research facilities and research institutions …product catalog【research facilities and research...
TRANSCRIPT
・ 研究施設、計測システム向け
19インチラックキャビネット
・ パソコンによるモーション
コントロール、他
・ コアデバイスの開発
Product CatalogResearch facilities and research institutions
Stepping Motor DriverResearch facilities and research institutions
Motion Control
SACLA/SPring-8(Offer:National Research and Development Agency RIKEN)
Vol.5.2
SPring-8
SACLA
19-inch Rack Cabinet
Information about theOther product and service
Motion control for researchfacilities and research institutions
19-inch rack cabinet for Research facilities and measurement system
Motion control by a Personalcomputer. Other.
Development of core devices
・
・
・
2016.05
Product Catalog【Research facilities and research institutions】Vol.5.2
Motion control for research facility and research institutions
●It can be detected Easy assembly and Installation by the
set providing of Driver, cable, 3U shelf board and Rack
●Lineup of stepping motor Driver is DC24V specification
(1-axis, 2-axes) and AC100V specifications (1 axis).
●Dedicated cable also multiple lineup.
●This driver by the original technology is realized
smooth rotation also in the FULL / HALF STEP angle.
132.55m
0.00018 ゚/STEP(1/2,000,000)
5-phase Stepping MotorGDB-5F40
Now, it rises to "one-2,000,000th "
(High resolution, high precision)
・GDB series・GD series
●The GDB-5F series is incorporated in H750v1, H717A.
●The 8-axes driver unit mounted in 3U shelf board drawer type
●A cable and an exclusive rack besides a driver and 3U shelf board drawer type are offered.
●Mounting spaces are sharply reduced by miniaturization of a driver unit.
( Four 2- axes driver + One power supply)
Signal cable
Motor / sensor
H718/GD-5410H-584,AD-5610
Motor/ sensor cable
Controller
J2J1
Single-phase100V(50/60Hz)
・ 1800 mm (36 U) rack 3Ux12step is possible to 96 axes setting (4Ux9 step is 50 axes)
institutions of the National Research and Development Agency.
It is adopted in research institutions of the National Research and Development Agency,SPring-8 and SACLA and gets a high evaluation.
"one-2,000,000th "
●Technology of a "one-400,000th " approved from the research
●19-inch rack(810series)●Shelf board for exclusive use of 3U size (Max8-axes) 1台)●3U size driver H7500v1 x4、 power supply H-539C x1 (A miniaturization, a cost cut)●An exclusive cable (A signal cable, a motor/sensor cable)
<Offer an example of 8-axes>
3U size(max 8-axes)1,800mm (36 U) rack3Ux12step 96 axessetting is possible(4Ux9 step 50axes)
ControllerJ1J2
J2J1
Signal cable
H750V1/GDB-5F40
J1J2
J2J1
Signal cable
H750V1/GDB-5F40
J1J2
J2J1
Signal cable
H750V1/GDB-5F40
J1J2
J2J1
Signal cable
H750V1/GDB-5F40
3U specification
H-539C (power supply)
DC+24V
Motor/ sensor cable
Motor/ sensor cable
Motor/ sensor cable
Motor/ sensor cable
Motor / sensor
Motor / sensor
Motor / sensor
Single-phase100V(50/60Hz)
Motor / sensor
2
Product Catalog【Research facilities and research institutions】Vol.5.2
Motion control for research facility and research institutions
3U specification
Axes 2-axes 1-axis
Applicable Motors 0.75~1.4(A/phase)
