senarai penerbitan tahun 2015 / list of publications in 2015 · senarai penerbitan tahun 2015 /...
TRANSCRIPT
Senarai Penerbitan Tahun 2015 / List of publications in 2015
2.5.1 Jurnal
JABATAN KEJURUTERAAN AEROANGKASA
1. Mohd Salahuddin, M.B., Norkhairunnisa, M., Mustapha, F., 2015, A review on thermophysical evaluation of alkali-
activated geopolymers, Ceramics International, 41(3), pp 4273-4281
2. Toozandehjani, M., Matori, K.A., Ostovan, F., Mustapha, F., Zahari, N.I., Oskoueian, A., 2015, On the correlation
between microstructural evolution and ultrasonic properties: a review, Journal of Materials Science, 50(7), pp 2643-
2665
3. Norkhairunnisa, M., Fariz, M.N.M., 2015, Geopolymer: A review on physical properties of inorganic aluminosilicate
coating materials, Materials Science Forum, 803(2015), pp 367-373
4. Norkhairunnisa Mazlan, Norasiah Termazi, Suraya Abdul Rashid & Saeed Rahmanian, 2015, Investigations on
Composite Flexural Behaviour with Inclusion of CNT Enhanced Silica Aerogel in Epoxy Nanocomposites, Applied
Mechanics and Materials, 696(2015), pp 179-182
5. Djojodihardjo, H., Wei, A.K.L., 2015, Hybrid wing body business jet conceptual design and aerodynamic study,
International Journal of Mechanical and Mechatronics Engineering, 15(2), pp 42-55
6. Abu, M.A., Harun, H., Harmin, M.Y., Wahab, N.I.A., 2015, Low complexity of acsACS architecture for space time
trellis code viterbi decoder, International Journal of Applied Engineering Research, 10(4), pp 8927-8939
7. Djojodihardjo, H., 2015, Vibro-acoustic analysis of the acoustic-structure interaction of flexible structure due to
acoustic excitation, Acta Astronautica, 108(2015), pp 129-145
8. Abdullah, E.J., Majid, D.L., Romli, F.I., Gaikwad, P.S., Yuan, L.G., Harun, N.F., 2015, Active control of strain in a
composite plate using shape memory alloy actuators, International Journal of Mechanics and Materials in Design,
11(1), pp 25-39
9. Yusoff, H., Abdullah, M.Z., Abdul Mujeebu, M., Ahmad, K.A., 2015, Effect of skin flexibility on aerodynamic
performance of flexible skin flapping wings for micro air vehicles, Experimental Techniques, 39(1), pp 11-20
10. Djojodihardjo, H., Jafari, M., Wiriadidjaja, S., Ahmad, K.A., 2015, Active Vibration Suppression of an Elastic
Piezoelectric Sensor and Actuator Fitted Cantilevered Beam Configurations as a Generic Smart Composite Structure,
Composite Structures, 132(2015), pp 848-863
11. Ismail,Z., Varatharajoo, R., Ajir, R., Mohd Rafie, A.S., 2015, Enhanced Attitude Control Structure for Small Satellites
with Reaction Wheels, Aircraft Engineering and Aerospace Technology, 87(6), pp 546-550
12. Hong, A.A.T., Varatharajoo, R., Romli, F., 2015, Analytic Solutions for Tethered Satellite System (TSS) subject to
Internal and External Torques undergoing a Spin-up and Spin-down Maneuvers, Aircraft Engineering and Aerospace
Technology, 87(6), pp 514-520
13. Chak, Y. -C., Varatharajoo, R., 2015, A Novel Design of Spacecraft Combined Attitufe & Sun Tracking System using
a Versatile Fuzzy Controller, Aircraft Engineering and Aerospace Technology, 87(6), pp 530-539
14. Sabaruddin, A.A., Wiriadidjaja, S., Mohd Rafie, A.S., Romli, F.I., Djojodihardjo, H., 2015, Engine optimization by
using variable valve timing system at low engine revolution, ARPN Journal of Engineering and Applied Sciences,
10(20), pp 9730-9735
15. Hong, A.A.T., Varatharajoo, R., 2015, Dynamics of a flexible tethered satellite system utilising various materials for
coplanar and non-coplanar models, Advances in Space Research, 56(4), pp 648-663
16. Chew, J. , Varatharajoo, R., 2015, Numerical investigation of MHD flow in combined attitude and thermal control
system, ARPN Journal of Engineering and Applied Sciences, 10(21), pp 10043-10047
17. Romli, F., Harmin, M.Y., 2015, Use of Monte Carlo method to estimate subsystem redesign risk for complex
products: Aircraft redesign case study, Aircraft Engineering and Aerospace Technology, 87(6), pp 563-570
18. Safri, S.N.A., Sultan, M.T.H., Cardona, F., 2015, Impact damage evaluation of Glass-Fiber Reinforced Polymer
(GFRP) using the drop test rig - An experimental based approach, ARPN Journal of Engineering and Applied
Sciences, 10(20), pp 9916-9928
19. Zubair, M., Ahmad, K.A., Abdullah, M.Z., Sufian, S.F., 2015, Characteristic airflow patterns during inspiration and
expiration: Experimental and numerical investigation, Journal of Medical and Biological Engineering, 35(3), pp 387-
394
Senarai Penerbitan Tahun 2015 / List of publications in 2015
20. Marzuki, O.F., Mohd Rafie, A.S., Romli, F.I., Ahmad, K.A., 2015, An experimental investigation on the effect of
surface roughness on the performance of Magnus wind turbine, ARPN Journal of Engineering and Applied Sciences,
10(20), pp 9725-9729
21. Djojodihardjo, H., Rahim, K.A.A., 2015, Two-dimensional CFD simulation for visualization of flapping wing
ornithopter studies, ARPN Journal of Engineering and Applied Sciences, 10(20), pp 10018-10026
22. Ismail, Z., Varatharajoo, R., 2015, Reaction wheel configurations for high and middle inclination orbits, ARPN
Journal of Engineering and Applied Sciences, 10(21), pp 10034-10042
23. Yin, C.M., Wiriadidjaja, S., Abd Majid, D.L., bin Romli, F.I., Shakrine, A., Rafie, M., Zhahir, A., 2015, Review on the
cost and performance of a WIGE craft: A commercialization prospective, ARPN Journal of Engineering and Applied
Sciences, 10(21), pp 10027-10033
24. Nabila, H., Hamat, S., Arumugam, L., Umaira, A., Alibe, I.M., Golshan, M., Majid, D.L., 2015, Glass/epoxy woven
composite laminate design based on nonlinear results, ARPN Journal of Engineering and Applied Sciences, 10(21),
pp 9992-9998
25. Romli, F.I., Asmadi, A.N., Dasuki, N., 2015, Ergonomics study of vertical seat design for standing cabin concept in
commercial transport aircraft, International Review of Aerospace Engineering, 8(3), pp 101-106
26. Ramli, A.S.S., Djojodihardjo, H., 2015, Computational study on the influence of dynamic stall on the unsteady
aerodynamics of Flapping Wing ornithopter, ARPN Journal of Engineering and Applied Sciences, 10(21), pp 9999-
10006
27. Marzuki, O.F., Rafie, A.S.M., Romli, F.I., Ahmad, K.A., 2015, Torque performance study of Magnus Wind Turbine,
International Review of Mechanical Engineering, 9(1), pp 38-42
28. Nisreen N. Ali, F. Mustapha, S. M. Sapuan, R. S. M. Rashid, Ahmad, K.A., 2015, An Approach and Experimental
Technique for Damage Detection of Composite Panels using PZT Sensor, International Journal of Civil and Structural
Engineering Research, 3(1), pp 29-38
Senarai Penerbitan Tahun 2015 / List of publications in 2015
JABATAN KEJURUTERAAN AWAM
1. Jebur, M.N., Pradhan, B., Tehrany, M.S., 2015, Manifestation of LiDAR-derived parameters in the spatial prediction
of landslides using novel ensemble evidential belief functions and support vector machine models in GIS, IEEE
Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 8(2), pp 674-690
2. Anggraini, V., Asadi, A., Huat, B.B.K., Nahazanan, H., 2015, Effects of coir fibers on tensile and compressive
strength of lime treated soft soil, Measurement: Journal of the International Measurement Confederation, 59(2015),
pp 372-381
3. Shahbazpanahi, S., Abang Ali, A.A., Kamgar, A., Farzadnia, N, 2015, Fracture mechanic modeling of fiber
reinforced polymer shear-strengthened reinforced concrete beam, Composites Part B: Engineering, 68(2015), pp
113-120
4. Mahyat Shafapour Tehrany, Biswajeet Pradhan, Shattri Mansor, Noordin Ahmad, 2015, Flood Susceptibility
Assessment using GIS-based Support Vector Machine Model with Different Kernel Types, Catena, 125 (2015), pp
91-101
5. Hong, H., Pradhan, B., Xu, C., Tien Bui, D., 2015, Spatial prediction of landslide hazard at the Yihuang area (China)
using two-class kernel logistic regression, alternating decision tree and support vector machines, Catena, 133 (2015),
pp 266-281
6. Salih, M.A., Farzadnia, N., Abang Ali, A.A., Demirboga, R., 2015, Effect of different curing temperatures on alkali
activated palm oil fuel ash paste, Construction and Building Materials, 94 (2015), pp 116-125
7. Salih, M.A., Farzadnia, N., Abang Ali, A.A., Demirboga, R., 2015, Development of high strength alkali activated
binder using palm oil fuel ash and GGBS at ambient temperature, Construction and Building Materials, 94 (2015), pp
116-125
8. Tehrany, M.S., Pradhan, B., Jebur, M.N., 2015, Flood susceptibility analysis and its verification using a novel
ensemble support vector machine and frequency ratio method, Stochastic Environmental Research and Risk
Assessment, 29 (4), pp 1149-1165
9. Nima Farzadnia, Hossein Noorvand, Abdirahman Mohamed Yasin, Farah Nora A. Aziz, 2015, The effect of nano
silica on short term drying shrinkage of POFA cement mortars, Construction and Building Materials, 95 (2015), pp
636-646
10. Ghobadi, Y., Pradhan, B., Shafri, H.Z., bin Ahmad, N., Kabiri, K., 2015, Spatio-temporal remotely sensed data for
analysis of the shrinkage and shifting in the Al Hawizeh wetland, Environmental monitoring and assessment, 187
(4156), pp 1-17
11. Nikbakht, E., Rashid, K., Hejazi, F., Osman, S.A., 2015, Application of shape memory alloy bars in self-centring
precast segmental columns as seismic resistance, Environmental monitoring and assessment, 187 (4156), pp 1-17
12. Youssef, A.M., Pradhan, B., Jebur, M.N., El-Harbi, H.M., 2015, Landslide susceptibility mapping using ensemble
bivariate and multivariate statistical models in Fayfa area, Saudi Arabia, Environmental Earth Sciences, 73 (7), pp
3745-3761
13. Abdullahi, S., Pradhan, B., Mansor, S., Shariff, A.R.M., 2015, GIS-based modeling for the spatial measurement and
evaluation of mixed land use development for a compact city, GIScience and Remote Sensing, 52 (1), pp 18-39
14. Hamza, S.M., Ahsan, A., Imteaz, M.A., Rahman, A., Mohammad, T.A., Ghazali, A.H., 2015, Accomplishment and
subjectivity of GIS-based DRASTIC groundwater vulnerability assessment method: a review, Environmental Earth
Sciences, 73 (7), pp 3063-3076
15. Ghiyamat, A., Shafri, H.Z.M., Mahdiraji, G.A., Ashurov, R., Shariff, A.R.M., Mansour, S., 2015, Airborne
hyperspectral discrimination of tree species with different ages using discrete wavelet transform, International Journal
of Remote Sensing, 36 (1), pp 318-342
16. Neshat, A., Pradhan, B., 2015, An integrated DRASTIC model using frequency ratio and two new hybrid methods for
groundwater vulnerability assessment, Natural Hazards, 76 (1), pp 543-563
17. Lim, P.N., Wu, T.Y., Clarke, C., Nik Daud, N.N., 2015, A potential bioconversion of empty fruit bunches into organic
fertilizer using Eudrilus Eugeniae, International Journal of Environmental Science and Technology, 12 (8), pp 2533-
2544
Senarai Penerbitan Tahun 2015 / List of publications in 2015
18. Neshat, A., Pradhan, B., 2015, Risk assessment of groundwater pollution with a new methodological framework:
application of Dempster–Shafer theory and GIS, Natural Hazards, 78 (2015), pp 1565-1585
19. Jebur, M.N., Pradhan, B., Shafri, H.Z.M., Yusoff, Z.M., Tehrany, M.S., 2015, An integrated user-friendly ArcMAP tool
for bivariate statistical modelling in geoscience applications, Geoscientific Model Development, 8 (3), pp 881-891
20. Montakhab, A., Yusuf, B., Folkard, A.M., 2015, Flow and turbulence in vegetation in a channel, Proceedings of the
Institution of Civil Engineers: Water Management, 168(1), pp 16-23
21. Ghobadi, Y., Pradhan, B., Sayyad, G.A., Kabiri, K., Falamarzi, Y., 2015, Simulation of hydrological processes and
effects of engineering projects on the Karkheh River Basin and its wetland using SWAT2009, Quaternary
International, 374 (2015), pp 144-153
22. Hamedianfar, A., Shafri, H.Z.M., 2015, Detailed intra-urban mapping through transferable OBIA rule sets using
WorldView-2 very-high-resolution satellite images, International Journal of Remote Sensing, 36 (13), pp 3380-3396
23. Anggraini, V., Huat, B.B.K., Asadi, A., Nahazanan, H., 2015, Effect of Coir Fibers on the Tensile and Flexural
Strength of Soft Marine Clay, Journal of Natural Fibers, 12 (2), pp 185-200
24. Youssef, A.M., Pradhan, B., Al-Kathery, M., Bathrellos, G.D., Skilodimou, H.D., 2015, Assessment of rockfall hazard
at Al-Noor Mountain, Makkah city (Saudi Arabia) using spatio-temporal remote sensing data and field investigation,
Journal of African Earth Sciences, 101 (2015), pp 309-321
25. Elsergany, M., Ahsan, A., Aziz, Md.M.A., 2015, Optimizing the performance of a paper mill effluent treatment, Sains
Malaysiana, 44 (1), pp 101-106
26. Tien Bui, D., Tran, C.T., Pradhan, B., Revhaug, I., Seidu, R., 2015, iGeoTrans – a novel iOS application for GPS
positioning in geosciences, Geocarto International, 30 (2), pp 202-217
27. Abdullahi, S., Pradhan, B., Jebur, M.N., 2015, GIS-based sustainable city compactness assessment using
integration of MCDM, Bayes theorem and RADAR technology, Geocarto International, 30 (4), pp 365-387
28. Raghunandan, M.E., Sharma, J.S., Pradhan, B., 2015, A review on the effect of rubber membrane in triaxial tests,
Arabian Journal of Geosciences, 8 (5), pp 3195-3206
29. Hejazi, F., Shoaei, M.D., Jaafar, M.S., Rashid, R.S.B.M., 2015, Effect of viscous dampers on yielding mechanisms of
RC structures during earthquake, Earthquake and Structures, 8 (6), pp 1499-1528
30. Bui, D.T., Pradhan, B., Revhaug, I., Nguyen, D.B., Pham, H.V., Bui, Q.N., 2015, A novel hybrid evidential belief
function-based fuzzy logic model in spatial prediction of rainfall-induced shallow landslides in the Lang Son city area
(Vietnam), Geomatics, Natural Hazards and Risk, 6 (3), pp 243-271
31. Kheradmand, B., Muniandy, R., Hua, L.T., Solouki, A., 2015, A laboratory investigation on the rheological properties
of aged and unaged organic wax modified asphalt binders, Petroleum Science and Technology, 33 (7), pp 757-764
32. Solouki, A., Muniandy, R., Hassim, S., Kheradmand, B., 2015, Rheological property investigation of various sasobit-
modified bitumen, Petroleum Science and Technology, 33 (7), pp 773-779
33. Pourakbar, S., Asadi, A., Huat, B.B.K., Fasihnikoutalab, M.H., 2015, Stabilization of clayey soil using ultrafine palm
oil fuel ash (POFA) and cement, Transportation Geotechnics, 3 (2015), pp 24-35
34. Neshat, A., Pradhan, B., Javadi, S., 2015, Risk assessment of groundwater pollution using Monte Carlo approach in
an agricultural region: An example from Kerman Plain, Iran, Computers, Environment and Urban Systems, 50 (2015),
pp 66-73
35. Amir Fateh, Farzad Hejazi, Mohd Saleh Jaafar, Izian Abd. Karim, Azlan Bin Adnan, 2015, Dynamic Analysis of
Variable Stiffness Bracing System in Structure, Applied Mechanics and Materials, 704 (2015), pp 442-446
36. Teik Hua Law, Hussain Hamid, Chia Ning Goh, 2015, The Motorcycle to Passenger Car Ownership Ratio and
Economic Growth: A Cross-country Analysis, Journal of Transport Geography, 46 (2015), pp 122-128
37. Teik Hua Law, 2015, Factor Asassociated with the Relationship between Non-fatal Road Injuries and Economic
Growth, Transport Policy, 42 (2015), pp 166-172
38. Yusoff, S., Pradhan, B., Manap, M.A., Shafri, H.Z.M., 2015, Regional gold potential mapping in Kelantan (Malaysia)
using probabilistic based models and GIS, Open Geosciences, 7 (1), pp 149-161
39. Hainin, M.R., Aziz, M.M.A., Feizabadi, S.M., Jaya, R.P., Hassan, N.A., Jakarni, F.M., 2015, An overall review:
Modified asphalt binder containing sasobit in warm-mix asphalt technology, Jurnal Teknologi, 73 (4), pp 1-6
40. Anggraini, V., Huat, B.B.K., Asadi, A., Nahazanan, H., 2015, Relationship between the compressive and tensile
strengths of lime-treated clay containing coconut fibres, Acta Geotechnica Slovenica, 12 (1), pp 49-57
Senarai Penerbitan Tahun 2015 / List of publications in 2015
41. Jakarni, F.M., Yusoff, N.I.M., Wu, J., Aziz, M.M.A., 2015, Utilization of sewage sludge molten slag as aggregate
substitute in asphalt mixtures, Jurnal Teknologi, 73 (4), pp 105-110
42. Fasihnikoutalab, M.H., Westgate, P., Huat, B.B.K., Asadi, A., Ball, R.J., Nahazanan, H., Singh, P., 2015, New
insights into potential capacity of olivine in ground improvement, Electronic Journal of Geotechnical Engineering, 20
(8), pp 2137-2148
43. Voo, Y.L., Foster, S.J., Voo, C.C., 2015, Ultrahigh-Performance Concrete Segmental Bridge Technology: Toward
