SEPENI RAMESH KUMAR H.No.10-98,Denduluru,Denduluru (M.D), West Godavari Dist.,Andhra Pradesh,India - 534432

E-mail: rameshrk349@gmail.com Mobile: +91 9866533346 - INDIA Mobile: +971 55 790 5794 – UAE (Present)

OBJECTIVE: To be a part of a highly motivated team and render service by maximum utilization of knowledge and skills, to step forward in the field of DESIGN, to accept the challenges of the Industry & do the creative & Innovative work. CODE KNOWLEDGE:BPVC ASME Sec VIII Division 1 & 2, API 650 & API 12F, BPVC ASME Sec II, Flange and pipe & Pipe fittings Standards PROFESSIONAL SUMMARY: Participated in ASME AUDIT-2014 for U-stamp & S-stamp Also participated in ISO AUDIT and maintain documents as per ISO Total 4 Years in Design & Review Design documents, checking of drawings, drafting, Preparation of bill

of material and guiding draftsmen in the preparation of drawings for Vessels and columns Good exposure about pressure vessels, columns and also in cement & industry(gear, Pinion, support

roller, kiln shells, tire & rotary kilns) Familiar with ISO standard practices Expertise in Reverse Engineering practices Knowledge of various standards like ASME, API, BIS, ASTM & DIN Preparation and verification of Vessel strength calculations Using PV Elite, Nozzle PRO and ASME & API Study of tender and customer enquiries and drawings

PRESENT EMPLOYER: SEKO MIDDLE EAST FZE, Sharjah, UAE.As an Engineer in Design DepartmentFrom July 2015 To Till Date.PAST EXPERIENCE: - THE K.C.P. LIMITED. (Heavy Engineering Division) (From 13/08/2012 to 14/03/2015) An ISO 9001-2008 Company involved in manufacturing of heavy and light Machinery for Cement,

Sugar, Power, Steel, Dished Ends, Steel Castings, Heavy gears, Boiler and Pressure Vessels etc. The company is equipped with good facilities of Foundry, Heavy Fabrications, and Light & Heavy Machining under one roof.

The Company has been awarded for using “U” & “S” stamps by A.S.M.E for Boilers & Pressure Vessels.RESPONSIBILITIES: Engineering Calculation for Shells, Dished Ends & Nozzles as per ASME Sec. VIII Div.1 PVELITE-2016

and obtaining approval from Authorized inspector Selection of material based on the process requirement. Preparation of Bill of materials based on the layout & design requirement and indent the material to

Purchase department. Selecting the requirement of impact test, Radiography test as per ASME Sec VIII Div.1. Calculation of weight of dished end and vessel components using 3D modeling in Auto CAD & Inventor,

PV Elite Checking of interference for assembly using 3D modeling Checking of manufacture drawings for cement plant equipment like Rotary Kiln shells, Mill shells with

manholes, Mill heads. Checking of drawings prepared by draftsmen and guiding draftsmen for preparation of drawings and

Bill of material. Preparing machine layout drawings and detailing as per the assembly. Preparation of proposal drawings as per customer requirement. Interacting with client for Collect the project data from the client by visiting the plant. Preparation of Manufacturing drawings for space application Preparation of List of raw material for the pressure vesselEXTRA RESPONSIBILITIES:

Maintaining documents as per ISO 9001-2008 and preparation of charts for man hours spent for various jobs on a monthly basis.

Department Leader in 5’S activities.PROJESTS EXICUTED:a. OIL AND GAS INDUSTRY:1. Executed “Air Receiver” for “The KCP Limited-Mechanical Maintenance Dept.”2. EIL – Columns(2nos) for CPCL Blow Down Tower and Debutanizer both are having individual weight of 110 Tonsb. CEMENT & SUGAR INDUSTRY: Projects: Mill & Kiln Gears, Pinion, Cement Mills & Kiln shells, Support roller, Shafts and Bearings Customers: Ambuja cement, Binani cements, Penna cements, Orient Cements,

Mangalam cements, Ultratech cements, India cements. PAST EXPERIENCE: - Quality Infra Projects International Private Limited. (Chennai) (From 14/03/2015 to 22/07/2015)Quality international is one of the leading PROCESS EQUIPMENT manufactures inSHARJA, FUJARIYA,UNITED URAB EMIRATES. It’s accredited with ISO 14001:2004, ISO 9001:2008, BS OHSAS 18001:2007 & ASME “U”,”U2”&``S” and NB Certifications. And also Design equipment based on ASME, PD5500, TEMA, and API 650 & 620. A company involved in Oil & Gas Projects, Petrochemical & Refinery, Chemical and food processing industries.RESPONSIBILITYS:- Design of Pressure vessels, Columns, Reactors, Cladded Vessels as pre ASME Sec VIII-Div.1 Local load analysis as per WRC-107 & WRC-297 with PV Elite software. Design of Saddle supports for Horizontal vessels with PV Elite software. Design of Skirt supports, Leg & Lug supports for Vertical vessels with PV Elite software/Spreadsheets. Design of Wind & Seismic load on vessels based on International standard. Nozzle external loading calculations of Existed Vessel using Nozzle PRO. Selection of Radiography& PWHT requirement as pre ASME & Clients. Impact requirement of plate as pre give MDMT,ASME & Client Data Sheet Checking of drawings prepared by draftsmen and guiding draftsmen for preparation of drawings and

