDELSCHRAUBSTÖCKE / PENDULUM VICE Seite 50-51
Page 50-51
BEP-SPANNBALKEN / CLAMPING BARS Seite 52-64
Page 52-64
BEP-Palettiersystem / PALLETISING Seite 65-67Page 65-67
Kupfer / Wolframkupfer / COPPER / TUNGSTEN COPPER Seite 68-69Page 68-69
AGB / GTCT Seite 70-71
Page 70-71
Sehr geehrte Kunden,-
technik für BEP-Systeme. Alle Produkte haben eine Wiederholgenauigkeit von +/- 0,002mm.
Dear Customer,
3
SENKEROSION DIE SINKING
KOMPATIBEL ZU EROWA®(*) COMPATIBLE TO EROWA®(*)
7,5
7,5
7,5
7,57,57,5
69
,269
,269
,2
•
•
• Vierkant-Elektrodenhalter geteilt, dadurch jederzeit
justierbar
• vorbereitet für Chip-Codierung
• Anschlaghöhe 30 mm• Kompatibel ER-007986
• for electrodes, holder splitted and therefore adjustable
• hardened, stainless
• locating face wire eroded
• chip prepared
• locating height: 30 mm
• compatible ER-007986
12
,51
2,5
12
,5
12,512,512,5
75
,27
5,2
75
,2
•
•
• Vierkant-Elektrodenhalter geteilt, dadurch jederzeit
justierbar
• vorbereitet für Chip-Codierung
• Anschlaghöhe 36,5 mm
• Kompatibel ER-010607
• for electrodes, holder splitted and therefore adjustable
• hardened, stainless
• locating face wire eroded
• chip prepared
• locating height: 36,5 mm
• compatible ER-010607
4
16,516,516,5
16
,51
6,5
16
,5
51
51
51
515151
20
20
20 2
9,8
29
,82
9,8 4
14
14
1 •
• für Elektroden und Werkstücke mit Schaftgrößen
bis 15 mm
• Kompatibel ER-010063
• for electrodes and workpieces, shaftsize till 15 mm
and milled slot 16,5 mm
• compatible ER-010063
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3000100 MS Vierkant + Chip Vorbereitung mit Spannzapfen 10
BEP-3000100/1 MS Vierkant + Chip Vorbereitung ohne Spannzapfen 12
20,520,520,5
51
51
51
515151
Werkstücke mit Schaftgrößen bis 20 mm
• Kompatibel ER-009223
for electrodes and workpieces, shaftsize till 20 mm
and milled slot 20,5 mm
• compatible ER-009223
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3000102 MS Nut + Chip Vorbereitung mit Spannzapfen 10
BEP-3000102/2 MS Nut + Chip Vorbereitung ohne Spannzapfen 12
5
515151
26,526,526,5
51
51
51
26,5
26,5
26,5
-
cke mit Schaftgrößen bis 25 mm
• Kompatibel ER-010063
for electrodes and workpieces, shaftsize till 25 mm
and milled slot 26,5 mm
• compatible ER-010063
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3000104 MS Vierkant + Chip Vorbereitung mit Spannzapfen 10
BEP-3000104/4 MS Vierkant + Chip Vorbereitung ohne Spannzapfen 12
404040
515151
51
51
51
41
41
41
29
,82
9,8
29
,8
10
10
10
Ø 7Ø 7Ø 7
Für Elektroden und Werkstücke
• inkl. je 2 Stiftschrauben
• Kompatibel ER-010644
for elctrodes and workpieces• incl. to screw pins
• compatible ER-010644
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3000106 MS Platte + Chip Vorbereitung mit Spannzapfen 10
BEP-3000106/6 MS Platte + Chip Vorbereitung ohne Spannzapfen 12
6
13
13
13
131313
26
,526
,526
,5
26,526,526,5
Ø72Ø72Ø72
44
,244
,244
,2
• Material Stahl
• mit Chipaufnahme
• Maße: Ø 72 x 44,2 mm
• 1 VPE = 6 Stk.
• Kompatibel ER-035209
• made of Steel
• chip prepared
• dimension: Ø 72 x 44,2 mm • 1 packaging unit = 6 pcs.
• compatible ER-035209
• Material Stahl
• mit Chipaufnahme
• Maße: Ø 72 x 44,2 mm
• 1 VPE = 6 Stk.
• Kompatibel ER-035209
• made of Steel
• chip prepared
• dimension: Ø 72 x 44,2 mm • 1 packaging unit = 6 pcs.
• compatible ER-035209
7
44
,20
44
,20
44
,20
45
°45
°45
°
404040
Ø72Ø72Ø72
• Material Stahl
• mit Chipaufnahme
• Maße: Ø 72 x 44,2 mm
• 1 VPE = 6 Stk.
• Kompatibel ER-035212
• made of Steel
• chip prepared
• dimension: Ø 72 x 44,2 mm
• 1 packaging unit = 6 pcs.
• compatible ER-035212
Ø72Ø72Ø72
15
15
15
44
,24
4,2
44
,2
20,520,520,5
101010
• Material Stahl
• mit Chipaufnahme
• Maße: Ø 72 x 44,2 mm
• 1 VPE = 6 Stk.
• Kompatibel ER-035211
• made of Steel
• chip prepared
• Dimension: Ø 72 x 44,2 mm
• 1 packaging unit = 6 pcs.• compatible ER-035211
44
,24
4,2
44
,2
Ø72Ø72Ø72
• Material Stahl• mit Chipaufnahme
• Maße: Ø 72 x 44,2 mm
• 1 VPE = 6 Stk.
• Kompatibel ER-035210
• made of Steel
• chip prepared
• dimension: Ø 72 x 44,2 mm
• 1 packaging unit = 6 pcs.
• compatible ER-035210
8
52
,552
,552
,5
52,552,552,5
71
,271
,271
,2
•
• Zangensitz geschliffen
• vorbereitet für Chip-Codierung
• geringe Bauhöhe
• Kompatibel ER-008566
• hardened
• tongs ground
• chip prepared• low height
• combatible ER-008566
525252
52
52
52
78
78
78
•
• Zangensitz geschliffen
• vorbereitet für Chip-Codierung
• geringe Bauhöhe
• Kompatibel ER-008566
• hardened
• tongs ground
• chip prepared
• low height
• combatible ER-008566
9
52,552,552,5
52
,552
,552
,575
,875
,875
,8
•
• Zangensitz geschliffen
• vorbereitet für Chip-Codierung
• geringe Bauhöhe
• Kompatibel ER-008566
• hardened
• tongs ground
• chip prepared• low height
• combatible ER-008566
• • Zangensitz geschliffen
• vorbereitet für Chip-Codierung
• geringe Bauhöhe
• Spannbereich von 3 - 20 mm
Spannzangenhalter - Set bestehend aus:
• 1 x Spannzangenhalter ER32
• 1 x Spannzangensatz ER32, 18 Stück
• 1 x Dichtungsscheibensatz• 1 x Hakenschlüssel
• 1 x Spannzapfen
• Kompatibel ER-008566
Lieferung im Kunststoffkoffer
• hardened• tongs ground
• chip prepared
• low height
• clamping range of Ø 3 – 20 mm
Set of collets – including:
• 1 x collet chuck holder ER32
• 18 x collets ER32
• 1 x set of gaskets• 1 x clamping spigot
• 1 x spanner
• compatible ER-008566
delivery in a plastic case
10
14
5,2
14
5,2
14
5,2
Ø3 / 5Ø3 / 5Ø3 / 5 • geeignet zum automatischen Ausmessen von
Werkstücken in CNC Senkerodiermaschinen
• mit Messzyklus
• Taster starr
• Messkugel Ø 3 mm, 5 mm
• for automatical measuring of work pieces for
CNC-die sinking machines
• with measuring cycle • rigid sensor
• measuring ball available Ø 3 and 5 mm
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500204 • 3D Messtaster MK Ø 3 mm
• Kombatibel ER-010562
• measuring probe Ø 3 mm
• compatible ER-010562
1
BEP-3500205 • 3D Messtaster MK Ø 5 mm
• Kombatibel ER-008638
• measuring probe Ø 5 mm
• compatible ER-008638
1
Ø30Ø30Ø30
14
614
614
6
• zum Ausrichten des Spannfutters, der Mittigkeit und
Rundlauf
• Kombatibel ER-010723
• For adjustment of jaw chuck, centrical and run out
accuracy
• compatible ER-010723
11
60
60
60
Ø40Ø40Ø40
Ø20Ø20Ø20
• zum Ausrichten des Spannfutters in allen Achsen
• Ermitteln der Nullpunkte
• Kombatibel ER-008617
• for adjustment of jaw chuck on all axis
• zero point indication
• compatible ER-008617
Ø1
15
Ø1
15
Ø1
15
Ø12
Ø12
Ø12
303030 404040
• zum Ausrichten des Spannfutters, der Mittigkeit und
Rundlauf
• inkl. Chipvorbereitung
