sisukord - eesti standardikeskus · g/sps/n/usa/1089 5. juuli 2005 usa kaubandus-partnerid ......
TRANSCRIPT
SISUKORD HARMONEERITUKS TUNNISTATUD STANDARDID.......................................................................2 WTO SEKRETARIAADILT SAABUNUD SPS TEATISED ..................................................................3 WTO SEKRETARIAADILT SAABUNUD TBT TEATISED .................................................................9 UUED STANDARDID JA KAVANDID ARVAMUSKÜSITLUSEKS ..................................................15 ICS PÕHIRÜHMAD..................................................................................................................................16 01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOON ..............17 03 TEENUSED. ETTEVÕTTE ORGANISEERIMINE, JUHTIMINE JA KVALITEET.
HALDUS. TRANSPORT. SOTSIOLOOGIA.....................................................................................18 07 MATEMAATIKA. LOODUSTEADUSED..........................................................................................19 11 TERVISEHOOLDUS ...........................................................................................................................19 13 KESKKONNA- JA TERVISEKAITSE. OHUTUS..............................................................................20 17 METROLOOGIA JA MÕÕTMINE. FÜÜSIKALISED NÄHTUSED ................................................25 19 KATSETAMINE...................................................................................................................................26 23 ÜLDKASUTATAVAD HÜDRO- JA PNEUMOSÜSTEEMID JA NENDE OSAD...........................26 25 TOOTMISTEHNOLOOGIA ................................................................................................................28 27 ELEKTRI JA SOOJUSENERGEETIKA..............................................................................................29 29 ELEKTROTEHNIKA...........................................................................................................................30 31 ELEKTROONIKA................................................................................................................................33 33 SIDETEHNIKA ....................................................................................................................................34 35 INFOTEHNOLOOGIA. KONTORISEADMED..................................................................................35 43 MAANTEESÕIDUKITE EHITUS.......................................................................................................37 45 RAUDTEETEHNIKA...........................................................................................................................37 47 LAEVAEHITUS JA MERE-EHITISED ..............................................................................................38 49 LENNUNDUS JA KOSMOSETEHNIKA ...........................................................................................38 53 TÕSTE- JA TEISALDUSSEADMED..................................................................................................47 59 TEKSTIILI- JA NAHATEHNOLOOGIA ............................................................................................48 61 RÕIVATÖÖSTUS ................................................................................................................................48 65 PÕLLUMAJANDUS ............................................................................................................................48 67 TOIDUAINETE TEHNOLOOGIA ......................................................................................................49 71 KEEMILINE TEHNOLOOGIA ...........................................................................................................50 75 NAFTA JA NAFTATEHNOLOOGIA .................................................................................................51 77 METALLURGIA ..................................................................................................................................52 79 PUIDUTEHNOLOOGIA......................................................................................................................53 81 KLAASI- JA KERAAMIKATÖÖSTUS ..............................................................................................53 83 KUMMI- JA PLASTITÖÖSTUS .........................................................................................................54 85 PABERITEHNOLOOGIA....................................................................................................................55 87 VÄRVIDE JA VÄRVAINETE TÖÖSTUS..........................................................................................55 91 EHITUSMATERJALID JA EHITUS ...................................................................................................55 93 RAJATISED..........................................................................................................................................59 97 OLME. MEELELAHUTUS. SPORT ...................................................................................................60 STANDARDITE TÕLKED KOMMENTEERIMISEL.............................................................................63 STANDARDITE MÜÜGI TOP JUULI.....................................................................................................67 JUULIKUUS EESTI KEELES MÜÜGILE SAABUNUD STANDARDID.............................................68
1
HARMONEERITUKS TUNNISTATUD STANDARDID
Tehnilise normi ja standardi seaduse muutmise seaduse (RT I 2002, 32, 186) kohaselt avaldab Eesti Standardikeskus oma veebilehel ja väljaandes teavet harmoneeritud standarditest. Harmoneeritud (ühtlustatud) standardid on EL Uue lähenemisviisi direktiividega liituvad standardid. Harmoneeritud standarditeks loetakse need standardid, millele on viidatud EL ametlikus väljaandes Official Journal. Harmoneeritud standardite kasutamine on kõige lihtsam viis tõendada direktiivide oluliste nõuete täitmist. Lisainfo http://www.newapproach.org/ .
EVS Teatajas ja EVS kodulehel saab tutvuda Uue lähenemisviisi direktiivide all harmoneeritud standarditega. Ühtlasi avaldame ka, millised neist standarditest on üle võetud Eesti standarditeks. Seekord on avaldatud aktiivsete siirdatavate meditsiinivahendite ja gaasiseadmete standardid (avaldatud juuni 2005 Euroopa Ühenduste Teataja C-seerias). Kõik seekord avaldatud standardid on üle võetud Eesti standarditeks
NÕUKOGU DIREKTIIV 90/385/EMÜ Aktiivsed siirdatavad meditsiinivahendid (2005/C 153/08)
24.06.2005 Viidatud standardi tähis
Standardi pealkiri
EN 556-1:2001 Meditsiiniseadmete steriliseerimine. Nõuded meditsiiniseadmetele, mis on märgistatud sõnaga "STERIILNE". Osa 1: Nõuded lõplikult steriliseeritud meditsiiniseadmetele / Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devices
EN 556-2:2003 Meditsiinitarvikute steriliseerimine. Nõuded meditsiinitarvikutele vastavuseks märgistusele "Steriilne". Osa 2: Nõuded aseptiliselt töödeldud meditsiinitarvikutele / Sterilization of medical devices - Requirements for medical devices to be designated STERILE - Part 2: Requirements for aseptically processed medical devices
EN ISO 10993-1:2003 Meditsiiniseadmete bioloogiline hindamine. Osa 1: Hindamine ja katsetamine / Biological evaluation of medical devices - Part 1: Evaluation and testing
EN ISO 10993-12:2004 Meditsiiniseadmete bioloogiline hindamine. Osa 12: Proovieksemplari ettevalmistamine ja etalonained / Biological evaluation of medical devices - Part 12: Sample preparation and reference materials
EN ISO 13485:2003 Meditsiiniseadmed. Kvaliteedijuhtimissüsteem. Reguleerivad sätted / Medical devices - Quality management systems - System requirements for regulatory purposes
EN 13824:2004 Meditsiiniseadmete steriliseerimine. Vedelate meditsiiniliste seadmete aseptiline töötlemine. Nõuded / Sterilization of medical devices - Aseptic processing of liquid medical devices - Requirements
EN ISO 14971:2000/A1:2003 Meditsiinivahendid. Riskijuhtimise rakendamine meditsiinivahenditele. Muudatus 1: Lisa H: Nõuete põhjendus / Medical devices - Application of risk management to medical devices - Amendment 1: Annex H - Rationale for requirements
2
NÕUKOGU DIREKTIIV 90/396/EMÜ Gaasiseadmed (2005/C 142/04)
11.06.2005 Viide harmoneeritud standardile
Standardi pealkiri Kuupäev, mil asendatava standardi järgimisest tulenev vastavuseeldus kaotab kehtivuse
EN 509:1999/A2:2004 Dekoratiivsed kütuseefektiga gaasiseadmed / Decorative fuel- effect gas appliances
30.6.2005
EN 13611:2000/A1:2004 Gaasipõletite ja gaasikütteseadmete ohutus- ja juhtseadmed . Üldnõuded / Safety and control devices for gas burners and gas-burning appliances - General requirements
30.6.2005
WTO SEKRETARIAADILT SAABUNUD TEATISED Maailma Kaubandusorganisatsiooni WTO sekretariaadilt saabunud õigusaktide eelnõud, milles sisalduvad tehnilised normid võivad saada kaubanduse tehnilisteks tõketeks. Eelnõude kohta on võimalik esitada kommentaare 2 nädalat enne tabelis toodud kuupäeva Majandus- ja Kommunikatsiooniministeeriumi Karl Stern, [email protected]. Eelnõude terviktekstid ja info EVS Teabekeskusest Signe Ruut tel 605 5062, faks 605 5063, [email protected].