Sustainable Bridge Construction, Journal of Bridge Engineering, 20 (8)
44. Imteaz, M.A., Ahsan, A., 2015, MUSIC for cost optimisation of stormwater treatment systems, International Journal
of Water, 9 (3), pp 302-314
45. Rana Amir Yousif, Ratnasamy Muniandy, Salihudin Hassim, Fauzan Jakarni, Eltaher Aburkaba, 2015, An Overview
of Quantification of Fatigue Resistance of Asphalt Mixture using Pre-aged Binder, WALIA Journal, 31 (S1), pp 125-
132
46. Noor Thamer, Bujang B.K. Huat, Eltaher Aburkaba, Thamer A. Mohamed, Sina Kazemian, 2015, Effect of
Formamide, Calcium Chloride and Aluminium Chloride on Stabilization of Peat with Cement-sodium Silicate Grout,
WALIA Journal, 31 (S4), pp 202-206
47. Teik Hua Law, Mahshid Ghanbari, Hussain Hamid, Alfian Abdul-Halin, Choy Peng Ng, 2015, Examining the Effect of
Visual Treatments on Truck Drivers' Time-to-arrival Judgments of Motorcycles at T-intersections, Transportation
Research Part F, 33 (2015)
48. Dibs, H., Mansor, S., Ahmad, N., Pradhan, B., 2015, Band-to-band Registration Model for Near-equatorial Earth
Observation Satellite Images with the use of Automatic Control Point Extraction, International Journal of Remote
Sensing, 36 (8), pp 2184-2200
49. Samsudin, S.H., Shafri, H.Z.M, Hamedianfar, A. , Mansor, S., 2015, Spectral Feature Selection and Classification of
Roofing Materials using Field Spectroscopy Data, Journal of Applied Remote Sensing, 9 (1)
50. Shahi, K., Shafri, H.Z.M., Taherzadeh, E., Mansor, S., Muniandy, R., 2015, A Novel Spectral Index to Automatically
Extract Road Network from WorldView-2 Satellite Imagery, Eqyption Journal of Remote Sensing and Space Science,
18 (1), pp 27-33
51. Alsharif, A.A.A. , Pradhan, B. , Mansor, S. , Shafri, H.Z.M., 2015, Urban expansion assessment by using remotely
sensed data and the relative Shannon entropy model in GIS: A case study of Tripoli, Libya, Theoretical and Empirical
Researches in Urban Management, 10 (1), pp 55-71
52. Ahsan, A., Alamgir, M., Imteaz, M., Shams, S., Rowshon, M.K., Aziz, M.G., Idrus, S., 2015, Municipal solid waste
generation, composition and management: Issues and challenges. A case study, Environment Protection
Engineering, 41 (3), pp 43-59
53. Dehnavi, A., Aghdam, I.N., Pradhan, B., Morshed Varzandeh, M.H., 2015, A new hybrid model using step-wise
weight assessment ratio analysis (SWARA) technique and adaptive neuro-fuzzy inference system (ANFIS) for
regional landslide hazard assessment in Iran, Catena, 135 (2015), pp 122-148
54. Imteaz, M.A., Paudel, U., Ahsan, A., Santos, C., 2015, Climatic and spatial variability of potential rainwater savings
for a large coastal city, Resources, Conservation and Recycling, 105 (2015), pp 143-147
55. Zahidi, I., Yusuf, B., Hamedianfar, A., Shafri, H.Z.M., Mohamed, T.A., 2015, Object-based classification of QuickBird
image and low point density LIDAR for tropical trees and shrubs mapping, Resources, European Journal of Remote
Sensing, 48 (2015), pp 423-446
56. Yusof, N.M., Pradhan, B., Shafri, H.Z.M., Jebur, M.N., Yusoff, Z., 2015, Spatial landslide hazard assessment
along the Jelapang Corridor of the North-South Expressway in Malaysia using high resolution airborne LiDAR data,
Arabian Journal of Geosciences, 48 (2015), pp 423-446
57. Althuwaynee, O.F., Pradhan, B. , Ahmad, N., 2015, Estimation of rainfall threshold and its use in landslide hazard
mapping of Kuala Lumpur metropolitan and surrounding areas, Landslides, 12 (5), pp 861-875
58. Youssef, A.M., Pradhan, B., Pourghasemi, H.R., Abdullahi, S., 2015, Landslide susceptibility assessment at Wadi
Jawrah Basin, Jizan region, Saudi Arabia using two bivariate models in GIS, Geosciences Journal, 19 (3), pp 449-
469
59. Fateh, A., Hejazi, F., Ming, Y.P., Jafaar, M.S., 2015, Structural behavior in top-down excavation method, Arabian
Journal of Geosciences, 8 (9), pp 7399-7408
Senarai Penerbitan Tahun 2015 / List of publications in 2015
60. Abdi, H., Hejazi, F., Saifulnaz, R., Karim, I.A., Jaafar, M.S., 2015, Structural behavior in top-down excavation
method, Arabian Journal of Geosciences, 8 (9), pp 7399-7408
61. Youssef, A.M., Pradhan, B., Sefry, S.A., Abdullah, M.M.A., 2015, Use of geological and geomorphological
parameters in potential suitability assessment for urban planning development at Wadi Al-Asla basin, Jeddah,
Kingdom of Saudi Arabia, Arabian Journal of Geosciences, 8 (8), pp 5617-5630
62. Yang, Z.-Y., Pourghasemi, H.R., Pradhan, B., Chen, T.-C., Lee, Y.-H., 2015, An index to describe the earthquake
effect on subsequent landslides in Central Taiwan, Arabian Journal of Geosciences, 8 (5), pp 3139-3147
63. Maerz, N.H., Youssef, A.M., Pradhan, B., Bulkhi, A., 2015, Remediation and mitigation strategies for rock fall
hazards along the highways of Fayfa Mountain, Jazan Region, Kingdom of Saudi Arabia, Arabian Journal of
Geosciences, 8 (5), pp 2633-2651
64. Jahanshiri, E., bin Mohamed Shariff, A.R., Amiri, F., Soom, M.A.M., Wayayokb, A., Buyonga, T., Pradhan, B., 2015,
Spatial soil analysis using geostatistical analysis and map Algebra, Arabian Journal of Geosciences, 8 (11), pp 9775-
9788
65. Jebur, M.N., Pradhan, B., Tehrany, M.S., 2015, Using ALOS PALSAR derived high-resolution DInSAR to detect
slow-moving landslides in tropical forest: Cameron Highlands, Malaysia, Geomatics, Natural Hazards and Risk, 6 (8),
pp 741-759
66. Youssef, A.M., Pradhan, B., Sefry, S.A., 2015, Remote sensing-based studies coupled with field data reveal urgent
solutions to avert the risk of flash floods in the Wadi Qus (east of Jeddah) Kingdom of Saudi Arabia, Natural Hazards,
75 (2), pp 1465-1488
67. Noor, M.J.M.M., Mohamed, E.H., Mohammad, T.A., Ghazali, A.H., 2015, Effectiveness of salt-extracted freeze-dried
Moringa oleifera as a coagulant, Desalination and Water Treatment, 55 (13), pp 3621-3627
68. Mohammad, T.A., Mohamed, E.H., Noor, M.J.M.M., Ghazali, A.H., 2015, Dual polyelectrolytes incorporating
Moringa oleifera in the dewatering of sewage sludge, Desalination and Water Treatment, 55 (13), pp 3621-3627
69. Omar, H., Ismail, M.H., Hamzah, K.A., Shafri, H.Z.M., Kamarudin, N., 2015, Estimating biomass in logged tropical
forest using L-band SAR (PALSAR) data and GIS, Sains Malaysiana, 44 (8), pp 1085-7093
70. Dadras, M., Shafri, H.Z.M., Ahmad, N., Pradhan, B., Safarpour, S., 2015, Spatio-temporal analysis of urban
growth from remote sensing data in Bandar Abbas city, Iran, Egyptian Journal of Remote Sensing and Space
Science, 18 (1), pp 35-52
71. Darain, K.M., Jumaat, M.Z., Nazimuddin, S.M., Ahsan, A., Rashid, R., Aziz, M.M.A., Obaydullah, M., Islam,
A.B.M.S., 2015, A review of the corrosion behavior of metallic heritage structures and artifacts, Jurnal Teknologi, 77
(1), pp 95-100
72. Praveena, S.M., Pradhan, B., Ismail, S.N.S., 2015, Spatial Assessment of Heavy Metals in Surface Soil from Klang
District(Malaysia): An Example from a Tropical Environment, Human and Ecological Risk Assessment, 21 (7), pp
1980-2003
73. Mohammed, K., Abd Karim, I., Abd Aznieta Aziz, N.F., Teik Hua, L., 2015, Continuous RC slab flexural limit state
optimization from slab depth consideration, International Journal of Applied Engineering Research, 10 (13), pp
33430-33437
74. Mohamed, E.H., Mohammad, T.A., Noor, M.J.M.M., Ghazali, A.H., 2015, Influence of extraction and freeze-drying
durations on the effectiveness of Moringa oleifera seeds powder as a natural coagulant, Desalination and Water
Treatment, 55 (13), pp 3628-3634
75. Arafat, H.A., Jijakli, K., Ahsan, A., 2015, Environmental performance and energy recovery potential of five
processes for municipal solid waste treatment, Journal of Cleaner Production, 105 (2015), pp 233-240
76. Pradhan, B., 2015, Geoinformation techniques in natural hazard modeling: Preface, Geoscience Frontiers, 6 (6), pp
791-792
77. Al-sharif, A.A.A., Pradhan, B., 2015, A novel approach for predicting the spatial patterns of urban expansion by
combining the chi-squared automatic integration detection decision tree, Markov chain and cellular automata models
in GIS, Geocarto International, 30 (8), pp 858-881
78. Aziz, M.M.A., Hamad, A.W., Maleka, A.M., Jakarni, F.M., 2015, Effect of viscoelastic behavior of cellulose oil palm
fiber (COPF) modified 60-70 asphalt binder for deterioration for roads and highways, Jurnal Teknologi, 75 (11), pp
17-23
Senarai Penerbitan Tahun 2015 / List of publications in 2015
79. Alwathaf, A.H., Thanoon, W.A., Jaafar, M.S., 2015, Finite-element analysis of an alternative masonry wall system,
Proceedings of the Institution of Civil Engineers: Structures and Buildings, 168 (4), pp 237-250
80. Nikbakht, E. , Rashid, K., Mohseni, I., Hejazi, F., 2015, Evaluating seismic demands for segmental columns with low
energy dissipation capacity, Earthquake and Structures, 8 (8), pp 1277-1297
81. Khaleel, M.R., Ahsan, A., Imteaz, M., El-Sergany, M.M., Nik Daud, N.N., Mohamed, T.A., Ibrahim, B.A., 2015,
Performance of GACC and GACP to treat institutional wastewater: A sustainable technique, Membrane Water
Treatment, 6 (4), pp 339-349
82. Youssef, A.M., Al-Kathery, M., Pradhan, B., 2015, Landslide susceptibility mapping at Al-Hasher area, Jizan (Saudi
Arabia) using GIS-based frequency ratio and index of entropy models, Geosciences Journal, 19 (1), pp 113-134, I.F
0.917
83. Sutan, N.M., Yakub, I., Jaafar, M.S., Matori, K.A., Sahari, S.K., 2015, Sustainable nanopozzolan modified cement:
Characterizations and morphology of calcium silicate hydrate during hydration, Journal of Nanomaterials, 2015
(2015), pp 1-6
84. Vivi Anggraini, Afshin Asadi, Bujang B. K. Huat, Haslinda Nahazanan, 2015, Performance of Chemically Treated
Natural Fibres and Lime in Soft Soil for the Utilisation as Pile-Supported Earth Platform, International Journal of
Geosynthetics and Ground Engineering, 3 (1), pp 29-38
85. Vivi Anggraini, Afshin Asadi, Bujang B. K. Huat, 2015, Durability of Lime Treated Soil Reinforced by Natural Fiber
under Bending Force, International Journal of Environmental, Chemical, Ecological, Geological and Geophysical
Engineering, 9 (12), pp 1319-1323
Senarai Penerbitan Tahun 2015 / List of publications in 2015
JABATAN KEJURUTERAAN BIOLOGI DAN PERTANIAN
1. Harmaen, A.S., Khalina, A., Azowa, I., Hassan, M.A., Tarmian, A., Jawaid, M., 2015, Thermal and biodegradation
properties of poly(lactic acid)/fertilizer/oil palm fibers blends biocomposites, Polymer Composites, 36 (3), pp 576-583
2. Meesuk, V., Vojinovic, Z., Mynett, A.E., Abdullah, A.F., 2015, Urban flood modelling combining top-view LiDAR data
with ground-view SfM observations, Advances in Water Resources, 75 (2015), pp 105-117
3. Ramin Nourqolipour, Abdul Rashid B. Mohamed Shariff, Siva K. Balasundram, Noordin B. Ahmad, Alias M. Sood,
Taher Buyong, Fazel Amiri, 2015, A GIS-based Model to Analyze the Spatial and Temporal Development of Oil Palm
Land use in Kuala Langat District, Malaysia, Environmental Earth Sciences, 73 (2015), pp 1687-1700
4. Irfan Ahmed Shaikh, Aimrun Wayayok, Ahmad Fikri Abdullah, Amin Mohammad soom & Munir Mangrio, 2015,
Assessment of Water Application Losses through Irrigation Surveys: A Case Study of Mirpurkhas Subdivision,
Jamrao Irrigation Scheme, Sindh, Pakistan, Malaysia, Indian Journal of Science and Technology, 8 (11), pp 1-15
5. Khairunnisa Hamdan, Samsuzana Abd Aziz, Azmi Yahya, Fakhrul Zaman Rokhani, Brian L. Steward, 2015,
Detection of Sludge Contamination in Crude Palm Oil using Dielectric Spectroscopy, Malaysia, Transactions of the
ASABE, 58 (24), pp 227-232
6. Bakhtiari, M.R., Ahmad, D., 2015, Determining physical and aerodynamic properties of garlic to design and develop
of a pneumatic garlic clove metering system, Agricultural Engineering International: CIGR Journal, 17 (1), pp 59-67
7. Huang, Y.F., Puah, Y.J., Chua, K.C., Lee, T.S., 2015, Analysis of monthly and seasonal rainfall trends using the
Holt's test, International Journal of Climatology, 35 (7), pp 1500-1509
8. Muazu, A., Yahya, A., Ishak, W.I.W., Khairunniza-Bejo, S., 2015, Energy audit for sustainable wetland paddy
cultivation in Malaysia, Energy, 87 (2015), pp 182-191
9. Al-Aqeeli, Y.H., AlMohseen, K.A., Lee, T.S., Aziz, S.A., 2015, Modelling monthly operation policy for the Mosul Dam,
northern Iraq, International Journal of Hydrology Science and Technology, 5 (2), pp 179-193
10. Al-Anbari, S., Khalina, A., Alnuaimi, A., Normariah, A., Yahya, A., 2015, Risk assessment of safety and health
(RASH) for building construction, Process Safety and Environmental Protection, 94 (2015), pp 149-158
11. Karim Ghorbani, Aimrun Wayayok, Masumeh Abbaszadeh and Ahmad Fikri., 2015, The effect of pipe collectors in
reducing the drainage coefficient rate, Water Science & Technology: Water Supply, 15 (4), pp 675-682
12. Zubairu Usman Bashar, Aimrun Wayayok, M.S.M. Amin and Mohammad Razif Mahadi, 2015, Single Seedling
Nursery Tray: An Innovative Breakthrough to Quality Seedling Raising Technique for SRI Transplanting Machine,
Research Journal of Applied Sciences, Engineering and Technology, 10 (11), pp 1258-1265
13. Hasfalina C. B, Man, Christopher O. Akinbile, & Chin X. Jun, 2015, Coconut Husk Adsorbent for the Removal of
Methylene Blue Dye from Wastewater, BioResources, 10 (2), pp 2859-2872
14. Peter Aderemi Adeoye, Hasfalina Che Man, Mohd. Amin Soom, Ahmad Mohammed Thamer, Akinbile Christopher
Oluwakunmi, 2015, Poultry Waste Generation, Management and the Environment: A Case of Minna, North Central
Nigeria, Journal of Solid Waste Technology and Management, 41 (2), pp 146-156
15. Norhashila Hashim, Rimfiel B. Janius, Manuela, 2015, Effect of Water Content on Backscattering Parameters,
Australian Journal of Basic and Applied Sciences, 9 (7), pp 265-268
16. Dauda, S. M., Ahmad, D., Khalina, A. & Jamarei, O., 2015, Effect of Cutting Speed on Cutting Torque and Cutting
Power of Varying Kenaf-Stem Diameters at Different Moisture Contents, Pertanika Journal of Tropical Agricultural
Science, 38 (4), pp 549-562
17. Mohammed, U., Wayayok, A., Soom, M.A.M., Abdan, K., 2015, Performance of Umar-srimat on Soil Water
Conservation and Weed Control in System of Rice Intensification, Jurnal Teknologi, 76 (15), pp 83-88
18. Nourqolipour, R., Shariff, A.R.B.M., Ahmad, N.B, Balasundram, S.K., Sood, A.M., Buyong, T., 2015, Multi-objective-
based Modeling for Land use Change Analysis in the South West of Selangor, Malaysia, Environmental Earth
Sciences, 74 (5), pp 4133-4143
19. Nika Alemahdi, Hasfalina Che Man, Nor' Aini Abd Rahman, Nima Nasirian, Yignan Yang, 2015, Enhanced
Mesophilic Bio-hydrogen Production of Raw Rice Straw and Activated Sewage Sludge by Co-digestion,
ScienceDirect, 40 (2015), pp 16033-16044
Senarai Penerbitan Tahun 2015 / List of publications in 2015
20. Shakeel Hussain Chattha, Che Man Hasfalina, Teang Shui Lee, Benish Nawaz Mirani, Muhammad Razif Mahadi,
2015, Effective and Economic Storage of Wheat Seed in Straw-clay Bin, International Journal of Biosciences, 6 (3),
pp 83-93
21. Shakeel Hussain Chattha, Che Man Hasfalina, Teang Shui Lee, Benish Nawaz Mirani, Muhammad Razif Mahadi,
2015, A Study on the Quality of Wheat Grain Stored in Straw-clay Bin, Journal of Biodiversity and Environmental
Sciences (JBES), 6 (1), pp 428-437
22. Ng Jing Lin, Samsuzana Abd Aziz, Huang Yuk Feng, Aimrun Wayayok, Md Rowshan Kamal, 2015, Homogeneity
Analysis of Rainfall in Kelantan, Malaysia, Jurnal Teknologi, 76 (15), pp 1-6
23. N. S. Dlamini, M. K. Rowshon, Ujjwal Saha, A. Fikri, S. H. Lai, M. S. F. Mohd, 2015, Developing and Calibrating a
Stochastic Rainfall Generator Model for Simulating Daily Rainfall by Markov Chain Approach, Jurnal Teknologi, 76
(15), pp 13-19
24. Fathin Ayuni Azizan, Mohamed Azwan Mohamed Zawawi, Ahmad Fikri Abdullah, 2015, Development of 3D Model
view of Potential Groundwater Aquifer for Irrigation using Geophysical Technique, Jurnal Teknologi, 76 (15)
25. Mohamed Azwan Mohamed Zawawi, Noorellimia Mat Toridi, Aimrun Wayayok, 2015, Detection of Fractured
Aquifer using Combination of Resistivity and induced Polarization Analysis, Jurnal Teknologi, 76 (15)
26. Nur'Athirah Muhadi, Ahmad Fikri Abdullah, 2015, Flood Damage Assessment in Agricultural Area in Selangor River
Basin, Jurnal Teknologi, 76 (15)
27. Adeoye, Peter Aderemi, Hasfalina Che Man, Abdullahi Mohammed Bello, 2015, Assessment of Agrochemicals
