profession, technique, service, quality and creativity are...

一流機械電子人才，提供扭力、拉力相關知識、檢測方法與分析，並推薦最佳方案。

電子電路設計能力與精密分析儀器，提升電路準確性；軟、韌體開發能力，提供人性化界面；

機械設計能力，提高產品可靠度及壽命。

從洽詢、報價、成交、交貨、訓練、維護皆有專業服務，提供免費軟體更新。

業界第一，電路板與力量、扭力測試儀器提供兩年保固。

領先業界，全台灣第一台萬能扭力試驗機，持續研發與國際競爭。

Profession, technique, service, quality and creativity are the principles of Yang Yi Technology Co., Ltd.

Profession: Professional specialists are from mechanical and electrical background. Offer torsion and tension knowl-edge, testing methods and professional analysis ability. Recommend the best solution.

Technique:Increase accuracy by electrical circuit design and precision instruments. Supply humanized interface by software and firmware development. Improve reliability and endurance by mechanical design. Service: Services include inquiry, quotation, contract, delivery, training and maintenance. Free for software update.

Quality: 2 years warranty for circuit board, tensile and torsion testing machine.

Creativity: Develop the first Universal Torsion Testing Machine in Taiwan and continue innovating to compete with international.

陽屹科技秉持著專業、技術、服務、品質、創新的理念作為經營的原則

專業

技術

服務

品質

創新

2www.yy-tech.com.tw

˙2004 「陽屹科技股份有限公司」成立

˙2005 K系列控制器、A2控制系統及軟體設計

˙2006 YM-A01自動篩選系統，第一台客製自動檢測系統

˙2008 YM-D01 測厚儀

˙2009 與優力國際安全認證公司(UL)合作，研發鋰電池防爆型高低溫試驗機

˙2010 YM-T系列萬能扭力試驗機

˙2012 與優力國際安全認證公司(UL)合作，研究環境試驗機控制技術

˙2013 YM-H31 1kN小型萬能材料試驗機

˙2014 拉伸扭矩複合試驗機

˙2015 YM-V01 影像快速量測機、代理義大利Affri硬度試驗機

˙ 材料試驗機 Material testing machines

萬能材料試驗機

高低溫材料試驗機

鋰電池試驗機

Universal material testing machinesHigh low temp material testing machinesLithium battery testing machines

˙ 扭力試驗機 Torque testing machines

萬能扭力試驗機

扭力計/開瓶扭力機

立式扭力試驗機

扭力板手校正器

Universal torsion testing machinesTorque indicator/closure torque testerVertical torsion testing machinesTorque wrench calibrators

˙ 其他物性儀器 Other physical testing machines

˙ 儀器軟體與控制系統 Software and controlling system

˙ 自動化檢測儀器 Auto testing machines

緊固件檢測儀器

橡塑膠檢測儀器

紡織檢測儀器

Fastener testing machinesRubber/Plastic testing machinesTextile testing machines

˙2004 “Yang Yi Technology Co., Ltd.” established

˙2005 K Series, A2 controlling system & software

˙2006 YM-A01 Auto measuring and sorting system, the first auto inspection controlling system customized

˙2008 YM-D01 Thickness tester

˙2009 Cooperating with UL developed Blast Resistant High Low Temp Material Testing Machine for Lithium Battery

˙2010 YM-T Series Universal Torsion Testing Machine

˙2012 Cooperating with UL, research for environment testing machine controlling technique

˙2013 YM-H31 1kN Universal Material Testing Machine

˙2014 Tensile and Torsion Testing Machine

˙2015 YM-V01 Automatic Optical Image Measurement System ; Italy AFFRI Hardness Tester agent

公司沿革

產品 Produc ts

History

依機型可測高達1m長度之木結構螺絲旋入阻力試驗

最大扭矩200Nm，可滿足較大直徑螺絲扭斷試驗

採自然重力，搭配不同配重，模擬實際操作重量

可選購電動Z軸，自動上升與下降，方便操作

防鬆螺帽旋入與旋出的預置扭矩試驗(不含夾緊力)