Bill of material. Calculation of weight of dished end and vessel components using 3D modeling in Auto CADPOJESTS EXICUTED:-1.) CLEAN FUEL GAS 2020” - FDH JV” It’s was a huge package of vessels. Which contains Pressure Vessel, Claded Vessel, and Columns. Design and engineer works included. Project contains total 147 No of vessels. All Vessels are U- Stamp required. Vessel design completed and also received with minor Comments. PRESENT EXPERIENCE: - SEKO MIDDLE EAST FZE. (Sharjah, UAE) (From 28/07/2015 to Present) SEKO has been a significant manufacturer of metering pumps and dosing systems for over 40 years. It has gained a worldwide leader position in many fields by supplying innovating products and offering reliable solutions for the dosing, injection and transfer of liquids, together with an efficient control of the related chemical parameters. SEKO Quality system is certified ISO9001-2000 and ASME U-Stamp Certified. Mainly working on the chemical injection package. RESPONSIBILITYS:- Design of Pressure vessels, Tanks as pre ASME Sec VIII-Div.1,Div.2 & API12F & API 650 Local load analysis as per WRC-107 & WRC-297 with PV Elite software. Design of Saddle supports for Horizontal vessels with PV Elite software. Design of Non Circular vessels (Rectangular Vessels) Design as per Appendix-13. Flange Design As Per Appendix-2 Design of Skirt supports, Leg & Lug supports for Vertical vessels with PV Elite software/Spreadsheets. Design of Wind & Seismic load on vessels based on International standard. Selection of Radiography& PWHT requirement as pre ASME & Clients. Impact requirement of plate as pre give MDMT,ASME & Client Data Sheet

Checking of drawings prepared by draftsmen and guiding draftsmen for preparation of drawings and Bill of material.

Review the P&ID drawings for SKID package.POJESTS EXICUTED:-1.) SAMSUNG TAKREER:

Project contains total 43 no of skid packages out of 3 are U-stamp required. Project was successfully completed with in time. Full of packages are delivered to site. Vessels design got approved with AI & Stamped. Which contains both horizontal and vertical vessels.

2.) GS E&C NSRP - Lubricity Improver:Project contains 1 no of skid package delivery. Which having a single vertical tank design. Design was made and submit to the client for comments. Approval was received with no comments.

3.) NCC – QASSIM_SEC:. This project we are made for Saudi Electricity Company. This project contains 6 skid packages system. In that 3 tanks are made with SS Material and other 3 are GRP tanks. Tank design and engineering was completed without comments.

4.) AL-TOUKHI_SEC:This second project we received from Saudi Electricity Company. Which includes 10 No’s of skid packages system. Out of 5 tanks are made from SS material and remaining 5 are GRP tanks. Design of vessel completed with zero comments. And also approved.

5.) MIES_QAFAC:Project contains a single skid package system out of which is a rectangular tank. Which is designed based on by using Code cal software (PV Elite). Design submitted for review t the clients. Design documents was approved without comments.

EDUCATIONAL SUMMARY: (70+ AGGREGATE THROUGHOUT CAREER) B-Tech in MECHANICAL from Jawaharlal Nehru Technological University, Kakinada in 2012 (70% ) Intermediate (+2) from Board of Intermediate, Andhra Pradesh in 2008 (74.4%). Tenth (X) from State Board (AP), Z.P.H School in 2006 (73%). TECHNICAL SKILLS: Software (Design) Known : PV Elite, Code Cal, Nozzle PRO (FEA Analysis). Software (Drafting) Known : Auto CAD & INVENTOR. Operating Systems : Windows XP, Windows 7. Others : MS Office PERSONAL SKILLS: Positive Attitude. Willing to learn and adaptable new technology in a short period of time. Can be able to work well as individual and also in a Team. SITE VISITS MADE TO: Orient Cements, Devpur, Andhra Pradesh Tamilnadu cements, Alangulam,Tamilnadu Shrdlow India Ltd, Chennai EIL, New Delhi, IndiaPERSONAL PROFILE:

Name : S. Ramesh KumarFather Name : S. SrinivasaraoLanguages known : English, Telugu, Hindi, Tamil.Marital status : UnmarriedPASS PORT NO : K3772048Nationality : Indian

I hereby certify that the above information’s are true to the best of my knowledge. PLACE: Sharjah, UAEDATE: (RAMESH KUMAR.S)