proper testing in salt water pools
DESCRIPTION
ITS President Ivars Jaunakais informative presentation at the 2013 Pool Industry Expo Held September 26th - 28th in Monterey, California.TRANSCRIPT
![Page 1: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/1.jpg)
Proper Testing Procedures Proper Testing Procedures in in
Salt Water PoolsSalt Water Pools(The Importance of Accurate Results)
Proper Testing Procedures Proper Testing Procedures in in
Salt Water PoolsSalt Water Pools(The Importance of Accurate Results)
By Ivars Jaunakais
Thursday September 26, 20131:00 PM -1:45 PM / 2 CE Credit Hours
![Page 2: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/2.jpg)
• History and benefits of salt pools• The importance of balanced water• Different and proper water testing methods and techniques• What salt pool tests need to be done• How to easily verify that you, the test method, and reagent is
giving you correct answers
TOPICS
![Page 3: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/3.jpg)
SALT POOL HISTORY
• Developed in Australia back in 1965• 80% of all Australian pools use salt• Introduced in USA in 1980• Popularity in USA finally caught on in
the last 10 years as technology improved
![Page 4: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/4.jpg)
HISTORY
• In 2007 nearly 75% of American new pool installations were salt pools
• An increase of 15% from 2002• Currently over 1.6 million pools in the United
States use salt
![Page 5: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/5.jpg)
BENEFITS
• Water is gentler on skin, eyes, nose and hair• Simple and convenient maintenance • Environmentally friendlier (less chemicals?)• Less expensive to operate in the long run• Less prone to algae problems
![Page 6: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/6.jpg)
• Adequate generation of Chlorine by Salt System
• Regular testing of pool water• Weekly Cleaning and
Maintenance• Adequate circulation time• Quality filtration• Know what’s in the make-up
water to anticipate problems
MAINTAINING A SALT POOL
![Page 7: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/7.jpg)
• Proper maintenance of salt pools begins with water testing
• Primarily for the safety of bathers• Avoids Liability issues • Accurate and routine testing results in less
problems• Testing is required to keep salt pools
balanced • Chlorine testing is required to know if Salt
System is adjusted properly
TESTING IS VITAL
![Page 8: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/8.jpg)
• Weekly testing of pH and chlorine• Monthly testing during the season
for total alkalinity, calcium
hardness, metals, and cyanuric acid
• Monthly testing of salt levels need to match the proper level as specified by the chlorine generator manufacturer
TESTING IS VITAL
![Page 9: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/9.jpg)
• Happy customers • Accurate test results
support correct maintenance, saving you and your customers money
• Increased business
SERVICE GOALS
![Page 10: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/10.jpg)
• pH levels rise due to constant electrolysis (if problem continues consider Borate Buffer option)
• Requires more muriatic acid to keep pH OK• This lowers total alkalinity levels• Monitor Cyanuric Acid levels • Monitor Salt levels• Corrosion of metal parts• Higher electricity use
SALT POOL ISSUES
![Page 11: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/11.jpg)
• Pool salt levels • Stabilizer levels• Control box settings• Pool circulation time
settings
COMMON ISSUES
![Page 12: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/12.jpg)
• Poolside testing often performed in undesirable environmental conditions
• Temperature, humidity, sunlight, wind, and rain affect results
• Distractions including poolside activity and noise
POOLSIDE TESTING CHALLENGES
![Page 13: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/13.jpg)
• Cost per test (varies $0.02 to $0.30 up to $10)• Time to run test (time = money)• Ease of use• Portability and stability of tests• Compliance testing requirements if testing
public or commercial pools and spas (meets State Health Department approval)
• Test gives good results with a test Standard
TESTING CONSIDERATIONS
![Page 14: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/14.jpg)
• Be acceptable or compliant (i.e., Chlorine test uses DPD indicator)
• Use tests that don’t challenge your patience• Not be technically difficult• Use reagents and equipment that are safe,
reliable, and stable• Have good resolution (so precision is reliable)• Be accurate (answer is correct)
TESTING SHOULD…
![Page 15: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/15.jpg)
• Colorimeters (Photometers) and reagents
• Titration or drop reagents
• Comparator test• Test Strips
COMMON TESTING TOOLS
![Page 16: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/16.jpg)
Four colorimetric methods:1) Digital Photometer – uses different reagents
(liquid, powder, tablet, or reagent strip)
2) Colorimetric titration - counting drops and matching color using liquid and powder reagents
3) Comparator color test – uses liquid, powder, tablet, or reagent strip with a test tube or comparator color chart scale
4) Test strips - visual matching to a color chart scale
COLORIMETIC TESTS
![Page 17: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/17.jpg)
• Uses colorimetric or precipitation chemistries and the color (or precipitate) is measured by a digital instrument that measures light transmission through sample
• Concentration is determined by the amount of light that is transmitted through the reacted pool water sample
• Chlorine has 0.01PPM resolution; 0.03 PPM accuracy• Hardness has 1PPM resolution; 10 to 20 PPM accuracy
TESTING TOOL #1Photometer and Reagent
(Most accurate method)
![Page 18: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/18.jpg)
RESOLUTION EFFECTS ACCURACY!