伺服馬達與精密減速機相互搭配，滿足不同速度與扭矩規格

滿足EN14592、EN15737、EN10666、ISO 2702等規範

Max. 1m length Timber screws for torsional test

Capacity up to 200Nm, satisfy big screw breaking test

Different gravity to simulate the real situation

Optional auto Z axis for auto movement to operate easily

Torsional resistance test for locking nut (exclude clamp force)

Work with servo motor and precision reducer to staisfy demand

Satisfy EN14592, EN15737, EN10666, and ISO 2702

特點∕Features

YM-T立式系列萬能扭矩試驗機 Vertical Series Universal Torsion Testing Machine

Original Design & Production: Yang Yi Technology Co., Ltd.Profession Technique Service Quality & Creativity

選購配件∕Optional Accessory

說明 Instruction 照片 Photo 照片 Photo說明 Instruction

靜態扭力感測器Static Torque Sensor

標準四角輸出，可接各式套筒

Standard square output forvarious sockets

砝碼Weight

0.5、1.0、2.0、5.0、10.0kgf0.5、1.0、2.0、5.0、10.0lbf

三爪定位夾3-claw chuck

扭斷測試用

For breaking test

Z軸光學尺Linear scales for Z axis

量測旋入深度，解析0.005mmDepth measure, resolution 0.005mm

鑽頭夾具Drill chuck

可夾持各式起子頭或起子套筒

For bits or bits holder

X-Y精密手動平台X-Y manual Table

附刻度尺，方便操作定位

Easy operation by scale

空壓虎鉗Pneumatic Vice

最大夾持力可達3000kgf

3000kgf for clamping force

防跳脫套筒Came out-resistant socket

避免起子頭與螺絲頭部跳脫

Avoid Bit came out during the test

High speed 16 bits and independent analog to digital IC

Expand up to 6 analog signal sets and 3 encoder signal sets

FPGA high speed logical IC to enhance the efficiency

Increase the high stability of the sensors by signal filter

Equipped with PID motor control; 32 bits Encoder Counter

64k bits memory; I/O input & output; remote controller

USB transmission export, available for PC or laptop

高精度獨立放大器與高速16位元類比轉數位IC

可擴充至6組類比訊號與3組譯碼器信號

採用FPGA高速邏輯運算IC，提高效能

信號濾波處理，提高感測器穩定度

PID馬達控制、32位元譯碼器計數器

64k bits記憶體、I/O 輸入輸出、專用線控盒

採USB輸出，滿足筆記型或桌上型電腦

特點∕Features

控制系統 / Control System

6www.yy-tech.com.tw

規格∕Specification

型號 Model YM-T15A2YM-T12A2YM-T15A2

型式

容量

減速比

轉速

最大行程

適用螺絲長度

角度解析

減速機

伺服馬達

資料傳輸率

操作空間

移動行程

尺寸(WxDxH)

重量

電源

Type

Capacity(N-m)

Gear Ratio

Velocity(rpm)

Max Stroke(mm)

Screw Length(mm)

Resolution

Reducer

Servo Motor

Data Rate(Hz)

Operation Space(mm)

Moving Stroke(mm)

Dimensions(mm)

Weight(kg)

Power Supply

YM-T22A2

低背隙行星式減速機 Low Backlash Planetary Reducer

50

20

200

150

750W

200

Ø 150

200

500x550x800

100

Single, 220V 15A

600 600 600

300 300/600 300/600

小於

採USB傳輸模式，適用各種Win XP/7/10的電腦系統

免費提供升級版本，達到穩定且功能完整之操作軟體

人性化界面，可依使用習慣調整介面位置與相關顏色

語言資料庫系統，可中、英文切換或自行修改資料庫，滿足不同國家語言

內建多種材料試驗方法與可程式編輯功能，滿足各種國際規範需求

含平均值、標準差等統計與SPC分析功能，並繪製柱狀圖、動態管制圖

曲線X、Y軸數據可依不同需求設定，並可多條曲線同步顯示比較

內建各種數據分析公式，符合金屬、塑膠、紡織等試驗需求

USB transmission mode and compatible with Window XP/7/10

Free supply upgraded version to stabilize software’s functions

Friendly interface to adjust colors and positions

Chinese and English switchable, database for other languages

Satisfy Standards for multiple testing methods of materials

Draw charts including multiple analysis like AVG., S.D., and SPC…etc.

