quick start reference guide

27
Talos DVR Quick Reference Guide 10-2011

Upload: jorge-pinedo

Post on 05-May-2017

221 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Quick Start Reference Guide

Talos DVR

Quick Reference Guide10-2011

Page 2: Quick Start Reference Guide

2

IndexStep 1…Setting up your surveillance system• Designing your surveillance system…3• Installing the hard drive…4• Connecting a monitor…5• Initializing (turning on) your DVR…5• Shutting-down / logging-off / Rebooting the DVR…6• Connecting cameras…7• Installing your surveillance system…8

Step 2…Recording and accessing video on your DVR• Setting date, time and Recording on your DVR…9• Saving video from the DVR…10• Viewing saved video on a PC…11

Step 3…Accessing your DVR from a Local Computer PC• Connecting your DVR to your router…11• Installing DVR Client Software onto your PC…11• Configuring your DVR for local computer access …12,13• Viewing DVR video on local computer…14• Setting up DVR Client software to download and save video…15• Downloading video to local computer…16

Step 4…Access your DVR over the Internet• Signing up for your Domain name… 17• Setting up DVR network settings…18• Configuring the router…19,20• Access DVR over the internet using DVR Client…21• Access DVR over the internet without using DVR Client…21 – 24

Step 5…Using a Smartphone to view your DVR• Download and install the viewer application…25• Phone settings to view your DVR…26• Using the Smartphone app to view your DVR

Page 3: Quick Start Reference Guide

3

Design Your Surveillance System

• Determine the areas that require coverage• A common wide angle lens (≤4mm) on a camera will have an approximate viewing angle of 60°

– Stand at the camera position, look in the direction the camera will aim and cover one eye, this will provide a rough idea of the coverage area

• Order a 4 or 8-channel DVR and the number of cameras depending on your needs• The Talos DVRs store video on SATA hard drives with capacity up to 1TB• The hard drive is user installed• Determine the size of hard drive needed

– 4-channels recording 24/7 will record approximately 5 weeks on a 1TB HDD– 8-channels recording 24/7 will record approximately 3 weeks on a 1TB HDD

Page 4: Quick Start Reference Guide

4

Installing the Hard Drive

• Remove the cover from the DVR• Stick the hard drive isolation pads to the bottom

chassis of the DVR over the four mounting holes• Set the hard drive onto the isolation pads and secure

the hard drive to the DVR chassis with the four included screws

• Connect the SATA data cable to the hard drive• Connect the SATA power cable to the hard drive• Confirm no cables or connectors inside the DVR

came loose during shipping• Replace the DVR cover

Page 5: Quick Start Reference Guide

5

Connecting a Monitor

• You will need a monitor or TV to set up the DVR for use• Connect a monitor to the DVR using the HD15 female output• Or connect the DVR to the composite video input on a TV

– You will need a BNC video cable with a BNC to RCA adapter, available from Parts-Express

Connect a TV here using a BNC to RCA

adaptor

Power

Connect a monitor here using a VGA Cable

USB thumb drive

Cat 5 connection for networking

Connect the mouse here

Turning On DVR

• When the DVR is first initialized you will need to format the hard drive by clicking on the “Yes” tab

• The DVR will display a message on the monitor when hard drive format is complete• The DVR will beep to inform you that no cameras are connected

Connect camera video here

Page 6: Quick Start Reference Guide

6

Shutting Down the DVR

NOTE: Never shut off the DVR using the power switch on the back of the unit. Treat the DVR as a Linux based PC and shut it down properly

• Click the right mouse button to bring up the on-screen menu• Click “Main Menu” and log into the DVR• Click “Exit”• From the drop-down menu click “Shut Down”• The DVR is now properly turned off and can be moved for installation

Default password is 666666 or

888888

Click confirm after entering password

Page 7: Quick Start Reference Guide

7

Testing Your System

• We highly recommend bench testing your system prior to installation

• On a table or bench unpack your DVR, cameras, power supplies, and cables

• As if installing the system, connect each piece to verify all isworking properly

Connecting Cameras

• Pre-assembled cables are available that carry both video and power• Connect a cable to each camera

– DC jack on cable to DC plug from camera– BNC jack on camera to BNC plug from cable