effect on Soil and Groundwater of Chanchaga Irrigation Scheme in Minna, North Central Nigeria, Jurnal Teknologi,
76 (15), pp 103-110
28. Amiri Ebrahim, Ahmadzadeh Araji Hamidreza, Wayayok, Aimrun, Rezaei Mojtaba, 2015, Simulation of Rice Yield
under Water and Salinity Stress in Rasht Area Aquacrop Model, Jurnal Teknologi, 76 (15), pp 21-28
29. Muhamad Askari, Mohd Azizi Mustafa, Budi Indra Setiawan, Mohd Amin Mohd Soom, Sobri Harun, Mohamed
Roseli Zainal Abidin, Zulkifli Yusop, 2015, A Combined Sensitivity Analysis of Seven Potential Evapotranspiration
Models, Jurnal Teknologi, 76 (15), pp 61-68
30. Faez Hussein Buraihi, Abdul Rashid Mohamed Shariff, 2015, Selection of Rainwater Harvesting Sites by using
Remote Sensing and GIS Techniques: A Case Study of Kirkuk, Iraq, Jurnal Teknologi, 76 (15)
31. Ahmed A. M. Al-Ogaidi, Aimrun Wayayok, Md Rowshon Kamal, Ahmed Fikri Abdullah, 2015, A Modified Empirical
Model for Estimating the Wetted Zone Dimensions under Drip Irrigation, Jurnal Teknologi, 76 (15)
32. Shakeel Hussain Chattha, Che Man Hasfalina, Muhammad Razif Mahadi, Benish Nawaz Mirani, 2015, Quality
Change of Wheat Grain during Storage in a Ferrocement Bin, ARPN Journal of Engineering and Applied Sciences,
10 (8), pp 313-323
33. Jahun, B.G., Ahmad, D., Mahdi, M.R., Sulaiman, S., 2015, Design optimization parameters for tractor mounted
mulcher blades, International Journal of Applied Engineering Research, 10 (23), pp 43461-43464
34. Altaie, M.A.H., Janius, R.B., Rashid, U., Taufiq-Yap, Y.H., Yunus, R., Zakaria, R., Adam, N.M., 2015, Performance
and exhaust emission characteristics of direct-injection diesel engine fueled with enriched biodiesel, Energy
Conversion and Management, 106 (2015), pp 356-372
35. Altaie, M.A.H., Janius, R.B., Rashid, U., Taufiq-Yap, Y.H., Yunus, R., Zakaria, R., Adam, N.M., 2015, Cold flow and
fuel properties of methyl oleate and palm-oil methyl ester blends, Fuel, 160 (2015), pp 238-244
36. Palizdan, N., Falamarzi, Y., Huang, Y.F., Lee, T.S., Ghazali, A.H., 2015, Temporal precipitation trend analysis at
the Langat river Basin, Selangor, Malaysia, Journal of Earth System Science, 124 (8), pp 1623-1638
37. Aziz, A.S.A., Manaf, L.A., Man, H.C., Kumar, N.S., 2015, Equilibrium studies and dynamic behavior of cadmium
adsorption by palm oil boiler mill fly ash (POFA) as a natural low-cost adsorbent, Desalination and Water Treatment,
54 (7), pp 1956-1968
38. Mazlan, A.Z., Hussain, H., Mohamed Zawawi, M.A., Sameni, M., 2015, Analytical Method Development For
Imazapic Herbicide Using High Performance Liquid Chromatography, Malaysian Journal of Analytical Sciences, 19
(4), pp 715-721
39. Ranya Fadlalla Abdalla Elsheikh, Abdul Rashid Mohamed Sahriff & Nilanchal Patel, 2015, Mango Suitability
Evaluation Based on GIS, Multi Criteria Weights and Sensitivity Analisys, International Journal of Advanced
Computer Research, 5 (2015), pp 25-34
Senarai Penerbitan Tahun 2015 / List of publications in 2015
40. Renny Eka Putri, Azmi Yahya, Nor Mariah Adam, Samsuzana Abdul Aziz, 2015, Related Fracture Resistance with
Moisture Content in Different Grain Orientation of Paddy Grain, Journal of Bioloy, Agriculture and Healthcare, 5 (11)
41. Siti Khairunniza-Bejo, Yusnida Yusoff, Nik Salwani Nik Yusoff, Idris Abu Seman, Mohamad Izzuddin Anuar, 2015,
Identification of Healhty and BSR-Infected Oil Palm Trees using Color Indices, International Journal of Biological,
Biomolecular, Agricultural, Food and Biotechnological Engineering, 9 (8), pp 764-767
42. A. N. N. Kakahy, D. Ahmad, M. Akhir, S. Sulaiman and A. Ishake, 2015, Effect of Cutting Speed, Moisture Contents
and Sweet Potato Varieties on Percentage of Vine Pulverization, Journal of Advanced Research in Applied
Mechanics, 12 (1), pp 1-7
43. S. A Sulaiman, M. A. M. Zawawi and E. H. Mohamed, 2015, Analysis of Tubewell Performance as an Evaluation of
the Physical Aquifer Model Being Developed, Journal of Advanced Review on Scientific Research, 11 (1), pp 37-45
44. Diyana Jamaludin, Samsuzana Abd Aziz, Desa Ahmad, Hawa Z.E. Jaafar, 2015, Impedance analysis of Labisia
Pumila plant water status, Information Processing in Agriculture, 2 (2015), pp 161-168
Senarai Penerbitan Tahun 2015 / List of publications in 2015
JABATAN KEJURUTERAAN ELEKTRIK DAN ELEKTRONIK
1. Thangasamy, V., Kamsani, N.A., Hamidon, M.N., Hashim, S.J., Yusoff, Z., Bukhori, M.F., 2015, Low power 18T pass
transistor logic ripple carry adder, IEICE Electronics Express, 12 (6), pp 1-12
2. Norhisam, M., Aravind, C.V., Khodijah, S., Mailah, N.F., 2015, Unified control structure of multi-type interior
permanent magnet motor, Journal of Engineering Science and Technology, 10 (3), pp 322-339
3. Izadi, M., Ab Kadir, M.Z.A., Hajikhani, M., 2015, On the lightning electromagnetic fields due to channel with variable
return stroke velocity, Mathematical Problems in Engineering, 2015, pp 1-9
4. Mirshekaran, M., Piltan, F., Sulaiman, N., Salehi, A., Kazeminasab, M., Esmaeili, Z., 2015, Hand tremors reduction
based on integral intelligent filter computed torque controller, International Journal of Bio-Science and Bio-
Technology, 7 (1), pp 105-120
5. Riadh, M.H., Ahmad, S.A.B., Marhaban, M.H., Soh, A.C., 2015, Infrared Heating in Food Drying: An Overview,
Drying Technology, 33 (3), pp 322-335
6. Rezaee Jordehi, A., Jasni, J., Abd Wahab, N., Kadir, M.Z., Javadi, M.S., 2015, Enhanced leader PSO (ELPSO): A
new algorithm for allocating distributed TCSC's in power systems, International Journal of Electrical Power and
Energy Systems, 64 (2015), pp 771-784
7. Ariffen, A.M., Ab-Kadir, M.Z.A., Gomes, C., Jasni, J., 2015, The influence of a curved on copper-type down
conductor, Jurnal Teknologi, 72 (5), pp 63-70
8. Al-Masri, A.N., Ab Kadir, M.Z.A., Hizam, H., Mariun, N., 2015, Simulation of an adaptive artificial neural network for
power system security enhancement including control action, Applied Soft Computing Journal, 29 (2015), pp 1-11
9. Khoshsirat, N., Md Yunus, N.A., Hamidon, M.N., Shafie, S., Amin, N., 2015, Analysis of absorber and buffer layer
band gap grading on CIGS thin film solar cell performance using SCAPS, Pertanika Journal of Science and
Technology, 23 (2), pp 241-250
10. Lutfy, O.F., Selamat, H., Noor, S.B.M., 2015, Intelligent Modeling and Control of a Conveyor Belt Grain Dryer Using
a Simplified Type 2 Neuro-Fuzzy Controller, Drying Technology, 33 (2015), pp 1210-1222
11. Bateni, N.H., Hamidon, M.N., Matori, K.A., Arab, A., 2015, P–E hysteresis loop evaluation and dielectric studies of
ceramic obtained from white rice husk ash for electronic applications, Journal of Materials Science: Materials in
Electronics, 26 (2015), pp 6157-6162
12. Lotfivand, N., Hamidon, M.N., Abdolzadeh, V., 2015, Fault tolerant architecture for artificial olfactory system,
Measurement Science and Technology, 26 (5), pp 1-9
13. Jahani Fariman, H., Ahmad, S.A., Hamiruce Marhaban, M., Ali Jan Ghasab, M., Chappell, P.H., 2015, Simple and
Computationally Efficient Movement Classification Approach for EMG-controlled Prosthetic Hand: ANFIS vs. Artificial
Neural Network, Intelligent Automation and Soft Computing, 21 (4), pp 559-573
14. Faghani, M., Isa, M.B., Hamidan, M.N., 2015, Integration of Sigma-Delta ADC with sine filter on FPGA, Journal of
Engineering and Applied Sciences, 10 (2), pp 16-21
15. Lioe, D.X., Shafie, S., Ramiah, H., Sulaiman, N., Halin, I.A., 2015, Low power transmitter for capsule endoscope,
Springer Series in Materials Science, 204 (2015), pp 111-122
16. Khoshsirat, N., Md Yunus, N.A., Hamidon, M.N., Shafie, S., Amin, N., 2015, Analysis of absorber layer properties
effect on CIGS solar cell performance using SCAPS, Optik, 126 (2015), pp 681-686
17. Lim, S.C., Gomes, C., Kadir, M.Z.A.A., Nourirad, G., Malek, Z.A., 2015, Behaviour of backfill materials for electrical
grounding systems under high voltage conditions, Journal of Engineering Science and Technology, 10 (6), pp 811-
826
18. M. Effendy Ya'acob, H. Hizam, Y. Hashimoto, B. Adam, N.F. Othman, 2015, Field Evaluation of Five-level Heat
Dissipation Models under PV Array Structure Installed in the Tropics, Applied Mechanics and Materials, 789-790
(2015), pp 416-421
19. Rameli, N., Ab-Kadir, M.Z.A., Izadi, M., Gomes, C., Azis, N., 2015, Effect of the Grounding on the Lightning Current
Profile along a Tall Structure, IET Science, Measurement and Technology, 9 (6), pp 717-727
20. Rahman, N.F.A., Radzi, M.A.M., Soh, A.C., Mariun, N., Rahim, N.A., 2015, Dual Function of Unified Adaptive Linear
Neurons Based Fundamental Component Extraction Algorithm for Shunt Active Power Filter Operation, International
Review of Electrical Engineering, 10 (4), pp 544-552
Senarai Penerbitan Tahun 2015 / List of publications in 2015
21. Amin, A.F.M., Rahman, A.I.A., Salim, S.N.S., Aris, I.B., Suliaman, M.S., Mohamad, R.T., Zulkefle, A.A, 2015,
Cost effective remote monitoring for mini hybrid automation system, International Journal of Applied Engineering
Research, 10 (23), pp 43663-43668
22. Al-Qazzaz, N.K., Mohd Ali, S.H.B., Ahmad, S.A., Islam, M.S., Escudero, J., 2015, Selection of mother wavelet
functions for multi-channel EEG signal analysis during a working memory task, Sensors (Switzerland), 15 (11), pp
29015-29035
23. Ghavamian, A., Maghami, M.R., Dehghan, S., Gomes, C., 2015, Concerns of corrosive effects with respect to
lightning protection systems, Engineering Failure Analysis, 57 (2015), pp 434-443
24. Maghami, M.R., Asl, S.N., Rezadad, M.E., Ale Ebrahim, N., Gomes, C., 2015, Qualitative and quantitative analysis
of solar hydrogen generation literature from 2001 to 2014, Scientometrics, 105 (2), pp 759-771
25. Garmabdari, R., Shafie, S., Wan Hassan, W.Z., Garmabdari, A., 2015, Study on the effectiveness of dual
complementary Hall-effect sensors in water flow measurement for reducing magnetic disturbance, Flow
Measurement and Instrumentation, 45 (2015), pp 280-287
26. Maghami, M., Hizam, H., Gomes, C., Hajighorbani, S., Rezaei, N., 2015, Evaluation of the 2013 southeast Asian
haze on solar generation performance, PLoS ONE, 10 (8)
27. Rusli, H., Gomes, C., Kadir, Z., Abdul-Malek, Z., 2015, Surface arcing of insulators due to bentonite contamination,
Journal of Electrostatics, 76 (2015), pp 73-77
28. Sabry, A.H., Wan Hasan Mohd Zainal, W.Z., Amran, M., Shafie, S.B., 2015, High efficiency integrated solar home
automation system based on DC load matching technique, ARPN Journal of Engineering and Applied Sciences, 10
(15), pp 6424-6434
29. Aravind, C.V., Norhisam, M., Suresh, K.M., Ramesh, G.P., 2015, Assessment on the harnessing of the energy from
the back pressure chamber of palm oil mill, Journal of Engineering Science and Technology, 10 (8), pp 46-56
30. Mary, A.K., Gomes, C., 2015, Lightning safety of under-privileged communities around Lake Victoria, Geomatics,
Natural Hazards and Risk, 6 (8), pp 669-685
31. Parvez Iqbal, A.K.M., Zabri, N.H.M., Sahari, K.S.M., Asif Iqbal, A.K.M., Aris, I., 2015, Process involved in designing
of an intelligent additional track mechanism tracked vehicle for swamp peat terrain, Indian Journal of Science and
Technology, 8 (17)
32. Esmaile, M.F., Marhaban, M.H., Mahmud, R. , Saripan, M.I., 2015, Ultrasound thyroid gland volume estimation: A
review, Current Medical Imaging Reviews, 11 (2), pp 85-90
33. Gasim Mohamed, S. , Jasni, J., Radzi, M.A.M., Hizam, H., 2015, Enhancement of environment-friendly power grids'
flexibility to successfully host RESs and Evs, ARPN Journal of Engineering and Applied Sciences, 10 (21), pp 9842-
9848
34. Mohammed, S.K., Mohd Radzi, N.M.M.A., Wahab, N.I.A., Lurwan, S.M., 2015, Islanding detection using inverter DC-
Link voltage, ARPN Journal of Engineering and Applied Sciences, 10 (21), pp 9932-9936
35. Mohd, T.A.T., Hassan, M.K., Aris, I.a, Che Soh, A., Ibrahim, B.S.K.K., Hat, M.K., 2015, Simulation based study of
electric vehicle parameters, ARPN Journal of Engineering and Applied Sciences, 10 (19), pp 8541-8546
36. Lai, G.R., Che Soh, A., Sarkan, H.M., Abdul Rahman, R.Z., Hassan, M.K., 2015, Controlling traffic flow in multilane-
isolated intersection using anfis approach techniques, Journal of Engineering Science and Technology, 10 (8), pp
1009-1034
37. Jaberi, S.M., Piltan, F., Sahamijoo, A., Sulaiman, N.B, 2015, Intelligent prevent the risk of carcinoma of the lung
progression, International Journal of Bio-Science and Bio-Technology, 7 (4), pp 179-202
38. Mohammad, S.G. , Gomes, C., AbKadir, M.Z.A., Jasni, J., Izadi, M., 2015, Protection technique for transient
overvoltage due to capacitor bank switching in distribution systems using high pass filter, ARPN Journal of
Engineering and Applied Sciences, 10 (22), pp 17151-17157
39. Toosi, S., Misron, N., Hanamoto, T., Aris, I., Mohd Radzi, M.A., Yamada, H., 2015, The Study of Operation Modes
and Control Strategies of a Multidirectional MC for Battery Based System, Mathematical Problems in Engineering,
2015 (2015), pp 1-14
40. Doljinsuren, M., Gomes, C., 2015, Lightning incidents in Mongolia, Geomatics, Natural Hazards and Risk, 6 (8), pp
686-701
Senarai Penerbitan Tahun 2015 / List of publications in 2015
41. Hajighorbani, S., Radzi, M.A.M., Kadir, M.Z.A.A., Shafie, S., 2015, Dual search maximum power point (DSMPP)
algorithm based on mathematical analysis under shaded conditions, Energies, 8 (10), pp 12116-12146
42. Emmanuel, O., Othman, M.L., Hizam, H., Rezaei, N., Othman, M.M., 2015, Time-current characteristic curve
prediction for directional overcurrent relays in interconnected network using artificial neural network, ARPN Journal of
Engineering and Applied Sciences, 10 (22), pp 10679-10685
43. Boretti, A., Aris, I., 2015, Regenerative braking of a 2015 LMP1-H Racing Car, SAE Technical Papers, 24 (2659)
44. Peng, G.Z., Radzi, M.A.M., Hizam, H., Wahab, N.I.A., 2015, A Simple Predictive Method of Critical Flicker Detection
for Human Healthy Precaution, Mathematical Problems in Engineering, 2015 (2015), pp 1-10
45. Othman, M.M., Hilmi Harun, M.H., Salim, N.A., Othman, M.L., 2015, Sequential process of feature extraction
methods for artificial neural network in short term load forecasting, ARPN Journal of Engineering and Applied
Sciences, 10 (19), pp 8830-8838
46. Almassri, A.M., Wan Hasan, W.Z., Ahmad, S.A., Ishak, A.J., Ghazali, A.M., Talib, D.N., Wada, C., 2015, Pressure
sensor: State of the art, design, and application for robotic hand, Journal of Sensors, 2015 (2015), pp 1-12
Senarai Penerbitan Tahun 2015 / List of publications in 2015
JABATAN KEJURUTERAAN KIMIA DAN ALAM SEKITAR
1. Rasit, N., Idris, A., Harun, R., Wan Ab Karim Ghani, W.A., 2015, Effects of lipid inhibition on biogas production of
anaerobic digestion from oily effluents and sludges: An overview, Renewable and Sustainable Energy Reviews, 45
(2015), pp 351-358
2. Nami, Y., Haghshenas, B., Abdullah, N., Barzegari, A., Radiah, D., Rosli, R., Khosroushahi, A.Y., 2015, Probiotics or
antibiotics: Future challenges in medicine, Journal of Medical Microbiology, 64 (2), pp 137-146
3. Rahmanian, S., Suraya, A.R., Othman, R.N., Zahari, R., Zainudin, E.S., 2015, Growth of carbon nanotubes on silica
microparticles and their effects on mechanical properties of polypropylene nanocomposites, Materials and Design, 69
(2015), pp 181-189
4. Aljuboori, A.H.R., Idris, A., Al-joubory, H.H.R., Uemura, Y., Ibn Abubakar, B.S.U., 2015, Flocculation behavior and
mechanism of bioflocculant produced by Aspergillus flavus, Journal of Environmental Management, 150 (2015), pp
466-471
5. Saalah, S., Abdullah, L.C., Aung, M.M., Salleh, M.Z., Awang Biak, D.R., Basri, M., Jusoh, E.R., 2015, Waterborne
polyurethane dispersions synthesized from Jatropha oil, Industrial Crops and Products, 64 (2015), pp 194-200
6. Malekbala, M.R., Khan, M.A., Hosseini, S., Abdullah, L.C., Choong, T.S.Y., 2015, Adsorption/desorption of cationic
dye on surfactant modified mesoporous carbon coated monolith: Equilibrium, kinetic and thermodynamic studies,
Journal of Industrial and Engineering Chemistry, 21 (2015), pp 369-377
7. Teoh, Y.P., Khan, M.A., Choong, T.S.Y., Abdullah, L.C., Hosseini, S., 2015, Comparative removal of phenols and its
chlorinated derivatives by carbon-coated monolith: equilibrium, kinetics and regeneration studies, Desalination and
Water Treatment, 54 (2), pp 393-404