Output Current 0.3~1.35(A/phase)
Resolving Ability 2,000,000P/R
1/Divisions 1/1,1/2,1/4,1/10,1/20,1/40,1/100,1/200,1/400,1/800,1/1000,1/2000,1/4000
500KHz
Dimensions H110 × W73 × D190.5 (mm)/1.5Kg H110 × W45 × D190.5(mm)/1.0Kg
Supply Power DC +24V/4.0A DC +24V/2.0A
Applicable Drivers H750V1/GDB-5F40、H717A/GDB-5F40
Supply Power
output voltage DC +24V /MAX4.8A × 2CH
4 Driver(8-axes)
2 Driver(4-axes)
Conditions: Simultaneous DRIVE 2-axes,HOLD 2-axes per 1CH X2ch(J1,J2)
Current capacity Maximum 4.8A
Dimensions H112×W69×D305 (mm)/2.0Kg
4U specification
Axes 1-axis 1-axis
Applicable Motors 0.75~1.4(A/phase) 1.4~2.8(A/phase) 0.75~1.4(A/phase)
Output Current 0.34~1.35(A/phase) 0.34~2.25(A/phase) 0.34~1.35(A/phase)
Resolving Ability 200,000P/R 80,000P/R 20,000P/R
1/Divisions
500KHz 500KHz 6 Driver×2CH
Dimensions H156.5×W62×D190.5(mm) H150 × W65 × D325 (mm) H117 × W45 × D190.5
/1.6Kg /2.8Kg (mm)/1.2Kg
Supply Power DC +24V/2.0A
SPring-8 Appellation MELEC Model Name Axes Applicable Motor Supply Power Based driver*
Type ⅡSPDC H750v1/GDB-5F40 0.75~1.4(A/相) DC+24V Equivalent to GDB-5F40 H-539C、H-539D
Type ⅡSPC H717A/GDB-5F40 0.75~1.4(A/相) DC+24V Equivalent to GDB-5F40 H-539C、H-539D
Type ⅡSP H717/GDB-5411A-00 0.75~1.4(A/相) DC+24V Equivalent to GDB-5411A-00 H-539A
Type ⅠSP H718/GD-5410 0.75~1.4(A/相) AC100V / AC115V Equivalent to GD-5410 -
Type ⅢS H-584,AD-5610 1.4~2.8(A/相) AC100V / AC115V Equivalent to AD-5610 -
*::Torque Characteristics of installed drive are described in the Instructions Manual.
The Instructions Manual can be download from the MELEC-INC. website.
2
1
1
1
1
Maximum responsefrequency
1,2,4,8,10,16,20,40,80,160
Single-phase 100-115V(50/60Hz)/700VA (Exclusive power
supply・・・H-539A)
1/1,1/2,1/4,1/10,1/20,1/40,1/100,1/200,1/400
Single-phase 100V(50/60Hz)/4.1A
Single-phase 100V(50/60Hz)/2.0~2.5A
Single-phase 100-115V(50/60Hz)/220VA
1/1,1/2,1/4,1/10,1/20,1/40,1/100,1/200,1/400
outputvoltage
DC +24V/MAX5.5A × 2CH
Exclusivepowersupply forDrivers
Number that can beinstalled
ApplicableDrivers H717/GDB-5411A-00
SupplyPower
Single-phase 100V(50/60Hz)/4.1A
Maximum responsefrequency
(Exclusive power supply・・・H-539C or H-539D)
(Exclusive power supply・・・H-539C or H-539D)
Exclusive powersupply for Drivers
Exclusive powersupply
Numberthat canbe installed
SimultaneousDRIVE 2-axes,HOLD 4-axesper 1CH
Dimensions H120×W50×D295(mm)/1.7Kg
<H750V1/GDB-5F40> (Type ⅡSPDC)
<H717A/GDB-5F40>(Type ⅡSPC)
<H-539A>(POWER SUPPLY Ⅱ)
<H718/GD-5410>(Type ⅠSP)
<H-584,AD-5610>(Type ⅢS) <H717/GDB-5411A-00>
(Type ⅡSP)
<Pulse input method Stepping Motor Driver >
new product
2-axes 1-axis
DC INPUT TYPE DC INPUT TYPE
AC INPUT TYPE
1-axis
AC INPUT TYPE(High-speed type motor)
1-axis1-axis
DC INPUT TYPE
<H-539D>
new product
<H-539C>(POWER SUPPLY Ⅱ L Type)
・3U size・Low noisespecification
POWER SUPPLY ⅡAC220V INPUT L Type
・AC220V input specifications of H-539C equivalent
(NEMA L6-15R)
3
Product Catalog【Research facilities and research institutions】Vol.5.2
Motion control for research facility and research institutions
● Please contact us for details of specifications to our office.