• Connect power cables to power supplies– Power cables can only be installed in one direction, the DC plug to the

camera and the DC jack to the power supply• Turn on the DVR, an image will be visible on any channel with a camera

connected• You have now confirmed that all components of your surveillance system

are functioning• Shut down DVR

Page 8: Quick Start Reference Guide

8

Installing Your System

• Run camera cables– Make sure that pre-assembled camera cables are installed in the

correct direction so the DC plug/jack will mate– Never exert force on the connectors during installation as this may

cause the cables to fail• Mount the cameras and connect video and power• Connect camera cables to DVR• Connect power cables to power supplies• Turn on the DVR

Connect the cameras to the video in inputs

Power Switch

Page 9: Quick Start Reference Guide

9

• Click the right mouse button• Click main menu and log into the DVR• Click on “System Setup”• Click on “System”

Setting the date and time on your DVR• The DVR is factory set to begin recording when powered on

• To set the date and time it will be necessary to stop the recording first

- Click the right mouse button

- Click on “Set Recording”

- Log into DVR

- Click on “STOP – ALL”

- Click “Confirm” and then “Exit”

•Enter correct time and date (Leave “Time Format” as 24 hours)•Click “Set Time” – “Save” – “Exit”•Next screen click “Return”•Now Exit – Confirm Logout•Go back to “Set Recording and click on “Manual – All”•Click “Confirm” and then “Exit”

Page 10: Quick Start Reference Guide

10

Saving Video from the DVR

To retrieve files from the DVR plug a thumb drive into the top USB port on the back of the DVR

•Click the right mouse button and log into the DVR•Click on “Main Menu”•Click “File Backup”•This will take you to the “Backup Search” screen•Click on “ADD”

USB thumb drive

•Enter the search criteria: “Date, Start Time, End Time, Backup Mode, Search Type and Search Channel”•Click “Search”

Click on add

•Click on “Backup”

•Select the files that you want to back up •Click on “Append” then “Exit” (selecting exit will take you back to the backup screen)

•After backup completes click on remove before removing thumb drive•Exit DVR

Page 11: Quick Start Reference Guide

11

View Saved Video on a Computer

Access DVR from a Local Computer

Be sure that your router is communicating with your computer or laptop. If not follow the instructions provided with your router.

Connect the DVR to your router using a standard network cable

•The video saved from the DVR is .lvf format, your DVR includes a CD with a “plug-in” to view video files with Windows Media Player•Load the software from the CD to your computer•Plug the thumb drive into a USB slot and open a video file•You can save the files to a thumb drive or burn to a CD/DVD ROM to archive the files•NOTE: If you get a message stating that the .lvf is not recognized, click “Yes” and the player will play content.

•Load the software from the CD onto your computer or download the Client Software from any Talos DVR web page on the Parts-Express web site•A shortcut named “DVR Client” will be placed on your desktop•NOTE: You may need to download “Winrar” to extract the compressed file

Download “Client Software” program to access DVR from your computer

Page 12: Quick Start Reference Guide

12

Configure DVR to access video on local computer

•When connected to a router the DVR will automatically negotiate an IP address.•So you can find your DVR later, we recommend you assign it an IP address on your network. Simply enter a new number into the last three digits of the IP address and note that address. •Note: To limit potential conflicts with other devices on your network, enter an address higher than what may be assigned by DHCP. Eg.192.168.1.222 or 192.168.0.222

You can check your router’s IP address by :Windows XP-Click “Start” on your computer’s taskbar-Click “Run”, type cmd then click “OK”

• Open “Main Menu” on the DVR, enter your password, click “Confirm” then select “System Setup” then “Network”

Type ipconfig/allLook for Default Gateway

Windows 7-Click “Start” then “Select All Programs”-Click “Accessories” then “Command Prompt”

Page 13: Quick Start Reference Guide

13

Configure DVR to access video on local computer

1. Click the “Auto Assign” radio button to turn off DHCP• The radio button will turn from white to black

2. Enter the new IP address into the field. • Eg.192.168.1.222

3. Enter “7777” into Server Port4. Enter “80” into HTTP PORT5. Click “Save”, then “Confirm” and exit the DVR menus6. Reboot the DVR

NOTE: Never reboot the DVR using the power switch on the back of the unit. Treat the DVR as a Linux based PC and shut it down properly.

