repco tyre repair 2014
TRANSCRIPT
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 1/96
Catalogue 2014Catalogue 2014
www.repcotrp.com.auPhone: 1300 303 512
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 2/96
www.repcotrp.com.au
Now known as Repco Tyre Repair Products, the network of vans
has been servicing the Australian tyre repair market for over 38years, specialising in the importation, stocking, distribution and
after sales support of products which are used in the Automotive
tyre repair industries.
With global brands such as Tech International, the world’s
leading producer of tyre and tube repairs and wheel servicesolutions, Monaflex repair systems, Aerochemie, retreading
envelopes and regroovers, Repco Tyre Repair Products provides
a wide range of products and services including Repco branded air
tools and hydraulic jacks, plus leading brands of tubeless valves
and wheel weights.
Repco TRP is now owned by Repco a part of GPC, the Global leader
in aftermarket distribution. You will now benefit from greater
buying power, investment and leverage of their global experience,
plus Repco’s local wider range of products.
REPCO Tyre Repair Products
Page
2www.repcotrp.com.au
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 3/96
Pages..............4 to 30
Pages........... 33 to 38
Pages........... 87 to 88
Tyre Repair Tools ............ 42 to 43
Pages........... 31 to 32
Pages........... 72 to 77
Pages........... 39 to 41
Pages........... 44 to 54
Pages........... 78 to 82
Page ......................83
Pages........... 60 to 62
Pages ............................63 to 71
Air Gauges Pages ..........84 to 86
TYRE REPAIR PRODUCTS WHEEL WEIGHTS
WORKSHOP TOOLS
TRUCK WHEEL SERVICE
TYRE RETREADING
AIR SERVICE PRODUCTS
TYRE VALVES
HYDRAULIC JACKS
VEHICLE HOISTS
S872
S874
S873
S870
S875
S879
Pages........... 55 to 59
CONTENTS
Page
3www.repcotrp.com.au
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 4/96
www.repcotrp.com.auPage
4
TYRE REPAIR PRODUCTS
Tech 2-Way tube repairs are the finest made today. Every repair is permanent and safe.And the repair is twice as strong as the tube itself. Tech makes round and oval repairs forany tube injury, on or off the road. Tech is the pioneer of self-vulcanizing repairs, so youcan depend on high quality Tech repairs throughout the line.
Tech All-Purpose repairs are designed for use in radial and bias tyres. New compoundingand thicker rubber helps to resist dimpling. Tech All-Purpose repairs can also be used for tube repairing.
*Patent No. 2,582,770
TECH
2-Way® Tube Repairs*,All-Purpose Repairs
ROUND 2-WAY TUBE REPAIRS
OVAL 2-WAY TUBE REPAIRS
Cat.No.
DESCRIPTION Dim.(Inches)
Dim.(mm)
BOXQTY.
09 TINY ROUND 1 25 140
10 MINI ROUND 13/8 35 50
11 SMALL ROUND 13/4 45 40
12 MEDIUM ROUND 21/4 60 30
13 LARGE ROUND 31/8 80 20
14 MAXI ROUND 4 100 20
15 GIANT ROUND 5 125 10
10T MINI ROUND TUB 13/8
35 20011T SMALL ROUND TUB 13/4 45 160
12T MEDIUM ROUND TUB 21/4 60 100
13T LARGE ROUND TUB 31/8 80 75
Cat.No.
DESCRIPTION Dim.(Inches)
Dim.(mm)
BOXQTY.
16 MINI OVAL 11/2 x 11/8 40 x 30 100
17 SMALL OVAL 21/2 x 11/2 65 x 40 30
18 MEDIUM OVAL 4 x 2 100 x 50 20
19 LARGE OVAL 6 x 23/4 150 x 70 20
20 GIANT ROUND 61/4 x 4 160 x 100 10
16T MINI OVAL TUB 11/2 x 11/8 40 x 30 200
17T SMALL OVAL TUB 21/2 x 11/2 65 x 40 120
Cat. No. TRNo.
DESCRIPTION BOXQTY.
2000 13 PASSENGER VALVE for .453 rim hole,21/2”, 63mm base diameter
10
6214 - RIM HOLE BUSHING for .625 rim hole,
protects tube valve
each
2211 218 AIR/LIQUID TRACTOR VALVE, 41/4”,
110mm base diameter
5
CAT.NO.
DESCRIPTION Dim.(Inches)
Dim.(mm)
BOXQTY.
111 ROUND ALL PURPOSE 1 65 50
115 SQUARE ALL PURPOSE 13/4 45 100
116 SQUARE ALL PURPOSE 21/4 55 65
117NB NAIL BUSTER
double pack(not shown)
Contains 40-115
All Purpose square repairsand 30-116
All Purpose square repairs
TECH ALL-PURPOSE REPAIRS
TUBE REPLACEMENT VALVES
111 115 116
11
17 18 19 20
12 13
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 5/96
Page
5www.repcotrp.com.au
TYRE REPAIR PRODUCTS
Tech Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe method to properly repair radial and bias tyres. Tech Uni-Seal Ultras have passed the moststringent tyre test standards in the world, including the US FMVSS139 New TyreEndurance Test. These repairs meet or exceed international tyre industry guidelines forproper puncture repair, such as the ECE 108 & 109 Regulations.
Tyres repaired with Uni-Seal Ultras are permanently filled by the stem and reinforcedby the thick rubber cap. The stem and cap of the repair seal and vulcanize to the tyrewith Tech’s thick chemical cushion gum. The 290UL, UL10N is an excellent repair forself-sealing truck tyres produced with sealant beneath the inner liner.
Refer to Tech How-To-Repair Manual RM-4 or Repair Video RDVD1 for installationprocedures and limitations.
Tech Uni-Seal Ultra MAx one-piece repair units provide a simple, quick, and safe method to properlyrepair commercial truck tyres, agricultural tyres, industrial and small OTR tyres. Tech Uni-Seal UltraMax repairs are produced with cross-weave reinforcement for radial or bias tyres, a lead wiremolded in the stem for quick installation, and Tech’s thick chemical cushion gum on the stem andcap for permanent vulcanization to the tyre. These repairs meet or exceed international tyre industry
guidelines for the proper puncture repair.
Proper and improper photos. Tyre cross section with UL8.
TECH Uni-Seal Ultra Repairs
TECH Uni-Seal Ultra Max Repairs
UNI-SEAL® ULTRA REPAIRS FOR RADIAL AND BIAS TYRES
UNI-SEAL® ULTRA MAX REPAIRS FOR RADIAL AND BIAS TYRES
Cat. No. Description PreparedInjury Size
BoxQty.
249UL UL3 UNI-SEAL ULTRA 3mm, 1/8” 25
250ULA UL5 UNI-SEAL ULTRA 6mm, 1/4” 24
251ULA UL5 UNI-SEAL ULTRA 8mm, 5/16” 24
290UL UL10N UNI-SEAL ULTRA 10mm, 3/8” 10
269 CC3 CARBIDE CUTTER 3mm, 1/8” 1
270 CC6 CARBIDE CUTTER 6mm, 1/4” 1
271 CC8 CARBIDE CUTTER 8mm, 5/16” 1
271/38 CC10 CARBIDE CUTTER 10mm, 3/8” 1
S1043 QUICK CHANGE ADAPTER for CC3 1S1040 QUICK CHANGE ADAPTER for CC6, CC6P 1
S1041 QUICK CHANGE ADAPTER for CC8 1
911 ALLEN WRENCH for small QC adaptors 1
Cat. No. Description PreparedInjury Size
BoxQty.
291UL UL10 UNI-SEAL ULTRA MAX 10mm, 3/8” 10
292UL UL13 UNI-SEAL ULTRA MAX 13mm, 1/2” 10
271/38 CC10 CARBIDE CUTTER 10mm, 3/8” 1
272 CC13 CARBIDE CUTTER 13mm, 1/2” 1
S1043/38 QUICK CHANGE ADAPTER for CC10 & CC13 1
912 ALLEN WRENCH for S1041/38 QC adaptor (not
shown)
1
Tyre cross section with repair unit over open injury.
291UL 292UL
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 6/96
www.repcotrp.com.auPage
6
TECH Uni-Seal Ultra Stems for 2-Piece Repair
TECH Uni-Seal Stems for Large 2-Piece Repair
TECH MP Repairs for 2-Piece Repair
TYRE REPAIR PRODUCTS
UNI-SEAL ULTRA STEMS FOR 2-PIECEREPAIR
UNI-SEAL STEMS FOR LARGE 2-PIECE
REPAIR
MULTI-PURPOSE REPAIR UNITS
Tech Uni-Seal Ultra stems feature a lead wire for quick easy installation in prepared tyre injuries. Each stemis wrapped with Tech’s thick chemical cushion gum which permanently fills, seals, and vulcanizes to the tyre.The photo (right) shows a 6mm (1/4”) prepared injury and the same size injury filled with a ULS6 Uni-Seal UltraStem.
These stems must be used in conjunction with the appropiate repair unit on the inside of the tyre.
Tech Multi-Purpose (MP) repairs are produced with unique cross-weave reinforcement and thick chemicalcushion gum that provides excellent performance in both radial and bias tyres. MP repairs must be used torepair crown area punctures in conjunction with the appropriate Uni-Seal stem a a 2-Piece Repair
Uni-Seal stems are designed to fill large punctures in truck, agricultural, Industrial, and or small OTR tyres. Once the damage has been removed with theappropiate cutter, the oversized stem fills the injury with a compression fit. The thick cushion gum wrapped around each stem permanently seals andvulcanizes to the tyre
These stems must be used in conjunction with the appropiate repair unit on the inside of the tyre.
Cat No. Description Prepared Injurysize
BoxQty
250-1UL ULS6 UNI-SEAL ULTRA STEM 6mm, ¼” 20
251-1UL ULS8 UNI-SEAL ULTRA STEM 8mm, 5/16” 20
291-1UL ULS10 UNI-SEAL ULTRA STEM 10mm,3/8” 20
270 CC6 CARBIDE CUTTER 6mm, 1/4” 1
271 CC6 CARBIDE CUTTER 8mm, 5/16” 1
271/38 CC10 CARBIDE CUTTER 10mm,3/8” 1
S1040 QUICK CHANGE ADAPTOR FOR CC6 1
S1041 QUICK CHANGE ADAPTOR FOR CC8 1S1041/38 QUICK CHANGE ADAPTOR FOR CC10 1
911 ALLEN WRENCH for small QC adaptors 1
Cat No. Description Prepared
Injury size
Box
Qty
252-1 UNI-SEAL STEM with Chemical gum 13mm,1/2” 10
253-1 UNI-SEAL STEM with Chemical gum 20mm,3/4” 10
254-1 UNI-SEAL STEM with Chemical gum 25mm,1” 10
272 CC13 CARBIDE CUTTER for 252-1 13mm,1/2” 1
262 BIAS CUTTER for 252-1 13mm,1/2” 1
263 BIAS CUTTER for 253-1 20mm,3/4” 1
264 BIAS CUTTER for 254-1 25mm,1” 1
Cat No. Description Dim (mm) Dim(Inches)
Box Qty
600 MP-0 60 2.¼ 25
601 MP-1 75 3 20
602 MP-2 90 3.1/2 10
250-1UL 251-1UL
600 601 602
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 7/96
Page
7www.repcotrp.com.au
Tech Bias Uni-Seals provide a simple safe permanent method to properly repair 20mm, ¾”and 25mm, 1” injuries in bias truck, agricultural, industrial and small OTR tyres. The oversizestem fills the injury while the fabric reinforced cap restores the integrity to the tyre. Both the stem and cap permanently vulcanize to the tyre with Tech’s thick chemical cushion gum.
TECH Uni-Seal Repairs forBias Tyres
TECH Uni-Seal Ultra, Uni-Seal Ul- tra Max & Bias Uni-SealRepair Limitations Chart
TYRE REPAIR PRODUCTS
UNI-SEAL BIAS REPAIRS
Cat No. Description PreparedInjury size
BoxQty
253 BIAS UNI-SEAL , 14 ply rated 20mm,3/4” 6
254 BIAS UNI-SEAL , 14 ply rated 25mm,1” 6
254HD BIAS UNI-SEAL HEAVY DUTY , 18
ply rated
25mm,1” 4
263 BIAS CUTTER for 253-1 20mm,3/4” 1
264 BIAS CUTTER for 254-1 25mm,1” 1
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 8/96
www.repcotrp.com.auPage
8
TYRE REPAIR PRODUCTS
Radial 2-PieceNail HoleRepair Limitations
Bias 2-PieceNail HoleRepair Limitations
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 9/96
Page
9www.repcotrp.com.au
TYRE REPAIR PRODUCTS
TECH Centech Radial Nail Hole Repairs for 2-Piece Repair
TECH Centech RadialRepairs for ShoulderInjuries
TECH Tyre Repair Chemicals
CENTECH NAIL HOLE REPAIR UNITS
CENTECH RADIAL REPAIR
Centech Shoulder Repair Replacement
Global tyre industry recommendations and tyre manufacturers warranities state that nail hole repairs (puncture repairs) must include a rubber stem orsuitable rubber vulcanizing material to fill the prepared injury and a repair unit to seal the inner liner and reinforce the tyre on the inside.
Tech Centech Radial Repairs and MP repairs used in conjunction with Uni-Seal Ultra stems meet or exceed these requirements as a 2-Piece repair system.Tech’s 2-Piece repair system provides a permanent, safe repair for crowm and shoulder area injuries that last the life of the tyre. For more information refer
to Tech How-To-Repair Manual RM-5.
CatNo
Description Dim(mm)
Dim(Inches)
BoxQty
164 CT10-HD 65 x 80 2.½ x 3.¼ 10
165 CT-10 45 x 75 1.¾ x 3 20
165T CT-10 in plastic
tub
45 x 75 1.¾ x 3 80
166 CT12-HD 70 x 115 2.3/4 x 4.5/8 10
167 CT12 60 x 110 2.3/8 x 4.3/8 10
169 CT14 75 x 145 2.7/8 x 5.3/4 10
170 CT20 75 x 125 3 x 5 10
CatNo
Description Dim(mm)
Dim (Inches) BoxQty
172 CT-22 75 x 165 3 x 6.1/2 10
174 CT-24 75 x 215 3 x 8.1/2 10
Cat No Description BoxQty
704 RUB-O-MATIC rubber cleaner 945ml can 1
704A RUB-O-MATIC rubber cleaner aerosol spray, 336g 1
735 BEAD SEALER 945ml can with brush 1
738 SECURITY COAT inner liner repair sealer, water based ,
470ml can with applicator
1
751 TECH CHEK leak detector concentrate. 945ml 1
760 CHEMICAL VULCANIZING FLUID, 230ml can with brush 1
TECH CHEMICALS
For the best results, Tech nail hole repairs should be used with Techchemical products
165 164 167 166
172
704A
751
760735 738
704
174
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 10/96
www.repcotrp.com.auPage
10
Centech Radial Chemical Repairs, produced with soft grey cushion gum, are ideal for cold chemicalvulcanization after the prepared injury has been filled with rubber and cured with heat. Centech repairs arecenter-over-injury designed and reinforced to restore the strength and flexibility to radial tyres. For bestresults, use 760 Chemical vulcanizing Fluid or 775 Heavy Duty Blue cement
Refer to repair Limitations ChartCentech Cloth Back style repairs provide maximum adhesion and shelf life. Addsuffix “C” to Cat No. (177C Indicates CT-33 Cloth Back)
Add suffix “R” to Cat No. to order Thermacure Radial Tractor Repairs.Add suffix “C” to Cat No. to order cloth back repairs
Centech crown repairs reduce preparation and material costs by up to 40% overstandard repairs.
TYRE REPAIR PRODUCTS
TECH Centech Radial Section Repair Units
CENTECH CROWN REPAIR UNITS
CENTECH CENTRE-OVER-INJURYREPAIR UNITS
CENTECH RADIAL AG REPAIRS
CatNo
Description Dim (mm) Dim (Inches) BoxQty
177 CT-33 100 x 125 4 x 5 10
178 CT-35 125 x 150 5 x 6 10
179 CT-37 125 x 170 5 x 6.3/4 5
Cat No Description Dim (mm) Dim (Inches) BoxQty
176 CT-26 75 x 250 3 x 10 10
180 CT-40 100 x 200 4 x 8 10
182 CT-42 125 x 250 5 x 10 5
184 CT-44 125 x 330 5 x 13 5
186 CT-46 140 x 405 5.1/2 x 16 5
Cat No Description Dim (mm) Dim (Inches) BoxQty
196 CT-80 150 x 195 6 x 7.3/4 5
197 CT-82 190 x 250 7.1/2 x 10 5
198 CT-84 215 x 290 8.1/2 x 11.1/2 5
199 CT-86 245 x 340 9.3/4 x 13.1/2 5
177
180
198 199
182
178 179
184
196 197
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 11/96
Page
11www.repcotrp.com.au
TYRE REPAIR PRODUCTS
TECH Thermacure Radial Repair Units
THERMACURE NAIL HOLE REPAIRS
THERMACURE CROWN REPAIRS
THERMACURE CENTRE-OVER-INJURY REPAIRS
Centech Radial Chemical Repairs, produced with soft grey cushion gum, are ideal for cold chemical
vulcanization after the prepared injury has been filled with rubber and cured with heat. Centech repairs are
center-over-injury designed and reinforced to restore the strength and flexibility to radial tyres. For best
results, use 760 Chemical vulcanizing Fluid or 775 Heavy Duty Blue cement
Cat No Description Dim(mm)
Dim (Inches) BoxQty
111R Round All Purpose 65 2.1/2 50
164R CT-10HDR 65 x 80 2.½ x 3.¼ 10
166R CT-12HDR 70 x 115 2.3/4 x 4.5/8 10
169R CT-14R 75 x 145 2.7/8 x 5.3/4 10
170R CT-20R 75 x 125 3 x 5 10
Refer to repair Limitations Chart.
Refer to repair Limitations Chart.
Refer to repair Limitations Chart.
CatNo
Description Dim (mm) Dim(Inches)
BoxQty
177R CT-33R 100 x 125 4 x 5 10
178R CT-35R 125 x 150 5 x 6 10
179R CT-37R 125 x 170 5 x 6.3/4 5
CatNo
Description Dim (mm) Dim(Inches)
BoxQty
172R CT-22R 75 x 165 3 x 6.1/2 10
174R CT-24R 75 x 215 3 x 8.1/2 10
176R CT-26R 75 x 250 3 x 10 10
180R CT-40R 100 x 200 4 x 8 10
182R CT-42R 125 x 250 5 x 10 5
184R CT-44R 125 x 330 5 x 13 5
186R CT-46R 140 x 405 5.1/2 x 16 5
177R
172R
180R
176R
178R
164R 170R 111R166R
179R
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 13/96
Page
13www.repcotrp.com.au
TYRE REPAIR PRODUCTS
CENTECH AramidReinforced RadialOTR Repairs
Centech radial OTR repairs are reinforced with Aramid cord for maximum strength,
Advanced rubber compounds provide longer performance life in the most extreme OTR
tyre service conditions. Centech radial OTR are very flexible, resulting in easy installation,
minimizing the chance of trapped air as well as restoring the strength of the tyre with little
resistance to the tyre’s flex characteristics. Tech is pleased to offer the most complete line
of radial OTR repairs in the industry. Tech OTR repairs are available to work in all types of
curing systems and perform in any tyre service application.
CENTECH CHEMICAL OTR REPAIRS WITH ARAMID REINFORCEMENTCentech Chemical repairs with Aramid reinforcement are recommended
when the tyres are cured with spotters or press systems. The repair unit is
installed with Tech Chemical Vulcanizing Fluid or Heavy Duty Blue Cement
after the filler rubber has been cured.
CENTECH THERMACURE OTR REPAIRS WITH ARAMID REINFORCEMENTCentech Thermacure repairs with Aramid reinforcement are recommended
when the tyres are cured with spotters, press systems section moulds
or Monaflex systems. Thermacure repair units should be installed with
installed with Tech Heavy Duty Blue Cement after the filler rubber has
been cured. In heat cure applications the repair unit may also be installed
using Tech Tem-Vulc Black Cement
CENTECH CLOTH BACKED OTR REPAIRS WITH ARAMID REINFORCEMENTCentech Cloth Backed repairs with Aramid reinforcement are
recommended for all heat cure vulcanizing systems. These repair units
are produced on a special cloth backing material which provides optimum
bonding surface texture. For best results use Tech Tem-Vulc Black Cement
and Vul-gum cushion gum. Cloth backed repairs have a 5 year shelf life.
CENTECH HEAT CURE OTR REPAIRS WITH ARAMID REINFORCEMENTCentech Heat Cure repairs with Aramid reinforcement are recommended
for all heat cure vulcanizing systems and for section repairs requiring
cure times longer than 5 hours. For best results use Tech Tem-Vulc Black
Cement.
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 14/96
www.repcotrp.com.auPage
14
TYRE REPAIR PRODUCTS
CENTECH Aramid Reinforced Radial OTR Repairs
CENTECH CROWN ONLY REPAIRS WITHARAMID REINFORCEMENT
CENTECH CENTRE OVER INJURY OTR REPAIRS
CENTECH CROWN ONLY OTR REPAIRS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 15/96
Page
15www.repcotrp.com.au
TYRE REPAIR PRODUCTS
TECH
Radial OTR Repair Chart CentechAramidReinforced Repairs
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 16/96
www.repcotrp.com.auPage
16
TYRE REPAIR PRODUCTS
AX Aramid ReinforcedRadial OTR Repair ChartSevere Service Repairs
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 17/96
Page
17www.repcotrp.com.au
TYRE REPAIR PRODUCTS
TECH AX Severe Service Radial Repairs
AX SEVERE SERVICE RADIAL OTR REPAIRS
AX radial repairs are a proven design, enhanced with a large aramid
reinforced platform and advanced rubber compounds to perform in
the most extreme service conditions. The AX non-flex to non-flex
design is recommended for shoulder and sidewall injuries in tyres
used in severe service applications*.
AX Severe Service repairs are available in Uncured or Clothback for
tyres up to 63” rim diameter. These repairs are recommended for all
heat cure vulcanizing systems. For best results, use with Tech Tem-
Vulv Black cement.*For more information refer to Tech’s OTR Repair Manual, RMOTR.
Uncured repair
Cat.No.
Cloth Back
Repair Cat.No.