• Kombatibel ER-032819
• For adjustment of jaw chuck, centrical and run out
accuracy
• chip prepared• compatible ER-032819
12
UNTERFLURHALTER HOLDER FOR GATING SYSTEM
fest variabel
variable
Aufnahme
Fastener
• Kein „Neu Anfahren“ nach Elektrodenwechsel mehr notwendig
• Kompatibel für alle Systeme
•
• Hohe Wiederholgenauigkeit nach Elektrodenwechsel
• Anschnitt bei Mehrfachformen im Bereich von 0,02 mm identisch
•
• Anschnitte mit oder ohne Stauboden möglich, auch mit „Kugel-Spitze“
• Zeitaufwand für Elektrodenwechsel max. 5 Sekunden
• Anschnitt nach Reparaturschweißen wie neu, da sehr hohe Reproduziergenauigkeit
•
• Fehlervermeidung, da kein axialer Versatz
• no restarting after change of electrodes necessary
• compatible with all systems
•
• high repeating accuracy after change of electrodes
• initial cut of multi cavity moulds within the range of 0,02 mm identical
• no observation during the eroding process necessary
• initial cut with or without tunnel gate and also with ball point possible
• change of electrodes within 5 seconds
• initial cut after repair welding as good as new because of high reproducibility
• eroding of diagonal pillars possible
• error prevention because of no axial displacement
13
10
01
00
10
0
555444•
Dokumentation + Aufnahme• Material: 4301, rostfrei
• set box with 4 copper blanks, fastener and
documentation
• material: 4301, stainless1
00
10
01
00
555444 •
Dokumentation + Aufnahme
• Material: 4301, rostfrei
• set box with 4 copper blanks, fastener and
documentation
• material: 4301, stainless
UNTERFLURHALTER / ANGUSSHALTER HOLDER FOR GATING SYSTEM / ANGUS HOLDER
14
Ø2
0Ø
20
Ø2
0
35,835,835,8
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500500 Spannzapfen - Kompatibel ER-015465
spigot - compatible ER-015465
1
BEP-3500501 Spannzapfen - Kompatibel ER-015465spigot - compatible ER-015465
10
BEP-3500502 Spannzapfen - Kompatibel ER-015465
spigot - compatible ER-015465
50
• für automatischen Wechsel
• Schraube mit und ohne Spülbohrung
• bewegliches Ringstück
• for automatic tool change
•
•
505050
50
50
50
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3100200 Zentrierblech
Kombatibel ER-036751
centering Plate compatible ER-036751
5
BEP-3100201 Zentrierblech
Kombatibel ER-009214
centering Plate
compatible ER-009214
50
• Maße: 50 x 50 x 0,6 mm
• Inkl. Stützfüße
• dimension: 50 x 50 x 0,6 mm
• incl. studs
15
909090
90
90
90
Ø100
Ø100
Ø100
• Maße: 90 x 90 x 0,6 mm
• Inkl. Stützfüße
• Kompatibel ER-011599
• dimension: 90 x 90 x 0,6 mm
• incl. studs
• compatible ER-011599
Ø8,2Ø8,2Ø8,2
Ø100
Ø100
Ø100
5 5 5626262
909090
62
62
62
90
90
90
• Maße: 90 x 90 x 5,0 mm
• HRC 48+2, geschliffen
• 4 Schrauben M8 x 21
• 4 Schrauben M8 x 16
• dimension: 90 x 90 x 5,0 mm
• HRC 48+2, ground
• 4 screws M8 x 21
• 4 screws M8 x 16
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3100203 G-Platte
Kompatibel ER-036657
mounting Plate
compatible ER-036657
1
BEP-3100204 G-Platte, 5er Set
Kompatibel ER-036658
mounting Plate 1 Set = 5 pcs.
compatible ER-036658
1
16
363636
56
56
56
44
44
44
444444
565656
M8M8M8
• mit Spanner
•
• Maße: 56 x 56 x 36 mm / 5.000 N
• Kompatibel ER-034387
• incl. Spanner
• stainless steel
• dimension: 56 x 56 x 36 mm / 5.000 N
• compatible ER-034387
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500908-50/3 3-fach Chick Chuck 50 - 3 Spannfutter 50 mit Grundplatte 3-fold Quick Chuck 50 - 3 chucks in 1 base
• •
• Maße: 265 x 65 x 69 mm /
4.500 N
• Kompatibel ER-034387
• stainless steel
• dimension: 265 x 65 x 69
mm / 4.500 N• compatible ER-034387
1
BEP-3500908-50/6 6-fach Chick Chuck 50 - 6 Spannfutter 50 mit Grundplatte6-fold Quick Chuck 50 - 6 chucks in 1 base
•
• Maße: 505 x 65 x 69 mm /
4.500 N
• Kompatibel ER-034387
• stainless steel
• dimension: 505 x 65 x 69
mm / 4.500N
• compatible ER-034387
1
17
Ø100Ø100Ø100
36
36
36 49
,54
9,5
49
,5 • mit Spanner
•
• Spannkraft max. 10.000 N
• Kompatibel ER-036345
• incl. spanner
• stainless steel
• chucking power max. 10.000 N
• compatible ER-036345
• auf Platte montiert
• mit Spanner
• • Spannkraft max. 10.000 N
• Kompatibel ER-038824
• mounted on plate
• incl. spanner
• stainless steel
• chucking power max. 10.000 N
• compatible ER-038824
•
• Spannkraft bis 10.000 Nm
• Maße: 162 x 86 x 151 mm / 6.000 N
• Kompatibel ER-036345
• stainlesss steel
• clamping force up to 10.000 Nm
• dimension 162 x 86 x 151 mm / 6.000 N
• compatible ER-036345
18
•
• Grundplatte 158 x 198 mm•
• Indexierung: 4x90° teilbar
• Maße: 198 x 158 x 67,5 mm
• Kompatibel ER-024312
•
• base plate 158 x 198 mm
• stainless steel
• indexing: 4x90° divisible
• dimension 198 x 158 x 67,5 mm
• compatible ER-024312
10
01
00
10
0
145145145
11
81
18
11
8
68
68
68
•
•
•
• Kompatibel ER-019424
• stainlesss steel
• hardened
•
• compatible ER-019424
•
• Spannkraft 6 Bar / max. 6000 N
• Kompatibel ER-019424
• stainless steel, 57-60 HRC
• force power 6 bar / max. 6.000 N
• compatible ER-019424
•••
•••
•••••
••
•••••••••••••••
•
•
10
01
00
10
0
145145145
11
81
18
11
8
68
68
68
19
56
56
56
36
36
36
69
,56
9,5
69
,5
808080
108108108
• vertikal und horizontal
• für Chip-Codierung vorbereitet, leicht und schnell
zu bedienen
•
• Spannkraft 5.000 N
• Kompatibel ER-020596
• for vertical and horizontal application
•
• stainless steel, 54-57 HRC
• chucking Power 5.000 N
• compatible ER-020596
23
23
23
36
36
36
72
,572
,572
,5
Ø12
,5
Ø12
,5
Ø12
,5
145145145
120120120
10
010
010
0
•
• 6 Bar / KG
• Spannkraft max. 6000 N
• Maße: 150 x 102 x 72,5 mm
• Kompatibel ER-035288
• stainless steel, 56-60 HRC
• chucking power max. 6.000 N
• dimension: 150 x 102 x 72,5 mm• compatible ER-035288
20
565656
12
01
20
12
03
63
63
6
16
7,2
16
7,2
16
7,2
56
56
56 •
•
• Spannkraft 5.000 N
•
• stainless steel
• hardened
• chucking power max. 5.000 N
•
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3200016 1
BEP-3200017 1
® ®(*)
® ®(*)
• Material: 1.2083
• Abmessung: 55 x 55 x 38 mm
• kein Lagerartikel
• Liefertermin auf Anfrage
• material: 1.2083
• dimension: 55 x 55 x 38 mm• not available ex stock
•
21
7,5
7,5
7,5
7,57,57,5
70
,57
0,5
70
,5
• Vierkanthalter
• • Vierkant-Elektrodenhalter geteilt, dadurch jederzeit
justierbar
• vorbereitet für Chip-Codierung, Ausführung mit
original Referenzelement von System 3R®(*)
• locating surface wire eroded, hardened, stainless steel
• for electrodes, holder splitted and therefore
adjustable
• chip prepared, with original reference element 3R®(*)
76
,576
,576