X/Y axis for demands, multiple curves to compare simultaneously

Built-in multiple analysis formulas to satisfy different demands

容量2,000 / 5,000 kgf，測試空間：100x100x90 /120x120x100 cm滿足ISO 12048, ISO 2872, ASTM D4169等紙箱抗壓規範強化結構壓盤組，上壓盤具活動接頭，自動調整角度，達到準確量測

伺服馬達搭配強鍵的控制系統，穩定控制機台運動，提升量測穩定性

簡易的單機操控介面，操作靈活；選購軟體系統，達到多功能試驗

Capacity: 2,000/5,000 kgf; testing space: 100x100x90/120x120x100 cmSatisfy ISO 12048, ISO 2872, ASTM D4169 StandardsStrengthened structure compression platens for accuracyServo motor with robust controlling system for the stabilitySimple standalone interface; optional software for multiple tests

搭配各式高低溫箱、恆溫恆濕箱，模擬不同環境下之拉伸試驗

溫度範圍：-60~150℃ / RT~1000℃，溼度範圍：10%~98% RH可依實際試片尺寸大小，訂製環境箱容量與試驗機規格

選購帶門精美鋁擠型腳架，箱體可後退，使常溫測試空間更大

不鏽鋼或耐高溫材料夾具延長桿，內含冷卻管路，可接氣冷或水冷散熱

Work with different chambers to simulate various environmentsTemperature: -60~150℃ / RT~1000℃; humidity: 10%~98% RHCapacity and dimension are customized for specimen demandsAluminum-extrusion working structure. Movable chamber for more space to general environment testsExtended rod by stainless or high temp. steel and cooling circuit

最大容量500N，最快速度可達30,000mm/min，滿足高速剝離試驗

獨特試片座設計，可調整測試角度，進行90°、135°或180°剝離力試驗

選購安全防護罩，防止高速操作意外；選購接靜電儀，同步量測靜電

Max. capacity: 500N, speed range up to 30,000mm/min

Adjustable testing angle to process 90°, 135° or 180° peeling tests

Connect to electrostatic instrument as protection device for safety

Profession Technique Service Quality & CreativityOriginal Design & Production: Yang Yi Technology Co., Ltd.

伺服紙箱抗壓試驗機 Servo Carton Compression Tester

環境控制拉伸試驗機 Environmental Tensile Testing Machine

臥式高速剝離力試驗機 Horizontal High Speed Peel Testing Machine

軟體特色∕Software Features

其他應用∕Other Applications

10www.yy-tech.com.tw

扣件試驗 Fastener Test

橡塑膠試驗 Plastic & Rubber Test

黏著力及剝離試驗 Aadhesive & Peeling Test

其他試驗 Other Test 其他配件 Accessories

布料試驗 Clothing Test

彈簧試驗 Spring Test

自攻牙-抗拉Tapping screw- Tensile

橡膠拉伸Rubber Tensile

180°剝離 180° Peel 90°剝離 90° Peel抗拉 (波紋夾具)

Tensile (Wave Grip)氣動夾具

Pneumatic Grips

塑膠拉伸Plastic Tensile

三點抗彎3-Point Bending

拉伸彈簧Pull Spring

壓縮彈簧Compression Spring

自攻牙拔出/拉穿 Withdrawal/Pull through

機械牙抗拉/保重荷重Bolt Tensile/Proof Load

線材拉伸Wire Tensile

織帶抗伸Webbing Tensile

細線、尼龍線抗拉String Tensile

摩擦力Friction

穿刺Puncture

雙軸移動台Biaxial Table


硬度試驗機 Hardness Tester

洛氏硬度試驗機 Rockwell Hardness Tester

維克氏硬度試驗機 Vickers Hardness Tester

自動機型只需單鍵啟動，自動正確地完成洛氏硬度量測

義大利60年歷史，擁有多項創新技術，全機兩年保固

符合ISO 6506/6507/6508、ASTM E18與JIS等規範

採荷重元閉迴路回饋控制系統，荷重穩定(AFFRI專利)