Resolution 1 ppm Resolution 0.1 ppm
![Page 19: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/19.jpg)
• Colorimetric chemistry that uses visual color change for testing concentration
• End point color change can be difficult to gage • Accurate counting of drops is required• Test is dependent on technique
(swirling is required )• Math required (drops are multiplied by
concentration factor) • Chlorine has 0.2 PPM (or 0.5PPM) resolution and
expect 0.6PPM (or 1.5PPM) accuracy• Hardness has 20PPM resolution; 60 PPM
accuracy
TESTING TOOL #2 Colorimetric (visual) titration
Commonly used FAS/DPD method
![Page 20: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/20.jpg)
• Fast and inexpensive
• Minimum resolution & accuracy
• Liquid reagents have stability issues
• Requires good visual judgment
• Chlorine has 1PPM resolution and 3 PPM accuracy at lower levels
• pH has 0.3 resolution; 0.5 accuracy
TESTING TOOL #3 COLOR COMPARATOR
![Page 21: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/21.jpg)
• Fast and inexpensive
• Suitable for screening
• Good shelf life
• pH resolution is 0.3 and accuracy is 0.5
• Chlorine resolution is 1 PPM or greater and accuracy is 3 PPM
• Available for most parameters
TESTING TOOL #4 Test strips
![Page 22: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/22.jpg)
COLOR BLINDNESS
Over 32 million Americans (8% of men) are color blind
![Page 23: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/23.jpg)
COLOR BLINDNESS
![Page 24: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/24.jpg)
TESTING BEST PRACTICES
![Page 25: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/25.jpg)
• Circulate pool water before collecting sample, or manually stir water in sample area
• Rinse sample cell/vial two or three times with pool water before sampling
• Sample water 18 inches below surface (most important for Chlorine, Bromine, and Cyanuric Acid testing)
TESTING Best Practices
![Page 26: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/26.jpg)
• Do not collect water sample near return lines
• Note the temperature of water to be tested (Very cold or very hot water can effect test results)
• Read test instructions for procedure how to run test with very cold or very hot water
TESTING Best Practices
![Page 27: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/27.jpg)
• Perform tests as soon as possible after collecting sample (immediate testing is required for accurate Free Chlorine results)
• If collecting samples for later testing, handle carefully to avoid contamination, fill bottle to capacity, & seal sample bottle tightly
TESTING Best Practices
![Page 28: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/28.jpg)
• Pay careful attention to expiration dates on reagents and test strips
• Keep reagent containers tightly capped and store in a cool, dark place when posiible.
• Don't swap/mix the caps on reagent bottles to avoid chemical cross contamination
TESTING Best Practices
![Page 29: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/29.jpg)
• Where required, measure volume of water sample to be tested (Measure the bottom of sample meniscus, not the top at fill mark)
• Don't interchange sample vials or cells
• Follow manufacturer’s test directions carefully
TESTING Best Practices
![Page 30: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/30.jpg)
• Add liquid reagents carefully – make sure the correct number of drops are added to sample and drops are equal and full-sized
• Mix reagents with test samples thoroughly
TESTING Best Practices
![Page 31: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/31.jpg)
Match visual test results under right conditions:
1.Proper lighting
2.Don’t wear sunglasses
3.Read colors against an appropriate background
4.Don’t match colors in bright sunlight
TESTING Best Practices
![Page 32: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/32.jpg)
• Record results and maintain those records for each pool or spa
• Never dispose of tested samples/reagents in the pool
• Rinse sample test vials and cells immediately after testing
TESTING Best Practices
![Page 33: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/33.jpg)
When using a photometer, verify your results using a Pool Water Standard to verify photometer, reagents, and operator
Pool Water Standards can also be used for verifying titration and comparator reagents
TESTING Best Practices
![Page 34: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/34.jpg)
Average ACCURACY you can expect
![Page 35: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/35.jpg)
IDEAL LEVELS for Salt Pools
CHEMICAL IDEAL LEVELS
Salt 2700 to 3400 ppm
Free Chlorine 1.0 to 3.0 ppm
Cyanuric Acid 60 to 80 ppm
Total Alkalinity 80 to 120 ppm
Calcium Hardness
200 to 400 ppm
Metals (Copper?)