Dimension
Inches
Dimension mm Box Quantity
AX50U AX50C 5 1/2 x 20 1/2 140 x 520 6
AX60U AX60C 8 1/2 x 24 215 x 610 6AX80U AX80C 9 1/2 x 28 240 x 710 3
AX100U AX100C 11 x 31 280 x 790 3
AX120U AX120C 11 x 35 280 x 890 3
AX140U AX140C 14 1/2 x 46 370 x 1170 1
AX155U AX155C 10 x 55 250 x 1400 1
AX60U
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 18/96
www.repcotrp.com.auPage
18
TYRE REPAIR PRODUCTS
Tech BP repair units, produced with soft gray cushion gum, provide excellent adhesion when used
with Tech 760 Chemical Vulcanizing fluit or 775 Heavy Duty Blue Cement. These repairs are designed to restore the strength and flexibility to bias passenger, truck, farm tractor, skidder and small OTR
tyres.
Bias Ply TyreRepairs
BP REPAIRS
BP REPAIRS
BPT BIAS PLY TRACTOR REPAIRS
TECH BPT Bias Ply Tractor Repairs
Add suffix “C” to Cat No. to order Cloth Back repairs.
Refer to repair Limitations Chart.
Tech BPT bias ply repairs are designed with a wide ply
reinforcement package that provides strength and flexibility
over large injuries in bias agricultural and forestry tyres.
Add suffix “C” to Cat No. to order Cloth Back repairs.
Refer to repair Limitations Chart.
Cat No. Description DIM(mm)
Dim.(Inches)
Piles BoxQty.
603 BP-3 100 4 2 10
604 BP-4 130 5 5/16 4 10
605 BP-5 165 6 1/2 4 10
Add suffix “C” to Cat No. to order Cloth Back repairs.
Refer to repair Limitations Chart.
Cat. No Description Dim.(mm)
Dim.(Inches)
Piles BoxQty
606 BP-6 240 9 9/16 6 5
607 BP-7 290 11 5/8 6 5
608 BP-8 340 13 5/8 6 5
609 BP-9 380 15 1/8 8 3
610 BP-10 430 17 1/8 8 3
Cat. No Description Dim. (mm) Dim.(Inches)
Piles BoxQty
620 BPT-0 200 8 4 10
621 BPT-1 225 9 4 5
622 BPT-2 275 11 4 5
623 BPT-3 375 15 4 5
624 BPT-4 225 9 6 5
625 BPT-5 275 11 6 5
626 BPT-6 375 15 6 5
627 BPT-7 490 19 ½ 6 3
603 604 605
607
620
621
606
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 19/96
Page
19www.repcotrp.com.au
BP Thermacure repairs are designed for bias truck, agricultural and light duty OTR tyre applications up to 22 Plyrated. Thermacure soft black cushion gum provides excellent adhesion in cold chemical cure applications when
used with 775 tech Heavy Duty Blue Cement or with 1082 Tech Tem-Vulc Black Cement.
Tech Bias Skidder (SK) Repairs are specially designed for forestry application tyres. SKrepairs utlilise a wide platform reinforcement package with OTR tyre cord for maximumstrength. Tech produces these repairs with Thermacure soft cuchion gum for hot or coldvulcanisation. For best results use with 775 Heavy Duty Blue Cement or 1082 Tem-Vulcblack cement in heat cure applications.
THERMACUREBias Ply Tyre Repairs
TECHBias Skidder Repairs
TECHBias Skidder Tyre Repair Chart
THERMACURE BP REPAIRS
BIAS SKIDDER REPAIRS
TYRE REPAIR PRODUCTS
603R BP-3R 100 4 2 10
604R BP-4R 130 5 5/16 4 10
605R BP-5R 165 6 1/2 4 10
606R BP-6R 240 9 9/16 6 5
607R BP-7R 290 11 5/8 6 5
608R BP-8R 340 13 5/8 6 5609R BP-9R 380 15 1/8 8 3
610R BP-10R 430 17 1/8 8 3
Cat.No.
Description Dim (mm) Dim.(Inches)
Piles BoxQty
SK12R Bias SkidderRepair
300 12 6 12
Sk16R Bias Skidder
Repair
400 16 6 6
SK20R Bias Skidder
Repair
500 20 6 6
SK24R Bias SkidderRepair
600 24 8 3
Refer to repair Limitations Chart.
SK20R
603R
605R
604R
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 20/96
www.repcotrp.com.auPage
20
TYRE REPAIR PRODUCTS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 21/96
Page
21www.repcotrp.com.au
Tech TOR’s repair injuries up to 11”, 275mm in 60plus ply rated tyres. On-piece construction reduces repair
costs and increases productivity by providing easier installation, eliminating the need for piggybacking
repairs. Specially designed plies dissipate stress and provide maximum flexibility and strength. Advanced
rubber compounding throughout the repair construction resists over cure and flex fatigue when the tyre is
returned to service. Tech is pleased to offer a complete line of TOR repairs suited for every type of curing
system in the industry.
TECH Off Road (TOR)Bias OTR Repairs
TYRE REPAIR PRODUCTS
TOR CHEMICAL REPAIRS
TOR Chemical repairs with gray chemical cushion gum are recommended for tyres vulcanised with spotters or press systems. The repair unit is installedwith tech chemical Vulcanising fluid or Heavy Duty Blue Cement after the fillerrubber has been cured.
TOR THERMACURE REPAIRS
TOR Thermacure repairs with soft black suchion gum are recommended for tyres cured with spotters, press systems, section molds or Monaflex systems.Thermacure repair unites should be installed with Tech Heavy Duty BlueCement after the filler rubber has been cured. In heat cure applications therepair unity may also be installed using Tech Tem-Vulc Black cement.
TOR CLOTH BACKED REPAIRS
TOR Cloth Backed repairs are produced on a special cloth backing material.When removed, this provides optimum bonding surface texture. For bestresults, use with Tech tem-Vulc Black Cement and Vul-Gum cushion gum.Cloth backed repairs have a 5 year shelf life.
TOR4
TOR1R
TOR1C
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 22/96
www.repcotrp.com.auPage
22
TECH Off Road (TOR) Bias OTR Repairs
TOR HEAT CURE REPAIRS
TYRE REPAIR PRODUCTS
ChemicalRepair
Cat. No.
ThermacureRepair
Cat. No.
Heat CureRepair
Cat. No.
Cloth BackRepair
Cat. No.
DiagonalDimension
inches
DiagonalDimension
mm
Plies Box Qty
TOR1 TOR1R TOR1H TOR1C 9 3/4 250 2 10
TOR2 TOR2R TOR2H TOR2C 11 1/2 290 4 10
TOR3 TOR3R TOR3H TOR3C 12 1/4 310 4 5
TOR4 TOR4R TOR4H TOR4C 15 380 6 5
TOR5 TOR5R TOR5H TOR5C 18 3/4 475 6 5
TOR6 TOR6R TOR6H TOR6C 21 3/8 545 6 3
TOR7 TOR7R TOR7H TOR7C 24 1/4 615 8 1
TOR8 TOR8R TOR8H TOR8C 27 1/4 690 8 1
TOR9 TOR9R TOR9H TOR9C 30 760 10 1
TOR10 TOR10R TOR10H TOR10C 32 3/4 830 10 1
TOR11 TOR11R TOR11H TOR11C 34 1/4 870 10 1
TOR Heat Cure repairs produced with black heat cure cushion gum are recommended for all heat cure vulcanizing
systems. The special heat cure gum resists over cure during section repairs requiring extended cure times. For best
results, use with Tech Tem-Vulc Black Cement.
TOR4H
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 23/96
Page
23www.repcotrp.com.au
TYRE REPAIR PRODUCTS
TECH Off Road (TOR) &Bias Skidder Repair Chart
TOR3 TOR4
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 24/96
www.repcotrp.com.auPage
24
TYRE REPAIR PRODUCTS
TECH Permacure®
Inside/OutsideReinforced Repairs
&Repair Kits
PERMACURE TRUCK REPAIRS
PERMACURE EARTHMOVER REPAIRS
PERMACURE KITS
Tech Permacure repairs utilise and exclusivenylon reinforced design that makes applyingrepairs easier, virtually eliminating, cutting andresulting in less labor time and a durable repair,which permanently vulcanises through the tyreinjury.
Tech’s unique cushion gum flows and cures intocracks and Crevices, and actually vulcanises
to the tyre itself. permacure II Repair units areexcellent for smaller injuries.
Permacure and Permacure II repairs can beused in the crown, shoulder and sidewall areas
of all radial and bias tubeless passenger, truck,agricultural, ATV and off – the road tyres
Permacure repairscan be used as an injury fillermaterial and then backed up with the appropriaterepair unit.
PERMACURE & PERMACURE II REPAIRSCat. No. Description Box Qty.
220 PERMACURE II REPAIRS, 3¾”, 95mm 50
222 PERMACURE REPAIRS, 3 ¾ “, 95mm 50
911 PERMACURE WRENCH
915 SPIRAL SEMENT TOOL
925 PERMACURE PASSENGER TOOL
926 PERMACURE PASSENGER REPLACEMENT NEEDLE
Cat. No. Description Box Qty.
224 PERMACURE REPAIRS, 5 1/8”, 130mm 40
TB270 CARBIDE CUTTER
911 PERMACURE WRENCH
915 GIANT SPIRAL CEMENT TOOL
925T PERMACURE TRUCK TOOL
927 PERMACURE TRUCK REPLACEMENT NEEDLE
Cat. No. Description Box Qty.
226 PERMACURE REPAIRS, 7 ½”, 190mm 25
911 PERMACURE WRENCH
916 SPIRAL CEMENT TOOL
925E PERMACURE EARTHMOVER TOOL
928 PERMACURE EARTHMOVER REPLACEMENT NEEDLE
No. 215 PERMACURE REPAIR KIT BOX contains:
• No. 220/222 combination box of permacure repairs contains [25] 220Permacure II repairs and [25] 222 Permacure repairs
• No. 770 Flow-Seal Vulcanising Fluid
• No. 911 Permacure Wrench
• No. 915 spiral Cement Tool
• No. 925 Permacure Tool w/Passenger Needle
• No. 926 Permacure Passanger Replacement Needle
No. 216 PERMACURE TRUCK REPAIR KIT BOX CONTAINS:
• No. 224 Permacure repairs
• No. 770 Flow- Seal vulcanising Fluid
• No. 911 Permacure Wrench
• No. 914 Spiral cement Drill Tool
• No. 915 Spiral Cement Tool
• No. 925T Permacure Tool w/Truck Needle
• No. 927 Permacure Truck replacement Needle
220222
911
911
911
915
915
916
925E
928
925T
927
926
926
925
924
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 25/96
Page
25www.repcotrp.com.au
TYRE REPAIR PRODUCTS
B6 – Economy Plug Patch 1/4” (6mm) 24/Box• B3 – repairs a 1/8” (3mm) injury Use 269 Carbide Cutter
• B6 – repairs a 1/4” (6mm) injury Use TB270 Carbide Cutter
• B8 – repairs a 5/16” (8mm) injury Use 271 Carbide Cutter
The Economy Plug Patch has a dipped stem with lead wire and a cushion gum wrapped cap.
The units meet all RMA tyre repair guidelines for:
• Radial • Bias • Tractor • ATV • Light Truck • Truck Tyres
The Economy Plug Patch should be used with a Carbide Cutter (270/270 for the B6 and 271/271
for the B8) to round the injuries and to remove any excess damage remaining in the tyre.
B3 packed in Box of 48. B6 and B8 Econmy Plug packed in Box of 24.
Economy Plug Patch units are available in Three sizes:
Economy Plug Patch
and Carbide Cutters
271
TB270
269
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 26/96
www.repcotrp.com.auPage
26
Tech offers an exciting array of repair kits, each designed for a specific repair application. Each kitcontains all the neccessary products to assure a complete, permanent repair.
TYRE REPAIR PRODUCTS
TECH
Repair Kits
TRUCK NAIL HOLE REPAIR KIT
ATV & TYRE REPAIR KITS
No. 885 ATV REPAIR KIT contains:• 8 - No.220 Permacure repairs
• 2 – 16g Co2 cartridges
• Brass Co2 discharge tting
• 1 – T-handle spiral cement tool withinsert needle
• 1 – knife for trimming off repairs
• All in an easy carry pouch
*GC16 – 16g CO2 replacement cartridgesavailable.
** PSVA- Brass CO2 discharge fitting
replacement available.
No. 883 TUBELESS ON-THE-WHEELATV CONSUMER KIT Contains:
• 10 - No.204 Flow-Seal Inserts
• 1 - 10ml tube vulcanizing uid
• 1 - No.900 insert tool
No. 872 MOTOR KIT NO.2 (not shown) Contains:
• 8 – No. 11 tube repairs
• 2 – No. 12 tube repairs
• 2 – No. 17 tube repairs
• 1 – No. 18 tube repair
• 1 – 20ml tube vulcanizing uid
• 1 - metal buffer
PTK PERFORMANCE TYRE KIT
• 1 – Box No.249UL Uni-Seal Ultras
• 1 – Box No.250UL Uni-Seal Ultras
• 1 – No. 269 (3mm) Carbide Cutter
• 1 – No. 270 (6mm) Carbide Cutter
• 1 – No. TRT105 Injury measure tool
• 1 – No. 704A Rub-O-Matic aersol
• 1 – No. 738 Security Coat
• 1 – No. S1032 Air Buffer Low Speed
• 1 – No. S1040 Quick Change Adaptorfor 270 Carbide Cutter
• 1 – No. S1043 Quick Change Adaptorfor 269 Carbide Cutter
• 2 – No. S1046 Quick Change Adaptorfor S893 and S2027
• 1 – No. S893 40mm texture brush
• 1 – No. RH140 contour wheel
• 1 – No. 910 cement tool
• 1 – No.911 allen wrench for quickchange adaptors
• 1 – No. 913 slip joint pliers
• 1 – No. 915 spiral cement tool
• 1 – No. 933 rubber scraper
• 1 – No. 936 3mm stitcher
• 1 Box – No.951 white paint sticks 12
pack• 1 – No. S923 safety glasses
• 1 – No. TK knife
• 1 – No. RM4 repair manual
No. 898 PERFORMANCE TYRE KIT, A complete kit for Uni-Seal repair of Speed rated tyre injuries from 1/16” ( 1.5mm) to ¼” (6mm), with tool box, contains:
• 1 - Box No.170 (CT-20) radial repairs
• 1 - Box No.111 All Purpose repairs
• 1 - No. 251 (8mm) Uni-Seal stems• 1 - No. 251/38 (9mm) Uni-seal stems
• 1 - No. 271 (6mm) carbide cutter
• 1 – No. TRT105 measure tool
• 1 - No. 704A Rub-O-Matic aersol
• 1 - No. 738 Security Coat
• 1 – No. 760 Chemical vulcanizing uid
• 1 - No. S1032 Air Buffer Low Speed
• 1 - No. S1041 Quick Change Adaptor for271 Carbide Cutter
• 1 - No. S1041/37 Quick Change Adaptorfor 271/38 Carbide Cutter
• 2 – No. S1046 Quick Change Adaptor forS893 and RH102
• 1 – No. S892 75mm soft wire brush
• 1 – No. RH102 Rubber hog ared bufngwheel
• 1 – No. 911 allen wrench for quickchange adaptors
• 1 – No.912 allen wrench for air tools• 1 - No. 913 slip joint pliers
• 1 - No. 915 spiral cement tool
• 1 – No. 919 pointed awl
• 1 - No. 933 rubber scraper
• 1 - No. 936 3mm stitcher
• 1 – No. 940 skiving knife
• 1 Box – No.951 white paint sticks12 pack
• 1 No. UVEXB blue safety glasses
• 1 – No. S923 safety glasses
• 1 – No. 170TM repair template for 170
• 1 – No. 111TM repair template for 111
• 1 – No. RM-5 repair manual
No. 896 TRUCK NAILHOLE REPAIR KIT, A complete kit for road service and repairingnail holes in both radial and bias tyres. with tool box, contains:
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 27/96
Page
27www.repcotrp.com.au
TYRE REPAIR PRODUCTS
Tyre Repair Spotters
MEDIUM TRUCK TYRE VULCANIZER
The all-new Model MT air-operated vulcanizer is the latest generation in
repair equipment. Now repair the tread, shoulder, and sidewall areas ofmedium-sized (8:25 through 12:00) truck tyres with one vulcanizer.
• Patented piston/pad air head produces professional-looking sidewall
repairs that are unequalled in the industry.
• Tread and shoulder areas are solidly repaired with constant pressure
provided by contour plates and a.spring - loaded compensating system.
• Heat from both sides of tyre offers maximum repair efciency.
• Optional stand (T031) supports tyre on roller assembly for easy rotation.
Horzontal orientation of spotter makes alignment with repair easy and
eliminates stress from repair area
• For proper operation Contour plate set T155 contains 5 plates (T086,
T087, T130, T131, T134) is required.
• 240 volt.
SPECIFICATIONS
Shipping weight: 52 lb. 23 kg.
Shipping volume: 2 cu ft. 60.96 cu.cm
Curing head size: 6 in. 15 cm.
No. curing heads: 3 ea. 3 ea.
Throat depth: 8 in. 21 cm.
Throat height: 19 in. 48 cm.
PARTS BREAKDOWN
Part No. Model Description
T192 Detent pin
T226 Frame
T227 Plunger
T228 Spring
T229 Inside heat unit extension
shaft
T230 Telescoping assembly
T057 AS4-16 Contour up silicone rubber
heat pad (6” diameter)
T060 AS3-20 Heat units- 4” (2)
T063 AS5-6 Silicone rubber seal(6” diameter)
T064 AS6-20 Steel air cylinder with
contoured lip
T121 AS11 Detachable electrical cord
for T057
T277 Air hose with fittings
T280 Panel Mount Air Gauge
T281 Circuit Breaker
T274 Humphrey Valve
T220 Pilot Light
T119 AS9 Regulator Low pressure
T145 Thermostat for 4” HU
T125 Element for 4” HU
T032 1 Hour Timer
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 28/96
www.repcotrp.com.auPage
28
TYRE REPAIR PRODUCTS
Tyre Repair Spotters
AIR-OPERATED TRUCK Tyre VULCANIZER
THE ULTIMATE FLEXIBILTY IN Tyre REPAIR
The 2000 Vulcanizer is the only spotter in the market that handles tread,shoulder, and sidewall repairs on all kinds of
tyres-from low profile to super singles. It will handle future
tyre sizes by simply changing contour plates.
• Patented piston/pad system for expert repairs - even by novice operators.
• Inside - outside heat system.
• Spring loaded mechanical pressure, with solid heat units for tread and
shoulder repairs.
• No expensive air bags to replace - air system replacment costs, on average,
less than 30 cents per cure.
• Optional large-capacity Model TS stand (T033) supports both tyre and
vulcanizer with dual 16” rollers for easy tyre rotation.
• Optional plate package (T156) contains 9 plates, T086, T087, T130, T131, T132,
T133, T134, T135, T136 which fit Vulcanizer 2000 (T026)
• 240 volt
SPECIFICATIONS
Shipping weight: 74 lb. 30 kg.
Shipping volume: 3.84 cu. ft. 108 ltr.
Curing head size: 6 in. 15 cm.
No. curing heads: 3 ea. 3 ea.Throat depth: 11-1/2 in. 29 cm.
Throat height: 24-1/2 in. 62 cm.
PARTS BREAKDOWN
Part No. Model Description
T057 AS4-16 Contoured silicone rubber
heat pad (6” diameter) with
electrical connection
T060 AS3-20 Solid heat units
T063 AS5-6 Silicone rubber air seal
(6”diameter)
T064 AS6-20 Steel air cylinder withcontoured lip
T121 AS11 Detachable electrical cord
for T057
T156 Contour Plate Package
T192 Detent pin
T227 Plunger
T228 Spring
T229 Extension shaft
T239 Frame
T240 Telescoping assembly
T277 Air hose with 2 fittings
T119 AS9 Air regulator
T220 Pilot Light
T277 Air hose w/fitting
T274 Humphrey Valve
T280 Panel Mount Air Gauge
T281 Circuit Breaker
T145 Thermostat for 4” HU
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 29/96
Page
29www.repcotrp.com.au
TYRE REPAIR PRODUCTS
Monaflex Repair Systems
OTR TYRE REPAIR SYSTEM
For Vulcanisation of Repairs in the
tyre range 1300 to 55.5/85-63 OTR
including low profile Radial and Cross
Ply Tyres 14.4-24 to 65/45 -45 Tractor
Benefits and Features
• A small Monaex System can be purchased initially and then extended when required
to cover up to 55.5/85-63 sections.
• Flexible rubber heat pads and airbags conform to the prole of Radial, cross ply, wide
base, low profile and skidder/ floatation tyres to provide distortion free repairs.
• Inside and outside heat and pressure vulcanise patch and plug in one operation to
provide first class cures with maximum patch adhesion.
• Handles up to a 28” x 28” cross ply patch and a 35” x 10” radial patch (Components to
cover larger patch sizes can be supplied on request)
• The elastic window incorporated in air bag covers allow the air bag to expand further
into the sidewall areas of the tyre ensuring even pressure over the patch area.
• Control panel tted with digital temperature displays, timer self-relieving air
differential control, air gauges and fail safe features.
• Maximum of 45psi air pressure required.
• Portable and lightweight for easy transportation.
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 30/96
www.repcotrp.com.auPage
30
TYRE REPAIR PRODUCTS
Monaflex Repair Systems
BEAD REPAIR SYSTEM
For repair of Radial Truck Tyres in the tyre size rangeFrom 8.25 to 1200 x 24 Including low profile and super single
Benefits and Features
• One system for all tubeless truck tyres.
• Ideal for tyre manufacturers, re-treaders and repair shops.
• Extremely easy to operate with assembly taking less than one minute
• Provides even inside and out heat and pressure to repair area.
• First class distortion free repairs every time.
• Minimal bufng required for perfect repairs.
• Compact and very lightweight allowing for greater portability.
SIDEWALL REPAIR SYSTEMFor the repair of Truck Tyres in the size range
From 8.25 to 1200 x 24 Including low profile and super single
Benefits and Features
• Designed for radial sidewall repairs and limited cross ply up to 6”patch.
• One unit for all tyre sizes in range.
• Easy to operate with assembly on tyre taking 30 seconds.
• Provides even inside and out heat and pressure to repair area.
• Vulcanises patch and plug in one operation.
• First class distortion free repairs every time.
• Space saving design-completely portable
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 31/96
Page
31www.repcotrp.com.au
WORKSHOP TOOLS
TECH Storage Cabinets and Professional Repair Tool Station
TECH 100 LOCKING REPAIR CABINET
TECH 400 STORAGE CABINET
TECH 500 PROFESSIONAL REPAIR TOOL STATION
Cat. No. Description
100 The new Tech 100 Tyre Repair Cabinet has been redesigned to
better organize and secure all of the Tech recommended products
for proper tyre repair. The cabinet features double locking front
doors with Tech Tyre repair logos on the exterior, wider and tallershelves for increased repair storgae capacity, and an additional
exterior shelf with 4 cutouts for air tool storage.
