s690ql
TRANSCRIPT
-
7/25/2019 S690QL
1/4
www.ims-uk.com
S690QLS690QL IS A HIGH STRENGTH QUENCHED
AND TEMPERED STRUCTURAL STEEL,WITH EXCELLENT FORMING AND
WELDING PROPERTIES
-
7/25/2019 S690QL
2/4
www.ims-uk.com
ApplicationsS690QL steel plates are used in weight saving, high stress applications. With excellent weldability and ease of
fabrication this material is ideal for crane booms, mining and earthmoving equipment, bridges, material handling,trailers and agricultural equipment.
Chemical Composition
Typical Chemical Analysis - % maximum
C Mn Si P S Cr Cu Mo Ni B V
0.20 1.70 0.80 0.20 0.010 1.50 0.50 0.70 2.00 0.0050 0.12
CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Cu + Ni)/15
Typical Mechanical Characteristics
S690QL Tensile Minimum Minimum Impact tests
strength Yield strength elongation @ -40C
L T
Measuring Unit N/mm2 N/mm2 % J
Min 770 690 14 30 27
Max 940 - - -
Processing
Profiling
S690QL can be easily profiled using conventional methods of oxy-gas and plasma flame cutting.Some thicknesses may require pre-heating for more details please contact our sales office.
Forming
Cold Forming
S690QL can be readily cold formed. Flame cut edges in the bending area should be ground before cold forming
see recommended radii below.
Minimum recommended inside bending radius
Axis of bend in transverse direction Axis of bend in longitudinal direction
3.0t 4.0t
S690QL690 N/MM2 HIGH YIELD, HIGH STRENGTH PLATE
S690QL is a high strength quenched and tempered structural steel, with excellent
forming and welding properties.
-
7/25/2019 S690QL
3/4
CAD / CAM Profiling
Plasma Profiling
Laser Profiling
Oxy gas Profiling
DXF Compatible
Perforating
Forming
Drilling andCountersinking
Bevelling
Welded Fabrications
Processing Facilities
Hot Forming
Hot forming is not recommended as this will alter the original quenched and tempered condition and re-quenching
and tempering will not guarantee the original properties. Should you have any questions, please contact thesales office.
Welding
Due to S690QLs high yield strength, care should be taken during welding in order to avoid hydrogen cracking.
For further information regarding welding, preheating and consumables please contact the sales office.
Thickness Range
3mm to 120mm thickness
Note: IMS UK and its suppliers undertake continual material development and the data is a general guide, accurate
at the time of printing. Buyers and users should satisfy themselves as to the suitability of the selected steel for their
particular application.
-
7/25/2019 S690QL
4/4
Arley Road, Saltley, Birmingham, West Midlands, B8 1BB
Telephone: 0121 326 3100 Facsimile: 0121 326 3105 Email: [email protected]
S690QL
Part of the IMS Group, with sales officesestablished in over 14 European countries,IMS UK is a major distributor and processor of
Abrasion Resistant and High Yield Steel platethroughout the UK and Ireland.
A = Possible P = Plasma
B = Possible with some difficult y W = Wat er jet
C = Difficult L = Laser
X = Not possible* G = Gas
*Consult our technical sales for recommended methods of fixing.
Spec Operating Cold Hot Welding Drilling Profiling Wearlife x ImpactTemp forming forming Mild Steel strength
Abro 400 200C Max B X A B GPWL 3 to 4 High
Abro 500 200C Max C X B C GPWL 6 to 8 High
Creusabro 350C B A A B GPWL 3 to 5 High4800 Continuous
400C
Intermittent
Creusabro 300C C A B C GPWL 8 to 10 High8000 Continuous
350CIntermittent
Abro M Ambient B B B C to X PWL 20 to 30 Very highonly
Duretal 450C35 Continuous A X A X PWL 20 to 30 Moderate
600C to highIntermittent
S690QL Ambient A X A A GPWL 1.5 to 2 Very high
IMS have an extensive stock of 3mm - 120mm plate, including
their branded ABRO range of abrasion resistant grades, and offer
full technical and material selection advice and support to provide
cost effective solutions for complex applications.
The abrasion resistant stock range comprises standard 400 and
500 brinell grades, 11-14% manganese, as well as the more
specialised Creusabro 4800 and Creusabro 8000 materials.
Weld overlay Duretal 35 offers even higher performance in certain
applications. For high strength and weight saving applications
S690QL is also available.
With over 100 years of specialist knowledge within the steelindustry, the company offers in-house manufacturing facilities,
to provide profiled, formed and drilled parts and welded
fabrications, supported by a CAD/CAM design service ensuring
precision manufactured components.