硬度精度小於0.5%或1%，解析可達0.1HRC以上

硬度量測正確性不受震動、水平、溫度、粉塵影響

加載荷重可程式設定，試驗時間解析度可達0.1秒

手動、電動或全自動操作，可測各種洛氏硬度值

機種齊全，從入門款到進階版，滿足客戶需求

運用不同夾持治具，可測試不同表面硬度值

可外接印表機，報表含統計分析系統功能

One button for the entire Rockwell test cycle

60-year experience, 2-year warranty for full series

Satisfy ISO 6506/6507/6508, ASTM E18 and JIS

Loadcell with closed loop feedback (AFFRI patent)

Accuracy better than 0.5 or 1 %, resolution 0.1 HRC

The condition is tolerated in vibration, level…etc

Programmable test load, time resolution 0.1 second

Manual, Semi, and Automatic hardness types

Satisfy the demand from entry to top level

Use various compact test head to test face hardness

Report with statistical analysis system by printer

手動、半自動與全自動機型，滿足維克氏與微小硬度量測

不破壞樣品進行表0.12毫米至2毫米之微小硬度測量

電動轉塔，最大可加裝6組物鏡倍率，並搭配LED光源

手動X-Y工作檯，最小解析10µm，電動則可達0.5µm

全自動機型搭配操作分析軟體，單鍵即可測多條硬化曲線

單鍵操作，自動轉塔、加載、壓痕與卸載，方便操作

可選購多鑲埋塊載物台，提供自動對焦量測系統使用

符合ASTM E384、ISO 6507-2、JIS B 7734等規範

選購相關壓針等、荷重等配件，可量測努氏硬度值

可外接攝影機，搭配自動量測軟體，降低人為誤差

試驗荷重最小為1gf，最大可達30kgf

Manual, Semi, and Automatic for Vickers hardness

Without destroying sample to test 0.12 to 2 mm face

Auto turret to change objectives with LED light

Auto/manual X-Y stage, min resolution 0.5/10µm

One button to test case depth in auto models

Simple operation and easy maintenance

CHD camera with auto measurement software

Satisfy ASTM E384, ISO 6507-2 and JIS B 7734

Choose different accessories to test Knoop hardness

Auto measurement to avoid the artificial deviation

Test Loads can be set from 1gf to 30 kgf

Dacomaster 300

WIKI JSWIKI 30 DM 8 DM 2

250 DRM 206EX 206 RT

14www.yy-tech.com.tw

硬度試驗機 Hardness Tester

可攜式硬度試驗機 Portable Hardness Tester

橡/塑膠硬度試驗機 Hardness Testers for Plastic and Rubber

勃氏硬度試驗機 Brinell Hardness Tester內建刻度尺與光源的手持顯微鏡，可進行簡易量測

自動機型只需單鍵啟動，自動完成勃氏硬度量測

每次量測準確性高且穩定，精度小於0.5%

採荷重元閉迴路回饋系統，荷重穩定(AFFRI專利)

試驗荷重從10到3000kgf，滿足各國規範

Brimatic勃氏硬度量測系統，方便量測硬度大小

整合型機台可透過攝影機，自動對焦分析影像

軟體操作系統，可避免設定錯誤或操作疏失

自動量測，操作容易，只需5秒即可完成整個流程最小量測厚度0.06mm，準確量測薄板或鍍鉻表面安裝於不同試驗台上，滿足不同工件的試驗要求

滿足洛氏、勃氏、努氏、維克氏等硬度量測需求

符合DIN 50157和ASTM B-724等國際規範適合大型或較重工件的硬度量測，方便攜帶

IRHD硬度機自動量測塑膠或合成纖維，適合實驗室符合ASTM 2240、ISO 7619、JIS K7215蕭氏硬度計搭配電動機台，可量測O型環硬度值高精度電子蕭氏硬度計，具計時自動量測功能

