siemens industrial gas turbines - · pdf filesiemens industrial gas turbines ... 4 to 6 mw 8...

Siemens Industrial

Gas Turbines

Tel : 86-0769 83523198 / 4008111308

SOAR ENERGY TECHNOLOGY CO.,LTD

SOAR POWER GROU P

E-mail: [email protected]:http://www.soarpower.com

斯奥动力集团

The industrial gas turbine models with their compact and rugged design make them an ideal choice for both industrial power generation and mechanical drive applications.

Their high steam-raising capabilities help achieve overall plant efficiency of 80 percent or higher.

They are proven with more than 2,250 units sold at small utilities, independent power producers, and in the oil and gas industry.

Industrial

Gas turbines

SGT-800

SGT-600

SGT-750

SGT-500

SGT-700

SGT-400

Ind. Trent 60

Ind. RB211

Ind. 501

SGT-300

SGT-200

SGT-100

48 to 53 MW

24 / 25 MW

38 / 39 MW

19 / 19 MW

33 / 34 MW

13 to 14 / 13 to 15 MW

53 to 66 / 54 to 62 MW

27 to 32 / 28 to 34 MW

4 to 6 MW

8 / 8 MW

7 / 8 MW

5 / 6 MW

SGT-800...........................................................................................01

SGT-750...........................................................................................03

SGT-700...........................................................................................05

SGT-600...........................................................................................07

SGT-500...........................................................................................09

SGT-400...........................................................................................11

SGT-300...........................................................................................13

SGT-200...........................................................................................15

SGT-100...........................................................................................17

Gas turbines

URL:http://www.soarpower.com E-mail:[email protected]

In

du

stri

al a

nd

ae

rod

eri

vati

ve

gas

tu

rbin

es

50 Hz or 60 Hz

1.

References

SGT-800 Industrial gas turbine

The SGT-800 industrial gas turbine offers broad flexibility in fuels, operating conditions, maintenance concepts, package solutions, and ratings.

The excellent efficiency and steam-raising capability make it outstanding in cogeneration and combined cycle installa tions. The SGT-800-based power plant, designed for flexible operation, is perfectly suited as grid support.

The SGT-800 combines a simple, robust design, for high reliability and easy maintenance, with high efficiency and low emissions. With a proven, long-term record of successful installations around the world, the SGT-800 is an excellent choice for power generation for industrial and oil and gas applications.

Two SGT-800 packages at Amata Nakorn, Chonburi, Thailand

Amata Nakorn, Thailand

Combined cycle cogeneration power plantsCustomer: Amata B. Grimm Power Limited (ABP)Scope: 12 × SGT-800 gas turbines and 9 × SST-400 steam turbines

Hassi R‘mel, Algeria

Combined cycle power plantCustomer: AbengoaScope: 2 × SGT-800 gas turbines and 1 × SST-600 steam turbine

2.

Simple cycle power generation

47.5 MW version 50.5 MW version 53.0 MW version

Power output 47.5 MW(e) 50.5 MW(e) 53.0 MW(e)

Frequency 50/60 Hz 50/60 Hz 50/60 Hz

Gross efficiency 37.7% 38.3% 39.0%

Heat rate 9,547 kJ/kWh 9,389 kJ/kWh 9,231 kJ/kWh

Turbine speed 6,608 rpm 6,608 rpm 6,608 rpm

Pressure ratio 20.1 : 1 21.0 : 1 21.4 : 1

Exhaust gas flow 132.8 kg/s 134.2 kg/s 137.2 kg/s

Exhaust gas temperature 541 °C (1,007 °F) 553 °C (1,027 °F) 551 °C (1,024 °F)

NOx emissions ≤ 15 ppmvd at 15% O2 on fuel gas (with DLE)

1 × 1 Combined cycle power plant

Net plant output 66.6 MW(e) 71.4 MW(e) 74.0 MW(e)

Net plant efficiency 53.8% 55.1% 55.6%

Net plant heat rate 6,693 kJ/kWh 6,530 kJ/kWh 6,475 kJ/kWh

Number of gas turbines 1 1 1

2 × 1 Combined cycle power plant

Net plant output 135.4 MW(e) 143.6 MW(e) 150.0 MW(e)

Net plant efficiency 54.7% 55.4% 56.2%

Net plant heat rate 6,583 kJ/kWh 6,494 kJ/kWh 6,406 kJ/kWh

Number of gas turbines 2 2 2

Note: Standard design; ISO ambient conditions. No intake or exhaust loss. Fuel: Natural gas. Options available for other gases within specification and dual fuel with gas and Diesel no 2.The combined cycle plant SCC-800 is also available based on more than two SGT-800. All combined cycle performance is based on 2 pressure, no reheat.Dimensions exclude inlet filter housing and exhaust stack. For power generation, AC generator is included. For mechanical drive, driven equipment is excluded.

