references - springer978-3-540-69471-7/1.pdf · copco air compendium. atlas copco ab, stockholm ......
TRANSCRIPT
References
Aberger M, Otter M (2002) Modeling friction in Modelica with the Lund-Grenoble friction model. Proc 2nd Int Modelica Conf, Oberpfaffenhofen, pp285–294
Adams G O, Bonnell R D (1968) Computer simulation of fluid power systems.Proc Nat Conf on Fluid Power, accessed via http://www.nfpa.com, pp 169–182
Adler M (1934) Strömung in gekrümmten Rohren. Zeitschrift für angewandteMathematik und Mechanik 14(5): 257–275
Afanasyev V V (1968) Variations of the effective areas of diaphragms. In: Aizer-man M A (ed) Pneumatic and hydraulic control systems. Pergamon Press, Ox-ford London Edinburgh New York, pp 311–319
Agel J S, Codina E (1996) Relation between sound pressure level and flow rateparameters of pneumatic silencers. Proc 47th Nat Conf on Fluid Power, Chi-cago, accessed via http://www.nfpa.com
Al-Ibrahim A M, Otis D R (1992) Transient air temperature and pressure meas-urements during the charging and discharging processes of an actuatingpneumatic cylinder. Proc 45th Nat Conf on Fluid Power, Chicago, accessedvia http://www.nfpa.com, pp 233–239
Ams F, Oehrle U (1995) Eigensicheres Piezo-Ventil. Geringer Energieverbrauchund erweiterter Anwendungsbereich. Verfahrenstechnik 29(12): 33–34
Andersen B W (1967) The analysis and design of pneumatic systems. John Wiley& Sons, New York London Sydney
Andersson S B, Bévengut G, Eckersten J, Ek G, Kalldin B (eds) (1975) AtlasCopco Air Compendium. Atlas Copco AB, Stockholm
anon. (1956) ARCA 01065 pneumatic positioner - Technical description. ARCA-Regler GmbH, Tönisvorst
anon. (1962) VDI/VDE-Richtlinie 2173 Strömungstechnische Kenngrößen vonStellventilen. Verein Deutscher Ingenieure, Düsseldorf
anon. (1975) ISO 2533 Standard-Atmosphere. International Organization forStandardization, Genéve
anon. (1984) ISO 2787 Rotary and percussive pneumatic tools – Performancetests. International Organization for Standardization, Genéve
anon. (1985a) ISO 6432 Pneumatic fluid power – Single rod cylinders – 10 bar(1.000 kPa) series – Bores from 8 to 25 mm – Mounting dimensions. Interna-tional Organization for Standardization, Genéve
anon. (1985b) ISO 5598 Fluid power systems and components – Vocabulary. In-ternational Organization for Standardization, Genéve
298 References
anon. (1985c) Druckluftmotoren laufen trocken. VDI Nachrichten 39(19): 38anon. (1989) ISO 6358 Pneumatic fluid power – Components using compressible
fluids – Determination of flow-rate characteristics. International Organizationfor Standardization, Genéve
anon. (1996a) Das A und O der Endlagendämpfung. AB Rexroth Mecman, Stock-holm
anon. (1996b) Air braking equipment for towed vehicles in accordance with coun-cil directive 71/320/ EEC. Diagrammatic views and description of brakingsystems and air braking equipment. WABCO Fahrzeugbremsen GmbH, Han-nover
anon. (1998) ISO 4414 Pneumatic fluid power – General rules relating to systems.International Organization for Standardization, Genéve
anon. (1999) Control valve handbook. 3rd ed. Fisher Controls International, Inc.,Marshalltown, Iowa
anon. (2000a) ISO/DIS 8778 Pneumatic fluid power – Standard reference atmos-phere. International Organization for Standardization, Genéve
anon. (2000b) ISO 6953-1 Pneumatic fluid power – Compressed air pressureregulators and filter-regulators – Part 1: Main characteristics to be included inliterature from suppliers and product-marking. International Organization forStandardization, Genéve
anon. (2000c) ISO 6953-2 Pneumatic fluid power – Compressed air pressureregulators and filter-regulators – Part 2: Test methods to determine the maincharacteristics to be included in literature from suppliers. International Or-ganization for Standardization, Genéve
anon. (2000d) Know How in Pneumatics – components catalogue. Rexroth Mec-man, Hannover
anon. (2000e) C4 Katalog im PDF-Format. SMC Pneumatik GmbH, Egelsbachanon. (2000f) Japanese Industrial Standard JIS B 8390 Pneumatic fluid power –
Components using compressible fluids – Determination of flow-rate charac-teristics. Translated and published by Japanese Standards Association, Tokyo
anon. (2001a) ISO 10099 Pneumatic fluid power – Cylinders – Final examinationand acceptance criteria. International Organization for Standardization,Genéve
anon. (2001b) ISO 12238 Pneumatic fluid power – Directional control valves –Measurement of shifting time. International Organization for Standardization,Genéve
anon. (2003) Technische Information Prozessmodul SPEEDy. Kuhnke GmbH,Malente
anon. (2004a) ISO 15552 Pneumatic fluid power – Cylinders with detachablemountings, 1.000 kPa (10 bar) series, bores from 32 mm to 320 mm – Basic,mounting and accessories dimensions. International Organization for Stan-dardization, Genéve
anon. (2004b) Product service life at Festo. Brochure 906.FIF. Festo AG & Co,Esslingen
anon. (2005) High-Speed – gewußt wie. Ölhydraulik und Pneumatik o+p49(9): 538–540
299
anon. (2006a) Dymola – Multi-engineering modeling and simulation. Accessedvia http://www.Dynasim.com
anon. (2006b) Modelica portal. Accessed via http://www.modelica.org/http://www.modelica.org/
library/PneuLibAraki K, Chen N (1999) Pressure versus flow characteristics of a diaphragm type
pneumatic pressure control proportional valve. Proc 4th JHPS Int Symp onFluid Power, Tokyo, pp 413–418
Araki K, Tanahashi T, Nishimura M (1982) Measurement of the friction forces ofpneumatic cylinders. Proc 5. Aachener Fluidtechnisches Kolloquium, Aachen,vol 3, pp 55–74
Araki K, Yumuro A, Chen N, Ishino Y (1993) Static characteristics of a pneu-matic pressure control proportional valve with nozzle-flapper mechanism.Proc 2nd JHPS Int Symp on Fluid Power, Tokyo, pp 719–72
Atherton P D, Uchino K (1998) New development in piezo motors and mecha-nism. Proc Actuator 98, Bremen, pp 164–169
Backé W, Ohligschläger O (1989) A model of heat transfer in pneumatic cham-bers. The Journal of Fluid Control 20: 61–78
Backé W, Bialas V, Egberts M (1974) Untersuchungen über das dynamische Ver-halten pneumatischer Stellantriebe. Forschungsberichte des Landes Nord-rhein-Westfalen Nr. 2434, Westdeutscher Verlag, Opladen
Baehr H D, Schwier K (1961) Die thermodynamischen Eigenschaften der Luft imTemperaturbereich zwischen minus 210 Grad C und plus 1250 Grad C bis zuDrücken von 4500 bar. Springer, Berlin Göttingen Heidelberg
Bala H, Giesen N, Schmidtke W (1986) Positionierbare Pneumatikantriebe mitgroßer Variantenvielfalt. Ölhydraulik und Pneumatik o+p 30(11): 843–846
Balje O E (1981) Turbomachines, a guide to design, selection, and theory. Wiley,New York
Ballard R L (1974) The dynamic characteristics of pneumatic actuator and valvesystems. Ph.D. thesis, University of Bath
Baoren L, Zhuangyun L (1997) Study on adaptive control for a pneumatic positionservo system. Advances in Modelling and Control 49: 21–28
Barber A (1997) Pneumatic Handbook. 8th edn. Elsevier Advanced Technology,Oxford
Barker H F (1976) Design of a state observer for improving the response of a lin-ear pneumatic servo-actuator. Proc Int Conf on Hydraulics, Pneumatics andFluidics in Control and Automation, Toronto, pp 43–56
Barth H-J (1978) Druckluft-Drehkolbenmotoren – Analyse und Berechnung. Ha-bilitation thesis, Technische Hochschule Clausthal
Barth H-J (1994) Einfache Kennzeichnung und Berechnung von Druckverlustenin der Pneumatik. Ölhydraulik und Pneumatik o+p 38(9): 564–569
Barth H-J (2000) Ungekühlte Druckluft für optimale Energienutzung in derPneumatik. Ölhydraulik und Pneumatik o+p 44(5): 304–306
Barth H-J (2003) Wie kalt wird ausströmende Druckluft? Ölhydraulik und Pneu-matik o+p 47(1): 43–46
anon. (2006c) Modelica portal – PneuLib. Accessed via
References
300 References
Bauer F (2002) Maßnahmen und Methoden zur Flexibilisierung pneumatischerGreifsysteme. Doctoral dissertation, Rheinisch-Westfälische TechnischeHochschule Aachen
Beater P (1999) Entwurf hydraulischer Maschinen. Springer, Berlin HeidelbergNew York
Beater P (2000) Modeling and digital simulation of hydraulic systems in designand engineering education using Modelica and HyLib. Proc Modelica Work-shop 2000, Lund, pp 33–40
Beater P (2003) Endlagendämpfung pneumatischer Zylinder. Ölhydraulik undPneumatik o+p 47(3): 163–167
Beater P (2004) Modelling and control of pneumatic vane motors. InternationalJournal of Fluid Power 5(1): 7–16
Becker R J, Mueller J G (1993) Electronically controlled turbine-driven airstartermotor. Proc Int Truck and Bus Meeting and Exposition, Detroit, Michigan,SAE Technical Paper Series 933064
Belforte G, Raparelli T (1997) Friction analysis of pneumatic semi-rotary actua-tors. Tribology Transactions 40: 57– 62
Belforte G, D’Alfino N, Raparelli T (1989) Experimental analysis of frictionforces in pneumatic cylinders. The Journal of Fluid Control 20(1): 42–60