8. Abdulsalam, A., Idris, A., A. Mohamed, T., Ahsan, A., 2015, The development and applications of solar pond: a
review, Desalination and Water Treatment, 53 (9), pp 2437-2449
9. Hosseini, S., Marahel, E., Bayesti, I., Abbasi, A., Chuah Abdullah, L., Choong, T.S.Y., 2015, CO2 adsorption on
modified carbon coated monolith: Effect of surface modification by using alkaline solutions, Applied Surface Science,
324 (2015), pp 569-575
10. Bakar, N.A., Chee, C.Y., Abdullah, L.C., Ratnam, C.T., Ibrahim, N.A., 2015, Thermal and dynamic mechanical
properties of grafted Kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites, Materials and Design, 65
(2015), pp 204-211
11. Ramarad, S., Ratnam, C.T., Khalid, M., Chuah, A.L., 2015, Improving the properties of reclaimed waste tire rubber
by blending with poly(ethylene-co-vinyl acetate) and electron beam irradiation, Journal of Applied Polymer Science,
132 (11), pp 1-8
12. Balavandy, S.K., Shameli, K., Abidin, Z.Z., 2015, Rapid and green synthesis of silver nanoparticles via sodium
alginate media, International Journal of Electrochemical Science, 10 (1), pp 486-497
13. Haghshenas, B., Nami, Y., Abdullah, N., Radiah, D., Rosli, R., Barzegari, A., Yari Khosroushahi, A., 2015,
Potentially probiotic acetic acid bacteria isolation and identification from traditional dairies microbiota, International
Journal of Food Science and Technology, 50 (4), pp 1056-1064
14. Rashid, U., Anwar, F., Yunus, R., Al-Muhtaseb, A.H., 2015, Transesterification for biodiesel production using
thespesia populnea seed oil: An optimization study, International Journal of Green Energy, 12 (5), pp 479-484
15. Ghaemi, F., Yunus, R., Mohd Salleh, M.A., Lim, H.N., Rashid, S.A., 2015, Bulk production of high-purity carbon
nanosphere by combination of chemical vapor deposition methods, Fullerenes Nanotubes and Carbon
Nanostructures, 23 (8), pp 669-675
16. Nazaitulshila, R., Idris, A., Harun, R., Wan Azlina, W.A.K.G., 2015, The influence of inoculum to substrate ratio on
the biochemical methane potential of fat, oil, and grease in batch anaerobic assays, Energy Sources, Part A:
Recovery, Utilization and Environmental Effects, 37 (6), pp 590-597
17. Haghshenas, B., Nami, Y., Abdullah, N., Radiah, D., Rosli, R., Khosroushahi, A.Y., 2015, Anticancer impacts of
potentially probiotic acetic acid bacteria isolated from traditional dairy microbiota, LWT - Food Science and
Technology, 60 (2), pp 690-697
Senarai Penerbitan Tahun 2015 / List of publications in 2015
18. Ghaemi, F., Ahmadian, A., Yunus, R., Mohd Salleh, M.A., Senu, N., 2015, Effect of growing graphene flakes on
branched carbon nanofibers based on carbon fiber on mechanical and thermal properties of polypropylene, RSC
Advances, 5 (13), pp 9925-9925
19. Raheem, A., Wan Azlina, W.A.K.G., Taufiq Yap, Y.H., Danquah, M.K., Harun, R., 2015, Thermochemical conversion
of microalgal biomass for biofuel production, Renewable and Sustainable Energy Reviews, 49 (2015), pp 990-999
20. Harun, M.Y., Che Yunus, M.A., Morad, N.A., Ismail, M.H.S., 2015, An industry survey of the screw press system in
palm oil mills: Operational data and malfunction issues, Engineering Failure Analysis, 54 (2015), pp 146-149
21. Zyoud, A., Al-Kerm, R.S., Al-Kerm, R.S., Waseem, M., Mohammed, H.S.H., Park, D., Campet, G., Sabli, N., Hilal,
H.S., 2015, High PEC conversion efficiencies from CuSe film electrodes modified with metalloporphyrin/polyethylene
matrices, Electrochimica Acta, 174 (2015), pp 472-479
22. Z Yoshida, H., Izhar, S., Nishio, E., Utsumi, Y., Kakimori, N., Asghari, F.S., 2015, Recovery of indium from TFT and
CF glasses of LCD wastes using NaOH-enhanced sub-critical water, Journal of Supercritical Fluids, 104 (2015), pp
40-48
23. Tanimu, M.I., Mohd Ghazi, T.I., Harun, M.R., Idris, A., 2015, Effects of feedstock carbon to nitrogen ratio and organic
loading on foaming potential in mesophilic food waste anaerobic digestion, Applied Microbiology and Biotechnology,
99 (2015), pp 4509-4520
24. Amirkhani, H., Yunus, R., Rashid, U., Salleh, S.F., Radhiah, A.B.D., Syam, S., 2015, Low-Temperature Dilute Acid
Hydrolysis of Oil Palm Frond, Chemical Engineering Communications, 202 (9), pp 1235-1244
25. Chang, T.-S., Yunus, R., Rashid, U., Choong, T.S.Y., Biak, D.R.A., Syam, A.M., 2015, Palm oil derived
trimethylolpropane triesters synthetic lubricants and usage in industrial metalworking fluid, Journal of Oleo Science,
64 (2), pp 143-151
26. Sivapragasam, M., Abdullah, N., 2015, Recovery of cyclodextrin glucanotransferase (CGTase) using immobilized
metal chelating affinity chromatography, Brazilian Journal of Chemical Engineering, 32 (1), pp 43-52
27. Hosseini, S., Bayesti, I., Marahel, E., Eghbali Babadi, F., Chuah Abdullah, L., Choong, T.S.Y., 2015, Adsorption of
carbon dioxide using activated carbon impregnated with Cu promoted by zinc, Journal of the Taiwan Institute of
Chemical Engineers, 52 (2015), pp 109-117
28. Abas, S.N.A., Ismail, M.H.S., Siajam, S.I., Kamal, M.L., 2015, Development of novel adsorbent-mangrove-alginate
composite bead (MACB) for removal of Pb(II) from aqueous solution, Journal of the Taiwan Institute of Chemical
Engineers, 50 (2015), pp 182-189
29. Sabiani, N.H.M., Idris, A., Ghani, W.A.W.A.K., Baharuddin, A.S., 2015, The Effect of Ultrasonic Energy on the
Enhancement of the Biodegradability of Food Waste, Energy Sources, Part A: Recovery, Utilization and
Environmental Effects, 37 (13), pp 1397-1405
30. Mohd Farhan, A.R., Pin, K.Y., Zamree, M.S., Luqman Chuah, A., Nazira, M., 2015, Optimisation of solid liquid
extraction of Orthosiphon stamineus leaves using response surface methodology technique, Pertanika Journal of
Tropical Agricultural Science, 38 (2), pp 257-270
31. Goh, H.W., Salmiaton, A., Abdullah, N., Idris, A., 2015, Time, Temperature and Amount of Distilled Water Effectson
the Purity and Yield of Bis(2-Hydroxyethyl) Terephthalate Purification System, Buletin of Chemical Reaction
Engineering and Catalysis, 10 (2), pp 143-154
32. Yeoh, H.S., Choong, T.S.Y., Adzahan, N.M., Rahman, R.A., Chong, G.H., 2015, Solubility of camphene and
caryophyllene oxide in subcritical and supercritical carbon dioxide, Engineering Journal, 19 (4), pp 93-106
33. Rahmanian, S., Suraya, A.R., Roshanravan, B., Othman, R.N., Nasser, A.H., Zahari, R., Zainudin, E.S., 2015, The
influence of multiscale fillers on the rheological and mechanical properties of carbon-nanotube-silica-reinforced epoxy
composite, Materials and Design, 88 (2015), pp 227-235
34. Rowshanaie, O., Mustapha, S., Ahmad, K.A., Rowshanaie, H., 2015, Simulation of organic rankine cycle through
fluegas to large scale electricity generation purpose, Jurnal Teknologi, 77 (27), pp 9-18
35. Chang, J.J., Syafiie, S., Kamil, R., Lim, T.A., 2015, Automation of anaesthesia: a review on multivariable control,
Journal of Clinical Monitoring and Computing, 29 (2), pp 231-239
36. Idris, A.I.M., Salmiaton, A., Omar, R., 2015, Pyrolysis - Solvent extraction of chicken fats and skins for bio-oil
production, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 37 (23), pp 2543-2549
Senarai Penerbitan Tahun 2015 / List of publications in 2015
37. Ahmed, A.M.A., Salmiaton, A., Choong, T.S.Y., Wan Azlina, W.A.K.G., 2015, Review of kinetic and equilibrium
concepts for biomass tar modeling by using Aspen Plus, Renewable and Sustainable Energy Reviews, 52 (2015), pp
1623-1644
38. Hermansson, A.W., Syafiie, S., 2015, Model predictive control of pH neutralization processes: A review, Control
Engineering Practice, 45 (2015), pp 98-109
39. Kania, D., Yunus, R., Omar, R., Abdul Rashid, S., Mohamad Jan, B., 2015, A review of biolubricants in drilling fluids:
Recent research, performance, and applications, Journal of Petroleum Science and Engineering, 135 (2015), pp 117-
184
40. Raheem, A., Sivasangar, S., Wan Azlina, W.A.K.G., Taufiq Yap, Y.H., Danquah, M.K., Harun, R., 2015,
Thermogravimetric study of Chlorella vulgaris for syngas production, Algal Research, 12 (2015), pp 52-59
41. Thiruvenkadam, S., Izhar, S., Yoshida, H., Danquah, M.K., Harun, R., 2015, Process application of Subcritical Water
Extraction (SWE) for algal bio-products and biofuels production, Applied Energy, 154 (2015), pp 815-828
42. Edeseyi, M.E., Kaita, A.Y., Harun, R., Danquah, M.K., Acquah, C., Sia, J.K.M., 2015, Rethinking sustainable biofuel
marketing to titivate commercial interests, Renewable and Sustainable Energy Reviews, 52 (22), pp 781-792
43. Raheem, A., Wan Azlina, W.A.K.G., Taufiq Yap, Y.H., Danquah, M.K., Harun, R., 2015, Optimization of the
microalgae Chlorella vulgaris for syngas production using central composite design, RSC Advances, 5 (88), pp
71805-71815
44. Mohd Salleh, M.A., Nsamba, H.K., Yusuf, H.M., Idris, A., Ghani, W.A.W.A.K., 2015, Effect of Equivalence Ratio
and Particle Size on EFB Char Gasification, Energy Sources, Part A: Recovery, Utilization and Environmental
Effects, 37 (15), pp 1647-1662
45. Danial, R., Abdullaha, L.C., Mobarekeh, M.N., Sobri, S., Adnan, N.M., 2015, A comparison between aluminium and
iron electrodes in electrocoagulation process for glyphosate removal, Jurnal Teknologi, 77 (32), pp 21-26
46. Chua, B.L., Abdullah, Z., Pin, K.Y., Abdullah, L.C., Choong, T.S.Y., Yusof, U.K., 2015, Isolation, structure
elucidation, identification and quantitative analysis of Di(2-ethylhexyl) phthalate (DEHP) from the roots of
Chlorophytum boriviliuanum (Safed Musli), Research Journal of Pharmaceutical, Biological and Chemical Sciences, 6
(5), pp 1090-1095
47. Makama, A.B., Salmiaton, A., Saion, E.B., Choong, T.S.Y., Abdullah, N., 2015, Microwave-Assisted Synthesis of
Porous ZnO/SnS2 Heterojunction and Its Enhanced Photoactivity for Water Purification, Journal of Nanomaterials,
2015 (2015), pp 1-13
48. Muhammad nasir, I., Mohd ghazi, T., 2015, Pretreatment of lignocellulosic biomass from animal manure as a means
of enhancing biogas production, Engineering in Life Sciences, 15 (7)
49. Hosseini, S., Choong, T.S.Y., Abdullah, L.C., Beh, C.L., 2015, Removal of iodide ions from aqueous solution by
electric arc furnace slag, Journal of Engineering Science and Technology, 10 (5), pp 73-81
50. Zhang, X., Ismail, M.H.S., Ahmadun, F.-R.B., Abdullah, N.Bt.Hj., Hee, C, 2015, Hot aerosol fire extinguishing agents
and the associated technologies: A review, Brazilian Journal of Chemical Engineering, 31 (3), pp 707-724
51. Aziz, S., Rashid, S.A., Rahmanian, S., Salleh, M.A., 2015, Experimental evaluation of the interfacial properties of
carbon nanotube coated carbon fiber reinforced hybrid composites, Polymer Composites, 36 (10), pp 1941-1950
52. Dastorian Jamnani, B., Hosseini, S.b, Rahmanian, S., Abdul Rashid, S., Mustapha, S.B., Keshan Balavandy, S.,
2015, Grafting Carbon Nanotubes on Glass Fiber by Dip Coating Technique to Enhance Tensile and Interfacial
Shear Strength, Journal of Nanomaterials, 2015 (2015), pp 1-7
53. Hosseini, S., Janaun, J., Choong, T.S.Y., Keshan Balavandy, S., 2015, Feasibility of honeycomb monolith supported
sugar catalyst to produce biodiesel from palm fatty acid distillate (PFAD), Process Safety and Environmental
Protection, 98 (2015), pp 285-295
54. Abdul Razak, N.N., Abdullah, N., Biak, D.R.A., Mohd Yatim, A.R, 2015, Solvent-less approach for the recovery of
palm-based sophorolipids biosurfactant via salting-out method, Journal of Oil Palm Research, 27 (2), pp 181-189
55. Zahri, N.A.M., amil, S.N.A.M., Abdullah, L.C., Yaw, T.C.S., Mobarekeh, M.N., Huey, S.J., Rapeia, N.S.M., 2015,
Improved method for preparation of amidoxime modified poly(acrylonitrile-co-acrylic acid): Characterizations and
adsorption case study, Polymers, 7 (7), pp 1205-1220
56. Tan, B.K., Ching, Y.C., Poh, S.C., Abdullah, L.C., Gan, S.N., 2015, A review of natural fiber reinforced poly(vinyl
alcohol) based composites: Application and opportunity, Polymers, 7 (11), pp 2205-2222
Senarai Penerbitan Tahun 2015 / List of publications in 2015
57. Arifin, H., Choong, T.S.Y., Rong, C.K., Ahmadun, F.A.-R., Abdullah, L.C, 2015, Forward Osmosis: Temperature
effects by using pome as feed solution, ASEAN Journal of Chemical Engineering, 15 (1), pp 31-40
58. Rapeia, N.S.M., Jamil, S.N.A.M., Abdullah, L.C., Mobarekeh, M.N., Yaw, T.C.S., Huey, S.J., Zahri, N.A.M., 2015,
Preparation and characterization of hydrazine modified poly(Acrylonitrile-co-acrylic acid), Journal of Engineering
Science and Technology, 10 (4), pp 61-70
59. Yusof, S.R.M., Zahri, N.A.M., Koay, Y.S., Nourouzi, M.M., Chuah, L.A., Choong, T.S.Y., 2015, Removal of fluoride
using modified kenaf as adsorbent, Journal of Engineering Science and Technology, 10 (4), pp 11-22
60. Saleem, M.E., Omar, R., Kamal, S.M.M., Biak, D.R.A., 2015, Microwave-assisted pretreatment of lignocellulosic
biomass: A review, Journal of Engineering Science and Technology, 10 (2015), pp 97-109
61. Nurdianah Mustafa, Chai Shuea Lia, Teun Doevendansa, Soh Aik China, Wan Azlina Wan Ab Karim Ghani, 2015,
Fluidised Bed Gasification of Oil Palm Frond (OPF) and Napier Grass (NG): A Preliminary Study, Chemical
Engineering Transactions, 45 (2015), pp 1441-1446
62. Siti Nur Aesyah Abas, Mohd Halim Shah Ismail, Shamsul Izhar Siajam, Mohd Lias Kamal, 2015, Comparative Study
on Adsorption of Pb(II) Ions by Alginate Beads and Mangrove-alginate Composite Beads, Advanced Materials
Research, 1113 (2015), pp 248-254
63. Siti Nur Aesyah Abas, Mohd Halim Shah Ismail, Shamsul Izhar Siajam, Mohd Lias Kamal, 2015, Adsorption of
Pb(II) Ions by using Mangrove-alginate Composite Beads(MACB): Isotherm, Kinetics and Thermodynamics Studies,
Journal of Purity, Utility Reaction and Environment, 4 (3), pp 124-131
64. Ahmad Hafizuddin Zakaria, Mohamad Amran Mohd Salleh, Mohd Halim Shah Ismail and Mustafa Kamal Abdul
Aziz, 2015, Palm Fiber and Nut Separation by Air Classifier System, Journal of Purity, Utility Reaction and
Environment, 4 (3), pp 108-123
65. Suraya Suhaimi Khalis, Zurina Zainal Abidin & Robiah Yunus, 2015, Effect of Ultrasound on the Quality of Crude
Palm Oil-in-water, Asian Journal of Science and Technology, 6 (5), pp 1441-1446
Senarai Penerbitan Tahun 2015 / List of publications in 2015
JABATAN KEJURUTERAAN SISTEM KOMPUTER DAN KOMUNIKASI
1. Ahadi, M., Isa, M.B.M., Iqbal Bin Saripan, M., Hasan, W.Z.W., 2015, Square monopole antenna for microwave
imaging, design and characterisation, IET Microwaves, Antennas and Propagation, 9(1), pp 49-57
2. Kerdegari, H., Mokaram, S., Samsudin, K., Ramli, A.R., 2015, A pervasive neural network based fall detection
system on smart phone, Journal of Ambient Intelligence and Smart Environments, 7(2), pp 221-230
3. Naeem, N., Ismail, A., Alhawari, A.R.H., Mahdi, M.A., 2015, Subwavelength negative index planar terahertz
metamaterial arrays using spiral split ring resonators for near field sensing, International Journal of Applied
Electromagnetics and Mechanics, 47(3), pp 827-836
4. Alqaisy, M., Chakrabraty, C., Ali, J., Alhawari, A.R.H., 2015, A miniature fractal-based dual-mode dual-band
microstrip bandpass filter design, International Journal of Microwave and Wireless Technologies, 7(2), pp 127-133
5. Aziz, A., Lim, H.N., Girei, S.H., Yaacob, M.H., Mahdi, M.A., Huang, N.M., Pandikumar, A., 2015, Silver/graphene
nanocomposite-modified optical fiber sensor platform for ethanol detection in water medium, Sensors and Actuators,
B: Chemical, 206(2015), pp 199-225
6. Abdulwahhab, A.A., Mokhtar, M., Saripan, M.I.B., Abu Bakar, M.H.B., 2015, Integrated framework of feature
selection from microarray data for classification, Journal of Theoretical and Applied Information Technology, 73(2), pp
190-201
7. Mohamad, R., Harun, H., Mokhtar, M., Adnan, W.A.W., Anas, N.M., Dimyati, K., 2015, Choosing the right threshold
for cross-entropy-based stopping criteria, ARPN Journal of Engineering and Applied Sciences, 10(2), pp 613-618
8. Taiwo, A., Taiwo, S., Sahbudin, R.K.Z., Yaacob, M.H., Mokhtar, M., 2015, Collimator-based sensor for remote
vibration monitoring, Microwave and Optical Technology Letters, 57(1), pp 38-41
9. Loh, K.K., Yeo, K.S., Shee, Y.G., Adikan, F.R.M., Mahdi, M.A., 2015, Microwave photonic filter using
multiwavelength brillouin-erbium fiber laser, IEEE Photonics Technology Letters, 27(1), pp 65-68