● Motor / sensor cable and signal cables are custom order.
● Signal cable(SPring-8 connection standards:W021、W022)Other specifications
wire rod Connector shield-processing
1 、2 H750v1/GDB-5F40 Twisted pair 5pair DSUB9(Socket)
H717A/GDB-5F40 Shielded cable0.2SQ
H717/GDB-5411A-00 plastic sheath
( m) H718/GD-5410 DSUB9(Pin)
H-584,AD-5610
● Motor / sensor cable(SPring-8 connection standards:W002)
Other specifications
Connection shield-processing Contact
①1axis plastic sheath ①Glass fiber filled 10、15、20 H750v1/GDB-5F40 RM**M*3KJ(SOURIAU)
PBT Resin 25,30、35 H717A/GDB-5F40 (Gold-plated pin)
②2 axes plastic sheath 40 H717/GDB-5411A-00
②Aluminum alloy H718/GD-5410 RC**M*3KJ(SOURIAU)
( m) H-584,AD-5610 (Gold plated socket)
● 1-axis ● 2-axes
● Motor / sensor cable(SPring-8 connection standards:W011)
Other specifications
shield-processing Contact
①1axis plastic sheath ①Glass fiber filled 10、15、20 H750v1/GDB-5F40 RM**M*3KJ(SOURIAU)
PBT Resin 25,30、35 H717A/GDB-5F40 (Gold-plated pin)
②2 axes plastic sheath 40 H717/GDB-5411A-00
②Aluminum alloy H718/GD-5410 RC**M*3KJ(SOURIAU)
( m) H-584,AD-5610 (Gold plated socket)
● 1-axis ● 2-axes
Line 1 shield arecrimp to the crimpterminal in thedriver side
one forone
Line 1 shield arecrimp to the crimpterminal in thedriver side
wire rodConnector Body Materialof the Driver side
Cable length(L)(m)
Application anduse models
Application anduse models
The connection tothe shell on bothsides
:Equivalent to 17JE-13090- 02(D1)A(DDK)
:Equivalent to 17JE-23090- 02(D1)(DDK)
ConnectionCable length(L)(m)
Application anduse models
② Reverse connection
wire rodConnector BodyMaterial
Cable length(L)(m)
① Normal connection
<Connection/other>●The length of the cable can choose the single-axis or two-axes.
●1axis
●2axes *Shield contact with each other
0.3SQ×3
0.75SQ×5
sheat
shield
Approx.φ9.5
*Shield contact with each other
0.3SQ×3
0.75SQ×5
sheat
shield
Approx.φ12.1
<Cable specification>
<Cable specification>
●1axis
●2axes
0.3SQ×5
0.75SQ×5
sheath
shield
Approx.φ11.3 0.3SQ×5
0.75SQ×5
sheathshield
Approx.φ13.2
Motor/Sensor Cable
Signal CableDriver Motor/SensorContorller
(Sensor signal)
<Cable specification>
Signal Cable
Driver Motor/SensorContorller
Motor/Sensor Cable
Motor/Sensor Cable
Signal Cable
Driver Motor/SensorContorller
*Shield contact with each other*Shield contact with each other
H751-23-01/BL-GE-SMTR-W002-350/D
566261EX2023
H751-23-01
EX2023566261
/BL-GE-SMTR-W002-350/D
L
500
180
500
4
Product Catalog【Research facilities and research institutions】Vol.5.2
Motion control for research facility and research institutions
● Dedicated shelf board for mounting the Melec Inc. driver and power supply in a 19-inch rack
●
This has become a safety design to prevent accidents caused by contact failure or dropout of the connector portion.
●
●
●This shelf board can be pulled out the rack rear direction in consideration of the wiring efficiency .