TOOLS AND REPAIR MATERIALS SOLD SEPARATELY.
Dimensions 30” x 24” x 11.5” (760mm x 610mm x 295mm)Weight: 12.45kgsInner Door Labeled Tool Bars store:
•1 – No. TRT105 measure tool •1 - No. 933 rubber scraper •1 – No. RH140 contour wheel •1 – No. 269, 270 & 271 Carbide Cutters •1 – No. S893 40mm texture brush •1 – No. 910 cement tool •1 - No. 973 Diagonal Side Cutting Pliers •1 - No. 938 stitcher
Cat. No. Description
400 The new Tech 400 Tyre Service Cabinet features 2 inner shelves
for the tyre repair material storgage and 2 pull out drawers
sectioned off for valve hardware storage. The double front doors
are 65mm deep with inner shelves to store tyre repair chemicalsand tools.
TOOLS AND REPAIR MATERIALS SOLD SEPARATELY.
Dimensions 22.5” x 21” x 10.25” (575mm x 535mm x 260mm)
Weight: 13.15kgs
Cat. No. Description
500 Tech’s 500 repair station is recommended for any full service
repair facility. This tool organizer neatly stores all of the recom-
mended knives, buffing rasps and wheels, texture brushes,
encapsulated brushes, carbide burrs, and aluminum oxide stonesfor the full range of radial and bias tyre repairs. Repair templates
or chemicals can be stored inside. The box now comes assembled
with optional air tool hanging bracket and mounted hardware
included.
TOOLS AND REPAIR MATERIALS SOLD SEPARATELY.
Dimensions 15” x 12” x 12”
Weight: 4.8kgs
100
400
500
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 32/96
www.repcotrp.com.auPage
32
WORKSHOP TOOLS
TECH
Hand Tools for Tyre Repair
STITCHERS AND SCRAPERS
INSERT & SPIRAL TOOLS
MISCELLANEOUS TYRE REPAIR TOOLS
AWLS AND PACKING TOOLS
Tech tools and accessories are made of the highest quality materials and aredesigned to make your tyre repair job easier and faster.
Cat. No. Description
933 Rubber Scraper
935 Stitcher /Buffer
936 Stitcher 1 1/2”,38mm x 1/8”, 3mm
938 Stitcher 1 1/2”,38mm x 1/32”, 0.8mm
939 Stitcher 2”,50mm x 1/4”, 6mm
Cat. No. Description
913 SLIP JOINT PLIERS, 8”, 200mm
973 DIAGONAL PLIERS, 6”, 150mm
931 WIRE BUFFER for rim/battery terminal
966 WHITE WALL CLEANING BRUSH with brass bristles
974 INNERLINER BRUSH with stainless steel bristles
Cat. No. Description
918 DUCK BILL AWL, 4”, 100mm length
919 POINTED AWL, 8”, 200mm length
985 SKIVE PACKING TOOL, 2”, 50mm x 1/4”, 6mm
986 SKIVE PACKING TOOL, 2”, 50mm x 3/8”, 10mm
987 SKIVE PACKING TOOL, 3 1/2”, 90mm x 3/8”, 10mm
Cat. No. Description
900 INSERT TOOL, 3”, 75mm
901 INSERT TOOL, 6”, 150mm
905 HEAVY DUTY INSERT TOOL, 9”, 225mm
915 SPIRAL TOOL
916 GIANT SPIRAL TOOL
900
901 905
915
916
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 33/96
Page
33www.repcotrp.com.au
TYRE REPAIR PRODUCTS
TECH Tyre Repair
Chemicals
TECH VULCANIZING FLUIDS
TECH VULCANIZING FLUIDS
TECH CHEMICALS
*All tubes of Tech Chemical Vulcanizing Fluid come packaged in self-merchandising display cartons. Sold in full box quantities of 24 only.
Cat No. Description
760 CHEMICAL VULCANIZING FLUID, 8oz., 235ml can
with brush
761 CHEMICAL VULCANIZING FLUID, 1 qt., 945,ml can
765* CHEMICAL VULCANIZING FLUID, 50ml tube, box 24
766* CHEMICAL VULCANIZING FLUID, 20ml tube, box 24
767* CHEMICAL VULCANIZING FLUID, 10ml tube, box 24
770 FLOW SEAL VULCANIZING FLUID, 7oz., 205mlwith flip top dispenser
Cat No. Description
775 HEAVY DUTY BLUE VULCANIZING FLUID, 8oz., 235ml can with brush
776 HEAVY DUTY BLUE VULCANIZING FLUID, 1 qt., 945,ml can
1082 TEMVULC brush type vulcanizing and retread cement for heat
vulcanizing applications. 1 qt., 945ml can.
Also available in 1 and 5 gallon.
968LB ALUMINUM CEMENT DISPENSER with long brush, 1 qt. , 945ml
968B REPLACEMENT LID AND BRUSH for 968LB
Cat No. Description
738 SECURITY COAT overbuff inner liner sealant., 16 fl.oz., 470ml
739 BUTYL LINER REPAIR SEALER, 32 oz., 945ml can with brush cap
706-1 Tyre TALC, 1 lb., 0.5kg
751 TECK-CHEK concentrate, 1 qt., 945ml bottle
969 SPRAY BOTTLE, 16 oz., 470ml
Tech Chemical vulcanizing Fluid and Rub-O-Maticcontain no CFC,s and are more enviromentally friendly than chemicals with CFC,s. Rub-O-Matic removescontamination from the inner liner quickly and easily.Tech,s Atomizer is a refillable, rechargeable sprayerwhich uses clean, dry air as the propellant for Techchemicals. Fast-drying Tech Chemical Vulcanizing Fluidcures tyre and tube repairs with or without heat.
Heavy Duty Blue Vulcanizing Fluid is an extra thickvulcanizing fluid for hot or cold applications. This formulaworks well with single coat coverage when applyinglarge bias or radial repairs in tubeless or tube -type tyres,and for any hard gum repair applications. Tech offersboth solvent-based and water -based inner liner repairsealants, which restore overbuff areas on tubeless tyreinner liners. Tech-Chek concentrate detects hard to
locate leaks.
767
968LB
776
1082
968B
738
706-1
751
969
775
770
760
761
766765
RUB-O-MATICCat No. Description
704 RUB-O-MATIC, 1qt. 945ml can
704A RUB-O-MATIC, in aerosol spray can, 11.75oz., 336g
704G RUB-O-MATIC, 1 gal,. 3.8 liter can
704C TECH CITRUS-BASED RUBBER CLEANER, 945ml can
975 ATOMIZER, 453.6g refillable sprayer704G975
704
704A
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 34/96
www.repcotrp.com.auPage
34
TYRE REPAIR PRODUCTS
Mounting Compounds
Tyre Dressings
Rim EaseTM Tyre Mounting Lubricant has improved lubrication for easier tyremounting/demounting applications. Lubricates entyre wheel to provide betterfit between tyre and rim. Contains no silicone or petroleum solvents. Excellentlubricant for expandable hubs. Rust inhibitor added.
Tyre and Tube Mounting Compound is an excellent bead pack and lubricant.Rust inhibitor added.
Cat. No. DESCRIPTION
720 RIM EASE TM Tyre MOUNTING LUBRICANT for all tyres 1 Gallon
720-5 RIM EASE TM Tyre MOUNTING LUBRICANT for all tyres 5 Gallon
721 MOUNT-O-MATIC concentrate, use mixed with water, 1 pt., 475ml
722 Tyre AND TUBE MOUNTING COMPOUND, 8 lb. , 3.63kg with
rust inhibitor
723 HEAVY DUTY Tyre AND TUBE MOUNTING COMPOUND 25LB
725M MURPHY’S BLACK Tyre AND TUBE MOUNTING COMPOUND 25lb
783-5E MOUNTING/DEMOUNTING PASTE, 5KG bucket
964 SWAB, cotton, 15”, 375mm length
971 ANGLED LUBE BRUSH for application of Cat. No. 783-5E
Cat. No. DESCRIPTION
AWS1 AEROWAX Tyre mounting wax 1KG TUB
AWS5 AEROWAX Tyre mounting wax 5KG TUB
45040 WD 40 Lubricant 4 litre
42000 Spray Applicator Picture with 45040
Cat. No. DESCRIPTION
M805 COPATEC ANTISEIZE 500g
Cat. No. DESCRIPTION BOX QTY
745 SOAP HAND WIPES / TOWELS
60 - 9” x 12” pre-moistened towels
1
743 TECH SOY HAND CLEANER - SOY 1
743SP TECH SOY HAND CLNR STARTER KIT 1
Cat. No. DESCRIPTION
SUPREME TYREBLACK
Tyre Black Water based 20 Litre
110006 Castrol Tyre Treat 20 Litre
Tyre Shine Tyre dressing 20 Litre
All natural, concentrated, solvent free cleansing formula.
Soybean oil based.
100% biodegradable.
Fortified with an antimicrobial agent.
Antiseptic ingredient, chloroxylenol and conditioners for maximum
skin protection. Fibril scrubbers for extra cleansing power.
Exfoliates naturally.
743SP 743 745
720720-5 723
783-5E
AWS5 4504042000
SUPREME TYRE BLACK110006
M805
964971
721
722
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 35/96
Page
35www.repcotrp.com.au
TECH Tyre Sealant
TECH Tyre Balancing Compound
TECH TYRE SEALANT
TECH TYRE BALANCING COMPOUND
TYRE REPAIR PRODUCTS
Tech Tyre Seal effectively seals injuries caused by puncturing objects up to 3/16”, 5mm in size in alloff road applications. Works in tube-type and tubeless tyres. Remains effective for the life of the tyre. Tech tyre sealants are biodegradable and water soluble. Maintenance expenses caused byequipment downtime due to flats or hard to find leaks are reduced.
Dry tyre balancing compound materials have been in the market for yearsnow, but only Tech Tyre Balancing Compound has superior flow ability anddurability. Tiny micro beads are specially coated to minimize friction whileother ingredients coat the tyre’s inner liner, keeping it smooth and dry. As the tyre begins to roll, these micro beads move and adjust on the inside of the tyre
to offset the heavy spot or any variation in the sidewall stiffness.Simply place the insert bag inside the tyre during mounting and the tyre andwheel assembly will be balanced throughout the tyre,s life. Tech,s BalancingCompound effectively balances light truck (TL series). Medium truck (TMseries). Duplex tyres (TP series). and 4x4 mudder tyres, eliminating the needfor fixed weights and re-balancing.
All sizes are packaged in Insert bags that decompose inside the tyre andinclude a filtered valve core. The Tech applicator can be used for installationin mounted tyres. The applicator includes an air drying filter and pressuregauge to ensure proper inflation.
Cat No. Description
707HD TECH PREMIUM Tyre SEALANT, 2.1/2 gal., 9.5L container
707HD-5G TECH PREMIUM Tyre SEALANT, 5 gal., 19L container
708HD TECH PREMIUM Tyre SEALANT, 32 oz, 950ml bottle, 12/case
709HD TECH PREMIUM Tyre SEALANT, 16 oz, 470ml bottle, 12/case
711 HANDPUMP for 2.1/2 gal. , 9.5L & 5 gal. , 19L containers
714 8 oz. , 235ml “INNER SEAL” PREMIUM Tyre SEALANT , 12/case
*Application chart available. Ask your Tech Tyre Products representativeor contact Tech Tyre Products Pty Ltd atwww.techtyreproducts.com.au.
Cat.No.
Description Nom. Wt. Qty/ case
TLP60 Primarily for commercial, sports
utility and 4 x 4 light truck tyres
2.1 oz. / 60g 48
TL100 3.5 oz. / 100g 36
TL150 4.1/2 oz. / 130g 36
TL200 6 1/2 oz. / 185g 24
TL250 8 1/2 oz. / 240g 24
TM300 For Balancing all standard and
low-profile medium truck tyrescan be used for wide base tyres.
10 1/2 oz. / 300g 20
TM400 13 oz / 370g 12
TM500 16 oz / 455g 12
TP6000 A more enconomical way of
balancing wide base tyres thanusing 2 packets from the TM
series
21 oz. / 600g 6
TP7000 23 1/2 oz / 670g 6
TP9000 29 oz / 825g 1
Micro Beads
Balancing compound also sold in single bags.
707HD-5G
714
711
707HD
708HD709HD
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 36/96
www.repcotrp.com.auPage
36
TYRE REPAIR PRODUCTS
TECH Rope Rubber
TECH Vul-Gum
VUL-GUM CUSHION GUM
VUL-GUM STRIPPING STOCK
TECH ROPE RUBBER
Tech TRR and LRR rope rubber are produced with a high quality natural rubber compound whichprovides excellent extrusion and workability, maximum adhesion to the tyre, and outstanding wearand weather resistance. Tech rope rubber is packaged in 15 pound plastic pails for maximumprotection during transport and storage
Tech TRR and LRR rope rubber are produced with a high quality natural rubber compound whichprovides excellent extrusion and workability, maximum adhesion to the tyre, and outstanding wearand weather resistance. Tech rope rubber is packaged in 15 pound plastic pails for maximumprotection during transport and storage
Cat No. Description Specifications PkgQty
LRR ROPE RUBBER 3/8”
(10mm) diameter forsidewall applications
RMA Cure Class 20C , Shore
Hardness 60+/-3. Tensile2700 minimum Module 800
minimum Elongation 400
minimum
15 lbs,
6.8kg
TRR ROPE RUBBER 3/8”(10mm) diameter for
tread applications
RMA Cure Class 20C , ShoreHardness 65+/-3. Tensile
2700 minimum Module 1100
minimum Elongation 450
minimum
15 lbs,6.8kg
13000 EXTRUDER GUN 220V 1
S2655 6mm EXTRUDERRUBBER
Per KG
Cat No. Gauge & Width(mm / inches)
Weight / roll (kg / lb)
Rolls / box
849 6 x 150 / 1/4 x 6 4.5 / 10 1
850 3 x 150 / 1/8 x 6 4.5 / 10 1
862 3 x 475 / 1/8 x 19 6.8 / 15 1
867 1.5 x 475 / 1/16 x 19 6.8 / 15 1
868 0.8 x 475 x 1/32 x 19 6.8 / 15 1
869 3 x 750 / 1/8 x 30 6.8 / 15 1
870 1.5 x 750 / 1/16 x 30 6.8 / 15 1
Cat No. Gauge & Width(mm / inches)
Weight / roll (kg / lb)
Rolls /box
855 0.4 x 40 / 1/64 x 1 1/2 0.5 / 1 5
861 3 x 25 / 1/8 x 1 0.9 / 2 9
863 1.5 x 25 / 1/16 x 1 0.9 / 2 9
864 1.5 x 50 / 1/16 x 2 1.8 / 4 4
865 1.5 x 75 / 1/16 x 3 2.7 / 6 3
866 1.5 x 100 / 1/16 x 4 3.6 / 8 2
13000
TRR
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 37/96
Page
37www.repcotrp.com.au
TECH Fabric Reinforced Rubber
TECH Butyl Gum & Chemical Cure Rubber
TECH A & B Compound
FABRIC REINFORCED RUBBER CUSHION GUM
HEAT CURE INNER LINER REPAIRGUM
A & B COMPOUND TWO-PART CHEMICAL CURE FILLER RUBBER
CHEMICAL CURE INNER LINER REPAIR GUM
CHEMICAL CURE STRIPPING STOCK
TYRE REPAIR PRODUCTS
CatNo.
Description Gauge & Width(mm / inches)
Weight / roll (kg
/ lb)
Rolls / box
BT18 Square woven Nylon 1.5 x 425 / 1/16 x 19 11.5 / 25 1
BN18 1 Ply Nylon Cord 0.8 x 425 / 1/32 x 19 11.5 / 25 1
TCG 1 Ply Nylon Cord 0.8 x 660 / 1/32 x 26 11.5 / 25 1
Cat No. Description Gauge & Width(mm / inches)
Weight / roll (kg / lb)
Rolls / box
BTLG-125/10# Butyl Gum 0.8 x 425 / 1/32 x 19 4.5 / 10 1
CatNo.
Description Gauge & Width(mm / inches)
Weight / roll (kg / lb)
Rolls / box
854 Gray Chemical Gum 0.4 x 25 / 1/64 x 1 0.5 / 1 5
Cat No. Description Gauge & Width(mm / inches)
Weight / roll (kg / lb)
Rolls / box
GH100 Chemical Cushion
Gum
0.8 x 150 / 1/32 x 16 2.72 / 6 1
GH200 Chemical CushionGum
0.8 x 225 / 1/32 x 9 5 / 11 1
GH218 Chemical Cushion
Gum
0.8 x 450 / 1/32 x 18 5 / 11 1
Cat No. Description
858 A & B COMPOUND, set of two 0.5kg, 1 lb. cans
859 A & B COMPOUND, set of two 0.9kg, 2 lb. cans
858859
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 38/96
www.repcotrp.com.auPage
38
TYRE REPAIR PRODUCTS
TECH Knives,
Extruder Guns& Branding Irons
Tech tools and accessories are made of the highest quality materials and are designed to make your tyre repair job easier and faster. Tech also offers a complete line of air buffers and accessories.Tech extruder guns are designed to fill a wide range of injuries quickly and easily without trappingair. Perfect for section repair build-up and for filling skives. Extruder guns are compact, lightweightand user friendly. Tech electric knife heater is ideal to heat rubber cutting knives, shears and small tools that require heat for efficient operation. The accompanying heater knife comes with an 8”,200mm blade for fast, easy trimming and cutting of rubber. The tyre brander allows retreaders and tyre technicians to quickly and easily brand tyres for proper identification. 1” letters & numbers are
available for use with the brander.
SKIVING KNIVES & SCISSORS
Cat No. Description Pkg Qty
940 X2T TAPER SKIVING KNIFE 1
941 X1Y EXTRA CURVE SKIVING KNIFE 1
942 X3N ROUND POINT FLEXIBLE SKIVING KNIFE 1
SS10 HEAVY DUTY RETREAD SCISSORS 5”, 125mm
CUT
1
RETREAD TOOLS & ACCESSORIES
Cat No. Description Pkg Qty
469 KNIFE HEATER WITH Adjustable tempature
230V
1
467 ELECTRIC KNIFE HEATER 230V 1
45-741 TYRE BRANDER 1” Built in numbers 1
469
46745-741
TECH EXTRUDER GUNS
Cat No. Description Pkg Qty
S180 NAILHOLE REPAIR EXTRUDER GUN 220V 1
13000 STANDARD EXTRUDER GUN 220V 1
13004 EM EXTRUDER GUN 220V. ELECTRIC 1
S180
13000
AIR TOOLS & RETREAD TOOLS
Cat No. Description Pkg Qty
S999 QUICK SPIFF AIR POWERED VACUUM, Self
contained one piece vacuum comes with 16”,
400mm hose, 3”, 75mm dust brush and 9”,
225mm crevice tool
1
BG5002 Air Blow Gun 1S999
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 39/96
Page
39www.repcotrp.com.au
TECH Tyre Inspection Marking Tools
TECH Worker Safety & Protection Items
MARKING CRAYONS, PAINT STICKS & MARKING PEN
REPAIR LIGHT & EYE PROTECTION
LATEX, NITRILE AND STRONGHOLD GLOVES
TYRE RETREADING
Cat No. Description
MARKALL W MARKAL WHITE B-PAINT STICK, 12 per box
MARKALL Y MARKAL YELLOW B-PAINT STICK, 12 per box
951 WHITE PAINT CRAYON, 12 per box
949 CRAYON HOLDER, designed to fit Tech’s hex tyre paint
marking crayons
SIP SILVER INK PEN, 12 per box
Cat No. Description
BB LIGHT FLUORESCENT REPAIR LIGHT, 220V only, 25 ft, 7.5m power cord
S921 COMPLETE FACE SHIELD
S923 SAFETY GLASSES
S924 GREY SHADED SAFETY GLASSES
Cat No. Description UOM
NINJA GLOVES NINJA GLOVE PVC FOAM COATED PAIR
NINJA XL NINJA GLOVE PVC FOAM COATED
X LARGE
PAIR
QFR LARGE RINGER GLOVES LARGE PAIR
QFR X LARGE RINGER GLOVES X LARGE PAIR
CONTEGO GLOVES CONTEGO RIGGER GLOVES PAIR
236688 T28 TOWELLING GLOVES PAIR
236671 Drivers/Riggers PAIR
NINJA QFR
CONTEGO
236688 236671
949
SIP
BB LIGHTS921
S923
S924
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 40/96
www.repcotrp.com.auPage
40
PINCOTT RASP BLADES, HUBS
ROBBINS ENVELOPES
Retreading
TYRE RETREADING
CODE DESCRIPTION UOM BOX QTY
P-6 3 Dia. Circle Blade” EACH 50
P3-20 Rasp Blade EACH 50
R115-25 11.1/2 Dia.5 Seg Rasp Blade” EACH 50
R4-9 Rasp Blade EACH 50
R4-16 9inch 4 Segment Rasp Blade EACH 50
R4-20 9 Dia.4 Segment Rasp Blade” EACH 50
R4-20U RASP BLADE SUIT SATURN 11 EACH 50
R4-25 9 Dia.4 Segment Rasp Blade” EACH 50
SMART 1 Rasp Blade EACH 50
SMART 11 Rasp Blade EACH 50
ULTRA 11 9 Dia.4 Segment Rasp Blade” EACH 50
CODE TYRE SIZE UOM BOX QTY
3111 700R16, EACH 2
3211 235/85R16 EACH 2
3211 8.25R15 EACH 2
3211 9.5R17.5 EACH 2
3213 215/75R17.5 EACH 2
3511 825R16 EACH 2
3513 265/70R19.5 EACH 2
3812 305/70R19.5 EACH 2
3816 235/80R22.5 EACH 2
4012 900R20 EACH 2
4014 10R22.5 EACH 2
4213 10.00R20 EACH 2
4214 295/70R24.5 305/70R22.5 / 305/75R22.5 EACH 2
4215 11R22.5 EACH 2
4215 295/80R22.5 EACH 2
4413 12.00R20 EACH 2
4415 385/65R22.5 EACH 2
4416 315/80R22.5 EACH 2
4814 445/65R22.5 EACH 2
P6 • RASP HUBS AVAILABLE
• SPACERS & PINS AVAILABLE
R115/5 Contour
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 42/96
www.repcotrp.com.auPage
42
TYRE REPAIR TOOLS
Wire Brushes & Contour Wheels
WIRE BRUSHES ADAPTORS, CHUCKS AND ACCESSORIES
COPPER CONTOUR WHEELS
Cat. No. Description
RSB3 RADIAL SKIVE BRUSH for quick removal of rubber duringbuzzouts. 3”, 75mm dia., 5000 rpm max. 1/2”, 13mm arbor
hole with 3/8”, 10mm reducer. (not shown)
S890 POLYURETHANE ENCAPSULATED BRUSH to remove rubberaround steel cables. 2”, 50mm, 5000 rpm max. 1/2”, 13mm
arbor hole with 3/8”, 10mm reducer
S891 POLYURETHANE ENCAPSULATED BRUSH to remove rubber
around steel cables. 3”, 75mm, 5000 rpm max. 1/2”, 13mmarbor hole with 3/8”, 10mm reducer
S892 TEXTURE BRUSH removes scorched rubber in finishedbuzzouts.Contains 2–3”, 75mm brushes and 2–2”, 50mm flat
washers to keep . bristles firm. 5000 rpm max.
