Eurosmart siren

Eurosmart Siren• 20 - 200W variable output • Up to 8 built in switched outputs• Class D design• Programmable output to match speaker.• Compact size• Works with Eurosmart switch units or stand alone• 12 or 24V operation

The Eurosmart siren amplifier holds a large library of siren tones and can drive a wide selection of different speaker combinations. The Siren output is programmed to suit the required speaker quantity and wattage, it is protected to prevent damage to the Eurosmart siren amplifier in the event of an external short circuit. The unit includes many advanced functions such as an interlock to ensure the siren can only be activated when a designated beacon is also operating. Additionally full data logging facilities are available. Horn ring transfer control is also included allowing the siren to be started and stopped as well as the tone changed via the vehicle horn.

Units are supplied as standard as either 12 or 24V, but this can be altered by the user if required by changing internal switch settings.

All Haztec Eurosmart handsets and switch panels are compatible with the Eurosmart siren. Alternatively the unit can operate as a stand alone siren controlled by the programmable inputs.4 programmable inputs are included that allow required functions to be controlled by simple low voltage signals if required. These could be used to start / stop siren, change tone, operate at reduced volume for night time use, activate a low volume system test etc.

Up to 8 x 10A rated switched outputs can be included, offering the same functionality as the 8-82718 switch module but without the need for a separate external device.

In addition to the programmable output settings, the class D design of the new Eurosmart siren also results in a compact lightweight design.A cooling fan is fitted to the unit to ensure reliable operation even in the event of prolonged operation in elevated ambient temperatures.2 Radio rebroadcast inputs are provided as standard

8-82613-8 c/w 8 switched outputs

Dimensions (mm) 131L x 125D x 44H

Order code Description8-82613 12V Eurosmart siren unit8-82613-2 12V Eurosmart siren unit c/w 2 outputs8-82613-4 12V Eurosmart siren unit c/w 4 outputs8-82613-8 12V Eurosmart siren unit c/w 8 outputs8-82613-24 24V Eurosmart siren unit8-82613-2-24 24V Eurosmart siren unit c/w 2 outputs8-82613-4-24 24V Eurosmart siren unit c/w 4 outputs8-82613-8-24 24V Eurosmart siren unit c/w 8 outputs

Programming SoftwareEurosmart systems can be supplied pre programmed to suit users precise needs or alternatively the Haztec Eurosmart software package can be used by the installer or maintenance engineer to configure and upgrade systems as required.

The software kit consists of PC software and a USB adaptor that allows the range of haztec Eurosmart handsets and devices to be connected a USB port on the PC.The software allows configuration of lightbar flash controllers, Eurosmart sirens and Eurosmart switching units. It can be used to assign any button to control any required siren or switching func-tion. Group buttons can also be created whereby pressing a single button automatically starts or cancels a number of other functions. e.g. pressing a response button can result in the lightbar, siren and grille lights all being activated.

Any of the above controllers will plug directly into the 8-82613 and control all tones and switched outputs as required. See

pages 2 - 5 for more information 7