pustaka tekn partikel

7/29/2019 PUSTAKA TEKN PARTIKEL

1/9

RUJUKAN

Abrahamsen, A.R. and Geldart, D. 1980. Behaviour of Gas - Fluidized Beds of Fine

Powders Part I Homogenous Expansion.Powder Technology. 26: 35 - 46.

Alien, T. 1981.Particle size Measurement. Ed. Ke-3. London: Chapmen and Hall.

Amen Nordin Darus, 1994. Analisis Dimensi Teori dan Penggunaan. Dewan Bahasadan Pustaka Kementerian Pendidikan Malaysia. Kuala Lumpur, 1994.

Baeyens, J. 1986. Solids Mixing. Dlm. Geldart, D (pnyt.). Gas FluidizationTechnology, hlm. 97- 122. New York: John Wiley & Sons.

Baeyens, J. Geldart, D. & Wu, S.Y. 1992. Elutriation of Fines From gas Fluidized

Beds of Geldart A - type Powders - Effect of Adding Superfines. PowderTechnology. 71: 71 - 80.

Baron, T., Briens, C.L. & Bergougnou, M.A. 1988. Study of The TransportDisengaging Height. Can. J. Chem. Eng. 66 : 749 - 760.

Baron, T., Briens, C.L., Hazlett, J.D., Bergougnou, M.A. & Galter, P. 1992. SizeDistribution of The Particles Entrained From Fluidized Beds: Gas HumidityEffects. Can. J. Chem, Eng. 70: 631 - 635.

Biddulph, M.W. 1979. Mixing ln Water Elutriator. Can. J. Chem. Eng. 57: 268 - 273

Biddulph, M.W. 1983. Separating Efficiency of A Water Elutriator. AIChE J. 29(6):956-961.

Biddulph, M.W. 1984. Water Elutriator in Materials Recycling. Can. J. Chem. Eng.62 : 237 - 362.

Biddulph, M.W. 1986A. Mixing Effects in A Simple Air Classifier. AJChE J. 32(2):317 - 320.

Biddulph. M.W. 1986B. Some Aspects of The Performance of Water elutriators.

Conservation & Recycling. 9(2): 211 - 221.

Biddulph. M.W. 1987. Design of Vertical Air Classifiers for municipal Solid Waste.Can. J. Chem. Eng. 65: 571 - 580.

Biddulph. M.W. & Conner, M.A. 1989. A Method of Companing the Performance ofAir Classifiers.Resource, Conservation and Recycling. 2: 275 : 286.

Biddulph. M.W. Thomas, C.P. & Straker, S.J. 1992. Performance Characteristics ofVertical Straightduct Solids Classifiers. Resource, Conservation and

Recycling. 6: 149 - 158.

Bilbrey, J.H. Jr., Sterner, J.W. & Valderz, E.G. 1978. Recovery from AutomobileShredder Residues.Proc. 1stRecycling world Congress, hlm. 6.

235


2/9

Boettcher, R.A. 1972. Air Classification of Solid Waste. Washington: UE EPA SW-30c.

Briens, C.L., Bergounou, M.A., Inculet, I.I., Baron, T. & Hazlett, J.D. 1992. Size

Distribution of Particles Entrained From Fluidized Beds: Electrostaticeffects.Powder Technology. 70: 57 - 62.

Caram, H.S. edelstein, S. & Levy, E.K. 1984. Particle Ejection Due to BubbleCoalescence Near the Surface of Gas-Fluidized Beds. Proc. Fourth Int. Conf.On Fluidization (disunting oleh Kunii, D. & Teoni, R.), hlm. 265 - 273.

Chen, T.P. & Saxena, S.C. 1978. A Theory of Solids Projection From A Fluidized bedSurface As a Firs Step in the Analysis of Entrainment Processes, Fluidization

Proc. 2nd Fluidization Conf, him. 151 - 156.

Chirone, R., Massimilla, L. & Russo, S. 1992. Bubbling Fluidization of a CohesivePowder in an Acoustic Filed, Dlm. Potter, O.E. & Nicklin, D.J. (pnyt.).

Fluidization VII, hlm. 545. New York: Eng Foundation.

Chitester D.C. & Kornosky, R.M. 1984. Characteristic of Fluidization at HighPressure. Chem. Eng Sci. 39: 253 - 26 1.

Chow, P.S. & Biddulph, M.W. 1997. Separation of Waste of Waste Plastics byEnhanced Elutrition. I. Fundamentals. Kertas kerja atas perhubungan

persendirian. University Nottingham, University Park U.K.