,512
,512
,512
,5
12,512,512,5
•
•
• Vierkant-Elektrodenhalter geteilt, dadurch jederzeit
justierbar• vorbereitet für Chip-Codierung, Ausführung mit
original Referenzelement von System 3R®(*)
• locating surface wire eroded, hardened, stainless steel
• for electrodes, holder splitted and therefore
adjustable
• chip prepared, with original reference element 3R®(*)
KOMPATIBEL ZU SYSTEM 3R®(*) COMPATIBLE SYSTEM 3R®(*)
22
16,516,516,5
16
,51
6,5
16
,5
51
51
51
515151
•
• für Elektroden und Werkstücke mit Schaftgrößen
bis 15 mm
• Kompatibel 3R-658.4E-S.A
• for electrodes and workpieces, shaftsize till 15 mm
and milled slot 16,5 mm
• compatible 3R-658.4E-S.A
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-2000100 MS Vierkant + Chip Vorbereitung mit Zugstange 10
BEP-2000100/1 MS Vierkant + Chip Vorbereitung ohne Zugstange 12
20,520,520,5
51
51
51
515151
•
Werkstücke mit Schaftgrößen bis 20 mm
• Kompatibel 3R-658.2E-S.A
• for electrodes and workpieces, shaftsize till 20 mm
and milled slot 20,5 mm
• compatible 3R-658.2E-S.A
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-2000102 MS Vierkant Nut + Chip Vorbereitung mit Zugstange 10
BEP-2000102/2 MS Vierkant + Chip Vorbereitung ohne Zugstange 12
23
515151
26,526,526,5
51
51
51
26,5
26,5
26,5
•
• für Elektroden und Werkstücke mit Schaftgrößen
bis 25 mm
• Kompatibel 3R-658.4E-S.A
• for electrodes and workpieces, shaftsize till 25 mm
and milled slot 26,5 mm
• compatible 3R-658.4E-S.A
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-2000104 MS Vierkant + Chip Vorbereitung mit Zugstange 10
BEP-2000104/4 MS Vierkant + Chip Vorbereitung ohne Zugstange 12
®(*) ®(*)
®(*) TO EROWA®(*)
• Ausführung mit originalem Referenzelement von 3R®(*)
• Material: 1.2083
• Abmessung: 54 x 54 x 47 mm
• version with original reference element 3R®(*)
• material: 1.2083
• dimension: 54 x 54 x47 mm
24
®(*) ®(*) ®(*)
®(*) ®(*) ®(*)
545454
54
54
54
40
40
40
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500900 Adapter 3R®(*) zur Münze
Adapter 3R®(*) to coin1
BEP-3500901 Adapter 3R®(*) zur Münze Set
Adapter 3R®(*) Set to coin
10
• Ausführung mit originalem Referenzelement von 3R®(*)
• HRC 52 - 54
• Kompatibel zu 3R-466.4033-S
• version with original reference element 3R®(*)
• HRC 52 - 54
• compatible to 3R-466.4033-S
®(*) ®(*) ®(*)
®(*) ®(*) ®(*)
• Ausführung mit originalem Referenzelement von 3R®(*)• HRC 52 - 54
• Kompatibel zu 3R-466.10033
• version with original reference element 3R®(*)
• HRC 52 - 54
• compatible to 3R-466.10033
®(*) ®(*) ®(*)
®(*) ®(*) ®(*)
• Ausführung mit originalem Referenzelement von 3R®(*)
• HRC 52 - 54
• Kompatibel zu 3R-466.15033
• version with original reference element 3R®(*)
• HRC 52 - 54
• compatible to 3R-466.15033
25
KOMPATIBEL ZU SYSTEM 3R®(*) COMPATIBLE SYSTEM 3R®(*)
®(*)
®(*)
545454
54
54
54
12,512,512,5
• Maße: 54 x 54 x 12,5 mm
• im Set 8 Stück
• Kompatibel 3R-651.7E-XS
• dimension: 54 x 54 x 12,5 mm
• set = 8 pcs.
• Compatible 3R-651.7E-XS
®(*)
®(*)
70
70
70
707070 12,512,512,5
• Maße: 70 x 70 x 12,5 mm
• im Set 5 Stück
• Kompatibel 3R-601.7E-P
• dimension: 70 x 70 x 12,5 mm
• set = 5 pcs.
• Compatible 3R-601.7E-P
26
®(*)
®(*)
•
• Spannkraft 4.000 N• Erforderliche Zugstange 3R-605.2 (Kurz)
• Maße: 56 x 31 mm
• stainless steel
• force Power 4.000 N
•
• dimension: 56 x 31 mm
®(*)
®(*)
•
• Spannkraft 4.000 N
• Erforderliche Zugstange 3R-605.2 (Kurz)
• Maße: 265 x 65 x 63 mm
• stainless steel
• force Power 4.000 N
•
• dimension: 265 x 65 x 63 mm
System includes 3 Mini-Chucks mounted on common mounting plate
27
®(*)
®(*)
27
27
27
Ø75Ø75Ø75
•
• Spannfutter für 3R®(*) Macro®(*) Halter
• Spannung mit Inbusschlüssel
• Kompatibel 3R-600.24-RS
• Z-bearing surface: 27 mm
• jaw chuck for “3R®(*)” Macro®(*) holder
• clamping with allen key
• compatible 3R-600.24-RS
•
• Spannfutter für 3R®(*) Macro®(*) Halter
• Spannung mit Inbusschlüssel,
3 Punkt Spannmechanismus
• Kompatibel 3R-610.21-S
• Z-bearing surface: 27 mm
• jaw chuck for “3R®(*)” Macro®(*) holder
• clamping with allen key, 3 point clamping mechanism
• compatible 3R-610.21-S
120120120
145145145
10
01
00
10
0
Ø100Ø100Ø100
23
23
23
54
54
54
•
• Maße:145 x 100 x 77 mm
• Kompatibel 3R-610.46-30
• pneumatic chuck, hardened, 57 - 60 HRC
• chuck power 10.000 N
• dimension: 145 x 100 x 77 mm
• compatible 3R-610.46-30
28
®(*)
®(*)
• Vertikal und horizontal
•
• Kompatibel 3R-625.9
• vertical and horizontal
• hardened, 54 - 57 HRC
• compatible 3R-625.9
®(*)
®(*)
•
• Spannkraft 4.000 N
• erforderliche Zugstange 3R-605.2 (Kurz)
• Kompatibel 3R-652.9
• stainless steel
• force power 4.000 N
• • compatible 3R-652.9
29
®(*)
®(*)
•
• Spannkraft 4.000 N
• erforderliche Zugstange3R-605.2
• Maße: 56*150 mm
• Kompatibel 3R-625.9
• stainless steel
• force power 4.000 N
•
• dimension: 56*150 mm
• compatible 3R-652.9
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3400250 1
Ø3 / 5Ø3 / 5Ø3 / 5
14
6,5
14
6,5
14
6,5
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500201 • 3D Taster Ø 3 mm• Kompatibel 3R-656.21-SP03
• 3D Measuring probe Ø 3 mm
• compatible 3R-656.21-SP03
1
BEP-3500202 • 3D Taster Ø 5 mm
• Kompatibel 3R-656.21-SP05
• 3D Measuring probe Ø 5 mm
• compatible 3R-656.21-SP05
1
geeignet zum automatischen Ausmessen von Werkstücken in CNC-Senkerodiermaschinen
mit Messzyklus
• Taster starr
• Messkugel Ø 3 mm, 5 mm
for automatical measuring of work pieces for CNC-die sinking machines with measuring cycle
• rigid sensor
• measuring ball available Ø 3 and 5 mm
30
14
81
48
14
8
Ø30Ø30Ø30
• zum Ausrichten von System 3R®(*) für Mittigkeit
und Rundlauf
• Kompatibel 3R-606
• for adjustment of 3R®(*) System centrical and run
out accuracy
• compatible 3R-606
Ø20Ø20Ø20
61
61
61
Ø40Ø40Ø40
• zum Ausrichten der 3R®(*) Spannfutter in allen
Achsen• ermitteln der Nullpunkte
• Kompatibel 3R-651.1
• for adjustment of 3R®(*) System jaw chuck, on all
axis and zero point accuracy
• compatible 3R-651.1
31
Ø20
Ø20
Ø20 575757
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500503 Zugstange lang - Kompatibel 3R-605.1.RS
Pull rod long - Compatible 3R-605.1.RS
1
BEP-3500504 Zugstange lang - Kompatibel 3R-605.1.RS
Pull rod long - Compatible 3R-605.1.RS
10
BEP-3500505 Zugstange lang - Kompatibel 3R-605.1.RS
Pull rod long - Compatible 3R-605.1.RS
50
• für automatische Wechsel mit Sicherungsring, rostfrei
for automatic change, with safety ring, stainless
Ø20Ø20Ø20
373737
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500506 Zugstange kurz -Kompatibel 3R-605.2.E