WTO SEKRETARIAADILT SAABUNUD SPS TEATISED
NUMBER &ESITAMIS-KUUPÄEV
RIIK
M
ÕJU
TATA
VPI
IRK
ON
D/
RII
K TOODE
EESMÄRK
KOMMEN-TAARIDE ESITAMISE VIIMANE KUUPÄEV
G/SPS/N/SLV/65 4. juuli 2005
SLOVEENIA kõik kaubandus-
partnerid
juust (HS 0406)
toiduohutus 60 päeva
G/SPS/N/SLV/66 5. juuli 2005
EL SALVADOR kaubandus-partnerid
valminud juust (HS 0406)
toiduohutus 60 päeva
G/SPS/N/SLV/67 5. juuli 2005
EL SALVADOR kaubandus-partnerid
toorjuust (HS 0406)
toiduohutus/ taimekaitse
60 päeva
G/SPS/N/USA/1089 5. juuli 2005
USA kaubandus-partnerid
vitamiin D3toidulisandina
toiduohutus -
G/SPS/N/CAN/247 7. juuli 2005
KANADA - dieetjoogid (ICS: 67.040)
toiduohutus -
3
G/SPS/N/CRI/41 7. juuli 2005
COSTA RICA kõik kaubandus-partnerid
margariin (HS1517.10.00)
toiduohutus/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest
60 päeva
G/SPS/N/ARE/7 8. juuli 2005
ARAABIA ÜHEND-
EMIRAADID
- palmipuud ja seemikud
taimekaitse -
G/SPS/N/CHL/189 8. juuli 2005
TŠIILI Euroopa Ühendused
maasikate paljundusmaterjal
taimekaitse -
G/SPS/N/CHL/190 8. juuli 2005
TŠIILI Peruu avokaadod taimekaitse -
G/SPS/N/SGP/30 8. juuli 2005
SINGAPUR kõik riigid eluslinnud loomatervis/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest
29. august 2005
G/SPS/N/IND/ 22, 23
12. juuli 2005
INDIA kõik kaubandus-partnerid
toit toiduohutus -
G/SPS/N/NZL/327 12. juuli 2005
UUS MEREMAA
USA –Idaho, Oregon ja
Washington
kirsid (Prunus avium)
taimekaitse 5. september 2005
G/SPS/N/PER/98 12. juuli 2005
PERUU kõik riigid kahjurite nimekiri (01.06.90.90.00, 03.07.60.00.00, 05.11.99.10.00)
taimekaitse/ territooriumi
kaitsmine kahjurite eest
5. september 2005
G/SPS/N/SLV/68 12. juuli 2005
EL SALVADOR kaubandus-partnerid
margariin (HS 1517)
toiduohutus 60 päeva
G/SPS/N/TPKM/55 15. juuli 2005
TAIWANI, PENGHU,
KINMENI JA MATSU
ERALDI TOLLI-TERRI-
TOORIUM
- pudelivesi toiduohutus 31. august 2005
G/SPS/N/CAN/248 15. juuli 2005
KANADA - atseetamipriid (ICS: 65.100,
67.040)
toiduohutus 22. september 2005
G/SPS/N/KOR/187 15. juuli 2005
KOREA VABARIIK
kaubandus-partnerid
karantiini alla käivad loomad ja loomsed tooted
toiduohutus/ loomatervis/
inimeste kaitsmine
looma-/taime-
kahjurite või haiguste eest
60 päeva
4
G/SPS/N/NPL/1 15. juuli 2005
NEPAAL kõik riigid erinevad tooted taimekaitse/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest / territooriumi
kaitsmine kahjurite eest
2. september 2005
G/SPS/N/PER/99 15. juuli 2005
PERUU Tšiili männipuit (4403.20.00.00, 4404.10.00.00, 4407.10.90.00, 4408.10.90.00, 4409.10.10.00,
4409.10.20.00 ja 4409.10.90.00)
taimekaitse -
G/SPS/N/PER/100 15. juuli 2005
PERUU kõik riigid juurvili (1401.10.00.00, 1401.20.00.00 ja 1401.90.00.00)
taimekaitse -
G/SPS/N/PER/101 15. juuli 2005
PERUU kõik riigid turvas (2703.00.00.00)
taimekaitse -
G/SPS/N/PER/102 15. juuli 2005
PERUU USA ja Boliivia
puuvillast lõnga- jäägid
(5202.10.00.00) ja kuivad viljakestad (1213.00.00.00)
taimekaitse -
G/SPS/N/PER/103 15. juuli 2005
PERUU Sri Lanka põhk (4601.91.00.00 ja 5305.90.00.00)
taimekaitse -
G/SPS/N/PER/104 15. juuli 2005
PERUU Indoneesia, Brasiilia ja
Jaapan
pähklid (0801.21.00.00, 0801.22.00.00 ja 0908.10.00.00)
taimekaitse -
G/SPS/N/PER/105 18. juuli 2005
PERUU USA, Brasiilia ja Paraguai
värskelt lõigatud orhideelised
(0603.10.90.10)
taimekaitse -
G/SPS/N/PER/106 18. juuli 2005
PERUU USA kuivatatud männipähklid
(0802.90.00.00) ja datlid
(0804.10.00.00)
taimekaitse -
5
G/SPS/N/PER/107 18. juuli 2005
PERUU erinevad riigid teatud seemned ja teravili
(1207.40.90.00, 0909.10.00.00, 1006.30.00.00, 0713.10.90.10, 0713.10.90.20, 1404.10.10.00, 1008.30.00.00, 1003.00.90.00, 1207.60.90.00, 0909.30.00.00, 0713.33.91.00, 0713.33.92.00, 0713.33.99.00, 0713.20.90.00, 1007.00.90.00, 1008.20.00.90, 1207.50.90.00, 1008.90.10.90,
1207.99.90.00 ja 2309.90.90.00)
taimekaitse -
G/SPS/N/PER/108 18. juuli 2005
PERUU Ekvador maniokk/kassaava (0714.10.00.00) ja värsked tomatid (0702.00.00.00)
taimekaitse -
G/SPS/N/PER/109 18. juuli 2005
PERUU Kuuba, Iisrael, Nikaragua ja Dominikaani
Vabariik
papaiaseemned (1209.99.10.00)
taimekaitse -
G/SPS/N/PER/110 18. juuli 2005
PERUU Šveits, Taani ja Holland
koresöödataimede seemned
(1209.21.00.00, 1209.22.00.00, 1209.23.00.00, 1209.24.00.00, 1209.25.00.00,
1209.26.00.00 ja 1209.29.00.00)
taimekaitse -
G/SPS/N/PER/111 18. juuli 2005
PERUU USA ja Ungari odraseemned (1003.00.10.00),
mais (1005.10.00.00) ja
nisu (1001.10.10.00 ja 1001.90.10.00)
taimekaitse -
G/SPS/N/PER/112 18. juuli 2005
PERUU Hispaania, Itaalia,
Holland ja USA
lupiiniseemned (1214.90.00.00),
päevalill (1206.00.10.00),
saialill (1209.30.00.00) ja
safloor (1207.60.10.00)
taimekaitse -
G/SPS/N/PER/113 18. juuli 2005
PERUU USA nuluseemned (1209.99.10.00)
taimekaitse -
6
G/SPS/N/PER/114 18. juuli 2005
PERUU Prantsusmaa Aafrika õlipalmi seemned
(1207.10.10.00) ja päevalill
(1206.00.90.00)
taimekaitse -
G/SPS/N/BRA/113 15. juuli 2005
BRASIILIA India in vivo kogutud veiseembrüod.
loomatervis -
G/SPS/N/BRA/114 15. juuli 2005
BRASIILIA kõik riigid kartuliseeme HS-6 Code:
0701.10. HS-8 Code: 0701.10.00
taimekaitse -
G/SPS/N/BRA/115 15. juuli 2005
BRASIILIA kõik riigid taimetooted musaceae ja
heliconiaceae
taimekaitse -
G/SPS/N/BRA/116 15. juuli 2005
BRASIILIA kõik riigid GMO sojaoad ja -seemned
taimekaitse -
G/SPS/N/BRA/117 15. juuli 2005
BRASIILIA kõik riigid taimetooted üldiselt taimekaitse -
G/SPS/N/ARG/77 19. juuli 2005
ARGENTIINA kaubandus-partnerid
põllumajandus-tooted
loomatervis 60 päeva
G/SPS/N/EEC/263 19. juuli 2005
EUROOPA ÜHENDUSED
EÜ liikmed või EÜ-sse eksportivad kolmandad
riigid
erinevad tooted toiduohutus/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest
60 päeva
G/SPS/N/PER/115 20. juuli 2005
PERUU kõik riigid riisiterad (1006.10.90.00, 1006.20.00.00 ja 1006.30.00.00)
toiduohutus -
G/SPS/N/PER/116 20. juuli 2005
PERUU Ekvador Hypericum (St. John's rohi) taimed (06.02.90.00.90)
taimekaitse -
G/SPS/N/PHL/77 20. juuli 2005
FILIPIINID Brasiilia veised loomatervis 31. august 2005
G/SPS/N/AUS/184 21. juuli 2005
AUSTRAALIA kõik riigid taimede seemned taimekaitse -
7
G/SPS/N/ECU/4 21. juuli 2005
EKVADOR Austria, Belgia, Kanada,
Tšehhi, Taani, Soome,
Prantsusmaa, Saksamaa,
Kreeka, Iirimaa,
Iisrael, Itaalia, Jaapan,
Liechtenstein, Luxembourg,
Holland, Poola,
Portugal, Slovakkia, Sloveenia, Hispaania,
Šveits, Ühendatud
Kuningriikl ja USA
loomahaiguste sisseveo
takistamine
loomatervis/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest
-
G/SPS/N/ECU/5 21. juuli 2005
EKVADOR kõik kaubandus-partnerid
puidust pakkematerjal
territooriumi kaitsmine
kahjurite eest
60 päeva
G/SPS/N/ECU/6 21. juuli 2005
EKVADOR kõik riigid pestitsiidid toiduohutus/ taimekaitse
60 päeva
G/SPS/N/USA/1090 21. juuli 2005
USA kaubandus-partnerid
lõikelilled taimekaitse 6. september 2005
G/SPS/N/PHL/78 22. juuli 2005
FILIPIINID USA veised, veiseliha ja sellest tooted
toiduohutus/ loomatervis
-
G/SPS/N/USA/1091 22. juuli 2005
USA kõik kaubandus-
partnerid
pestitsiide sisaldada võivad tooted
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
kahjurite või haiguste eest
11. oktoober 2005
G/SPS/N/USA/1092 22. juuli 2005
USA kõik kaubandus-
partnerid
melonid, viinamarjad ja
banaanid
toiduohutus/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest
12. september 2005
G/SPS/N/USA/1093 22. juuli 2005
USA kõik kaubandus-
partnerid
sojaoad, seemned toiduohutus/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest
12. september 2005
8
G/SPS/N/USA/1094 22. juuli 2005
USA kõik kaubandus-
partnerid
pestitsiidid toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
kahjurite või haiguste eest
6. september 2005
G/SPS/N/IND/ 24-30
25. juuli 2005
INDIA kõik kaubandus-
partnerid
toit ja töödeldud toit toiduohutus -
G/SPS/N/COL/101 26. juuli 2005
KOLUMBIA kaubandus-partnerid
piim (0401 ja 0402.10)
toiduohutus/ inimeste
kaitsmine looma-/taime-
kahjurite või haiguste eest
21. oktoober 2005
G/SPS/N/BRA/118 27. juuli 2005
BRASIILIA kõik riigid toit toiduohutus -
G/SPS/N/CHN/82 29. juuli 2005
HIINA kõik riigid elusloomad loomatervis 60 päeva
G/SPS/N/CHN/83 29. juuli 2005
HIINA kõik riigid töödeldud toit toiduohutus 60 päeva
G/SPS/N/EEC/265 29. juuli 2005
EUROOPA ÜHENDUSED
EÜ liikmed või EÜ-sse eksportivad kolmandad
riigid
dioksiinide, furaani ja dioksiinilaadsete PCB-de sisalduvus
toiduainetes
toiduohutus 60 päeva
G/SPS/N/EEC/267 29. juuli 2005
EUROOPA ÜHENDUSED
EÜ liikmed või EÜ-sse eksportivad kolmandad
riigid
kala, teised veeloomad ja
nendest tooted ning pooltooted (CN 23 01 20 ja CN 15 04)
camphechlor sisaldumine loomatoidus
toiduohutus/ loomatervis
60 päeva
G/SPS/N/KOR/188 29. juuli 2005
KOREA VABARIIK
kõik kaubandus-
partnerid
toit toiduohutus -
G/SPS/N/KOR/189 29. juuli 2005
KOREA VABARIIK
kõik kaubandus-
partnerid
pestitsiidid toiduohutus 20. september 2005
WTO SEKRETARIAADILT SAABUNUD TBT TEATISED
NUMBER &ESITAMIS-KUUPÄEV
RIIK
TOODE/KAUP/ TEENUS
EESMÄRK
KOMMEN-TAARIDE ESITAMISE VIIMANE KUUPÄEV
G/TBT/N/ARG/182 29. juuni 2005
ARGENTIINA pestitsiidid kodus kasutamiseks
tervisekaitse -
9
G/TBT/N/ARG/183 29. juuni 2005
ARGENTIINA isiklikud hügieenitooted, kosmeetika ja parfümeeria
muudatused seadusandluses
-
G/TBT/N/ARG/184 29. juuni 2005
ARGENTIINA ravimid muudatused seadusandluses
-
G/TBT/N/ARG/185 29. juuni 2005
ARGENTIINA isiklikud hügieenitooted, kosmeetika ja parfümeeria
muudatused seadusandluses
-
G/TBT/N/CHE/48 29. juuni 2005
ŠVEITS loomsed toiduained, kassi- ja koerakarvad ja
sellest tooted
loomakaitse ja tarbijate kaitsmine
31. august 2005
G/TBT/N/SLV/65 29. juuni 2005
EL SALVADOR toorjuust (HS 0406;
(ICS 67.100)
inimeste tervise kaitse
60 päeva
G/TBT/N/HND/15 1. juuli 2005
HONDURAS nõuded vedelgaasiballoonidele
tarbijakaitse 60 päeva
G/TBT/N/HND/16 1. juuli 2005
HONDURAS nõuded vedelgaasiballoone
vedavatele sõidukitele
inimeste ohutus; keskkonnakaitse
60 päeva
G/TBT/N/HND/18 1. juuli 2005
HONDURAS nõuded vedelgaasiballoonidele
inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/HND/19 1. juuli 2005
HONDURAS katsemeetodid vedelgaasiballoonidele
inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/HND/21 1. juuli 2005
HONDURAS vedelgaas inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/SLV/ 69, 70
1. juuli 2005
EL SALVADOR nõuded vedelgaasiballoonidele
tarbijakaitse 60 päeva
G/TBT/N/SLV/71 1. juuli 2005
EL SALVADOR vedelgaas inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/SLV/72 1. juuli 2005
EL SALVADOR nõuded vedelgaasiballoonidele
inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/SLV/73 1. juuli 2005
EL SALVADOR nõuded vedelgaasimahutitele
inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/SLV/74 1. juuli 2005
EL SALVADOR katsemeetodid vedelgaasimahutitele
inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/SLV/75 1. juuli 2005
EL SALVADOR vedelkütused (HS: 27.11;
ICS: 75.160.30).
inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/SLV/76 1. juuli 2005
EL SALVADOR vedela süsivesiniku transport
(HS 8704; (ICS 13.300)
inimeste ohutus ja keskkonnakaitse
60 päeva
G/TBT/N/USA/124 1. juuli 2005
USA boilerid (HS: 8419 ja 8404;
ICS: 27.060).
inimeste tervise kaitse
11. august 2005
10
G/TBT/N/USA/125 4. juuli 2005
USA laste turvasüsteemid (HS: 8703;
(ICS: 43.040)
inimeste elude kaitse 29. august 2005
G/TBT/N/USA/126 4. juuli 2005
USA alkohoolsed joogid (HS: 22) (ICS: 67)
pettuste ennetamine, tarbijakaitse
30. august 2005
G/TBT/N/USA/127 4. juuli 2005
USA õhusaaste (HS: 29;
ICS: 13.040)
keskkonnakaitse 15. august 2005
G/TBT/N/CHN/100 5. juuli 2005
HIINA tagasipeegeldavad märgistused
raskeveokitele ja nende järelhaagistele
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/CHN/101 5. juuli 2005
HIINA tagasipeegeldavad seadmed
mootorsõidukitele
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/CHN/102 5. juuli 2005
HIINA kuuldavad hoiatussignaalid
sõidukitele (signaal, pasun)
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/CHN/103 5. juuli 2005
HIINA mootorsõidukite pidurivoolikud
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/CHN/105 5. juuli 2005
HIINA mootorrataste tahavaatepeeglid
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/CHN/107 5. juuli 2005
HIINA mootorsõidukite tahavaatepeeglid
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/CHN/109 5. juuli 2005
HIINA mootorsõidukite kütusepaagid
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/CHN/111 5. juuli 2005
HIINA mootorsõidukite sõidusalvestusseadmed
inimeste tervise kaitse ja ohutus, keskkonnakaitse
60 päeva
G/TBT/N/EEC/89 5. juuli 2005
EUROOPA ÜHENDUSED
ühekordselt kasutatavad süütajad
ohutus lastele 60 päeva
G/TBT/N/CHN/104 6. juuli 2005
HIINA ukselukud inimeste elu ja tervise kaitse,
keskkonnakaitse
60 päeva
G/TBT/N/CHN/106 6. juuli 2005
HIINA valgustus- ja valgussignaalseadmed
mootorratastele
inimeste elu ja tervise kaitse,
keskkonnakaitse
60 päeva
G/TBT/N/CHN/110 6. juuli 2005
HIINA valgustus- ja valgussignaalseadmed
mootorsõidukitele
inimeste elu ja tervise kaitse,
keskkonnakaitse
60 päeva
G/TBT/N/CHN/112 6. juuli 2005
HIINA kaubalaevad inimeste elu ja tervise kaitse,
keskkonnakaitse
60 päeva
G/TBT/N/DNK/53 6. juuli 2005
TAANI kaubalaevad ohutus September 2005
G/TBT/N/SWE/51 6. juuli 2005
ROOTSI PFOS (perflourooctyl sulphonic derivative)
kasutuskeeld 5. oktoober 2005
G/TBT/N/BRA/178 7. juuli 2005
BRASIILIA ohtlike toodete transpordikonteinerid
keskkonnakaitse 17. august 2005
11
G/TBT/N/BRA/179 7. juuli 2005
BRASIILIA In-vitro diagnostilised tooted
(HS 3822; 3002; 3821)
inimeste tervise kaitse
-
G/TBT/N/BRA/180 7. juuli 2005
BRASIILIA kraadiklaasid (HS: 902511)
inimeste tervise kaitse
15. august 2005
G/TBT/N/EST/1 7. juuli 2005
EESTI toit (märgistamine) tarbijate informeerimine
60 päeva
G/TBT/N/JPN/152 7. juuli 2005
JAAPAN elektriline riisikeetja (HS: 8516.79 );
vedelkristallteler ja plasmateler
(HS: 8528 ); DVD (HS: 8521 )
energiasäästlikkus 8. september 2005
G/TBT/N/KEN/14 7. juuli 2005
KEENIA erinevad tooted inimeste elude kaitsmine, ohutus ja
keskkonnakaitse
60 päeva
G/TBT/N/KOR/94 7. juuli 2005
KOREA VABARIIK
ökotooted tarbijainfo. 60 päeva
G/TBT/N/SWE/52 7. juuli 2005
ROOTSI GBL and 1,4-butanediol
Rootsi klassifitseerib GBL ja 1,4
butanedioli tervisele ohtlikuks (teatised
G/TBT/N/SWE/47 ja G/TBT/N/SWE/48),
müük ja import erilubadega
14. september 2005
G/TBT/N/SWE/53 7. juuli 2005
ROOTSI 3,4-methylenedioxymethcathinone (methylone);
4-acetoxy-N,N-methylisopropyltryptamine (4-AcO-MIPT);
4-hydroxy-N,N-diethyltryptamine (4-
HO-DET); 4-hydroxy-N,N-
methylisopropyltryptamine (4-HO-MIPT) and 4-acetoxy-N,N-
diethyltryptamine (4-AcO-DET).
ohtlikud ained, vajalikud eriload
15. september 2005
G/TBT/N/THA/175 8. juuli 2005
TAI mitmesugused kodutarbed (HS 3605;
ICS: 97.180)
ohutus 60 päeva
G/TBT/N/USA/128 8. juuli 2005
USA DTV tuuner (HS 8528;
ICS: 33.160)
tarbijakaitse -
G/TBT/N/USA/129 8. juuli 2005
USA juveelitooted (HS 7116;
ICS 39.060)
tarbijakaitse 28. september 2005
G/TBT/N/BRA/181 12. juuli 2005
BRASIILIA geneetiliselt muudetud organisme sisaldavad
toidud
inimeste tervise kaitse
17. august 2005
G/TBT/N/BRA/182 12. juuli 2005
BRASIILIA pingeseadmed (HS 9032)
tarbijate ohutus 15. august 2005
12
G/TBT/N/SWE/54 12. juuli 2005
ROOTSI tuleohutustooted harmoneerimine EL seadusandlusega
12. september 2005
G/TBT/N/SWE/55 12. juuli 2005
ROOTSI kokkupandavad elamud nõuded 12. september 2005
G/TBT/N/JOR/2 13. juuli 2005
JORDAANIA sigaretid (HS: 2404;
ICS: 65.160)
tervisekaitse 31. august 2005
G/TBT/N/USA/130 13. juuli 2005
USA sisepõlemismootorid (HS: 8408;
ICS: 13.040)
inimeste tervise kaitse
9. september 2005
G/TBT/N/CAN/ 134, 135
14. juuli 2005
KANADA toksilised ained (ICS: 13.020)
inimeste tervise ja keskkonnakaitse
7. september 2005
G/TBT/N/CAN/136 14. juuli 2005
KANADA õhusõidukid (ICS: 49.020)
rahvuslik julgeolek 22. september 2005
G/TBT/N/GTM/26 15. juuli 2005
GUATEMALA kohustuslikud nõuded vedelgaasi (LPG)
transpordiks (HS: 8704)
(ICS:13.300)
inimeste ohutus ja keskkonnakaitse
60 päeva
G/TBT/N/GTM/ 27, 28
15. juuli 2005
GUATEMALA kohustuslikud nõuded vedelkütustele
(HS: 2710) (ICS: 75.160.20)
inimeste elu ja tervise kaitse,
keskkonnakaitse
60 päeva
G/TBT/N/GTM/29 15. juuli 2005
GUATEMALA kohustuslikud nõuded vedela süsivesiniku transpordiks (ICS:
13.300)
inimeste ohutus ja keskkonnakaitse
60 päeva
G/TBT/N/USA/131 18. juuli 2005
USA pestitsiidid (HS: 3808;
ICS: 13)
keskkonnakaitse 11. oktoober 2005
G/TBT/N/USA/132 18. juuli 2005
USA inimesekujulised katseseadmed
(HS: 8703; ICS: 43)
inimeste elude kaitse 12. september 2005
G/TBT/N/USA/133 18. juuli 2005
USA mootorsõidukite kaitseseadmed
(HS: 8703; ICS: 43).