高性能R&R，選購硬度測針外罩，5年保固

IRHD can auto test on plastic and synthetic fibersSatisfy ASTM 2240, ISO 7619, JIS K7215Shore tester combine motor table to test O modelHigh accuracy digital Shore hardness tester with timerHigh performance R&R; 5 year warranty

Auto measurement and easy operation in 5 second0.06 mm thin metal and on coating chromium surface Satisfy different measurements on working tableFeasible test for Rockwell, Brinell, Vickers, Knoop Satisfy DIN 50157 and ASTM B-724 standards Convenient to test big or heavy workpiece

Portable microscope with scale and light for measure

One button for the entire Brinell test cycle in auto type

High accuracy for every test, better than 0.5 %

Loadcell and feedback in closed loop(AFFRI patent)

Force range from 10~3000 kgf, complied with standards

Test easily with Brimatic measurement system

Measure through camera and image analysis, auto focus

The software controls the whole instrument

INTEGRAL 1 LD 3000

MKII

IRHD蕭氏測試儀

Electronic Shore電動測試檯

Motorized Bench Stand蕭氏硬度機

Electronic Shore電動測試檯

Motorized Bench Stand

MKII Metaltester RSD MAG EDA 300

MRS JET 3000

BRIMATIC

標準顯微鏡 Standard microscope


膜厚檢測設備 Coating Thickness Tester System

磨耗試驗機 Abrasion Tester

破裂強度試驗機 Bursting Tester

適用PCB、緊固件、塗鍍層等產業膜厚量測

手提式非破壞測量，精度高、穩定性好

具強大的數據統計分析功能

可測量非磁性和磁性底材上塗層的厚度

920系列能測量極薄的浸液鍍層和其它薄鍍層

920系列能測量5層/15種元素的鍍層膜厚

適用橡膠、塑膠、紡織、紙、建材等產業

符合 DIN53516、 ISO-4649、SATRA等規範

符合 ISO 9352、JIS K7204、TAPPI 等規範

砂紙、砂輪、砂條、白棉布、鋼絲絨等耗材

採單晶片與FPGA控制，速度與次數可設定

Apply to PCB, fasteners, and coating thickness industries

Portable non-destructive measurement with good accuracy

With powerful data analysis capabilities

Measure on magnetic and non-magnetic coating thickness

920 series can measure thin coating immersion

920 series measure 5 layer/15 compositions coating thickness

Apply to rubber, plastics, textiles, paper, and other industries

Satisfy DIN53516, ISO-4649, and SATRA standards

Satisfy ISO 9352, JIS K7204, and TAPPI standards

Optional for sandpaper, steel wool, and other consumables

Single-chip and FPGA control, speed and times can be set

符合ISO2759、JIS P8112、ASTM等規範

適合紙板、皮革、布類等的抗破裂強度試驗

試驗速度：高壓170ml/min，低壓95 ml/min

電子式採壓力傳感器搭配LED電子顯示

橡皮膜、甘油、鋁箔片等耗材可選擇

Satisfy ISO2759, JIS P8112, ASTM standards

Apply to Cardboard, leather and other bursting resistant test

Test speed: high pressure 170ml/min, low pressure 95 ml/min

Digital type has pressure sensor with LED display

Optional for rubber membrane, glycerol, other consumables

膜厚計 / 耐磨試驗機 / 破裂強度試驗機

CMI 150/250

DIN磨耗試驗機 / DIN Abrasion Tester

耗材 Consumables 指針式 Indicator 電子式 Digital

Taber磨耗試驗機 / Taber Abrasion Tester表面硬度耗磨機

