R i b + B r i s k e t Cu t t i n g S o l u t i o n

R I B & B R I S K E T S AWS t . Lo u i s S t y l e R i b s

Patent Pending

St. Louis Style Ribs and Briskets.Safer and Easier.Cut St. Louis Style Ribs and Briskets in a Fraction of the Time!

Rib and Brisket Saw Benefits:• Adjustable 4”-6” rib cuts

• Cuts through cartilage & hard bone

• More consistent cut

• Safer than cutting by hand

• Increases product output

• Reduces operating expenses

• Integrates into current operation

TECHNICAL SPECIFICATIONS

Our innovative and uniquely designed Rib and Brisket Saw is a high capacity rib saw

designed to cut St. Louis Style ribs and briskets. Engineered to cut through cartilage

and hard bone without the use of a knife, the Rib and Brisket Saw is the safe,

ergonomic, and cost-effective solution for your rib and brisket processing.

An adjustable rib guide attached to the main feed belt conveyor allows for 4” - 6”

cuts and can be adjusted easily by the operator. Dual cutting lanes with laser light

guides give you greater output and more consistent cuts than cutting by hand or

band saw. Hold down belts keep ribs in place during the cutting process.

Safety is key in the meat processing industry. The Rib and Brisket Saw boasts a safety

stop bar to kill power to the machine, safety guarding with latch locks to prevent the

machine from starting if guarding is not correctly secured, and two emergency stop

buttons on the machine and one on the control panel.

Get ahead of the competition, save time, and increase output of St. Louis Style

Ribs and Briskets with the Rib and Brisket Saw!

FEATURE SPECIFICATION

Machine Dimensions

Height 80.21”

Width 74.59”

Length 97.36”

Electrical Requirements

230/460 VAC; 60Hz

2.9 Amps/1.5 Amps

To Control Box 480 VAC; 30 Amps*

Motors

Conveyor Motors Drive Shaft 1 HP

Saw Motors Drive Shaft 2 HP

36.00

4.00

46.25 74.59

97.36

45.75

1.96GAP TYP.

28.25

80.21

24.95

1.00GAP

.64GAP TYP.

1

SECTION B-B

1615

3840 40 4040

.50GAP TYP.

.25GAP TYP.

.25TYP.

.25TYP.

.41GAP TYP.

DETAIL 1SCALE 1 : 3

9

27

28

39

47

10

10

454843

52

11

30.75TYP.

9.29TYP.

35TYP.

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

COMPANY NAME

NAME

PROJECT TITLE

SCALE

REV NO.

DRAWN BY

1:10 0

TOLERANCE UNLESS OTHERWISE SPECIFIED:

REFERENCE NO.

218 20th Ave.Roseville, IL 61473

PHONE: (309) 774-4275FAX: (309) 774-4161

Thursday, March 9, 2017 8:42:03 AM, P:\Quotes and Jobs\011772 - ST. LOUIS RIB SAW\DRAFTING\SOLIDWORKS\A-12897, RIB SAW P:\Quotes and Jobs\011772 - ST. LOUIS RIB SAW\DRAFTING\SOLIDWORKS\

3366.39 LBS

FABRICATEDTHICKNESS

MATERIAL

--

CONFIDENTIALThis drawing contains

confidential and proprietary information of Fusion Tech

Integrated, Inc. and cannot be used, duplicated or disclosed, in whole or in part, except with

the expressed written permission of Fusion Tech

Integrated, Inc.

UNLESS OTHERWISE NOTED ALLDIMENSIONS ARE IN INCHES

ESTIMATOR

JWS

A-12897

RIB SAW

A-12897RIB SAW

NET WEIGHT

3/9/2017

D

APPROVALS DATE

.X .06.XX .03

.XXX .015

ANGLE 1 FRACTION 1/32"HOLE DIA. .01

Interpret Drawing per ANSI Y.14.5

DETAILED BY JWS 3/9/2017

UNLESS OTHERWISE SPECIFIED DEBUR AND BREAK ALL SHARP CORNERS.1.UNLESS OTHERWISE SPECIFIED ETCH ALL UP BENDS.2.UNLESS OTHERWISE SPECIFIED CONTINUOUS WELDS ON ALL SEAMS.3.ALL WELDS TO BE SMOOTH & FREE OF CRACKS AND PITS.4.