0 ppm
Saturation Index
-0.2 to +0.2 (non-salt pools -0.05 to +0.05)
Nitrates at 0 PPM
![Page 36: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/36.jpg)
BALANCED WATER
• Healthy Water = Balanced Water
• For balanced water 6 parameters to consider and they are used to calculate (Langelier) Saturation Index
1) pH
2) Total Alkalinity
3) Calcium Hardness4) Total Dissolved Solids (TDS)
5) Temperature
6) Cyanuric Acid (CY)
![Page 37: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/37.jpg)
• Balanced Water is water that will neither scale nor corrode pool or spa surfaces and/or equipment
• Corrosion is the dissolving or wearing-away of pool wall, pipes or equipment (SI value below 0.2)
• Scale is the white deposit or precipitate that builds up on fixtures, surfaces, & equipment (SI value above 0.2)
• Balanced water is non-irritating to eyes & skin of bathers, & allows sanitizer to work effectively (SI is perfect when 0 but OK best between -0.2 to +0.2)
BALANCED WATER
![Page 38: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/38.jpg)
BALANCED WATER
Amazon price - $13.89
![Page 39: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/39.jpg)
• Protects bathers health – prevent transmission of infectious disease,
prevent skin irritation, respiratory problems, eye irritation; etc
• Protects Pool or Spa surfaces & Equipment from corrosion and/or
scale-formation, & discoloration
• Minimizes potential Health hazards from disinfection by-products
(combined chlorine is especially a problem for indoor pools/spas)
• Maintains compliance with Health Dept regulations
“Majority of pool problems are caused by poor water quality”
BALANCED WATER
![Page 40: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/40.jpg)
• Chemicals found in make-up water, when treated by the municipal water treatment plant. Including disinfection by-products: lime, alkalis, phosphates and ammonia that forms monochloramines (combined chlorine compounds) in some chlorine treated systems
• Metals in make-up water is frequently found because pipes corrode as water flows through them
• Chemicals used to treat pool water - pH correction chemicals, sanitizers, oxidizers, stabilizer, chemicals for treating algae, mold, etc.
CHEMICAL SOURCES IN POOL WATER
![Page 41: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/41.jpg)
• Bather sweat, urine, dirt, lotions, sunscreen,
cosmetics, soap residues, deodorant, hair spray, etc.
• Environmental items - debris, dirt, leaves ,
vegetation, etc., also contribute chemicals
• Disinfection by-products - trihalomethanes,
haloacetic acids, chlorate, nitrogen trichloride, etc.
• Rain water (can dilute your balanced water)
OTHER THINGS IN POOL WATER
![Page 42: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/42.jpg)
COMMON PARAMETERS
![Page 43: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/43.jpg)
CYANURIC ACID (CY)
• Used since 1956 in outdoor pools to protect chlorine from the Sun’s ultraviolet rays (Degradation)
• CY controls stability of the chlorine in the water but increases the amount of chlorine needed to maintain proper chlorine balance in pools
• CY buffers the pH against downward changes
• Contributes to the overall Alkalinity level
• Very important pool water parameter
![Page 44: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/44.jpg)
CYANURIC ACID (CY) and 10x RULE
Effectiveness of chlorine protection to keep pool clean and algae free is influenced by the CY concentration RATIO to Free Chlorine concentration
• Ratio of 8 to10 times is suggested to be best for clean pools so for convenience I use 10 times (10X RULE)
• When the CY level is 40 PPM then keep Free Chlorine level at 4.0 PPM (10X RULE)
• So if your pool has 100 PPM CY then technically you should have 10 PPM Chlorine (10X RULE)
![Page 45: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/45.jpg)
![Page 46: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/46.jpg)
CYANURIC ACID (CY)
• CY forms weak reversible complex with Free Chlorine• CY does not affect Tests for Free Chlorine (FC)• CY/FC complex is affected by pH and concentration of
FC and CY• CY/FC Complex ties up as much as 95% of the Free
Chlorine. So if your pool water test reads 4.0 PPM FC then your complex free chlorine level is about 0.2 PPM
• As little as 0.01 to 0.05 PPM Free Chlorine is needed to keep pool clean according to CDC and World Health
![Page 47: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/47.jpg)
CYANURIC ACID (CY)
• Effective concentration is 10 times the Free Chlorine concentration (10X RULE)
• Amount recommended to stabilize Free CL 10 ppm CY - 1.0 ppm Free CL 20 ppm CY - 2.0 ppm Free CL
30 ppm CY - 3.0 ppm Free CL 40 ppm CY - 4.0 ppm Free CL
50 ppm CY - 5.0 ppm Free CL
![Page 48: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/48.jpg)
CYANURIC ACID (CY)
• If CY is NOT used in an outdoor pool anticipate 75% Free Chlorine degradation every 60 minutes on a sunny day
• Makes good economic sense to use CY for Free Chlorine protection – less chemicals = less money on Chlorine
• So with a Free Chlorine of 3.0 ppm in the pool then a good level of CY is 20 to 30 ppm
• NEW recommendations by CDC is to limit the CY level to a maximum of 60 PPM
• As CY increases, SI decreases so pool water becomes more corrosive
![Page 49: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/49.jpg)
CY AND TA
• Cyanuric Acid (CY) effects Total Alkalinity (TA) in the pool• CY elevates TA and is influenced by the pH
Examples:
CY of 40PPM with 7.0 pH elevates TA by 8.8 ppm
CY of 40PPM with 8.0 pH elevates TA by 14.4ppm
• So If you keep CY levels at or below 40 ppm the TA effect averages about about 10 ppm and at this point you can ignore CY influence on TA.
• This is one more reason to keep CY below 40 PPM
![Page 50: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/50.jpg)
CYANURIC ACID IN THE U.S.