inimeste ohutus 17. august 2005
G/TBT/N/USA/ 134, 135
18. juuli 2005
USA ravimid (HS: 30; ICS: 11.120)
inimeste elude kaitse 10. november 2005
G/TBT/N/BRA/183 20. juuli 2005
BRASIILIA kala, molluskid ja koorikloomad
(HS 0303, 0304.20, 0306.1, 0307)
pettuste ennetamine 30. august 2005
G/TBT/N/BRA/184 20. juuli 2005
BRASIILIA kinnispakis jäätis (HS 2105)
pettuste ennetamine 30. august 2005
G/TBT/N/ISR/107 20. juuli 2005
IISRAEL betoontooted (ICS: 91.100.30;
HS: 6810.91)
tarbijaohutus 60 päeva
G/TBT/N/CAN/137 21. juuli 2005
KANADA bensiin (ICS: 75.160.20,
13.020.040, 13.040.50)
keskkonnakaitse
G/TBT/N/CHE/49 21. juuli 2005
ŠVEITS raadiosideseadmed muudatused seadusandluses
15. september 2005
13
G/TBT/N/GTM/ 31, 32, 34
21. juuli 2005
GUATEMALA kohustuslikud nõuded vedelgaasiballoonidele
(HS: 8481; ICS: 23.060.40)
inimeste elu ja tervise kaitse,
keskkonnakaitse
60 päeva
G/TBT/N/GTM/33 21. juuli 2005
GUATEMALA rumm (ICS: 67.160.10)
kohustuslikud nõuded 60 päeva
G/TBT/N/ISR/108 21. juuli 2005
IISRAEL keraamilised plaadid (ICS: 91.100.23;
HS: 69)
tarbijakaitse ja ohutus 60 päeva
G/TBT/N/TPKM/21 21. juuli 2005
TAIWANI, PENGHU,
KINMENI JA MATSU ERALDI
TOLLI-TERRITOORIUM
verepreparaadid tervisekaitse 60 päeva
G/TBT/N/USA/136 21. juuli 2005
USA diislikütus (HS: 2710;
ICS: 13.040)
keskkonnakaitse 15. august 2005
G/TBT/N/COL/67 25. juuli 2005
KOLUMBIA piim inimeste tervise kaitse ja
tarbijapettuste ennetamine
21. oktoober 2005
G/TBT/N/ARG/189 28. juuli 2005
ARGENTIINA videomängud tarbijainfo -
G/TBT/N/CHN/113 28. juuli 2005
HIINA koristusseadmed (ICS: 65.060.50;
HS: 8433)
inimeste tervise kaitse
60 päeva
G/TBT/N/CHN/114 28. juuli 2005
HIINA kraanad (ICS: 53.020.20;
HS: 8426)
keskkonnakaitse 60 päeva
G/TBT/N/CHN/115 28. juuli 2005
HIINA M1 ja N1 sõidukid. (ICS: 43)
ohutus 60 päeva
G/TBT/N/CHN/116 28. juuli 2005
HIINA autod (ICS: 43) ohutus 60 päeva
G/TBT/N/CHN/117 28. juuli 2005
HIINA M ja N kategooria mootorsõidukid
(ICS: 43)
ohutus 60 päeva
G/TBT/N/CHN/118 28. juuli 2005
HIINA M1 ja teised sama tüüpi
vedelkütusepaagiga sõidukid (ICS: 43)
ohutus 60 päeva
G/TBT/N/GBR/12 28. juuli 2005
ÜHENDATUD KUNINGRIIK
mahuga üle 35 cl müügipakendid, mis
sisaldavad kanget alkoholi või veini
märgistusnõuded 90 päeva
G/TBT/N/ROU/ 1-3
28. juuli 2005
RUMEENIA õlu (ICS: 67.160.10)
inimeste ohutus 60 päeva
G/TBT/N/ROU/4 28. juuli 2005
RUMEENIA betoon ja betoontooted (ICS: 91.100.30;
29.240.20)
vastavus Euroopa standarditele
60 päeva
G/TBT/N/CHN/119 29. juuli 2005
HIINA ukselukud M1 ja N1 kategooria sõidukitele
(ICS: 43)
ohutus 60 päeva
14
G/TBT/N/NOR/6 29. juuli 2005
NORRA tervisele ohtlikud kemikaalid
(Decabromodiphenyl ether)
inimeste tervise kaitse ja
keskkonnakaitse
UUED STANDARDID JA KAVANDID ARVAMUSKÜSITLUSEKS
EVS Teataja avaldab andmed uutest vastuvõetud Eesti standarditest ja avalikuks arvamusküsitluseks esitatud standardite kavanditest rahvusvahelise standardite klassi-fikaatori (ICS) järgi. Samas jaotises on toodud andmed nii eesti keeles avaldatud, kui ka jõustumisteatega Eesti standarditeks inglis-keelsetena vastuvõetud rahvusvahelistest ja Euroopa standarditest. Eesmärgiga tagada standardite vastuvõtmine, peab standardite vastuvõtmisele eelnema standardite kavandite avalik arvamusküsitlus, mis tähendab, et asjast huvitatul, on ettenähtud perioodi jooksul võimalik tutvuda standardite kavanditega ning teha seejärgselt vastavasisulisi ettepanekuid.
Arvamusküsitlusele on esitatud:
1. Euroopa ja rahvusvahelised standardid, mis on kavas vastu võtta Eesti standarditeks jõustumisteatega. Inglise-keelsete kavanditega saab tutvuda EVS raamatukogus ja osta on neid võimalik EVS müügigrupist. EVS tehnilistel komiteedel on võimalik saada tasuta koopiaid oma käsitlusalaga
kokkulangevatest standarditest EVS kontaktisiku kaudu.
2. Eesti standardite kavandid, mis Eesti standardimisprogrammi järgi on jõudnud arvamusküsitluse etappi. Kavanditega saab tutvuda Eesti Standardikeskuse raamatu-kogus [email protected] ning osta EVS müügigrupist [email protected].
3. Euroopa (prEN) standardite kavandid, mis on saadetud liikmetele arvamusküsitluseks (kavandid on kättesaadavad EVS raamatu-kogus, v.a Euroopa standarditeks üle-võetavate nende konkreetsete ISO tehniliste komiteede kavandid (prEN ISO), mille töös EVS ei osale). Kavandeid saab osta müügigrupist. EVS tehnilistel komiteedel on võimalik saada koopiaid oma käsitlusalaga kokkulangevatest kavanditest EVS kontaktisiku kaudu. Teavet Eesti standardimisprogrammist saab EVS standardiosakonnast.
15
ICS PÕHIRÜHMAD
ICS Nimetus
01 Üldküsimused. Terminoloogia. Standardimine. Dokumentatsioon 03 Teenused. Ettevõtte organiseerimine, juhtimine ja kvaliteet. Haldus. Transport.
Sotsioloogia 07 Matemaatika. Loodusteadused 11 Tervisehooldus 13 Keskkonna- ja tervisekaitse. Ohutus 17 Metroloogia ja mõõtmine. Füüsikalised nähtused. 19 Katsetamine 21 Üldkasutatavad masinad ja nende osad 23 Üldkasutatavad hüdro- ja pneumosüsteemid ja nende osad 25 Tootmistehnoloogia 27 Elektri- ja soojusenergeetika 29 Elektrotehnika 31 Elektroonika 33 Sidetehnika 35 Infotehnoloogia. Kontoriseadmed 37 Visuaaltehnika 39 Täppismehaanika. Juveelitooted 43 Maanteesõidukite ehitus 45 Raudteetehnika 47 Laevaehitus ja mereehitised 49 Õhusõidukid ja kosmosetehnika 53 Tõste- ja teisaldusseadmed 55 Pakendamine ja kaupade jaotussüsteemid 59 Tekstiili- ja nahatehnoloogia 61 Rõivatööstus 65 Põllumajandus 67 Toiduainete tehnoloogia 71 Keemiline tehnoloogia 73 Mäendus ja maavarad 75 Nafta ja naftatehnoloogia 77 Metallurgia 79 Puidutehnoloogia 81 Klaasi- ja keraamikatööstus 83 Kummi- ja plastitööstus 85 Paberitehnoloogia 87 Värvide ja värvainete tööstus 91 Ehitusmaterjalid ja ehitus 93 Rajatised 95 Sõjatehnika 97 Olme. Meelelahutus. Sport 99 Muud
16
01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOONUUED STANDARDID
CEN/TR 14599:2005
This document is a compilation of technical terms listed in EN 1792 and specifically related to welding and allied processes with their definitions.
Terms and definitions for welding purposes in relation with EN 792
Hind 343,00Identne CEN/TR 14599:2005
Keel enCEN/TR 15133:2005
This Technical Report lists collective terms and codes for groups of medical devices having common features. The listing is structured so that the terms can be used for the purposes required in regulatory reporting and for communication relevant to the application of the medical device regulation.
Nomenclature - Collective terms and codes for groups of medical devices
Hind 123,00Identne CEN/TR 15133:2005
Keel enEVS-EN 4408-001:2005
This standard specifies the general rules for the representation of parts made of composite materials, in technical drawings. It applies to aerospace structures using composites materials, and their applications when this standard is specified.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
Hind 95,00Identne EN 4408-001:2005
Keel enEVS-EN 4408-002:2005
This standard specifies the rules for the representation of laminated parts as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts
Hind 123,00Identne EN 4408-002:2005
Keel enEVS-EN 4408-003:2005
This standard specifies the rules for the representation of parts including core materials as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials
Hind 123,00Identne EN 4408-003:2005
Keel en
EVS-EN 4408-004:2005
This standard specifies the rules for the representation of items in composite materials obtained by winding as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding
Hind 95,00Identne EN 4408-004:2005
Keel enEVS-EN 4408-005:2005
This standard specifies the representation of seams of composite materials as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams
Hind 123,00Identne EN 4408-005:2005
Keel enEVS-EN 4408-006:2005
This standard specifies the rules for the representation of preforms of composite materials as well as the information to be indicated in the technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms
Hind 104,00Identne EN 4408-006:2005
Keel enEVS-EN 14190:2005
This European Standard specifies the characteristics and performance of products which have been produced from gypsum plasterboards manufactured according to EN 520 by reprocessing.
Lisatöötlusel saadavad kipsplaadist tooted. Määratlused, nõuded ja katsemeetodid
Hind 171,00Identne EN 14190:2005
Keel enEVS-EN ISO 19952:2005
This International Standard defines terms used in the footwear industry, in English, French, Spanish and Italian. The terms and their definitions are listed alphabetically in English.
Footwear - Vocabulary
Hind 286,00Identne EN ISO 19952:2005ja identne ISO 19952:2005
Keel enEVS-IEC 60050-811:2005
International Electrotechnical Vocabulary - Chapter 811: Electric traction
Hind 402,00ja identne IEC 60050(811):1991
Keel en
17
EVS-ISO 1101:2005
This International Standard contains basic information and gives requirements for the geometrical tolerancing of workpieces. It represents the initial basis and defines the fundamentals for geometrical tolerancing.
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Hind 246,00ja identne ISO 1101:2004
Keel enEVS-ISO 11799:2005
Standard määratleb parameetrid üldotstarbelistele hoidlatele, mida kasutatakse arhiivi- ja raamatukogumaterjalide pikaajaliseks hoiuks. See käsitleb hoone asukohta ja konstruktsiooni ning kasutatavat seadmestikku ja varustust. Standard on rakendatav kõikidele arhiivi- ja raamatukogumaterjalidele, mida hoitakse üldotstarbelistes hoidlates, kus võidakse hoida koos erinevaid meediumeid. See ei välista üksikute hoidlate sees eraldi alade või osade rajamist, kus saab keskkonda kontrollida, et luua spetsiifiliste arhiivimaterjalide nõuetele vastavad tingimused.