Pull rod short -compatible 3R-605.2.E
1
BEP-3500507 Zugstange kurz -
Kompatibel 3R-605.2.E
Pull rod short -compatible 3R-605.2.E
10
• mit Sicherungsring, rostfrei
with safety ring, stainless steel
32
72
,50
72
,50
72
,50
56,0056,0056,00
56
,00
56
,00
56
,00
• Ausführung mit originalem Referenzelement von
System 3R®(*)•
• vorbereitet für Chip-Codierung
• Kompatibel 3R-659.16P
• with original reference element 3R®(*),
• hardened, tongs ground, stainless steel, low height
• chip prepared
• compatible 3R-659.16P
565656
56
56
56
74
,57
4,5
74
,5
• Ausführung mit originalem Referenzelement von
System 3R®(*)
•
• vorbereitet für Chip-Codierung
• Kompatibel 3R-659.32P
• with original reference element 3R®(*),
• hardened, tongs ground, stainless steel, low height
• chip prepared
• compatible 3R-659.32P
565656
56
56
56
74
,57
4,5
74
,5
• Ausführung mit originalem Referenzelement von System 3R®(*)
•
• vorbereitet für Chip-Codierung
• with original reference element 3R®(*),
• hardened, tongs ground, stainless steel, low height
• chip prepared
33
• Ausführung mit originalem Referenzelement von
System 3R®(*)•
• Zangensitz geschliffen
• vorbereitet für Chip-Codierung
• geringe Bauhöhe
• Spannbereich von 3-20 mm
• Kompatibel 3R-659.32P
• with original reference element 3R®(*)
• hardened• tongs ground
• chip prepared
• low height
• clamping Range of Ø 3-20 mm
• compatible 3R-659.32P
SPANNZANGENHALTER SET bestehend aus:
• 1x Spannzangenhalter ER 32
• 1x Spannzangensatz ER 32, 18 Stück• 1x Dichtungsscheibensatz
• 1x Hakenschlüssel
• 1x Zugstange 3R.605.2
• Lieferung im Alukoffer
SET OF COLLECTS - including:
• 1x Collet Chuck Holder ER 32
• 18x Collets ER 32• 1x Set of Gaskets
• 1x Spanner
• 1x Drawbar 3R.605.2
• delivery in alu case
34
ZUBEHÖR ACCESSORIES
2929297,57,57,5
51
,551
,551
,5
7,5
7,5
7,5
51,551,551,5
•
•
• rostfrei
• Kompatibel ER-007870
•
• locating surface wire eroded
• stainless steel
• compatible ER-007870
12,512,512,5
12
,512
,512
,5
545454
54
54
54
35
35
35 •
•
• rostfrei
• Kompatibel ER-010622
•
• locating surface wire eroded
• stainless steel
• compatible ER-010622
• rostfrei
• stainless steel
35
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-1000 Elektodenrohlinge, Dia 6
Electrode blanks, Dia 6
6
BEP-1001 Elektodenrohlinge, Dia 6Electrode blanks, Dia 6
12
13
13
13
18
18
18
Ø17,5Ø17,5Ø17,5
• Material: ABS
• Maße: 18 x 8 mm, Ø 6 mm
• Kompatibel ER-035154
• material: ABS
• dimension: 18 x 8 mm, Ø 6 mm
• Compatible ER-035154
• Material ABS• 1VPE = 10 Stk.
• material: ABS
• packaging unit = 10 pcs.
36
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-1118 Spannmutter ER16
Clamping nut ER16
1
BEP-1119 Spannmutter ER32Clamping nut ER32
1
BEP-1120 Spannmutter ER40
Clamping nut ER40
1
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-1121 Spannschlüssel ER16-Kompatibel ER-001483
Wrench ER16-Compatible ER-001483
1
BEP-1122 Spannschlüssel ER32-Kompatibel ER-001483
Wrench ER32-Compatible ER-0014831
BEP-1123 Spannschlüssel ER40-Kompatibel ER-001483
Wrench ER40-Compatible ER-001483
1
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500404 Spannzagensatz ER16 (10 Stück)
Collet chuck kit ER16 (10 pcs.)
1
BEP-3500405 Einzelspannzange ER16Single collet chuck ER16
1
37
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500402 Spannzangensatz ER32 (18 Stück)
Collet chuck kit ER32 (18 Pcs.)
1
BEP-3500403 Einzelspannzange ER32Single collet chuck ER32
1
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500406 Spannzangensatz ER40 (25 Stück)
Collet chuck kit ER40 (25 Pcs.)
1
BEP-3500407 Einzelspannzange ER40
Single collet chuck ER40
1
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-120467 Spannzangensatz rostfrei ER16 (10 Stück)
Collet chuck kit stainless ER16 (10 pcs.)
1
BEP-120468 Spannzangensatz rostfrei ER32 (18 Stück)
Collet chuck kit stainless ER32 (18 pcs.)
1
BEP-120469 Spannzangensatz rostfrei ER40 (25 Stück)
Collet chuck kit stainless ER40 (25 pcs.)
1
Besonders geeigenet für Drahterosion
suitable for wire erosios
38
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-300114 Dichtgummis für ER16
Kompatibel ER-010518
Rubber gasket ER16
compatible ER-010518
1
BEP-300115 Dichtgummis für ER32
Kompatibel ER-010518
Rubber gasket ER32
compatible ER-010518
1
BEP-300116 Dichtgummis für ER40Kompatibel ER-010518
Rubber gasket ER40
compatible ER-010518
1
1 VPE = 20 Stück
1 packaging unit = 20 pcs.
39
BH
BH
BH
SPSPSP
LLL
BB
BB
BB
• für Senkerosion, Startlocherosion
•
• Rechtwinkligkeit 0,005
•
• geschliffen
•
• for die sinking
• Parallelism = 0,005 / 100 mm • Perpendicularity = 0,005
• hardened, 58 - 62 HRC
• ground
• not stainless
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BB / JW BH / JH SP / SW L / L
BEP-25 25 9 22 65 1
BEP-36 36 20 40 100 A 1
BEP-38 38 20 44 105 A 1
BEP-50 50 25 65 140 A 1
BEP-63 63 32 85 175 A 1
BEP-73 73 35 100 190 A 1
BEP-80 80 40 100 200 A 1
BEP-88 88 40 125 235 A 1
BEP-100 100 45 125 245 A 1
BEP-125 125 50 160 285 A 1
BEP-150 150 50 200 330 A 1
BEP-150-A 150 50 250 380 A 1
BEP-150-B 150 50 300 430 A 1
40
BH
BH
BH
SPSPSP
LLL
BB
BB
BB
• Spannweite = 100 mm
• Backenbreite = 75 mm
• Backenhöhe = 35 mm
• Rechtwinkligkeit = 0,005 / 100 mm
•
•
• Jaw width = 75 mm
• Jaw height = 35 mm
• Span width = 100 mm• Perpendicularity = 0,005 / 100 mm
• Parallelism = 0,003 / 100 mm
• hardened and ground
Geeignet für Senk- und Startloch Erodiermaschinen
Suitable for die sinking and EDM-drilling machines
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500300 Erodiermagnet
Erosion magnet
1
BEP-3500301 ErodiermagnetErosion magnet
1
Haftkraft max. 70 N/cm², Feinpolteilung
Maße 300 x 150 x 40 mmMaße 500 x 200 x 51 mm
41
Ø3 / 5Ø3 / 5Ø3 / 5
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500207 3D Tischtaster Ø 3 mm
3D Table probe Ø 3 mm
1
BEP-3500208 3D Tischtaster Ø 5 mm3D Table probe Ø 5 mm
1
E R S AT Z TA S T E R
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-3500210 Ersatztaster Ø 3 mm
Replace touch probe Ø 3 mm
1
BEP-3500211 Ersatztaster Ø 5mm
Replace touch probe Ø 5 mm
1
Dieser Tischtaster eignet sich zum
autom. Ausmessen von Werkstücken in
CNC - Senkerodiermaschinen
• Taster starr
• Messkugel Ø 3 mm, 5 mm
for automatical measuring of work
pieces for CNC - Sinking machines
• rigid sensor
• measuring ball Ø 3 / 5 mm
•
•
• Anschraubgewinde M4
• HM-Ball probe Ø 3, length: 56 mm
• HM-Ball probe Ø 5, length: 56 mm
• Thread M4
42
Artikelnummer Item-No.