10. Ahmed, S., Samsudin, K., Ramli, A.R., Rokhani, F.Z., 2015, Advanced Encryption Standard-XTS implementation in
field programmable gate array hardware, Security and Communication Networks, 8(3), pp 516-522
11. Ibrahim, S.A., Rahman, N.A., Abu Bakar, M.H., Girei, S.H., Yaacob, M.H., Ahmad, H., Mahdi, M.A., 2015, Room
temperature ammonia sensing using tapered multimode fiber coated with polyaniline nanofibers, Optics Express,
23(3), pp 2837-2845
12. Musarudin, M., Saripan, M.I., Mashohor, S., Saad, W.H.M., Nordin, A.J., Hashim, S., 2015, Impact of patient weight
on tumor visibility based on human-shaped phantom simulation study in PET imaging system, Radiation Physics and
Chemistry, 115, pp 81-87
13. Farzan, A., Mashohor, S., Ramli, A.R., Mahmud, R., 2015, Boosting diagnosis accuracy of Alzheimer's disease
using high dimensional recognition of longitudinal brain atrophy patterns, Behavioural Brain Research, 290, pp 124-
130
14. Razali, N.F., Abu Bakar, M.H., Tamchek, N., Yaacob, M.H., Latif, A.A., Zakaria, K., Mahdi, M.A., 2015, Fiber Bragg
grating for pressure monitoring of full composite lightweight epoxy sleeve strengthening system for submarine
pipeline, Journal of Natural Gas Science and Engineering, 26, pp 135-141
15. Lim, L.T., Yeo, K.S., Abu Bakar, M.H., Tamchek, N., Mahamd Adikan, F.R., Mahdi, M.A., 2015, Multiwavelength
Hybrid Fiber Raman/Parametric Linear Oscillator, IEEE Photonics Journal, 7(4)
16. Shabaneh, A., Girei, S., Arasu, P., Mahdi, M., Rashid, S., Paiman, S., Yaacob, M., 2015, Dynamic response of
tapered optical multimode fiber coated with carbon nanotubes for ethanol sensing application, Sensors (Switzerland),
15(5), pp 1045-1064
17. Varahram, P., Ali, B.M. 2015, Implementation of a Low Complexity Peak-to-Average Power Ratio Reduction Scheme
on Field Programmable Gate Array, Wireless Personal Communications, 82(3), pp 1863-1875
18. Hisham, H.K., Abas, A.F., Amouzad Mahdiraji, G., Mahdi, M.A., Mahamd Adikan, F.R., 2015, Optimizing the external
optical cavity parameters for performance improvement of a fiber grating Fabry–Perot laser, Optical Review,
22(2015), pp 278-288
19. Sadrolhosseini, A.R., Noor, A.S.M., Mehdipour, L.A., Noura, A., Mahdi, M.A., 2015, Application of thermal lens
technique to measure the thermal diffusivity of biodiesel blend, Optical Review, 22(2015), pp 289-293
Senarai Penerbitan Tahun 2015 / List of publications in 2015
20. Abdulhasan, M.Q., Salman, M.I., Ng, C.K., Noordin, N.K., Hashim, S.J., Hashim, F., 2015, An Adaptive Threshold
Feedback Compression Scheme Based on Channel Quality Indicator (CQI) in Long Term Evolution (LTE) System,
Wireless Personal Communications, 82(4), pp 2323-2349
21. Al-Boeridi, O.N., Syed Ahmad, S.M., Koh, S.P., 2015, A scalable hybrid decision system (HDS) for Roman word
recognition using ANN SVM: study case on Malay word recognition, Neural Computing and Applications, 26(2015),
pp 1505-1513
22. Tanha, M., Hashim, F., Subramaniam, S., 2015, Secure and self-healing control centers of critical infrastructures
using intrusion tolerance, International Journal of Network Security, 17(4), pp 365-382
23. Varahram, P., Ali, B.M., Mohammady, S., Reza, A.W., 2015, Prototype of a peak to average power ratio reduction
scheme in orthogonal frequency division multiplexing systems, KSII Transactions on Internet and Information
Systems, 9(6), pp 2201-2217
24. Nematollahi, M.A., Al-Haddad, S.A.R., Zarafshan, F., 2015, Blind digital speech watermarking based on Eigen-value
quantization in DWT, Journal of King Saud University - Computer and Information Sciences, 27(1), pp 58-67
25. Sahbudin, R.K.Z., Chun, T.T.K., Anas, S.B.A., Hitam, S., Mokhtar, M., 2015, SAC-OCDMA over hybrid FTTx free
space optical communication networks, Journal of Telecommunications and Information Technology, 2015(2), pp 52-
58
26. Salman, M.I., Ng, C.K., Noordin, N.K., Ali, B.M., Sali, A., 2015, A self-configured link adaptation for green LTE
downlink transmission, Transactions on Emerging Telecommunications Technologies, 26(2), pp 258-275
27. Memari, N., Hashim, S.J., Samsudin, K., 2015, Network probe patterns against a honeynet in Malaysia, Defence S
and T Technical Bulletin, 8(1), pp 63-75
28. Al-Dabbagh, M.D., Al-Dabbagh, R.D., Raja Abdullah, R.S.A., Hashim, F., 2015, A new modified differential evolution
algorithm scheme-based linear frequency modulation radar signal de-noising, Engineering Optimization, 47(6), pp
771-787
29. Girei, S.H., Shabaneh, A.A., Ngee-Lim, H., Hamidon, M.N., Mahdi, M.A., Yaacob, M.H., 2015, Tapered Optical
Coated with Graphene based Nanomaterials for Measurement of Ethanol Concentrations in Water, Optical Review,
22(3), pp 385-392
30. Al-Qazwini, Y., Noor, A.S.M., Yaacob, M.H., Harun, S.W., Mahdi, M.A., 2015, Experimental Realization and
Performance Evaluation of Refractive Index SPR Sensor based on Unmasked Short Tapered Multimode-fiber
Operating in Aqueous Environments, Sensors and Actuators, A: Physical, 236(2015), pp 38-43
31. Moghaddasi, M., Mamdoohi, G., Muhammad Noor, A.S., Mahdi, M.A., Ahmad Anas, S.B., 2015, Development of
SAC-OCDMA in FSO with multi-wavelenght Laser Source, Optics Communications, 356(2015), pp 282-289
32. Mustapha, I., Ali, B.M., Rasid, M.F.A., Sali, A., Mohamad, H., 2015, An Energy-efficient Spectrum-aware
Reinforcement Learning-based Clustering Algorithm for Cognitive Radio Sensor Networks, Sensors (Switzerland),
15(8), pp 19783-19818
33. Murtadha, M.K., Noordin, N.K., Ali, B.M., Hashim, F., 2015, Design and Evaluation of Distributed and Dynamic
Mobility Management Approach based on PMIPv6 and MIH Protocols, Wireless Networks, 21(8), pp 2747-2763
34. Girei, S.H., Shabaneh, A.A., Lim, H.M., Mahdi, M.A., Yaacob, M.H., 2015, Absorbance Response of Graphene
Oxide Coated on Tapered Multimode Optical Fiber towards Liquid Ethanol, Journal of the European Optical Society,
10(2015)
35. Murtadha, M.K., Noordin, N.K., Ali, B.M., 2015, Survey and Analysis of Integrating PMIPv6 and MIH Mobility
Management Approaches for Heterogeneous Wireless Networks, Wireless Personal Communications, 82(3)
36. Naeem, N., Ismail, A., Alhawari, A.R.H., Mahdi, M.A., 2015, Terahertz dielectric sensor based on novel hexagon
meta-atom cluster, Aoolied Computational Electromagnetics Society Journal, 30(9), pp 996-1002
37. Hussein, Y.S., Ali, B.M., Rasid, M.F., Sali, A., 2015, Handover in LTE networks with proactive multiple preparation
approach and adaptive parameters using fuzzy logic control, KSII Transactions on Internet and Information Systems,
9(7), pp 2389-2413
38. Al-Qazwini, Y., Noor, A.S.M., Yaacob, M.H., Harun, S.W., Mahdi, M.A., 2015, Fabrication and characterization of a
refractive index sensor based on SPR in an etched plastic optical fiber, Procedia Engineering, 120(2015), pp 969-974
Senarai Penerbitan Tahun 2015 / List of publications in 2015
39. Mohamad, H., Abu Bakar, M.H., Mahdi, M.A., 2015, Dispersion variation in ring-type erbium-doped fiber ultrashort
pulse laser with single-wall carbon nanotube-based tapered fiber saturable absorber, Microwave and Optical
Technology Letters, 57(10), pp 2374-2376
40. Ali, N.H., Ali, B.M., Basir, O., Othman, M.L., Hashim, F., 2015, IEC 61850-based wlan peer-to-peer feeder
protection improvement in smart grid substation automation system, Journal of Theoretical and Applied Information
Technology, 80(3), pp 510-520
41. Ahadi, M., Isa, M., Saripan, M.I., Hasan, W.Z.W., 2015, Three dimensions localization of tumors in confocal
microwave imaging for breast cancer detection, Microwave and Optical Technology Letters, 57(12), pp 2917-2929
42. Arigbabu, O.A., Ahmad, S.M.S., Adnan, W.A.W., Yussof, S., 2015, Integration of multiple soft biometrics for human
identification, Pattern Recognition Letters, 68(2015), pp 278-287
43. Al-Ghaili, A.M., Samsudin, K., Saripan, M.I., Adnan, W.A.W., 2015, A fast cellular automata algorithm for liquid
diffusion phenomenon modeling , Evolving Systems, 6(4), pp 229-241
44. Nematollahi, M.A., Akhaee, M.A., Al-Haddad, S.A.R., Gamboa-Rosales, H., 2015, Semi-fragile digital speech
watermarking for online speaker recognition, Eurasip Journal on Audio, Speech, and Music Processing, 2015(2015),
pp 1-15
45. Hesamian, M.H. , Mashohor, S., Saripan, M.I., Wan Adnan, W.A., 2015, Effect of image resolution on intensity
based scene illumination classification using neural network, Imaging Science Journal, 63(8), pp 433-439
46. Mokri, S.S., Saripan, M.I., Marhaban, M.H., Nordin, A.J., Hashim, S., 2015, Hybrid registration of PET/CT in
thoracic region with pre-filtering PET sonogram, Radiation Physics and Chemistry, 116(2015), pp 300-304
47. Mamdoohi, G., Sarmani, A. R., Abu Bakar, M. H., Mahdi, M. A., 2015, Effects of Raman pump power distribution
on output spectrum in a multi-wavelength BRFL, Optics Express, 23(20), pp 25570-25581
48. Sonee Shargh, R., Ahmad Hambali, N.A.M., Ajiya, M., Mahdi, M.A., 2015, Effect of large effective area fiber length
on the performance of forward-backward scattering combination multiwavelength Brillouin-Raman fiber laser, Journal
of Optics (United Kingdom), 17(10)
49. Yip, M., Saripan, M.I., Wells, K., Bradley, D.A., 2015, Monte Carlo simulations for the detection of buried objects
using single sided backscattered radiation, PLoS ONE, 10(9), pp 1-18
50. Sajjadi Torshizi, S.D., Hashim, F., Kwong, K.H., Chieng, D., Ng, S.C., Tanha, M., 2015, An Adaptive Rate
Allocation System to Mitigate Starvation Dilemma in Multi-Radio Multi-Hop Wireless Mesh Networks, Wireless
Personal Communications, 84(4), pp 2881-2912
51. Arigbabu, O.A., Ahmad, S.M.S., Adnan, W.A.W., Yussof, S., 2015, Recent advances in facial soft biometrics,
Visual Computer, 31(5), pp 513-525
52. Zarrabi, A., Samsudin, K., Karuppiah, E.K., 2015, Gravitational search algorithm using CUDA: a case study in high-
performance metaheuristics, Journal of Supercomputing, 71(4), pp 1277-1296
53. Adnan, W.A.W., Mohamad, R.T., Kareem, S.A., Zulkefle, A.A., Salahudin, M.T., Kamalrudin, M., 2015, Digital
Watermarking : Framework for mathematical modelling, International Journal of Applied Engineering Research,
10(17), pp 38468-38469
54. Al-Jumaily, A.H.J., Sali, A., Mandeep, J.S., Ismail, A., 2015, Propagation measurement on earth-sky signal effects
for high speed train satellite channel in tropical region at Ku-band, International Journal of Antennas and
Propagation, 2015(2015), pp 1-10
55. Nematollahi, M.A., Gamboa-Rosales, H., Akhaee, M.A., Al-Haddad, S.A.R. , 2015, Robust Digital Speech
Watermarking for Online Speaker Recognition, Mathematical Problems in Engineering, 2015(2015), pp 1 -12
56. Mwinyi, A.K., Al-Haddad, S.A.R., Hashim, S.J., Abdullah, R., Aldibayeva, L., 2015, A model of online assessment
and teaching monitoring for learning management system to improve learning cognitive skills, Advanced Science
Letters, 21(7), pp 2215-2220
57. Arigbabu, O.A., Ahmad, S.M.S., Adnan, W.A.W., Yussof, S., Mahmood, S, 2015, Soft biometrics: Gender
recognition from unconstrained face images using local feature descriptor, Journal of Information and Communication
Technology, 14(1), pp 111-122
58. Mohamad, R., Harun, H., Mokhtar, M., Adnan, W.A.W., Dimyati, K., 2015, Robust stopping criterion in signal-to-
noise ratio uncertainty environment, Electronics Letters, 51(23), pp 1875-1877
Senarai Penerbitan Tahun 2015 / List of publications in 2015
59. Touati, F., Erdene-Ochir, O., Mehmood, W., Hassan, A., Mnaouer, A.B., Gaabab, B., Rasid, M.F.A., Khriji, L.,
2015, An experimental performance evaluation and compatibility study of the bluetooth low energy based platform for
ECG monitoring in WBANs, International Journal of Distributed Sensor Networks, 2015(2015), pp 1-12
60. Ghassan, J.K., Mohamad, R.T., Abdulzahra, A.A., Ali, K.S., Saif, T.H., Hadi, F.H., Ahmed, D.S., Zulkefle, A.A.,
Ab Ghani, M.R., Omar, R., Sulaiman, M., Adnan, W.A.W., 2015, Modeling water treatment plant with high
efficiency motors (HEMs), International Journal of Applied Engineering Research, 10(17), pp 38498-38499
61. Shareef, W.Z., Ismail, A., Alhawari, A.R.H., 2015, Substrate-perforated and compact ultra-wideband antenna with
WLAN band rejection, International Journal of Microwave and Wireless Technologies, 7(5), pp 543-550
62. Parveen, S., Syed Ahmad, S.M., Hanafi, M., Wan Adnan, W.A., 2015, Face anti-spoofing methods, Current
Science, 108(8), pp 1491-1500
63. Al-Saegh, A.M., Sali, A., Mandeep, J.S., Ismail, A., 2015, Tracking- and scintillation-aware channel model for GEO
satellite to land mobile terminals at Ku-band, International Journal of Antennas and Propagation, 2015(2015), pp 1-15
64. Hejazi, M., Al-Haddad, S.A.R., Singh, Y.P., Hashim, S.J., Aziz, A.F.A., 2015, Multiclass Support Vector Machines
for Classification of ECG Data with Missing Values, Applied Artificial Intelligence, 29(7), pp 660-674
65. Al-Azzo, W.F., Ali, B.M., Khatun, S., Mohammed, T.S., 2015, Tone reservation based on fourier transformed
sequence for PAPR reduction in OFDM systems, Engineering Letters, 23(4), pp 239-244
66. Mohamad, R.T., Zulkefle, A.A., Baharudin, Z.A., Abdul Rahman, A.I., Zainon, M., Mat Hanafiah, M.A., Salim,
S.N.S., Abu Shah, I., Ibrahim, M., Adnan, H., Amran, A.C., Ibrahim, I.M., Abdullah, L., Aman, O., Raja Abd
Rahman, R.R., Adnan, W.A., 2015, Effect of temperature on 1 micron thick silicon solar cell, International Journal of
Applied Engineering Research, 10(11), pp 29127-29133
67. Abdulzahra, A.A., Mohamad, R.T., Ghassan, J.K., Ali, K.S., Saif, T.H., Hadi, F.H., Ahmed, D.S., Shahril, S.H.M.,
Zulkefle, A.A., Omar, R., Adnan, W.A.W., 2015, Harmonic distortion control technique in adjustable speed drives,
International Journal of Applied Engineering Research, 10(17), pp 38500-38503
Senarai Penerbitan Tahun 2015 / List of publications in 2015
JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
1. Zulkefli, Z.A., Adams, M.L., 2015, Mitigation of Gear Mesh-Frequency Noise Using a Hydrostatic Bearing, Journal of
Vibration and Acoustics (Transactions of the ASME), 137(3), pp 1-4
2. Shahmohammadi, M.S., Mohd. Yusuff, R., Keyhanian, S., Shakouri G.H., Hamed, 2015, A decision support system
for evaluating effects of Feed-in Tariff mechanism: Dynamic modeling of Malaysia's electricity generation mix,
Applied Energy, 146(2015), pp 217-229
3. AL-Oqla, F.M., Sapuan, S.M., Ishak, M.R., Nuraini, A.A., 2015, Predicting the potential of agro waste fibers for
sustainable automotive industry using a decision making model, Computers and Electronics in Agriculture,
113(2015), pp 116-127
4. Al-Oqla, F.M., Salit, M.S., Ishak, M.R., Aziz, N.A., 2015, Selecting natural fibers for bio-based materials with
conflicting criteria, American Journal of Applied Sciences, 12(1), pp 64-71
5. Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S., 2015, Effect of layering sequence and chemical
treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites, Materials and Design,
67(2015), pp 173-179
6. Muhieldeen, M.W., Adam, N.M., Salman, B.H., 2015, Experimental and numerical studies of reducing cooling load of
lecture hall, Energy and Buildings, 89(2015), pp 163-169
7. Misri, S., Sapuan, S.M., Leman, Z., Ishak, M.R., 2015, Torsional behaviour of filament wound kenaf yarn fibre
reinforced unsaturated polyester composite hollow shafts, Materials and Design, 65, pp 953-960
8. Dawood, S.D.S., Inayatullah, O.B., Samin, R.B., 2015, Computational study of the effect of using open isogrids on
the natural frequencies of a small satellite structure, Acta Astronautica, 106(2015), pp 120-138
9. Al-Oqla, F.M., Salit, M.S., Ishak, M.R., Aziz, N.A., 2015, A novel evaluation tool for enhancing the selection of natural
fibers for polymeric composites based on fiber moisture content criterion, BioResources, 10(1), pp 299-312
10. AL-Oqla, F.M., Sapuan, S.M., Ishak, M.R., Nuraini, A.A., 2015, Decision making model for optimal reinforcement
condition of natural fiber composites, Fibers and Polymers, 16(1), pp 153-163
11. Razali, N., Salit, M.S., Jawaid, M., Ishak, M.R., Lazim, Y., 2015, A study on chemical composition, physical, tensile,
morphological, and thermal properties of roselle fibre: Effect of fibre maturity, BioResources, 10(1), pp 1803-1824
12. Paslar, S., Ariffin, M.K.A., Tamjidy, M., Hong, T.S., 2015, Biogeography-based optimisation for flexible