Chrismon, R.L. 1977. Air Classification in Resource Recovering. National Center forRes. Rec. Rm 78-1. Washington.

Clift, R., Grace., & Weber, M.E. 1978. Bubbles, Drops and Particles. New York:Academic Press.

Clift, R. Hydrodynamics of Bubbling Fluidized Beds. 1986. Dim. Geldart, D. (pnyt).Gas Fluidization Technology, hlm. 53 - 96. New York: John Wiley & Sons.

Colakyan, M & Levenspiel, O. 1984. Elutriation From Fluidized Beds. PowderTechnology 38: 223 - 232.

Colakyan, M., Catipovic, N., Jovanovic, G. & Fitzgerald, F. 1981. Elutriation From aLarge Fluidized Bed with and Without Immersed Heat Transfer Tubes.

AlChE Symposium Series, 205(77): 66 - 75.

Collins, R. 1965. An Extension of Davidson's Theory of Bubbles in Fluidized Bed.Chem. Eng. Sci. 20: 747 - 755.

Cranfield, R.R. & Geldart, D. 1974. Large Particle Fluidization. Chem. Eng. Sci. 29:935 - 947.

Darton, R.C., LaNauze, R.D., Davidson, J.F., & Harrison, D. 1977. Bubble GrowthDue To Coalescence in Fluidized Beds. Trans.Instn Chem. Eng. 55~274-280.

236


3/9

Davidson, J.F. & Harrison, D. 1963. Fluidized Particles. New York: CambridgeUniversity Press.

Davidson, J.F. 1961. Symposium on Fluidization - Contribution to Discussion. Trans.

Instn. Chem. Eng. 39: 230.

Davies, C.E. & O'Hagen, T. 1988. The Use of wall Baffles to Increase the SeparationEfficiency of an Air Elutriator. Chemeca '88, Aust. Bicentennial Int.Conference for the Process Industries, hlm. 28. Sydney.

Do, H.T., George, J.R. & Clift, R.C. 1972. Particle Ejection and Entrainment inFluidized Beds.Powder Technology. 6:195.

Fournol, A.B., Bergougnou, M.A. & Baker, C.G.J. 1973. Solids Entrainment in aLarge Gas Fluidized Bed. Can. J. Chem. Eng. 51: 401 - 404.

Geldart, D. 1972. The Effect of Particle Aize and Size Distribution on the Behaviourof Gas - Fluidized Beds.Powder Technology. 6: 201 - 215.

Geldart, D. 1973. Type of Gas Fluidization.Powder Technology. 7: 285 - 292.

Geldart, D. 1981. Behavior of Fine Particles in a Fluidized Bed of Coarse Solids.Electric Power Research Institute, Palo Ito, Laporan akhir EPRI CS2094.

Galdart, D. 1 986A. Single Particle, Fixed and Quiescent Beds. Dlm. Geldart, D(pnyt). Gas Fluidization Technology, hlm 11 - 32. New York: John Wiley &

Sons.

Geldart, D. 1986B. Characterization of Fluidized Powders. Dlm. Geldart, D (pnyt).Gas Fluidization Technology, hlm 33 - 52. New York: John Wiley & Sons.

Geldart, D. 1 986C. Particle Entrainment and Carryover. Dlm. Geldart, D (pnyt). GasFluidization Technology, hlm 123 - 154. New York: John Wiley & Sons.

Geldart, D. & Pope, D. 1983. Interaction of Fine and Coarse Particles in theFreeboard of a Fluidized Bed.Powder Technology. 34: 95 - 97.

Geldart, D. & wong, C.Y. 1985. Entrainment of Particles from Fluidized Beds of FinePowders. Kertas kerja dibentangkan dalam AIChE Annu. Meet. Chicago. 10.November.

Geldart, D. & Wong, C.Y. 1987. Entrainment of Particles from Fluidized Beds of FinePowders.AIChE Symp. Ser. 255(83): 1 - 9.

Geldart, D., Baeyens, J., Pope, D.J. & Vsn de Wijer, P. 1981. Segregation in Beds ofLarge Particles at High Velocities.Powder Technology. 30: 195 - 205.

Geldart, D., Cullinan, J., Georghiades, S., Gilvary, D. & Pope, J. 1979. The Effect of

Fines on Entrainment from Gas Fluidized Beds. Trans. Inst. Chem, Eng. 57:269 - 275.