Bezeichnung Description
Menge Quantity
BEP-332102 Ersatztaster Ø 2 mm
Kombatibel ER-010561
Replacement push button Ø 2 mm
compatible ER-010561
1
BEP-332105 Ersatztaster Ø 5 mm
Kombatibel ER-010560Replacement push button Ø 5 mm
compatible ER-010560
1
Hartmetall inkl. Adapterteil ohne Distanzscheibe
Carbide incl. Adapter part without spacer
43
DRAHTEROSION WIRE EROSION
86
86
86
97
,29
7,2
97
,2
55
55
55
606060
•
• rostfrei
• Winkeleinstellung 360° Grad
• justierbar in 3 Achsen
• inkl. Spannzapfen
• Maße: 60 x 55 x 97,2 mm
• Kompatibel ER-008856
• hardened
• stainless
• angle adjustment 360° Degree
• adjustable in 3 axis • incl. spigot
• dimension: 60 x 55 x 97,2 mm
• compatible ER-008856
38
38
38
49
,24
9,2
49
,2
86
,58
6,5
86
,5
55
55
55
555555
•
• schnelles Spannen von Wellen, Schneidstempeln
und Auswerferstiften bis Ø 32 mm• Optimaler Einsatz auf EDM,
WEDM und Schleifmaschinen
• Maße: 55 x 55 x 86,50 mm
• Kompatibel ER-016691
• hardened
•
ejector pins till Ø 32 mm
• ideal for wire erosion and grinding machines• dimension: 55 x 55 x 86,50 mm
• compatible ER-016691
KOMPATIBEL ZU EROWA®(*) COMPATIBLE ZU EROWA®(*)
44
• zum direkten Spannen auf dem Maschinentisch,
•
• Spannkraft 5.000 N
• Maße: 120 x 150 x 56 mm
• Kompatibel ER-022583
• for direct clamping on the machine table, precision • hardened
• chucking power 5.000 N
• dimension: 120 x 150 x 56 mm
• compatible ER-022583
676767
373737
10
010
010
0
555555
13
013
013
0
100100100
50
50
50
155155155
• zum direkten Spannen auf dem Maschinentisch,
• • Spannkraft 5.000 N
• Maße: 130 x 155 x 67 mm
• Kompatibel ER-022583
• for direct clamping on the machine table, precision
• hardened • chucking power 5.000 N
• dimension: 130 x 155 x 67 mm
• compatible ER-022583
• 5 Spannfutter 50, manuell in Reihe
• rostfrei
•
• Kompatibel ER-030110
• 5 Chucks 50, manual in a Row
• stainless
• length: 338 mm
• compatible ER-030110
45
• für autom. und manuelle Bestückung• Basis für weitere Spannelemente
• Justierbar in X-, Y- und Z-Achse
• Kompatibel ER-030923
• for automatic and manual feeding
• basis for additional clamping elements• adjustable in X, Y, and Z- axes
• compatible ER-030923
• Fixe Z-Lippe
• Spannbacken von oben befestigt•
• Spannbereich: max. 150 x 150 x 40 mm
• Werkstücke können von 0 - 40 mm Höhe geklemmt werden
• Montage erfolgt an Fix- oder Pendelhalter
• Belastbar bis 12 kg
• Kompatibel ER-025895
•
•
• hardened and ground
• clamping range: max. 150 150 40 mm
• workpieces can be clamped from 0-40 mm height
•
• loadable up to 12 kg• compatible ER-025895
46
• Aufnahme zur Montage unterschiedlicher Klemmelemente•
• Montage erfolgt an Fix- oder Pendelhalter 3D
• Kompatibel ER-018937
• mounting for installation for different types of
clamping elements• including Z-pads and bridles
•
• compatible ER-018937
• Winkel mit allem Spannzubehör• Montage erfolgt an Fix- oder Pendelhalter
• Belastbar bis 10 kg
• Kompatibel ER-018938
• angle with all clamping accessories•
• loadable up to 10 kg
• compatible ER-018938
47
• Ausführung mit Prisma und Klemmstück•
• Zylindrische Werkstücke können bis Ø 120 mm
geklemt werden
• Montage erfolgt an Fix- oder Pendelhalter
• Belastbar bis 10 kg
• Kompatibel ER-031179
• version with pism and clamp
• removable Z-pads
• cylindrical workpieces can be clamped up to Ø 120 mm
•
• loadable up to 10 kg
• compatible ER-031179
• Ausführung mit Prisma und Klemmstück
•
• Zylindrische Werkstücke können bis Ø 80 mm
geklemt werden
• Montage erfolgt an der Frontseite der Balkenplatte
(BEP-3200252W) oder an der Frontseite vom Spannbalken• Belastbar bis 6 kg
• Kompatibel ER-019248
• version with pism and clamp
• removable Z-pads
• cylindrical workpieces can be clamped up to Ø 80 mm • installation takes place on the front side ot the bar pallet
(BEP-3200252W) or on the front of clamping bars
• loadable up to 6 kg
• compatible ER-019248
48
• Bewegliche und feste Anschlagbacke•
•
• Spannbereich: 0 - 96 mm
• Montage erfolgt an Fix- oder Pendelhalter
• Belastbar bis 5 kg
• Kompatibel ER-054922
•
• hardened and ground
• corrosion resistant
• clamping range: 0 - 96 mm
•
• loadable up to 5 kg
• compatible ER-054922
• Klemmelement mit Pratzen zum Befestigen von Werkstücken
• Montage erfolgt an Fix- oder Pendelhalter
• Belastbar bis 12 kg
• Kompatibel ER-018940
•
•
• loadable up to 12 kg
• compatible ER-018940
49
• • Winkeleinstellung 360° Grad
• justierbar in 3-Achsen
• inkl. Zugstange 3R-605.2 RS
• Maße: 60 x 55 x 97,2 mm
• Kompatibel 3R-Schraubstock
• hardened, 50-53 HRC, stainless
• angle adjustment 360° Degree
• adjustable in 3-Axis
• incl. Drawbar 3R-605.2RS
• dimension: 60 x 55 x 97,2 mm
• compatible 3R Super Vice
KOMPATIBEL ZU SYSTEM 3R®(*) COMPATIBLE ZU SYSTEM 3R®(*)
•
• schnelles Spannen von Wellen, Schneid- stempeln und Asuwerferstiften bis Ø 32 mm
• optimaler Einsatz auf EDM, WEDM und
Schleifmaschinen
• inkl. Zugstange 3R-605.2 RS
• Maße: 55 x 55 x 86,50 mm
• Kompatibel 3R-207.6
• hardened, 50-53 HRC
• punches and ejector pins till Ø 32 mm
• ideal for wire erosion and grinding machines
• incl. Drawbar 3R-605.2RS
• dimension: 55 x 55 x 86,50 mm
• compatible 3R-207.6
®(*)
®(*)
•
• Spannkraft 5.000 N• zum direkten Spannen auf dem Maschinentisch
• Maße: 130 x 155 x 67 mm
• Kompatibel 3R-622.2
• hardened, 57-60 HRC
• clamping force 5.000 N • for direct clamping on the machine
• dimension: 130 x 155 x 67 mm
• compatible 3R-622.2
50
B A S I C H O L D E R
•
• rostfrei•
• Kompatibel Zeroline C 665 900
• hardened
• stainless• for different types of vices
• compatible Zeroline C 665 900
•
• rostfrei
• Pendelfunktion
• Kompatibel Zeroline C 573 550
• hardened
• stainless
• pendulum function
• compatible Zeroline C 573 550
BEP – PENDELSCHRAUBSTÖCKE PENDULUM VICE
165,00 mm
Höhe: 26,00 mm
80,00 mm
50,0
0 m
m
Höhe: 26,00 mm
70,00 mm
50,0
0 m
m
•
• rostfrei
• Pendelfunktion
• Kompatibel Zeroline C 573 550
• hardened
• stainless
• pendulum function
• compatible Zeroline C 573 550
105,00 mm
15,00 mm
50,0
0 m
m
Höhe: 27,00 mm
Grundhalter mit schmalem Halter
51
PRÄZISIONS - NIEDERZUGSCHRAUBSTOCK
PRECISION - TOOL MAKER VISEmagnetizable chrome steel, stainless through hardened, completely precision ground
• Spannweite: 214 mm
• Backenbreite: 35,5 mm• Backenhöhe: 40 mm
•
• Rechtwinklichkeit 0,005 mm
•
• zur Befestigung auf 40 und 50 mm
Bohrungsraster
• Span width: 214 mm
• Jaw width: 35,5 mm• Jaw height: 40 mm
• Length: 300 mm
• Perpendicularity: 0,005 mm
• Parallelism: 0,01/300 mm
• four Mounting on 40 and 50 mm hole grid
•
• Schaltbares Magnetsystem, Nennhaftkraft: 50 N/cm²
• Polteilung: p=4 mm
• with 4 active magnet areas Type AP/BAP4
• switchable magnet system, adhesive power: 50N/cm2
• pole pitch: p=4 mm
Artikelnr. / Item-No. Bezeichnung / Description Menge / Quantity
BEP-320175 Magnet Spannblock 175 x 64 x 64
Magnet clamping block 175 x 64 x 64
1
BEP-320195 Magnet Spannblock 195 x 64 x 64
Magnet clamping block 195 x 64 x 64
1
52
BEP – SPANNBALKEN BEP – CLAMPING BARS
SONDERANFERTIGUNGEN SPANNSYSTEME CUSTOMISED VERSIONS AVAILABLE
Tel.: +49 (0) 70 42 – 91 7 64 – 0Fax: +49 (0) 70 42 – 91 7 64 – 29
Fon : +49 (0) 7042 – 91764-0
Fax : +49 (0) 7042 – 91764-29
SPANNBALKEN – ACCUTTEX CLAMPING BARS – ACCUTTEX
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen
• für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws
• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-AU3i Spannbalken
Clamping bar
AU-3i
AU-3i
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AU5i SpannbalkenClamping bar
AU-5i AU-5i
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-AU7i SpannbalkenClamping bar