manufacturing system scheduling problem, International Journal of Production Research, 53(9), pp 2690-2706
13. Tamjidy, M., Paslar, S., Baharudin, B.T.H.T., Hong, T.S., Ariffin, M.K.A., 2015, Biogeography based optimization
(BBO) algorithm to minimise non-productive time during hole-making process, International Journal of Production
Research, 53(6), pp 1880-1894
14. Alimoradi, A., Yussuf, R.M., Ismail, N.B., Zulkifli, N., 2015, Developing a fuzzy linear programming model for locating
recovery facility in a closed loop supply chain, International Journal of Sustainable Engineering, 8(2), pp 122-137
15. Ghobakhloo, M., Hong, T.S., 2015, The business value of information system-enabled E-collaboration capabilities,
International Journal of e-Collaboration, 11(1), pp 22-56
16. Ahmad, M.B., Gharayebi, Y., Salit, M.S., Hussein, M.Z., Shameli, K., Dehzangi, A., Jahangirian, H.,
Abdolmohammadi, S., Behzad, K., 2015, Effect of SiO2 particles on dispersion of montmorillonite (MMT) in polyimide
nanocomposite during thermal imidization, Research on Chemical Intermediates, 41(3), pp 1657-1671
17. Ghobakhloo, M., Hong, T.S., Standing, C., 2015, B2B E-commerce success among small and medium-sized
enterprises: A business network perspective, Journal of Organizational and End User Computing, 27(1), pp 1-32
18. Muhd Ridzuan Mansor, Mohd Sapuan Salit, Edi Syams Zainudin, Nuraini Abd Aziz, Hambali Arep & Mohd Fuad
Alias, 2015, A Simplified Life Cycle Analysis of an Automotive Parking Brake Lever using Polymer Composites,
Applied Mechanics and Materials, 699(2015), pp 395-400
19. Nemati, J., Majzoobi, G.H., Sulaiman, S., Baharudin, B.T.H.T., Azmah Hanim, M.A., 2015, Effect of equal channel
angular extrusion on Al-6063 bending fatigue characteristics, International Journal of Minerals, Metallurgy and
Materials, 22(4), pp 395-404
20. Fatchurrohman, N., Sulaiman, S., Sapuan, S.M., Ariffin, M.K.A., Baharuddin, B.T.H.T., 2015, Analysis of a metal
matrix composites automotive component, International Journal of Automotive and Mechanical Engineering, 11(1),
pp 2531-2540
Senarai Penerbitan Tahun 2015 / List of publications in 2015
21. Azaman, M.D., Sapuan, S.M., Sulaiman, S., Zainudin, E.S., Khalina, A., 2015, Optimization and numerical simulation
analysis for molded thin-walled parts fabricated using wood-filled polypropylene composites via plastic injection
molding, Polymer Engineering and Science, 55(5), pp 1082-1095
22. Delgoshaei, A., Ariffin, M.K.M., Baharudin, B.T.H.T.B., Leman, Z., 2015, Minimizing Makespan of a resource-
constrained scheduling problem: A hybrid greedy and genetic algorithms, International Journal of Industrial
Engineering Computations, 6(4), pp 503-520
23. AL-Oqla, F.M., Sapuan, S.M., Ishak, M.R., Nuraini, A.A., 2015, A Model for Evaluating and Determining the Most
Appropriate Polymer Matrix Type for Natural Fiber Composites, International Journal of Polymer Analysis and
Characterization, 20(3), pp 191-205
24. Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S., 2015, Effects of kenaf contents and fiber
orientation on physical, mechanical, and morphological properties of hybrid laminated composites for vehicle spall
liners, Polymer Composites, 36(8), pp 1469-1476
25. T.T Dele-Afolabi, M.A. Azmah Hanim, M. Norkhairunnisa, H.M. Yusoff, 2015, Investigating the Effect of Isothermal
Aging on the Morphology and Shear Strenght of Sn-5Sb Solder Reinforced with Carbon Nanotubes, Journal of Alloy
and Compounds, 649(2015), pp 368-374
26. Rosmamuhamadani Ramli, Shamsuddin Sulaiman, Mohd Idris Sgah Ismail, Azmah Hanim Mohamed Arif, Mahesh
Kumar Talari, 2015, Wear Properties of Metal Matrix Composite Al-Cu and Al-Cu-TiB2, Materials Science Forum,
819(2015), pp 268-273
27. Salwani, M.S., Sahari, B.B., Ali, A., Nuraini, A.A., 2015, Assessment of head injury criteria and chest severity index
for frontal impact, Journal of Mechanical Engineering and Sciences, 8(2015), pp 1376-1382
28. Misri, S., Ishak, M.R., Sapuan, S.M., Leman, Z., 2015, The effect of winding angles on crushing behavior of filament
wound hollow kenaf yarn fibre reinforced unsaturated polyester composites, Fibers and Polymers, 16(10), pp 2266-
2275
29. Toozandehjani, M., Mustapha, F., Zahari, N.I., Ariffin, M.K.A. , Matori, K.A., Ostovan, F., Lim, W.F. , 2015,
Characterization of Aging Behavior of AA6061 Aluminum Alloy Through Destructive and Ultrasonic Non-destructive
Testing Techniques, Transactions of the Indian Institute of Metals, 68(4), pp 561-569
30. Dele-Afolabi, T.T., Azmah Hanim, M.A., Norkhairunnisa, M., Yusoff, H.M., Suraya, M.T. , 2015, Growth kinetics of
intermetallic layer in lead-free Sn–5Sb solder reinforced with multi-walled carbon nanotubes, Journal of Materials
Science: Materials in Electronics, 26(10), pp 8249-8259
31. Nadlene, R., Sapuan, S.M., Jawaid, M., Ishak, M.R., Yusriah, L., 2015, Material characterization of roselle fibre
(Hibiscus sabdariffa L.) as potential reinforcement material for polymer composites, Fibres and Textiles in Eastern
Europe, 23(6), pp 23-30
32. Azaman, M.D., Sapuan, S.M., Sulaiman, S., Zainudin, E.S., Khalina, A.d, 2015, Numerical Simulation Analysis of
Unfilled and Filled Reinforced Polypropylene on Thin-walled Parts Formed using the Injection-moulding Process,
International Journal of Polymer Science, 2015(2015), pp 1-8
33. Suhad D. Salman, Mohaiman J. Sharba, Z. Leman, M. T. H. Sultan, M. R. Ishak, and F. Cardona, 2015, Physical,
Mechanical and Morphological Properties of Woven Kenaf/Polymer Composites Produced using a Vacuum Infusion
Technique, International Journal of Polymer Science, 2015(2015), pp 1-10
34. Umar, U.A. , Ariffin, M.K.A., Ismail, N., Tang, S.H., 2015, Hybrid multiobjective genetic algorithms for integrated
dynamic scheduling and routing of jobs and automated-guided vehicle (AGV) in flexible manufacturing systems
(FMS) environment, International Journal of Advanced Manufacturing Technology, 81(9-12), pp 2123-2141
35. Fairuz, A.M., Sapuan, S.M., Zainudin, E.S., Jaafar, C.N.A., 2015, The effect of gelation and curing temperatures
on mechanical properties of pultruded kenaf fibre reinforced vinyl ester composites, Fibers and Polymers, 16(12), pp
2645-2651
36. Hozoorbakhsh, A. , Ismail, M.I.S., Aziz, N.B.A., 2015, A computational analysis of heat transfer and fluid flow in
high-speed scanning of laser micro-welding, International Communications in Heat and Mass Transfer, 68(2015), pp
178-187
37. Rodney, J., Sahari, J., Mohd Kamal, M.S., Sapuan, S.M., 2015, Thermochemical and mechanical properties of tea
tree (Melaleuca alternifolia) fibre reinforced tapioca starch composites , E-Polymers, 15(6), pp 401-409
Senarai Penerbitan Tahun 2015 / List of publications in 2015
38. AL-Oqla, F.M., Sapuan, S.M., 2015, Polymer Selection Approach for Commonly and Uncommonly Used Natural
Fibers Under Uncertainty Environments, JOM, 67(10), pp 2450-2463
39. Yusoff, W.F.M., Sapian, A.R., Salleh, E., Adam, N.M., Johar, S., 2015, Application of solar-induced ventilation
prototype in small and medium enterprise building, Indoor and Built Environment, 24(3), pp 384-400
40. Al-Oqla, F.M., Sapuan, S.M., Anwer, T., Jawaid, M., Hoque, M.E., 2015, Natural fiber reinforced conductive
polymer composites as functional materials: A review, Synthetic Metals, 206(2015), pp 42-54
41. Abdullah, A.B., Sapuan, S.M., Samad, Z., 2015, Roundness error evaluation of cold embossed hole based on
profile measurement technique, International Journal of Advanced Manufacturing Technology, 80(1-4), pp 293-300
42. Haniffah, W.H., Sapuan, S.M., Abdan, K., Khalid, M., Hasan, M., Hoque, M.E., 2015, Kenaf Fibre Reinforced
Polypropylene Composites: Effect of Cyclic Immersion on Tensile Properties, International Journal of Polymer
Science, 2015(2015), pp 1-6
43. Julkapli, N.M., Bagheri, S., Sapuan, S.M., 2015, Multifunctionalized carbon nanotubes polymer composites:
Properties and applications, Advanced Structured Materials, 75(2015), pp 155-214
44. Mojtaba Zabihinpour, S. , Ariffin, M.K.A., Tang, S.H., Azfanizam, A.S., 2015, Construction of fuzzy ¯X-S control
charts with an unbiased estimation of standard deviation for a triangular fuzzy random variable, Journal of Intelligent
and Fuzzy Systems, 28(6), pp 2735-2747
45. Ghobakhloo, M., Tang, S.H., 2015, Information system success among manufacturing SMEs: case of developing
countries, Information Technology for Development, 21(4), pp 573-600
46. Masuri, S., Tamma, K.K., 2015, The selective control feature for physically accurate solutions of all variables and
application in first order linear transient hyperbolic systems, CMES - Computer Modeling in Engineering and
Sciences, 106(3), pp 147-168
47. Gholizadeh, S. , Lemana, Z. , Baharudinb, B.T.H.T., 2015, A review of the application of acoustic emission
technique in engineering, Structural Engineering and Mechanics, 54(6), pp 1075-1095
48. Shahril, A., Samin, R., Juraidi, J.M., Daut, J., 2015, Structural analysis of brake disc using dynamic simulation,
ARPN Journal of Engineering and Applied Sciences, 10(17), pp 7805-7808
49. Azali A, Sapuan SM, Rahman SA, Adam NM, Hasan M & Enamul Hoque M, 2015, Temperature Profile of Produced
Gas in Oil Palm Biomass Fluidized Bed Gasifier: Effect of Fibre/Shell Composition Ratio, Journal of Bioprocessing &
Biotechniques, 5(8), pp 1-6
Senarai Penerbitan Tahun 2015 / List of publications in 2015
JABATAN KEJURUTERAAN PROSES DAN MAKANAN
1. Tan, M.C., Chin, N.L., Yusof, Y.A., Taip, F.S., Abdullah, J., 2015, Characterisation of improved foam aeration and
rheological properties of ultrasonically treated whey protein suspension, International Dairy Journal, 43(2015), pp 7-
14
2. Shahapuzi, N.S., Taip, F.S., Ab Aziz, N., Ahmedov, A., 2015, Effect of oven temperature profile and different baking
conditions on final cake quality, International Journal of Food Science and Technology, 50(2015), pp 723-729
3. Mohd Rozalli, N.H., Chin, N.L., Yusof, Y.A., 2015, Grinding characteristics of Asian originated peanuts
(Arachishypogaea L.) and specific energy consumption during ultra-high speed grinding for natural peanut butter
production, Journal of Food Engineering, 152(2015), pp 1-7
4. Mohamad, N.L., Mustapa Kamal, S.M., Mokhtar, M.N., 2015, Xylitol Biological Production: A Review of Recent
Studies, Food Reviews International, 31(1), pp 74-89
5. Mohd Hanim, A.B., Chin, N.L., Yusof, Y.A., 2015, Rheological characterisation of malaysian varieties of sweet potato
doughs using large and small deformation measurements, International Journal of Food Properties, 18(5), pp 963-
977
6. Shah, N.N.A.K., Rahman, R.A., Hashim, D.M., 2015, Changes in physicochemical characteristics of ozone-treated
raw white rice, Journal of Food Science and Technology, 52(3), pp 1525-1533
7. Mior Ahmad Khusairi Mohd Zahari, Hidayah Ariffin, Mohd Noriznan Mokhtar, Jailani Salihon, Yoshihito Shirai, Mohd
Ali Hassan, 2015, Case study for a palm biomass biorefinery utilizing renewable non-food sugars from oil palm frond
for the production of poly(3-hydroxybutyrate) bioplastic, Journal of Cleaner Production, 87(2015), pp 284-290
8. Farah Nadia, O., Xiang, L.Y., Lie, L.Y., Chairil Anuar, D., Mohd Afandi, M.P., Azhari Baharuddin, S., 2015,
Investigation of physico-chemical properties and microbial community during poultry manure co-composting process,
Journal of Environmental Sciences (China), 28(2015), pp 81-94
9. Yunos, N.S.H.M., Baharuddin, A.S., Md Yunos, K.F., Hafid, H.S., Busu, Z., Mokhtar, M.N., Sulaiman, A., Som, A.M.,
2015, The physicochemical characteristics of residual oil and fibers from oil palm empty fruit bunches, BioResources,
10(1), pp 14-29
10. Zakaria, M.R., Hirata, S., Hassan, M.A., 2015, Hydrothermal pretreatment enhanced enzymatic hydrolysis and
glucose production from oil palm biomass, Bioresource Technology, 176(2015), pp 142-148
11. Ali, A.A.M., Othman, M.R., Shirai, Y., Hassan, M.A., 2015, Sustainable and integrated palm oil biorefinery concept
with value-addition of biomass and zero emission system, Journal of Cleaner Production, 91(2015), pp 96-99
12. Abdullah, S.S.S., Shirai, Y., Bahrin, E.K., Hassan, M.A., 2015, Fresh oil palm frond juice as a renewable, non-food,
non-cellulosic and complete medium for direct bioethanol production, Industrial Crops and Products, 63(2015), pp
357-361
13. Safwan Sulaiman, Mohd Noriznan Mokhtar, Mohd Nazli Naim, Azhari Samsu Baharuddin, Alawi Sulaiman, 2015, A
Review: Potential Usage of Cellulose Nanofibers (CNF) for Enzyme Immobilization via Covalent Interactions, Applied
Biochemistry and Biotechnology, 175 (2015), pp 1817-1842
14. M. Nazli Naim, Atiqah Raihan Jaafar, Noor Fitrah Abu Bakar, Azhari Samsu Baharuddin, Roseliza Kadir Basha, I.
Wuled Lenggoro, 2015, Deposition of nanostructures derived from electrostatically stabilised TiO2 aqueous
suspension onto a biocomposite, Advanced Powder Technology, 26 (2015), pp 362-367
15. Nur Salihah, B., Rosnah, S. and Norashikin, A. A., 2015, Mass modeling of Malaysian varieties Pomelo fruit (Citrus
Grandis L. Osbeck) with some physical characteristics, International Food Research Journal, 22 (2), pp 488-493
16. Taufiq, A. M., Yusof, Y. A., Chin, N. L., Siti, H. O., Serikbaeva, A. and Aziz, M. G., 2015, Physicochemical properties
of tamarind and pineapple fruit pulps and powders, International Food Research Journal, 22 (2), pp 702-712
17. Syahidah, K., Rosnah, S., Noranizan, M.A., Zaulia, O. and Anvarjon, A., 2015, Quality changes of fresh cut
cantaloupe (Cucumis melo L. var Reticulatus cv. Glamour) in different types of polypropylene packaging,
International Food Research Journal, 22 (2), pp 753-760
18. Roslan, J., Mustapa Kamal, S. M., Md. Yunos, K. F. and Abdullah, N., 2015, Optimization of enzymatic hydrolysis of
tilapia (Oreochromis niloticus) by-product using response surface methodology, International Food Research Journal,
22 (3), pp 1117-1123
Senarai Penerbitan Tahun 2015 / List of publications in 2015
19. N. H. Mohd Rozalli, N. L. Chin & Y. A. Yusof, 2015, Particle Size Distribution of Natural Peanut Butter and Its
Dynamic Rheological Properties, International Journal of Food Properties, 18 (2015), pp 1888-1894
20. F.S. Mohd Salleh, Y.A. Yusof, M.S. Anuar, N.L. Chin, 2015, Understanding the Tabletting Characteristics of Ficus
Deltoidea Powder by Fitting into Compression Models, Journal of Food Process Engineering, 38 (2015), pp 250-261
21. M. C. Tan, N. L. Chin, Y. A. Yusof, F. S. Taip, J. Abdullah, 2015, Improvement of Eggless Cake Structure Using
Ultrasonically Treated Whey Protein, Food and Bioprocess Technology, 8 (2015), pp 605-614
22. M.S.H. Sarker, M.N. Ibrahim, N. Ab. Aziz, M.S. Punan, 2015, Application of simulation in determining suitable
operating parameters for industrial scale fluidized bed dryer during drying of high impurity moist paddy, Journal of
Stored Products Research, 61 (2015), pp 76-84
23. Md. Sazzat Hossain Sarker, Mohd Nordin Ibrahim, Norashikin Abdul Aziz, Mohd Salleh Punan, 2015, Energy and
exergy analysis of industrial fluidized bed drying of paddy, Energy, 84 (2015), pp 131-138
24. Ibrahim M.N., Sarker M.S.H., Ab. Aziz N., Mohd Salleh P., 2015, Drying Performances and Milling Quality of Rice
during Industrial Fluidized Bed Drying of Paddy in Malaysia, Pertanika Journal of Science & Technology, 23 (2), pp 1-
12
25. Sara Koohikamali, Siti Mazlina Mustapa Kamal, 2015, Enhanced oxidative stability and water miscibility of
conjugated linoleic acid complexed with lysine and arginine, European Journal of Lipid Science and Technology, 117
(2015), pp 637-645
26. Loo Yu Xiang, Suhaiza Hanim Hanipah, Mohd Afandi P. Mohammed, Azhari Samsu Baharuddin, Azwan Mat Lazim,
2015, Microstructural, Mechanical, and Physicochemical Behaviours of Alkali Pre-treated Oil Palm Stalk Fibres,
Bioresources, 10 (2), pp 2783-2796
27. Siti Hajar Othman, Suraya Abdul Rashid, Tinia Idaty Mohd. Ghazi, and Norhafizah Abdullah, 2015, 3D CFD
Simulations: Effect of Operation Parameters on the Deposition of Photocatalytic TiO2 Nanoparticles by MOCVD,
Chemical Vapor Deposition, 21 (2015), pp 99-110
28. Ahmad Farhad Talebi, Masoud Tohidfar, Seyedeh Mahsa Mousavi Derazmahalleh, Alawi Sulaiman, Azhari Samsu
Baharuddin, and Meisam Tabatabaei, 2015, Biochemical Modulation of Lipid Pathway in Microalgae Dunaliella sp.