S893 SOFT WIRED TEXTURED BRUSH textures rubber in small
buzzouts.Also, an ideal tool to texturize along cables in
section repairs. 11/2”, 40mm
S894 RIM CLEANING BRUSH, 2”, 50mm. 5000 rpm max.
S896 SKIVE BRUSH removes scorched rubber in skived area.1/2”, 13mm, 005 wire. 4000 rpm max.
S897 RUBBER ENCAPSULATED BRUSH to remove rubber sur-
rounding steel cables. 2”, 50mm. 5000 rpm max. 3/8”, 10mmarbor hole.
S898 RUBBER ENCAPSULATED BRUSH to remove rubber sur-
rounding steel cables. 3”, 75mm. 5000 rpm max. 3/8”, 10mm
arbor hole.
Cat. No. Description
S1010 DRILL CHUCK AND KEY for all Tech air buffers and dril l
S1040 QUICK CHANGE ADAPTOR for No. 270 and No. 270P carbide cutters.For use in S1045 quick change chuck.
S1041 QUICK CHANGE ADAPTOR for No. 271 and No. 271Pcarbide cutters.
For use in S1045 quick change chuck.
S1041/38 QUICK CHANGE ADAPTOR designed to accept a No. 271/38 and No.272 carbide cutter. (not shown) Use 912 Allen Wrench for tightening.
(not shown)
S1043 1/8” QUICK CHANGE ADAPTOR permits use of tools with 1/8”, 3mmshank to be adapted to S1045 chuck.
S1044 1/4” QUICK CHANGE ADAPTOR permits use of tools with 1/4”, 6mm
shank to be adapted to S1045 chuck.
S1045 QUICK CHANGE CHUCK used with S1040–S1047XL for fast, easy
removal of buffer accessories. For all Tech air buffers and drill.
S1046 QUICK CHANGE SHORT ADAPTOR 3/8”, 24 thread. One flat washer,one nut included. 1/2”, 13mm thread length.
S1046D QUICK CHANGE ADAPTOR for RSB-3 brush (not shown)
S1047 QUICK CHANGE LONG ADAPTOR3/8”, 24 thread. One flat washer, one
nut included. 1”, 25mm thread length.
S1047XL QUICK CHANGE EXTRA LONG ADAPTOR3/8”, 24 thread adaptor. 13/4”, 45mm thread length. Two nuts and
one flat washer included. For rasps, buffing wheels and brushes
where extra length is required.
S1048 DRILL CHUCK LONG ADAPTOR 23/4”, 70mm, 3/8”, 24 thread. Two nutsincluded. For use with S1010 drill chuck.
Cat. No. Description
TCW210 Copper contour wheel 50 x 25 36 Grit
TCW210/16 Copper contour wheel 50 x 25 16 Grit
TCW315 Copper contour wheel 76 x 38 16 Grit
TCW415 Copper contour wheel 102 x 38 16 Grit
CAUTION: Always wear eye protection. CAUTION: Always wear eye protection.
TCW 315 TCW 310 TCW 210TCW 415
S891
S890
S892
S894
S893
S896
S897
S898
S1010S1045
S1040
S1047 S1047XL S1048 S1049
S1041 S1043 S1044 S1046
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 43/96
www.repcotrp.com.auPage
43
RUBBER HOG
TYRE REPAIR TOOLS
CAT NO. DESCRIPTION DIAMETER WIDTH HOLE BOX
QTY
RH102 2 X 3/4 CONTOUR WHEEL
(170SSG)
2", 50mm 3/4", 20mm 3/8", 10mm 1
RH104 2 X 3/4 CONTOUR WHEEL
(230SSG)
2", 50mm 3/4", 20mm 3/8", 10mm 1
RH107 FLARED CONTOUR WHEEL170SSG
2 1/2", 65mm 1", 25mm 3/8", 10mm 1
RH109 FLARED CONTOUR WHEEL
230SSG
2 1/2", 65mm 1", 25mm 3/8", 10mm 1
RH111 FLARED CONTOUR WHEEL
390SSG
2 1/2", 65mm 1", 25mm 3/8", 10mm 1
RH120 FLARED CONTOUR WHEEL
230SSG
3 1/2", 90mm 1 1/2", 40mm 1/2", 13mm 1
RH122 FLARED CONTOUR WHEEL390SSG
3 1/2", 90mm 1 1/2", 40mm 1/2", 13mm 1
RH140 CONTOUR WHEEL MINI PREP
SSG 170
1 1/4”, 30mm 3/8”, 10mm 1
CAT NO. DESCRIPTION DIAMETER WIDTH HOLE BOX
QTY
S2000 ROUND FACE RASPS - 16 GRIT 1/4", 6MM 3/8" 24 THREAD 2", 50 MM 1
S2001 ROUND FACE RASPS - 36 GRIT 1/4", 6MM 3/8" 24 THREAD 2", 50 MM 1
S2002 ROUND FACE RASPS - 16 GRIT 1/2", 13MM 3/8" 24 THREAD 2", 50 MM 1
S2003 ROUND FACE RASPS - 36 GRIT 1/2", 13MM 3/8" 24 THREAD 2", 50 MM 1
S2004 ROUND FACE RASPS - 16 GRIT 3/4", 20MM 3/8" 24 THREAD 2", 50 MM 1
S2005 ROUND FACE RASPS - 36 GRIT 3/4", 20MM 3/8" 24 THREAD 2", 50 MM 1
CAT NO. DESCRIPTION BOX
QTY
S2006 PENCIL RASPS - 16 GRIT 1
S2007 PENCIL RASPS - 36 GRIT 1
S2008 TAPERED CONE RASPS - 16 GRIT 1
S2009 TAPERED CONE RASPS - 36 GRIT 1
S2010 TAPERED CONE RASPS - 16 GRIT 1
CAT NO. DESCRIPTION BOX
QTY
S2040 2" GOUGE 1/2" A.H. THICK WALL 1
S2042-12 2" ROTARY GOUGE-NO NOTCH 1/2"H 1
S2045 1 1/4" GOUGE 3/8" AH 3 PK 3
RH107
S2000
CAT NO. DESCRIPTION BOX
QTY
S2020 CONTOUR CUPS - 36 GRIT 1S2020
S2006
S2008
S2045
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 44/96
www.repcotrp.com.auPage
44
TYRE VALVES
PASSENGER TUBELESS VALVES
PASSENGER TUBELESS VALVES CHROME
SCOOTER - 2 WHEEL TUBELESS VALVES
TV-003
TV-003C
TV-002 TV-002C TV-018A
W527
A 32.5mm
B 30mm
C 90mm
TR413 CS
TR12008
TV-008 TV-005
** DD = Valves are decored & decapped
CODE ETRTO TR RIM HOLE LENGTH
MM
UOM PACKET
QTY
TV-003 V2-03-01 413 .453” / 11.3mm 42.5 EACH 100
TV-003DD V2-03-01 413 .453” / 11.3mm 42.5 EACH 100
TV-003SP V2-03-01 413 .453” / 11.3mm 42.5 EACH 100
TV-005 V2-03-03 415 .625” / 15.7mm 42.5 EACH 100
TV-008 V2-03-04 418 .453” / 11.3mm 61.5 EACH 100
TV-008DD V2-03-04 418 .453” / 11.3mm 61.5 EACH 100
TV-008SP V2-03-04 418 .453” / 11.3mm 61.5 EACH 100
CODE ETRTO TR RIM HOLE LENGTH MM UOM
TV-003C V2-03-01 413 .453” / 11.3mm 42.5 EACH
TV-008C V2-03-04 418 .453” / 11.3mm 61.5 EACH
TR413 SHORT SLEEVE CHROME SLEEVE SHORT EACH
TR413 CS CHROME SLEEVE LONG EACH
CODE ETRTO TR RIM HOLE LENGTH MM UOM
TV-002 V2-03-06 412 .453” / 11.3mm 33 EACH
TV-002C V2-03-06 412C .453” / 11.3mm 33 EACH
TV-018A V1-11-1 8.3mm EACH
W527 11.5mm EACH
CODE ETRTO TR RIM HOLE LENGTH MM UOM
VH600HP V3-23-1 600 HP .453” / 11.3mm 44 EACH
VH602HP V3-23-2 602 HP .453” / 11.3mm 62 EACH
** For High Pressure application
CAT NO. DESCRIPTION BOX QTY
TR12008 TPMS REPLACEMENT VALVE 1
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 45/96
Page
45www.repcotrp.com.au
TYRE VALVES
CODE ETRTO TR RIM HOLE LENGTH MM UOM
TV-020 V3.21.3 500 .625” / 15.7mm 51 EACH
TV-021 V3.21.2 501 .625” / 15.7mm 38 EACH
TV-025 V3.21.4 570 .625” / 15.7mm 80 EACH
TV-026 V3.21.5 571 .625” / 15.7mm 86 EACH
TV-027 V3.21.6 572 .625” / 15.7mm 95 EACH
TV-028 V3.21.7 573 .625” / 15.7mm 111 EACH
TV-028A V3.21.8 574 .625” / 15.7mm 127 EACH
TV-029 V3.21.1 575 .625” / 15.7mm 29 EACH
INNER MOUNTED TUBELESS VALVES
CODE ETRTO RIM HOLE LENGTH
MM
UOM
TV-010 6mm 39.5 EACH
TV-012 .453” / 11.3mm 62 EACH 90 DEGREE BEND
TV-013S .453” / 11.3mm 38 EACH
TV-013L V1-11-1 .453” / 11.3mm 43 EACHTV-014 .453” / 11.3mm 51 EACH 45 DEGREE BEND
TV-015A Chrome cap EACH
TV-013S TV-013L TV-010 TV-014 TV-012 TV-015A
TR575 TR500 TR501 TR572TR570 TR573TR571 TR574
TUBELESS VALVES FOR TRUCK & BUS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 46/96
www.repcotrp.com.auPage
46
CODE ETRTO RIM HOLE LENGTH
MM
UOM
TV-030 V3.20.1 9.7mm 36 EACH
TYRE VALVES
CODE ETRTO RIM HOLE A B a° UOM
TV-031 V3.20.5 9.7mm 25 40 27 EACH
TV-032 V3.20.7 9.7mm 25 50 27 EACH
TV-033 V3.20.4 9.7mm 25 60 27 EACH
TV-033L 9.7mm 25 80 27 EACH
TV-034 V3.20.8 9.7mm 29 85 12 EACH
CODE TR RIM HOLE LENGTH
MM
UOM
TV-542 542 9.7mm 32 EACH
TV-543 543 9.7mm 59 EACH
TV-544 544 9.7mm 75 EACH
TV-545 545 9.7mm 89 EACH
CODE TR RIM HOLE L a° UOM
TV-040 544D 9.7mm 50 120 EACH
TV-041 543E 9.7mm 35 105 EACH
TV-043 545D 9.7mm 66 120 EACH
TV-543C 543C 9.7mm 35 135 EACH
TUBELESS VALVES FOR TRUCK
TV-033
TV-043
TV-543
TV-030
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 47/96
Page
47www.repcotrp.com.au
TUBELESS VALVES FOR TRUCK
TYRE VALVES
TV-036 V3.13.1 16mm 46 43 89 153 EACH
CODE ETRTO RIM
HOLE
B C D L a° UOM
TV-037 V3.14.2 16mm 45 22 24 91 147 EACH
CODE ALCOA RIM HOLE UOM
TV-046 60MS-27 9.7mm EACH
TV-047 58MS9.7-45 9.7mm EACH
TV-050 70MS-7 9.7mm EACH
CODE ETRTO RIM HOLE A B UOM
TV-035 V3.12.1 16mm 25 40 EACH
TV-046
TV-035
TV-036 TV-037
TV-050
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 48/96
www.repcotrp.com.auPage
48
VALVES FOR TRACTORS
Air/Liquid valve for tractor.
Metal clamp-in bend type.
TYRE VALVES
CODE ETRTO TR RIM HOLE LENGTH MM UOM
VH580A V5.01.1 618A 16mm 48 EACH
2066 V4-02-1 CH3 16mm 36 EACH
BLV601 SNAP IN TRACTOR VALVE 16mm 49 EACH
CODE ETRTO TR RIM HOLE A B a° UOM
VH580 V5-02-1 621A 16mm 39 75 115 EACH
VH582 V5-02-2 622A 16mm 44 116 90 EACH
TV623A V5-02-3 623A 16mm 39 57 115 EACH
VH580A 2066 BLV601
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 49/96
Page
49www.repcotrp.com.au
LARGEBORE VALVES
TYRE VALVES
** Other sizes also available
CODE ETRTO TR RIM
HOLE
A B a° UOM
9011-0 V5-04-1 J650 20.5 27 80 100 EACH
9014-0 V5-04-2 J651 20.5 32 119 90 EACH
9015-0 J652 20.5 27 140 94 EACH
9010-0 J653 20.5 27 63 100 EACH
CODE TR RIM HOLE A B UOM
9022-0 J4000-6 20.5 29 153 EACH
9023-0 J4000-7.1/2 20.5 29 191 EACH
9024-21.5 J4000-21.5” 20.5 29 546 EACH
CODE ETRTO TR RIM HOLE A B a° UOM
9000 V5-10-1 SP2 20.5 EACH
9030-0 V5-03-1 J670 20.5 44 116 90 EACH
9030-0
9000
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 50/96
www.repcotrp.com.auPage
50
TYRE VALVES
LARGEBORE VALVES
CODE TR RIM HOLE A B UOM
WH4502 1/2 J4000-2.1/2 20.5 27.4 63.5 EACH
WH4504 J4000-4 20.5 27.4 101.6 EACH
WH4505 J4000-5 20.5 27.4 127 EACH
WH4506 J4000-6 20.5 27.4 152.4 EACH
WH4508 J4000-8 20.5 27.4 203.2 EACH
WH4518 J4000-18 20.5 27.4 457.2 EACH
WH4524 J4000-24 20.5 27.4 609.6 EACH
WH4526 J4000-26 20.5 27.4 660.4 EACH
WH4528 J4000-28 20.5 27.4 711.2 EACH
HALTEC SWIVEL VALVES
H-41 SP-2 15.8 EACH
H-42 J670-2 38.1 EACH
H-45 J670-3 41.3 EACH
HALTEC VALVES
HALTEC RIGID EXTENSION VALVES
H-41
H-45
CODE HEIGHT UOM
867-3 76.2 EACH
867-4 101.6 EACH
867-6 152.5 EACH
867-12 304.8 EACH
867-16 406.4 EACH
A
B
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 51/96
Page
51www.repcotrp.com.au
LARGEBORE VALVES
TURRET VALVES
Valve Extensions & Clips
CODE DESCRIPTION UOM
T-81 Clamp in Spud can attach any super large bore valve to the rim through a standard valve hole EACH
T-82 Similar to T-81 with an effective length 1/4” longer EACH
R520 Super Large Bore Core Housing EACH
R-525 Swivel connector 90deg angle EACH
T-81 T-82 R-520 R-525
CODE TR ANGLE BEND 1 OFF SET MM HORIZONTAL LENGTH ANGLE BEND 2 UOM
TRJ690 J690 28° 14.3 119.1 28° EACH
TRJ691 J691 18° - 84.1 101.6 EACH
TRJ692 J692 28° 14.3 119.1 18° EACH
CODE DESCRIPTION L UOM
W4025 Texttile braided hose 180mm EACH
W4040 Texttile braided hose 250mm EACH
W4451 holder 16mm EACH
W4455 holder 25mm EACH
W4452 Butterfly Holder holder 25mm EACH
W4451 W4025
TYRE VALVES
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 52/96
www.repcotrp.com.auPage
52
Valve Extensions & Clips
CODE DESCRIPTION L UOM
VE-5102B Metal braided hose 180mm EACH
VE-5103B Metal braided hose 210mm EACH
VE-5104B Metal braided hose 250mm EACH
VE-5105B Metal braided hose 270mm EACH
CODE DESCRIPTION UOM
2027 High Dome Metal Cap Packet 100
2023K1 Black Plastic Cap Packet 100
2023 Red Red Plastic Cap Packet 100
2023 Green Green Plastic Cap Packet 100
CODE DESCRIPTION UOM
32.8501 Rim Hole Plug EACH
VALVES CAPS
LARGE BORE VALVES CAPS & ADAPTORS VALVES CORES
CODE DESC UOM
2019 Large Bore Hex cap Each
2020 Large Bore Split cap Each
1051 Internal Adaptor LB to SB Each
1052 External Adaptor LB to SB Each
CODE DESC UOM
2061 Standard Bore Valve Core Packet 100
2064 Large Bore Valve Core Each
10512019 20612020 20641052
CODE DESCRIPTION UOM
VH1801 Clip On Chuck with 8mm hose barb Open Each
VH691 Ball Foot Clip on Chuck 1/4” Closed End Each
03-0446 Clip On Chuck Straight 1/4” Closed End Each
VH694 Lock on Air Chuck 1/4” Open Each
VH695 Lock on Air Chuck 1/4” Closed Each
VHJ6102 Large Bore Long Lock on Chuck Each
VHJ6105 Large Bore Lock on Chuck Closed Each
VH3216 Tube Deflator Each
AIR CHUCKS VH1801 VH691 VH694 VHJ6105 VHJ6102 VH321603-0446
TYRE VALVES
32.85012027 2023K1 2023 Red 2023 Green
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 53/96
Page
53www.repcotrp.com.au
VALVE EXTENSIONS
VALVE TOOLS
CODE EFFECTIVE LENGTH MM TOTAL LENGTH MM a° UOM
VE-2190 34 40 Each
VE-2160 54 60 Each
VE-2165 78 84 Each
VE-2170 100 115 EachVE-2210 110 125 Each
VE-2212 127 142 Each
VE-2222 34 90 Each
VE-2223 29 45 Each
CODE EFFECTIVE LENGTH MM TOTAL LENGTH MM UOM
VE-2224 107.5 125 Each
VE-2226 132.5 150 Each
CODE DESCRIPTION UOM
VH604 Long Valve Tool Core Remover Each
VH1700 Double Ended Valve Core Remover Each
VH1701 Valve Tool Core Remover Each
VH1703 Double Ended LB / SB Valve Core Remover Each
W1800 Cap and Core Remover Each
VE-2222
VH604 W1800
VH1703
TYRE VALVES
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 54/96
www.repcotrp.com.auPage
54
VALVE TOOLS
CODE DESCRIPTION UOM
VH606 Valve Fishing Tool Each
VH605W 4 Way Valve Repair Tool Each
VH677 Large Bore 4 Way Valve Repair Tool Each
VH672 Lever Mounting Tool Each
VH672P Lever Mounting Tool Poly Each
VH672R Lever Mounting Tool With rubber Proctector Each
CODE DESCRIPTION TR D UOM
2211 TR218 RUBBER BASE VALVE 218A 110mm BOX 5
6214 Plastic Ring Transform TR13 to TR15 Each
CODE ETRTO TR L D UOM
2000 V2-01-01 13 38mm 57mm 11.6mm BOX 10
VH606 VH605W VH672R
TYRE VALVES
2211
6214
2000
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 55/96
Page
55www.repcotrp.com.au
WHEEL WEIGHTS
Australian Wheel Weights
Suit passenger car steel rims with single radius
flange
Cat. No. DESCRIPTION PACK QTY.
000G CAR MIXED PACK 140
005G CAR 05 GRAM PACK 100
010G CAR 10 GRAM PACK 100
015G CAR 15 GRAM PACK 100
020G CAR 20 GRAM PACK 100
025G CAR 25 GRAM PACK 100
030G CAR 30 GRAM PACK 100
035G CAR 35 GRAM PACK 100
040G CAR 40 GRAM PACK 100
045G CAR 45 GRAM PACK 100
050G CAR 50 GRAM PACK 100
055G CAR 55 GRAM PACK 100
060G CAR 60 GRAM PACK 100
070G CAR 70 GRAM PACK 50
080G CAR 80 GRAM PACK 50
113G CAR 110 GRAM PACK 50
LEAD STEEL RIM WEIGHTS
Cat. No. DESCRIPTION PACK QTY.
000448 05 GRAM PACK 100
000449 MIXED PACK 140
000450 10 GRAM PACK 100
000451 15 GRAM PACK 100
000452 20 GRAM PACK 100
000453 25 GRAM PACK 100
000454 30 GRAM PACK 100
000455 35 GRAM PACK 100
000456 40 GRAM PACK 100
000457 45 GRAM PACK 100
000458 50 GRAM PACK 100
000459 55 GRAM PACK 100
000460 60 GRAM PACK 100
LEAD ALLOY RIM WEIGHTS
Suit passenger alloy rims with
deep flange
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 56/96
www.repcotrp.com.auPage
56
WHEEL WEIGHTS
Cat. No. DESCRIPTION PACK QTY.
000488 05 GRAM PACK 100
000489A MIXED PACK 140000490 10 GRAM PACK 100
000491 15 GRAM PACK 100
000492 20 GRAM PACK 100
000493 25 GRAM PACK 100
000494 30 GRAM PACK 100
000495 35 GRAM PACK 100
000496 40 GRAM PACK 100
000497 45 GRAM PACK 100
000498 50 GRAM PACK 100
000499 55 GRAM PACK 100
000500 60 GRAM PACK 100
LEAD FN ALLOY RIM WEIGHTS
Suit passenger alloy rims with
extra deep flange where alloy range
is not suitable
Cat. No. DESCRIPTION PACK QTY.
000487 MIXED 10 OF EACH SIZE PACK 50
000505 30 GRAM PACK 50
000509 50 GRAM PACK 50
000512 70 GRAM PACK 50
000513 100 GRAM PACK 50
000514 120 GRAM PACK 50
TOYOTA STEEL RIM WEIGHTS
Suit toyota steel rims, light commercial vehicles, 4WD rims and rims with a deeper
rolled flange.
