ro emergency oom specification -...
TRANSCRIPT
RO-Emergency Boom dirancang dalam
berbagai ukuran, pendiployan yang cepat
dapat dari winder atau rak.
RO-Emergency Boom diproduksi dengan
menambahkan tali baja sebagai penahan
tegangan yang dikombinasikan dengan bagi-
an pleampung.
Dapat menahan smpah dan minyaki biasanya
penempatan pada pelabuhan.
Konstruksi penahan tegangangan pada bagi-
an atas boom menggunakan tali baja stainless
steill dan bagian bawah mrngunakan rantai
sebgai pemberat dan berfungsi sebagai
penahan tegangan.
Model RO-E-15 in RO-E - 25 in RO-E - 30 in RO-E - 36 in RO-E - 42 in RO-E - 44 in
Height 430 mm 635 mm 760 mm 910 mm 1,060 mm 1,100 mm
Freeboard 150 mm 200 mm 250 mm 280 mm 380 mm 400 mm
Draft 280 mm 430 mm 510 mm 635 mm 680 mm 27.5 in / 700
mm
Top Tension 5 mm Galv 6 mm sus 316 6 mm sus 316 6 mm sus 316 8 mm sus 316 8 mm sus 316
Bottom Tension 3/16 in / 5 mm
Galv. Chain
3/8 in / 10 mm
Galv. Chain
3/8 in / 10
mm Galv.
Chain
3/8 in / 10
mm Galv.
Chain
1/2 in / 12
mm Galv.
Chain
1/2 in / 12 mm
Galv. Chain
Weight 1.8 kg/m 3.3 kg/m 3.9 kg/m 4.2 kg/m 7.5 kg/m 7.5 kg/m
Breaking
Strength 2,909 kg 2,909 kg 2,909 kg 5,669 kg 7,500 kg 7,500 kg
RO Emergency Boom Specification
Pelampung bagian dalam menggunakan busa sel tertutup sehingga tidak memungkinkan
air masuk ke ruang pelampung. Pelapis bagian luar menggunakan bahan PVC dan di press
menggunakan mesin press high frekwensi, oil boom ini dilengkapi dengan pegangan dan
anchor points.
Oil Boom MaxiMax standar length 50 kaki / 15 m atau 100 kaki 30 m. MiniMax juga terse-
dia dalam bagian 25 kaki / 7.5 m. Ukuran khusus tersedia berdasarkan permintaan.
Accessories: Anchor Sets, Tidal Slides, Tow Bridle, Marker Lights, Boom Stand Off Units, Re-
pair Kit, Alternative Connectors, Rack, Magnetic Connector
RO-Emergency Boom
The RO Inflatable Boom is designed for harbour, bay, and any protected water locations.
Its operation is very practical and suitable for emergency and semi-permanent deploy-
ment either from storage area or from the RO Inflatable Boom Reel. Its draft and free-
board length will ensure that no oil passes through the Inflatable Boom. The OSPICO Inflat-
able Boom is classified into 5 types: Harbor, Nersshore, Offshore, Open Water and Deep
Model Harbor Nearshore Offshore Open Water Deep Sea
Connector Height 0.61 m 0.96 m 1.27 m 1.44 m 1.9 m
Operation Height 0.56 m 0.81 m 1.1 m 1.22 m 1.63 m
Freeboard 0.2 m 0.35 m 0.46 m 0.51 m 0.61 m
Draft 0.35 m 0.46 m 0.64 m 0.71 m 1.01 m
Section Length 30 m (other on
request) 30 m (other on
request) 30 m (other on
request) 30 m (other on
request) 30 m (other on
request)
Bottom Tensions 8 mm Galv.
Chain 9.5 mm Galv.
Chain 12.7 mm Galv.
Chain 12.7 mm Galv.
Chain 12.7 mm Galv.
Chain
Weight 2.75 kg/m 4.1 kg/m 4.1 kg/m 6.6 kg/m 7.3 kg/m
RO-Inflatable Boom Specification
RO-Inflatable Boom
RO Oil Inflatable Boom Reel is used for the storage and deployment of the RO Inflatable
Boom series. The reels are available in various sizes to accommodate the whole inflatable
boom series. Standard reels are hydraulic driven with forklift pockets and lifting eyes for
convenient positioning on docks, vessels, trailers, or at the spill site.
TECHNICAL DATA
Length ( cm ) 200 Hydraulic Motor High Torque, Low Speed
Width ( cm ) 270 Rational Speed Variable speed 0-20 rpm
Height ( cm ) 200 Max total flow hydraulic & Pressure 60 lpm Range Pressure 200 bar
Net Weight ( Kgs ) 1200 Hydraulic Motor speed 0-600 rpm 28 daNm
Hydraulic Supply
7 US gpm @ 2500 psi max Emergency Operation
A bypass valve in the hydraulic circuit allow reel to be rotated
without hydraulic power 26.5 l/min @ 17240 Kpa max
Frame 4 inch x 4 inch x t 0.25 inch wall carbon steel box section tube fully welded to A frame Lifting eye located at top Base frame
Finish Painting Shot blasted steel work 2 coats epoxy primer and 2 coats top coat orange
RO-Reel Boom