Surface Hardness Abrasion Tester

CMI 233/243 CMI 730 CMI 920

www.yy-tech.com.tw

萬能衝擊試驗機 Universal Impact Tester

切試片機 Specimen Cutting Tester

熱壓成型機 Specimen Forming Machine

符合 ASTM D256&E23、ISO179&180、EN 10045規範

搭配不同夾具與衝錘，滿足IZOD與CHARPY衝擊試驗

衝擊容量：塑膠1~50J，金屬100~300J

電子式採光學非接觸角度量測，解析0.05°，無磨耗損失

電子式可選擇各式衝擊能量單位，並可輸出至電腦軟體

Satisfy ASTM D256&E23, ISO179&180, EN 10045

Satisfy IZOD and CHARPY impact test

Impact capacity: plastic 1~50J, metal 100~300J

Digital uses optics to measure, resolution is 0.05°

Optional for impact energy units, output computer

衝擊切角機速度30~550rpm/min，切刀形式可選擇

衝擊切角機切槽深度搭配量表可調

金屬切角機可手動製作衝擊試片的V型U型缺口

氣壓式裁切機出力：900/3000kgf，切刀可訂製

硬質切割機適用硬度較高的高分子材料，依模具成形

Speed : 30~550rpm/min, optional for cutter forms

Groove depth with gauges can be adjusted

Manual type can make V/U-shaped by manual

Pneumatic type has 900/3000kgf, customized cutter

For hard specimen apply to high hardness elements

成型壓力：5/10/20/30/50，溫度：常溫~300°C

手動採千斤頂方式，電動採油壓幫浦加壓

升溫快速，節省時間；選購冷卻水路，強制冷卻

上下壓板都具有加熱裝置，附定時器計時

可程式為全自動機型，加熱、成型、冷卻自動完成

Pressure: 5/10/20/30/50, temperature: R°~300°C

Optional for manual and electrical

Quick temperature changes for time saving

Pressing plates equipped with heating device

Auto machine for heating, forming, cooling

衝擊試驗機/試片成型試驗機 Impact Tester/Specimen Forming Machine

機械式塑膠衝擊試驗機Mechanical Impact Tester for Plastic

衝擊試片切角機Angle Cutting Device

手動金屬衝擊試片切角機Manual type for Metal

氣壓式試片裁切機Pneumatic type

硬質試片切割機For Hard Specimen

桌上型手動熱壓成型機Table-top and Manual

手動熱壓成型機Manual

電動熱壓成型機Electrical

可程式熱壓成型機Programmable

電子式塑膠衝擊試驗機Digital Impact Tester for Plastic

金屬衝擊試驗機Impact Tester for Metal

18


其他試驗機 Other Testers

YY-K5B 數位扭力機 YY-K5B Digital Torque Tester10、60、150Nm容量可供指定標準四角接頭輸出、正反轉測試、並可保留最大值

軟體擁有多段校正功能，能夠提高精度值使轉確率達到最好

一機可抵多組扭力扳手且單位切換容易、自動歸零測試

採用高速16Bit類比IC，經過FPGA濾波，達到高效能與高穩定度USB快速輸出、體積輕小、方便攜帶Optional capacities for 10, 60, and 150NmStandard square connector output, reversible testing, retain maximumSoftware provide multi-calibration functions to increase accuracyUnits switch easily and auto-zero testHigh-speed 16 Bit analog IC, through FPGA filter to reach high stabilityUSB transmission, light design, and carry easily

YY-K5C 瓶蓋扭力機 YY-K5C Closure Torque Tester開瓶/鎖緊可同時操作

瓶罐尺寸：20~200mm，測量範圍廣

50組記憶；測試模式：雙向測試

多種顯示畫面CCW/CW/Peak

不鏽鋼與鋁合金固定座，提高壽命與防鏽

應用圓柱型試件測試，如螺絲牙傷、防鬆螺帽鎖扭力、燈泡座旋緊扭力測試

Operating open/closure in test simultaneouslyBottle dimension: 20~200mm, wide testing range50 sets memories; testing mode : bidirectionalMultiple frame demonstrations : CW CCW / PeakStainless steel and aluminum alloy stand to enhance lifetime and antirustApply to cylindrical torque test, such as nut locking torque test…etc.