• When you exit the “Main Menu” you will see the dialog box to the right• Click the down arrow for the drop down menu• Click “REBOOT SYSTEM”• The DVR will reboot and begin recording

1

2

3 4

5

6

Page 14: Quick Start Reference Guide

14

Viewing DVR from local PC or Laptop

Log Into Your DVR1. Click “By IP address”2. Enter the IP address from the DVR Network

Setup Screen 3. Enter Port 77774. Enter User Name

• The default is “admin”5. Enter Password

• The default is “666666 or 888888”6. Check “Auto-preview…”7. Click “Login”All information will be saved for future login

• Once the video has loaded click on Exit

•Double-click the DVR Client shortcut icon on your desktop

1

2

345

6

7

Page 15: Quick Start Reference Guide

15

Setup DVR Client software to download and save video

1. Create a file folder on your desktop and name it “DVR Files”

• This will make it easier for you to find saved video recordings

2. Click the “Setup” button on the GUI3. Click the “Local Setting” tab in the setting menu4. Change the “Record, Capture and Download

Setting” paths to the file folder on your desktop

E.g.: C:\Documents and Settings\user name\Desktop\DVR Files

5. Click “Save all”, “OK”, then “Exit”

NOTE: the user name in the path above is the user account you log into on your PC. If you do not have multiple user accounts on your PC you will not enter a user name

•Log into your DVR in the same way described on page 14

12

3

4

4

4

5

Page 16: Quick Start Reference Guide

16

Download Video Files to Local Computer

1. Click on “Control”2. Click on the “Download” tab in the “Status

Control” menu3. Select the channel(s), date, and time that you

want to download4. Once the list populates, highlight the file you

want to save (you can save only one at a time)5. Click “Download and Convert” the file will be

saved as an .avi file viewable by Windows Media Player

The file will be saved into the “DVR Files” folder you created on your desktop

1 2

3

4

5

Page 17: Quick Start Reference Guide

17

Access DVR Over the Internet

•Sign up for free Dynamic Domain Name Service at dyn.com•You will create a Domain Name, Account Name, and Account Password, make note of these as you set up your account•Click “Get Started With DNS”•Scroll to the bottom of the screen and click “DynDNS Free”•Click “Get It Now”

1. Enter a “Hostname (Domain Name)” of your choosing E.g.. talosdvr

2. Select an extension E.g.. dyndns.tv3. Enter the IP address at the location the DVR will be

running• The IP address of your current location is shown below

the IP Address field• We recommended you set up your DYN account using a

PC connected to the network the DVR will be connected4. Click “Add To Cart”5. Proceed to checkout

• The web site will walk you through account registration and send an e-mail to you with a link for final activation

• Note that the amount shown in all cost fields will be $0.00

Signing up for your Domain name

The current IP Address will be

shown here

1 2

3

4

Page 18: Quick Start Reference Guide

18

DVR Network Settings for Internet access

1. Click the drop-down box to the left of “DDNS Server” and select DYNDNS.org

2. Enter your “Domain Name”3. Enter your “Account” name4. Enter your account “Password”5. Click “Save”6. Reboot the DVR

•Go to main menu and log into the DVR

•Click “Main Menu” then “System Setup” then “Network”

NOTE: Never reboot the DVR using the power switch on the back ofthe unit. Treat the DVR as a Linux based PC and shut it down

properly.• When you exit the “Main Menu” the dialog box to the right will display• Click the down arrow for the drop down menu• Click “REBOOT SYSTEM”• The DVR will reboot and begin recording

123 4

5

6

Page 19: Quick Start Reference Guide

19

Configuring Your Router

You will need to configure your router for Port Forwarding to allow access to your DVR from the internet

•Open Internet Explorer•Enter your router IP address in the address bar, this is the same as your Default Gateway

-We are using a Linksys router with an IP address of 192.168.1.1-Your router may be different, consult your owners manual for port forwarding

•Enter your router Username and Password

•Click the Administration tab•Disable “Remote Management”

