This document is a general product description and is subject to change without notice

SATA

7 Pin

Silicon Power Computer & Communications Inc.

TEL: 886-2 8797-8833 FAX: 886-2 8751

114 106

7F, No.106, ZHO-Z ST. NEIHU DIST, 114, TAIPEI, TAIWAN, R.O.C.

This document is a general product description and is subject to change without notice

SATA IFM-I20 Module

7 Pin Vertical Series

DATA SHEET

Silicon Power Computer & Communications Inc.

2 8751-6595

7

Z ST. NEIHU DIST, 114, TAIPEI, TAIWAN, R.O.C.

*041940003102TB

Product Datasheet

041940003102TB*

SPXXXXBSFXDFOV11XX

Product Datasheet

Rev. 1.2 ii Oct. 2014

Table of Contents

1. Product Description .................................................................................................................. 1

1.1 Overview ........................................................................................................................................ 1

1.2 Features ......................................................................................................................................... 1

1.3 System Requirements .................................................................................................................... 2

2. Specification ............................................................................................................................. 3

2.1 Physical Dimension ........................................................................................................................ 3

2.2 Electrical Specifications ................................................................................................................. 4

2.3 Performance .................................................................................................................................. 5

2.4 Environmental Conditions ............................................................................................................. 5

2.5 Reliability ....................................................................................................................................... 6

2.6 Compliance Specifications ............................................................................................................. 6

3. Functional Description .............................................................................................................. 7

3.1 Architecture ................................................................................................................................... 7

3.2 Signal Assignment .......................................................................................................................... 7

3.3 Support ATA Commands ................................................................................................................ 8

3.4 Device Identification .................................................................................................................... 10

3.5 Set Feature Command ................................................................................................................. 17

3.6 SMART Feature Command........................................................................................................... 18

3.7 Write Protect Function ................................................................................................................ 20

4. Installation ............................................................................................................................. 21

4.1 Installation ................................................................................................................................... 21

4.2 Partition ....................................................................................................................................... 21

4.3 Format .......................................................................................................................................... 22

5. Troubleshooting ..................................................................................................................... 23

5.1 BIOS can not identify SATA IFM MODULE ................................................................................... 23

5.2 SATA IFM MODULE can not boot the system .............................................................................. 23

6. Ordering Information.............................................................................................................. 24

6.1 Part Number Definition ............................................................................................................... 24

6.2 Contact Information .................................................................................................................... 25

SPXXXXBSFXDFOV11XX

Product Datasheet

Rev. 1.2 iii Oct. 2014

List of Figures

Figure 1: 7 Pin SATA IFM-I20 Module Dimensions ........................................................................ 3

Figure 2: 7 Pin SATA IFM-I20 Module Block Diagram .................................................................... 7

Figure 3: SATA Signal Connector .................................................................................................... 7

Figure 4: Write Protect Jumper Setting ....................................................................................... 20

SPXXXXBSFXDFOV11XX

Product Datasheet

Rev. 1.2 iv Oct. 2014

List of Table

Table 1: 7 Pin SATA IFM-I20 Module Physical Dimension ............................................................ 3

Table 2: Flash Module Capacity, Cylinder, Head, Sector, and LBA ............................................... 4

Table 3: Serial ATA connector pin definitions .............................................................................. 7

Table 4: ATA Command Set .......................................................................................................... 8

Table 5: Identify Device Information .......................................................................................... 10

Table 6: SET FEATURES Feature field definitions ........................................................................ 17

Table 7: SATA Features ............................................................................................................... 17

Table 8: SMART Feature registers values ................................................................................... 18

Table 9: Device SMART Data Structure....................................................................................... 18

Table 10: Standard 7 Pin SATA IFM-I20 Module Ordering Information ....................................... 24

SPXXXXBSFXDFOV11XX

Product Datasheet

Rev. 1.2 v Oct. 2014

Revision History

Revision Date Major Changes 1.2 2014/10/28 1. Refine contents for Windows 7 setup procedures in Character 4.

Installation.

1.1 2014/09/03 1. Consolidate MLC solution into this document. Append the MLC

information into related sections.

2. Add connector functions and Power Connector polarity in Figure 1: 7

Pin SATA IFM-I20 Module Dimensions.

3. Change the MTTF to MTBF and update the data to MTBF data in

section 2.5.2.

Copyright Information

Copyright 2013, Silicon Power Computer & Communications Inc. All rights reserved.

The information and specifications provided in this document should be used for comparative analysis and reference purposes. The content of this document is subject to change without prior notice.

SPXXXXBSFXDFOV11XX

Product Datasheet

Rev. 1.2 1/25 Oct. 2014

1. Product Description

1.1 Overview

Silicon Powers 7 Pin SATA IFM-I20 Series is the storage device based on NAND flash memory

technology. This product complies with Serial ATA standard interface and is suitable for data storage

media, code storage device, or boot disk for embedded systems. In case of heavy write operating

applications, this series provide SLC solutions to sustain the requirements. If the applications are with

less write but high performance read operating, this series also provides Toggle MLC solutions to

support the requirements. By using solid state NAND Flashes, it operates good performance/power

consumption and can have better environmental sustention for the systems.

With smallest dimension, it can be installed into the compact system easily with minimum

mechanical confliction. In addition, with standard SATA interface, the applicable appliance can add or

install this SATA storage device into complete set of industrial PCs or rugged systems.

Application Fields:

- Industrial PC and Thin Client

- Game and Telecommunication Machine

- Ticketing, Examining, testing machine

- Equipments or Machines for Health, Production, or Rugged applications

- Other machines and Equipments with Serial ATA 3.0Gb/s Interface.

1.2 Features

- Smallest dimension to fit 1U frame case with Serial ATA Standard Interface connector.

- Compliant with Serial ATA Revision 2.6 Standard with 3.0 Gb/s or 1.5 Gb/s transfer rate.

- Compliant with ATA/ATAPI-8 Standard command protocol.

- Support SMART feature command set.

- Support 28/48 bit LBA ad