reservoirsummation installation guide

8/10/2019 ReservoirSummation Installation Guide

1/14

1 2013 Schlumberger. All rights reserved.

RESERVOIR SUMMATION PLUG-INFOR PETREL 2011 AND PETREL 2012

INSTALLATION GUIDE

SCHLUMBERGER INFORMATION SOLUTIONS


2/14



3/14


Copyright 2013 Schlumberger. All rights reserved.

This work contains the confidential and proprietary trade secrets of Schlumberger and may not becopied or stored in an information retrieval system, transferred, used, distributed, translated orretransmitted in any form or by any means, electronic or mechanical, in whole or in part, without theexpress written permission of the copyright owner.

Trademarks & Service Marks

Schlumberger, the Schlumberger logotype, and other words or symbols used to identify the productsand services described herein are either trademarks, trade names or service marks of Schlumberger andits licensors, or are the property of their respective owners. These marks may not be copied, imitated orused, in whole or in part, without the express prior written permission of Schlumberger. In addition,covers, page headers, custom graphics, icons, and other design elements may be service marks,trademarks, and/or trade dress of Schlumberger, and may not be copied, imitated, or used, in whole orin part, without the express prior written permission of Schlumberger. Other company, product, andservice names are the properties of their respective owners.

An asterisk (*) is used throughout this document to designate a mark of Schlumberger.


4/14


TABLE OF CONTENTS

1. INTRODUCTION ..................................................................................................................................... 5

2. Hardware Requirements ....................................................................................................................... 5

3. SOFTWARE REQUIREMENTS ................................................................................................................. 5

4. INSTALLING RESERVOIR SUMMATION FOR PETREL 2011.1 .................................................................. 5

5. CHECKING THE INSTALLATION ............................................................................................................ 10

6. UNINSTALLING RESERVOIR SUMMATION FOR PETREL 2011.1 .......................................................... 13


5/14


1. INTRODUCTION

Plug-in Name : Reservoir summation Vendor Name : Schlumberger Information Solutions

Origin of Country : India License Feature Name : OCEAN_SLB_RESUM_TOOLBOX Support Information : [email protected] Public Key token : "02e0da9c1c04de5f"

2. Hardware Requirements

The hardware prerequisites for installing Reservoir summation are same as required for Petrel2011.1/Petrel2011.2/Petrel2012.1 64-bit.

3. SOFTWARE REQUIREMENTS

The software prerequisites for installing Reservoir summation are:

A 64-bit target machine with an appropriate 64-bit operating system. Petrel 2011.1/Petrel 2011.2/Petrel2012.1 64-bit installation. Schlumberger Licensing utility installation. .Net Framework 3.5 for Petrel 2011.1/Petrel 2011.2 .Net Framework 4.0 for Petrel 2012.1 Required Petrel license features list (a minimum Petrel Core license is required: G-Core).

4. INSTALLING RESERVOIR SUMMATION FOR PETREL 2011.1

Following process describes the procedure for installing Reservoir summation for Petrel 2011.1. On atarget PC, that meets the prerequisites, the installation process can start at step 4.3; otherwise steps 4.1& 4.2 must be completed before the plug-in is be installed. The steps to install the plug-in are the samefor Petrel 2011.2 and Petrel 2012.1.

4.1 Install the Petrel 2011.1 64-bit application. Petrel 64-bit application is supported onMicrosoft Windows XP Professional (64-bit) and Windows Vista.
mailto:[email protected]:[email protected]:[email protected]:[email protected]


6/14


Business/Enterprise/Ultimate (64-bit). Petrel 2011.1 64 bit is also supported onMicrosoft Windows 7 (64 bit).4.2 Install the Schlumberger Licensing utility.4.3 Once you have installed Petrel and Schlumberger Licensing utility, Run Petrel 2011.1 and

open Ocean Plug-in Manager from Help menu.

Screen 1: Open Ocean Plug-in Manager

4.4 In Ocean Plug-in Manager dialog you can see the current plug-ins installed.


7/14


Screen 2: Ocean Plug-in Manager Window

4.5 Click the Install Plug -in button and browse the directory where Reservoir summationinstaller is located. Select the Reservoir summation pip file and click on Open button.


8/14


Screen 3: Browse to Pip File

4.6 Installation window appears with a progress bar, click on Close button wheninstallation finished.


9/14


Screen 4: Installation window with progress bar.

4.7 Reservoir summation appears in the list of current plug-ins installed.

Screen 5: Ocean Plug-in manager window with installed plug-ins.

4.8 Reservoir summation plug-in has been installed in the plug in default directory andPetrel need to be restarted. Restart Petrel 2011 to check if Reservoir summation plug-in hasbeen successfully installed.


10/14


5. CHECKING THE INSTALLATION

Following process describes the procedure for checking that Reservoir summation for Petrel 2011 hasbeen successfully installed.

5.1 Check that the plug-in files have been correctly installed in the folder specified below.Open a file browser and navigate to the location specified during installation.The default location for plug-in files will be,C:\ProgramFiles\Schlumberger\Petrel2011\Extensions\Reservoir summation _1.0.0.0

although this may be different on your PC. Check that this folder exists and that itscontents are as follows:

Screen 6: Reservoir summation folder.

The installation will add a folder in the plug-in deployment folder called Reservoir summation_1.0.0.0.

5.2 Start Petrel 2011. The 'select license package' dialog appears during start-up. An itemnamed Reservoir summation should appear under the Ocean plug-ins node. Check

the item labeled Reservoir summation and click OK.


11/14


Screen 7: License Package Dialog.


12/14


5.3 When Petrel has started, go to the Processes tab and expand Plug-ins tree. Reservoirsummation should appear as shown in Screen below,

Screen 8: Reservoir summation under Processes tab.

5.4 Double click on Reservoir summation and confirm that the associated dialog appearsas follows:


13/14


Screen 9: Reservoir summation Dialog Box

6. UNINSTALLING RESERVOIR SUMMATION FOR PETREL 2011.1

Following process describes the procedure for uninstalling Reservoir summation for Petrel 2011.

6.1 Run the Ocean plug-in manager from the Help menu.

6.2 Select Reservoir summation

6.3 Click Uninstall.


14/14


Screen 8: Uninstalling Reservoir summation6.4 Restart Petrel

Note: The uninstaller will only remove the Petrel plug-in and the installed files in C:\ProgramFiles\Schlumberger\Petrel 2011\Extensions\Reservoir summation_1.0.0.0 in the Petrel 2011installation folder after restarting Petrel.

reservoirsummation installation guide

Documents