Cat. No. DESCRIPTION PACK QTY.
MC10 10 GRAM PACK 25
MC15 15 GRAM PACK 25
MC20 20 GRAM PACK 25
MC25 25 GRAM PACK 25
LEAD MOTORCYCLE WEIGHTS
Suit motorcycle spoke rims. Made in Italy
Cat. No. DESCRIPTION PACK QTY.
MCC10 10 GRAM PACK 25
MCC15 15 GRAM PACK 25
MCC20 20 GRAM PACK 25
MCC25 25 GRAM PACK 25
LEAD MOTORCYCLE WEIGHTS
Suit motorcycle alloy rims. Made in Italy
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 57/96
Page
57www.repcotrp.com.au
Suit light truck rims, landrover rims, Landcruiser rims, Ford F150 &
F250, Pick ups and vans
Suit Heavy Truck Rims for medium and heavy duty trucks and buses
with tube type wheels.
Suit tubeless truck rims
LEAD HEAVY TRUCK WEIGHTS
LEAD TUBELESS TRUCK WEIGHTS
LEAD LIGHT TRUCK WEIGHTS
Cat. No. DESCRIPTION PACK QTY.
028G LT 30 GRAM PACK 25
055G LT 55 GRAM PACK 25
085G LT 85 GRAM PACK 25
113G LT 110 GRAM PACK 25
142G LT 140 GRAM PACK 25
170G LT 170 GRAM PACK 25
Cat. No. DESCRIPTION PACK QTY.
055G HT 56 GRAM PACK 10
113G HT 113 GRAM PACK 10
170G HT 170 GRAM PACK 10
227G HT 227 GRAM PACK 10
283G HT 283 GRAM PACK 10
340G HT 340 GRAM PACK 10
Cat. No. DESCRIPTION PACK QTY.
TRUCK-50G 50 GRAM PACK 10
TRUCK-75G 75 GRAM PACK 10
TRUCK-100G 100 GRAM PACK 10
TRUCK-150G 150 GRAM PACK 10
TRUCK-200G 200 GRAM PACK 10
TRUCK-250G 250 GRAM PACK 10
TRUCK-300G 300 GRAM PACK 10
Cat. No. DESCRIPTION PACK QTY.
S/O 10G 10 GRAM PACK 15
S/O 15G 15 GRAM PACK 11
LB100 100 GRAM BLOCK PACK 20
LB125 125 GRAM BLOCK PACK 20
LB150 150 GRAM BLOCK PACK 20
LEAD STICK ON WEIGHTS
WHEEL WEIGHTS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 58/96
www.repcotrp.com.auPage
58
Imported Wheel Weights
WHEEL WEIGHTS
Suit passenger car steel rims
Suit passenger alloy rims
LEAD STEEL RIM WEIGHTSCat. No. DESCRIPTION PACK QTY.
111-005G 05 GRAM BOX 100
111-010G 10 GRAM BOX 100
111-015G 15 GRAM BOX 100
111-020G 20 GRAM BOX 100
111-025G 25 GRAM BOX 100
111-030G 30 GRAM BOX 100
111-035G 35 GRAM BOX 100
111-040G 40 GRAM BOX 100
111-045G 45 GRAM BOX 100
111-050G 50 GRAM BOX 50
111-055G 55 GRAM BOX 50
111-060G 60 GRAM BOX 50
LEAD ALLOY RIM WEIGHTS
Cat. No. DESCRIPTION PACK QTY.
610-005G 05 GRAM BOX 100
610-010G 10 GRAM BOX 100
610-015G 15 GRAM BOX 100
610-020G 20 GRAM BOX 100
610-025G 25 GRAM BOX 100
610-030G 30 GRAM BOX 100
610-035G 35 GRAM BOX 100
610-040G 40 GRAM BOX 100
610-045G 45 GRAM BOX 100
610-050G 50 GRAM BOX 50
610-055G 55 GRAM BOX 50
610-060G 60 GRAM BOX 50
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 59/96
Page
59www.repcotrp.com.au
LEAD STICK ON WEIGHTS
Cat. No. DESCRIPTION PACK QTY.
BS100 STICK ON WEIGHT 60 GRAMSTRIP 5/10
BOX 100
Cat. No. DESCRIPTION PACK QTY.
SS100 STICK ON WEIGHT 60 GRAM STRIP 5/10 BOX 100
BL5-10 BLACK STICK ON WEIGHT 60 GRAMSTRIP 5/10
BOX 100
WH5-10 WHITE STICK ON WEIGHT 60 GRAM
STRIP 5/10
BOX 100
BS25 STICK ON 25G WHEEL WEIGHT BOX 10
BS50N STICK ON 50G WHEEL WEIGHT BOX 25
Cat. No. DESCRIPTION
0252137 WHEEL WEIGHT PLIERS
Cat. No. DESCRIPTION
CNP CHROME NUT PULLER
Cat. No. DESCRIPTION
UWT1000 WHEEL WEIGHT HAMMER
UWT2000 WHEEL WEIGHT HAMMER DOUBLE HOOK
UWT3000 WHEEL WEIGHT HAMMER / CORE REMOVER
STEEL STICK ON WEIGHTS
WHEEL WEIGHT PLIERS
WHEEL WEIGHT HAMMER
CHROME NUT PULLER
WHEEL WEIGHTS
BS100
0252137
UWT1000
CNP
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 60/96
www.repcotrp.com.auPage
60
TRUCK WHEEL SERVICE
Wheel Nut Indicators
Wheel nut indicators is a loose wheel nut indicator that
is used by the transport industry as an enhancement and
development of fleet safety roadworthiness procedures,daily walk-round inspection and defect reporting and
scheduled maintenance requirements. Its use allows
accurate monitoring for loose wheel nuts and helps prevent
wheel hub damage or the loss of a road wheel should a
wheel nut loosen. An additional safety feature of the wheel
nut indicator is its heat sensitivity, when higher than normal
operational temperature are reached the Checkpoint is
designed to melt indicating an imminent bearing failure or
braking issues
Application
The wheel nut indicator is fixed to the wheel nut by gripping the six corners of the hexagon of the wheel nut. When the wheel is being
fitted out the pointers should be aligned and set in a recognizable pattern. Should a wheel nut loosen off, the pointer has no option
but to move with the nut and so break the recognizable pattern that was set, thus indicating the wheel nut has begun to rotate and
therefore to loosen.
Sizes
Wheel nut indicators are available in a range of sizes.
The size refers to the ‘across the flats’ dimension of the wheel nut hexagon in millimeters.
A simple and accurate means of measuring the wheel nut size is to use an un-worn socket as it is important that the correct size of
wheel nut indicator is fitted to the wheel nut.
They should be a tight slide fit down to the washer of the wheel nut or wheel hub face leaving a small nominal (say 0.5 mm) air gapbetween the two surfaces.
Fitting
It is recommended that the initial fitting out of the vehicle is done in the course of scheduled maintenance or during a roadworthiness
inspection or when a wheel nut torque check is scheduled.
The wheel nuts must be torqued to the recommended value before the wheel nut indicators are fitted.
The wheel nut indicator should be a tight slide fit onto the wheel nut without the need for tools or any other assistance. This is also
the case when there is a need to remove them.
17mm 18mm 19mm 20mm 21mm
22mm 23mm 24mm 25mm 26mm
27mm 28mm 29mm 30mm 31mm
32mm 33mm 34mm 35mm 36mm
38mm 40mm 41mm 44mm 46mm
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 61/96
Page
61www.repcotrp.com.au
TRUCK WHEEL SERVICE
Spreaders & Safety Cages / Dip Tanks
TYRE SPREADERS
SAFETY CAGES
DIP TANKS
Cat.No.
DESCRIPTION BOXQTY
GTPMS Passenger / Light Truck Tyre
Spreader With Light
1
BB31 Pneumatic Passenger / Light Truck
Tyre Spreader , ok for Truck tyres
as well
1
BB32 TRUCK PNEUMATIC LIFTER TYRESPREADER (Not shown)
1
Cat. No. DESCRIPTION BOXQTY
BB34 Single Bay Safety Cage 1.2 x 1.2 x .55 1
BB36 Double Bay Safety Cage 1.2 x 1.2 x .55 PER BAY 1
BB37 Earthmover Single Bay Safety Cage 1.8 x 1.8 x .80 1
BB38 Four Wheel Drive Safety Cage 0.9 x 0.9 x 0.4 1
Cat. No. DESCRIPTION
BB39 Square metal dip tank / truck
BB40 Square metal dip tank / FWD
BB41 Truck lifter dip tank
BB42 FWD metal lifter dip tank
BB43 FWD plastic lifter dip tank
BB44 Round plastic dip tank / FWD
BB31
BB34 BB36
BB39
BB43
GTPMS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 62/96
www.repcotrp.com.auPage
62
TRUCK WHEEL SERVICE
5095A
CODE DESCRIPTION
5095A Easy Lever wheel dolly. With a width of 22”, this dolly
handles tire diameters of 24” to 36”. Wt., 20 lbs; 9.09kg
Gives technicians the leverage they need to easily remove or
install truck tyre-and-wheel assemblies.
•Heavy-duty construction capable of toting 300 pounds.
•Onboard rollers that make stud-hole alignment a snap.•Spring-loaded kickstand for handy parking.
•Rugged tubular steel construction.
CODE DESCRIPTION
RASTD6 6 Ton
• Vehicle Support Stand 6,000Kg
• Working Load Limit: 6,000 Kgs
• Height Lowered: 397 mm
• Height Raised: 630 mm
• Weight: 15.5 Kg (pair)RASTD10 10 Ton
• Vehicle Support Stand 10,000Kg
• Working Load Limit: 10,000 Kgs
• Height Lowered: 447 mm
• Height Raised: 706 mm
• Weight: 28 Kg (pair)
EASY LEVER WHEEL DOLLIES
DUAL WHEEL TROLLEY
MPDWD1
Dual wheel dolly
Product size 1016 x 1130 x
845mm
Maximum lift height 500mm
Safety chain 2500mm length,
6mm diameter
Weight 75kg
Material – heavy duty steel
with sturdy continuous welds
AXLE STANDS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 63/96
Page
63www.repcotrp.com.au
200 AUTOMATIC COUPLINGS
300 AUTOMATIC COUPLINGS
400 AUTOMATIC COUPLINGS
AIR SERVICE PRODUCTS
RYCO Air Fittings
400 COUPLING NIPPLESBSPP FEMALE
THREAD /BARB PART NO
1/4 R420SF
3/8 R430SF
1/2 R440SF
THREAD /BARB PART NO
1/4 R420SM
3/8 R430SM
1/2 R440SM
HOSE BARB HOSE BARB
THREAD /BARB PART NO
1/4 R420SH
5/16 R425SH
3/8 R430SH
1/2 R440SH
1/4 R420PM
3/8 R430PM
1/2 R440PM
BSPP FEMALE
THREAD /BARB PART NO
1/4 R420PF
3/8 R430PF
R430PH
1/2 R440PF
SCHRADER LONG R417A
BSPT MALE
THREAD /BARB PART NO
1/2 R440PH
1/4 R420PH
BSPT MALE
THREAD /BARB PART NO
5/16 R425PH
3/8
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 64/96
www.repcotrp.com.auPage
64
Series 320 Cejn Air Fittings
Part No. DESCRIPTION Connection
320 1003 Coupling Hose Barb 8 mm (5/16’’)
320 1004 Coupling Hose Barb 10 mm (3/8’’)
320 1005 Coupling Hose Barb 13 mm (1/2’’)
Part No. DESCRIPTION Connection
320 1152 Coupling Male Thread 1/4’’
320 1154 Coupling Male Thread 3/8’’
320 1155 Coupling Male Thread 1/2’’
Part No. DESCRIPTION Connection
320 1202 Coupling Female Thread 1/4’’
320 1154 Coupling Female Thread 3/8’’
320 1155 Coupling Female Thread 1/2’’
Part No. DESCRIPTION Connection
320 5002 Hose Barb connection 6 mm (1/4’’)
320 5004 Hose Barb connection 10 mm (3/8’’)
320 5005 Hose Barb connection 13 mm (1/2’’)
Part No. DESCRIPTION Connection
320 5152 Male Thread connection 6 mm (1/4’’)
320 5154 Male Thread connection 10 mm (3/8’’)320 5155 Male Thread connection 13 mm (1/2’’)
Part No. DESCRIPTION Connection
320 5202 Female Thread connection 6 mm (1/4’’)
HOSE CONNECTION
HOSE CONNECTION
Male thread
Male thread
Female thread
Female thread
AIR SERVICE PRODUCTS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 66/96
www.repcotrp.com.auPage
66
AIR SERVICE PRODUCTS
PART NO DESCRIPTION UOM
H538 HOSE CLAMP 9-12mm BOX 10
H539 HOSE CLAMP 11-16mm BOX 10
53-1802 9 mm (min) 11 mm (max) EACH
53-1803 11 mm (min) 13 mm (max) EACH
53-1804 13 mm (min) 15 mm (max) EACH
53-1805 15 mm (min) 18 mm (max) EACH
CAT NO. FEATURES
58-1056 • High impact tough and durable polypropylene construction
• Fully enclosed weather resistant and UV stalilised outer case
protects the hose and inner drum assembly against dirt and other
contaminants
• Auto lock and rewind mechanism provides positive hose latching
every full revolution of the hose drum
• 15 m x 12.5mm Hose with 2 metre length leader hose with quality
brass fittings included as standard
• Heavy duty mounting bracket with fixed in-line or optional 180
degree swivel mount is suitable for wall or overhead mounting
• Convenient carry handle located on the top panel for removing andrefitting the hose reel from the mounting bracket
PART NO DESCRIPTION UOM
30 06020 6mm I.D. AIR HOSE 20 METER ROLL
30 08020 8mm I.D. AIR HOSE 20 METER ROLL
30 10020 10mm I.D. AIR HOSE 20 METER ROLL
DSF/12.5 12.5mm I.D. AIR HOSE 20 METER ROLL
H538 Series 53-1802
Series
58–1056
30 06020
CAT NO. FEATURES
58-1034 •High impact tough and durable polypropylene construction
•Fully enclosed weather resistant and UV stalilised outer case
protects the hose and inner drum assembly against dirt and other
contaminants
•Auto lock and rewind mechanism provides positive hose latching
every full revolution of the hose drum
•20m x 10mm hose with 2 metre length leader hose with quality brass
fittings included as standard
•Heavy duty mounting bracket with xed in-line or optional 180 degree
swivel mount is suitable for wall or overhead mounting
•Convenient carry handle located on the top panel for removing andrefitting the hose reel from the mounting bracket
58–1034
Air Hose, Clamps & Hose Reel
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 67/96
Page
67www.repcotrp.com.au
Air Tools
AIR SERVICE PRODUCTS
Feature and Benefits
✓ Swivel Exhaust.
✓ Built-In Regulator.
✓ Light weight body provides superpower to weight ratio.
✓ Ideal for use in confined spaces.
✓ Lever trigger with safety catch.
✓ Reversible head.
✓ Suggested applications:For driving and removingnuts and bolts.
Specifications
Free Speed: 280 rpm.Average Air Consumption:170 l/min (6 cfm).
Maximum Air Consumption:680 l/min (24 cfm).
Maximum Torque @ 90 psi:45 Nm (35 ft-lb).
Inlet: 1/4” NPT.
Weight: 680 grams.
Length: 210 mm.
Mini Air Ratchet Wrench - 3/8”
Drive (RCRW951)
Air Ratchet Wrench -
3/8” Drive (RARW2150 - A)
Feature and Benefits
✓ 360° Swivel Exhaust.
✓ Built-In Regulator.
✓ Light weight body provides super
power to weight ratio.
✓ Lever trigger with safety catch.
✓ Reversible head.
✓ Suggested applications: For driving
and removing nuts and bolts.
Specifications
Free Speed: 180 rpm.Average Air Consumption:150 l/min (5.4 cfm).Maximum Air Consumption:610 l/min (21.6 cfm).Maximum Torque @ 90 psi:100 Nm (75 ft-lb).
Inlet: 1/4” NPT.
Weight: 1.22 kg.
Length: 265 mm.
Kit ContentsAngle Die Grinder (RADG1143)pictured left.2 x Hand Wrenches.1/8” and 1/4” Collet Chucks.10 x Mounted Grinder Stones
(5 x 1/8”, 5 x 1/4”).2 x Sanding Pads (50, 75mm).2 x Sanding Disc Paper (50, 75mm).2 x Stripping Disc (50, 75mm).2 x Finishing Disc (50, 75mm).2 x Round Bar 1/4”.Inlet: 1/4” NPT.Oil Pot.Blow Moulded Case.
SpecificationsAverage Air Consumption:120 l/min (4.3 cfm).
Maximum Air Consumption:480 l/min (17 cfm).
Maximum Speed @ 90psi: 20,000 rpm.Adjustable Regulator.
360° Swivel Exhaust.Inlet: 1/4” NPT.
30pc Angle Die Grinder Kit
(RADGK067)
Feature and Benefits
✓ 360° Swivel Exhaust.
✓ Built-In Regulator.
✓ Light weight body provides super
power to weight ratio.
✓ Lever trigger with safety catch.
✓ Reversible head.
✓ Suggested applications: For driving
and removing nuts and bolts.
Specifications
Free Speed: 180 rpm.Average Air Consumption:150 l/min (5.4 cfm).Maximum Air Consumption:610 l/min (21.6 cfm).Maximum Torque @ 90 psi:100 Nm (75 ft-lb).
Inlet: 1/4” NPT.
Weight: 1.23 kg.
Length: 265 mm.
Air Ratchet Wrench -
1/2” Drive (RARW2150 - B)
Feature and Benefits
✓ Convenient for impact wrenchesand die grinders.
✓ Use to lubricate air toolmechanisms.
✓ Polished chrome metal nozzle.
✓ Visual indication for contents.
✓ One handed operation.
SpecificationsCapacity: 16cc. Length: 185mm.
Mini Grease Gun
(RG105)
Feature and Benefits
✓ Ergonomic handle grip reduces
fatigue, vibration and cold.
✓ Lightweight body made from
composite materials.
✓ 360° Swivel Exhaust.
✓ Compact size for use in
confined areas with greater
manoeuvrability.
✓ Super power to weight ratio.
✓ Lever trigger with safety catch.
✓ Suggested applications: For
grinding, sanding, porting and
deburring of metal and other
materials.
SpecificationsAverage Air Consumption:120 l/min (4.3 cfm).
Maximum Air Consumption:480 l/min (17 cfm).
Maximum Speed @ 90psi: 20,000 rpm.
Adjustable Regulator.
90° Drive.
Collet Size: 1/4”.
Inlet: 1/4” NPT.Weight: 540 grams.
Length: 175 mm.
Air Angle Die Grinder -
1/4” Drive (RADG1143)
Feature and Benefits
✓ Breakaway torque 680Nm
Air Impact Wrench
3/8” Dr (RIW124)
Air Hammer -1/4” Drive (RAH720)
Feature and Benefits
✓ Moulded grip reduces fatigue,vibration and cold.
✓ Heat treated parts for longer life.
✓ Chrome Molybdenum Chisels.
✓ Light weight body makes it ideal
for use in confined spaces.✓ Super power to weight ratio.
✓ One piece spring.
✓ Trigger operated.
✓ Suggested applications: Forcutting, porting and deburring ofmetal and other materials.
SpecificationsBlows per minute @ 70 psi: 4500.
Chisel Mounting Length: 41mm (1-5/8”).
Average Air Consumption:185 l/min (6.5 cfm).Maximum Air Consumption:735 l/min (26 cfm).
Maximum Operation Pressure: 70 psi.
Chisel Shank Diameter: 10.2 mm.
Inlet: 1/4” NPT.
Weight: 1.04kg.
Feature and Benefits
✓ Ergonomic handle grip reducesfatigue, vibration and cold.
✓ Aluminium casing.
✓ Easy bit changing with QuickChange Keyed Chuck 3/8” (10mm).
✓ Variable speed trigger with onehand forward/reverse lever.
✓ Smooth operation with powerful,efficient motor.
✓ Reduced noise with handleexhaust.
✓ Suggested applications:Drilling holes in steel, wood,plastic and other surfaces.
SpecificationsAverage Air Consumption:115 1/min (4.1 cfm).
Maximum Air Consumption:465 1/min (16.4 cfm).
Maximum Speed @ 90psi: 2,200 rpm.
Inlet: 1/4” NPT.
Weight: 1.3 kg.Length: 220 mm.
Chuck Capacity: 3/8” (10mm).
Reversible Air Drill -
3/8” Drive (RAD330)
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 68/96
www.repcotrp.com.auPage
68
Air Tools
HIGH SPEED BUFFER
AL-1320
BLOW VACUUM KIT
PT900-KIT
LOW SPEED
TYRE BUFFER
AL-1213
31’’ SHORT SHAFT
IMPACT WRENCH
1500ft/lbs
KI-36
1’’ EXTENDED
IMPACT WRENCH
1500ft/lbs
KI-36-6
AIR SERVICE PRODUCTS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 69/96
Page
69www.repcotrp.com.au
AIR SERVICE PRODUCTS
Air Tools
AIR IMPACT WRENCH1/2” DR (50MM) ANVIL
• Breakaway torque 1,625Nm
• Single handed operation
• 3 speed control
RIW260-2
AIR IMPACT WRENCH - 1/2” DRIVE
Free Speed: 7000 rpm.
Average Air Consumption:225 l/min (8 cfm).
Maximum Air Consumption:900 l/min (32 cfm).
Working Torque: 810 Nm (600 ft-lb).
Maximum Torque @ 90psi:1290 Nm (950 ft-lb).
Inlet: 1/4” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 2.06 kg. Length: 198 mm.
AIR IMPACT WRENCH WITH
EXTENDED 2” (50MM) ANVIL
- 1/2” DRIVE
Free Speed: 7000 rpm.
Average Air Consumption:225 l/min (8 cfm).
Maximum Air Consumption:900 l/min (32 cfm).
Working Torque: 680 Nm (500 ft-lb).
Maximum Torque @ 90psi:1150 Nm (850 ft-lb).
Inlet: 1/4” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 2.16 kg. Length: 248 mm.
AIR IMPACT WRENCH
-3/4” DRIVE
Free Speed: 4500 rpm.
Average Air Consumption:320 l/min (11.3 cfm).
Maximum Air Consumption:1275 l/min (45 cfm).
Working Torque: 1350 Nm (1000 ft-lb).
Maximum Torque @ 90psi:1490 Nm (1100 ft-lb).
Inlet: 3/8” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 3.84 kg. Length: 240 mm.
AIR IMPACT WRENCH
-1/2” DRIVE
Free Speed: 6500 rpm.