One study 20 Years ago reported:• Average concentration – 76 ppm
• Maximum concentration – 406 ppm
• Another more recent study reported 25% (122 of 486) of private pools had more than 100 ppm
• CY is allowed for public pools in every State except New York
• CDC recommends CY levels below 60PPM because higher levels have potential PROBLEMS
![Page 51: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/51.jpg)
My CYANURIC ACID (CY) guidelines
• The optimal level for cyanuric acid is 20 - 50 ppm• Levels above 50 ppm reduce chlorine effectiveness• Health Departments will close commercial pools above
100 ppm (Florida recommends 60 ppm) • When using CY maintain Free Chlorine using 10X
RULE • To reduce CY levels, partially drain pool and refill • Test and keep track of CY levels regularly if you use
Dichlor or Trichlor in your service
![Page 52: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/52.jpg)
VARIATIONS IN CY LEVELS
CY levels at the bottom, mid- and surface-levels at the deep end of one Olympic-sized pool with poor water circulation were found to vary:
• Bottom – 100 ppm (12 feet)
• Mid-level – 50 ppm
• Pool surface – 20 ppm
![Page 53: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/53.jpg)
• Photometric (1 ppm)
• Visual black dot comparator (over 20 ppm)
• Test Strip (over 50 ppm)
CYANURIC ACIDTEST METHODS (resolution)
![Page 54: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/54.jpg)
• You need to use Photometric method to get accurate test results for Cyanuric Acid
• Very important when you want to keep CY between 20 - 50 ppm
CYANURIC ACIDTESTING IN THE FUTURE
![Page 55: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/55.jpg)
TOTAL ALKALINITY (AL)
• AL is a measure of how much acid can be added to a liquid without causing a significant change in pH
• AL is the ability of water to resist a change in pH -“Buffering capacity”
• Water with AL of 80 to 120 PPM will resist wide & rapid fluctuations in pH (called pH bounce)
• AL is the bicarbonates, carbonates, & hydroxides in water
• Proper AL stabilizes pH
![Page 56: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/56.jpg)
TOTAL ALKALINITY (AL)
• If AL is low, pH will be affected by anything introduced into the
pool
• If AL is high, pH will be difficult to adjust (water will scale)
• Total Alkalinity is key to pH water balance
• Recommended that it should be adjusted FIRST, before pH
• Addition of acid or alkaline to adjust pool or spa Alkalinity will
change pH, and vice versa
![Page 57: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/57.jpg)
Low Alkalinity (below 80PPM) can cause:• Wide and rapid pH fluctuations
• Corrosion of pool or spa and equipment
• Skin / Eye Irritation
• Cloudy water
• Adding acid like Muriatic Acid will lower pH & Alkalinity
TOTAL ALKALINITY (AL)
![Page 58: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/58.jpg)
• When you add supplemental Chlorine products anticipate their different pHs, and anticipate Alkalinity effect
• Ideal level is 80-100 ppm with CHLORINE sanitizers such as Sodium, Calcium, or Lithium Hypochlorite
• Ideal level is 100-120 ppm with CHLORINE sanitizers such as Dichlor, Trichlor, Bromine, or Chlorine Gas
• Maximum must be below 160 PPM NOTE: Parts per million (ppm) is equivalent to milligrams per liter (mg/L).
TOTAL ALKALINITY (AL)
![Page 59: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/59.jpg)
•Photometric (1 ppm)
•Titration (10 ppm)
•Test Strips (40 ppm)
TOTAL ALKAINITY TEST METHODS (resolution)
![Page 60: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/60.jpg)
ORDER OF pH and AL ADJUSTMENTS
![Page 61: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/61.jpg)
• pH is most important factor• Affects all other chemical / balance parameters• Determines acidity of water • Measured on a scale from 0-14 • pH 7 is neutral• Below 7 is acidic (e.g. lemon juice and coke)• Above 7 is basic or alkaline (e.g. baking soda
and concrete)
pH
![Page 62: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/62.jpg)
• pH in the ideal range will be comfortable for human eye at 7.5
• Pool water pH is acceptable from 7.2 - 7.8
• Ideal pH range is 7.4 - 7.6
• pH levels should be tested DAILY!
• High pH reduces Chlorine’s effectiveness
pH
![Page 63: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/63.jpg)
pH
![Page 64: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/64.jpg)
![Page 65: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/65.jpg)
• pH meter (0.01 or 0.1)
•Photometric (0.1)
• pH comparator (0.2)
•Test Strips (0.2 or 0.3)
pH Testing Methods (resolution)
![Page 66: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/66.jpg)
CALCIUM HARDNESS (CA)
• Defined as the amount of Calcium Salts in water (reported as Calcium Carbonate)
• Term Calcium Hardness used because hardness in tap water is due to Calcium
• Magnesium, barium & sulfate can contribute to Hardness
• Make-up water used to fill pool will vary in its calcium content depending on region of country / city or well water
• Ideal range is 200-400 PPM as CaCO3
• Maximum of 1000 PPM ?