Belforte G, Carello M, D’Alfio N (1995a) Effects of geometry on flow in noncon-ventional pneumatic valves. Proc 9th World Congress on Theory of Machinesand Mechanisms IFToMM, pp 2680–2685
Belforte G, Carello M, D’Alfio N (1995b) Study of digital pneumatic valves ge-ometry. Proc 4th Scandinavian Int Conf on Fluid Power, Tampere, pp 467–480
Belforte G, Gastaldi L, Sorli M (1998) Properties and mechanical performance ofPZT actuators. Proc Actuator 98, Bremen, pp 313–317
Belforte G, Manuello Bertetto A, Liu S, Mazza L (1999) Wear and failure analysisin pneumatic cylinders under radial load. Proc 11th Int Sealing Conf, Dresden,pp 317–330
Belforte G, Mattiazzo G, Mauro S (2000) Design criteria for flow proportionalcontrol valves. Proc FLUCOME 2000, Sherbroke (QC)
Belforte G, Sorli M, Gastaldi L (2002) Experimental and numerical analysis onbimorph piezo-actuators. Proc Actuator 2002, Bremen, pp 417–420
Belforte G, Raparelli T, Mazza L, Trivella A (2005) Analysis, design, and com-parison of different types of pistons for sealless pneumatic cylinders andvalves. Tribology Transactions 48(3): 377–388
Benchabane S, Lecerf J P, Bonis P M (1994) Economic measurement of ISOpneumatic coefficients. Proc 11. Aachener Fluidtechnisches Kolloquium,Aachen, pp 131–141
Benedict R P (1971) Generalized contraction coefficient of an orifice for subsonicand supercritical flow. Trans ASME – Journal of Basic Engineering93(6): 99–120
Beresowez G T, Dimitrijew W N, Nadshafow E M (1958) Über die zulässigenVereinfachungen bei der Berechnung pneumatischer Regler. Feinwerktechnik62(5): 159–167
301
Berninger J F (2002) Comparing ISO sonic flow to ANSI Cv in pneumatic direc-tional control valves. Proc 49th Nat Conf on Fluid Power, Las Vegas, Nevada,pp 153–160
Bharath S, Nakra B C, Gupta K N (1990) Mathematical model of a railway pneu-matic brake system with varying cylinder capacity effects. Trans ASME –Journal of Dynamic Systems, Measurement, and Control 112(9): 456–462
Bialas V (1973) Ein Beitrag zur Klärung des Verhaltens von Pneumatikzylindern.Doctoral dissertation, Rheinisch-Westfälische Technische Hochschule Aachen
Bideaux E, Scavarda S (2000) Pneumatic pipes – experimental and simulation ap-proach. Proc Bath Workshop on Power Transmission and Motion ControlPTMC 2000, Bath, pp 157–169
Bowns D E, Ballard R L (1972) Digital computation for the analysis of pneumaticactuator systems. Proc Instn mech Engrs 186: 881–889
Brann R P (1966) Linear analysis of a pneumatic differential actuator with posi-tion feedback for prosthesis control. Control 8: 428–430
Brassart P, Scavarda S (1997) Modelling a pneumatic braking system. Proc 5thScandinavian Int Conf on Fluid Power, Linköping, pp 353–362
Brower W B (1990) Theory, tables, and data for compressible flow. HemispherePublishing, New York Washington Philadelphia London
Brower W B, Eisler E, Filkorn E J, Gonenc J, Plati C, Stagnitti J (1993) On thecompressible flow through an orifice. Trans ASME – Journal of Fluids Engi-neering 115: 660–664
Brückner W (1967) Die Hauptabmessungen nichtumsteuerbarer Druckluft-Lamellenmotoren mit radialer Lamellenanordnung für niedrigen spezifischenLuftverbrauch. Doctoral dissertation, Bergakademie Freiberg
Burrows C R (1969) Effect of position on stability of pneumatic servomechanism.Proc Instn mech Engrs – Part C Journal Mechanical Engineering Science11: 615–616
Burrows C R, Webb C R (1966) Use of root loci in design of pneumatic servo-motors. Control 8: 423–427
Burrows C R, Peckham R G (1977) Dynamic characteristics of a pneumatic flap-per valve. Proc Instn mech Engrs – Part C Journal Mechanical EngineeringScience 19(3): 113–121
Caldwell D G, Mecrano-Cerda G A, Goodwin M (1995) Control of pneumaticmuscle actuator. IEEE Control Systems 15: 40–48
Carello M, Ivanov A, Mazza L (2006) Experimental and theoretical methods toevaluate the pressure losses in air distribution lines. International Journal ofFluid Power 7(2): 5–9
Cellier F E (1992) Ordinary differential equation models: Numerical integration ofinitial-value problems. In: Atherton D P, Borne P (eds) Concise encyclopaediaof modelling & simulation. Pergamon Press, Oxford New York Seoul Tokyo
Çengel A (1997) Introduction to thermodynamics and heat transfer.Irwin/McGraw-Hill, Boston Burr Ridge Dubuque Madison New York
Chadwick T H, Brady P L (1957) New design concepts for high pressure pneu-matics systems. Proc 13th Nat Conf on Fluid Power, accessed viahttp://www.nfpa.com, pp 232–251
References
302 References
Champagne R P, Boyle S J (1996) Optimizing valve actuator parameters to en-hance control valve performance. ISA Transactions 35: 217–223
Chen M F (1995) Zustandsgrößengenerierung und ihre Rückführung bei fluid-technischen Positionierantrieben. Doctoral dissertation, Rheinisch-Westfälische Technische Hochschule Aachen
Chen N, Araki K (1995) Pressure versus flow characteristics of a pneumatic pres-sure control proportional valve with diaphragms. Proc 4th Scandinavian IntConf on Fluid Power, Tampere, pp 453–466
Cheng M P, Pourmovahed A, Griffith A M (1993) Comparison of electric andpneumatic power tools – Part I: Mechanical characteristics and cost. SAETrans – Journal of Passenger Cars 102(6): 2271–2285
Cherry C, Gibbons M, Ronayne J (1974) The origins of the air-turbine dentalhandpiece. British Dental Journal 136(6): 469–472
Chillari S, Guccione S, Muscato G (2001) An experimental comparison betweenseveral pneumatic position control methods. Proc 40th IEEE conf on decisionand control, vol 2, pp 1168–1173
Cho S, Fiedler M, Rüdiger F, Helduser S (2006) Virtual-design-model-based pres-sure-tracking control of high-dynamic pneumatic valves using a sliding modecontroller combined with a proportional-integral-derivative scheme. ProcInstn mech Engrs – Part I Journal of Systems and Control Engineering220(5): 353–365
Choi S B, Yoo J K (2004) Pressure control of a pneumatic valve system using apiezoceramic flapper. Proc Instn mech Engrs – Part C Journal MechanicalEngineering Science 218: 83–91
Chou C-P, Hannaford B (1996) Measurement and modeling of McKibben pneu-matic artifical muscle. IEEE Transactions on Robotics and Automation12(1): 90–102
Colin S, Bonnet A, Caen R (1996) A new high supply pressure pneumatic flapper-nozzle with linear behaviour. Trans ASME – Journal of Dynamic Systems,Measurement, and Control 118(6): 259–266
Coughran M T (2003) Dynamic air consumption of control valves. measurement +control 36(8): 235–238
Crnojevic C, Roy G, Bettahar A, Florent P (1997) The influence of the regulatordiameter and injection nozzle geometry on the flow structure in pneumaticdimensional control systems. Trans ASME – Journal of Fluid Engineering119(9): 609–615
Croser P, Ebel F (1999) Pneumatik - Grundstufe. 2nd edn. Springer, Berlin Hei-delberg NewYork
Csanady G T (1964) Theory of turbomachines. McGraw-Hill, New YorkCundiff J S (2001) Fluid power circuits and controls – Fundamentals and applica-
tions. CRC Press, Boca Raton New York Washington DCCzinki A (2001) Konstruktion, Aufbau und Regelung servopneumatischer Robo-
terhände. Doctoral dissertation, Rheinisch-Westfälische Technische Hoch-schule Aachen
D'Alfio N, Ferraresi C (1988) Analysis of the air flow through pressure regulators.Proc XIth Int Conf on Fluidics, Jablonna, pp 84–91
303
Daerden F, Lefeber D (2001) The concept and design of pleated pneumatic artifi-cial muscles. International Journal of Fluid Power 2(3): 41–50
Daser E (1969) Das Reaktionsmoment hochtouriger Lamellenmotoren, seine Mes-sung und Bedeutung für die Auslegung der Motoren. Doctoral thesis, Tech-nische Universität Clausthal
Davis S, Caldwell D G (2006) Braid effects on contractile range and friction mod-eling in pneumatic muscle actuators. The International Journal of RoboticsResearch 25(4): 359–369
Denker K (1987) Pneumatisches Regelventil als Stellglied in der Automa-tisierungstechnik. Ölhydraulik und Pneumatik o + p 31(3): 244–246
Det F, Scavarda S, Richard E (1989) Simulated and experimental study of charg-ing and discharging of a cylinder by using an electro-pneumatic servovalve.Proc 1st JHPS Int Symp on Fluid Power, Tokyo, pp 321–328
Dixon S L (1978) Fluid mechanics, thermodynamics of turbomachinery. 3rd edn.Pergamon Press, Oxford
Dunn A L, Heydinger J, Rizzoni G, Guenther D A (2003) Empirical models forcommercial vehicle brake torque from experimental data. Proc SAE WorldCongress, Detroit, Michigan, pp 257–268, SAE Paper No. 2003-01-1325
Dyson J E, Darvell B W (1993) The development of the dental high-speed air tur-bine handpiece – Part 1 and 2. Australian Dental Journal 38(1): 49–58 and38(2): 131–143
Dyson J E, Darvell B W (1999a) Flow and free running speed characterization ofdental air turbine handpieces. Journal of Dentistry 27(7): 465–477
Dyson J E, Darvell B W (1999b) Torque, power and efficiency characterization ofdental air turbine handpieces. Journal of Dentistry 27(8): 573–586