●This shelf board can be mounted with four screws on the front on the 19-inch rack .
●This shelf board can be installed in the space of 3U height of the EIA standard.
№ Product name Model name Applicable Remarks
① 3U shelf board drawer type(5unit) OP-08-04 H750v1/GDB-5F40 Dimensions:W482.6×H132.55(3U)×D410(D560 at pull-out))
H717A/GDB-5F40 Weight:6.4kg
H-539C
H-539D
3U shelf board drawer type(5unit)
●This shelf board can be mounted with four screws on the front on the 19-inch rack .
●This shelf board can be installed in the space of 4U height of the EIA standard.
№ Product name Model name Applicable Remarks
① 4U shelf board drawer type(6unit)OP-08-05 H717/GDB-5411A-00 Dimensions:W482.6×H177(4U)×D410
H718/GD-5410 Weight:5.0kg
H-584,AD-5610
H-539A
The BINDING WIRE hole is provided on the shelf board after the surface, you can reduce the cable loadapplied to the connector portion of the driver and the like.
Driver one unit, or designed in consideration of the maintenance that can be extracted to the driver shelfboard each front side
It is possible to pull out 150mm a shelf board in the rack back side. Design this is in consideration of thewiring efficiency .(3U shelf board drawer type)
<Connection/other>
It is possible to pull out 150mm a shelf board in the rack back side.Design This is in consideration of the wiring efficiency .
This is a picture of when it was pulled out of the shelf board in the rack rear direction.
Rack rear sideRack front side
5
Product Catalog【Research facilities and research institutions】Vol.5.2
Motion control for research facility and research institutions
● This is a motion control system of DeviceNet I / F.
● Equipped with the absolute address position management function
In the case of power ON, returning to the origin will be unnecessary.
● Connection mistake and assembling man-hours are reduced
by the standard cable.
This controller driver is adopted in SACLA and gets a high evaluation.
Axes 2-axes(Controller Diver)
DeviceNet(ONLINE) Command from the host
USB I/F(OFFLINE) Mechanical adjustment from the PC
pulse frequency 1Hz~1MHz
Number of pulses ±262,143,500(at absolute address)
Resolver signal input ±Sinθ,±Cosθ,R1,R2
Driver specification Drive voltageDC24V,5-phase driver Drive voltage Single-phase100V,5-phase driver
Applicable Motors 0.75~1.4A/phase
Resolving Ability 400,000P/R
1/Divisions 1,2,4,10,20,40,100,200,400,800
Dimensions H146 × W115 × D 200 (mm)/2.8Kg H200× W140× D 230 (mm)/4.6Kg
Supply Power AC100V/AC115V、50/60Hz/1.5A AC100V/AC115V、50/60Hz/7.5A
● cables forcontroller driver
Product name Applicable Model name Remarks
Motor/Sensor H734-00/GDB-5411A-00 H734-03/DSUB15P-40R 4m
cable H743-00/GD-5510E H734-05/DSUB15P-100R 10m
H734-04/DSUB9P-40R 4m
H734-06/DSUB9P-100R 10m
● The stepping motor dedicated of H734-00/GDB-5411A-00 and H743-00/GD-5510E
●Standard motor, you can choose from the geared motor with.