AU-7i AU-7i
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-AU9i Spannbalken
Clamping bar
AU-9i
AU-9i
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AU96i Spannbalken
Clamping bar
AU-96i
AU-96i
1 Set (2 Stk.)
1 Set (2 Pcs.)
53
SPANNBALKEN – ACCUTTEX CLAMPING BARS – ACCUTTEX
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-AU300i Spannbalken
Clamping bar
AU-300i
AU-300i
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AU500i SpannbalkenClamping bar
AU-500i AU-500i
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-AU600i Spannbalken
Clamping bar
AU-600i
AU-600i
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AU750i Spannbalken
Clamping bar
AU-750i
AU-750i
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AU860i Spannbalken
Clamping bar
AU-860i
AU-860i
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AP6040 Spannbalken
Clamping bar
AP-6040
AP-6040
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-GE43F Spannbalken
Clamping bar
GE-43F
GE-43F
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-GE43S Spannbalken
Clamping bar
GE-43S
GE-43S
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-GE53F Spannbalken
Clamping bar
GE-53F
GE-53F
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-GE53S Spannbalken
Clamping bar
GE-53S
GE-53S
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-400SA Spannbalken
Clamping bar
AL-400SA
AL-400SA
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-500SA Spannbalken
Clamping bar
AL-500SA
AL-500SA
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-560SA Spannbalken
Clamping bar
AL-560SA
AL-560SA
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-600SA Spannbalken
Clamping bar
AL-600SA
AL-600SA
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-750SA Spannbalken
Clamping bar
AL-750SA
AL-750SA
1 Set (2 Stk.)
1 Set (2 Pcs.)
54
SPANNBALKEN – AGIE CLAMPING BARS – AGIE
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen
• für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws
• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-Chal2 Spannbalken
Clamping bar
AC Challenge 2
AC Challenge 2
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-Chal3 Spannbalken
Clamping bar
AC Challenge 3
AC Challenge 3
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-Exe2 Spannbalken
Clamping bar
AC Excellence 2
AC Excellence 2
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-Exe3 Spannbalken
Clamping bar
AC Excellence 3
AC Excellence 3
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-Pro4 SpannbalkenClamping bar
AC Progress 4 AC Progress 4
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-Cut20 Spannbalken
Clamping bar
AC Cut 20
AC Cut 20
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-Cut30 Spannbalken
Clamping bar
AC Cut 30
AC Cut 30
1 Set (2 Stk.)
1 Set (2 Pcs.)
55
SPANNBALKEN – AGIE/GFMS CLAMPING BARS – AGIE/GFMS
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-Cut200 SpannbalkenClamping bar
AC Cut 200 AC Cut 200
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-Cut300 Spannbalken
Clamping bar
AC Cut 300
AC Cut 300
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-Cut400 SpannbalkenClamping bar
AC Cut 400 AC Cut 400
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-CutE350 SpannbalkenClamping bar
AC Cut E350 AC Cut E350
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-CutE600 SpannbalkenClamping bar
AC Cut E600 AC Cut E600
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-Cut1000 SpannbalkenClamping bar
AC Cut 1000 AC Cut 1000
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-Cut2000S SpannbalkenClamping bar
AC Cut 2000S AC Cut 2000S
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-Cut3000S Spannbalken
Clamping bar
AC Cut 3000S
AC Cut 3000S
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-VP2 Spannbalken
Clamping bar
AC Progress VP2
AC Progress VP2
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-VP3 Spannbalken
Clamping bar
AC Progress VP3
AC Progress VP3
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-VP4 Spannbalken
Clamping bar
AC Progress VP4
AC Progress VP4
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-CUT P350 Spannbalken
Clamping bar
AC CUT P 350
AC CUT P 350
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-CUT P550 Spannbalken
Clamping bar
AC CUT P 550
AC CUT P 550
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-CUT P800 Spannbalken
Clamping bar
AC CUT P 800
AC CUT P 800
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-CUT P1250 SpannbalkenClamping bar
AC CUT P 1250AC CUT P 1250
1 Set (2 Stk.) 1 Set (2 Pcs.)
NEU im Programm
NEU im Programm
NEU im Programm
NEU im Programm
56
SPANNBALKEN – CHARMILLES CLAMPING BARS – CHARMILLES
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen
• für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws
• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-290P Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-310 SpannbalkenClamping bar
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-510 SpannbalkenClamping bar
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-690 SpannbalkenClamping bar
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-240, 240CC, 240SL Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-440, 440CC, 440SL Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-2050 SpannbalkenClamping bar
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-4030 Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-6030 Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-6050 Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
57
SPANNBALKEN – FANUC CLAMPING BARS – FANUC
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen
• für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws
• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-0C Spannbalken
Clamping bar
Alpha-0C
Alpha-0C
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-1C Spannbalken
Clamping bar
Alpha-1C
Alpha-1C
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-0iC Spannbalken
Clamping bar
Alpha-0iC
Alpha-0iC
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-1iC Spannbalken
Clamping bar
Alpha-1iC
Alpha-1iC
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-0iD Spannbalken
Clamping bar
Alpha-0iD
Alpha-0iD
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-1iD Spannbalken
Clamping bar
Alpha-1iD
Alpha-1iD
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-0iE Spannbalken
Clamping bar
Alpha-0iE
Alpha-0iE
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-1iE Spannbalken
Clamping bar
Alpha-1iE
Alpha-1iE
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-C400 SpannbalkenClamping bar
Alpha-C400iB Alpha-C400iB
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-C600 Spannbalken
Clamping bar
Alpha-C600iB
Alpha-C600iB
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-C800 Spannbalken
Clamping bar
Alpha-C800iB
Alpha-C800iB
1 Set (2 Stk.)
1 Set (2 Pcs.)NEU im Programm
58
SPANNBALKEN – MAKINO CLAMPING BARS – MAKINO
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen • für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-UPN-01 Spannbalken
Clamping bar
M-UPN-01
M-UPN-01
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-UPV-3 Spannbalken
Clamping bar
M-UPV-3
M-UPV-3
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-UPV-5 Spannbalken
Clamping bar
M-UPV-5
M-UPV-5
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-U3, U3 HEAT Spannbalken
Clamping bar
M-U3-HEAT
M-U3-HEAT
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-U6, U6 HEAT Spannbalken
Clamping bar
M-U6-HEAT
M-U6-HEAT
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-U32j SpannbalkenClamping bar
M-U32j M-U32j
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-U53j SpannbalkenClamping bar
M-U53j M-U53j
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-U86 SpannbalkenClamping bar
M-U86 M-U86
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-U1310 Spannbalken
Clamping bar
M-U1310
M-U1310
1 Set (2 Stk.)
1 Set (2 Pcs.)
59
SPANNBALKEN – MITSUBISHI CLAMPING BARS – MITSUBISHI
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen • für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-FA10 Spannbalken