Eby W R (2005) Feasibility analysis of a powered lower-limb orthotic for the mo-bility impaired user. Master thesis, University of Waterloo. Accessed viahttp://etd.uwaterloo.ca/etd/wreby2005.pdf
Eckersten J (1975a) Simplified flow calculations for pneumatic components. In:Andersson S B, Bévengut G, Eckersten J, Ek G, Kalldin B (eds) Atlas CopcoAir Compendium. Atlas Copco AB, Stockholm, pp 183–192
Eckersten J (1975b) Pneumatic transmission of signals. In: Andersson S B,Bévengut G, Eckersten J, Ek G, Kalldin B (eds) Atlas Copco Air Compen-dium. Atlas Copco AB, Stockholm, pp 211–218
Elmqvist H (1978) A structured model language for large continuous systems.Ph.D. thesis, Lund Institute of Technology
Elmqvist H, Boudaud F, Broenink J, Brück D, Ernst T, Fritzson P, Jeandel A, Jus-lin K, Klose M, Mattsson S E, Otter M, Sahlin P, Tummescheit H, Vanghe-luwe H (1997) Modelica – A unified object-oriented language for physical
http://www.Modelica.org/documents/
Eschmann R (1992) Reibkräfte an Pneumatikdichtungen. Proc 10. Aachener Flu-idtechnisches Kolloquium, Aachen, pp 49–69
Eschmann R (1994) Modellbildung und Simulation pneumatischer Zylinderan-triebe. Doctoral dissertation, Rheinisch-Westfälische Technische HochschuleAachen
References
systems – version 1 September 1997. accessed via
304 References
Esposito A (2000) Fluid power with applications. 5th edn. Prentice Hall Interna-tional Inc., Upper Saddle River, New Jersey
Falkman, H (1975a) Flow of gases in pipes. In: Andersson S B, Bévengut G, Eck-ersten J, Ek G, Kalldin B (eds) Atlas Copco Air Compendium. Atlas CopcoAB, Stockholm, pp 149–192
Falkman, H (1975b) Compressed air distribution. In: Andersson S B, Bévengut G,Eckersten J, Ek G, Kalldin B (eds) Atlas Copco Air Compendium. AtlasCopco AB, Stockholm, pp 473–494
Falkman H (1975c) The motor process. In: Andersson S B, Bévengut G, EckerstenJ, Ek G, Kalldin B (eds) Atlas Copco Air Compendium. Atlas Copco AB,Stockholm, pp 125–148
Fasol K H, Jörgl H P (1979) Zur Modellbildung und Simulation instationärerRohrströmungen. Regelungstechnik rt 27(12): 387–393
Fernandez R, Woods R L (2000) The use of helium gas for high-performance ser-vopneumatics. Proc 48th Nat Conf on Fluid Power, Chicago, IL, accessed viahttp://www.nfpa.com, pp 431–439
Ferraresi C, Giraudo P, Quaglia G (1994) Non-conventional adaptive control of aservopneumatic unit for vertical load positioning. Proc 46th Nat Conf on FluidPower, Anaheim, accessed via http://www.nfpa.com, pp 319–333
Ferraresi C, Franco W, Manuello Bertetto A (1999) Straight fibres pneumaticmuscle: an actuator with high traction force. Proc 6th Scandinavian Int Confon Fluid Power, Tampere, pp 787–798
Feuser A (1983) Ein Beitrag zur Auslegung ventilgesteuerter Vorschubantriebe imLageregelkreis. Doctoral dissertation, Universität Erlangen-Nürnberg
Fiedler M, Helduser S, Rüdiger F (2005) Virtual design of high dynamic pneu-matic valves. Proc Power Transmission and Motion Control PTMC, Bath, pp255–265
Figliolini G, Almondo A, Sorli M (2004) Modelling and experimental validationof a pneumatic servo-solenoid valve. Proc Power Transmission and MotionControl PTMC, Bath, pp 85–98
Fleischer H (1995) Manual of pneumatic system operation. McGraw-Hill, NewYork San Francisco Washington
Fok S C, Ong E K (1995) Position control and repeatability of a pneumatic rodlesscylinder system for continuous positioning. Robotics and Computer IntegratedManufacturing 15: 365–371
Fox R W, McDonald A T, Pritchard P J (2004) Introduction to fluid mechanics.6th edn. John Wiley and Sons, Inc., Hoboken, NJ
French M, Ramirez A C (1996) Towards a comparative study of quarter-turnpneumatic valve actuators. Proc Instn Mech Engrs 210: 543–552
Fritzson P A (2004) Principles of object-oriented modeling and simulation withModelica 2.1. IEEE Press, Piscataway, NJ
Frühauf F, Jäker K P, Siemensmeyer H (1983) Rechnergestützte Positionierungeines Pneumatikzylinders mit Magnetventilen. Ölhydraulik und Pneumatiko+p 27(5): 359–363
Fujita T, Kagawa T, Takeuchi M (1994) Disturbance characteristics of controlvalve positioner. Proc FLUCOME’94, Toulouse, pp 847–852
305
Fujita T, Jang J, Kagawa T, Takeuchi M (1996) Dynamics of pneumatic cylindersystems. Proc 3rd JHPS Int Symp on Fluid Power, Yokohama, pp 259–264
Fujita T, Tokashiki L R, Kagawa T (1999) Stick-sip motion in peumatic clindersdriven by meter-out circuit. Proc 4th JHPS Int Symp on Fluid Power, Tokyo,pp 131–136
Funk J E, Robe T R (1970) Transients in pneumatic transmission lines subjectedto large pressure changes. Int J mech Sci 12: 245–257
Gerts E V, Gerts M E (1999) Selection of the parameters of a reversible pneumaticactuator. Journal of Machinery Manufacture and Reliability 6: 1–6
Gidlund P L (1977) Auslegung pneumatischer Schaltungen – Sizing pneumaticcomponents. Proc Internationale Fachtagung zur Systemschau “Antreiben –Steuern – Bewegen”, Hannover, pp 240–261
Goedecke W D (1980) Möglichkeiten zur Steuerung und Regelung pneumatischerAntriebe. Proc 4. Aachener Fluidtechnisches Kolloquium, Aachen, pp 3–24
Gödert H (1995) Der geregelte Pneumatikantrieb – eine interessante Alternative.Ölhydraulik und Pneumatik o+p 39(5): 397–400
Gödert H (2001) Pneumatisches Proportional-Druckregelventil mit digitaler On-board-Elektronik. Ölhydraulik und Pneumatik o+p 45(6): 429–433
Göttert M (2004) Bahnregelung servopneumatischer Antriebe. Shaker Verlag,Aachen
Göttert M, Neumann R (1997) Genaue Bahnregelung für servopneumatische An-triebe. Proc II. Deutsch-Polnisches Seminar “Innovation und Fortschritt in derFluidtechnik”, Warschau, pp 34–53
Goldfarb M, Celanovic N A (1997) A lumped parameter electromechanical modelfor describing the nonlinear behavior of piezoelectric actuators. Trans ASME– Journal of Dynamic Systems, Measurement, and Control 119: 478–485
Goodman R B (1997) A primer on pneumatic valves and controls. Krieger Pub-lishing Company, Malabar, Florida
Goodson R E, Leonard R G (1972) A survey of modeling techniques for fluid linetransients. Trans ASME – Journal of Basic Engineering 94(2): 474–482
Graham J E (1965) Pneumatic cushioning. February 3, 1965 Machinery (London),pp 264–266
Graham R G (1981) Turbine air motors shed their high-cost image. Machine De-sign 53(11): 93–98
Grassl H (1981) Pneumatische Schwingungsdämpfung – Theorie und Anwendun-gen. Reihe H, Ingenieurwissenschaften. Schweizer Buchagentur, Bern
Guenther R, Perondi E C, DePieri E R, Valdiero A C (2006) Cascade controlledpneumatic positioning system with LuGre model based friction compensation.J of the Braz Soc of Mech Sci & Eng 28(1): 48–57
Güvenc L, Srinivasan K (2000) Modeling and parameter identification of a pneu-matic constant force device. Turk J Engin Environ Sci 24: 383–399
Haack S (1991) Theoretische und experimentelle Untersuchungen zur Aussage-fähigkeit strömungstechnischer Kenngrößen an ausgewählten Strukturenpneumatischer Steuerventile. Doctoral dissertation, Pädagogische HochschuleErfurt/Mühlhausen
References
306 References
Haaland S E (1983) Simple and explicit formulas for the friction factor in turbu-lent pipe flow. Trans ASME – Journal of Fluids Engineering 105(3): 89–90
Haden D (1980) Rolling diaphragm air cylinders. OEM Design 78(Nov): 78–79Hahn H (2000) Nichtlineare Regelung eines servopneumatischen Antriebs. Auto-
matisierungstechnik at 48(3): 140–150Haller R, Latino F (1996) Design considerations and future trends in pneumatics
and electropneumatic systems. Proc 47th Nat Conf on Fluid Power, Chicago,accessed via http://www.nfpa.com
Han B, Fujita T, Kagawa T, Kawashima K, Cai M (1999) Flow rate coefficientmeasurement by using pressure discharge velocity of pneumatic RC circuit.Proc 4th JHPS Int Symp on Fluid Power, Tokyo, p 143–148
Han Wee Ng, Alleyne A (2000) Modeling and bumpless learning control of posi-tion and pressure for an electropneumatic actuator. Proc Fluid Power Systems& Technology 2000, Orlando, Florida, pp 7–8
Han B J, Kawashima K, Fujita T, Kagawa T (2001) Flow rate characteristicsmeasurement of pneumatic valves by pressure response. Proc 5th Int Conf onFluid Power Transmission and Control, Hangzhou, pp 200–204
Hansson C (1975) Rotary air motors. In: Andersson S B, Bévengut G, Eckersten J,Ek G, Kalldin B (eds) Atlas Copco Air Compendium. Atlas Copco AB,Stockholm, pp 329–362
Hantke P (2003) Wasserhydraulik im Bergbau – Entwicklung eines piezo-betätigten Vorsteuerschaltventils. Ölhydraulik und Pneumatik o+p 47(6): 424-–430
Hehn A H (1995) Fluid power troubleshooting. 2nd edn. Marcel Dekker, Inc.,New York Basel Hong Kong
Heinen R (1976) Elektropneumatischer Servoantrieb. Proc 2. Aachener Fluidtech-nisches Kolloquium, Aachen, pp 159–187
Hennig H (1977) Warum vereisen Pneumatikanlagen? msr 20(6): 335–358Hennig H (1979) Zeit- und Bewegungsverhalten pneumatischer Linearantriebe.