Average Air Consumption:200 l/min (7 cfm).
Maximum Air Consumption:790 l/min (28 cfm).
Working Torque: 610 Nm (450 ft-lb).
Max Torque @ 90psi: 680 Nm (500 ft-lb).
Inlet: 1/4” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 2.68 kg. Length: 185 mm.
AIR IMPACT WRENCH 1/2” DR
• Breakaway torque 1,625Nm
• Single handed operation
• 3 speed control
RIW260
AIR IMPACT WRENCH 3/4” DR
• Breakaway torque
2,440Nm
RIW3125
(RCIW2360 - 2) (RCIW661) (RIW460)(RCIW2360)
3/4’’ EXTENDED
IMPACT WRENCH
750ft/lbs
KI-23-6
3/4’’ H/D EXTENDED
IMPACT WRENCH
1100ft/lbs
KI-30-6
3/4’’ SHORT SHAFT
IMPACT WRENCH
1100ft/lbs
KI-30
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 70/96
www.repcotrp.com.auPage
70
AIR SERVICE PRODUCTS
Air Tools & Grinders Cordless Tools
CP7780-6 – Lightweight & Powerful
FEATURES:• 1” straight impact wrench with 6” extended anvil• 17 lbs – 7.7 kg thanks to an aluminum housing giving less
fatigue to the operator• 1700 ft.lbs – 2320 Nm maximum torque in reverse• Integrated protective cover on the clutch housing• Twin hammer mechanism in oil bath• Dedicated lever for forward & reverse
UG-65ER
TECHNICAL DATA
Throttle Handle Sleeve Self Closing Lever
Capacity (Wheel Size) 63.5mm (2.1/2")
Max Free Speed 14,600 RPM
Overall length 271mm
Weight 1.25kg
Air Inlet N.P.T 1/4
Air Hose size 10mm
Noise Level dbA 88
CP7782-6 – High torque & durability
FEATURES:• 1” straight impact wrench with 6” extended anvil• 2140 ft.lbs – 2900 Nm maximum torque in reverse• Pinless closed reinforced rocking dog impact mechanism• Socket retainer ring combined with hole retainer• Ergonomic side handle
• Full teasing trigger• Regulator with integrated forward/reverse with 3-positionpower settings in both directions
Cordless Impact WrenchVariable Switch
FEATURES:
• Premium quality
• Variable speed
• 18 volt
• 539Nm torque
• Compact, lightweight and powerfuldiecast aluminium gear-housing
• Ergonomic soft grip handle
• Powerful fan cooled motor
• Includes 2 x 3.0Ah LithiumIon batteries
• Weight 2.9kg with battery
RCLIWV
CordlessImpact WrenchAdjustable Torque
• Premium quality
• 6 adjustable torquesettings
• 18 volt
• 539Nm torque
• Compact, lightweightand powerfuldiecast aluminiumgear-housing
• Ergonomic soft grip handle
• Powerful fan cooled motor
• Includes 2 x 3.0AhLithium Ion batteries
• Weight 2.9kg with batteryRCLIWA
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 71/96
Page
71www.repcotrp.com.au
CP7763
FEATURES
• 3/4” Super duty impact wrench
• Twin hammer clutch
• High Power: 1200 ft-lbs (1,627Nm)
• Compact size at only 11.6 lbs (5.3kg)
• Combined power regulator withforward/
Max Torque 1200ft/lb - 1627Nm
Same features as CP7763 with 6”(152mm) extended anvil
CP772 & CP772-6
FEATURES• 3/4” Super duty impact wrench
• Pin clutch oil bath
• One handed push buttonforward / reverse with 4 positivepower settings
• CP772-6 6 inch extended anvil
Max Torque 1000ft/lb - 1356Nm
FEATURES
• 1/2” Heavy duty impact wrench• CP’s patented SpringHammer clutch
• Low air consumption and high torque
• Ergonomic trigger and handle
Max Torque 550ft/lb - 746Nm
CP7733
CP7733-2Same features as CP7733
with 2" (51mm) extendedanvil
FEATURES
• 1/2” Super dutyimpact wrench
• CP’s patentedSpringHammer oil bath clutch
• CP749-2 2 inch extended anvil
• One handed push button forward / reverse with 4 positive power settings
• Full power in reverse
• Compact design with comfortable
contoured handleMax Torque 625ft/lb - 827Nm
FEATURES
• High speed tyre buffer
• Adjustable speed control
• Jacob’s quality 3/8” (10mm)chuck for holding bufng accessories
• Lock off throttle to prevent accidentalstart up
• Rear exhaust
22,000 RPM
CP-871
FEATURES
• High speed tyre buffer
• Adjustable speed control
• Quick change slip chuck
• Lock off throttle to prevent accidentalstart up
• Rear exhaust
2,800 RPM
CP-873
AIR SERVICE PRODUCTS
Air Tools CP
CP749-2
CP749
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 72/96
www.repcotrp.com.auPage
72
WORKSHOP TOOLS
Tyre Tool Products
IMT 1800
Designed to break tyre beads on 24-63 inch
OTR Earthmoving rims
IMT 1000
The 1000 Bead Breaker
break tyres up to 29.5 x 29
IMT 150
Bead push off tool
IMT 200
10,000 PSI air/hydraulic 1.25 gallon pump for
IMT210, IMT1800 and IMT 300.
IMT 55 Ton
Aluminum Jack
6” stroke
IMT 300
Ideal for ag and industrial dual tyre/rims
IMT 210
Designed to break tyre
beads on truck/tractorand grader tyres
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 73/96
Page
73www.repcotrp.com.au
WORKSHOP TOOLS
Tyre Tool Products
Manual Bead BreakerBB70160
Loosens tyre bead from the rim with leverage.
• Excellent for working on the tyre without removing the wheel.
• Will handle 38” and 42” 14-ply farm tractor and backhoe tyres.
with drop center rims to small ATV and lawn mower
• Operates with air ratchet wrench or ratchet & socket.
• do not use AIR IMPACT TOOl
• Weight: 12 lbs. (5 kg)
BB10107
• Lightweight Aluminum Bead Breaker.
• Works on all single piece, 2 piece & 3 piece tyres & rims.
• All aluminum construction.
• Works with any 10,000 PSI pump.
• Weight: 32 lbs. (15 kg)
BB10312 55 Ton Aluminum jack
• Lightweight yet durable.
• For use with 10,000 psi pumps.
• Ships completely assembled with valve, coupler, and 7” x 7” base.
• Perfect for off highway tyre work.
• Heavy duty Cylinder Wall 11/16” Thick.
Min. Height Max. Height Stroke Weight
10 1/2” 16 1/2” 6” 33 lbs. (15 kg)
BB10501• 3.5 quart oil capacity.
• Rugged poly glass reservoir with sight gauge.
• 10,000 psi hydraulic pressure.
• Easily works on rams and bead breakers with oil to spare.
• Compact design easily ts storage bins.
• Shipped with premium hydraulic oil.
• Weight: 18 lbs. (8 kg)
BB10505
• Rugged 2 Gallon Metal reservoir.
• 10,000 psi hydraulic pressure.• Sight Gauge.
• Shipped with Premium Hydraulic Oil.
• Maximum oil capacity for any application.
• Weight: 18 lbs. (19 kg)
BB254
• Lightweight Aluminum Bead Breaker.
• Detachs inside & outside truck & Tractor beads for rims.
• Also for 3-pieces Caterpillar rims from 25" to 57"
• Works with any 10,000 PSI pump.
• Weight: 32 lbs. (18.5 kg)
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 74/96
www.repcotrp.com.auPage
74
Sockets and Extensions
WORKSHOP TOOLS
Code Description
0531117 17 mm
0531119 19 mm
0531121 21 mm
0531122 22 mm
0531123 23 mm
BB4PCSS 4 Piece Set, 17,19,21,22mm
BB8PCST 8pc Mag Wheel Socket & Torque Bar Set,
110,120,135,150Nm 80,90,100,110FT-LBS
4pc Thin Wall Deep Impact Socket Set,17,19,21,22
1/2” DRIVE THIN WALL DEEP IMPACT SOCKETSMETRIC WITH PLASTIC SLEEVE
1/2” DRIVE DEEP IMPACT SOCKETS METRIC
TORSION BARS
113300 1/2 DR TORSION BAR SET
113303 1/2IN TORSION BAR 80FT/LB GREEN
113304 1/2DR TORSION BAR 100FT LBS BLUE
113305 1/2DR TORSION BAR 140FT LBS WHITE
113306 1/2DR TORSION BAR 140FT LBS BLACK
BB8PCST
Code Description
0531017 17 mm
0531019 19 mm
0531021 21 mm
0531022 22 mm
0531023 23 mm
0531909 1/2F-3/4M IMPACT ADAPTOR
BB12SSM “12 Piece 1/2 drive deep socket set. 10, 12, 13,
14, 15, 16, 17, 18, 19, 21, 22, 24mm
BB22SSM “22 Piece 1/2 drive deep socket set, 10, 11, 12,13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,24, 25, 26,
27, 28, 29, 30, 32mm
TORSION BARS
BB4PCSS
113300
BB12SSM
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 75/96
Page
75www.repcotrp.com.au
WORKSHOP TOOLS
3/4” DRIVE DEEP IMPACT SOCKETS AF
3/4” DRIVE DEEP IMPACT SOCKETS METRIC
3/4” DRIVE SQUARE SOCKETS IMPACT 5 PIECE SOCKET SET
FLIP SOCKETS IMPACT
Code Description
0541856 15/16”
0541858 1”
0541860 1 -1/16”
0541862 1-1/8”
0541864 1-3/16”
0541866 1-1/4”
0541868 1-5/16”
0541838 1-3/8”
0541872 1-7/16”
0541874 1-1/2”
XS608 8 PC ¾ DR 1.1/16, 1.1/8, 1.1/4, 1.5/16, 1.3/8 1.7/16, 1.1/2.
0541019 19 mm
0541026 26 mm
0541027 27 mm
0541028 28 mm
0541029 29 mm
0541032 32 mm
0541033 33 mm
0541035 35 mm
0541036 36 mm
0541038 38 mm
0541041 41 mm
0541907 3/4 DR. X 6 IMPACT EXTENSION
0541908 8” x 3/4” IMPACT EXTENSION
0541920 3/4 FEM - 1/2”M ADAPTOR
0541912 12” x 3/4” IMPACT EXTENSION
0551917 1 FEM - 3/4M ADAPTOR
27, 30, 32, 33, 34, 36, 38, 41mm
Includes 17, 19, 21 sq & 27, 30, 32, 33, 35, 36, 38, 41mm.
Code Description
PFC17SQ 17 mm
PFC19SQ 19 mm
PFC21SQ 21 mm
Code Description
BB5PCSSFL Kit Includes: 17, 19, 21, 22mm Sockets + 19-
21mm Flip Socket
PFC19.21 19 + 21mm 1/2” DRIVE FLIP
SOCKETS
PFC35.17 35 mm + 17 SQ 3/4” DRIVE
PFC38.20 38 mm + 20 SQ 3/4” DRIVE
PFC41.21 41 mm + 21 SQ 3/4” DRIVE
BBCP34-11
BB5PCSSFL
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 76/96
www.repcotrp.com.auPage
76
WORKSHOP TOOLS
Code Description
0441808 1-1/4 X 3/4DR. SOCKET STD
0441809 1-5/16 X 3/4DR SOCKET STD
0441908 8” X 3/4D EXTENSION BAR
0441916 16” X 3/4D EXTENSION BAR
0441922 3/4 DRIVE SLIDING T HANDLE
CHROME VANADIUM SOCKETS & EXTENSIONS
Code Description
0211308 COMBINATION PLIERS 8in
0211308 LONG NOSE PLIERS 8”
0221107 SIDE CUTTERS
CHROME VANADIUM SOCKETS &EXTENSIONS
Code Description
MICHELIN-F Michelin Force Lever (genuine)
MICHELIN-H Michelin Halte Lever (genuine)
MT-FORCE Austral ian Made Michel in. Style Force Lever
MT-HAULTE Australian Made Michelin. Style Halte Lever
MTL1 Mumme Halte Tyre Lever
MTL2 Mumme Force Tyre Lever
TG11E KENTOOL fibreglass handled hammer or “kiwi pick”
TG11EH Replacement fibreglass handle
TI450A TRUCK TUBELESS TYRE LEVER 37in
0772380 8” Motor Cycle Tyre Lever
0772381 12” Tyre Lever
0772382 16” Tyre Lever
0772383 20” Tyre Lever5TL600 24” Tyre Lever
BB70150 SLIDE HAMMER• Breaks the most stubborn beads with ease.• Reduces user fatigue with its spring action design.• This design prevents slide hammer kick back.• The wedge foot is forced between the bead and rim ange,
delivering blow directly to the tip.• Heavy duty tool that will not break
J82L SLIDE HAMMER AUSTRALIAN MADE
HT028 8LB SLEDGE HAMMER
TYRE LEVERS /SLIDE HAMMER
Code Description
0252137 Wheel Weight PliersUWT 1000 Ultimate Wheel Weight Pliers
UWT 2000 SIDEKICK ( DOUBLE HOOK )
UWT 1000 For removal of valve cores and wheel weights
CNP Chrome Nut Pullers
3801-R TYRE PROBE
Code Description
BBSS12 Screwdriver Set Go-Thru
12pc
Code Description
JMRM McG.RUBBER MALLET
STEEL SHAFT
JMRH McG.REPLACEMENT
HEAD FOR JMRM
TG11E
0252137
BBSS12
JMRM
JMRH
MICHELIN-F
MICHELIN-H
BB70150
J82L
UWT1000
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 77/96
Page
77www.repcotrp.com.au
WORKSHOP TOOLS
Norbar Torque Wrenches
CODE DESCRIPTION
BB13047 Operates between: 100.0 - 500.0 lbf·ft
150.0 - 700.0 N·m
Technical Specification
Length: 1150 mm
Square Size: 3/4”
Torque Radius: 924.4 mm
Weight: 6.3 Kg
Ratchet Teeth: 36
Ratchet Type: push-through
CODE DESCRIPTION
4 AR Operates between: 150.0 - 600.0 lbf·ft
200.0 - 800.0 N·m
Technical SpecificationLength: 1250 mm
Square Size: 3/4"
Torque Radius: 1024 mm
Weight: 6.4 Kg
Ratchet Teeth: 36
Ratchet Type: push-through
CODE DESCRIPTION
5R Operates between: 200.0 - 750.0 lbf·ft
300.0 - 1000.0 N·m
Technical SpecificationLength: 1475 mm
Square Size: 3/4"
Torque Radius: 1272.4 mm
Weight: 7.3 Kg
Ratchet Teeth: 36
Ratchet Type: push-through
CODE DESCRIPTION
4R Operates between: 100.0 - 500.0 lbf·ft
150.0 - 700.0 N·m
Technical Specification
Length: 1150 mm
Square Size: 3/4”
Torque Radius: 924.4 mm
Weight: 6.3 Kg
Ratchet Teeth: 36
Ratchet Type: push-through
ALSO AVAILABLE IN 1” DRIVE ALSO AVAILABLE IN 1” DRIVE
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 79/96
Page
79www.repcotrp.com.au
HYDRAULIC JACKS
Garage Jacks
MODEL CODE Working Load Limit Closed Height Lift Extension Screw
Height
Maximum
Height
Weight
STANDARD TL-A3020 20,000Kg 245mm 140mm 90mm 475MM 16.0Kg
STANDARD 4321C 20,000Kg 247mm 146mm 60mm 454mm 20.4Kg
CODE DESCRIPTION
1526 3 1/2 ton quick lift service jack. Wt., 96 lbs; 43.64kg• The ideal oor jack for both a large automotive service center or a one person shop.
• One pump to load; three pumps to full height unloaded.
• Extra wide lift range – from 4” to 21”.
• A long 48” spring-loaded handle provides rapid return after each pump.
• Heavy-duty construction – rolled edges add strength and resist twisting.• With a wheel base of 23”, the front wheels are 3-1/2” diameter and rear casters are 2-1/8”.
• Pinned 4-3/4” saddle will not lift off during use.
CODE DESCRIPTION
1504A 3-ton service jack with lifting range of 6” to 20-1/4”. Wt., 91 lbs., 5 oz; 41.50kg
• The Stinger series 3-ton hydraulic service jacks are designed for the budget-minded shop owner,
who still wants the quality of an OTC product.•Built from select steel, these jacks can stand up to the abuse that jacks are subjected to daily. Yet,
their light, compact design makes them easy and convenient to use.
•Each jack has a built-in safety overload system that prevents use beyond its rated capacity.
•With rear swivel casters, maneuvering and positioning of these jacks is an easy task.
1526
TL-A3020 4321C
BB20TB BB20SQ
1504A
Air Hydraulic BottleJacks
MODEL CODE Working Load Limit Closed Height Lift Extension Screw
Height
Maximum
Height
Weight
STANDARD BB20TB 20,000KG 265mm 185mm 60mm 510mm 17.3Kg
SHORT BB20SQ 20,000Kg 178mm 145mm 60mm 380mm 15.0Kg
TWO-SPEED 3½ TONSERVICE JACK
3 TON SERVICE JACKS
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 80/96
www.repcotrp.com.auPage
80
1510B
BBT18
HBNXLO
HYDRAULIC JACKS
Garage Jacks
Selson Air Jacks
CODE WorkingLoad Limit
MinimumHeight
Lift MaximumHeight
Dimensions Weight
BBT18 1,800KG 85mm 390mm 475mm 800mm x 390mm x 190mm 49Kg
Description
Low lift height, safety bypass system prevents damage. Rubber saddle pad and handle bumper
protect the vehicle from harm. Two-piece, full length removable handle, for convenient trans-portation and compact storage. Automatic overload protection system. Heavy steel frame.
Swivel Rear castors provide easy manoeuvrability of jack. Dual pistons make the jack lift
quickly. Working Range: 85-475mm, Conforms to AS/NZS 2615:2004
CODE WorkingLoad Limit
MinimumHeight
MaximumHeight
Length Width Weight
HBNXLO 2,500KG 130mm 340mm 420mm 255mm 13.0kg
HUSXLO 20,000Kg 130mm 340mm 1500mm 255mm 14.0kg
CODE DESCRIPTIONBB1505B 5-ton service jack. Wt., 232 lbs; 105.45kg
Lifting range: 15cm to 55cm, reach: 120cm.Frame height: 19cm, Floor space: 142cm x 37cm.
BB1510B 10-ton service jack. Wt., 412 lbs; 187.27kgLifting range: 6-1/4” to 22”, Saddle diameter: 6”, Overall reach: 51”.Frame height: 9-3/4”, Floor space: 18” to 60.
• A built-in safety overload prevents using the jack beyond its rated capacity.
• Convenient foot pedal speeds the lifting operation. Handle lock and release control
are located on top of the handle. Handle can be locked into any position fromvertical to horizontal.
• Both models have a spring-loaded 40” handle.
5-TON AND 10-TON SERVICE JACKS
HUSXLO
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 81/96
Page
81www.repcotrp.com.au
HYDRAULIC JACKS
Air Hydraulic Jacks
Minimum Height
210mm
Maximum Height
525mm
BB2010
CODE BB2010
Working Load Limit 10,000/20,000kg
Lifting Range 170 - 320mm
Dimensions 700mm x 340mm x 260mm
Weight 30kg
20,000KG AIR JACK
RJA20T
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 82/96
www.repcotrp.com.auPage
82
HYDRAULIC JACKS
12,000KG AIRBOTTLE JACK
Min height
245mm
Max height
475mm
RJAB12T
20,000KG AIRBOTTLE JACK
Min height
245mm
Max height
475mm
RJAB20T
1500KG LOW PROFILEFLOOR JACK
Weight: 34kg
Height lowered Height raised
75mm 510mm
RJF1.5T
5000KG LONGCHASSIS JACK
Rapid lift foot pedal
Min height Max height
152mm 559mm
RJLC5T
10,000KG LONGCHASSIS JACK
Rapid lift foot pedal
Min height Max height
160mm 559mm
RJLC10T
Min height
145mm
Max height
475mm
RJF2.5T
2500KG GARAGE FLOOR
JACK WITH PEDAL
500KGTRANSMISSION JACK
Min height
895mm
Max height
1820mm
RTTJ1
Professional Lifting Equipmentntroducing the Professional Range of Trade Quality Lifting Products you can use with confidence, supported
y a one year National Warranty. With a range of capacities from 1/2 Tonne to 20 Tonne, you can be sure to find
he right Lifting solution for your workshop. Speak to your Account Manager about Repco’s Jacking and LiftingSolutions. Call 133 227 today and make your destination for Jacking & Lif ting.
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 83/96
Page
83www.repcotrp.com.au
VEHICLE HOISTS
E X C L U S I V E T O R E P C O 2 POST 4.5 TONNE
• Suited to most passenger cars,SUV’s, light trucks & vans
• Meets all Australian& NZ standards
• Hydraulic cylindersin each column:• Direct pull technology• Top Mounted• Full Stroke
• Min ceiling height: 3658mm
• Min Lift height: 93mm
• Max Lift height: 1956mm
I10
4 POST 6.3 TONNE
• Heavy duty hydraulic cylinder,with a single point latch release system
• Jack track is standard feature
• Multiple position latch pointsin each structural leg
• Max Wheelbase: 4572mm
• Lifting Height: 1873mm
• Overall Length: 6248mm
• Overall Width: 3486mm
• Options available:• 2.7 Tonne Rolling Bridge Jacks• Internal Airline Kits• Alignment kit, including slip plates
CR14
2 POST 4.5 TONNE
• With height extension
• Suited to most passenger cars, SUV’s,light trucks & vans
• Meets all Australian & NZ standards
• Hydraulic cylinders in each column:• Direct pull technology• Top Mounted• Full Stroke
• Min ceiling height: 4268mm
• Min Lift height: 93mm
• Max Lift height: 2184mm
DP10A2
Forward Lift’s engineers develop their own designs, and have over
29 years experience manufacturing high quality automotive lifts for
service & repair workshops.
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 84/96
www.repcotrp.com.auPage
84
AIR SERVICE PRODUCTS
Code Description
VH666 TREAD DEPTH GAUGE, 3 sides calibrated 0–1” in 1/32” black
VH667 MASTER SERVICE GAUGE. Precision instrument for testing accuracy
of tyre gauges and meters. Calibrated 10–120 psi in 2 lb. units.
VHJ6110 SWIVEL GAUGE designed for large bore valves. The head adjusts to
fit valves with shields, right angle or straight on. 2-sided nylon bar,
one side calibrated 10–150 psi in 2 lb. units. Other side kPa 80–1040.