Informatsioon ja dokumentatsioon Dokumentide hoiunõuded raamatukogu- ja arhiivimaterjalidele
Hind 151,00ja identne ISO 11799:2003
Keel enEVS-ISO 14416:2005
Standard on rakendatav nende raamatute, perioodikaväljaannete ja arhiividokumentide köitmisel, mille vastupidavusele ja kestvusele esitatakse erilisi nõudeid. Standard on rakendatav järgmiste põhitoimingute teostamisel: – kirjastatud, mittekirjastatud säilikute ja teiste samalaadset kaitset vajavate dokumentide esmane kõvakaaneline köitmine; – kõvakaaneliste monograafiate, seeriaväljaannete ja mis tahes teiste dokumentide ümberköitmine. Standard ei ole ette nähtud nende köidete köitmiseks, millel on tellija hinnangul kõrge kunsti- või ajalooline väärtus või ükskõik milliste köidete köitmiseks, mida, tulenevalt nende füüsilisest seisundist, ei saa või ei ole võimalik köita vastavalt käesolevale standardile. Eritöötluste korraldus tuleks eraldi ette näha.
Informatsioon ja dokumentatsioon. Raamatute, perioodika- ja jadaväljaannete ning teiste paberdokumentide köitmisele esitatavad nõuded arhiivides ja raamatukogudes. Meetodid ja materjalid
Hind 221,00ja identne ISO 14416:2003
Keel et
03 TEENUSED. ETTEVÕTTE ORGANISEERIMINE, JUHTIMINE JA KVALITEET. HALDUS. TRANSPORT. SOTSIOLOOGIAUUED STANDARDID
CWA 14729-1:2005
The present document provides different models described in UML (Unified Modeling Language) as a basis for the definition of a DTD or an XML schema of the Intrastat declaration, called INSTAT/XML and its optional response, called INSRES/XML.
The Intrastat System - Part 1: The Implementation Model
Hind 199,00Identne CWA 14729-1:2005
Keel enCWA 14729-2:2005
The purpose of this document is to provide the Message Implementation Guideline (MIG) of INSTAT/XML, the Intrastat declaration in XML.
The Intrastat System - Part 2: Message Implementation Guideline of INSTAT/XML
Hind 268,00Identne CWA 14729-2:2005
Keel enCWA 14729-3:2005
The purpose of this document is to provide the Message Implementation Guideline (MIG) of INSRES/XML, the response to the Intrastat declaration in XML.
The Intrastat System - Part 3: Message Implementation Guideline of INSRES/XML
Hind 199,00Identne CWA 14729-3:2005
Keel enEVS-EN 14873-1:2005
This European Standard specifies minimum requirements for the provision of storage facilities and related services, for furniture and personal effects belonging to private individuals and is applicable to all forms of such storage whatever the means of containment employed.
Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 1: Specification for the storage facility and related storage provision
Hind 84,00Identne EN 14873-1:2005
Keel enEVS-EN 14873-2:2005
This European Standard specifies service activities designed to ensure a customer oriented service for the storage of furniture and personal effects for private individuals.
Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 2: Provision of the service
Hind 104,00Identne EN 14873-2:2005
Keel en
18
07 MATEMAATIKA. LOODUSTEADUSEDUUED STANDARDID
EVS-EN 14486:2005
This European Standard describes a method for the detection of those serotypes of enterovirus that replicate and form plaques in BGM cells under agar. These will largely be poliovirus and Coxsackievirus B serotypes. Most serotypes of echovirus, Coxsackievirus A and animal enteroviruses are unlikely to produce plaques under these conditions.
Water quality - Detection of human enteroviruses by monolayer plaque assay
Hind 113,00Identne EN 14486:2005
Keel en
11 TERVISEHOOLDUSUUED STANDARDID
CEN/TR 15133:2005
This Technical Report lists collective terms and codes for groups of medical devices having common features. The listing is structured so that the terms can be used for the purposes required in regulatory reporting and for communication relevant to the application of the medical device regulation.
Nomenclature - Collective terms and codes for groups of medical devices
Hind 123,00Identne CEN/TR 15133:2005
Keel enEVS-EN 1282-2:2005
This European Standard specifies requirements for paediatric tracheostomy tubes made of plastics materials and/or rubber having inside diameters from 2,0 mm to 6,0 mm. Requirements for paediatric tracheostomy tube connectors and adaptors are also given.
Trahheostoomikanüülid. Osa 2: Pediaatrilised kanüülid
Hind 141,00Identne EN 1282-2:2005ja identne ISO 5366-3:2001
Keel enAsendab EVS-EN 1282-2:1999EVS-EN 1820:2005
This document specifies requirements for antistatic and non-antistatic reservoir bags for use with anaesthetic apparatus or lung-ventilator breathing systems. It includes requirements for the design of the neck, size designation, distension and, where relevant, for electrical resistance. This document is not applicable to special-purpose bags, for example bellows and self-expanding bags. Bags for use with anaesthetic gas scavenging systems are not considered to be anaesthetic reservoir bags and are thus outside the scope of this document.
Anesteetikumikotid
Hind 141,00Identne EN 1820:2005ja identne ISO 5362:2000
Keel enAsendab EVS-EN 1820:1999
EVS-EN 62274:2005
Applies to the design and manufacture and some installation aspects of a record and verify system (RVS) for use in radiotherapy in human medical practice that a) provides, defines, or displays treatment machine set up data; imports data either through input by the operator or directly from other devices, b) may control the ability of that equipment to operate; c) records data of all treatment sessions; and d) is intended to be: 1) for normal use, under the authority of appropriately licensed or qualified persons, by operators having the required skills and training; 2) maintained in accordance with the recommendations given in the instructions for use; and 3) used within the environmental and electrical supply conditions specified in the technical description.
Medical electrical equipment – Safety of radiotherapy record and verify systems
Hind 151,00Identne EN 62274:2005ja identne IEC 62274:2005
Keel enEVS-EN ISO 14408:2005
This International Standard specifies marking, labelling and information to be supplied by the manufacturer for cuffed and uncuffed tracheal tubes and related materials designed to resist ignition by a laser.
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
Hind 104,00Identne EN ISO 14408:2005ja identne ISO 14408:2005
Keel enEVS-ISO 7193:2005
The limits of overall dimensions of wheelchairs primarily intended for indoor use are laid down with the purpose of a good manoeuvrability and accessibility of motor vehicles, lifts, kitchen equipment etc. It applies to manual as well as electric wheelchairs in their operational condition, and covers wheelchairs usable by 85 per cent of disabled people.
Wheelchairs - Maximum overall dimensions
Hind 62,00ja identne ISO 7193:1985
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 1282-2:1999
Standardi käesolev osa esitab nõuded plastist ja/või kummist valmistatud laste trahheostoomikanüülidele, mille sisemine diameeter on 2,0 - 6,0 millimeetrit. Samuti on esitatud nõuded laste trahheostoomikanüülide liitmikele ja adapteritele. Eriotstarbeliste trahheostoomikanüülid on käesoleva standardi reguleerimisalast välja jäetud.
Trahheostoomikanüülid. Osa 2: Pediaatrilised kanüülid
Identne EN 1282-2:1997
Keel en
19
EVS-EN 1820:1999
Standard esitab nõuded anesteesiaaparaatidega või kopsuventilaatoritega koos kasutatavatele kottidele. Siin on nõuded kaelakonstruktsioonile, suuruse tähistamisele, paisuvusele ning seal, kus see on oluline, elektritakistusele. Eriotstarbelised kotid, nagu näiteks lõõts ja isepaisuvad kotid, on käesoleva standardi reguleerimisalast välja jäetud.
AnesteetikumikotidIdentne EN 1820:1997
Keel enAsendatud EVS-EN 1820:2005
KAVANDITE ARVAMUSKÜSITLUS
EN 1060-3:1999/prA1
Standardi käesolev osa esitab funktsioneerimise, jõudluse ja ohutusnõuded vererõhu mõõtmiseks ettenähtud elektromehaanilistele süsteemidele, mida kasutatakse mitteinvasiivseks arteriaalse vererõhu mõõtmiseks õlavarrel, randmel ja reiel täispuhutava manseti abil. Standard esitab ka nõuded nende lisaseadmetele ning annab testimismeetodid.
Mitteinvasiivsed sfügmomanomeetrid. Osa 3: Lisanõuded vererõhu mõõtmiseks ettenähtud elektromehaanilistele süsteemidele
Identne EN 1060-3:1997/prA1:2005
Keel en
Tähtaeg 17.09.2005
EN 60336
Applies to focal spots in medical diagnostic X-ray tube assemblies or medical use, operating at X-ray tube voltages up to and including 200 kV. Describes the test methods for evaluating focal spot characteristics and the means for indicating compliance.
Medical electrical equipment – X-ray tube assemblies for medical diagnosis – Characteristics of focal spots
Identne EN 60336:2005ja identne IEC 60336:2005
Keel en
Tähtaeg 9.09.2005
prEN 14675
This European Standard specifies a test method and the minimum requirements for virucidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with hard water or – in the case of ready-to-use-products – with water.
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary field - Test method and requirements
Identne prEN 14675:2005
Keel en
Tähtaeg 16.09.2005
prEN 14683
This European Standard specifies construction and performance requirements, and test methods for surgical masks intended to limit the transmission of infective agents from staff to patients and (in certain situations vice-versa) during surgical procedures in operating theatres and other medical settings with similar requirements.
Surgical masks - Requirements and test methods
Identne prEN 14683:2005
Keel en
Tähtaeg 11.09.2005
prEN ISO 8185 rev
Käesolev standard esitab nõuded niisutite, k.a. need, mis sobivad ühendamiseks hingamissüsteemidega, ohutusele ja ekspluatatsioonile. Standard sisaldab ka nõudeid väljutustorudele, k.a. soojendatud väljutustorud (soojendatatud armeeritud väljutustorud), ning seadmetele, mis on ette nähtud nende soojendatud väljutustorude kontrollimiseks, s.o. soojendatud hingamistorude kontrollimise seadmetele.
Meditsiiniliseks kasutamiseks ettenähtud niisutid. Niisutamissüsteemidele esitatavad üldnõuded
Identne prEN ISO 8185:2005ja identne ISO/DIS 8185:2005
Keel enAsendab EVS-EN ISO 8185:1999
Tähtaeg 19.09.2005
prEN ISO 9680 rev
Käesolev standard kehtib mistahes konstruktsiooniga stomatoloogiliste töövalgustite kohta, mida kasutatakse suuõõne valgustamiseks. Standard esitab nõuded ja testimismeetodid. Standard sisaldab ka tehnilisi andmeid seoses tootja poolt antavate juhiste, märgistuse ja pakendamisega.
Stomatoloogias kasutatav töövalgustus
Identne prEN ISO 9680:2005ja identne ISO/DIS 9680:2005
Keel enAsendab EVS-EN ISO 9680:1999
Tähtaeg 19.09.2005
13 KESKKONNA- JA TERVISEKAITSE. OHUTUSUUED STANDARDID
CEN/TR 12566-2:2005
This document specifies the recommended requirements for soil infiltration systems ranging in size from a single house to 50 PT receiving domestic wastewater from septic tanks manufactured according to the requirements given in EN 12566-1 and prEN 12566-4.