Proc 3. Fachtagung Hydraulik und Pneumatik, Dresden, pp 257–272Hennig H (1982) Dimensionierung pneumatischer Übertragungsleitungen. msr
25(4): 198–204Henningson G (1975) Linear motors. In: Andersson S B, Bévengut G, Eckersten J,
Ek G, Kalldin B (eds) Atlas Copco Air Compendium. Atlas Copco AB,Stockholm, pp 360–390
Henri P D, Hollerbach J M, Nahvi A (1998) An analytical and experimental in-vestigation of a jet pipe controlled electropneumatic actuator. IEEE Trans RobAutonm 14(4): 601–611
Heras de las S (2001) A new experimental algorithm for the evaluation of the truesonic conductance of pneumatic components using the characteristic unload-ing time. International Journal of Fluid Power 2(1): 17–24
Heras de las S (2003) Improving gas dynamic models for pneumatic systems. In-ternational Journal of Fluid Power 4(4): 47–56
Hesse S (2003) The fluidic muscle in application. Blue digest on automation.Festo AG & Co. KG, Esslingen
307
Hippe P (1988) Digitale Regelung eines pneumatischen Linearantriebs mit schal-tendem Stellglied. Proc 8. Aachener Fluidtechnisches Kolloquium, Aachen,pp 67–84
Hong Y-S (1986) Berechnung, Verbesserung und Weiterentwicklung von Propor-tionalmagneten als elektromechanischer Signalumformer für Proportional-ventile. Doctoral dissertation, Rheinisch-Westfälische Technische HochschuleAachen
Hougen J O, Martin O R, Walsh R A (1963) Dynamics of pneumatic transmissionlines. Control Engineering 10(9): 114–117
Howe R E (2004) Five myths of pneumatic motion control. Hydraulics and pneu-matics 36(9): 36–38
Hübl W, Giesen N (1996) Pneumatische Türantriebe. Ölhydraulik und Pneumatiko+p 40(3): 196–201
Hullender D A, Woods R L (1985) Modeling of fluid control components. ProcInt Conf on Global Techniques, University of Texas at Arlington, pp 608–619
Iberall A S (1950) Attenuation of oscillatory pressures in instrument lines. Journalof the Research of the National Bureau of Standards 45: 85–108
Ikebe Y, Nakada T (1974) On a piezoelectric flapper type servovalve operated bya pulse-width-modulated signal. Trans ASME – Journal of Dynamic Systems,Measurement, and Control 96(1): 88–94
Ikeo S, Zhang H, Takahashi K, Sakurai Y (1993) Simulation of pneumatic sys-tems using BGSP (Bond Graph Simulation Program). Proc 6th Bath Int FluidPower Workshop, Bath, pp 80–94
Inoue K (1988) Rubbertuators and applications for robots. In: Bolles R and Roth B(eds) Robotics Research. 4th Int Symp, MIT Press, pp 57–63
Ioannidis I (1987) Servopneumatische Drehantriebe für Lageregelungen. Doctoraldissertation, Rheinisch-Westfälische Technische Hochschule Aachen
Istók B, Szente V, Vad J (2003) Behavior of a pneumatic pressure regulator valveunder leakage circumstances. Proc 2nd Int Conf on Heat Transfer, Fluid Me-chanics and Thermodynamics HEFAT, Victoria Falls, Zambia
Itoh K, Machiyama T, Mori H, Outo E (1989) An experimental study on compari-son between two methods (steady flow method & discharging method) oftesting effective area of solenoid valve. Proc 1st JHPS Int Symp on FluidPower, Tokyo, pp 297–304
Jebar H S (1977) Design of pneumatic actuator systems. Ph.D. thesis, Universityof Nottingham
Jebar H S, Lichtarowicz A, Roylance T F (1975) Thermodynamic analysis ofcharging processes. Proc 4th BHRA Fluid Power Symp, Sheffield, pp 1–17
Jebar H S, Roylance T F, Lichtarowicz A (1978) Nomogram methods for the de-sign of pneumatic cylinder systems. Proc 5th Int Fluid Power Symp, ppA.4.47
Jelali M, Kroll A (2002) Hydraulic servo-systems – modelling, identification andcontrol. Springer, London Berlin Heidelberg New York
Jeschke N (1968) Untersuchung der Stopfbuchsenreibung an Stellventilen mitpneumatischem Membranantrieb. Regelungstechnische Praxis rtp 10(3): 105–108
References
308 References
Jiménez A F, García J P (2004) Compressible bench flow adaptions to the experi-mental characterization of pneumatic components. Application to the determi-nation of flow-rate characteristics of a Festo MPYE-5-3/8-010-B proportionalvalve. Proc 3rd FPNI Ph.D. Symp, Terrassa
Kaasa G-O, Chapple P J, Lie B (2004) Modeling of an electro-pneumatic cylinderactuator for nonlinear and adaptive control, with application to clutch actua-tion in heavy-duty trucks. Proc 3rd FPNI Ph.D. Symp, Terrassa
Kagawa T, Shimizu M (1988) Heat transfer effect on the dynamics of pneumaticRC circuit. Proc FLUCOME’88, Sheffield, pp 498–502
Kagawa T, Fujita T, Takeuchi M (1995) Dynamic response and simulation modelof pneumatic pipe system. Proc 8th Bath Int Fluid Power Workshop – Designand Performance, Bath, pp 286–298
Kagawa T, Cai M L, Fujita T, Takeuchi M (2000a) Energy consideration and tem-perature measurement of pneumatic cylinder actuating system. ProcFLUCOME 2000, Sherbroke (QC)
Kagawa T, Tokashiki L R, Fujita T, Sakaki K, Makino F (2000b) Accurate posi-tioning of a pneumatic servosystem with air bearings. Proc Bath Workshop onPower Transmission and Motion Control PTMC 2000, Bath, pp 257–268
Kage K, Kawagoe S, Matsuo K, Tanaka H, Hasegawa I (1985) Attenuation of ex-pansion waves in a pipe of railway’s pneumatic brake system. ProcFLUCOME’85, Tokyo, pp 137–142
Kajima T, Kawamura Y (1995) Development of a high-speed solenoid valve: in-vestigation of solenoids. IEEE Transactions on Industrial Electronics 42: 1–8
Kajima T, Nakamura Y, Sonoda K (1992) Development of a high-speed solenoidvalve: investigation of the energizing circuits. Proc 1992 Int Conf on Indus-trial Electronics, Control, Instrumentation and Automation, San Diego, Cali-fornia, pp 564–569
Kanai E, Sawada T, Tanahashi T, Ando T (1985) Dynamic characteristics ofpneumatic transmission lines. Proc FLUCOME’85, Tokyo, pp 123–128
Karam J T, Franke M E (1967) The frequency response of pneumatic lines. TransASME – Journal of Basic Engineering 90(6): 371–378
Kastner L J, Williams T J, Sowden R A (1964) Critical-flow nozzle meter and itsapplication to the measurement of mass flow rate in steady and pulsatingstreams of gas. Proc Instn mech Engrs – Part C Journal Mechanical Engi-neering Science 6(1): 88–98
Kawakami Y, Akao J, Kawai S, Machiyama T (1988) Some considerations on thedynamic characteristics of pneumatic cylinders. The Journal of Fluid Control19(2): 22–36
Kawakami Y, Takeda R, Kawai S (1991) Some considerations on the generalized
San Francisco, California, pp 543–548Kawashima K, Ishii Y, Funaki T, Kagawa T (2004) Determination of flow rate
characteristics of pneumatic solenoid valves using an isothermal chamber.Trans ASME – Journal of Fluids Engineering 126(2): 273–279
Kayihan A, Doyle F J III (2000) Friction compensation for a process controlvalve. Control engineering practice 8(7): 799–812
FLUCOME’91,conditions for high-speed driving of pneumatic cylinders. Proc
309
Kentschke T (2004) Druckluftmaschinen als Generatorantrieb in Warm-luftspeichern. Doctoral dissertation, Technische Universität Clausthal
Kim D S, Lee W H, Lee M C (2003) Design and experiment of the direct drive-type pneumatic servo valve. Proc Workshop Power Transmission and MotionControl PTMC 2003, Bath, pp 349–356
King T, Pozzi M, Manara A (2000) Piezoactuators for “real world” applications –Can they deliver sufficient displacement? Power Engineering Journal14(3): 105–110
Kirshner J M, Katz S (1975) Design theory of fluidic components. AcademicPress, New York San Francisco London
Koenig B, Ohligschläger O (1989) Ein “intelligenter” elektropneumatischer Stel-lungsregler. Automatisierungstechnische Praxis atp 31(8): 367–373
Kohl A (1973) Fluidische Leitungsdiskontinuitäten, Verzweigungen und ihre An-wendung in Filterschaltungen. Doctoral dissertation, Rheinisch-WestfälischeTechnische Hochschule Aachen