YM-D01 測厚儀 YM-D01 Thickness Tester採自然重力、提供穩定重力量測厚度

更換不同測頭或重量，可測紙張、橡膠、布類...等精密厚度量測

採RENISHOW光學讀頭，量測行程最大50x0.0001mm

測頭可與主機分離，在使用上可供靈活操作

Work with nature gravity, provide a stable weight to test thickness

Apply to paper, rubber, and other precision thickness measurement

RENISHOW Linear Gauge, Max. stroke 50x0.0001mm

Measure head and mainframe can be separated for flexible operation

YT-U04 量錶訊號轉換盒 YT-U04 Digital Multiplexer4支數位量錶與4組腳踏開關可同時操作，節省時間

USB隨插即用；體積輕巧，價格合宜；簡易操作好上手

相容於32-bits/64-bits；Win XP/7/10電腦系統

中英文可切換；預留新增語言；統計分析、列印功能

記錄資料可匯出EXCEL；單位mm / in 可切換

Operate simultaneously with 4 gauges & 4 foot switches

USB connection; light design and reasonable price, easy operation

Compatible with 32-bits/64-bits; Win XP/7/10

Multi-languages switch; statistics analysis, print functions

Data export to EXCEL; units switchable for mm / in

www.yy-tech.com.tw


20

YM-A03牙刷清潔度試驗機YM-A03 Toothbrush Cleaning Ability Machine模擬刷牙時刷毛清除牙垢的清潔能力

藉由不同荷重加壓於牙刷頭上，觀察牙模上的染色劑去除程度

最大4組牙模同步測試。並可獨立控制噴水裝置

基本荷重：400g，另可依須求增加砝碼

速度：10~100次/分鐘，次數可設定 0~9,999,999

Simulate the cleaning ability for toothbrush while brushing

Different loads compressed onto the machine to observe

4 sets of tooth mold test simultaneously; independent water devices

Basic load: 400g, additional weights upon request

Speed: 10~100 times/min., times: 0~9,999,999

牙刷毛束硬度試驗機

Resistance of Tufted Portion to Deflection for Toothbrush

依據ISO 22254設計，採伺服馬達與荷重元量測牙刷乾溼硬度

模擬多次來回刷牙動作時，量測刷毛對牙模產生的阻力，判斷刷毛硬度

試驗速度與次數可設定，搭配分析軟體，繪製力量曲線圖

試驗牙刷採自然重力，重量可調；夾具採不鏽鋼設計，防止生鏽

Designed by ISO 22254, works with servo motor and load for test

Simulate multi cycles of brush to judge the tuft hardness

Speed and times can be set with software and strength graph

Weight adjustable by gravity; grips are made of stainless steel

水泥螺絲拔出試驗機 Cement Screw Pull-Out Tester專用於水泥螺絲鎖入水泥中，測試拔出拉力試驗

攜帶式設計，並輔以手動泵浦操作。操作簡單

搭配YY-K5A顯示器，可顯示螺絲拔出最大力量

可選購位移感測器，同步顯示螺絲拔出位置及對應的力量

Cement screw fasten into cement for pull-out test

Portable design with manual pump, simple operation

Use YY-K5A multi-function Indicator to show max. pull-out strength

Optional displacement loadcell display pull-out position and strength

焊接強度試驗機 Welding Strength Testing Machine對焊接件施一側向力，並於指定的彎折角度下，觀察焊接處變化

可選購荷重感測器，量測彎折過程中的力量變化

Lateral force onto the welding specimen with certain bending angle

Optional loadcell to measure the strength differences while bending



鋰電池高低溫試驗機

High Low Temp Material Testing Machine for Lithium Battery

專為鋰電池BNC(Blunt Nail Crush test)而設計，符合UL1642規範

適用18650系列Cylindrical、稜形(方形)Prismatic、聚合物Polymer

藉由四組熱電偶的連接，觀察穿刺過程電壓與溫度的變化情形

加裝CCD攝影機，可觀察電池膨脹、爆炸情形，提供一系列完善的資訊

Design for lithium battery BNC(Blunt Nail Crush test), UL1642

18650 series Cylindrical, Prismatic, Polymer and other battery tests

4 sets thermocouples connection to observe puncture temperature

CCD camera to observe the ways of the battery inflate and explode

拉伸扭轉壽命試驗機

Torque Tension Testing Machine

除了具有萬能材料試驗機的功能外，還可以同步進行扭轉測試