Small wastewater treatment systems for up to 50 PT - Part 2: Soil infiltration systems
Hind 221,00Identne CEN/TR 12566-2:2005
Keel en
20
CEN/TR 15119:2005
This Technical Report specifies two laboratory methods for obtaining water samples: one from preservative treated wood exposed out of ground contact (wood held in the storage yard after treatment and Use Class 3) and the other from treated wood which has been in continuous contact with ground or water (Use Class 4 or 5), at increasing time intervals after exposure.
Durability of wood and wood-based products - Estimation of emissions from preservative treated wood to the environment - Wood held in the torage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground), and wooden ommodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method
Hind 132,00Identne CEN/TR 15119:2005
Keel enEVS 812-5:2005
Standard sätestab ehituslikud tuleohutusnõuded põlevvedelike käitlemisega tegelevatele tanklatele ja terminalidele (VI kasutusviis), ning vastava tegevusega muude hoonete ja rajatiste piisavalt ohutuks projekteerimiseks ja ehitamiseks.
Ehitiste tuleohutus. Osa 5: Kütuseterminalide ja tanklate tuleohutus
Hind 162,00ja identne EVS 812-5
Keel etEVS-EN 54-13:2005
This document specifies the requirements for compatibility and connectability assessment of system components that either comply with the requirements of EN 54 or with a manufacturer’s specification where there is no EN 54 standard. This document only includes system requirements when these are necessary for compatibility assessment.
Fire detection and fire alarm systems - Part 13: Compatibility assessment of system components
Hind 151,00Identne EN 54-13:2005
Keel enEVS-EN 81-73:2005
This European Standard specifies the special provisions and safety rules to ensure the behaviour of lifts in the event of fire in a building, on the basis of a signal(s) from the fire alarm detection system to the lift(s) control system.
Liftide valmistamise ja paigaldamise ohutuseeskirjad. Reisijate ja kaupade veoks mõeldud liftide eriotstarbelised rakendused. Osa 73: Liftide käitumine tulekahju korral
Hind 123,00Identne EN 81-73:2005
Keel en
EVS-EN 1005-4:2005
This European Standard presents guidance when designing machinery or its component parts in assessing and affecting health risks due only to machine-related postures and movements, i.e. during assembly, installation, operation, adjustment, maintenance, cleaning, repair, transport, and dismantlement.
Masinate ohutus. Inimeste füüsiline töö. Osa 4: Tööasendite ja liigutuste hindamine
Hind 132,00Identne EN 1005-4:2005
Keel enEVS-EN 1996-1-2:2005
This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
Hind 286,00Identne EN 1996-1-2: 2005
Keel enEVS-EN 12101-6:2005
This document specifies pressure differential systems designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings.
Suitsu ja kuumuse kontrollsüsteemid. Osa 6: Rõhuvahesüsteemide spetsifikatsioon. Komplektid
Hind 286,00Identne EN 12101-6:2005
Keel enEVS-EN 12477:2001/A1:2005
This standard specifies requirements and test methods for protective gloves for use in manual metal welding, cutting and allied processes. Protective gloves for welders protect the hands and the wrists during the process of welding and related tasks
Keevitajate kaitsekindad
Hind 73,00Identne EN 12477:2001/A1:2005
Keel enEVS-EN 14662-1:2005
This part of EN 14662 gives general guidance for the sampling and analysis of benzene in air by pumped sampling, thermal desorption and capillary gas chromatography.
Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
Hind 190,00Identne EN 14662-1:2005
Keel en
21
EVS-EN 14662-2:2005
This part of EN 14662 is in accordance with the generic methodology for the determination of benzene in ambient air [1] for the purpose of comparison of measurement results with limit values with a one-year reference period.
Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
Hind 180,00Identne EN 14662-2:2005
Keel enEVS-EN 14662-3:2005
This part of EN 14662 is in accordance with the generic methodology selected as the basis of the European Union Reference Method for the determination of benzene in ambient air [1] for the purpose of comparison of measurement results with limit values with a one-year reference period.
Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
Hind 208,00Identne EN 14662-3:2005
Keel enEVS-EN 14662-4:2005
This part of EN 14662 is in accordance with the generic methodology selected as the basis of the European Union for the determination of benzene in ambient air [1] for the purpose of comparison of measurement results with limit values with a one-year reference period.
Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
Hind 180,00Identne EN 14662-4:2005
Keel enEVS-EN 14662-5:2005
This part of EN 14662 is in accordance with the generic methodology selected as the basis of the European Union for the determination of benzene in ambient air [1] for the purpose of comparison of measurement results with limit values with a one-year reference period.
Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
Hind 180,00Identne EN 14662-5:2005
Keel enEVS-EN 50131-5-3:2005
This European Standard applies to intrusion alarm equipment using radio frequency (RF) links and�located on protected premises. It does not cover long range radio transmissions
Alarm systems - Intrusion systems Part 5-3: Requirements for interconnections equipment using radio frequency techniques
Hind 162,00Identne EN 50131-5-3:2005
Keel en
EVS-EN 60335-2-61:2003/A1:2005
Deals with the safety of electric thermal-storage room heaters intended to heat the room in which they are located, their rated voltage being not more than 250 V for single phase and 480 V for other appliances.
Majapidamismasinad ja nende sarnased elektriseadmed. Ohutus. Osa 2-61: Erinõuded termilistele laoruumi küttekehadele
Hind 73,00Identne EN 60335-2-61:2003/A1:2005ja identne IEC 60335-2-61:2002/A1:2005
Keel enEVS-EN 60335-2-25:2003/A1:2005
Deals with the safety of microwave ovens for household use. The rated voltage is less than 250 V. It also deals with combination microwave ovens. For commercial microvave ovens, see IEC 60335-2-90
Majapidamismasinad ja nende sarnased elektriseadmed. Ohutus. Osa 2-25: Erinõuded mikrolaineahjudele
Hind 73,00Identne EN 60335-2-25:2002/A1:2005ja identne IEC 60335-2-25:2002/A1:2005
Keel enEVS-EN 60695-6-1:2005
Gives guidance on: a) optical measurement of smoke obscuration; b) general aspects of optical smoke test methods; c) consideration of test methods; d) expression of smoke test data; e) relevance of optical smoke data to hazard assessment.
Fire hazard testing Part 6-1: Smoke obscuration – General guidance
Hind 190,00Identne EN 60695-6-1:2005ja identne IEC 60695-6-1:2005
Keel enAsendab EVS-EN 60695-6-1:2003EVS-EN ISO 16588:2004/A1:2005
This International Standard specifies a method for the determination of the water-soluble organic complexing agents listed in Table 1 in the concentration range from 0,5 ug/l to 200 ug/l, if a sample volume between 50 ml and 100 ml is used.
Water quality - Determination of six complexing agents - Gaschromatographic method
Hind 84,00Identne EN ISO 16588:2003/A1:2005ja identne ISO 16588:2002/Amd 1:2004
Keel enEVS-ISO 5658-2:2005
This part of ISO 5658 specifies a method of test for measuring the lateral spread of flame along the surface of a specimen of a product orientated in the vertical position. It provides data suitable for comparing the performance of essentially flat materials, composites or assemblies, which are used primarily as the exposed surfaces of walls.
Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building products in vertical configuration
Hind 171,00ja identne ISO 5658-2:1996
Keel en
22
EVS-ISO 9239-2:2005
This part of ISO 9239 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover). This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results. This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
Hind 171,00ja identne ISO 9239-2:2002
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS 812-2:2002
Käesolev standard sätestab tuleohutusnõuded ehitiste ventilatsiooni- ja siutsueemaldussüsteemide projekteerimisele, ehitamisele ja ekspluatatsioonile.
Ehitiste tuleohutus. Osa 2: Ventilatsioonisüsteemid ja suitsueemaldus
ja identne EVS 812-2:2002
Keel etAsendatud EVS 812-2:2005EVS-EN 12122:2001
This European Standard is applicable to ammonia solution used for treatment of water intended for human consumption. It describes the characteristics of ammonia solution and specifies the requirements and the corresponding test methods for ammonia solution. It gives information on its use in water treatment.
Chemicals used for treatment of water intended for human consumption - Ammonium solution
Identne EN 12122:1998
Keel enAsendatud EVS-EN 12122:2005EVS-EN 60695-6-1:2003
This document gives guidance on: a) the optical measurement of smoke obscuration, b) the general aspects of optical smoke test methods, c) the consideration of test methods, d) the expression of smoke test data, and e) the relevance of optical smoke data to hazard assessment.
Fire hazard testing - Part 6-1: Smoke opacity - General guidance
Identne EN 60695-6-1:2001ja identne IEC 60695-6-1:2001
Keel enAsendatud EVS-EN 60695-6-1:2005
KAVANDITE ARVAMUSKÜSITLUS
EN 12259-2:1999/prA2
Standard sätestab nõuded automaatsetes sprinklersüsteemides kasutatavate märgalarmklappide ja aeglustusklambrite konstruktsioonidele ja talitusele. Standard ei käsitle märgalarmklappide ja aeglustusklambrite lisaseadmeid.
Paiksed tulekustutussüsteemid. Sprinkler- ja veepihustussüsteemide komponendid. Osa 2: Märgalarmklapid
Identne EN 12259-2:1999/prA2:2005
Keel en
Tähtaeg 12.09.2005
EN 12259-3:2000/prA1
Standard sätestab nõuded automaatsetes sprinklersüsteemides kasutatavate kuivalarmklappide, kiirendajate ja õhueemaldajate konstruktsioonidele ja talitlusele vastavuses standardi kavandi prEN 12845 Automatic sprinkler systems: Design and Installation lisadele A ja B.
Paiksed tulekustutussüsteemid. Sprinkler- ja veepihustussüsteemide komponendid. Osa 3: Kuivalarmklapid
Identne EN 12259-3:2000/prA2:2005
Keel en
Tähtaeg 12.09.2005
EN ISO 11064-6
This part of ISO 11064 gives environmental requirements as well as recommendations for the ergonomic design, upgrading or refurbishment of control rooms and other functional areas within the control suite.
Ergonomic design of control centres - Part 6: Environmental requirements for control centres
Identne EN ISO 11064-6:2005ja identne ISO 11064-6:2005
Keel en
Tähtaeg 27.09.2005
prEN 1568-3 rev
This document specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids
Identne prEN 1568-3:2005
Keel enAsendab EVS-EN 1568-3:2001
Tähtaeg 16.09.2005
prEN 1568-4 rev
This document specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-miscible liquids.
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
Identne prEN 1568-4:2005
Keel enAsendab EVS-EN 1568-4:2001
Tähtaeg 16.09.2005
23
prEN 15259
This European Standard specifies:a) minimum requirements for the measurement strategy, measurement planning and reporting of emission measurements of air pollutants and reference quantities to be carried out in exhaust ducts at plants;b) minimum requirements for the design and construction of a plant with respect to performing emission measurements. This specifically applies to the arrangement, number and construction of the measurement ports and measurement sites.