Kollmann E (1968) Wirkung wesentlicher Nichtlinearitäten auf die Stabilität undden statischen Fehler von Stellungsreglern. Automatik pp 379–383
Kolvenbach H (1990) Drehschieber-Servoventile für die Pneumatik. Proc 9.Aachener Fluidtechnisches Kolloquium, Aachen, pp 61–75
Kolvenbach H (1991) Drehschieber-Servoventile für die Pneumatik. Ölhydraulikund Pneumatik o + p 35(1): 43–47
Ko cielny J M, Syfert M, Barty M (1999) Fuzzy-logic fault diagnosis of indus-trial process actuators. Int J Appl Math and Comp Sci 9(3): 653–66
Künzel O (1970) Das Übertragungsverhalten pneumatischer Leitungen. Doctoraldissertation, Technische Hochschule München
Kukulka D J, Benzoni A, Mollendorf J C (1994) Digital simulation of a pneumaticpressure regulator. Simulation 63(4): 252–266
Lai J-Y, Menq C-H, Singh R (1990) Accurate position control of a pneumatic ac-tuator. Trans ASME – Journal of Dynamic Systems, Measurement, and Con-trol 112(12): 734–739
Latino F (1996) Air servo positioning systems, single and multiple axis. Proc 47thNat Conf on Fluid Power, Chicago, accessed via http://www.nfpa.com
Lebig H (1971) Das Durchflußvermögen von Pneumatik-Ventilen. Ingenieur di-gest – Part 1: 10(11): 59–63, Part 2: 10(12): 75–79
Lee S-Y, Blackburn J F (1952) Contributions to hydraulic control: 1 Steady-stateaxial forces on control-valve pistons. Trans ASME 74(8): 1005–111
Leonhard A, Helduser S, Rüdiger F (2006) CFD simulation and experimentalvisualisation of transient flow in pneumatic seated valves. Proc 5th Interna-tional Fluid Power Conference, Aachen, pp 97–108
Leufgen M (1988) Auslegung und Untersuchung geeigneter elektromechanischerWandler für stetige elektropneumatische Ventile. Proc 8th Aachener Fluid-technisches Kolloquium, Aachen, pp 261–278
Leufgen M (1992) Pneumatische Positionierantriebe – Komponenten und System-verhalten. Doctoral dissertation, Rheinisch-Westfälische Technische Hoch-schule Aachen
References
310 References
Leufgen M, Lü Y (1991) Pneumatischer Positionierantrieb mit Schaltventilen. Öl-hydraulik und Pneumatik o+p 35(2): 127–132
Lequesne B (1987) Finite element analysis of a constant force solenoid for fluidflow control. Proc IEEE Industrial Applications Society Meeting, pp 46–51
Lin X, Spettel F, Scavarda S (1996) Modeling and test of an electropneumatic ser-vovalve controlled long rodless actuator. Trans ASME – Journal of DynamicSystems, Measurement, and Control 118: 457–462
Liu Y T, Higuchi T (2001) Precision positioning device utilizing impact force ofcombined piezo-pneumatic actuator. IEEE/ASME Transactions on Mecha-tronics 6(4): 467–473
Lichtarowicz A, Duggins R K, Markland E (1965) Discharge coefficients for in-compressible non-cavitating flow through long orifices. Proc Instn mechEngrs – Part C Journal Mechanical Engineering Science 7(2): 210–219
Lloyd S G (1968) Guidelines for the use of positioners and boosters. Instrumenta-tion Technology 50–54
Louis R J, Logan E (1976) Experimental investigation of flow-induced forces inpneumatic spool valves. Technical Briefs. Trans ASME – Journal of DynamicSystems, Measurement, and Control 98(9): 316–318
Lu Y X, Hong Z (1988) Study on optimization of electro-pneumatic servo controlsystem. Proc FLUCOME’88, Sheffield, pp 295–299
Lü Y (1992) Elektropneumatische Positionierantriebe mit schnellen Schaltven-tilen. Doctoral dissertation, Rheinisch-Westfälische Technische HochschuleAachen
MacBain J A (1985) Solenoid simulation with mechanical motion. Int Journal forNumerical Methods in Engineering 21: 13–18
Mäkinen E, Virvalo T, Mattila J (1993) A model of on/off-valves for controlledpneumatics. Proc 3rd Scandinavian Int Conf on Fluid Power, Linköping,vol 1, pp 423–434
Manuello Bertetto A, Berretta A (1994) An innovative rod-less cylinder designwith electromagnetic coupling for linear transport systems. Proc Nat Conf onFluid Power, Anaheim, accessed via http://www.nfpa.com
Manuello Bertetto A, Mazza L, Pastorelli S, Raparelli T (2002) A model of con-tact forces in pneumatic motor vanes. Meccanica 36: 691–700
Maré J C, Geider O, Colin S (2000) An improved dynamic model of pneumaticactuators. International Journal of Fluid Power 1(2): 39–47
Matthys L, Marchetti P B (1980) Precise pneumatic positioning with diaphragmair cylinders. Machine Design 52(9): 80–83
Mattsson S E, Olsson H, Elmqvist H (2000) Dynamic selection of states in Dy-mola. Proc Modelica workshop 2000, Lund, pp 61–67
McCloy D, Martin H R (1963) Some effects of cavitation and flow forces in theelectro-hydraulic servomechanism. Proc Instn Mech Engrs vol 178, pt 1, no21, 1963–64
Merritt H E (1967) Hydraulic control systems. John Wiley & Sons, New YorkMetzner H (1993) Pneumatik-Dichtungen. In: Ebertshäuser H (ed) Dichtungen für
die Fluidtechnik. Vereinigte Fachverlage, Mainz
311
Miyata K, Hanafusa H (1988) Compensation and velocity control for high speedpositioning of pneumatic cylinders. Proc FLUCOME'88, Sheffield, pp 290–294
Miyata K, Yokota S-I, Hanafusa H (1991) Control of pneumatic drive systems byusing PCM valves. Proc FLUCOME'91, San Francisco, California, pp 373–378
Mo J P T (1989) Analysis of compressed air flow through a spool valve. ProcInstn Mech Engrs 203: 121–131
Monsen J (2000) In the flow with control valves. Chemical processing 63(3): 45–52
Moore P R (1986) Pneumatic motion control systems for modular robots. Ph.D.thesis, University of Loughborough
Müller R (1998) Pneumatics. Theory and applications. Omega Fachliteratur, Dit-zingen and Delta Press Ltd., Berkhamsted Herts
Münzer N, Müller-Lohmeier K (2004) Environmentally induced damage to pneu-matic tubing – causes, mechanisms and forms of manifestation. Proc 4th IntFluid Power Conf, Dresden, vol 2, pp 395–404
Muijtjens R (1998) Praktisches Positionieren mit pneumatischen Linearantrieben.Ölhydraulik und Pneumatik o+p 42(7): 473–476
Mundry S M (2002) Zustandsüberwachung an Prozessventilen mit intelligentenStellungsreglern. Shaker, Aachen
Murrenhoff H (1999) Grundlagen der Fluidtechnik – Teil 2: Pneumatik. Institutfür fluidtechnische Antriebe und Steuerungen, Aachen
Murrenhoff H (2002) Innovative designs and control circuits for proportionalvalves. Proc Nat Conf on Fluid Power, Las Vegas, Nevada, accessed viahttp://www.nfpa.com, pp 691–701
Murtaza M A, Garg S B L (1989) Brake modelling in train simulation studies.Proc Instn mech Engrs – Part F Journal of Rail and Rapid Transit 203: 87–95
Nabi A, Wacholder E, Dayan J (2000) Dynamic model for a dome-loaded pressureregulator. Trans ASME – Journal of Dynamic Systems, Measurement, andControl 122(6): 290–297
Neermann G (1989) In Paris kommt die Druckluft ins Haus. Ölhydraulik undPneumatik o+p 33(6): 522–524
Neff J A (1966) Timing with air. Proc Nat Conf on Fluid Power, accessed viahttp://www.nfpa.com, pp 93–98
Németh H (2004) Nonlinear modelling and control for a mechatronic protectionvalve. Ph.D. thesis, Budapest University of Technology and Economics
Nguyen N-T, Wereley S T (2002) Fundamentals and applications of microfluidics.Artech House, Boston London
Nguyen T (1987) Verhalten servopneumatischer Zylinderantriebe im Lageregel-kreis. Doctoral dissertation, Rheinisch-Westfälische Technische HochschuleAachen
Nguyen T (1996) Proportional- und Servotechnik in der Pneumatik. Ölhydraulikund Pneumatik o+p 40(1): 45–48
References
312 References
Nguyen T, Mauentöbben R (1993) Leckagefreies und robustes Servoventil für diePneumatik. Proc 9. Fachtagung Hydraulik und Pneumatik, Dresden, pp 473–485
Nichols N B (1962) The linear properties of pneumatic transmission lines. ISATransactions (1): 5–14
Noritsugu T (1986) Development of PWM mode electro-pneumatic servomecha-nism. Part II: Position control of a pneumatic cylinder. The Journal of FluidControl 17(2): 7–31