for Biodiesel Production, BioMed Research International, 2015
29. Mohd Sharif, S., Abu Bakar, N.F., Naim, M., 2015, Deposition of fine iron oxide particles in tap water using
electrophoretic deposition (EPD) technique, Journal of Water Process Engineering, 7 (2015), pp 123-130
30. Salleh, L.M., Abel, S.E.R., Zahedi, G., Rahman, R.A., Nasir, H.M., Faua'ad, S.A.S., 2015, Optimization of
supercritical carbon dioxide extraction of quercus infectoria oil, Jurnal Teknologi, 74 (7), pp 79-86
31. Shahapuzi, N.S., Taip, F.S., Ab. Aziz, N., Ahmedov, A., 2015, The effects of airflow on oven temperatures and cakes
qualities, Pertanika Journal of Science and Technology, 23 (2), pp 339-350
32. Liew, S.Q., Chin, N.L., Yusof, Y.A., Cheok, C.Y., 2015, Citric acid extraction of pectin from tropical fruit peels of
passion fruit, dragon fruit and soursop, Journal of Food, Agriculture and Environment, 13 (2), pp 45-51
33. Husam Hameed, H., Eshkuvatov, Z.K., Ahmedov, A., Nik Long, N.M.A., 2015, On Newton-kantorovich method for
solving the nonlinear operator equation, Abstract and Applied Analysis, 2015 (2015), pp 1-12
34. Chavarro Gomez, J., Mokhtar, M.N., Sulaiman, A., Samsu Baharuddin, A., Busu, Z., 2015, Recovery of Residual
Crude Palm Oil from the Empty Fruit Bunch Spikelets Using Environmentally Friendly Processes, Separation Science
and Technology (Philadelphia), 50 (11), pp 1677-1683
35. Idris, J., Shirai, Y., Anduo, Y., Ali, A.A.M., Othman, M.R., Ibrahim, I., Husen, R., Hassan, M.A., 2015, Improved yield
and higher heating value of biochar from oil palm biomass at low retention time under self-sustained carbonization,
Journal of Cleaner Production, 104 (2015), pp 475-479
36. Gomez, J.C., Mokhtar, M.N., Sulaiman, A., Zakaria, R., Baharuddin, A.S., Busu, Z., 2015, Study on Residual Oil
Recovery from Empty Fruit Bunch by Combination of Water and Steam Process, Journal of Food Process
Engineering, 38 (4), pp 385-394
37. Sarker, M.S.H., Ibrahim, M.N., Aziz, N.A., Punan, M.S., 2015, Overall Energy Requisite and Quality Feature of
Industrial Paddy Drying, Drying Technology, 33 (11), pp 1360-1368
38. Bo Yuan Lim, Rosnah Shamsudin, B.T. Hang Tuah Baharudin, Robiah Yunus, 2015, A review of processing and
machinery for Jatropha curcas L. fruits and seeds in biodiesel production: Harvesting, shelling, pretreatment and
storage, Renewable and Sustainable Energy Reviews, 52 (2015), pp 991-1002
Senarai Penerbitan Tahun 2015 / List of publications in 2015
39. Nor, M.Z.M., Talib, R.A., Noranizan, M.A. , Chin, N.L., Hashim, K, 2015, Effects of cooking temperature in repetitive
cooking-chilling cycles on resistant starch content and quality characteristics of fish crackers, Pertanika Journal of
Science and Technology, 23 (2), pp 311-323
40. Anvarjon Ahmedov, Ahmad Fadly Nurullah Rasedee, 2015, On the weak localization principle of the eigenfunction
expansions of the laplace-beltrami operator by Riesz Method, Malaysian Journal of Mathematical Sciences, 9 (2), pp
337-348
41. Nurul Izzah Khalid, Norbismi Nordin, Nuraini Abdul Aziz, Norashikin Ab. Aziz, Farah Saleena Taip, Mohd. Shamsul
Anuar, 2015, Design of a Test Rig for Cleaning Studies and Evaluation of Laboratory-Scale Experiments Using Pink
Guava Puree as a Fouling Deposit Model, Journal of Food Process Engineering, 38 (2015), pp 583-593
42. Juferi Idris, Yoshihito Shirai, Yoshito Andou, Ahmad Amiruddin Mohd Ali, Mohd Ridzuan Othman, Izzudin Ibrahim,
Mohd Ali Hassan, 2015, Self-sustained carbonization of oil palm biomass produced an acceptable heating value
charcoal with low gaseous emission, Journal of Cleaner Production, 89 (2015), pp 257-261
43. B. Y. Lim, R. Shamsudin, B. T. H. T. Baharudin, R. Yunus, 2015, Performance Study of a Jatropha Curcas l. Fruit
Shelling Machine for Kernel Recovery in Biodiesel Production, Applied Engineering in Agriculture, 31 (5), pp 755-765
44. Sulaiman, S., Mokhtar, M.N., Naim, M.N., Baharuddin, A.S., Salleh, M.A.M., Sulaiman, A., 2015, Study on the
preparation of cellulose nanofibre (CNF) from Kenaf Bast fibre for enzyme immobilization application, Sains
Malaysiana, 44 (11), pp 1541-1550, I.F 0.446
45. Penjumras, P., Abdul Rahman, R., Talib, R.A., Abdan, K., 2015, Response Surface Methodology for the
Optimization of Preparation of Biocomposites Based on Poly(lactic acid) and Durian Peel Cellulose, Scientific World
Journal, 2015 (2015), pp 1-12
46. Nizami, A.-S., Rehan, M., Ouda, O.K.M., Shahzad, K., Sadef, Y., Iqbal, T., Ismail, I.M.I., 2015, An argument for
developing waste-to-energy technologies in Saudi Arabia, Chemical Engineering Transactions, 45 (2015), pp 337-
342
47. Shamsudin, R., Buang, S., Aziz, N.A., 2015, Effect of different extraction methods on the physicochemical properties
of pomelo juice, Chemical Engineering Transactions, 45 (2015), pp 265-270
48. Siti Noraida Abd Rahim, Alawi Sulaiman, Ku Halim Ku Hamid, Nurul Aini Edama, and Azhari Samsu Baharuddin,
2015, Effect of Agitation Speed for Enzymatic Hydrolysis of Tapioca Slurry Using Encapsulated Enzymes in an
Enzyme Bioreactor, International Journal of Chemical Engineering and Applications, 6 (1), pp 38-41
49. Meei Chien Quek, Nyuk Ling Chin, Yus Aniza Yusof, Sheau Wei an, Chung Lim Law, 2015, Preliminary nitrite,
nitrate and colour analysis of Malaysian edible bird's nest, Information Processing in Agriculture, 2 (2015), pp 1-5
50. Y.A Yusof, C.J. Etti, N.L. Chin, 2015, Development of Nutraceutical Product, International Journal on Advanced
Science Engineering Information Technology, 5 (3), pp 50-56
2.5.2 Prosiding
JABATAN KEJURUTERAAN AEROANGKASA
1. Basri, A.A., Zuber, M., Aziz, A.F.A., Ali, R.M., Tamagawa, M., Ahmad, K.A., Computational fluid dynamics study of
the aortic valve opening on hemodynamics characteristics in proceedings of the 2014 IEEE Conference on
Biomedical Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet", Miri,
Sarawak, Malaysia
JABATAN KEJURUTERAAN BIOLOGI DAN PERTANIAN
1. Nurul Hanira,M.L., Hasfalina C.M., A. Sani., & M. Rashid, Comparison of Lime Powder and Caustic Soda as a Pre-
Treatment for Ammonia-Nitrogen Removal from a Scheduled Waste Leachate in proceedings of the International
Conference on Mathematics, Engineering and Industrial Applications 2014, Penang, Malaysia
Senarai Penerbitan Tahun 2015 / List of publications in 2015
2. Ramin Shamsiri, Wan Ishak Wan Ismail, Desa Ahmad, Adaptability Factors for Open-field Tomato Production in
East and West of Malaysia in proceedings of the American Society of Agricultural and Biological Engineers Annual
International Meeting 2015, New Orleans, United States
3. Shamshiri, R., Ismail, W.I.W., Man, H.C., Ahmad, D., Light condition based analysis of microclimate parameters for
improvement of closed-field tomato production in tropical lowlands in proceedings of the American Society of
Agricultural and Biological Engineers Annual International Meeting 2015, New Orleans, United States
4. DI Onwude, N. Hashim, R Janius, N Nawi, K Abdan, Computer Simulationof Convective Hot Air Drying Kinetics of
Pumpkin (Cucurbita Moschata) in proceedings of the 8th Asia-Pacific Driying Conference (ADC 2015), Kuala Lumpur,
Malaysia
5. Nurulhuda Khairudin, Paul C. Struik, Karel J. Keesman, Set-membership Identification of an Agro-ecosystem from
a Small Data Set: The Case of Ammonia Volatilisation in a Floode Rice Field in proceedings of the 8th Vienna
International Conferenceon Mathematical Modelling - MATHMOD 2015, Vienna, Austria
6. B.G. Jahun, D. Ahmad, S. Sulaiman, M.R. Mahdi, Design Optimization Parameters for Tractor Mounted Mulcher
Blades in proceedings of the 4th International Scientific Conference on AplliedSciences and Engineering, Langkawi
Lagoon Resort
7. Adebayo Segun Emmanuel, Norhashila Hashim, Khalina Abdan, The Development and Potential of Laser-Induced
Light Backscattering Imaging (LLBI) for Detection of Fruit Quality in proceedings of the International Conference on
Life Science and Biological Engineering, Tokyo, Japan
8. M.N.A Uda, C.M. Hasfalina, A.A. Samsuzana, S. Faridah, I. Zamri, B. Siti Noraini, W. Nur Sabrina & U. Hashim,
Immunosensor Development Formatting for Tungro Disease Detection using Nano-Gold Antibody Particles
Application in proceedings of 11th Asian Conference on Chemical Sensors, Rasa Sayang Resort-Shang Ri La,
Penang, Malaysia
9. M.N.A Uda, C.M. Hasfalina, A.A. Samsuzana, S. Faridah, I. Zamri, B. Siti Noraini, W. Nur Sabrina & U. Hashim,
Immunosensor Development For Rice Tungro Bacilliform Virus (RTBV) Detection using Antibody Nano-Gold
Conjugate in proceedings of 11th Asian Conference on Chemical Sensors, Rasa Sayang Resort-Shang Ri La,
Penang, Malaysia
10. M.N.A Uda, C.M. Hasfalina, A.A. Samsuzana, S. Faridah, I. Zamri, B. Siti Noraini, W. Nur Sabrina & U. Hashim,
Determination of Set Potential Voltage for Cucumber Mosaic Virus Detection using Screen Printed Carbon Electrode
in proceedings of 11th Asian Conference on Chemical Sensors, Rasa Sayang Resort-Shang Ri La, Penang,
Malaysia
11. M.N.A Uda, C.M. Hasfalina, A.A. Samsuzana, S. Faridah, I. Zamri, B. Siti Noraini, W. Nur Sabrina & U. Hashim,
Determination of Fixed-potential Selection using Chronoamperometry Analysis using Screen Printed Carbon
Electrode for Rice Tungro Bacilliform Virus (RTBV) Detection in proceedings of 11th Asian Conference on Chemical
Sensors, Rasa Sayang Resort-Shang Ri La, Penang, Malaysia
12. M.N.A Uda, C.M. Hasfalina, A.A. Samsuzana, S. Faridah, I. Zamri, B. Siti Noraini, W. Nur Sabrina & U. Hashim,
Determination of Fixed-potential Selection using Chronoamperometry Analysis using Screen Printed Carbon
Electrode for Rice Tungro Bacilliform Virus (RTBV) Detection in proceedings of 11th Asian Conference on Chemical
Sensors, Rasa Sayang Resort-Shang Ri La, Penang, Malaysia
JABATAN KEJURUTERAAN ELEKTRIK DAN ELEKTRONIK
1. Azadian, F., Radzi, M.A.M., Wahab, N.I.A., Controlled islanding strategy for power systems based on flexible semi-
supervised spectral clustering in proceedings of the 2013 IEEE Student Conference on Research and Development,
SCOReD 2013, Putrajaya, Malaysia
2. Jamaluddin, F.N., Ahmad, S.A., Noor, S.B.M., Hassan, W.Z.W, Fatigue mapping based on electromyography and
heart rate behavior after single treadmill test in proceedings of the 2014 IEEE Conference on Biomedical Engineering
and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet", Miri, Sarawak, Malaysia
3. Fauzani, N.J., Ahmad, S.A., Noor, S.B.M., Hasan, W.Z.W., Kamal, M., Aminnudin, A., Bakti, Z.A.K., Two electrodes
system: Performance on ECG FECG and EMG detection in proceedings of the 2013 IEEE Student Conference on
Research and Development, SCOReD 2013, Putrajaya, Malaysia
Senarai Penerbitan Tahun 2015 / List of publications in 2015
4. Kamarudin, N.H., Ahmad, S.A., Hassan, M.K., Yusoff, R.M., Dawal, S.Z., Muscle contraction analysis during lifting
task in proceedings of the 2014 IEEE Conference on Biomedical Engineering and Sciences: "Miri, Where
Engineering in Medicine and Biology and Humanity Meet", Miri, Sarawak, Malaysia
5. Mansor, H., Gunawan, T.S., Khan, S., Othman, N.I., Tazali, N., Boby, R.I., Mohd-Noor, S.B., Self-tuning dead beat
PD controller for pitch angle control of a bench-top helicopter in proceedings of the 5th International Conference on
Computer and Communication Engineering: Emerging Technologies via Comp-Unication Convergence, ICCCE 2014,
Kuala Lumpur, Malaysia
6. Kamsani, N.A., Sidek, R.M., Yeo, C.W., Gan, D., Quek, C.T., Krishnasamy, S., Lee, Y.M., Bolanos, M.A., Analog IC
test and product engineering curriculum for Microelectronics Industry in proceedings of the IEEE International
Conference on Teaching, Assessment and Learning for Engineering, Te Papa Tongarewa National Museum of New
Zealand, Wellington, New Zealand
7. Rahman, N.F.A.A., Radzi, M.A.M., Che Soh, A. Mariun, N., Rahim, N.A., Double Soft-computing Techniques Based
Triple Functionalities for Shunt Active Power Filter with Voltage Source Inverter Topology in proceedings of the IEEE
15th International Conference on Environment and Electrical Engineering, EEEIC 2015, Rome, Italy
8. Jamaluddin, F.N., Ahmad, S.A., Noor, S.B.M., Hassan, W.Z.W., Yaakob, A., Adam, Y.b, Ali, S.H.M., Amplitude
and frequency changes in surface EMG of biceps femoris during five days Bruce Protocol treadmill test in
Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, MiCo
Center, Milano Congressi CenterMilan, Italy
9. Rahimipour, S., Flayyih, W.N., Kamsani, N.A., Stan, M., Rohani, F.Z, Investigating the impact of on-chip
interconnection noise on dynamic thermal management efficiency in Proceedings of the 11th Conference on Ph.D.
Research in Microelectronics and Electronics, PRIME 2015, Glasgow, United Kingdom
10. Tan, G.H., Sidek, R.M., Isa, M.M, Design of ultra-low voltage and low-power CMOS current bleeding mixer in
Proceedings of the IEEE Asia-Pacific Conference on Circuits and Systems, Proceedings, APCCAS, Ishigaki Island,
Okinawa, Japan
11. Ghapanchizadeh, H. , Ahmad, S.A. , Ishak, A.J., Investigate the transcendent adapted of wavelet threshold
algorithms for elbow movement by surface EMG signal in Proceedings of the 2014 IEEE Conference on Biomedical
Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet", Kuala Lumpur,
Malaysia
12. Behrooz, F., Mariun, N.B., Hamiruce Marhaban, M., Radzi, M.A.M., Ramli, A.R, New design approach to MIMO
nonlinear controller for direct expansion air conditioning system in building automation system in Proceedings of the
IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015, Rome, Italy
13. Al-Quraishi, M.S., Ishak, A.J., Ahmad, S.A., Hasan, M.K., Multichannel EMG data acquisition system: Design and
temporal analysis during human ankle joint movements in Proceedings of the 2014 IEEE Conference on Biomedical
Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet", Kuala Lumpur,
Malaysia
14. Zaber, N.M., Ishak, A.J., Soh, A.C., Hassan, M.K., Abidin, Z.Z., Designing PID controller for position control with
disturbance in Proceedings of the 2014 2nd International Conference on Computer, Communications, and Control
Technology, Art Proceeding, Imperial Hotel, Kuching, Sarawak, Malaysia
JABATAN KEJURUTERAAN KIMIA DAN ALAM SEKITAR
1. Syafiie, S., Tadeo, F, Improving command tracking for QFT controllers in proceedings of the European Control
Conference, ECC 2009, Budapest, Hungary
2. E.A Lokman, S.A Hussain, S. Syam, H.M. Yusoff, Loss of Primary Containment: A Structured LOPC Control
Framework in Managing Process Safety Hydrocarbon Leakages in proceedings of the APCChE 2015 Congress
incorporating Chemeca 2015, ECC 2009, Melbourne, Victoria
3. Siti Aslina Hussain, Siti Nadimah Muhammad, Azni Idris, Numerical Studies of Cosmic Media II in Wastewater
Treatment Plant using Computational fluid dynamic in proceedings of the 28th Symposium of Malaysian Chemical
Engineers 2015, Palm Garden, IOI Resort, Putrajaya
Senarai Penerbitan Tahun 2015 / List of publications in 2015
4. E.A Lokman, S.A Hussain, S. Syam, H.M. Yusoff, Loss of Primary Containment: A Structured LOPC Control
Framework in Managing Process Safety Hydrocarbon Leakages in proceedings of the APCChE 2015 Congress
incorporating Chemeca 2015, Melbourne, Victoria
5. Siti Aslina Hussain, Siti Nadimah Muhammad, Azni Idris, Numerical Studies of Cosmic Media II in Wastewater
Treatment Plant using Computational fluid dynamic in proceedings of the 28th Symposium of Malaysian Chemical
Engineers 2015, Palm Garden, IOI Resort, Putrajaya
6. Ezaideen Ahmad Lokman, Siti Aslina Hussain, Hamdan Mohamed Yusoff and Syafiie Syam, Dynamic Model for a
Heat Exchanger Tube Rupture Discharging High-preussure Natural Gas Vapor into Low-Pressure Liquid-filled Shell
in LNG Processing Industry in proceedings of the 2nd CCPS Global Summit on Process Safety, Hotel Istana, K.L
7. Shamsul Izhar & Masatoshi Nagai, Study of Co-Mo Carbides as Anode Electrocatalyst for PEFC in proceedings of
the Fuel Cell & Hydrogen Technology (ICFCHT 2015), Kuala Lumpur, Malaysia
8. Emeliana Rose Jusoh @ Taib, Luqman Chuah Abdullah, Min Min Aung, Mek Zah Salleh, Mahiran Basri, Sariah
Saalah, Development of Eco-friendly UV Curable Coatings Based on Epoxidized Jatropha Oil/Palm Oil Acrylate in
proceedings of the The 4th Federation of Asian Polymer Societies - International Polymer Congress (4FAPS-IPC
2015), Putra World Trade Centre, Kuala Lumpur, Malaysia
9. Emeliana Rose Jusoh @ Taib, Luqman Chuah Abdullah, Min Min Aung, Mek Zah Salleh, Mahiran Basri, Sariah
Saalah, Coating Performance and Characteristics for UV-curable Epoxidised Acrylate Coating from Jatropha
Oil/Palm Oil in proceedings of the Malaysia Polymer International Conference 2015 (MPIC 2015), Palm Garden
Hotel, Putrajaya, Malaysia
10. Sariah Saalah, Luqman Chuah Abdullah, Min Min Aung, Mek Zah Salleh, Dayang Radiah Awang Biak, Mahiran
Basri, Emeliana Rose Jusoh @ Taib, Mechanical Properties of Jatropha Oil-based in proceedings of the Malaysia
Polymer International Conference 2015 (MPIC 2015), Palm Garden Hotel, Putrajaya, Malaysia
11. Ismail M. Nasir & Tinia I. Mohd Ghazi, Emeliana Rose Jusoh @ Taib, Performance Study between Novel Oscillatory
Flow Mixing and Stirred Bioreactors Treating Cattle Manure for Biogas Production in proceedings of the International
Conference on Engineering and Research 2015 (FEIIC 2015), Madinah, Kingdom of Sudi Arabia
12. Nor Azrin Ahmad Kurnin, Nor Syamsila Sarian, Nor Azrin Ahmad Kurnin, Hiroyuki Yoshida, Shamsul Izhar, Shamsul
Izhar, Recovery of Palm Oio Extracted from Pressed Mesocarp Fiber by Sub-critical Water in proceedings of the
Asian Congress on Biotechnology 2015 (ACB2015), Kuala Lumpur, Malaysia
13. Nor Azrin Ahmad Kurnin, Hiroyuki Yoshida, Shamsul Izhar, Shamsul Izhar, Sub-critical Water Application in Oil
Extraction from Oil Palm Empty Fruit Bunch in proceedings of the Asian Congress on Biotechnology 2015
(ACB2015), Kuala Lumpur, Malaysia
14. Firdaus Kamuri, Zurina Zainal Abidin, Nurul Amziah Md Yunus, Mohd Nizar Hamidon, Mohd Hanif Yaacob, Suryani
Kamarudin, Siti Zalikha Zhukhi, Optimization on the Preparation of Microfluidic Channel using Dry Film Resist in
proceedings of the 2015 International Conference on Smart Sensors and Application (ICSSA), Grand Seasons Hotel,