![Page 67: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/67.jpg)
CALCIUM HARDNESS (CA)
![Page 68: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/68.jpg)
CALCIUM HARDNESS (CA)
• CA levels should be tested regularly
• Pool & spa water must have a certain amount of Calcium
• Calcium Hardness, when outside optimal range, can allow corrosion to occur or cause scaling
• Make-up water with high calcium is “hard water”
• Make-up water with low calcium is “soft water”
• Low water hardness allows corrosion or pitting of calcium rich surfaces such as concrete, plaster, & grout
![Page 69: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/69.jpg)
•Photometric (1 PPM)
•Titration (20 PPM)
•Test Strips (over 50 PPM)
CALCIUM HARDNESSTEST METHODS (resolution)
![Page 70: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/70.jpg)
TOTAL DISSOLVED SOLIDS(TDS)
• TDS is the total of all dissolved material in water
• TDS value is contributed and influenced by ions of
calcium, magnesium, sulfate, chloride, sodium,
potassium, phosphate, nitrate, all ions; Alkalinity;
Cyanuric Acid; and other chemicals present in water
• If it is dissolved in the water, it is part of TDS
![Page 71: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/71.jpg)
TOTAL DISSOLVED SOLIDS(TDS)
![Page 72: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/72.jpg)
TOTAL DISSOLVED SOLIDS(TDS)
High TDS levels ( over 1500 PPM) increase these undesirable events:
• Increases algae growth despite adequate sanitizer
• Corrosion despite water being otherwise balanced
• Cloudy water despite adequate filtration
• Eye and skin irritation
• Deposits on pool wall
• Salt pool TDS just add salt concentration: so 3500 PPM Sodium Chloride will add about 3500TDS
![Page 73: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/73.jpg)
TOTAL DISSOLVED SOLIDSin Salt Pools
• TDS will increase in a salt pool over time
• Why? - chemicals are added, dirt and debris blow or wash
• water evaporation from pool
• If TDS exceeds 1500 ppm of initial level (like 5000PPM) monitor TDS, clarity, and SI
• TDS at even 8000 ppm can work but requires effort to keep track of SI
![Page 74: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/74.jpg)
TESTING TDS
• TDS levels should be tested MONTHLY using 1. Digital Conductivity meter ($20 - $900)
(can do thousands of tests)
2. Test strips ($0.30 to $0.50 per test)
• Maximum TDS is 1500 ppm over start-up TDS• Some professionals find 5000 ppm TDS levels in pool water
acceptable
![Page 75: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/75.jpg)
TEMPERATURE
• Temperature is a water balance factor but difficult to control
• Pool water is normally 78 - 82◦ F. • Spa water is normally 96 - 104◦ F• Test with digital or IR thermometer
![Page 76: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/76.jpg)
• If pH goes up then Calcium Hardness and Alkalinity has to be kept at lower end (200 for CA & 80 for AL)
• Danger signs – pH above 7.8 and TA above 120
SI and RELATIONSHIP OF BALANCED WATER
![Page 77: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/77.jpg)
SI (LSI)
![Page 78: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/78.jpg)
SANITIZER AND DISINFECTANTS
• A disinfectant kills disease-causing organisms
• A sanitizer kills all microorganisms with impunity, (USEPA 99.9% effective) i.e. , chlorine
• Oxidation refers to the “chemical reaction” that organic contaminants or waste products undergo
• The pool environment is constantly exposed to new contaminants, two important considerations:
1. Sanitize water to kill microorganisms
2. Oxidize organic contaminants
![Page 79: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/79.jpg)
CHLORINE
• Chlorine is the most popular worldwide sanitizer, disinfectant,
algae killer and oxidizer
• Chlorine is inexpensive, safe when used properly effective
• Chlorine doubles as a sanitizer and oxidizer in a pool or a spa
• Chlorine is most effective under certain conditions –
The pH is most important factor and must be in optimal range
for chlorine to be effective
![Page 80: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/80.jpg)
CHLORINE
• Effective against a broad range of microorganisms • Over 79,000 tons are used in the United States and
Canada to treat water yearly• Monitoring chlorine concentrations is very important • Used in pools to protect bathers health, water clarity and
equipment• Inactivation of pathogens depends on contact time• In the United States, Health Departments require
all public pools to be routinely tested for chlorine
![Page 81: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/81.jpg)
GERM INACTIVATION TIME IN 1 ppm CHLORINATED WATER
GERM INACTIVATION TIME
E. Coli O157:H7Bacterium
Less than 1 minute
Hepatitis AVirus
About 16 minutes
GiardiaParasite
About 45 minutes
CryptosporidiumParasite
About 15300 minutes(10.6 days)
pH 7.5, 77 F
![Page 82: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/82.jpg)
CHLORINE SOURCESS Salt Systems generate HOCl -------or NaOCl equivalent
ChemicalName
ChemicalFormula
Form % Chlorine
Chlorine Gas
Cl2 Gas 100%
CalciumHypochlorite
Ca(OCl)2 Solid 65-70%
SodiumHypochlorite
NaOCl Liquid ~12%
![Page 83: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/83.jpg)
ABOUT CHLORINE SOURCES
Despite their chemical and physical differences, they form hypochlorous acid, or as more commonly known in the pool industry - Chlorine
This change occurs when added to water Hypochlorous acid (HOCl) is the effective
disinfecting agent
![Page 84: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/84.jpg)