VHJ6111 STRAIGHT-ON PENCIL GAUGE fits large and standard bore valves.Designed to clip in shirt pocket. 4-sided nylon bar, 2 sides calibrat-
ed,20–120 psi in 2 lb. units. Other 2 sides kPa 150–800
Code Description
VH660 AIR LIQUID TRACTOR GAUGE for air and liquid filled tyres. 4-sided
nylon bar, 2 sides calibrated 5-50 psi in 1 lb. units.Other 2 sides kPa
35-310.
VH661 STANDARD PASSENGER GAUGE, 4-sided nylon bar, 2 sides,calibrated10–50 psi in 1 lb. units. Other 2 sides kPa 75–340.
VH663 LOW-LOW PRESSURE GAUGE, 4-sided nylon bar, 2 sides, calibrated1–20 psi in /2 lb. units. Other 2 sides kPa 10–135
Code Description
VH664 DUAL FOOT TRUCK GAUGE, 4-sided nylon bar, 2 sides calibrated
20–120 psi in 2 lb. units. Other 2 sides kPa 150–810.
VH668 “STRAIGHT PUSH-ON 30° REVERSE ANGLE SERVICE GAUGE, for
standard bore valves. 2-sided nylon bar, one side calibrated 10–150
psi in 2 lb. units. Numbers at 10 lb. intervals.
Other side kPa 80–1040
VH669 “STRAIGHT PUSH-ON 30° REVERSE ANGLE TRUCK GAUGE, 4-sidednylon bar, 2 sides calibrated 20–120 psi in 2 lb. units.
Other 2 sides kPa 150–810
Code Description
VHP698 DUAL FOOT STRAIGHT PUSH-ON 30° REVERSE ,ANGLE LOCK-ON
CHUCK, tapered head design for a positive valve contact. Straight on
30° REVERSE angle chuck with threaded deep well lock nut which lock
on to valves when tilted 1/4”” female N.P.T 6”” - 150mm long
VH420C Condor Brass Truck gauge 0-120PSI
Code Description
VH900 10 Coloured Pencil Gauge display card.
Code Description
ALG3JO3 TDR 2000 Tyre Inflator, 0-138PSI, (0-960KPA)
Air Gauges
VHP698
VH420C
VH664
VH661
VH663
VH660
VH666 VHJ6111
VHJ667
VHJ6110
VH900
ALG3J03
VH668
VH669
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 85/96
Page
85www.repcotrp.com.au
AIR SERVICE PRODUCTS
Code Description
VH1976 Quicker Pressure Gauge 10-60 PSI
VH1991 Michelin Inflation Gauge Bar (0,7-12), PSI (10-174)
VH1930 Dial Gauge with swivel chuck suit both standard
and large bore valve
VH1950 Dial Gauge with dual foot chuck for standard bore
valves
Code Description
11-0512 Digital Pro gauge
• Large LCD display screen powered by 2 x AAA alkaline batteries
(included)
• High strength ABS fibreglass reinforced body
• Impact absorbing rubber protector with non-slip handle
• 500 mm rubber hose with clip-on swivel chuck
• 1/4” BSP male air Inlet thread
• Easy to use inflate trigger and deflate button
• ON / OFF button with LIGHT
• 4 function SCALE button with ZERO reset
• 0 – 160 p.s.i
• 0 – 11.03 bar
• 0 – 11.25 kg/cm
•
20 – 1103 kPA
Code Description
11-0545 Digital Automatic Tyre Inflator
• Aluminium die cast housing
• Mechanical anti-vandal buttons
• IP66 rated for indoor and outdoor use
• Large backlit LCD display with audible warning
•
Comprehensive diagnostics and error reporting• Accuracy ± 0.3 p.s.i.
• Units of measure: bar, p.s.i., kPa, kg/cm²
• Inflation range
• 0.5-10 bar
• 0-145 p.s.i.
• 0-1000 kPa
• 0-10 kg/cm²
• Inflates accurately with hoses up to 50 m long
• Flat tyre function
• Over pressure function
• Includes Nitto equivalent adaptor
VH1950 VH1991
11-0512
11-0545
Air Gauges
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 86/96
www.repcotrp.com.auPage
86
AIR SERVICE PRODUCTS
Code Description
5131 Large Bore thread depth gauge
• Two piece gauge made up of slide tube and indicator.
• Calibrated 0-6” in 1/32” units and 7 to 152 mm
• metric. Tubing spans tread lugs on off-road tyres.
Code Description
N-1410 Off Highway tyre tread depth gauge
• Indicating bar is calibrated with 32nds on one
• side, other side is millimeters. Has magnified
• sight-glass for easy readability. Comes with a
• carrying holster. The finest instrument available.
Code Description
KCG KEY CHAIN GAUGE, Large, easy to read LCD display. Automatic on / off (automatic shutt off thime: 1.5 seconds). Range: 10 - 60 PSI or
0.5 - 4.2 BAR.
Code Description
TAC 12 V MINI AIR COMPRESSOR WITH CASE. Offers a preset auto stop
function. Operates from 12 Volt, 10 AMPS DC Power via a 12V ciga-rette lighter. Accessories: 2 Nozzle Adaptors, 1 Sports Needle, 320cm
Power Cord with Plug and 76 cm Air Hose.
Code Description
N-1420H Truck tread depth gauge
• Calibrated in millimeters and 1/32nds of an inch.
• Measures shoulder wear as well as tread depth.
• Durable metal construction, chrome-plated.
• Comes in a clear protective plastic pouch.
• Can be custom imprinted.
• Pocket-size.
Air Gauges
5131
N-1410
N-1420H
KCG
TAC
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 87/96
Page
87www.repcotrp.com.au
TYRE REPAIR PRODUCTS
BEAD SAVER SYSTEM 12880The patented design of Gaither’s Bead Saver System has become the industry standard for chaning tubeless truck tyres. By using simple principles of leverage, the Bead Saver System actually workswith the tyre and rim to do the work for you, in less time, with less strain, at a fraction of the cost of tyrechaning machines. The Bead Saver System mounts and dismounts all tubeless truck tyres from 17.5” to 24.5” and all super singles. It’s the safest, fastest, and easiest way ever invented to change tubeless truck tyres - guaranteed not to damage tyre beads.
BEAD VICE BV-04Gaither’s Bead Vice is a patented product that was designed to accommodate the new EVA wheels that first appeared in Europe several years ago. The trend in Europe, and recently throughout theworld, has been to move towards using disc breaks on all large commercial vehicles. These discbreaks require a special wheel assembly that allows for more cooling and protection for the valvestem. These wheels are referred to as the EVA (external valve assemply) or “Hump” wheels. To protect the valve stem,, a “hump” was built just inside the flange of the wheel making it impossible to break thebead loose from the wheel, and therefore dismounting the tyre without the help of the Bead Vice. Thepatented Bead Vice quickly and safely breaks the bead free on all new EVA wheels.
BEADKEEPER 12894 / 12894C / 12894CWGaither’s Beadkeeper is the original tool for assisting in the mountingprocess. Being made of drop-forged steel, the Beadkeeper simply locksonto the flange of the wheel and holds the tyre bead in place to eliminate
standing on the tyre and/or chasing the bead around the wheel.
There are 3 versions of Gaither’s Beadkeeper. The original (12894) ismade of drop-forged steel, the Rubberhead (12894c) is coated to protect
Aluminium wheels from being scratched, and the Wide Keepers (12894CW).
E-ZTwo Models: Lever operation and push button operation.
Blasts air between the tyre and wheel, allowing the tyre bead toseat against the wheel flange. Universal use for truck, auto, quad,
tractor, etc.
Tank capacity 5 gallons (19 litres). Full CEE Certification.
BEAD BAZOOKA™ XLAutomatic Rapid Air Release System makes it the most powerful bead-seatingdevice in the market.
Easy-to-handle tank allows for comfortable operation in shop and service truck.
BB6 L *Light weight (12.25lbs.) reduces stress on technician.
BB9 L *Light weight (15lbs.) reduces stress on technician.
Push-button trigger allows technician to keep both hands on the tank for morecontrol,release tanks making it safer than manual.
Slotted” Double Barrel directs the air for best overall lift.
Gaither’s Bead Systems
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 88/96
www.repcotrp.com.auPage
88
TYRE REPAIR PRODUCTS
Rillfit 6 TyreRegroover
The Rillfit Six Tyre Regroover allows truck operators to extend the useful life of tyres
by re-cutting tread pat- terns. Many truck operators throw away some 5 or 6 mm of
usable tread by scrapping tyres which are worn down or by sending them away for
re-moulding. The extra wear lies in the reserve depth of rubber below the original
tread pattern which can be converted to useable mileage by regrooving. Typically,
a new truck tyre can be re-cut to a depth of 3 – 4 mm below the case of the original
grooves.
• Hitech toroidal power transformer with thermoswitch
for safe and powerful non- stop cutting
• Super exible connection-cable, ergo- nomic and
user friendly
• Ergonomic handgrip
• Water resistant transformer casting and high standard
temperature preset- switch.
• Additional blade adjustment pattern
• A wide range of RILLCUT blade proles available
BLADE TYPE R1 R2 R3 R4 R5
ROUND BLADES mm mm mm mm mm
A 3 5 6 8 10
B 7 7 10 12 12
C 5 8 15 16 18
D 21 21 23 25 24
pcs per set 20
BLADE TYPE W1 W2 W3 W4 W5 W6
ANGLES BLADES mm mm mm mm mm
A 3 5 7 9 11 23
B 7 7 10 12 12 12
C 5 6 10 13 15 28
D 21 21 22 24 23 24
pcs per set 20 10
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 89/96
Page
89www.repcotrp.com.au
09.......................................................4
10.......................................................4
11.......................................................4
12.......................................................4
13.......................................................4
14.......................................................415.......................................................4
16.......................................................4
17.......................................................4
18.......................................................4
19.......................................................4
20.......................................................4
32.8501............................................52
58.1034............................................66
58.1056............................................66
100...................................................31
111.....................................................4
115.....................................................4
116.....................................................4
164.....................................................9
165.....................................................9
166.....................................................9
167.....................................................9
169.....................................................9
170.....................................................9
172.....................................................9
172.....................................................9
174.....................................................9
176...................................................10
177...................................................10
178...................................................10
179...................................................10
180...................................................10
182...................................................10
184...................................................10186...................................................10
196...................................................10
197...................................................10
198...................................................10
199...................................................10
220...................................................24
222...................................................24
224...................................................24
226...................................................24
253.....................................................7
254.....................................................7
262.....................................................6
263.....................................................6
263.....................................................7
264.....................................................6
264.....................................................7
269.....................................................5
269...................................................25
270.....................................................5
271.....................................................5
271.....................................................6
271...................................................25
272.....................................................5
272.....................................................6
400...................................................31
467...................................................38
469...................................................38
500...................................................31
600.....................................................6601.....................................................6
602.....................................................6
603...................................................18
604...................................................18
605...................................................18
606...................................................18
607...................................................18608...................................................18
609...................................................18
610...................................................18
620...................................................18
621...................................................18
622...................................................18
623...................................................18
624...................................................18
625...................................................18
626...................................................18
627...................................................18
704.....................................................9
704...................................................33
711...................................................35
714...................................................35
720...................................................34
721...................................................34
722...................................................34
723...................................................34
735.....................................................9
738.....................................................9
738...................................................33
739...................................................33
743...................................................34
745...................................................34
751.....................................................9
751...................................................33
760.....................................................9
760...................................................33761...................................................33
765...................................................33
766...................................................33
767...................................................33
770...................................................24
770...................................................33
775...................................................33
776...................................................33
849...................................................36
850...................................................36
854...................................................37
855...................................................36
858...................................................37
859...................................................37
861...................................................36
862...................................................36
863...................................................36
864...................................................36
865...................................................36
866...................................................36
867...................................................36
868...................................................36
869...................................................36
870...................................................36
872...................................................26
883...................................................26
885...................................................26
896...................................................26
898...................................................26900...................................................32
901...................................................32
905...................................................32
911.....................................................5
911.....................................................6
911...................................................24
912.....................................................5913...................................................32
914...................................................24
915...................................................24
915...................................................32
916...................................................24
916...................................................32
918...................................................32
919...................................................32
925...................................................24
926...................................................24
927...................................................24
928...................................................24
931...................................................32
933...................................................32
935...................................................32
936...................................................32
938...................................................32
939...................................................32
940...................................................38
941...................................................38
942...................................................38
949...................................................39
951...................................................39
964...................................................34
966...................................................32
969...................................................33
971...................................................34
973...................................................32
974...................................................32975...................................................33
985...................................................32
986...................................................32
987...................................................32
1051.................................................52
1052.................................................52
1082.................................................33
1526.................................................79
2000...................................................4
2000.................................................54
2019.................................................52
2020.................................................52
2027.................................................52
2061.................................................52
2064.................................................52
2066.................................................48
2211...................................................4
2211.................................................54
3111.................................................40
3211.................................................40
3213.................................................40
3511.................................................40
3513.................................................40
3812.................................................40
3816.................................................40
4012.................................................40
4014.................................................40
4213.................................................40
4214.................................................404215.................................................40
4215.................................................40
4413.................................................40
4415.................................................40
4416.................................................40
4814.................................................40
5131.................................................866214...................................................4
6214.................................................54
9000.................................................49
12880...............................................87
12894...............................................87
13000...............................................36
13000...............................................38
13004...............................................38
42000...............................................34
45040...............................................34
110006.............................................34
113300.............................................74
113303.............................................74
113304.............................................74
113305.............................................74
113306.............................................74
236671.............................................39
236688.............................................39
000448.............................................55
000449.............................................55
000450.............................................55
000451.............................................55
000452.............................................55
000453.............................................55
000454.............................................55
000455.............................................55
000456.............................................55
000457.............................................55
000458.............................................55000459.............................................55
000460.............................................55
000487.............................................56
000488.............................................56
000489A ..........................................56
000490.............................................56
000491.............................................56
000492.............................................56
000493.............................................56
000494.............................................56
000495.............................................56
000496.............................................56
000497.............................................56
000498.............................................56
000499.............................................56
000500.............................................56
000505.............................................56
000509.............................................56
000512.............................................56
000513.............................................56
000514.............................................56
000G CAR .......................................55
005G CAR .......................................55
010G CAR .......................................55
015G CAR .......................................55
020G CAR .......................................55
0211308...........................................76
0221107...........................................76
0252137...........................................59
PRODUCT INDEX
Cat No. ..................................Page Cat No. ..................................PageCat No. ..................................Page Cat No. ..................................Page
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 90/96
www.repcotrp.com.auPage
90
0252137...........................................76
025G CAR .......................................55
028G LT .................... .................... ...57
03-0446 ...........................................52
030G CAR .......................................55
035G CAR .......................................55040G CAR .......................................55
0441808...........................................76
0441809...........................................76
0441908...........................................76
0441916...........................................76
0441922...........................................76
045G CAR .......................................55
050G CAR .......................................55
0531017...........................................74
0531019...........................................74
0531021...........................................74
0531022...........................................74
0531023...........................................74
0531117...........................................74
0531119...........................................74
0531121...........................................74
0531122...........................................74
0531123...........................................74
0531909...........................................74
0541019...........................................75
0541026...........................................75
0541027...........................................75
0541028...........................................75
0541029...........................................75
0541032...........................................75
0541033...........................................75
0541035...........................................75
0541036...........................................75
0541038...........................................750541041...........................................75
0541838...........................................75
0541856...........................................75
0541858...........................................75
0541860...........................................75
0541862...........................................75
0541864...........................................75
0541866...........................................75
0541868...........................................75
0541872...........................................75
0541874...........................................75
0541907...........................................75
0541908...........................................75
0541912...........................................75
0541920...........................................75
0551917...........................................75
055G CAR .......................................55
055G HT ..........................................57
055G LT .................... .................... ...57
060G CAR .......................................55
070G CAR .......................................55
0772380...........................................76
0772381...........................................76
0772382...........................................76
0772383...........................................76
080G CAR .......................................55
085G LT .................... .................... ...57
10T ....................................................4
11-0512 ...........................................8511-0545 ...........................................85
111-005G ........................................58
111-010G ........................................58
111-015G ........................................58
111-020G ........................................58
111-025G ........................................58
111-030G ........................................58111-035G ........................................58
111-040G ........................................58
111-045G ........................................58
111-050G ........................................58
111-055G ........................................58
111-060G ........................................58
111R ................................................11
113G CAR .......................................55
113G HT ..........................................57
113G LT .................... ..................... ..57
117NB ...............................................4
11T ....................................................4
12894C ............................................87
12894CW ........................................87
12T ....................................................4
13T ....................................................4
142G LT .................... ..................... ..57
1504A ..............................................79
164R ................................................11
165T ..................................................9
166R ................................................11
169R ................................................11
16T ....................................................4
170G HT ..........................................57
170G LT .................... ..................... ..57
170R ................................................11
172R ................................................11
174R ................................................11
176R ................................................111772D ..............................................62
177R ................................................11
1784D ..............................................62
178R ................................................11
179R ................................................11
17T ....................................................4
180R ................................................11
182R ................................................11
184R ................................................11
186R ................................................11
2023 GREEN ...................................52
2023 RED ........................................52
2023K1 ............................................52
20PF ................................................65
20PH ...............................................65
20PM ..............................................65
20SF ................................................65
20SH ...............................................65
20SM ..............................................65
227G HT ..........................................57
249UL ................................................5
250-1UL ............................................6
250ULA .............................................5
251-1UL ............................................6
251-1UL ............................................6
251ULA .............................................5
252-1 .................................................6
253-1 .................................................6
254-1 .................................................6254HD ...............................................7
271/38 ...............................................5
271/38 ...............................................6
283G HT ..........................................57
290UL ................................................5
291-1UL ............................................6
291UL ................................................5292UL ................................................5
30 06020..........................................66
30 08020..........................................66
30 10020..........................................66
30PF ................................................65
30PH ...............................................65
30PM ..............................................65
30SF ................................................65
30SH ...............................................65
30SM ..............................................65
320 1003 .................... .................64
320 1004 .................... .................64
320 1005 .................... .................64
320 1152 ................... .................64
320 1154 ................... .................64
320 1154 ................... .................64
320 1155 .................... .................64
320 1155 ................... .................64
320 1202 .................... .................64
320 5002 ................... .................64
320 5004 ................... .................64
320 5005 ................... .................64
320 5152 ................... .................64
320 5154 ................... .................64
320 5155 ................... .................64
320 5202 ................... .................64
340G HT ..........................................57
3801-R.............................................76
4 AR ................................................7740PF ................................................65
40PH ...............................................65
40PM ..............................................65
40SF ................................................65
40SH ...............................................65
40SM ..............................................65
4321C ..............................................79
45-698L ...........................................41
45-741 .............................................38
45-741 .............................................41
4R ....................................................77
5095A ..............................................62
53-1802 ...........................................66
53-1803 ...........................................66
53-1804 ...........................................66
53-1805 ...........................................66
5R ....................................................77
5TL600 ............................................76
603R ................................................19
604R ................................................19
605R ................................................19
606R ................................................19
607R ................................................19
608R ................................................19
609R ................................................19
610-005G ........................................58
610-010G ........................................58
610-015G ........................................58
610-020G ........................................58610-025G ........................................58
610-030G ........................................58
610-035G ........................................58
610-040G ........................................58
610-045G ........................................58
610-050G ........................................58
610-055G ........................................58610-060G ........................................58
610R ................................................19
704A ..................................................9
704A ................................................33
704C ................................................33
704G ................................................33
706-1 ...............................................33
707HD .............................................35
707HD-5G .......................................35
708HD .............................................35
709HD .............................................35
720-5 ...............................................34
725M ...............................................34
743SP..............................................34
783-5E .............................................34
86/10B.............................................41
867-12 .............................................50
867-16 .............................................50
867-3 ...............................................50
867-4 ...............................................50
867-6 ...............................................50
9010-0 .............................................49
9011-0 .............................................49
9014-0 .............................................49
9015-0 .............................................49
9022-0 .............................................49
9023-0 .............................................49
9024-21.5 ........................................49
9030-0 .............................................49925E ................................................24
925T ................................................24
925T ................................................24
968B ................................................33
968LB ..............................................33
AL-1213 ..........................................68
AL-1320 ..........................................68
ALG3JO3 ........................................84
AT-3302 .......................... .................41
AWS1 .............................................34
AWS5 .............................................34
AX60U.............................................15
B3 ....................................................25
B6 ....................................................25
B8 ....................................................25
BB LIGHT .......................................39
BB10107 .........................................73
BB10312 .........................................73
BB10501 .........................................73
BB10505 .........................................73
BB12SSM ......................................74
BB13047 .........................................77
BB1505B ........................................80
BB1510B ........................................80
BB2010 ...........................................81
BB20SQ ..........................................79
BB20TB ..........................................79
BB22SSM ......................................74
BB254 .............................................73
PRODUCT INDEX
Cat No. ..................................Page Cat No. ..................................PageCat No. ..................................Page Cat No. ..................................Page
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 91/96
Page
91www.repcotrp.com.au
BB31 ...............................................61
BB32 ...............................................61
BB34 ...............................................61
BB34SSM ......................................75
BB36 ...............................................61
BB37 ...............................................61BB38 ...............................................61
BB39 ...............................................61
BB40 ...............................................61
BB41 ...............................................61
BB42 ...............................................61
BB43 ...............................................61
BB44 ...............................................61
BB4PCSS .......................................74
BB5PCSSFL ...................................75
BB6L ...............................................87
BB70150 .........................................76
BB70160 .........................................73
BB8PCST .......................................74
BB8PCST .......................................74
BB9L ...............................................87
BBCP34-11.....................................75
BBSS12 ..........................................76
BG5002 ...........................................38
BL5-10 ............................................59
BLV601 ...........................................48
BN18 ...............................................37
BN18 ...............................................37
BS100 .............................................59
BS100 .............................................59
BS25 ...............................................59
BS50N ............................................59