237


4/9

George, S.E. & Grace, J.R. 1978. Entrainment of Particles from Aggregative

Fluidized Beds.AIChE Symp. Ser. 74: 67 - 74.

George, S.E. & Grace, J.R. 1981. Entrainment of Particles from a Pilot Scale

Fluidized Bed. Can. J. of Chem. Eng. 59: 279 - 284.

Goossens, W.R.A. 1998. Classification of Fluidized Particles by Archimedes Number.

Powder Technology. 98: 48 - 53.

Grace, J.R. 1982. Grid Design. Dlm. Hetsroni, G.(pnyt). Handbook of Multiphase

Systems, Ed. ke 8 - 1. Washington: Hemisphere.

Guedesde Carvalho, J.R.F. 1981. Dense Phase Expansion in Fluidized Beds of FinesParticles. Chem. Eng. Sci. 36: 413 - 416.

Haider, A. & Levenspiel, O. 1989. Drag Coefficient and Terminal Velocity of

Spherical and non Spherical Particles.Powder Technology. 58: 63 - 70.

Horio, M., Shibate, T. & Muchi, I. 1984. Behavior of Entrained Particles in

Freeboard. Proc. 4th Int. Fluidization Conf., 1984. Kashikojima. Japan; New

York: Eng. Foundation, hlm. 307 - 314.

Horio, M. Taki, A., Hsieh, YS. & Muchi, I. 1980. Eiutriation and Particle Transport

Through the Freeboard of Gas Solid Fluidized Bed. Dlm. J.R. Grace and J.M.

Matsen (pnyt).Fluidization, hlm. 57: 127- 133.

Iyer, S.R. & Drzel, L.T. 1989. Behavior of Cohesive Powders in Narrow Diameter

Fluidized Beds.Powder Technology. 57: 127 - 133.

Janssen, L.P.B.M., Marring, E., Hoogerbrugge, J.C. & Hoffmann, A.C. 1998. The

Mechanical Behavior of Vibrated, Aerated Beds of Glass and Starch Powder.

Chem. Eng. Sci. 53(4): 761.

Jensen, J.W., Holman, J.L. & Stephenson, J.B. 1974. Recycling and Disposal of Waste

Plastics. Dlm. Yen, T.F. (pnyt). Recycling and Disposal of Solid Wastes, Ann

Arbor sci. Ann Arbor, Mich.

Kato, K., Tajima, T. & Iwamoto, H. 1985. Dlm. M. Kwauk, D. Kunii, J. Zheng & M.

Hasatani (pnyt). Fluidization 85 -Science and Technology, hlm. 134.

Armsterdam: Elsevier.

King, D.F. & Harison, D. 1982. The Dense Phase of a Fluidized Bed at ElevatedPressures. Trans. Int. Chem. Eng. 60: 26 - 30.

238


5/9

Kunii, D. & Levenspiel, O. 1990. Entrainment of Solid From Fluidized Beds I.Hold - Up of Solids in the Freeboard, II. Operation of Fast Fluidized Beds.

Powder Technology. 61: 193 -206.

Kunii, D. & Levenspiel, O. 1969.Fluidization Technology. New York: John Wiley.

Kunii, D. & Levenspiel, O. 1991. Fluidization Technology. Ed. ke-2. London:Butterworth.

Kunii, D. & Yoshida, K. & Hiraki, I. 1967. The Behavior of Freely BubblingFluidized Beds.Porc. Int. symp. Ser. On Fluidization, hIm. 243.

Langhadr, H. L., 1950. Dimensional Analysis and Theory and Models. New York;Wiley.

Large, J.F. Martini, Y. & Bergougnou, M.A. 1976. Interpretative Model forEntrainment in a Large Gas Fluidized Bed. Int. Powder and Bulk HandlingConf. Chicago.

Leva, M. 1951. Elutriation of Fines from Fluidized Systems Chem. Eng. Prog. 47: 39- 45

Levenspiel, O. 1972. Chemical Reaction Engineering. Ed. ke-2. New York: JohnWiley & Sons.

Levy, E.K., Caram, H.S., Dille, J.C. & Edelstein, S. 19S3. Mechanisms for SolidsEjection from Gas - Fluidized Beds.AIChE. J. 29: 383 - 388.

Lewis, W.K., Gilliland, E.R. & Lang, P.M. 1962. Entrainment from Fluidized Beds .Chem. Eng. Progr. Symp. Ser. 58(38): 65.