Air quality - Measurement of stationary source emissions - Measurement strategy, measurement planning, reporting and design of measurement sites
Identne prEN 15259:2005
Keel en
Tähtaeg 16.09.2005
prEN 15267-3
This European Standard lays down the performance specifications and test procedures for automated measuring systems which measure gases and particulates in, and flow of, the waste gas of stationary sources.
Air quality - Certification of automated measuring systems - Part 3: Performance specifications and test procedures for automated measuring systems for monitoring emissions from stationary sources
Identne prEN 15267:2005
Keel en
Tähtaeg 20.09.2005
prEN 15276-1
This document specifies requirements and describes test methods for condensed aerosol extinguishing components and covers solely condensed aerosols.
Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components
Identne prEN 15276-1:2005
Keel en
Tähtaeg 16.09.2005
prEN 15276-2
This document specifies requirements and describes the methods for the design, installation, testing, maintenance and safety of condensed aerosol extinguishing systems and the characteristics of the extinguishant media and types of fire for which it is a suitable extinguishing medium.
Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance
Identne prEN 15276-2:2005
Keel en
Tähtaeg 16.09.2005
prEN 50264-1
Part 1 of EN 50264 specifies the general requirements applicable to the cables given in all other parts of EN 50264. It includes the detailed requirements for the insulating and sheathing materials and other components called up in the separate Parts.
Railway applications - Railway rolling stock power and control cables having special fire performance Part 1: General requirements
Identne prEN 50264-1:2005
Keel enAsendab EVS-EN 50264-1:2003
Tähtaeg 10.09.2005
prEN 50264-2-2
Part 2-2 of EN 50264 specifies requirements for, and constructions and dimensions of, multicore cables of the following types and voltage ratings: • 300/500 V screened or unscreened (1 mm2, 1,5 mm2 and 2,5 mm2, number of cores from 2 to 40); • 0,6/1 kV screened or unscreened, (1 mm2 to 50 mm2, 2, 3 and 4 core).
Railway applications - Railway rolling stock power and control cables having special fire performance Part 2-2: Cables with crosslinked lastomeric insulation - Multicore cables
Identne prEN 50264-2-2:2005
Keel enAsendab EVS-EN 50264-3:2003
Tähtaeg 23.09.2005
prEN 50264-3-1
Part 3-1 of EN 50264 specifies requirements for, and constructions and dimensions of, single core cables of the following types and voltage ratings:• 0,6/1 kV unscreened, unsheathed (1 mm2 to 400 mm2);• 1,8/3 kV unscreened, unsheathed (1,5 mm2 to 400 mm2); • 1,8/3 kV unscreened, sheathed (1,5 mm2 to 400 mm2); • 3,6/6 kV unscreened, sheathed (2,5 mm2 to 400 mm2).
Railway applications - Railway rolling stock power and control cables having special fire performance Part 3-1: Cables with crosslinked elastomeric insulation with reduced dimensions - Single core cables
Identne EN 50264-3-1:2005
Keel en
Tähtaeg 23.09.2005
prEN 50264-3-2
Part of EN 50264-3-2 specifies requirements for, and constructions and dimensions of, multicore cables of the following types and voltage ratings: • 300/500 V screened or unscreened (1 mm2, 1,5 mm2 and 2,5 mm2, number of cores from 2 to 40) • 0,6/1 kV screened or unscreened, (1 mm2 to 50 mm2, 2, 3 and 4 core)
Railway applications - Railway rolling stock power and control cables having special fire performance Part 3-2: Cables with crosslinked elastomeric insulation with reduced dimensions - Multicore cables.
Identne prEN 50264-3-2:2005
Keel en
Tähtaeg 23.09.2005
prEN 61582
Specifies the classification, general design requirements, performance characteristics and test procedures for in vivo counting systems for detecting trace amounts of radionuclides in the bodies of persons working in nuclear power plants, laboratories and facilities handling radionuclides, and inhabitants living on territory which may be contaminated. The purpose is to determine the dose equivalent to organs and the effective dose of internal radiation for the whole body.
Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
Identne prEN 61582:2005ja identne IEC 61582:2004
Keel en
Tähtaeg 23.09.2005
24
prEN ISO 9241-400
This part of ISO 9241 gives guidelines for physical input devices for interactive systems. It provides guidance based on ergonomic factors for the following input devices: keyboards, mice, pucks, joysticks, trackballs, trackpads, tablets and overlays, touch sensitive screens, styli, and light pens, voice controlled devices, gesture controlled devices (see. 6.1.1).
Ergonomics of human--system interaction - Physical input devices - Part 400: Guiding principles, introduction and general design requirements
Identne prEN ISO 9241-400:2005ja identne ISO/DIS 9241-400:2005
Keel en
Tähtaeg 12.09.2005
prEN ISO 20685
This International Standard specifies methodologies and addresses protocols for the use of 3-D surfacescanning systems in the acquisition of human body shape data based on measurements taken according to ISO 7250 and suitable for internationally compatible databases.
3-D scanning methodologies for internationally compatible anthropometric databases
Identne prEN ISO 20685:2005ja identne ISO/FDIS 20685:2005
Keel en
Tähtaeg 12.09.2005
prEN ISO 5667-1 rev
Standard selgitab nende proovivõtmisprogrammide koostamisel rakendatavaid põhimõtteid, mille eesmärgiks on vee kvaliteedi kontrollimine, kvaliteedile hinnangu andmine ning vee saasteallikate kvalitatiivne määramine, kaasa arvatud põhjasetted ja muda. Täpsemad juhised konkreetsete proovivõtmise situatsioonide kohta on toodud järgnevates Euroopa standardites.
Vee kvaliteet. Proovi võtmine. Osa 1: Proovivõtmise programmide koostamisjuhised
Identne prEN ISO 5667-1:2005ja identne ISO/DIS 5667-1:2005
Keel enAsendab EVS-EN 25667-1:2005
Tähtaeg 12.09.2005
17 METROLOOGIA JA MÕÕTMINE. FÜÜSIKALISED NÄHTUSEDUUED STANDARDID
EVS-EN 10318:2005
This European Standard specifies a glow discharge optical emission spectrometric method for the determination of the thickness and chemical composition of metallic surface coatings consisting of zinc and aluminium based alloys. The alloying elements considered are aluminium, nickel, silicon and lead.
Determination of thickness and chemical composition of zincand aluminium-based metallic coatings - Routine method
Hind 151,00Identne EN 10318:2005
Keel en
EVS-EN 60118-13:2005
Covers all relevant EMC phenomena for hearing aids. EMC phenomena, such as RF emission and electrostatic discharge, are not currently known to be a significant problem in connection with hearing aids and are therefore not dealt with.
Kuuldeaparaadid. Osa 13: Elektromagnetiline ühilduvus (EMC)
Hind 162,00Identne EN 60118-13:2005ja identne IEC 60118-13:2004
Keel enAsendab EVS-EN 60118-13:2002EVS-IEC 60263:2005
Specifies standard proportions for the scales for plotting frequency characteristics and polar diagrams. Does not apply to audiograms.
Scales and sizes for plotting frequency characteristics and polar diagrams
Hind 151,00ja identne IEC 60263:1982
Keel enEVS-ISO 1101:2005
This International Standard contains basic information and gives requirements for the geometrical tolerancing of workpieces. It represents the initial basis and defines the fundamentals for geometrical tolerancing.
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Hind 246,00ja identne ISO 1101:2004
Keel enEVS-ISO 8528-10:2005
This part of ISO 8528 defines measurement methods for the determination of airborne noise emitted by reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise emissions, e.g. exhaust and cooling system noise, together with all other sources of engine noise, are evaluated on a similar basis to yield comparable results. However, when the exhaust and cooling systems are ducted to a remote site their noise contribution is not to be included in this part of ISO 8528.
Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method
Hind 141,00ja identne ISO 8528-10:1998
Keel enEVS-ISO 11094:2005
Käesolev rahvusvaheline standard kirjeldab üksikasjalikult A-korrigeeritud helirõhu tasemete mõõtmise meetodeid mikrofonide kindlaksmääratud asukohde juures nii masina statsionaarses kui ka liikuvas olekus. Nende väärtuste põhjal arvutatakse välja masina A-korrigeeritud helivõimsuse tase
Akustika. Katsetuseeskiri mootorajamiga muruniidukite, murutraktorite, muru- ja aiatraktorite, professionaalsete niidukite ning niiduklisaseadmetega muru-ja aiatraktorite poolt tekitatud õhumüra mõõtmiseks
Hind 123,00ja identne ISO 11094:1991
Keel et25
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 60118-13:2002
This International standard covers all relevant EMC-phenomena for hearing aids. It specifies measurement methods and acceptance levels for hearing aid immunity to high frequency electromagnetic fields originating from digital telephone systems as specified in IEC 61000-4-3. Measurement methods for hearing aids with non-acoustic outputs and for hearing aids connected to other equipment by cables are not given in this standard.
Kuuldeaparaadid. Osa 13: Elektromagnetiline ühilduvus (EMC)
Identne EN 60118-13:1997ja identne IEC 60118-13:1997
Keel enAsendatud EVS-EN 60118-13:2002
19 KATSETAMINEUUED STANDARDID
EVS-EN 60068-2-47:2005
Provides methods for mounting products, whether packaged or unpackaged, as well as mounting requirements for equipment and other articles, for the series of dynamic tests in IEC 60068-2, that is impact (Test E), vibration (Test F) and acceleration, steady-state (Test G).
Environmental testing - Part 2-47: Test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
Hind 199,00Identne EN 60068-2-47:2005ja identne IEC 60068-2-47:2005
Keel enAsendab EVS-EN 60068-2-47:2002
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 60068-2-47:2002
Specifies standard methods of mounting of components, and related mounting requirements, for dynamic tests such as shock, bump, vibration and steady-state acceleration.
Environmental testing - Part 2-47: Test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
Identne EN 60068-2-47:1999ja identne IEC 60068-2-47:1999
Keel enAsendatud EVS-EN 60068-2-47:2002
KAVANDITE ARVAMUSKÜSITLUS
EN 60068-2-80
Intended for general application for testing specimens when simulation is required of vibration excitation of a complex and mixed nature. The purpose of the test is to demonstrate the adequacy of the specimen to resist the specified mixed mode excitation without unacceptable degradation of its functional and/or structural performance.
Environmental testing Part 2-80: Tests – Test Fi: Vibration – Mixed mode
Identne EN 60068-2-80:2005ja identne IEC 60068-2-80:2005
Keel en
Tähtaeg 9.09.2005
EN 61010-2-040
This International Standard specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4.
Ohutusnõuded mõõtmise, kontrolli ja laborikasutuse elektriseadmestikule. Osa 2- 041: Erinõuded meditsiinimaterjalide töötlemiseks auru kasutavatele autoklaavidele ja laboriprotsessidele
Identne EN 61010-2-040:2005ja identne IEC 61010-2-040:2005
Keel enAsendab EVS-EN 61010-2-041:2001; EVS-EN 61010-2-042:2001; EVS-EN 61010-2-043:2001; EVS-EN 61010-2-045:2002
Tähtaeg 9.09.2005
23 ÜLDKASUTATAVAD HÜDRO- JA PNEUMOSÜSTEEMID JA NENDE OSADUUED STANDARDID
EVS-EN 560:2005
This European Standard lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to EN ISO 2503 and blowpipes.