Noritsugu T (1987) Electro-pneumatic feedback speed control of a pneumaticmotor. Part I: With an electro-pneumatic proportional valve. The Journal ofFluid Control 17: 17–37
Noritsugu T, Wada T (1989) Adaptive variable structure control of pneumaticallyactuated robot. Proc 1st Int Symp on Fluid Power, Tokyo, pp 435–442
Ohligschläger O (1988) Pneumatische Ventile – Beschreibung und Vermessung.Ölhydraulik und Pneumatik o+p 32(9): 614–620
Ohligschläger O (1990) Pneumatische Zylinderantriebe – thermodynamischeGrundlagen und digitale Simulation. Doctoral dissertation, Rheinisch-Westfälische Technische Hochschule Aachen
Ohmer M, Neumann R (2004) Pneumatik vs. Elektrik. A&D Kompendium Auto-mation and Drives 2004, accessed via http://www.aud24.net, pp 202–204
Olsson H (1996) Control systems with friction. Doctoral dissertation, Lunds Uni-versitet, Department of Automatic Control
Pantring D (1996) Verfahren zur Berechnung der Durchflußkennlinie pneuma-tischer Druckregelventile. Doctoral dissertation, Universität Dortmund
Parker G A, White D E (1977) Modeling the steady-state characteristics of a sin-gle-state pneumatic pressure regulator. Fluidics Quaterly 9(2): 23–45
Pasieka L (1991) Untersuchungen zur Temperatur- und Energieverteilung inpneumatischen Arbeitszylindern unter den besonderen Aspekten von Tem-peraturgradienten und Wirkungsgraden. Doctoral dissertation, PädagogischeHochschule Erfurt/Mühlhausen
Paul A K, Mishra J K, Radke M G (1994) Reduced order sliding mode control forpneumatic actuator. IEEE Transactions on Control Systems Technology2(3): 271–276
Paulsen P (1989) Pneumatische Proportional-Druckregelventile und -Wegeventile.Drucklufttechnik 8(7–8): 50–52
Pawlak A M, Nehl T W (1988) Transient finite element modeling of solenoid ac-tuators: the coupled power electronics, mechanical, and magnetic field prob-lem. IEEE transactions on magnetics 24 (1): 270–273
Perry J A (1949) Critical flow through sharp-edged orifices. Trans ASME71(10): 757–764
Petersen E (1982) Anti-Blockiersystem für Nutzfahrzeuge. Proc 5. Aachener Flu-idtechnisches Kolloquium, Aachen, vol 3, pp 183–199
Pinches M J, Callear B J (1999) Power pneumatics. Prentice Hall, London NewYork Toronto Sydney
Pott H (1995) Mikropneumatik: Pneumatische Kennwerte und Systemverhalten.Ölhydraulik und Pneumatik o+p 39(2): 114–122
313
Pourmovahed A, Otis D R (1990) An experimental thermal time-constant correla-tion for hydraulic accumulators. Trans ASME – Journal of Dynamic Systems,Measurement, and Control 112(3): 116–121
Prest P, Vaughan N D (1987) Drive circuits of pulse width modulated valves. ProcInt Conf on Fluid Power, Tampere, Finland, pp 217–225
Pu J (1988) Advancements in the programmable motion control of pneumaticdrives for robots and other flexible machines. Ph.D. thesis, LoughboroughUniversity
Pu J, Weston R H (1988) Position control of pneumatic drives and the use oflearning methodologies. Proc 8th Int Symp on Fluid Power, Birmingham, pp169–198
Pu J, Wong C B, Moore P R (1995) An investigation into the profile following ca-pability of servo-controlled air motors. Proc 4th Scandinavian Int Conf onFluid Power, Tampere, Finland, pp 545–555
Pugi L, Malvezzi M, Allotta B, Banchi L, Presciani P (2004) A parametric libraryfor the simulation of a Union Internationale des Chemins de Fer (UIC) pneu-matic braking system. Proc Instn mech Engrs – Part F Journal of Rail andRapid Transit 218(2): 117–132
Purdue D R, Wood D, Townsley M J (1969) The design of pneumatic circuits.Fluid Power International pp 27–36
Pyötsiä J (1991) A mathematical model of a control valve. Doctoral dissertation,University Helsinki
Quaglia G, Sorli M (2001) Air suspension dimensionless analysis and design pro-cedure. Vehicle System Dynamics 35(6): 443–475
Quaglia G, Guala A (2003) Evaluation and validation of an air spring analyticalmodel. International Journal of Fluid Power 4(2): 43–54
Radgen P, Blaustein E (2001) Compressed air systems in the European Union.Energy, emissions, savings potential and policy actions. LOG_X VerlagGmbH, Stuttgart
Raparelli T, Bertetto A M, Mazza L (1997) Experimental and numerical study offriction in an elastomeric seal for pneumatic cylinders. Tribology International30(7): 547–552
Raymond E T, Chenoweth C C (1993) Aircraft flight control actuation system de-sign – Alternate command systems. Society of Automotive Engineers, Inc.,Warrendale PA
Reethof G (1955) The analog computer as a design tool in the study of a velocity-control hydraulic system. Proc 11th Nat Conf on Industrial Hydraulics, Chi-cago
Reid J, Stewart C D (1988) A review of critical flow nozzles for the mass flowmeasurement of gases. Proc FLUCOME’88, Sheffield, pp 454–457
Renn J C, Lin T I (2001) Research on a pneumatic proportional pressure controlvalve using the CFD analysis. Journal of the Chinese Society of MechanicalEngineers 22(5): 443–50
Reynolds W C, Kays W M (1958) Blowdown and charging processes in a singlegas receiver with heat transfer. Trans ASME 80: 1160–1168
References
314 References
Reynolds D B, Repperger D W, Phillips C A, Bandry G (2003) Modeling the dy-namic characteristic of pneumatic muscle. Annals of Biomedical Engineering31: 310–317
Richer E, Hurmuzlu Y (2000) A high performance pneumatic force actuator sys-tem. Part 1 – Nonlinear mathematical model. Trans ASME – Journal of Dy-namic Systems, Measurement, and Control 122(3): 416–425
Rockstroh M, Hofmann B (1996) Über digitale elektro-pneumatische Stel-lungsregler zur Positionierung von Regelventilen. Proc 28. Kraftwerkstech-nisches Kolloquium und 6. Kolloquium Meßtechnik für Energieanlagen,Dresden, pp 113–122
Rogers G, Mayhew Y (1992) Engineering thermodynamics – work and heat trans-fer. 4th edn. Longman, Harlow
Rohner P, Smith G (1989) Pneumatic control for industrial automation. JohnWiley & Sons, Brisbane New York Singapore Chichester Toronto
Roth P (1972) Zum dynamischen Verhalten des Stellungsregelkreises. Rege-lungstechnik und Prozeß-Datenverarbeitung 20(3): 101–108
Ruppelt E (2003) Druckluft Handbuch. 4th edn. Vulkan, EssenRusterholz R (1986) Vergleich verschiedener Regelkonzepte für die Auslegung
pneumatischer Servoantriebe. Proc 7. Aachener Fluidtechnisches Kolloquium,Aachen, pp 157–178
Rusterholz R, Widmer U (1985) Grundlagenbetrachtungen zur Auslegung pneu-matischer Servoantriebe. Ölhydraulik und Pneumatik o+p 29(10): 757–761and 29(11): 814–816
Sanville F E (1971) A new method of specifying the flow capacity of pneumaticfluid power valves. Proc 2nd Fluid Power Symp, Guildford, pp 37–47
Sbahi A (1992) Druckluft-Lamellenmotor. Doctoral dissertation, TechnischeHochschule Zwickau
Scavarda S (1993) Some theoretical aspects and recent developments in pneumaticpositioning systems. Proc 2nd JHPS Int Symp on Fluid Power, Tokyo, pp 29–48
Schaedel H (1968) Theoretische und experimentelle Untersuchungen an Leitungenund konzentrierten Bauelementen der Fluidik. Doctoral dissertation,Rheinisch-Westfälische Technische Hochschule Aachen
Schillings K (1993) Neue Antriebe und Regelungverfahren für servopneumatischeHandhabungsgeräte. Ölhydraulik und Pneumatik o+p 37(3): 200–208
Schillings K (2000) Servopneumatische Antriebssysteme und Handhabungsgeräte.Shaker, Aachen
Schmidt E (1963) Einführung in die technische Thermodynamik. 10th edn.Springer, Berlin Göttingen Heidelberg
Schneider D (1976) Temperaturverhalten fluidischer Netzwerke. Doctoral disser-tation, Rheinisch-Westfälische Technische Hochschule Aachen
Schneider E (1994) Optimierung pneumatisch angetriebener Schraubwerkzeuge.Doctoral dissertation, Rheinisch-Westfälische Technische Hochschule Aachen
Scholz D, Schabbel U (1987) Regelungskonzept für Bahnsteuerungen mit Druck-luft-Lamellenmotoren. Ölhydraulik und Pneumatik o+p 31( 9): 688–692