Kuala Lumpur, Malaysia
15. Cai Chee Keong, Chantara Thevy Ratnam, Luqman Chuah Abdullah & Hamdan Mohamed Yusoff, Tensile
Properties and Thermal Stability of Gamma Irradiated Epoxidized Natural Rubber Latex with Latex with the Presence
of Sensitizer in proceedings of the 5th International Conference on Recent Advances in Materials, Minerals &
Environment (RAMM) & 2nd Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), Penang,
Malaysia
16. Sariah Saalah, Luqman Chuah Abdullah, Min Min Aung, Mek Zah Salleh, Dayang Radiah Awang Biak, Mahiran
Basri, Emeliana Rose Jusoh, Suhaini Mamat, Rheological Behavior of Jatropha Oil-based Waterborne Polyurethane
Dispersions in proceedings of the The 4th Federation of Asian Polymer Societies - International Polymer Congress
(4FAPS-IPC 2015), Putra World Trade Centre, Kuala Lumpur, Malaysia
17. Sariah Saalah, Luqman Chuah Abdullah, Min Min Aung, Mek Zah Salleh, Dayang Radiah Awang Biak, Mahiran
Basri, Emeliana Rose Jusoh, Suhaini Mamat, Rheological Behavior of Jatropha Oil-based Waterborne Polyurethane
Dispersions in proceedings of the The 4th Federation of Asian Polymer Societies - International Polymer Congress
(4FAPS-IPC 2015), Putra World Trade Centre, Kuala Lumpur, Malaysia
JABATAN KEJURUTERAAN SISTEM KOMPUTER DAN KOMUNIKASI
Senarai Penerbitan Tahun 2015 / List of publications in 2015
1. Noh, Z.M., Ramli, A.R., Hanafi, M., Saripan, M.I., Review on a palm vein infrared image acquisition system in
proceedings of the 2013 IEEE Student Conference on Research and Development, SCOReD 2013, Putrajaya,
Malaysia
2. Abd, S.K., Al-Haddad, S.A.R., Hashim, F., Abdullah, A., A review of cloud security based on cryptographic
mechanisms in proceedings of the International Symposium on Biometrics and Security Technologies, ISBAST 2014,
Kuala Lumpur, Malaysia
3. Shaukat, H.R., Hashim, F., Sali, A., Danger theory based node replication attacks detection in mobile wireless
sensor network in proceedings of the IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE
2014, Penang, Malaysia
4. Kousha, M., Hashim, F., Backhaul and performance optimality of joint processing schemes over the cluster area in
proceedings of the IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2014, Penang,
Malaysia
5. Nematollahi, M.A., Al-Haddad, S.A.R., Doraisamy, S., Zarafshan, F., Ranjbari, M., Interacting video information via
speech watermarking for mobile second screen in Android smartphone in proceedings of the IEEE Student
Conference on Research and Development, SCOReD 2013, Putrajaya, Malaysia
6. Abdulhasan, M.Q., Salman, M.I., Ng, C.K., Noordin, N.K., Hashim, S.J., Hashim, F.B., A threshold feedback
compression scheme of channel quality indicator (CQI) in LTE systems in proceedings of the IEEE Student
Conference on Research and Development, SCOReD 2013, Putrajaya, Malaysia
7. Azmi, M.H., Saripan, M.I., Nordin, A.J., Brain anatomical variations among Malaysian population in proceedings of
the 2014 IEEE Conference on Biomedical Engineering and Sciences: "Miri, Where Engineering in Medicine and
Biology and Humanity Meet", Miri, Sarawak, Malaysia
8. Osman, N.D., Salikin, M.S., Saripan, M.I., Aziz, M.Z.A., Daud, N.M., Metal artefact correction algorithm based-on
DSAT technique for CT images in proceedings of the 2014 IEEE Conference on Biomedical Engineering and
Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet", Miri, Sarawak, Malaysia
9. Kazemian, M., Varahram, P., Ali, B.B.M., Mohammady, S., A peak to average power ratio reduction scheme to
increase power efficiency in broadband communication systems in proceedings of the 20th Asia-Pacific Conference
on Communication, APCC 2014, Pattaya, Thailand
10. Naeem, N., Ismail, A., Alhawari, A.R.H., Mahdi, M.A, Planar terahertz metamaterial using triangular spiral ring
resonator in proceedings of the IEEE 2nd International Symposium on Telecommunication Technologies, ISTT 2014,
Langkawi, Malaysia
11. N Abdulhasan, M.Q., Salman, M.I., Ng, C.K., Noordin, N.K., Hashim, S.J., Hashim, F.B., A channel quality
indicator (CQI) prediction scheme using feed forward neural network (FF-NN) technique for MU-MIMO LTE system in
proceedings of the IEEE 2nd International Symposium on Telecommunication Technologies, ISTT 2014, Langkawi,
Malaysia
12. Talebpour, F., Varahram, P., B. Mohd. Ali, B., Sali, A., Compensation of frequency independent I/Q imperfections
using LMS algorithm in proceedings of the IEEE 2nd International Symposium on Telecommunication Technologies,
ISTT 2014, Langkawi, Malaysia
13. Terng, L.J., Hashim, F, Performance analysis of Coordinated MultiPoint (CoMP) in long term evolution-advanced in
proceedings of the IEEE 2nd International Symposium on Telecommunication Technologies, ISTT 2014, Langkawi,
Malaysia
14. Musaddiq, A., Hashim, F., Distributed channel assignment based on congestion information in wireless mesh
network in proceedings of the IEEE 2nd International Symposium on Telecommunication Technologies, ISTT 2014,
Langkawi, Malaysia
15. Al-Samawi, A., Sali, A., Noordin, N.K., Othman, M., Hashim, F., Base station blossoming and withering technique
for heterogeneous wireless networks using fuzzy logic in proceedings of the IEEE 2nd International Symposium on
Telecommunication Technologies, ISTT 2014, Langkawi, Malaysia
16. Alsahag, A.M., Ali, B.M., Noordin, N.K., Mohamad, H., Ramli, N., Two-dimensional burst construction with QoS
assurance for OFDMA mobile WiMAX system in proceedings of the IEEE 2nd International Symposium on
Telecommunication Technologies, ISTT 2014, Langkawi, Malaysia
Senarai Penerbitan Tahun 2015 / List of publications in 2015
17. Mustapha, I., Ali, B.M., Sali, A., Rasid, M.F.A., Mohamad, H., Energy-aware cluster based cooperative spectrum
sensing for cognitive radio sensor networks in proceedings of the IEEE 2nd International Symposium on
Telecommunication Technologies, ISTT 2014, Langkawi, Malaysia
18. Mohamad, R., Harun, H., Mokhtar, M., Adnan, W.A.W., Dimyati, K., On the robustness of measurement of
reliability stopping criterion in turbo iterative decoding in proceedings of the 16th International Conference on
Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing, SNPD 2015, Takamatsu,
Japan
19. Musarudin, M., Saripan, M.I., Mashohor, S., Saad, W.H.M., Hashim, S., Nordin, A.J, Validation of a clinical PET
scanner using monte carlo simulation code: MCNP5 in proceedings of the 8th EUROSIM Congress on Modelling and
Simulation, EUROSIM 2013, Wales Millennium Centre, Cardiff, Wales, United Kingdom
20. Karim, H.A., Mohamad, H., Ramli, N.b , Sali, A., Multiple description video coding for underlay cognitive radio
network, Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering, LNICST, Doha; Qatar
21. Mohamad, R., Harun, H., Mokhtar, M., Adnan, W.A.W., Anas, N.M., Dimyati, K., Early stopping turbo iteration at
low SNR for CE-based stopping criteria in proceedings of the IEEE Region 10 Annual International Conference,
Bangkok, Thailand
22. Musaddiq, A., Hashim, F, Multi-hop wireless network modelling using OMNET++ simulator in proceedings of the
2015 2nd International Conference on Computer, Communications, and Control Technology, Art Proceeding, Imperial
Hotel Kuching, Sarawak, Malaysia
JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
1. Bahiraei, N., Panjehfouladgaran, H., Yusuff, R.M., Ranking of critical success factors in reverse logistics by TOPSIS in
proceedings of the 5th International Conference on Industrial Engineering and Operations Management, IEOM 2015,
Dubai, United Arab Emirates (UAE)
2. Jayaseelan, N., Aziz, F.A., Hang Tuah Baharudin, B.T., Radzi, A.M., Using regression analysis for energy
management in the chemical processing industry in proceedings of the 3rd International Conference on Frontier of
Energy and Environment Engineering, ICFEEE 2014, Taichung, Taiwan
3. Hassan, S.N., Yusuff, R.M., Zein, R.M., Hussain, M.R., Selvan, H.K.T, Anthropometric data of Malaysian workers in
proceedings of the 10th Pan-Pacific Conference on Ergonomic, Tokyo, Japan
4. Izadi Najafabadi, M., Somers, B., Nuraini, A.A., Validation of a Reduced Chemical Mechanism Coupled to CFD Model
in a 2-Stroke HCCI Engine, SAE Technical Papers, Cobo Center, Detroit, United States
5. Yusuff, R.M., Hussain, M.R., Latif, N., Rahman, A.A., Rashid, S.N.S.A., Abdullah, H, Occupational safety issues at
workplace among older fishermen in Malaysia in proceedings of the 10th Pan-Pacific Conference on Ergonomic, Tokyo,
Japan
6. Abidin, A.S.Z., Muslimen, R., Mohamaddan, S., Yusuff, R.M., Daud, N.A.Q.M., Design capabilities development in a
Malaysian automotive vendor company in proceedings of the 5th International Conference on Industrial Engineering
and Operations Management, Hyatt Regency Dubai, Dubai, United Arab Emirates
7. Nima Bahiraei, Hamidreza Panjehfouladgaran, Rosnah Mohd. Yusuff, Ranking of Critical Success Factors in Reverse
Logistics by TOPSIS in proceedings of the 5th International Conference on Industrial Engineering and Operations
Management, Hyatt Regency Dubai, Dubai, United Arab Emirates
JABATAN KEJURUTERAAN PROSES DAN MAKANAN
1. Siti Hajar Othman, Effects of Content of Halloysite Nanoclay and Glycerol on the Mechanical Properties of
Bionanocomposite Films Based on Polylactic Acid and Halloysite Nanoclay in proceedings of the Malaysia Polymer
International Conference 2015 (MPIC 2015), Palm Garden Hotel, Putrajaya, Malaysia
2. Siti Hajar Othman, Innovation of Biopolymer Based Nanocomposite as Edible Film in proceedings of the Malaysia
Polymer International Conference 2015 (MPIC 2015), Palm Garden Hotel, Putrajaya, Malaysia
Senarai Penerbitan Tahun 2015 / List of publications in 2015
3. Rosnah Shamsudin, Effect of Oven-Drying on the Colour of pomelo Fruit Waste (Citrus grandis) in proceedings of the
8th Asia Pacific Drying Conference (ADC 2015), Kuala Lumpur, Malaysia
4. Y.A. Yusof, S. W. Tan, N. L. Chin, Compaction Chracteristics of Rice Straw, Sugarcane Bagasse, Soybean Residue
and Napier Grass in proceedings of the 3rd International Conference of Sustainable Agriculture, Food and Energy
(SAFE2015), Ho Chi Minh City, Vietnam
5. Suhaiza Hanim Hanipah, Farah Nadia Omar, Loo Yu Xiang, Mohd Afandi P Mohammed, Azhari Samsu Baharuddin,
Jaafar Abdullah, Micromechanics of oil palm fibres with silica bodies in proceedings of the 8th Plant Biomechanics
International Conference, Nagoya University, Japan
6. Rabitah Zakaria, Chan M. Luan, Nor Hakimah Ramly, Surfactant-Assisted Aqueous Extraction of Residual Oil from
Palm-Pressed Mesocarp Fibre in proceedings of the 17th International Conference on Chemical, Biological and
Environmental Engineering (ICCBEE 2015), Paris, France
7. Rabitah Zakaria, Akmal Baharuddin, Muhammad Nazry Chik, Liyana Yahya, Irina Harun, Preparation and
Characterization of Biodiesel from Microalgae used in the Carbon Capture of Flue Gas from Power Plant in proceedings
of the 5th International Conference on Environment 2015 (ICENV 2015), Penang, Malaysia
8. NH Ramly, R Zakaria, MN Naim, Characterization of Crude Palm Oil O/W Emulsion Produced with Tween 80 and
Potential in Residual Oil Recovery of Palm Pressed Mesocarp Fibre in proceedings of the 5th Internatioanl Conference
on Chemical and Bioprocess Engineering (ICCBPE 2015), Kota Kinabalu, Sabah, Malaysia
9. S M Zakaria, S M Mustapa Kamal, M R Harun, R Omar, J Roslan, Optimization of Ultrasonic-Assisted Water Extraction
of Crude Polysaccharides from Chlorella sp. By Response Surface Methodology in proceedings of the 5th Internatioanl
Conference on Chemical and Bioprocess Engineering (ICCBPE 2015), Kota Kinabalu, Sabah, Malaysia
10. Anvarjon Ahmedov, The Convergence of the Wavelet Expansions in the Classes of Liouville in proceedings of the 7th
International Conference on Research and Education in Mathematics (ICREM7), Kota Kinabalu, Kuala Lumpur,
Malaysia
2.5.3 Buku
Jabatan Kejuruteraan Awam
1. Kamil Muhammad Kafi and Helmi Z. M. Shafri, 2015, Monitoring Land Use and Urban Changes in Kaduna Using
Satellite Data, LAP Lambert Academic Publishing, Germany, ISBN 978-3-659-47781-2
Jabatan Kejuruteraan Eektrik dan Elektronik
1. Mohammad Tolou Askari, Mohd. Zainal Abidin Ab. Kadir, Saeideh Bolandifar, 2015, Loss of life of the mineral oil
immersed transformer, LAP LAMBERT Academic Publishing GmbH & Co. KG, Saarbrucken, Deutschland, ISBN 978-3-
659-63006-4
Jabatan Kejuruteraan Kimia dan Alam Sekitar
1. Salah Eldin Elnashaie, 2015, Nanotechnology for Chemical Engineers, Springer, ISBN 978-981-287-495-5
2.5.4 Bab Dalam Buku
Jabatan Kejuruteraan Elektrik dan Elektronik
1. Mohammad Rezazadeh Mehrjou, Norman Mariun, Mahdi Karami, Samsul Bahari Mohd. Noor, Sahar Zolfaghari,
Norhisam Misron, Mohd Zainal Abidin Ab. Kadir, Mohd. Amran Mohd. Radzi and Mohammad Hamiruce Marhaban,
Senarai Penerbitan Tahun 2015 / List of publications in 2015
2015, Chapter 5: Wavelet-Based Analysis of MCSA for Fault Detection in Electrical Machine, Wavelet Transform and
Some of Its Real-World Applications, Dumitru Baleanu, InTech, 2015, ISBN 978-953-51-2230-2
Jabatan Kejuruteraan Kimia dan Alam Sekitar
1. M.X. Ng, S.P. Ong, N.L. Chin, L.A. Chuah and C.L. Law, 2015, Chapter 6: Review of Food Toxicological Issues
Associated with Rubber Products, Processing of Foods, Vegetables and Fruits: Recent advances, Ching Lik Hii, Sachin
Vinayak Jangam, Sze Pheng Ong, Pau Loke Show and Arun Sadashiv Mujumdar, Published in Singapore,
ISBN 978-981-09-6284-5
2. Thing Chai Tham, Ching Lik Hii, Sze Pheng Ong, Luqman Chuah Abdullah and Chung Lim Law, 2015, Measurement
on the Effect of Microwave Energy in Drying-Technical Review, Processing of Foods,Vegetables and Fruits: Recent
advances, Ching Lik Hii, Sachin Vinayak Jangam, Sze Pheng Ong, Pau Loke Show and Arun Sadashiv Mujumdar,
Published in Singapore, ISBN 978-981-09-6284-5
3. Wan Azlina Wan Ab Karim Ghani, Nur Zalikha Rebitanim, Mohamad Amran Mohd Salleh, and Azil Bahari Alias, 2015,
Chapter 50: Carbon Dioxide Adsorption on Coconut Shell Biochar, Progress in Clean Energy Volume 1, Ibrahim Dincer,
C. Ozgur Colpan, Onder Kizilkan, M. Akif Ezan, Springer International Publishing Switzerland,
ISBN 978-3-319-16708-4
Jabatan Kejuruteraan Mekanikal dan Pembuatan
1. Julkapli, N.M., Bagheri, S., Sapuan, S.M., 2015, Chapter 6: Multifunctionalized carbon nanotubes polymer composites:
Properties and applications, Eco-friendly Polymer Nanocomposites (Processing and Properties), Vijay Kumar Thakur,
Manju Kumari Thakur, Springer, ISBN 978-81-322-2469-3
2. Rosnah Mohd Yusuff, 2015, Occupational Safety Issues at Workplace among Older Fisherman in Malaysia, New
Ergonomics Perspective, Sakae Yamamoto, CRC Press (Tailor & Francis Group), ISBN 978-1-138-02751-0
3. Mansor, M.R., Salit, M.S., Zainudin, E.S.c, Aziz, N.A., Ariff, H., 2015, Life cycle assessment of natural fiber polymer
composites, Agricultural Biomass Based Potential Materials, Khalid Rehman Hakeem, Mohammad Jawaid, Othman
Alothman, Springer International Publishing, ISBN 978-331913847-3; 978-331913846-6
2.5.5 Kertas Polisi
Jabatan Kejuruteraan Awam
1. Mohd Saleh Jaafar, 2015, Pelan Pembangunan Pendidikan Malaysia 2015-2025 (Pendidikan Tinggi), Kementerian
Pendidikan Malaysia
2.5.6 Majalah
Jabatan Kejuruteraan Awam
1. Farzad Hejazi, 2015, Pengalaman Kehilangan Rakan Dorong Jurutera Cari Penyelesaian Bina Bangunan Kalis
Gempa, Astro Awani, pp 1-5
2. Biswajeet Pradhan, 2015, Local Authorities Need More Clout to Go After Errant Contractors, The Star
Jabatan Kejuruteraan Biologi dan Pertanian
1. Desa Ahmad, 2015, Tanam Kenaf Secara Ekonomik, Harian Metro (Agro)
Jabatan Kejuruteraan Elektrik dan Elektronik
Senarai Penerbitan Tahun 2015 / List of publications in 2015
1. Mohd Zainal Abidin Ab Kadir, 2015, Malaysia Ketiga di Dunia Paling Kerap dipanah Petir, Berita Harian, pp 14-15
2. Mohd Zainal Abidin Ab Kadir, 2015, Kebal Serangan Kilat, Infiniti, pp 44-45
3. Mohd Zainal Abidin Ab Kadir, 2015, Jumlah Mangsa Panahan Petir Tinggi, Harian Metro
4. Mohd Zainal Abidin Ab Kadir, 2015, Tenaga Solar Lebih Produktif, Kosmo
Jabatan Kejuruteraan Sistem Komputer dan Komunikasi
1. Mohd Adzir Mahdi, 2015, Kecewa Gagal Tembusi Pasaran, Utusan Malaysia (Teknologi)
Jabatan Kejuruteraan Proses dan Makanan
1. Yus Aniza Yusof, 2015, Formulasi Tablet Buah-buahan, Herba, Harian Metro (Agro)
2. Chin Nyuk Ling, 2015, UPM Cipta Teknologi Gelombang Ultrabunyi Hasilkan Roti Berkualiti, Utusan Malaysia
3. Rosnah Shamsudin, 2015, Mesin Tat Nanas Gulung - Bantu jimatkan masa, pengeluaran lebih cepat, Utusan
Malaysia
4. Chin Nyuk Ling, 2015, UPM hasilkan kek, roti lebih lazat, Herba, Berita Harian (National), pp 3-3
5. Rosnah Shamsudin, 2015, Pisah Sabut: Penyelidik UPM hasilkan 'Drupe Husker' mampu asingkan 100 peratus
daripada biji, Harian Metro (Agro)
6. Rosnah Shamsudin, 2015, UPM Pusat Inovasi Keusahawanan, Utusan Melayu
7. Rosnah Shamsudin, 2015, Lebih cepat, lebih mudah: Penyelidik UPM cipta mesin kuih bijan yang rasanya sama
seperti dibuat secara tradisional, Harian Metro (Agro)
8. Rosnah Shamsudin, 2015, Pelet Serat Tinggi daripada Sisa Ladang Nanas, Dewan Kosmik Bil 1/2015, pp 34-37
9. Chin Nyuk Ling, 2015, UPM terap pengajaran teknologi hijau, Berita Harian (National)
10. Chin Nyuk Ling, 2015, Kerjasama Industri Pertanian Makanan, Harian Metro (Agro)
11. Azhari Samsu Baharuddin, 2015, Insight into Lignocellulosic Biodegradation and Its Potential for Enzyme Production,
Jurutera (Oktober 2015), pp 12-12
12. Mohammad Effendy Yaa'cob, 2015, Wajib Pasar Hasil Kajian, Harian Metro (Agro)
13. Rosnah Shamsudin, 2015, Ezy Coker mudahkan IKS proses makanan, Harian Metro
2.5.7 Lain-Lain Penerbitan
Jabatan Kejuruteraan Biologi dan Pertanian
1. Shaikh, I., Wayayok, A., & Lee T., Preference Index-Based Allocation of Optimizaed Cropping Area at the Mirpurkhas
Subdivision: Jamrao Irrigation Scheme in Sindh, Pakistan – Technical Papers, Journal of Irrigation and Drainage
Engineering, pp 1-10
2. Ramin Shamsiri, Wan Ishak Wan Ismail, Desa Ahmad, Determining Adaptability Factor in Modern Controlled Plant
Production System – Meeting Paper, ASABE 1st Climate change Symposium Adaptation and Mitigation