Standard Type
Dimensions
Lx□orφ(mm)
Geared Type
Dimensions
Lx□orφ(mm)
weight
A/相 Kg
HoldingTorque
RotorInertia
Basicstepangle
Permissible
Rotational
speed
g・cm2 rpm ゜
Model nameApplicable
Nm
53.5×24.5
H739-01/TS3678N1701 0.13 35 3600 0.72
H739-00/TS3678N900 36000.017 4.2
weight
約0.25 55.5×42
0.72 0.75
Reduction ratio
Basicstepangle
Ratedinputcurrent
0.75
約0.12
Backlash
Gear
maximum
rotational
speed
Nm kg・cm2 min
Allowable
torqueRotorInertia
A/相 Kg
1/50 0.430.0144
゜
0.751.2
x10-2
3.5
97.3×58
1 or less(0.017゚)
1 or less(0.017゚)
72
50 111.3×581/50 0.0144 0.75
191.5×1004.8
1.4 191.5×1004.8
0.53
1.4
1.25
x10-2
0.3
x10-4
1 or less(0.05゚)
160 1/15 0.04824
0.32
x10-4
1 or less(0.05゚)
220 1/11 0.06545
6H739-11/TS3678N1701
-CSF11-50
H739-14/TS3678N1705-CSF11-50
20
3.5
H739-13/TS3678N3401-HPG20-11
H739-12/TS3678N3401-HPG20-15
33
8.5
24
№
①
② Resolver cable
24square motor&Resolver
Model name
● by the combination of motor with resolver and driver with the absolute address position management function, it is the case of power ON, returning to the origin will be unnecessary.
Ratedinputcurrent
H734-00/GDB-5411A-0042square motor
&Resolver
Maximum
torque
Nm rpm
86square motor&Resolver&Harmonic
gear
42square motor&Resolver&Harmonic
gear
Applicable
H734-00/GDB-5411A-00
H743-00/GD-5510E
<DeviceNet I/F Motion Control>
(SACLA Facility)
<Connection/other>
Eco cable
Eco cable
●Left product is provided as a controller driver using the core of the GDB series and GD series.
<Motor>
<H734-00/GDB-5411A-00> <H743-00/GD-5510E>
2-axes 2-axes
DeviceNet
USB I/F
・Motor/Sensor /Resolver
H734-00/GDB-5411A-00H743-00/GD-5510ET branch
・Motor/Sensor cable・Resolver cable
1-axis
2-axes
AC100V
6
Product Catalog【Research facilities and research institutions】Vol.5.2
Other, information about products and services
● Rack cabinet for research facility and research institutions
● 810series option・ Side cover OP-01-01、OP-01-02 etc
・ Rear cover OP-02-01、OP-01-02 etc
・ Guide rail OP-03-01
・ Shelf board OP-04-01
・ Outlet unit OP-05-03、OP-05-04
・ Adjuster bolt OP-06-01
・ Clamp band OP-07-01
・ Shelf board for exclusive OP-08-04、OP-08-05
use of the driver
・ Eyebolt set OP-10-01
・ Fall prevention metal OP-11-01
fittings
・Equipment storage of radiation measuring device ・Network of research facilities
・Equipment storage of biological material analyzer ・Network in the theme park
・Equipment storage of light device certification inspection equipment ・For the data center etc.
etc.
The latest information on products and servicesis available from the MELEC-INC. website .
<Rack cabinet for the measuring equipment and information network >
700N1 series wide570mm 700NW1 series wide700mm
Rack cabinet for the measuring equipment Rack cabinet for the information network
<Rack cabinet for research facility and research institutions>
●19 inches of steel racks which planned extreme reinforcement
(there is prevention of fall metal fittings (option))
・ Laboratory equipment storing of the SACLA research facility・ Laboratory equipment storing of the SPring-8 research facility・ Laboratory equipment storing of the research institutions such as universities
melec Stepping Motor Driver
Merit of the maintenance nature whichcan be taken out to the front side.- One driver unit- Every driver shelf board
Cable of the driver connector part Bunch line example reducing load
・OP-08-04・OP-08-05
●Shelf board for exclusive use of the
810 series
・55-70-180E-B
・55-70-100E
・55-70-80E
・55-70-180E
・Steel rack・20% - 30% of reduction in cost(Our conventional ratio) ・Caster standard features (Four of tire move freely.There is a stopper) ・EIA standard
●Fall prevention metal fittings
55-70-180E Installation example
●55-70-180E-B
The example of mount rail retreat
Implementation
apparatus
The rack front
mount rail retreat
25mm( Normal)
・Rack cabinet for research facility and research institutions
Rack cabinet Product Catalog
URL:http://www.melec-inc.com
7
Product Catalog【Research facilities and research institutions】Vol.5.2
Other, information about products and services
● MCS (motion control system) using the various master is easily possible to construct (AL-Ⅱ series)
Motion control Product Catalog
URL:http://www.melec-inc.comThe latest information on products and servicesis available from the MELEC-INC. website .