CHLORINE CHEMSTRY
• The sum of Hypochlorous acid (HOCI) and Hypochlorite ion (OCI ¯) is called free chlorine, and the chemical equation or relationship is:
![Page 85: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/85.jpg)
HYPOCHLOROUS ACID REACTIONS
• Two chemical reactions impact the performance
of Hypochlorous acid as a disinfectant:
• FIRST REACTION involves a hydroxide ion (OH¯)
• OH¯ is available in aqueous solution especially
when pH level is above 7 which causes
Hypochlorous acid to form Hypochlorite ion
![Page 86: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/86.jpg)
HYPOCHLOROUS ACID REACTIONS
• Hypochlorite ion is less than one third as effective as a disinfectant as Hypochlorous acid
• The next slide shows the relationship between pH versus chlorine species (Hypochlorous acid and Hypochlorite ion)
![Page 87: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/87.jpg)
pH VERSUS CHLORINE SPECIES
![Page 88: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/88.jpg)
CHLORINE REACTION
• The SECOND REACTION is a series of chlorine reactions that occur with ammonia (NH3) and organic nitrogen compounds like proteins and amino acids in the pool to form chloramines
• Chloramines are less effective disinfectants
• Active chlorine can be transferred from inorganic chloramine to amine (organic) containing compounds
![Page 89: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/89.jpg)
BREAKPOINT CHLORINATION
89
• The process which eliminates both the combined chlorine and the ammonia problem responsible for creating the chloramine is called Breakpoint Chlorination
• In the pool industry its called “Shock” or “Super-Chlorination”
• Shock is required less frequently in Salt pools and depends on a variety of considerations
![Page 90: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/90.jpg)
TOTAL CHLORINE
• Total chlorine is the sum of free chlorine and combined chlorine
• Free chlorine and total chlorine can be monitored by automated equipment and confirmed by poolside testing for swimmer protection
Total Chlorine = Free Chlorine + Combined Chlorine
![Page 91: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/91.jpg)
• DPD methods have become preferred for chlorine measurement
• DPD methods determine concentration by measuring intensity of color formed when chlorine reacts with DPD
• DPD-FAS Titration method determines chlorine by measuring amount of FAS Titrant needed to bleach out DPD-chlorine color formed
• State health departments accept DPD tests because they are quick, enjoy wide acceptance & EPA approved
DPD CHLORINE TESTING
![Page 92: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/92.jpg)
• DPD Photometric Digital Meter (0.01)
• DPD-FAS Titrimetric (0.2)
• DPD Colorimetric Comparator (1 or 2)
• TMB Test Strip (0.2 but only detects free chlorine)
EPA ACCEPTEDCHLORINE TEST METHODS(FREE AND TOTAL)
![Page 93: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/93.jpg)
• Combined chlorine = TC - FC
• Free chlorine = 1.58 ppm (FC)
• Total chlorine = 1.89 ppm (TC)
• Combined chlorine = 1.89 – 1.58 = 0.31 ppm
Combined chlorine is above the recommend level of 0.20 ppm and suggests pool needs to be shocked: in this example ( 10 X 0.31 = 3.1 ) this pool can be shocked by increasing the pool chlorine level by 3.1 ppm
TOTAL CHLORINE (TC) = FREE CHLORINE (FC) + COMBINED
CHLORINE
![Page 94: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/94.jpg)
OTHER COMMON WATER QUALITY
PARAMETERS AND TREATMENT SOLUTIONS
![Page 95: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/95.jpg)
OZONE GENERATION
• Ozone is negatively-charged oxygen atoms • Occurs naturally in the atmosphere, through the action of lightning• Non-toxic• Useful water purifier, used for decades in municipal water systems• Reduces the amount of chemicals needed to combat algae and
bacteria• Ozone has no effect on the pH balance, alkalinity or TDS of the pool
water, but it does NOT eliminate the use of chlorine• Breaks down immediately on contact with water-borne contaminants,
but does not combat algae formation on pool and spa walls
![Page 96: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/96.jpg)
OZONE
• Can reduce the use of biocides and algaecides in a pool, it is not a complete solution
• Ozone generation involves the use of an ultraviolet (UV) or Corona Discharge (CD) unit which converts Oxygen (O2) to Ozone (O3)
• Advantages:
• Reduces the use of sanitizing chemicals
• No effect on water balance
• Disadvantages:
• Ineffective against algae
• High installation expense
![Page 97: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/97.jpg)
PHOSPHATE
• Phosphorus is 0.12% of the earth’s crust
• Human bones and teeth contain calcium phosphate
• Muscle, nerves and brains of animals, contain complex organic compounds of phosphorus, which are formed from vegetable matter
• Red phosphorus is used for pyrotechnics and for the manufacture of safety matches and fertilizers
• Phosphate is an essential nutrient for algae growth
• Phosphate Testing is challenging below 0.2PPM (200ppb)
![Page 98: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/98.jpg)
HOW PHOSPHATE GETS IN WATER
• Runoff from lawns • Rain water • Bathers
(sweat and urine)• Pool treatment chemicals• Leaves and debris
that is blown in
![Page 99: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/99.jpg)
CONTROL ALGAE BY CONTROLLING PHOSPHATE
• Pool water will be regularly refreshed with City make-up water that may contain 1PPM phosphate
• Increase swimming pool chlorine level if phosphate is present.