Leu, L.P., Li, J.T. & Chen, C.M. 1997. Fluidization of Group B Particles in anAcoustic Filed.Powder Techonology. 94: 23 - 28.

Lin, L., Sears, J.T. and Wen, C.Y 1980. Elutriation and Attrition of Char from a LargeFluidized Bed.Powder Technology. 27: 105 - 115.

Liu, Y., Zhang, J. & Zhang, B. 1998. Separation of a Binary Particle Mixture in aVibrating Fluidized Bed of Dense medium.Powder Technology. 100: 41 - 45.

Ma, X. dan Kato, K. 1998. Effect of Interparticle Adhesion Forces on Elutriation ofFine Powders from a Fluid ized Bed of a Binary Particle Mixture. PowderTechnology. 95: 93 - 101.

Martinie, Y. 1975. Entrainment and De - entrainment Above a Large Gas FluidizedBed. Disertasi M.E. Sc. The University of Western Ontario.

McCabe, W.L. & Smith, J.C: 1976. Unit Operations in Chemical Engineering. Ed. ke-3. New York: McGraw Hill.

239


6/9

Merrick, D. & Highley, J. 1974. Particle Size Reduction and Elutriation in a FluidizedBed Process.AIChE Symp. Ser. 137(70): 366-378.

Midwest Research Inst. 1979. Studying of Processing Equipment for Resource

Recovering Systems, EPA Contract No. 68-03-23 87. Washington.

Molerus, O. 1982. Interpretation of Geldarts Type A, B, C and D Powders by TakingInto Account Interparticle Cohesion Forces.Powder Technology. 33: 81 - 87.

Mori, S., Iwasaki, N., Mizutani, E. & Okada, T. 1992. Vibro - Fluidization of TwoComponet Mixtures of Group C Particles. Dlm. O.E. Potter & D.J. Nicklin(pnyt).Fluidization VII, hlm. 571. New York: Eng. Foundation.

Marooka, S., Kusakabe, K., Atsuo Kobata & Yasuo Kato, J. 1988. fluidization State ofUltrafine Powders. Chem. Eng. Japan. 21(1): 41 - 46.

Morooka, S. Tatsuya Okuba & Katsuki Kusakabe. 1990. Recent work on FluidizedBed Processing of Fine Particles as Advanced Materials. Powder Technology.63: 105.

Nakagawa, N., Arita, S., Uchida, S., Takamura, H., Takarada, T. & Kata, K. 1994.Particle Holdup and Elutriation Rate in the Freeboard of Fluidized Beds.

J. Chem. Eng. Japan. 27(1): 79.

Overchasier, RH., Toed, D.B. & Olney, R.B. 1959. Some Effects of Baffles onFluidized System.A IChE J. 5: 54.

Pacek, A.W. & Nienow, A.W. 1990. Fluidization of Fine and Very Dense HardmetalPowders.Powder Technology. 60: 145 - 158.

Pemberton, S.T. & Davidson, J.F. 1984. Turbulence in the Freeboard of a Gas -Fluidized Bed. Chem. Eng. Sci. 39(5): 829 - 840.

Pemberton, S.T. & Davidson, J.F. 1986. Elutrition from Fluidized Beds - I. Particleejection From The Dense Phase Into The Freeboard. Chem. Eng. Sci. 41(2):243 -251.

Rhodes. M.J. & Geldart, D. 1987. A Model for the Circulating Fluidized Bed. PowderTechnology. 53: 155 - 162.

Rietema, K. 1984. Powders, What Are They?Powder Technology. 37: 5 - 23.

Rowe, P.N. & Partrige, B.A. 1965. An X - Ray Study of Bubbles in Fluidized Beds.Trans. Inst. Chem. Eng. 43: T157.

Rowe, P.N. 1976. Prediction of Bubble size in a Gas Fluidized Bed. Chem. Eng. Sci.31: 285 - 288.

Ryan, W.J. 1970. Chemeca 70, Chem. Eng. Conf Australia: Butterworth.

Saxena, S.C. & Mathur, A. 1984. On the Origin of Solids Projected from the Surface

240


7/9

of a Gas - Fluidized Bed. Chem. Eng. Sci. 39: 917 - 918.

Saxena, S.C. & Vogel, G.J. 1977. The Measurement of Incipient FluidizationVelocities in a Bed of Coarse Dolomite Temperature and Pressure. Trans. Inst.

Chem. Eng. 55: 184.