<Motion control by a Personal computer. Other.>
●DC power input/AC power input driver for stepping motor.
●Controller IC for stepping motor and servo motor.
●PC based motion control and I/O control.
●PLC based motion control and I/O control.
●USB I/F MCS Configuration example(AL-Ⅱseries)
UNIT1USB I/F
Extend I/O Unit
(servo motor)
IN/OUT 32/32
UNIT2
(5-phase stepping motor)
Extend I/O Unit
UNIT3( UNIT15(MAX) )
master
Windows7
Device driver(32BIT/64BIT)
AL-Ⅱseres・The number of axes~60axes+IO 480/480point (This can change the axes and I/O points by a combination.)・Wiring distance~Approx 100m(100m or more consultation)
・Ethernet I/F・EtherCAT I/F・PCI BUS・PCI Express BUS
・Slave other than master is ready to be used as it is. For this reason, you can take advantage of the assets of your application program.
Examples of 4-axes control using the USB I/F master.(AL-Ⅱseries)
Mobile PC
USB I/F master
USB I/F
AL-Ⅱ high-speed communication(insulation) Total extension ~ 100m
・PCI BUS
・USB I/F
・PCI Express BUS
・Ethernet I/F
・Various software
・EtherCAT I/F
Slave:10-axes(4-axes controller+seavo、4-axes5-phase stepping moter controller driver+IN/OUT 32/32x2)
USB I/Fmaster
・The master has a lineup for USB I/F,Ethernet I/F,EtherCAT I/F,PCI BUS,and PCI Express BUS.
・Various master
・Device driver ・C language library ・Sample program
IN/OUT 32/32
・MCS:モーションコントロールシステム
8
Product Catalog【Research facilities and research institutions】Vol.5.2
Other, information about products and services
● Promotion of technology development through joint research.
● Proprietany products born in the customer's perspeetive
URL:http://www.melec-inc.com
<Development of the core device>
It can be stopped motor shaft at a "one-400,000th" .Melec Inc. has succeeded in the development of high-precisiontechnology of 0.0009 degrees. And,it was commercialized as GD series.
Currently it offers a GDB series loaded with "one-2,000,000th".Related patents also owns a dozen.
”This is the world that we are working ”
0.00018゚/STEP
(1/2,000,000)
5-phase stepping motor
control command of"one-2,000,000th "
GDB-5F30v1
University Melec inc User
Electrical machinery,Electronics-related
Medical institutions related
Academic research related
Other(Bio/Light equipment/Other)
Jointresearch
Offer
Achievement
Planning
productization
Based on the medium- and long-term themes, it is elements development, applied technology development,and development of the core device, and we are working for the future.Already planning on the basis of the digital technology obtained here, the product of the digital driver,has spread to the adoption of the new applications.
We always aim to develop productsthan meet the previous the requset.The controller IC it has been handeddown to the beginning MCC03,MCC05,MCC07/MCCC08 and MCC09from MCC01.
Core devices of high evaluation,offers the USER as each series products.
1998 2005 2008 2011
Controller IC
MCC05 MCC05V2
MCC06
MCC07
MCC08
MCC09
SACLA/SPring-8(Offer:National Research andDevelopment Agency RIKEN)
SPring-8SACLA
2013
It is adopted in research organization of the National Researchand Development Agency,SPring-8 and SACLA and gets a high evaluation.
Now, it rises to "one-2,000,000th "
●Technology of a "one-400,000th " approved from the research organization of the National Research and Development Agency.
9
Product Catalog【Research facilities and research institutions】Vol.5.2
Other, information about products and services
SACLA/SPring-8(Offer:National Research and Development Agency RIKEN)
SACLA facilities(Offer:National Research andDevelopment Agency RIKEN)
The undulators.