BT18................................................37
BTLG-125/10# ................................37
CNP.................................................59CNP.................................................76
CONTEGO GLOVES.......................39
CP-871 ............................................71
CP-873 ............................................71
CP749..............................................71
CP749-2 ..........................................71
CP772..............................................71
CP772-6 ..........................................71
CP7733............................................71
CP7733-2 ........................................71
CP7763............................................71
CP7780-6 ........................................70
CP7782-6 ........................................70
CR14................................................83
DP10A2...........................................83
DSF/12.5 .........................................66
E-Z...................................................87
E-Z PUSH BUTTON ......................87
GH100 .............................................37
GH200 .............................................37
GH218 .............................................37
GTPMS ...........................................61
H-41 ................................................50
H-42 ................................................50
H-45 ................................................50
H538 ................................................66
H539 ................................................66
HBNXLO .........................................80
HT028..............................................76HUSXLO .........................................80
I10 ...................................................83
IMT 1000 ........................................72
IMT 150 ..........................................72
IMT 1800 ........................................72
IMT 200 ..........................................72
IMT 210 ..........................................72IMT 300 ..........................................72
IMT 55 TON ...................................72
J82L ................................................76
JMRH .............................................76
JMRM ............................................76
K-10.................................................78
K-15.................................................78
K-2...................................................78
K-20.................................................78
K-30.................................................78
K-30.................................................78
KCG .................................................86
KI-23-6 ............................................69
KI-30 ...............................................69
KI-30-6 ............................................69
KI-36 ...............................................68
KI-36-6 ............................................68
KL-10...............................................78
KL-15...............................................78
KL-2.................................................78
KL-20...............................................78
LB100 ..............................................57
LB125 ..............................................57
LB150 ..............................................57
LRR..................................................36
M1015 .............................................41
M805 ...............................................34
MARKALL W .................................39
MARKALL Y ...................................39MC10 ..............................................56
MC15 ..............................................56
MC20 ..............................................56
MC25 ..............................................56
MCC10 ............................................56
MCC15 ............................................56
MCC20 ............................................56
MCC25 ............................................56
MICHELIN-F ..................................76
MICHELIN-H..................................76
MPDWD1 .......................................62
MT...................................................27
MT-FORCE .....................................76
MT-HAULTE .......................... .........76
MTL1...............................................76
MTL2...............................................76
N-1410 ............................................86
N-1420H .........................................86
NINJA GLOVES.............................39
NINJA XL .......................................39
P-6...................................................40
P3-20...............................................40
PFC17SQ ........................................75
PFC19.21.........................................75
PFC19SQ ........................................75
PFC21SQ ........................................75
PFC35.17.........................................75
PFC38.20.........................................75
PFC41.21.........................................75PT900-KIT ......................................41
PT900-KIT ......................................68
QFR LARGE ....................................39
QFR X LARGE.................................39
R-525...............................................51
R1 ....................................................88
R115-25...........................................40R2 ....................................................88
R201S..............................................63
R202S..............................................63
R203S..............................................63
R206A .............................................63
R207 ................................................63
R208 ................................................63
R209 ................................................63
R210 ................................................63
R3 ....................................................88
R302 ................................................63
R304 ................................................63
R306 ................................................63
R308 ................................................63
R310 ................................................63
R320 ................................................63
R322 ................................................63
R4 ....................................................88
R4-16...............................................40
R4-20...............................................40
R4-20U ............................................40
R4-25...............................................40
R4-9.................................................40
R417A .............................................63
R420PF............................................63
R420PH ...........................................63
R420PM ................... .................... ...63
R420SF............................................63
R420SH ...........................................63R420SM ................... .................... ...63
R425PH ...........................................63
R425SH ...........................................63
R430PF............................................63
R430PH ...........................................63
R430PM ................... .................... ...63
R430SF............................................63
R430SH ...........................................63
R440PF............................................63
R440PH ...........................................63
R440PM .................. ..................... ...63
R440SF............................................63
R440SH ...........................................63
R440SM .................. .................... ....63
R5 ....................................................88
R520 ................................................51
RAD330...........................................67
RADG1143 ......................................67
RADGK067 .....................................67
RAH720...........................................67
RARW2150A ..................................67
RARW2150B ..................................67
RASTD10 ........................................62
RASTD6 ..........................................62
RCIW2360 ......................................69
RCIW2360-2 ................. ..................69
RCIW661 ........................................69
RCLIWA .................. .................... ....70
RCLIWV ..........................................70RCRW951 .......................................67
RG105 .............................................67
RH102 .............................................43
RH104 .............................................43
RH107 .............................................43
RH109 .............................................43
RH111 .............................................43RH120 .............................................43
RH122 .............................................43
RH140 .............................................43
RILLFIT 6 ........................................88
RIW124 ...........................................67
RIW260 ...........................................69
RIW260-2 .......................................69
RIW3125 .........................................69
RIW460 ...........................................69
RJA20T ...........................................81
RJAB12T ........................................82
RJAB20T ........................................82
RJB12THP......................................78
RJB12TLP ......................................78
RJB20THP......................................78
RJB20TLP ......................................78
RJF1.5T...........................................82
RJF2.5T...........................................82
RJLC10T .........................................82
RJLC5T ...........................................82
RSB3 .............................................42
RTTJ1 .............................................82
S/O 10G ..........................................57
S/O 15G ..........................................57
S1010 ..............................................42
S1040 ................................................5
S1040 ................................................6
S1040 ..............................................42
S1041 ................................................5S1041 ................................................6
S1041 ..............................................42
S1041/38 ...........................................6
S1041/38 ................... .................... ..42
S1043 ................................................5
S1043 ..............................................42
S1043/38 ...........................................5
S1044 ..............................................42
S1045 ..............................................42
S1046 ..............................................42
S1046D ...........................................42
S1047 ..............................................42
S1047XL..........................................42
S1048 ..............................................42
S1049 ..............................................42
S180 ................................................38
S2000 ..............................................43
S2001 ..............................................43
S2002 ..............................................43
S2003 ..............................................43
S2004 ..............................................43
S2005 ..............................................43
S2006 ..............................................43
S2007 ..............................................43
S2008 ..............................................43
S2009 ..............................................43
S2010 ..............................................43
S2020 ..............................................43
S2040 ..............................................43
Cat No. ..................................Page Cat No. ..................................PageCat No. ..................................Page Cat No. ..................................Page
PRODUCT INDEX
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 92/96
www.repcotrp.com.auPage
92
S2042-12.........................................43
S2045 ..............................................43
S2655 ..............................................36
S870 ...............................................41
S872 ...............................................41
S873 ................................................41S874 ...............................................41
S875 ................................................41
S879 ................................................41
S890 ................................................42
S891 ................................................42
S892 ...............................................42
S893 ................................................42
S894 ...............................................42
S896 ..............................................42
S897 ................................................42
S898 .............................................42
S921 ................................................39
S923 ................................................39
S923 ................................................41
S924 ................................................39
S924 ................................................41
S999 ................................................38
SIP ..................................................39
SK12R .............................................19
SK16R .............................................19
SK20R .............................................19
SK24R .............................................19
SMART 1 ........................................40
SMART 11 ......................................40
SS10................................................38
SS100..............................................59
SUPREME TYRE BLACK ..............34
SUPREME TYRE BLACK ..............41
T-81 .................................................51T-82 .................................................51
T032 ................................................27
T057 ................................................27
T057 ................................................28
T060 ................................................27
T060 ................................................28
T063 ................................................27
T063 ................................................28
T064 ................................................27
T064 ................................................28
T119 ................................................27
T119 ................................................28
T121 ................................................27
T121 ................................................28
T125 ................................................27
T145 ................................................27
T145 ................................................28
T156 ................................................28
T192 ................................................27
T192 ................................................28
T220 ................................................27
T220 ................................................28
T226 ................................................27
T227 ................................................27
T227 ................................................28
T228 ................................................27
T228 ................................................28
T229 ................................................27
T229 ................................................28T230 ................................................27
T239 ................................................28
T240 ................................................28
T274 ................................................27
T274 ................................................28
T277 ................................................27
T277 ................................................28T277 ................................................28
T280 ................................................27
T280 ................................................28
T281 ................................................27
T281 ................................................28
TAC .................................................86
TB270..............................................24
TB270..............................................25
TCG .................................................37
TCW210 ..........................................42
TCW210/16.....................................42
TCW315 ..........................................42
TCW415 ..........................................42
TG11E .............................................76
TG11EH...........................................76
TI450A ............................................76
TL-A3020 ........................................79
TL100 ..............................................35
TL150 ..............................................35
TL200 ..............................................35
TL250 ..............................................35
TLP60 ..............................................35
TM300.............................................35
TM400.............................................35
TM500.............................................35
TOR1 ...............................................22
TOR10 .............................................22
TOR11 .............................................22
TOR2 ...............................................22TOR3 ...............................................22
TOR4 ...............................................22
TOR5 ...............................................22
TOR6 ...............................................22
TOR7 ...............................................22
TOR8 ...............................................22
TOR9 ...............................................22
TP6000 ............................................35
TP7000 ............................................35
TP9000 ............................................35
TR12008 ..........................................44
TR413 CS ........................................44
TR413 SHORT SLEEVE .................44
TRJ690............................................51
TRJ691............................................51
TRJ692............................................51
TRR .................................................36
TRUCK-100G ................... ...............57
TRUCK-150G ................... ...............57
TRUCK-200G ................... ...............57
TRUCK-250G ................... ...............57
TRUCK-300G ................... ...............57
TRUCK-50G ....................................57
TRUCK-75G ....................................57
TTHB-1 ...........................................41
TV-002 ............................................44
TV-002C ..........................................44
TV-003 ............................................44
TV-003C ..........................................44TV-003DD .......................................44
TV-003SP .......................................44
TV-005 ............................................44
TV-008 ............................................44
TV-008C ..........................................44
TV-008DD .......................................44
TV-008SP .......................................44TV-010 ............................................45
TV-012 ............................................45
TV-013L ..........................................45
TV-013S ..........................................45
TV-014 ............................................45
TV-015A ................... .................... ...45
TV-018A ................... .................... ...44
TV-020 ............................................45
TV-021 ............................................45
TV-025 ............................................45
TV-026 ............................................45
TV-027 ............................................45
TV-028 ............................................45
TV-028A ................... .................... ...45
TV-029 ............................................45
TV-030 ............................................46
TV-031 ............................................46
TV-032 ............................................46
TV-033 ............................................46
TV-033L ..........................................46
TV-034 ............................................46
TV-035 ............................................47
TV-036 ............................................47
TV-037 ............................................47
TV-040 ............................................46
TV-041 ............................................46
TV-043 ............................................46
TV-046 ............................................47
TV-047 ............................................47TV-050 ............................................47
TV-542 ............................................46
TV-543 ............................................46
TV-543C ..........................................46
TV-544 ............................................46
TV-545 ............................................46
TV623A ...........................................48
TY13570 ..........................................41
TYRE SHINE...................................34
UG-65ER .........................................70
ULTRA 11 .................... ....................40
UWT1000........................................59
UWT1000........................................76
UWT2000........................................59
UWT2000........................................76
UWT3000........................................59
VE-2160 ..........................................53
VE-2165 ..........................................53
VE-2170 ..........................................53
VE-2190 ..........................................53
VE-2210 ..........................................53
VE-2212 ..........................................53
VE-2222 ..........................................53
VE-2223 ..........................................53
VE-2224 ..........................................53
VE-2226 ..........................................53
VE-5102B........................................52
VE-5103B........................................52
VE-5104B........................................52VE-5105B........................................52
VH1700 ...........................................53
VH1701 ...........................................53
VH1703 ...........................................53
VH1801 ...........................................52
VH1930 ...........................................85
VH1950 ...........................................85VH1976 ...........................................85
VH1991 ...........................................85
VH3216 ...........................................52
VH420C ...........................................84
VH580 .............................................48
VH580A...........................................48
VH582 .............................................48
VH600HP ........................................44
VH602HP ........................................44
VH604 .............................................53
VH605W .........................................54
VH606 .............................................54
VH660 .............................................84
VH661 .............................................84
VH663 .............................................84
VH664 .............................................84
VH666 .............................................84
VH667 .............................................84
VH668 .............................................84
VH669 .............................................84
VH672 .............................................54
VH672P ...........................................54
VH672R ...........................................54
VH677 .............................................54
VH691 .............................................52
VH694 .............................................52
VH695 .............................................52
VH900 .............................................84
VHJ6102 .........................................52VHJ6105 .........................................52
VHJ6110 .........................................84
VHJ6111 .........................................84
VHP698 ...........................................84
W1...................................................88
W1800.............................................53
W2...................................................88
W3...................................................88
W4...................................................88
W4025.............................................51
W4040.............................................51
W4451.............................................51
W4452.............................................51
W4455.............................................51
W5...................................................88
W527...............................................44
W6...................................................88
WH4502 1/2....................................50
WH4504 ..........................................50
WH4505 ..........................................50
WH4506 ..........................................50
WH4508 ..........................................50
WH4518 ..........................................50
WH4524 ..........................................50
WH4526 ..........................................50
WH4528 ..........................................50
WH5-10 ..........................................59
XS608..............................................75
PRODUCT INDEX
Cat No. ..................................Page Cat No. ..................................PageCat No. ..................................Page Cat No. ..................................Page
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 93/96
Page
93www.repcotrp.com.au
PRODUCT INDEX
1/2” DRIVE DEEP IMPACT SOCKETS METRIC ..................74
1/2” DRIVE THIN WALL DEEP IMPACT SOCKETSMETRIC WITH PLASTIC SLEEVE ........................................74
200 AUTOMATIC COUPLINGS .............................................63
3 TON SERVICE JACKS ........................................................79
3/4” DRIVE DEEP IMPACT SOCKETS AF ...........................75
3/4” DRIVE DEEP IMPACT SOCKETS METRIC ..................75
3/4” DRIVE SQUARE SOCKETS IMPACT ...........................75
300 AUTOMATIC COUPLINGS .............................................63
400 AUTOMATIC COUPLINGS .............................................63
5 PIECE SOCKET SET ............................................................75
5-TON AND 10-TON SERVICE JACKS ................................80
A & B COMPOUND TWO-PART CHEMICAL CURE
FILLER RUBBER .....................................................................37ADAPTORS, CHUCKS AND ACCESSORIES ......................42
AIR GAUGES ..........................................................................84
AIR HOSE, CLAMPS & HOSE REEL ....................................66
AIR HYDRAULIC BOTTLE JACKS ........................................79
AIR TOOLS ..............................................................................68
AIR TOOLS & GRINDERS .....................................................70
AIR TOOLS & RETREAD TOOLS ..........................................38
AIR TOOLS CP ........................................................................71
AIR-OPERATED TRUCK TYRE VULCANIZER .....................28
ATV & TYRE REPAIR KITS ....................................................26
AWLS AND PACKING TOOLS ..............................................32
AXLE STANDS ........................................................................62
BEAD BAZOOKA™ XL ..........................................................87
BEAD SAVER SYSTEM 12880 ..............................................87
BEAD VICE BV-04 ..................................................................87
BEADKEEPER 12894 / 12894C / 12894CW ..........................87
BIAS SKIDDER REPAIRS ......................................................19
BOTTLE JACKS ......................................................................82
BP REPAIRS ...........................................................................18BPT BIAS PLY TRACTOR REPAIRS .....................................18
CENTECH CENTRE-OVER-INJURY REPAIR UNITS ..........10
CENTECH CHEMICAL OTR REPAIRS WITH ARAMIDREINFORCEMENT .................................................................13
CENTECH CLOTH BACKED OTR REPAIRS WITHARAMID REINFORCEMENT ................................................13
CENTECH CROWN ONLY REPAIRS WITH ARAMIDREINFORCEMENT .................................................................14
CENTECH CROWN REPAIR UNITS .....................................10
CENTECH HEAT CURE OTR REPAIRS WITH
ARAMID REINFORCEMENT ................................................13
CENTECH NAIL HOLE REPAIR UNITS ..................................9
CENTECH RADIAL AG REPAIRS .........................................10
CENTECH RADIAL REPAIR ....................................................9
CENTECH THERMACURE OTR REPAIRS WITHARAMID REINFORCEMENT ................................................13
CHASSIS JACK ......................................................................82
CHEMICAL CURE INNER LINER REPAIR GUM .................37
CHEMICAL CURE STRIPPING STOCK ................................37
CHROME NUT PULLER .........................................................59
CHROME VANADIUM SOCKETS & EXTENSIONS ...........76
COPPER CONTOUR WHEELS ..............................................42
CORDLESS TOOLS.................................................................70
DIP TANKS .............................................................................61
DUAL WHEEL TROLLEY ........................................................62E-Z............................................................................................87
EASY LEVER WHEEL DOLLIES ............................................62
EASY LEVER WHEEL DOLLIES ............................................62
ECONOMY PLUG PATCH AND CARBIDE CUTTERS .........25
FABRIC REINFORCED RUBBER CUSHION GUM ..............37
FORWARD LIFT VEHICLE HOISTS ......................................83
FLIP SOCKETS IMPACT ........................................................75
FLOOR JACK...........................................................................82
FORWARD LIFT. EXCLUSIVE TO REPCO ............................83
GARAGE JACKS ....................................................................79
GARAGE JACKS ....................................................................80
HEAT CURE INNER LINER REPAIR GUM ...........................37
INNER MOUNTED TUBELESS VALVES .............................45
INSERT & SPIRAL TOOLS ....................................................32
LARGEBORE VALVES ............................................................49
LATEX, NITRILE AND STRONGHOLD GLOVES .................39
LEAD ALLOY RIM WEIGHTS ................................................55
LEAD ALLOY RIM WEIGHTS ................................................58
LEAD FN ALLOY RIM WEIGHTS ..........................................56LEAD HEAVY TRUCK WEIGHTS ..........................................57
LEAD LIGHT TRUCK WEIGHTS ...........................................57
LEAD MOTORCYCLE WEIGHTS ..........................................56
LEAD MOTORCYCLE WEIGHTS ..........................................56
LEAD STEEL RIM WEIGHTS ................................................55
LEAD STEEL RIM WEIGHTS ................................................58
LEAD STICK ON WEIGHTS ..................................................57
LEAD STICK ON WEIGHTS ..................................................59
LEAD TUBELESS TRUCK WEIGHTS ...................................57
Product Group. ................................................................ Page Product Group. ................................................................ Page
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 94/96
www.repcotrp.com.auPage
94
PRODUCT INDEX
MARKING CRAYONS, PAINT STICKS &MARKING PEN ......................................................................39
MASADA BOTTLE JACKS ...................................................78
MEDIUM TRUCK TYRE VULCANIZER ................................27
MISCELLANEOUS TYRE REPAIR TOOLS ...........................32
MOUNTING COMPOUNDS ..................................................34
MULTI-PURPOSE REPAIR UNITS .........................................6
NITTO ADAPTERS .................................................................65
NITTO HI COUPLERS ............................................................65
NORBAR TORQUE WRENCHES ..........................................77
OVAL 2-WAY TUBE REPAIRS .................................................4
PASSENGER TUBELESS VALVES .......................................44
PERMACURE & PERMACURE II REPAIRS ........................24
PERMACURE EARTHMOVER REPAIRS .............................24PERMACURE TRUCK REPAIRS ...........................................24
PINCOTT RASP BLADES, HUBS .........................................40
PTK PERFORMANCE TYRE KIT ...........................................26
RATCHET-STYLE JACK STANDS .........................................62
REPAIR LIGHT & EYE PROTECTION ...................................39
REPCO AIR TOOLS ................................................................67
REPCO BOTTLE JACKS ........................................................78
REPCO PROFESSIONAL LIFTING EQUIPMENT ................82
RETREAD TOOLS & ACCESSORIES ....................................38
RETREADING .........................................................................41
ROBBINS ENVELOPES .........................................................40
ROUND 2-WAY TUBE REPAIRS .............................................4
RUB-O-MATIC ........................................................................33
RUBBER HOG .........................................................................43
SAFETY CAGES ......................................................................61
SELSON AIR JACKS .............................................................80
SERIES 320 CEJN AIR FITTINGS ........................................64
SKIVING KNIVES & SCISSORS ...........................................38
STEEL STICK ON WEIGHTS .................................................59STITCHERS AND SCRAPERS ..............................................32
TECH 100 LOCKING REPAIR CABINET ...............................31
TECH 2-WAY® TUBE REPAIRS*,ALL-PURPOSE REPAIRS ........................................................4
TECH 400 STORAGE CABINET ............................................31
TECH 500 PROFESSIONAL REPAIR TOOL STATION .........31
TECH ALL-PURPOSE REPAIRS ..............................................4
TECH CHEMICALS...................................................................9
TECH CHEMICALS.................................................................33
TECH EXTRUDER GUNS .......................................................38TECH ROPE RUBBER ............................................................36
TECH TYRE BALANCING COMPOUND ..............................35
TECH TYRE SEALANT ...........................................................35
TECH VULCANIZING FLUIDS ..............................................33
TECH VULCANIZING FLUIDS ..............................................33THERMACURE BP REPAIRS ................................................19
THERMACURE CENTRE-OVER-INJURY REPAIRS ...........11
THERMACURE CROWN REPAIRS ......................................11
THERMACURE NAIL HOLE REPAIRS .................................11
TOR CHEMICAL REPAIRS ....................................................21
TOR CLOTH BACKED REPAIRS ...........................................21
TOR HEAT CURE REPAIRS ...................................................22
TOR THERMACURE REPAIRS ..............................................21
TORSION BARS .....................................................................74
TOYOTA STEEL RIM WEIGHTS ...........................................56
TRUCK NAIL HOLE REPAIR KIT ...........................................26
TUBE REPLACEMENT VALVES .............................................4
TUBELESS VALVES FOR TRUCK .........................................46
TUBELESS VALVES FOR TRUCK .........................................47
TUBELESS VALVES FOR TRUCK & BUS ............................45
TURRET VALVES ....................................................................51
TWO-SPEED 3½ TON SERVICE JACK ................................79
TYRE DRESSINGS .................................................................34
TYRE LEVERS /SLIDE HAMMER .........................................76TYRE SPREADERS .................................................................61
TYRE TOOL PRODUCTS ........................................................72
UNI-SEAL BIAS REPAIRS ......................................................7
UNI-SEAL STEMS FOR LARGE 2-PIECE REPAIR ................6
UNI-SEAL ULTRA STEMS FOR 2-PIECE REPAIR ................6
UNI-SEAL® ULTRA MAX REPAIRS FOR RADIALAND BIAS TYRES ....................................................................5
UNI-SEAL® ULTRA REPAIRS FOR RADIALAND BIAS TYRES ....................................................................5
VALVE EXTENSIONS.............................................................53VALVE EXTENSIONS & CLIPS .............................................51
VALVE TOOLS.........................................................................53
VALVES FOR TRACTORS ......................................................48
VUL-GUM CUSHION GUM ...................................................36
VUL-GUM STRIPPING STOCK ............................................36
WHEEL WEIGHT HAMMER .................................................59
WHEEL WEIGHT PLIERS ......................................................59
WHEEL WEIGHT PLIERS ......................................................76
WIRE BRUSHES.....................................................................42
Product Group. ................................................................ Page Product Group. ................................................................ Page
8/20/2019 Repco Tyre Repair 2014
http://slidepdf.com/reader/full/repco-tyre-repair-2014 95/96
Page
95www.repcotrp.com.au
NOTES