315
Scholz D, Mostert E (1988) Geschwindigkeitsgeregelte servopneumatische Zylin-derantriebe. Ölhydraulik und Pneumatik o+p 32(1): 45–52
Scholz D, Schwenzer R (1992) Schnelles pneumatisches Proportionalventil mitintegrierter Elektronik für die breite Anwendung. Proc 10. Aachener Fluid-technisches Kolloquium, Aachen, pp 129–140
Schramm H (1983) Die Hydraulik stand Pate - Einsatzbereiche eines pneuma-tischen Proportional-Druckregelventils. Fluid 17(3): 76–77
Schroeder L E, Singh R (1993) Experimental study of friction in a pneumatic ac-tuator at constant velocity. Trans ASME Journal of Dynamic Systems, Meas-urement, and Control 115(9): 575–577
Schulte H F (1961) The characteristics of the McKibben artifical muscle. ProcApplication of external power in prosthetics and orthotics, National Academyof Science – National Research Council, Washington, DC, pp 95–115
Schultz A (2004) Transient simulation of pneumatic valve solenoids with themethods of finite elements. Proc 3rd FPNI Ph.D. Symp, Terrassa
Schwarz A, Hoffmann B, Schumann D, Rockstroh M, Streubel S (1990) ZumAufbau elektrisch-pneumatischer Stellungsregler mit Mikrorechner für Mem-branstellantriebe. Proc 8. Fachtagung Hydraulik und Pneumatik, ORSTA,vol 1, pp 93–100
Schwenzer R (1983) Entwurf und Auslegung servopneumatischer Antriebsrege-lungen. Doctoral dissertation, Rheinisch-Westfälische Technische HochschuleAachen
Sesmat S, Scavarda S (1996) Static characteristic of a three way electropneumaticservovalve. Proc 12. Aachener Fluidtechnisches Kolloquium, Aachen, pp643–652
Sethson K M R (1993) Identifying the dynamics of fast response solenoid valves.Proc 3rd Scandinavian Int Conf on Fluid Power, Linköping, pp 271–287
Shearer J L (1954) Continuous control of motion with compressed air. Ph.D. the-sis, Massachusetts Institute of Technology
Shen X (2006) Exploiting natural characteristics of pneumatic servo-actuationthrough multi-input control. Ph.D. thesis, Vanderbilt University, Nashville,
db/available/etd-03312006-100035/unrestricted/Dissertation_ShenX.pdf
Shoukat Choudhury M A A, Thornhill N F, Shah S L (2005) Modelling valvestiction. Control engineering practice 13: 641–658
Song B (2002) Robust nonlinear control design via convex optimization and itsapplication to fault tolerant longitudinal control of vehicles. Ph.D. thesis, Uni-versity of California, Berkeley, accessed viahttp://vehicle.me.berkeley.edu/Publications/AVC/bsson_phdthesis.pdf
Sorli M, Pastorelli S (1999) Design analysis of a force controlled pneumatic ac-tuator. Proc 6th Scandinavian Int Conf on Fluid Power, Tampere, pp 861–871
Sorli M, Figliolini G, Pastorelli S (2001) Dynamic model of a pneumatic propor-tional pressure valve. Proc IEEE/ASME Int Conf on Advanced IntelligentMechatronics, Como, pp 630–635
Spanner K (2000) Breakthrough in piezo actuator application. Proc 7th Int Confon New Actuators, Bremen, pp 236–241
References
Tennessee, accessed via http://etd.library.vanderbilt.edu/ETD-
316 References
Stecki J S, Davis D C (1986) Fluid transmission lines – distributed parametermodels. Part 1: A revision of the state of the Art. Proc Instn Mech Engrs200: 215–228. Part 2: Comparison of models. Proc Instn Mech Engrs200: 229–236
Stenning A (1954) An experimental study on two-dimensional gas flow throughvalve-type orifices. ASME paper no 54 – A – 45
Stephan K, Lucas K (1979) Viscosity of dense fluids. Plenum Press, New YorkLondon
Stewart H L, Jefferis F D (1955) Hydraulic and pneumatic power for production –How air and oil equipment can be applied to the manual and automatic opera-tion of production machinery of all types with numerous existing installationsexplained in step-by-step circuit analyses. The Industrial Press, New York
Stoll K (1999) Pneumatik–Anwendungen – Kosten senken mit Pneumatik. 3rdedn. Vogel, Würzburg
Strauss J C, Augustine D C, Johnson B B, Linebarger R N, Sanson F J (1967) TheSCI continuous system simulation language (CSSL). Simulation IX(6):281–303
Stribeck R (1903) Die wesentlichen Eigenschaften der Gleit- und Rollenlager.Mitteilungen über Forschungsarbeiten. Verein deutscher Ingenieure 7: 1–47
Subramanian S C, Darbha S, Rajagopal K R (2004) Modeling the pneumatic sub-system of an S-cam air brake system. Trans ASME – Journal of DynamicSystems, Measurement, and Control 126(1): 36–46
Taft C K, Herrick B M (1981) A proportional piezoelectric electro-fluidic pneu-matic valve design. Trans ASME – Journal of Dynamic Systems, Measure-ment, and Control 103(12): 361–365
Takemura F, Pandian S R, Nagase Y, Mizutani H, Hayakawa Y, Kawamura S(2000) Improvement of vane-type pneumatic motors and trial of hybridpneumatic/electric motors. Proc 2000 Japan – USA Flexible Automation Con-ference, July 23–26, Ann Arbor, Michigan, pp 393–400
Taubitz G (1978) Experimentelle Untersuchung und Modellbildung eines elek-trisch-pneumatischen Ventilstellungsregelkreises. Doctoral dissertation, Uni-versität Erlangen-Nürnberg
Teichmann O E (1957) Analysis and design of air motors. Product Engineering28(2): 167–178
Thompson P A, Arena C C (1975) Prediction of the critical massflow and relatedproblems in the flow of real gases. ASME Paper 75 – FE 12
Tiller M (2001) Introduction to physical modeling with Modelica. Kluwer Aca-demic Publishers, Boston Dordrecht London
Tokhi M O, Al-Miskiry M, Brisland M (2001) Real-time control of air motorsusing a pneumatic H-bridge. Control Engineering Practice 9: 449–457
Tondu B, Lopez P (2000) Modeling and control of McKibben artificial muscle ro-bot actuators. IEEE control systems magazine 20(2): 15–38
Tormen A (1998) Turbo-Banane verändert die Schleifwelt. Schweizer Maschi-nenmarkt 43: 42–44
Tsai D H, Cassidy E C (1961) Dynamic behavior of a simple pneumatic pressurereducer. Trans ASME – Journal of Basic Engineering 83: 253–264
317
Tustin A (1947) The effects of backlash and of speed-dependent friction on thestability of closed-cylce control systems. IEE Journal 94: 143–151
Uchino K (1997) Piezoelectric actuators and ultrasonic motors. Kluwer, BostonDordrecht London
Ulne A, Wase J (2000) Konventionelle und digitale Stellungsregler – einLeistungsvergleich aus anwendungsspezifischer Sicht. Industriearmaturen8(4): 353–356
Ulrich R D, Wirtz D P, Nunn R H (1969) Transient heat transfer in closed con-
Upchurch E R, Vu H V (2000) Modeling a pneumatic turbine speed control sys-tem. Trans ASME – Journal of Dynamic Systems, Measurement, and Control122(1): 222–226
Vaughan N D, Gamble J B (1996) The modeling and simulation of a proportionalsolenoid valve. Trans ASME – Journal of Dynamic Systems, Measurement,and Control 118(3): 120–125
Virvalo T (1989) Designing a pneumatic position servo system. Power interna-tional, pp 141–147
Virvalo T (1993) Pressure and position control with electropneumatic on/offvalves. Proc 3rd Int Conf on Fluid Power '93 ICFP, Hangzhou, pp 489–494
Virvalo T (1995a) Modelling and design of a pneumatic position servo system re-alized with commercial components. Doctoral dissertation, Tampere Univer-sity of Technology
Virvalo T (1995b) Improving the use of the stroke of a pneumatic servo cylinder.Proc 4th Scandinavian Int Conf on Fluid Power, Tampere, pp 528–544
Virvalo T, Mäkinen E (1999) The influence of the supply line pressure on the per-formance of a pneumatic position servo system. Proc 4th JHPS Int Symp onFluid Power, Tokyo, pp 149–154
Völker B (1999) Stetige Pneumatikventile mit minimierter Ansteuerleistung.Doctoral dissertation, Rheinisch-Westfälische Technische Hochschule Aachen
Voss M (2002) Betriebsverhalten und Parameter-Ermittlung pneumatischer End-lagendämpfungen. Diploma thesis, Fachhochschule Südwestfalen, Soest, un-published.