拉伸、壓縮、正轉、逆轉，皆可獨立控制，也可複合作動

軟體功能可自訂試驗步驟流程，並可多次進行重覆流程中的試驗

可共用萬能材料試驗機夾、治具；快拆式更換設計

Tensile and torque tests simultaneously

Tensile, compression, CW and CCW tests controlled independently

Self-define the test procedure from software; tests are repeatable

Compatible with the grips and fixture of Universal Material Tester

鬆弛試驗機

Relaxation Testing Machine

油封、O型環等密封材等，長期使用下，會逐漸老化，失去密封效果。本議

機，可模擬置於高溫環境下，並施於一定荷重及變形量，於封口處供氣，同

步分析力量、時間、溫度、氣壓變化

一次測試，可設定長達半年或更久。記錄值可自動分割存檔

O ring seal materials will lose its life after using. Simulate the high tempera-ture environment. Apply on a certain force and deformation to analyze variety of strength, time, temperature, and pressure

One test reaches last 6 months; records are automatically saved.

YM-P01旋轉阻力試驗機 Idler Roller Testing Machine

用於滾輪、滾筒等圓形無動力滾動零件的測試。分析滾動零件本

身轉動時的摩擦阻力，也可以測試滾動零件的真圓度

Apply rolling test to roller, cylinder and circular components. Analyze the fricative resistance and true roundness

www.yy-tech.com.tw

YM-V Series光學影像量測系統 Optical Image Measurement System

22

量測時間快速

人為誤差少

測得數據可紀錄

簡易上手

可做報表與Excel輸出

Quick measurement

Less deviation

Recordable data

Easy operation

Table and Excel output

X-Y軸移動範圍(mm)：X=200 Y=100/ X=300 Y=150

線性精度：U1=3+( 6L /1000)µm, U2=4+( 6L /1000)µm

主軸及基座以天然花崗石原石製成，高穩定度及高精度

結構的平面精度、垂直度皆符合DIN00級要求

其高精度X-Y工作台及Z軸高精度線性滑軌皆直接固定在花崗石

高精度及高剛性的結合，產生高精度壽命的量測設備

X-Y axis range (mm): X=200 Y=100/ X=300 Y=150, optional

Linear accuracy: U1=3+( 6L /1000)µm, U2=4+( 6L /1000)µm

Main shaft and base are made of granite, machining and manual grinding

Both structure of horizontal and vertical accuracy apply to DIN00 level

Accurate X-Y stage and linear bearing on Z axis fixed on the granite

Accuracy and rigidity to produce high-precision measurement equipment

各國語言可切換中文、英文、日文、韓文

基本幾何量測功能、元素組合計算、形狀公差計算、姿勢及位置公差計算

有效數據搭配各單位輸出項目以及語文選項，可直接由狀態列變更

Switchable language for Chinese, English, Japanese and KoreanBasic geometric measurement, form tolerance calculation, location, and orientation tolerance calculationData output by projects and language options, can be modified by database directly

YM-V系列自動光學影像量測系統 Automatic Optical Image Measurement System

2.5D 影像測量儀 Image Measurement System

2.5D 影像檢測軟體介面 Image Measurement System Software

型式Type

量測範圍Range (mm)

景深Depth of Field (mm)

鏡頭Lens

光源型式Light Type

光源調整Light Adjust

CCD攝影機CCD Camera

可調行程Adjustable stroke

精度Accuracy

解析度Resolution

重複性Repeatability

機台重量Weight

電源Power Supply

設定模式Mode

手動量測Manual Measure

作業系統System

移動平台Move Table

單鍵量測Single Button

多國語言Languages

立式/臥式Vertical / Horizontal

60X40

18

雙遠心Telecentric lens

平行光Parallel

數位可調Digital

黑白(B&W)5M pixels

±25µm

±7µm

1µm

5µm

235 x 400 x700

30kgf

AC 100~240V

DXF/影像設定

32/64 bit

選購Optional

機台尺寸(LxWxD)Dimension (mm)

規格∕Specification

特色∕Features

105_P01-02105_P03-04105_P05-06105_P07-08105_P09-10105_P11-12105_P13-14105_P15-16105_P17-18105_P19-20105_P21-22

profession, technique, service, quality and creativity are...

Documents