●SACLA
・H734-00/GDB-5411A-00・H743-00/GD-5510E
Stepping Motorcontroller driver(melec)
The injector outskirts from the accelerationpipe side.
SACLA facilities(Offer:National Research andDevelopment Agency RIKEN)
The acceleration pipe (L band) outskirts thataccelerate an electron.
・H734-00/GDB-5411A-00Stepping Motorcontroller driver(melec)
The acceleration pipe outskirts.SACLA facilities
・H734-00/GDB-5411A-00Stepping Motorcontroller driver(melec)
light source ridge :Front end
SACLA facilities(Offer:National Research andDevelopment Agency RIKEN)
Experiment study ridge :The optics hatch inside
SACLA facilities(Offer:National Research andDevelopment Agency RIKEN)
SPring-8SACLA
<Our product is adopted to SACLA and SPring-8>
SACLA facilities(Offer:National Research andDevelopment Agency RIKEN)
10
Product Catalog【Research facilities and research institutions】Vol.5.2
Other, information about products and services
SAGA-LS (Offer:Public Interest Incorporated FoundationKyushu synchrotron Light Research Center)
Kyushu synchrotron Light Research Center The Spectroscope and control system of BL10
・H717/GDB-5411A-00・H718/GD-5410・H-584,AD-5610・H-539A
Stepping Motor Driver(melec)
●Control example in SACLA
※19 inches rack cabinets(melec)
・H717-01/GDB-5411A-00・H-539A
Stepping Motor Driver(melec)
<Our product is adopted to Kyushu synchrotron Light Research Center >
●Control example in SPring-8
・H750v1/GDB-5F40・H-539B
Stepping Motor Driver(melec)
(Protein crystal structure analysis beam line)(Kyoto University RISING BL-28XU Beamline -Advanced Basic Science for Battery Innovation)
・H717/GDB-5411A-00・H-539A
Stepping Motor Driver(melec)
SAGA-LS (Offer:Public Interest Incorporated FoundationKyushu synchrotron Light Research Center)
※ ・19 inches rack cabinets (melec) ・Shelf board for exclusive use (melec)
<Our product is adopted to SACLA and SPring-8>
11
Product Catalog【Research facilities and research institutions】Vol.5.2
Other, information about products and services
Technical Service
Headquarters system support
E-mail [email protected]
TEL.(042)664-5382 FAX.(042)666-5664
Sales and Service
/TEL.(042)664-5384 FAX.(042)666-2031
516-10,Higashiasakawa-cho,Hachioji-shi,Tokyo 193-0834,Japan
Kyoto office /TEL.(075)959-6888 FAX.(075)959-6889
3-4-34,kaiden,Nagaokakyo-shi,kyoto 617-0826,Japan
Inquiries about rack cabinet
/TEL(042)665-5115 FAX.(042)666-5945
516-10,Higashiasakawa-cho,Hachioji-shi,Tokyo 193-0834,Japan
516-10,Higashiasakawa-cho,Hachioji-shi,Tokyo 193-0834,Japan
URL:http://www.melec-inc.com
This Operating Manual is subject to change without prior notice 711PR0876-4 c1605
for the purpose of product improvement.
Control equipmentsales department
System equipment
ABCDEFISO14001Certification(head office)
<Our product is adopted to DXAFS (time-resolved) in SR center of Ritsumeikan University >
(Offer:: Ritsumeikan University,Academy of Engineering Sciences ,College of Life Sciences.)
DXAFS (time-resolved)(Dispersion (= wavelength dispersive)XAFS(DXAFS)
UVSOR facility(Offer:Inter-University Research InstituteCorporation National Institutes of Natural Sciences.Institute for Molecular Science)
UVSOR facility
<Our product is adopted to UVSOR Facility >
abcdefISO9001Certification(Control equipment)
UVSOR facility(Offer:Inter-University Research InstituteCorporation National Institutes of Natural Sciences.Institute for Molecular Science)
UVSOR facility