Sciazko, M., Bandrowski, J. & Raczek, J. 1991. On the Entrainment of Solid ParticlesFrom a Fluidized Bed.Powder Technology. 66:33 - 39.

Shuvalov, V. Yu., Baskakov, A.P. & Berg, B.V. 1976. Investigating the Eruption ofFlux Grain Material from a No~miform Flui4i~ed Hod. Theoretical

Foundation Chem. Eng. 10: 794. Chem Eng. Sci.

Smolders, K. & Baeyens, J. 1997. Elutriation of Fines from Fluidized Beds:Mechanisms of Elutriation and Effect of Freeboard Geometry. Powder

Technology. 92: 35 - 46.

Subbarao, D. 1986. Cluster and Lean Phase Behavior.Powder Technology. 46: 101-107.

Sweeny, P. 1978. Air Classification. Kertas kerja dibentangkan dalam EngineeringFoundation Conf. Rindge, N.H. November.

Taggart, A.F. 1974.Handbook of Mineral Dressing.New York: John wiley & Sons.

Tanaka, L., Shinohara, H., Hirosue, H & Tanaka, Y. 1912. Elutriation of Fines from

Fluidized Bed.J. Chem Eng. Japan. 5(1): 51.

Tanaka, L., Shinohara, H. 1978. Esrimation of Column Height of a Fluidized Bed.Int. Chem. Eng. 18: 276.

Tasirin, S.M. 1995. The Elutriation of Fines From Fluidized Beds . Disertasi Ph.D.University of Bradford.

Tasirin, S.M. & Geldart, D. 1997. Dedusting of Powders Using Elutriation from aFluidized Bed.Powder Handling & Processing. 9(1): 7 - 11.

Tasirin, S.M. & Geldart, D. 1998A. Entrainment of FCC from Fluidized Beds - ANew Correlation for the Elutriation Rate Constant K100*.Powder Technology. 95: 240- 247.

Tasirin, S.M. & Geldart, D. 1998B. The Entrainment of Fines and Superfines fromFluidized Beds.Powder Handling and Processing. 10(3): 263 - 268.

Tasirin, S.M. & Geldart, D. 1998C. Entrainment of Fines from Fluidized Beds Withan Expanded Freeboard, Chem. Eng. Comm. 166: 217 - 230.

Tasirin, S.M. & Geldart, D. 1998D. An Empirical Approach to the Prediction of

Elutriation of Fines From Fluidized Beds at Different Freeboard Levels.Chem. Eng. Comm. 167: 245 - 262.

241


8/9


9/9

Werther, J. 1978. Influence of the Distributor Design on Bubble Characteristics in1ar~e Diameter Gas Fluidized Beds. Dim. Davidson, J.F. & Keairns, D.L.

Fluidization, hIm. 7 - 14. Cambridge University Press.

Widayati, dan Tasirin, S.M., 1999, Kesan halaju permukaan gas, kedalaman lapisan,dan ketinggian sesekat ke atas hasil atas dan hasil bawah turus pengelutlapisan terbendalir, Malaysian Science and Technology Congress, 6 8 Dec.,1999, Johor Bahru.

Widayati dan Tasirin, S.M., 2001.Empirical Correlation for Fluidized Bed Elutriator,Regional Symposium on Chemical Engineering, 29 31 Oktober 2001,Bandung. .

Worrel, W.A. & Vesilind, P.A. 1979. Testing and evaluation of Air ClassifierPerformance.Resource, Conservation and Recycling. 4: 247 - 259.

Yagi, S. & Aochi, T. 1955. Elutriation of Particles from Batch Fluidized Bed. Kertaskerja dibentangkan dalam Spring Meet. Soc. Chem. Eng. Japan. September.

Yates, J.G. 1983. Fundamentals of Fluidized Bed Chemical Processes. London:Butterworth.

Zenz, F.A. & Weil, N.A. 195&. A Theoretical- Empirical Approach to the Mechanismof Particle Entrainment from Fluidized Beds. AIChE. J. 4:472 - 479.

Zhu, Q. & Li, H. 1994. Fluidization of Group C Powder with External Magnetic

Force. Dlm. Organizing Committee of CJF - 5 (pnyt.). Fluidization '94, Sci,and Tech, hlm. 45. Nagoya, Japan.

Zhu, Q. & Li, H. 1996. Study on Magnetic Fluidization of Group C Powders. PowderTechnology. 86: 179 - I85.

243

pustaka tekn partikel

Documents