Clamping bar
FA 10
FA 10
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-FA20 Spannbalken
Clamping bar
FA 20
FA 20
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-FA30 Spannbalken
Clamping bar
FA 30
FA 30
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-FA40 Spannbalken
Clamping bar
FA 40
FA 40
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-FA50 Spannbalken
Clamping bar
FA 50
FA 50
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-PA20 Spannbalken
Clamping bar
PA 20
PA 20
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-NA1200 Spannbalken
Clamping bar
NA 1200
NA 1200
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-NA2400 Spannbalken
Clamping bar
NA 2400
NA 2400
1 Set (2 Stk.)
1 Set (2 Pcs.)
60
SPANNBALKEN – MITSUBISHI CLAMPING BARS – MITSUBISHI
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-MV1200 SpannbalkenClamping bar
MV 1200 MV 1200
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-MV2400 SpannbalkenClamping bar
MV 2400 MV 2400
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-MV4800 Spannbalken
Clamping bar
MV 4800
MV 4800
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-MP1200 Spannbalken
Clamping bar
MP 1200
MP 1200
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-MP2400 Spannbalken
Clamping bar
MP 2400
MP 2400
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-MX600 SpannbalkenClamping bar
MX 600 MX 600
1 Set (2 Stk.) 1 Set (2 Pcs.)
61
SPANNBALKEN – ONA CLAMPING BARS – ONA
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen • für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-AF35 Spannbalken
Clamping bar
AF35
AF35
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AF60 Spannbalken
Clamping bar
AF60
AF60
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AF80 Spannbalken
Clamping bar
AF80
AF80
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AF100 Spannbalken
Clamping bar
AF100
AF100
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AF130 Spannbalken
Clamping bar
AF130
AF130
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AV25 Spannbalken
Clamping bar
AV25
AV25
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AV35 Spannbalken
Clamping bar
AV35
AV35
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AV60 SpannbalkenClamping bar
AV60 AV60
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-AV80 Spannbalken
Clamping bar
AV80
AV80
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AV100 Spannbalken
Clamping bar
AV100
AV100
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-AV130 Spannbalken
Clamping bar
AV130
AV130
1 Set (2 Stk.)
1 Set (2 Pcs.)
62
SPANNBALKEN – SEIBU CLAMPING BARS – SEIBU
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen • für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-M35B Spannbalken
Clamping bar
M-35B
M-35B
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-M50B Spannbalken
Clamping bar
M-50B
M-50B
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-M75B Spannbalken
Clamping bar
M-75B
M-75B
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-MM35B Spannbalken
Clamping bar
MM-35B
MM-35B
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-MM50B Spannbalken
Clamping bar
MM-50B
MM-50B
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-MM75B Spannbalken
Clamping bar
MM-75B
MM-75B
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-UMM50B Spannbalken
Clamping bar
Ultra-MM50B
Ultra-MM50B
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-M25LP SpannbalkenClamping bar
M25LP M25LP
1 Set (2 Stk.) 1 Set (2 Pcs.)
63
SPANNBALKEN – SODICK CLAMPING BARS – SODICK
• HRC 52-54
• Pendelfunktion
•
• inkl. Spannpratzen • für die X-Achse
Gerne fertigen wir für Sie auch in der Y-Achse
Weitere Maschinen auf Anfrage
• HRC 52-54
• pendulum function
• stainless
• incl. clamping claws and screws• X-axis
We are also offering in Y-axis
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-300 Spannbalken
Clamping bar
VZ 300 L
VZ 300 L
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-400L, 400PLP Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-400LP Spannbalken
Clamping bar
AG 400 LP
AG 400 LP
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-600L, 600PLP Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-600P Spannbalken
Clamping bar
AG 600 LP
AG 600 LP
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-750 Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-900 Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-1200 SpannbalkenClamping bar
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-1500 SpannbalkenClamping bar
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-250 SpannbalkenClamping bar
AP 250 L AP 250 L
1 Set (2 Stk.) 1 Set (2 Pcs.)
64
SPANNBALKEN – SODICK CLAMPING BARS – SODICK
Artikelnummer Item-No.
Bezeichnung Description
Maschine Machine
Menge Quantity
BEP-SL400 Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-SL600 Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-SLC400 SpannbalkenClamping bar
SLC 400 G SLC 400 G
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-SLC600 Spannbalken
Clamping bar
SLC 600 G
SLC 600 G
1 Set (2 Stk.)
1 Set (2 Pcs.)
Spannbalken
Clamping bar
1 Set (2 Stk.)
1 Set (2 Pcs.)
SpannbalkenClamping bar
1 Set (2 Stk.) 1 Set (2 Pcs.)
BEP-ALC400G Spannbalken
Clamping bar
ALC 400 G
ALC 400 G
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-ALC600G Spannbalken
Clamping bar
ALC 600 G
ALC 600 G
1 Set (2 Stk.)
1 Set (2 Pcs.)
BEP-ALC800G Spannbalken
Clamping bar
ALC 800 G
ALC 800 G
1 Set (2 Stk.)
1 Set (2 Pcs.)
65
222222
22
22
22
222222
22
22
22
Ø148Ø148Ø148
222222
22
22
22
404040
• •
• inkl. Spannzapfen und Chipaufnahme
• Kompatibel ER-015899
• hardened
• for die sinking and milling, with centering element
• incl. spigot, chip prepared
• compatible ER-015899
404040
Ø148Ø148Ø148
12,512,512,5
252525252525 252525
12
,51
2,5
12
,5 25
25
25
25
25
25
25
25
25
•
•
• inkl. Spannzapfen und Chipaufnahme• Kompatibel ER-033053
• hardened
• for die sinking and milling, with centering element
• incl. spigot, chip prepared
• compatible ER-033053
•
• Lochbild oder Gewinde für Verschraubungen
können nach Ihren Angaben angebracht werden
• Kompatibel ER-032699
• for milling operation
•
• compatible ER-032699
BEP-PALETTIERSYSTEM BEP-PALLETISING
66
• Blank
• inkl. Zentrierelemente, Spannzapfen und
• auch in verschiedenen Bohrbildern verfügbar,
(z.B. Ausführung mit Gewinde M12 und Raster- bohrung 12F7 Abstand 50 mm)
• Bohrbild für Automation und Greifer angebracht
• Kompatibel ER-016917
• blank
• incl. centering elements, spigots and hardened
Z-supporting
• also available in different bore pattern with threads
M12 and bore grid 12F7 distance 50 mm
• bore pattern for automation and gripper prepared
• compatible ER-016917
• rostfrei
• Kupplung für Paletten, inklusive Schrauben und
Spannzapfen
• Maße: 150 x 38 x 20 mm
• Kompatibel ER-036347
• stainless
• coupling for pallets, incl. screws and spigots
• dimension: 150 x 38 x 20 mm
• compatible ER-036347
67
•
• Grundkörper Stahl
• Haltekraft 150 N/cm²• Bohrbild für Automation und Greifer angebracht
• Kompatibel ER-70580
• permanent magnet clamping plate for milling operations
• basic body made of steel
• magnetic holding power 150 N/cm2
• bore pattern for automation and gripper prepared
• compatible ER-70580
• Palette mit Magnetspannplatte
• Grundkörper Alu
• Haltekraft 100 N/ cm²•
• Bohrbild für Automation und Greifer angebracht
• Kompatibel ER-090679
• pePallet with magnet clamping plate
• basic body made of aluminium
• magnetic holding power 100 N/cm2
• cross pole pitch 1,4 x 0,5 mm
• bore pattern for automation and gripper prepared
• compatible ER-090679
68
ROHLINGE KUPFER BLANKS COPPER
• Für Vierkanthalter 15 x 15 mm und 25 x 25 mm
•
•
•
•
• locating surface and chamfer angular milled
Artikelnummer Item-No.
Bezeichnung Description
Länge Length
Menge Quantity
BEP-3500700 ECU-Rohlinge 15 x 15 x 80
ECU-Blanks 15 x 15 x 80
80 40
BEP-3500701 ECU-Rohlinge 25 x 25 x 90
ECU-Blanks 25 x 25 x 90
90 24
69
ROHLINGE WOLFRAMKUPFER BLANKS TUNGSTEN COPPER
Artikelnummer Item-No.
Bezeichnung Description
VerpackungseinheitVPE
BEP-2000300 2,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000301 3,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000302 4,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000303 5,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000304 6,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000305 8,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000306 10,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000307 12,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000308 13,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000309 14,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000310 15,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000311 16,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000312 18,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000313 20,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000314 22,0 mm 300 mm 5 Stk. / 5 Pcs.
BEP-2000315 25,0 mm 300 mm 3 Stk. / 3 Pcs.
BEP-2000316 30,0 mm 300 mm 3 Stk. / 3 Pcs.
BEP-2000317 35,0 mm 300 mm 3 Stk. / 3 Pcs.
BEP-2000318 40,0 mm 300 mm 1 Stk. / 1 Pcs.
BEP-2000319 45,0 mm 300 mm 1 Stk. / 1 Pcs.
BEP-2000320 50,0 mm 300 mm 1 Stk. / 1 Pcs.
BEP-2000321 60,0 mm 300 mm 1 Stk. / 1 Pcs.
BEP-2000322 70,0 mm 300 mm 1 Stk. / 1 Pcs.