Page 20: Quick Start Reference Guide

20

1. Click the “Applications & Gaming” tab2. Enter the name of the Application

• For example Tal DVR3. Enter the port range (80 to 80)

• It is OK to enter the same port number as both the Start and End of the range

4. Enter Mobile Port 88885. Enter Server Port 7777 (Used by the DVR)6. Set Protocol to Both7. Enter the IP address from the DVR

E.g. 168.192.1.2228. Click “Enable”9. Click “Save Settings”

•Click the “Setup” tab

•Click “DDNS”

•Select DynDNS.org

•Enter DynDNS user name

•Enter DynDNS password

•Enter DynDNS Host Name

•Click “Update”

1

2 345

6 7 8

9

Configuring Your Router

Page 21: Quick Start Reference Guide

21

Accessing DVR Over the InternetUsing DVR Client

1. Double-click the DVR Client shortcut icon on your desktop

2. Click “By domain”3. Enter your DDNS Domain Name4. Enter Port 77775. Enter User Name

• The default is “admin”6. Enter Password

• The default is “666666 or 888888”7. Check “Save Password”8. Check “Auto-preview…”9. Click “Login”All information will be saved for future login

Once video has loaded click “Exit”

Accessing DVR over the Internet using Internet Explorer

•The first time you access your DVR using Internet Explorer it is necessary to temporarily update your browser security settings so Internet Explorer can load ActiveX controls to view the video server

•Open Internet Explorer•Click Tools and then Internet Options

1 2

3

456

7

8

9

Page 22: Quick Start Reference Guide

22

Click the “Security” tab and then “Custom level”

•Enable all settings under ActiveX controls and plug-ins•Click OK

•Click Apply•Click OK•Close Internet Explorer to save changes

Click Yes in the “Are you sure you want to change…” dialog box

Page 23: Quick Start Reference Guide

23

• Open Internet Explorer – Internet Explorer is recommended for network or internet access to your DVR

• In the address line, enter your domain name– The name you created when you set up your DynDNS account E.g.. http://talosdvr.dyndns.tv

If IE displays the warning above, click the yellow barClick Run ActiveX ControlYou now have access to your DVR and Log-in screen

NOTE: The security settings of some computers may not allow access to the DVR. If you can see “LvrWeb” on the browser tab, the DVR is functioning properly and you are connected. It may be necessary for you to request help from a computer specialist to set the computer to view the DVR

Page 24: Quick Start Reference Guide

24

•Enter User Name•The default is “admin”

•Enter Password•The default is “666666 or 888888”

•Check “Auto-preview…”•Click “Login”Once video has loaded click “Exit”

•You can now reset the security settings in Internet Explorer•Click Tools, Internet Options, Security•Click Reset all zones to default level•Click OK

Page 25: Quick Start Reference Guide

25

Viewing the DVR with Your Smartphone

•Go to your cell/mobile phone provider’s market•Search for talos•Click on IP Camera Viewer (iPhone) or IP Cam Viewer (Droid)•Download and install the application

Page 26: Quick Start Reference Guide

26

Viewing the DVR with Your Smartphone

1. Click “+” to add cameras2. Select IP Camera, DVR, NVR3. Name the camera you will view4. Select Talos from the “Make” list5. Select Talos H.264 DVR Mobile Port

from the “Model” list6. Enter your DynDNS name into “Host/IP”

field7. Enter 8888 into the “Mobile Port” field8. Enter the DVR channel to associate with

the camera you will view9. Enter your DVR login user name into the

“User” field10. Enter your DVR login password into the

“Pswd” field11. Click “Test” to confirm the channel is

working12. Repeat these steps for up to 8 cameras

1

2

3456

7 89 10

11

12

Page 27: Quick Start Reference Guide

27

Viewing the DVR with Your Smartphone

• Place a shortcut to IP Cam Viewer on your Smartphone main screen, touch to launch the viewer application

• You can view 4 or 8 cameras at a time depending on the phone orientation

– horizontal for 4 cameras– vertical for 8 cameras

• Tap a camera to view an individual camera

• Click the camera icon to take a picture of the camera’s view

• Use your smartphone to keep tabs on your home, office or store at any time