• “Flock” the phosphate with a phosphate flock salt and vacuum.
• Rain water is usually OK
![Page 100: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/100.jpg)
SALTS THAT REMOVE PHOSPHATES
• Iron salts (undesirable in pools)Used by municipal water and wastewater plants.Very effective in removing phosphate.
HPO4-2 + Fe+3 FePO4↓ + H+
• Aluminum salts (inexpensive)Effective for levels above 1000 ppb.Does not remove phosphate below 100ppb.
HPO4-2 + Al+3 AlPO4↓ + H+
• Lanthanum salts (expensive)Effective for maintaining low levels of phosphate.Easier to use and apply than Aluminum salts.Can drop phosphate levels below 100 ppb.
HPO4-2 + La+3 LaPO4↓ + H+
![Page 101: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/101.jpg)
LATHANUM SALTS(chloride and sulfate)
• Form a water insoluble Lanthanum Phosphate precipitate• Easily removed by the pool filter media• In high concentrations, salts will not cause cloudy water or
staining of the pool
![Page 102: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/102.jpg)
KEEP Salt POOLS PHOSPHATE FREE
• Test the water phosphate levels regularly• Avoid lawn/garden run-off from entering the pool• Remove leaves promptly • Keep phosphate below 120 ppb (0.12PPM)• Test the make-up water for phosphate (City water may
have as much as 1 PPM or 1000PPB phosphates)• Preferred photometric test uses molybdate reaction with
phosphate in mild acid solution to form molybdophosphoric acid or heteropoly blue complex
![Page 103: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/103.jpg)
PHOSPHATE TESTING(resolution)
• Digital Photometric with reagent 0.01 PPM (or 10 PPB) resolution
• Test Strip with Comparator 0.1 PPM (or 100 PPB) resolution
• Ideally keep level below 0.1PPM or 100 PPB• If Chlorine is maintained above 4PPM and CY below
60PPM pool can tolerate 0.5PPM (500PPM) phosphate without algae problem.
![Page 104: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/104.jpg)
SALT
• Salt in pool water also called salt chlorination
• Dissolved salt (1,800–6,000 ppm) is needed for the chlorination system
• The chlorinator uses electrolysis to break down the salt (NaCl +H2O = NaOH + HOCl).
• The resulting chemical reaction eventually produces Sodium HypoChlorite equivalent or NaOCl
• Saltwater pool utilizes a chlorine generator instead of direct addition of chlorine.
![Page 105: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/105.jpg)
COMMERCIAL CHLORINE SALT GENERATOR
• Device that produces chlorine from a mixture of salt and water (brine) through electrolysis
• Chlorine used is produced through the electrolysis of brine
• Electrolysis uses two electrically-charged electrodes:
• Anode (positively-charged)
• Cathode (negatively-charged)
• Electrolyzing salt, the electrodes are contained in different chambers because the result is chlorine gas and caustic soda, also known as lye, which should not be allowed to mix
• The chambers are separated by a special membrane allowing sodium ions and electricity to pass through it, but not chloride ions or water.
![Page 106: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/106.jpg)
SALT
• Anode chamber must periodically be refilled with water and salt
• The caustic soda can be re-used for adjusting the pool's pH balance
• A chlorine generator designed for a 25,000 – 30,000 gallon pool requires 45-50 pounds of salt, which must be replenished 2-4 times per year.
• A similar unit can generate Bromine by using Sodium Bromide instead of Sodium Chloride as a generating source
• Since chlorine and bromine generators produce water sanitizers continuously during operation, it is less necessary for chemicals to be added to the pool or spa water
• Equipment is expensive to buy and install
• In addition to regular testing, chlorine or bromine generators require salt level determination (Chloride or Bromide)
![Page 107: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/107.jpg)
SALT TEST KITS (resolution)
• Photometric with SALT reagent (10 PPM)• TDS meters with Salt Algorithm (10 PPM) can be used but at
least once a year verify salt level with a second method (test strip or photometric)
• Salt Test Strips (500 PPM) and Salt Titrator Strips (100 PPM)• Most Salt System Manufacturers recommend accuracy of
500PPM for you testing
![Page 108: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/108.jpg)
• Another word for cloudiness
• Caused by several factors:
1. Body-waste contamination
2. Non-organic suspended solids
3. Algae
4. Chemical imbalance (high alkalinity, high calcium)
• Turbidity is most commonly measured with a “turbidometric” meter – and is very accurate
• Can be tested with a photometer (less accurate)
TURBIDITY
![Page 109: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/109.jpg)
Using STANDARDS to
Confirm Accuracy of your results
![Page 110: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/110.jpg)
• Standards are used in an analytical chemistry laboratory to verify the accuracy of a test
• Standards are now available for pool service professionals
What is a “STANDARD?”