Physical dimensions

Classic package Single lift package

Approx. weight

290,000 kg (617,300 lb)

320,000 kg (705,500 lb)

Length 27.9 m (91 ft) 19.6 m (64 ft)

Width 7.3 m (24 ft) 4.7 m (15 ft)

Height 15.1 m (49 ft) 15.3 m (50 ft)

� Proven reliability

� Flexible solution

� Excellent performance

Power generation: 47.5/50.5/53.0 MW(e)

SGT-800 core engine is available in three ratings with standard options for hot and cold climates

Classic package – easily transported and installed at site, easy on-site maintenance

Single lift package – short installation and com-missioning time at site; U.S. adapted version


3.

References

SGT-750Industrial gas turbine

With maximized uptime, top-class performance, and a low environmental footprint offering the customer high lifetime profitability, the SGT-750 industrial gas turbine is a perfect choice for the oil and gas industry as well as industrial power generation.

The modular and flexible engine enables onshore or offshore applications, mechanical drive or heat and power.

It combines a robust, reliable design with high efficiency and low emissions.

The SGT-750 has a track record of proven and verified results after years in operation and several references in both power generation and mechanical drive applications such as pipeline and liquefied natural gas (LNG).

SGT-750 combined heat and power plant in Altamira, Mexico

Kaltex Altamira, Mexico

Combined heat and power plantCustomer: Energia MK KF, S.A. de C.V.Scope: 1 x SGT-750 gas turbine

Greifswald Wingas, Germany

Combined heat and power plantCustomer: Industriekraftwerk Greifs wald GmbH, LubminScope: 1 x SGT-750 gas turbine, auto mation & control for landfall station

4.

SGT-750 core engine with a free high-speed power turbine

Simple cycle power generation Mechanical drive applications

Power output 38.1 MW(e) 39.3 MW

Fuel Natural gas Natural gas

Frequency 50/60 Hz

Gross efficiency 40.2% 41.45%

Heat rate 8,953 kJ/kWh 8,685 kJ/kWh

Turbine speed 6,100 rpm 6,100 rpm

Pressure ratio 23.8 : 1 23.8 : 1

Exhaust gas flow ~ 113.8 kg/s ~ 113.8 kg/s

Exhaust temperature 458.1 °C (856.5 °F) 458.1 °C (856.5 °F)

NOx emissions < 15 ppmvd at 15% O2 on fuel gas (with DLE) <15 ppmvd at 15% O2 on fuel gas (with DLE)

Physical dimensions

Power generation package Mechanical drive package

Approx. weight

175,000 kg (385,809 lb) 76,000 kg (167,551 lb)

Length 20.3 m (66.6 ft) 12.3 m (40.35 ft)

Width 4.8 m (15.75 ft) 4.3 m (14.11 ft)

Height 4.1 m (13.45 ft) 4.1 m (13.45 ft)

Combined cycle power generation

Siemens combined cycle power plant

SCC-750 1 × 1 SCC-750 2 × 1

Net power output 49.4 MW(e) 99.4 MW(e)

Net plant efficiency 52.1% 52.7%

Net heat rate 6,946 kJ/kWh 6,898 kJ/kWh

Number of gas turbines 1 2

� Maximized uptime

� High efficiency

� Low emissions

Power generation: 38.1 MW(e)Mechanical drive: 39.3 MW

O&G mechanical drive package for on- or offshore applications – also as single lift

Power generation package – also available as single lift

Note: All combined cycle is based on 2 pressure, no reheat. Dimensions exclude inlet filter housing and exhaust stack. For power generation, AC generator is included. For mechanical drive, driven equipment is excluded.


5.