70
AGB GTCT (GENERAL TERMS AND CONDITIONS OF TRADE)
Geltung der AGB
--
tragsbestandteil, wenn dies ausdrücklich schriftlich vereinbart ist.
BestellungUnsere Angebote sind freibleibend. Bestellungen sowie mündliche Vereinbarungen sind für uns verbindlich. Für Gewer-
nur gegen eine Wiedereinlagerungsgebühr in Höhe von 20% zu-rückgegeben werden. Die Versandkosten werden nicht erstattet.Die Sonderanfertigungen können nicht zurückgenommen werden.
Preise, Berechnung und ZahlungFür die Berechnung sind die am Versandtag gültigen Preise maßge-bend, die sich ab Werk, ausschließlich Fracht, Porto, Verpackung und Umsatzsteuer verstehen. Unsere Rechnungen sind zahlbar in-nerhalb 15 Tage nach Rechnungsdatum netto. Bei Zahlung inner-
Lieferung und AbnahmeVereinbarte Liefertermine beziehen sich auf das Versanddatum der
unter Ausschluss weiterer Rechte nach Ablauf einer von ihm schriftlich zu setzenden angemessenen Nachfrist vom Vertrag zurücktreten. Unse-
von unseren Lieferanten, Verkehrsstörungen, behördliche Verfügungen
zur Lieferung, bzw. Abnahme. Wird hierdurch die Lieferung bzw. Abnah-me um mehr als 2 Monate verzögert, so ist jede der Parteien unter Aus-schluss weiterer Ansprüche berechtigt, hinsichtlich der von der Liefer- bzw. Abnahmestörung betroffenen Menge vom Vertrag zurückzutreten.
Verpackung und Versand-
-
Gewährleistung und Mängelrügen
vereinbarten Beschaffenheit und für den vorgesehenen Einsatzzweck geeignet ist. Wird diese Prüfung unterlassen, nicht in dem gebotenen
--
-nate nach Auslieferung der Ware am Versandort, angezeigt werden. Beanstandungen sind schriftlich unter Angabe der Bestelldaten, der Kunden-, Rechnungs- und Versandnummer zu erheben. Beanstandete
-
werden wir nach unserer Wahl unter angemessener Berücksichtigung -
tausch oder Rücknahme der Ware gegen Erstattung des Kaufpreises
-
sind. Wir behalten uns berechnete Mehr- oder Minderlieferungen bis zu
+- 10% vor. Abweichungen oder Änderungen von der vertraglich ver--
Auskünfte und RaterteilungAuskünfte über Verarbeitungs- und Anwendungsmöglichkeiten unserer Produkte, technische Beratungen und sonstige Angaben erfolgen nach bes-tem Wissen, jedoch unverbindlich und unter Ausschluss jeglicher Haftung.
Haftung, Rücktritt
verlangen oder vom Vertrag zurücktreten, in denen es in diesen Be-dingungen ausdrücklich bestimmt ist, eine weitergehende Haftung von uns – gleich aus welchem Rechtsgrund, auch wegen Verletzungen ver-
--
EigentumsvorbehaltAlle Lieferungen erfolgen unter Eigentumsvorbehalt. Die gelieferte Ware
-
--
gentum an dem Zwischen- oder Enderzeugnis erwirbt. Bei Verarbeitung
gelieferten Vorbehaltswaren zum Wert der fremden Ware im Zeitpunkt der Verarbeitung. Das gleiche gilt bei Verbindungen oder Vermischungen
ihm hieraus entstehenden Vergütungsanspruch gegen Dritte ab. Der -
-
--
Incoterms bei Auslandsgeschäften-
len Handelskammer in Paris herausgegebenen „Incoterms“, jeweils in der bei Durchführung des Auftrages geltenden neuesten Fassung.
-
vorstehenden Klauseln unwirksam sein oder werden, so sollen an-stelle der unwirksamen Bedingungen solche Regelungen treten, die dem wirtschaftlichen Zweck des Vertrages unter angemesse-
Stand: Juni 2018
71
AGB GTCT (GENERAL TERMS AND CONDITIONS OF TRADE)
Validity of GTCTBelow listed business and delivery terms are valid for all de-livery transactions of the vendor. Deviating terms, especi-ally purchasing terms of the purchaser are only part of the contract if expressed in written form contractually agreed.
Order
are obligatory for us.The right of revocation is invalid for traders or self-employed per-sons. In this case, the duly delivered products can only be returned for a 20% re-entry fee. The shipping costs will not be refunded.The special products can not be taken back.
Prices, calculation and paymentFor the calculation on the day of shipment are the valid prices binding, which are ex works, excluding freight, postage, packaging and sales tax ( domestic ). Our invoices are payable within 15 days after invoice date, net. By payment within 8 days after invoice date we grant 3% discount. Terms outside of Germany are always ex works, excluding freight, customs and packaging and payment in advance before delivery.
Delivery and acceptanceAgreed time of deliveries refer on the date of dispatch of the goods. By culpably caused extension of the delivery deadline the purchaser is permitted by exclusion of further rights after expiration to with-draw the contract. In that case, the purchaser has to give the ven-dor an appropriate grace period in written form. Our obligation of delivery is in abeyance, as long as the purchaser is in a dept-due.
Unforeseeable event of exceeding the delivery date, supply shortage
other cases of force majeure, set the vendors contract out of an agree-ment for an obliged delivery or acceptance, for the time of the distur-
In case, due to these disturbances the delivery or acceptance is extended by more than 2 months, each party is permitted un-der exclusion of further claims regarding on the delivery or ac-
Packaging and dispatchAll shipments travel at the buyer`s risk. Shipping method and shipping route are chosen by us. We will take all efforts to meet the buyer`s wishes, in that case additional costs are at the expense of the buyer.
Warranty and reprehend detected defectsThe buyer hast to inspect, if the supplied goods are in the conditi-on according to the contract at it`s state and foreseen purpose sui-table. If the inspection is omitted, not done in full extend or visible defects are not immediate, the latest within 14 days after receipt of
Defects which are invisible to the eye obtain as appro-ved, if the detection is not reported immediate, the latest 6 months after delivery of the goods at the point of departure.
To bring complaints to notice in written form the buyer has to mention the purchase data, the customer; invoice and tracking number. The defective goods are only to be returned with our approval and demand.
-ate consideration and interests of the buyer by price deduction, rework, replacement or return of the goods against buying price accordingly. In case we do not accomplish these obligations, the buyer is permitted to
choose his rights. Additional claims of the buyer are, insofar legally re-cognized, excluded, especially for replacement of damages, which have not been caused immediate on the goods itself. Subject to alterations for us are additional or undersupplying up to +/- 10%. Variations or
Information and to counsel/strongInformation about processing – or applicability of our products, techni-cal consulting and miscellaneous data follow by our best knowled-ge, however without obligation and under exclusion of any liabilities.
Liability, withdrawalThe buyer is only able to demand in cases of the amount compensation or to withdraw from the contract, in any such case of these terms par-ticulary appointed, ulterior proceedings of liabilities by us, regardless of which rights, even the violation of contract by accessory obligations and unlawful act, is excluded, unless, that we are by reason of malice or wanton negligence by obligatory legal restraint of unlimited liability.
Reservation of titleAll supplies are on reservation of title. The supplied goods remain pro-perty of the vendor until payment in full of the sales prices and all other outstanding accounts of the vendor against the buyer during the ongoing
If goods subject to retention of title are processed by the buyer, so ensued the processing for the vendor, for this reason the vendor is
By processing with other goods, which are not property by the -
tion of the value of the supplied goods subject to retention up to a value of the third-party product at the point of time at its processing.
948 BGB (german civil code) of goods subject to retention with third-par-ty products. The buyer is entitled to sell the goods or processed product in proper conduct. The buyer as of today is to assign a claim in full
The buyer is authorized and obliged to collect all claims, as long as the vendor unrevoked the warrant.
The warrant to pay by direct debit by the buyer expires without expli-cit declaration of the vendor, on the buyer cessation of payment. The vendor will not insist on the warrant to pay by direct credit, as long as
to retention means always from the buyer to the vendor invoiced price.
Incoterms by foreign businessIn addition to these terms the released terms and conditions “ Inco-terms “ by the international chamber of commerce in Paris are in legal force at its current corrected version during the time of its enforcement. Governing law and place of jurisdiction on all advances of sales con-
terms are or will be legally void, in that case these legally void terms should replace regulations which follow the commercial purpose of the contract under closest acting reasonably on a mutual consent interest.
Stood: June 2018
Ihr AnsprechpartnerYour contact person
BEP-Systeme GmbH
71665 Vaihingen / Enz Fax: +49(0) 7042-91764-29 Internet: www.bep-systeme.de