seminar klaesb - hart multiplexer
TRANSCRIPT
© 2015 Eaton, All Rights Reserved.
Hart Multiplexer
Kim Lim – Application & Technical Support Manager (MTL)
Muhammad Syafiq bin Hamid – Product Sales / Application Engineer
KL Automation Engineering Sdn Bhd
Email: [email protected]
2© 2015 Eaton, All Rights Reserved.
HART Basics
2
Digital FSK allows additional information
to be carried on the same pair of wires
with the 4-20 mA Analogue Signal
Simultaneously and Transparently
4-20 mA
3© 2015 Eaton, All Rights Reserved.
Getting HART into Plant Systems
3
• Some control systems offer direct HART interface and support use of HART data through-out
• For I/O systems that are not HART enabled a third party product support is required
• Gateways - HART to Ethernet, HART to Modbus, HART to Profibus, more...
• Single Device Interfaces - Transform digital process variables and status alerts into 4-20mA signals and/or contact closures
• Multiplexers - Some integral with FTA
I/OI/O
HMIHMI
EngineeringEngineering
MaintenanceMaintenance
HART
DATA ControllerController
4© 2015 Eaton, All Rights Reserved.
HART multiplexer system illustrated
or
5© 2015 Eaton, All Rights Reserved.
Open Connectivity
5
Yokogawa PRM PRM Supported
Siemens PDM Supported
PactWare Consortium PACTWARE Supported
Metso Automation Valve Manager Supported
Metso Automation FieldCare Supported
Masoneilan ValveVue SVI Supported
Honeywell FDCM Supported
HCF HART OPC server
Supported
Fisher ValveLink Supported
Flowserve - Valtek SoftTools Supported
Endress & Hauser FieldCare Supported
Emerson Process
Management
AMS v10
& previous
Supported
Applied System Technologies
Cornerstone Supported
6© 2015 Eaton, All Rights Reserved.
For IS and non-IS application
The MTL4850 uses
blocks of 32 channels
and up to 63 modules
per RS485 bus.
7© 2015 Eaton, All Rights Reserved.
MTL4850 mux details
• 32 channel ‘single brick’ solution• Economical, high-density interface• Not a master/slave architecture• Simple bus connection to pc• HART rev 5 – 7• DTM & DD file available
• Autobaud rate detection• No need for switches• Plug and play
• Ch to ch isolation• No single point of failure in signal connection• Complete channel separation
8© 2015 Eaton, All Rights Reserved.
Integrated connection HTP-SC32
All-in-one assembly with
options…..HTP-SC32-
-P250
-S150
-S200
-S240• Small footprint
• Takes less space than master+2slaves
• Easy termination board mounting
9© 2015 Eaton, All Rights Reserved.
HMP-HM64
Links with –
- general purpose
connection units,
HCU16 & HCU16AO
- MTL4500Series
backplanes for intrinsic
safety
10© 2015 Eaton, All Rights Reserved.
MTL4850 & MTL4500 Series
CPH-SC16
CPH-SC32
Combines 1ch or 2-ch
analogue I/O modules
with a 32ch HART
multiplexer
11© 2015 Eaton, All Rights Reserved.
Summary MTL4850
• Integrated HART multiplexer module
• Simple to add to IS & non-IS projects• Small footprint
• Complements MTL4840• Ch to ch isolation• No single point of failure in signal connection
• Plug and play
• Connection to SIL3 loops
12© 2015 Eaton, All Rights Reserved.
Mux SIL certification
13© 2015 Eaton, All Rights Reserved.
MTL4851/2 HART multiplexer system
• Additional members of the MTL4850 family
• Modular, flexible structure• MTL4850 – 32ch communication & mux module, SIL3
• MTL4851 – 16ch communication master & mux module
• MTL4852 – 16ch mux module
• HMM64/HMS64 - mux carrier
• HTP-SC16 – mux termination board
• Functional replacement for MTL4840
• MTL4851/2 extensible to 256ch capacity
• Lower cost/channel, support up to HART
rev7.
14© 2015 Eaton, All Rights Reserved.
MTL4851master/MTL4852 secondary
• Plug & play
• No switches on module
• HART rev7
• Up to 256 channels
• Faster than MTL4840
• MTL4851 includes 16ch
• MTL4852 adds further 16ch per module
15© 2015 Eaton, All Rights Reserved.
MTL4851/2 system
16© 2015 Eaton, All Rights Reserved.
HMM64 and HMS64backplanes
17© 2015 Eaton, All Rights Reserved.