References


Thanks to its wide fuel range capability and design features, the SGT-700 is a perfect choice for several onshore applications: Industrial power generation, oil and gas power generation, and mechanical drive applications.

It performs well in combined cycle plants and combined heat and power plants.

The SGT-700 gas turbine is an evolution of the proven SGT-600 and is specifically designed for higher power output. It offers easy on-site or off-site maintenance and operates with a wide range of gaseous and liquid fuels on Dry Low Emission (DLE).

More than 70 units have been sold with 1.2 million equi valent operating hours, and 78,000 equivalent operating hours for the fleet-leading gas turbine.

Three SGT-700 packages for mechanical drive

Tianjin Bohai, China

Onshore simple cycle propane dehydrogenation (PDH) plantCustomer: Tianjin Bohai Chemical Industry GroupScope: 2 × SGT-700 gas turbines and 2 × axial flow compressors

Pinghu/Satellite Energy 450 KTA, China

Onshore simple cycle propane dehydrogenation (PDH) plant Customer: Zhejiang Satellite Energy Co., LtdScope: 1 x SGT-700 gas turbine coupled with 1 x 25 MW compressor

6.

� Robust, reliable design

� High fuel flexibility

� Low emissions


Maintainable, reliable, and robust twin-shaft design for mechanical drive and power generation

For both power generation and mechanical drive package, the driver is the same



Fuel Natural gas, liquid fuel, dual fuel Natural gas, liquid fuel, dual fuel

Frequency 50/60 Hz





Exhaust gas flow 95 kg/s 95 kg/s

Exhaust temperature 533 °C (991 °F) 533 °C (991 °F )

NOx emissions ≤ 15 ppmvd at 15% O2 on fuel gas (with DLE) ≤ 15 ppmvd at 15% O2 on fuel gas (with DLE)

Physical dimensions


Approx. weight 169,000 kg (372,581 lb) 63,000 kg (138,891 lb)

Length 18.8 m (61.68 ft) 11.7 m (38.38 ft)

Width 4.6 m (15.09 ft) 4.0 m (13.12 ft)

Height 5.8 m (19.03 ft) 5.8 m (19.03 ft)



SCC-700 1 × 1 SCC-700 2 × 1

Net power output 45.2 MW 91.6 MW






7.

References

SGT-600 installation for both mechanical drive and power generation


High reliability and availability in combination with good fuel flexibility and third-generation DLE makes the SGT-600 a perfect choice for several onshore applications: Industrial power generation, oil and gas power generation, and mechanical drive applications. Within the IPG applications, the turbine performs well in combined heat and power plants and combined cycle plants.

The industrial gas turbine combines a robust, reliable design with high fuel flexibility and low emissions.

More than 330 units have been sold with over 9 million equi valent operating hours, and 185,000 equivalent ope rating hours for the fleet-leading gas turbine.

Bahia Blanca, Argentina

Combined heat and powerCustomer: Profertil S.A.Scope: 1 x SGT-600 gas turbine, STC-GV (80-6) compressor, generator, NEM heat recovery steam generator

Tiszaújváros, Hungary

Combined cycle power plantCustomer: TVK LtdScope: 1 x SGT-600 gas turbine and 1 x SST-700 steam turbine

8.

Maintainable, reliable, and robust twin-shaft design for mechanical drive and power generation


� High fuel flexibility

� Low emissions


For both power generation and mechanical drive package, the driver is the same




Fuel Natural gas, liquid fuel, dual fuel Natural gas, liquid fuel, dual fuel

Frequency 50/60 Hz





Exhaust gas flow 81.3 kg/s 81.3 kg/s

Exhaust temperature 543 °C (1,009 °F) 543 °C (1,009 °F)


Physical dimensions



Length 18.8 m (61.68 ft) 11.7 m (38.38 ft)

Width 4.6 m (15.09 ft) 4.0 m (13.12 ft)

Height 5.8 m (19.03 ft) 5.8 m (19.03 ft)



SCC-600 1 × 1 SCC-600 2 × 1

Net power output 35.9 MW(e) 73.3 MW(e)





9.

References


Combining high overall efficiency and low maintenance costs with long intervals between overhauls, the SGT-500 is positioned well for oil and gas power generation and mechanical drive applications both onshore and offshore.