36.00

4.00

46.25 74.59

97.36

45.75

1.96GAP TYP.

28.25

80.21

24.95

1.00GAP

.64GAP TYP.

1

SECTION B-B

1615

3840 40 4040

.50GAP TYP.

.25GAP TYP.

.25TYP.

.25TYP.

.41GAP TYP.

DETAIL 1SCALE 1 : 3

9

27

28

39

47

10

10

454843

52

11

30.75TYP.

9.29TYP.

35TYP.

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

COMPANY NAME

NAME

PROJECT TITLE

SCALE

REV NO.

DRAWN BY

1:10 0

TOLERANCE UNLESS OTHERWISE SPECIFIED:

REFERENCE NO.

218 20th Ave.Roseville, IL 61473

PHONE: (309) 774-4275FAX: (309) 774-4161

Thursday, March 9, 2017 8:42:03 AM, P:\Quotes and Jobs\011772 - ST. LOUIS RIB SAW\DRAFTING\SOLIDWORKS\A-12897, RIB SAW P:\Quotes and Jobs\011772 - ST. LOUIS RIB SAW\DRAFTING\SOLIDWORKS\

3366.39 LBS

FABRICATEDTHICKNESS

MATERIAL

--

CONFIDENTIALThis drawing contains

confidential and proprietary information of Fusion Tech

Integrated, Inc. and cannot be used, duplicated or disclosed, in whole or in part, except with

the expressed written permission of Fusion Tech

Integrated, Inc.

UNLESS OTHERWISE NOTED ALLDIMENSIONS ARE IN INCHES

ESTIMATOR

JWS

A-12897

RIB SAW

A-12897RIB SAW

NET WEIGHT

3/9/2017

D

APPROVALS DATE

.X .06.XX .03

.XXX .015

ANGLE 1 FRACTION 1/32"HOLE DIA. .01

Interpret Drawing per ANSI Y.14.5

DETAILED BY JWS 3/9/2017

UNLESS OTHERWISE SPECIFIED DEBUR AND BREAK ALL SHARP CORNERS.1.UNLESS OTHERWISE SPECIFIED ETCH ALL UP BENDS.2.UNLESS OTHERWISE SPECIFIED CONTINUOUS WELDS ON ALL SEAMS.3.ALL WELDS TO BE SMOOTH & FREE OF CRACKS AND PITS.4.

SEE PICTURES & VIDEO AT FTIINC.ORG/RIBSAW

*Customer responsible to wire from control box to Rib and Brisket Saw components.

Rib Hold Down BeltAdjustable hold down belts stay in contact

with the rib so it does not slip during cutting.

18” serrated, single bevel blade with removable

guarding and top port to wash abscess.

Rib Saws

Easily adjusts to allow 4” to 6” wide cuts.

Adjustable Rib Guide

Stops the machine when touched.

Safety Stop Bar Machine will not operate unless guarding (not

shown for detail) is correctly locked.

Safety Lockout Latch

The Rib and Brisket Saw is equipped with safety guarding sur-

rounding the cutting area to keep employees from injury. Safety

lockout latches prevent the machine from running if guarding is

not correctly closed and secure.

Safety Guarding

Shown without guarding for detail.

Specially open-design conveyor frame is easy

to clean.

Open Conveyor Frame

ILLINOISMain Facility218 20th AveRoseville, IL 61473Phone: 309.588.4803

SOUTH DAKOTADrafting Office600 Stevens Port Dr., Ste 112Dakota Dunes, SD 57049

CUSTOM SOLUTIONS FOR THEFOOD PROCESSING INDUSTRYFTIINC.ORG

© 2018 Fusion Tech Integrated, Inc.