![Page 111: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/111.jpg)
• To verify the working condition of your
instrument or test method
• To verify your results are accurate
• To ensure correct testing procedure is followed
• To verify reagents are good
Why use a “STANDARD?”
![Page 112: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/112.jpg)
• Food, Medical, and Drinking Water
Agencies (Government regulators and
inspectors) require that your testing
equipment be confirmed by Standards
regularly.
• Liability is a big motivator
Why use a “STANDARD?”
![Page 113: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/113.jpg)
• Ready Snap 1P requires no dilution: just twist open, fill test cell with sample, and run test
• Can be used with most instruments and test methods• Ampoule (10 ml of solution) contains Standard that is used
to verify your pool testing procedure and reagents• Ready Snap 1P are in plastic ampoules and are ideal for
pool service technicians
EXAMPLES OF STANDARDS
![Page 114: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/114.jpg)
•Snap open a Ready Snap 1P Method Verification Standard by twisting the top 180°
Using READY SNAP with TITRATION STEP 1
![Page 115: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/115.jpg)
• Squeeze plastic ampoule
to fill CELL to capacity
Using READY SNAP With TITRATION STEP 2
![Page 116: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/116.jpg)
Add test tube sample to test bottle
Add colorimetric reagent (powder) to test bottle
Color will change from clear to red due to the presence of Calcium Hardness
Using READY SNAP With TITRATION STEPS 3 & 4
![Page 117: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/117.jpg)
• Start titration: add drop by drop (count drops) Titration Reagent to test bottle and mix between each drop. Observe color
• Observe when color changes to PURPLE this indicates titration is near completion
Using READY SNAP With TITRATION STEPS 5 & 6
![Page 118: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/118.jpg)
• BLUE color indicates end point (8 drops used)
• Multiple 8 X 20 equals 160PPM Total Hardness
• According to chart, this is borderline value
• Typical for titration accuracy
Using READY SNAP With TITRATION STEP 7
![Page 119: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/119.jpg)
• Fill test vial with standard
• Dip test strip in standard sample for 5 seconds
Using STANDARDS in a STRIP SCANNER
![Page 120: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/120.jpg)
• Wipe excess liquid with paper towel according to procedure
• Place strip into scanner channel
Using STANDARDS in a STRIP SCANNER
![Page 121: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/121.jpg)
COMPARE RESULTS WITH CHART
![Page 122: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/122.jpg)
• Turn on the Photometer and rinse out three times with clean water
• Break open a Ready Snap by twisting the top 180°
Using READY SNAP With a PHOTOMETER
STEP 1
![Page 123: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/123.jpg)
• Squeeze plastic ampoule to fill photometer CELL to capacity (4mL)
• Discard this liquid sample followed with a quick shake of the meter to empty the CELL of the remaining water drops
Using READY SNAP With a PHOTOMETER
STEP 2
![Page 124: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/124.jpg)
• Select the MENU for the test method procedure you need verified (Calcium Hardness in this example) and run the test method
• Verify the displayed value result against the Solution Value chart (Next Slide)
Using READY SNAP With PHOTOMETER
STEP 3
![Page 125: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/125.jpg)
Run the test method as you do normally using the correct procedure
Compare the displayed value against the assigned value chart provided below and on back
Using READY SNAP With a PHOTOMETER
STEP 4
![Page 126: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/126.jpg)
• If your value is within the acceptable range, you are operating the photometer correctly for this MENU test method
• If your value is borderline, review the manual and the proper procedure
Using READY SNAP With a PHOTOMETER
STEP 5
![Page 127: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/127.jpg)
READY SNAP Standard for TESTING:
![Page 128: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/128.jpg)
• Pride in your work• Customers expect it• Health Departments require
it• Liability issues are bad for
business
STRIVE FOR BEST RESULTS
![Page 129: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/129.jpg)
Questions? Ivars Jaunakais – Chief Analytical Chemist
[email protected] www.sensafe.com
DOWNLOAD THIS PRESENTATION: http://www.slideshare.net/sensafe
![Page 130: Proper Testing in Salt Water Pools](https://reader038.vdocuments.pub/reader038/viewer/2022102922/54b6bd3c4a7959fa048b45d9/html5/thumbnails/130.jpg)
HELPFUL RESOURCES
• Book: Pool Chlorination Facts by Robert W. Lowry
• Book: Intermediate Training Manual Part 1-Chemicals by Robert W. Lowry
• Book: The Ultimate Guide to Pool Maintenance by Terry Tamminen
• Book: The Pool Maintenance Manual by Terry Tamminen
• Internet: Florida Health Dept: http://www.doh.state.fl.us/Environment/water/swim/index.html
• Internet: CDC http://www.cdc.gov/healthyswimming/