In addition to its proven, robust, and reliable design, the SGT-500 has excellent fuel flexibility with the capability of

burning heavy fuel oils (HFO), naphtha, and hydrogen gases.

More than 175 units have been sold with over 9 million equivalent operating hours.

Two SGT-500 installations on an FPSO

BUA Okpella cement plant, Nigeria

Simple cycle power plantCustomer: BUA International Ltd.Scope: 3 × SGT-500 gas turbines

High returns thanks to low investment and operating costs, excellent fuel flexibility, fuel changeover on load

10.

� Fuel flexibility

� Proven design

� Easily maintained




Fuel Natural gas, liquid, dual, HFO, crude oil Natural gas, liquid, dual, HFO, crude oil

Frequency 50/60 Hz






Exhaust temperature 369 °C (697 °F) 369 °C (697 °F)


SGT-500 core engine – proven and robust design SGT-500 offshore package – compact and easily maintained

Physical dimensions



Length 20.6 m (67.6 ft) 14.1 m (46 ft)

Width 4.0 m (13.1 ft) 4.0 m (13.1 ft)

Height 3.96 m (13 ft) 3.96 m (13 ft)Note: Dimensions exclude inlet filter housing and exhaust stack. For power generation, AC generator is included. For mechanical drive, driven equipment is excluded.


11.

References


The SGT-400 is a twin-shaft gas turbine available in two different power ratings for both power generation and mechanical drive applications.

The twin-shaft arrangement allows for commonality of parts in mixed-duty installations.

The gas turbine offers the highest efficiency in its power class, incorporating the latest aerodynamic and combustion technologies.

With over 25 years of operating experience, the SGT-400 is proven in both offshore and onshore applications. Over 300 units have been sold with approximately 3 million hours operating experience.

The SGT-400 is available as a factory-assembled package

Municipal utilities, Erlangen, Germany

Combined cycle cogenerationCustomer: Erlanger StadtwerkeScope: 1 x SGT-400 gas turbine and 1 x SST-300 steam turbine

Bulwer Island, Brisbane, Australia

Combined cycle power generationCustomer: AlstromScope: 2 × SGT-400 gas turbines

12.


13 MW version 15 MW version 13 MW version 15 MW version

Power output 12.9 MW(e) 14.3 MW(e) 13.4 MW 14.9 MW

Fuel Natural gas, liquid fuel, dual fuel; other fuels on request; automatic changeover from primary to secondary fuel at any load

Frequency 50/60 Hz 50/60 Hz

Gross efficiency 34.8% 35.4% 36.2% 36.8%

Heat rate 10,355 kJ/kWh 10,178 kJ/kWh 9,943 kJ/kWh 9,774 kJ/kWh

Turbine speed 9,500 rpm 9,500 rpm 9,500 rpm 9,500 rpm

Pressure ratio 16.8 : 1 18.9 : 1 16.8 : 1 18.9 : 1

Exhaust gas flow 39.4 kg/s 44.3 kg/s 39.4 kg/s 44.0 kg/s

Exhaust temperature 555 °C (1,031 °F) 540 °C (1,004 °F) 555 °C (1,031 °F) 540 °C (1,004 °F)


� Latest aerodynamic and combustion technology

� Suitable for all climates, onshore and offshore

� High power-to-weight ratio

Power generation: 12.9/14.3 MW(e)Mechanical drive: 13.4/14.9 MW

Twin-shaft design for both power generation and mechanical drive applications Compact power generation package design

Physical dimensions



Length 14.0 m (46 ft) 7.3 m (24 ft)

Width 3.1 m (10 ft) 3.1 m (10 ft)



13.

References


The SGT-300 industrial gas turbine has a rugged industrial design that enables high efficiency, reliability, and excellent emissions performance in a broad spectrum of applications for both power generation and mechanical drive.

The gas turbine is a proven unit for all electrical power generation and cogeneration applications.

It operates on a wide range of gaseous and liquid fuels. The compact arrangement, on-site or off-site maintainability, and inherent reliability of the SGT-300 make it an ideal gas turbine for the demanding oil and gas industry.

The SGT-300 twin-shaft version is used for mechanical drive

Over 140 units have been sold, with more than 4.5 million equivalent operating hours.

14.