Wakui T, Hashizume T, Nishijima T (2003) Hysteresis compensation loaded indigital positioner for pneumatic control valve with tightened grand packing.Proc SICE 2003 Annual Conf, Fukui, vol 3, pp 3075–3079
Wakui T, Hashizume T, Nishijima T (2004) Valve hysteresis compensation con-sidering flow conditions for digital valve positioner. Proc SICE 2004 AnnualConf, Sapporo, pp 1507a–1507f
Ward-Smith A J (1979) Critical flowmetering: the characteristics of cylindricalnozzles with sharp upstream edges. Int J Heat & Fluid 1(3): 123–131
Watts G P (1965) The response of pressure transmission lines. Proc 20th AnnualISA Conf and Exhibition, Los Angeles, pp 1–8
Wiedmann P (1979) Über das Durchflußvermögen pneumatischer Komponenten.Ölhydraulik und Pneumatik o+p 23(2): 105–110
References
tainers after gas injection. Trans ASME – Journal of Heat Transfer 91(8):461–463
318 References
Wikander J (1988) Adaptive control of pneumatic cylinders. Doctoral thesis, Roy-al Institute of Technology, Stockholm
Wilke G (1999) Take control of control valves. Chemical processing 62(11): 59–66
Will D, Ströhl H (eds) (1990) Einführung in die Hydraulik und Pneumatik, 5thedn. Verlag Technik, Berlin
Winckler R, Kramer K (1960) Näherungsweise Berechnung von pneumatischenDüse-Prallplatte-Systemen. Regelungtechnik rt 8(12): 439–446
Winterbone D E, Pearson R J (1999) Design techniques for engine manifolds –wave action methods for IC engines. Professional Engineering Publ., London
Wintergerst S (1950) Die Schwingungsneigung pneumatischer Verstärker und ihreBeeinflussung durch konstruktive Maßnahmen. Die Technik 5: 82–83
Woods R L, Hullender D A, Hsu C H (1985) State variable models for fluidtransmission line dynamics. Proc FLUCOME'85, Tokyo, pp 115–121
Woschni H-G (1965) Einige Untersuchungen zu dem pneumatischen Längen-meßverfahren. Doctoral dissertation, Technische Universität Dresden
Wroten C F (1969) Pneumatic line losses. Machine Design 41(28): 182–185Wünsch D, Mousa M (1987) Verschleißverhalten von schmierungsfrei betrie-
benen Druckluft-Lamellen-Motoren. Antriebstechnik at 26(2): 47– 50Wylie E B, Streeter V L (1993) Fluid transients in systems. Prentice Hall,
Englewood Cliffs, NJXiang F (2001) Block-oriented nonlinear control of pneumatic actuator systems.
Dotoral dissertation, Royal Institute of Technology, StockholmYoung C D (1955) Pneumatic-hydraulic cylinder positioners. Proc Nat Conf on
Fluid Power, accessed via http:\\www.nfpa.com, pp 41–48Yun S, Lee K, Kim H, So H (2005) Development of the pneumatic valve with bi-
morph type PZT actuator. Materials, Chemistry and Physics 97: 1–4Zalmanzon L A, Hardbottle R, Stainthorp F P (1965) Components for pneumatic
control instruments – The static and dynamic characteristics of pneumatic re-sistances, capacitances and transmission lines. Pergamon Press, Oxford Lon-don Edinburgh New York Paris Frankfurt
Zhang H, Oneyama T, Kagawa T, Kuroshita K (2005) Standard proposal on flow-rate characteristics of pneumatic components. Proc 50th Nat Conf on FluidPower, Las Vegas, Nevada, pp 439–450
Zhou H (1995) Intelligence in pneumatic servo positioning axis. Proc 4th Scandi-navian Int Conf on Fluid Power, Tampere, pp 556–568
Index
actuatorbellows 133–137muscle 140–141piezoelectric 94rack and pinion 145–146Scotch yoke 147–148semi-rotatory 145–149spring-and-diaphragm 271vane 148–149
airatmospheric 8free 2, 10fuse 218motor 151–168properties 8, 10standard conditions 8turbine 168–170
ANR 10area
effectivebellows 134ISO 6358 51
effective cross-sectional 52armature 81artificial muscle 140–141atmospheric pressure 9
bar 10bellows 133–137bend 62–64bimorph bender 94–95Blasius 38bleed nozzle 195buckling of cylinder rod 101brake chamber 139–140
capillary 36, 37causality 287chamber stiffness 20change of state
isentropic 18isobaric 13isothermal 18polytropic 20
choked flow 31circuit
meter-in 241–242meter-out 239–241
closed system 12, 22coefficient of compressibility 51coil 82–84Colebrook’s formula 38compressed air 5
mathematical model 6compressibility factor 8compressible flow 34–35condensation 8conductance
line 58–59sonic 41
connectorlosses 62–63push-in 62push-on 62
continuity equation 27control
gain-scheduling 264hybrid 264position 247–265pressure 202speed 164–168state space 256–264stroke-time 235–237
process control valve 271
320 Index
critical pressure ratio 31cushion seal 99, 102–104cylinder
duplex 127efficiency 119friction 116–122heat transfer 123–126impact 142–143knocking 142–143leakage 122modelling 112–116multi-position 127–130rodless 130–133
cable 132magnetic 132–133split-seal 130–132
rolling diaphragm 137–139single rod 99stroke cushioning 102–112tandem 129triplex 127
density 5, 10dead volume 115design
air turbine 170bellows 134brake chamber 139cylinder
knocking 143multi-position 128rod 99rodless 130–133rolling diaphragm 138
directional control valve 173–174muscle actuator 140–141non-return valve 186oil cushioning 246pressure control valve
diaphragm 197piston 198
proportional solenoid 85rack-and-pinion 146relief valve 213vane actuator 149vane motor 154, 155
dew point 8diaphragm
charging valve 212–213pressure regulator 196–197process valve 269, 271–273rolling 137–139
digital simulation 281–296directional control valve 171–183
operation 175–181piloted 174poppet 173simulation model 181–183switching time 176–178
discharge coefficient 32dither 87droop 194duty cylce 86dwell time 118Dymola 289, 293–295
efficiencycylinder 119piezo-electric actuation 95–97vane motor 151
elbow 63electro-mechanical converter 81–97energy saving 243–244enthalpy 16equation
balance 284constitutive 284of state 7, 8, 25
expansion ratio 158
flowchoked 31coefficient 53force 228frictional 36function 30gain 224, 227laminar 33, 37orifice 32–35subsonic 31turbulent 33
flow control valve 215–219
Index 321
flow ratecalculation 41
restrictions 48simplified 49–50
mass 10nominal 52specification for valves 50–54volume 10
fluid 25fluid mechanics 25fluid power 1fluidics 1force balance
in positioner 275in regulator 196–198
forward flow characteristic 193free air 10free discharge 28frequency response
direct control valve 225, 226line 76–79vane motor 167
frictioncylinder 116–122
dynamic 118static 117steady-state 118
factor 37–39FRL unit 193full pressure motor 158
gaindynamic of positioner 274scheduling 264static of positioner 274
gasconstant 8ideal 6law 6
gauge pressure 9
Hagen 37handpiece 169heat transfer 123–126humidity 8hydraulics 1
hysteresis 211
ideal gas 6equation of state 7properties 6
impact energyimpact cylinder 142stroke cushioning 106
incompressible flow 32internal energy 16isobaric process 13isochoric process 11isothermal process 18isotropic process 18
laminar flow 33, 37Laval 31leakage
cylinder 122energy savings 243
linesteady-state loss 55–61frequency response 76–79mathematical model
discretized 65–69frequency domain 76–79resonance peak 79temperature 56–57
linearity 211
Mach number 23mass flow rate 10mathematical analogy 282mathematical model 282McKibben artifical muscle 140–141meter-in 241–242meter-out 239–241microfluidics 5Modelica 288–290modelling
causal 287object-oriented 287
motorcharacteristics 151–153process 160vane 153–168
322 Index
movingcoil 93magnet 93
nominaldiameter 52flow rate 52
nozzleideal 28–32model 41
nozzel-flapper 272–273
object oriented modelling 286–288observer 248, 263oil cushioning 245open system 22orifice
discharge coefficient 32flow 32–35
compressible 34incompressible 32
overlap 174
Pa 10packing 269–270parallel connection 50piezoelectric
bender 94–95effect 94stack 94
plunger 81pneumatics 1pneumatic timer 217Poiseuille 37polytropic process 20positioner 270–279
analogue electro-pneumatic 276digital 277pneumatic 275
pressure 9absolute 9atmospheric 9critical ratio 31dynamic 9effective 9gain 224, 228
gauge 9ratio 41regulator 193–212static 9total 9
process valve 269pulse-width modulation 86–88PV diagram
constant pressure 15reversible 19vane motor 160
ratiocritical pressure 31of specific heat capacities 19
relative humidity 5relief valve 212–213repeatability 212Reynolds number 38
critical 38
Sanville 41seal
cushioning 102–104viton 101
sensitivity 212series connection 49–50shading coil 82soft start valve 213–214solenoid 81–85
design 81–82dynamics 92proportional 85
sonicconductance 41velocity 23
specific heat capacityconstant pressure 16–17constant volume 11, 13
speedcontrol
cylinders 237–242vane motors 164–168
of sound in air 23spool 174
Index 323
standard reference atmospheremeteorological 10technical 5, 8
starting torque 152state reconstruction 263state-space model 256–258stiffness of chamber 20stroke cushioning 102–112St. Venant 30subsonic flow 31sucking coil 93Sutherland’s formula 26–27
thermal time constant 125thermodynamic process 11
constant pressure 13constant temperature 18constant volume 11general 22polytropic 20reversible 18
throttlingcylinder speed 239–241vane motor 164–166
turbomachine 168turbulent flow 33
underlap 189, 191
valveanalogue 222automatic shut-off 218charging 212check 185delay 217directional control 171non-return 185–187non-return override 188normally closed NC 171normally open NO 171one-way flow control 216pilot 172poppet 173port numbering 171pressure regulator 193–212
dome-loaded 199
pressure relief 212–213process control 269proportional directional 221–233quick exhaust 191relief 212shut-off 185–192shuttle 189–190soft-start 213–214switching time 176–178symbols 171–172throttling 215twin pressure 190–191
vane actuator 148–149vane motor
air consumption 165design 155design schemes 154efficiency 151mathematical model 156-164speed control 166–168starting torque 152throttling 164–166
variableacross 284through 284
VDR 84velocity of sound 23viscosity
dynamic 26kinematic 27Sutherland’s formula 26–27temperature dependency 26
voice coil 93volume flow rate 10
Wantzel 30