� Low maintenance requirements

� Low emissions

� Single-shaft version for power generation, twin-shaft version for mechancial drive applications


Twin-shaft design – evolutionary design focused on reliability SGT-300 gas turbine package design




Frequency 50/60 Hz






Exhaust temperature 542 °C (1,008 °F) 498 °C (924 °F)


Physical dimensions



Length 11.8 m (38.55 ft) 6.9 m (22.64 ft)

Width 2.9 m (9.35 ft) 2.9 m (9.35 ft)

Height 3.5 m (11.48 ft) 3.9 m (12.76 ft)Note: Dimensions exclude inlet filter housing and exhaust stack. For power generation, AC generator is included. For mechanical drive, driven equipment is excluded.


15.

References


The rugged and compact SGT-200 gas turbine is available as a single-shaft version for power generation, and as a twin-shaft turbine for mechanical drive.

The gas turbine operates with various gaseous and liquid fuels. It provides high efficiency and an excellent power-to-weight ratio and is available as a factory-assembled package.

The SGT-200 gas turbine combines simple design with state-of-the-art technology and is ideally suited for use, for example, as a compressor drive.

More than 430 units have been sold with more than 30 million equivalent operating hours.

Rapid core engine exchange for minimized downtime

Mining industry, Jingdezhen, China

Combined heat and powerCustomer: Jingdezhen Coking Industry Group Co. Ltd.Scope: 2 × SGT-200 1S gas turbines packaged by ZNGT

Reduced CO2 emissions, lower operating and production costs

16.


� Flexible fuel capability

� Single-shaft and twin-shaft options available


SGT-200 industrial gas turbine Shop-tested and certified fluid system modules, fully wired and with onskid controls




Frequency 50/60 Hz

Gross efficiency 31.5% 33%





Exhaust temperature 466 °C (871 °F) 493 °C (919 °F)


Physical dimensions



Length 12.5 m (41 ft) 10.4 m (34 ft)

Width 2.4 m (8 ft) 2.4 m (8 ft)



17.

References


The SGT-100 industrial gas turbine is a proven unit for all electrical power generation and mechanical drive applications. The compact arrangement, on-site or off-site maintainability, and inherent reliability make it an ideal gas turbine for the demanding oil and gas industry.

The gas turbine has a rugged industrial design that enables high efficiency and excellent emissions performance on a wide range of gaseous and liquid fuels.

More than 410 units have been sold with more than 24 million operating hours. The lead package has over 120,000 equivalent hours of operation.

The SGT-100 combines advanced technology with robust construction

Girvan, Scotland, UK

Combined heat and powerCustomer: William Grant & Sons distilleryScope: 1 x SGT-100 gas turbine cogeneration package

Able to provide its production process with steam and electricity, and also to supply electricity for the region

18

Common modular package design for mechanical drive applications


5.1 MW version 5.4 MW version

Power output 5.1 MW(e) 5.4 MW(e) 5.7 MW


Frequency 50/60 Hz 50/60 Hz

Gross efficiency 30.2% 31.0% 32.9%

Heat rate 11,914 kJ/kWh 11,613 kJ/kWh 10,948 kJ/kWh

Turbine speed 17,384 rpm 17,384 rpm 13,000 rpm

Pressure ratio 14.0 : 1 15.6 : 1 14.9 : 1

Exhaust gas flow 19.5 kg/s 20.6 kg/s 19.7 kg/s

Exhaust temperature 545 °C (1,013 °F) 531 °C (988 °F) 543 °C (1,009 °F)


� Robust and reliable product

� Wide range of gaseous and liquid fuels

� Single-shaft version for power generation or twin-shaft version for mechanical drive applications

Power generation: 5.1/5.4 MW(e)Mechanical drive: 5.7 MW

Note: Dimensions exclude inlet filter housing and exhaust stack. For power generation, AC generator is included. For mechanical drive, driven equipment is excluded.

Robust, reliable, maintainable single-shaft version for power generation applications

Common modular package design for power generation

Physical dimensions



Length 11.0 m (36.09 ft) 6.1 m (20.01 ft)

Width 2.9 m (9.35 ft) 2.9 m (9.35 ft)

Height 3.6 m (11.81 ft) 3.6 m (11.81 ft)


siemens industrial gas turbines - · pdf filesiemens industrial gas turbines ... 4 to 6 mw 8...

Documents