Gaaskeevitusseadmed. Voolikuliitmikud keevitus-, lõikamis- ja seonduvate protsesside seadmetele
Hind 95,00Identne EN 560:2005
Keel enAsendab EVS-EN 560:1999EVS-EN 1252-2:2005
This European Standard specifies the toughness requirements of the metallic materials for use at a temperature between -20°C and -80°C ensuring suitability for use for the cryogenic vessels.
Krüogeenanumad. Materjalid. Osa 2: Vastupidavusnõuded temperatuuridel vahemikus -80°C ja -20°C
Hind 162,00Identne EN 1252-2:2001
Keel en
26
EVS-EN 1555-3:2002/A1:2005
This part of prEN 1555 specifies the characteristics of fusion fittings made from polyethylene (PE) as well as of mechanical fittings made from PE and other materials for piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this standard
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
Hind 62,00Identne EN 1555-3:2002/A1:2005
Keel enEVS-EN 10224:2003/A1:2005
This European Standard amends the wording and content of EN 10224:2002 as scheduled in the following text, to enable the combined European Standard to be used as the basis for regulatory marking.
Süsinikterasest torud ja ühendusdetailid vettsisaldavate vedelike edastamiseks, sealhulgas inimestele tarbimiseks mõeldud vesi. Tehnilised tarnetingimused
Hind 123,00Identne EN 10224:2005
Keel enEVS-EN 10312:2003/A1:2005
This document amends the wording and content of EN 10312:2002 as scheduled in the following text, to enable the combined document to be used as the basis for regulatory marking.
Keevitatud roostevabad terastorud vettsisaldavate vedelike edastamiseks, sealhulgas inimestele tarbimiseks mõeldud vesi. Tehnilised tarnetingimused
Hind 113,00Identne EN 10312:2002/A1:2005
Keel enEVS-EN 13769:2003/A1:2005
This European Standard specifies the requirements for the design, manufacture, identification and testing of a cylinder bundle. It is applicable to cylinder bundles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to cylinder bundles for acetylene
Transportable gas cylinders - Cylinder bundles - Design, manufacture, identification and testing
Hind 62,00Identne EN 13769:2003/A1:2005
Keel enEVS-EN 50216-8:2005
This standard covers the butterfly valves used on the pipelines, in which the insulating liquid of power transformers or reactors flows, in order to allow the replacement of components, without removing the whole or a large amount of the insulating liquid from the conservator and the tank.
Power transformer and reactor fittings Part 8: Butterfly valves for insulating liquid circuits
Hind 132,00Identne EN 50216-8:2005
Keel en
EVS-EN ISO 2505:2005
Käesolev standard esitab kaks meetodit silindriliste termoplasttorude pikisuunalise taastumise kindlaksmääramiseks. Standard määrab, et testimismeetodit tuleb kasutada vedelikus (meetod A) või õhus (meetod B).
Plastist torustiku- ja kanalisüsteemid. Termoplasttorud. Pikisuunalise taastumise kindlaksmääramine
Hind 95,00Identne ISO 2505:2005ja identne ISO 2505:2005
Keel enAsendab EVS-EN 743:1999
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 743:1999
Käesolev standard esitab kaks meetodit silindriliste termoplasttorude pikisuunalise taastumise kindlaksmääramiseks. Standard määrab, et testimismeetodit tuleb kasutada vedelikus (meetod A) või õhus (meetod B).
Plastist torustiku- ja kanalisüsteemid. Termoplasttorud. Pikisuunalise taastumise kindlaksmääramine
Identne EN 743:1994
Keel enAsendatud EVS-EN ISO 2505:2005
KAVANDITE ARVAMUSKÜSITLUS
EN 14427:2004/prA1
This European standard specifies minimum requirements concerning materials, design, construction, prototype testing and routine manufacturing inspections of composite cylinders with a water capacity from 0,5 litre up to and including 150 litres for liquefied petroleum gases exposed to ambient temperatures, with a test pressure of 30 bar. This standard is applicable to cylinders that comprise a liner of metallic material (welded or seamless) or nonmetallic material (or a mixture thereof), reinforced by fibres of glass, carbon or aramid (or a mixture thereof). This standard is also applicable to composite cylinders without liners.
Transportable refillable composite cylinders for LPG - Design and construction
Identne EN 14427:2004/prA1:2005
Keel en
Tähtaeg 12.09.2005
prEN ISO 8434-1 rev
Käesolev standardi ISO 8438 osa määrab kindlaks üldnõuded ja nõuded mõõtmetele, konstruktsioonile ning töötamisele 24° surveliitmike jaoks. Nimetatud surveliitmikud on ette nähtud kasutamisega koos metall- ja mittemetalltorudega, mille välisläbimõõt on 4 mm kuni 42 mm (kaasa arvatud).
Metalltorude ühendused vedelikusurve all töötamiseks ja üldiseks kasutamiseks.Osa 1: 24° survearmatuur
Identne prEN ISO 8434-1:2005ja identne ISO/DIS 8434-1:2005
Keel enAsendab EVS-EN ISO 8434-1:1999
Tähtaeg 19.09.2005
27
prEN ISO 10297 rev
Käesolev standard määrab kindlaks nõuded gaasiballoonide ventiilidele ja nende ventiilide katsetamise meetodid tüübikinnituse saamiseks. Käesolev standard on kohaldatav ventiilidele, mis on paigaldatud gaasiballoonidele, mis on vee mahutavusega kuni 150 l ja on ette nähtud kokkusurutud, veeldatud või lahustatud gaaside transportimiseks. Käesolev standard on kehtiv ainult ventiilidele, mida käsitsetakse vastava käepideme või võtme abil. Käesolev standard ei ole kehtiv hingamisaparaatide, tulekustutite, krüogeensete seadmete või vedelgaasi ventiilidele.
Transporditavad gaasiballoonid. Ballooni ventiilid. Toote kirjeldus ja tüübikatsetamine
Identne prEN ISO 10297:2005ja identne ISO/FDIS 10297:2005
Keel enAsendab EVS-EN 849:1999
Tähtaeg 19.09.2005
25 TOOTMISTEHNOLOOGIAUUED STANDARDID
CEN/TR 14599:2005
This document is a compilation of technical terms listed in EN 1792 and specifically related to welding and allied processes with their definitions.
Terms and definitions for welding purposes in relation with EN 792
Hind 343,00Identne CEN/TR 14599:2005
Keel enCEN/TR 15135:2005
This Technical Report is an information document and provides guidance for design and evaluation of various joint types and geometrical configurations concerning the accessibility or ability of the weld to be examined with non-destructive testing methods.
Welding - Design and non-destructive testing of welds
Hind 141,00Identne CEN/TR 15135:2005
Keel enEVS-EN 560:2005
This European Standard lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to EN ISO 2503 and blowpipes.
Gaaskeevitusseadmed. Voolikuliitmikud keevitus-, lõikamis- ja seonduvate protsesside seadmetele
Hind 95,00Identne EN 560:2005
Keel enAsendab EVS-EN 560:1999
EVS-EN 10318:2005
This European Standard specifies a glow discharge optical emission spectrometric method for the determination of the thickness and chemical composition of metallic surface coatings consisting of zinc and aluminium based alloys. The alloying elements considered are aluminium, nickel, silicon and lead.
Determination of thickness and chemical composition of zincand aluminium-based metallic coatings - Routine method
Hind 151,00Identne EN 10318:2005
Keel enEVS-ISO 1180:2005
This International Standard relates to shanks for pneumatic tools and corresponding chuck bushings and deals with the following types : - coal pick shanks; - chisel shanks; - rivet snap shanks, parallel; - rivet snap shanks, tapered; - breaker and spade shanks; - concrete breaker shanks; - rock drill shanks. The types relate to the machine for which they are mainly designed, but this does not prevent the use of the shanks for other applications.
Shanks for pneumatic tools and fitting dimensions of chuck bushings
Hind 123,00ja identne ISO 1180:1983
Keel enEVS-ISO 1180:2005/A1:2005
Shanks for pneumatic tools and dimensions of chuck bushings ADDENDUM 1
Hind 104,00ja identne ISO 1180-1983/Add. 1-1985
Keel en
KAVANDITE ARVAMUSKÜSITLUS
EN 60519-3
Consists of requirements common to both induction and conduction heating installations and induction melting installations, and specific requirements for induction and conduction heating installations, and specific requirements for induction melting installations.
Ohutus elekterkuumutuspaigaldistes . Osa 3: Erinõuded induktsioon- ja konduktsioonkuumutus- ning induksioonsulatuspaigaldistele
Identne EN 60519-3:2005ja identne IEC 60519-3:2005
Keel enAsendab EVS-EN 60519-3:2001
Tähtaeg 9.09.2005
prEN 15182-4
In addition to the requirements given in prEN 15182-1, this document applies to hand-held high pressure branchpipes (nozzles) PN 40 with a maximum flowrate of 200 l/min at a reference pressure of 6 bar (0,6 MPa).
Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
Identne prEN 15182-4:2005
Keel en
Tähtaeg 29.08.2005
28
prEN 15282
This European Standard establishes the requirement for the design and use of vitreous enamel coated bolted cylindrical steel tanks for the storage and treatment of municipal and industrial effluent.
Vitreous and porcelain enamels - Design of vitreous enamel coated bolted steel tanks for the storage or treatment of water or municipal or industrial effluents
Identne prEN 15282:2005
Keel en
Tähtaeg 20.09.2005
prEN ISO 8501-4
This part of ISO 8501 specifies a series of preparation grades for steel surfaces after removal/partial removal of water-soluble contaminants, rust, previous paint coatings and foreign matter by high-pressure water jetting.
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with highpressure water jetting
Identne prEN ISO 8501-4:2005ja identne ISO/FDIS 8501-4:2005
Keel en
Tähtaeg 19.09.2005
prEN ISO 22827-1
This part of ISO 22827 specifies basic requirements and test methods for acceptance testing of high-power (average power more than 100 W), lamp-pumped or laser-diode-pumped Nd:YAG laser beam welding machines for seam welding with optical fibre delivery systems.
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly
Identne prEN ISO 22827-1:2005ja identne ISO/FDIS 22827-1:2005
Keel en
Tähtaeg 19.09.2005
prEN ISO 22827-2
This part of ISO 22827 covers acceptance testing of equipment for 2D manipulation and also, to some extent, movements along the Z-axis.
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism
Identne prEN ISO 22827-2:2005ja identne ISO/FDIS 22827-2:2005
Keel en
Tähtaeg 19.09.2005
27 ELEKTRI- JA SOOJUSENERGEETIKAUUED STANDARDID
EVS-EN 60308:2005
Deals with the definition and the characteristics of control systems. It is not limited to the actual controller tasks but also includes other tasks which may be assigned to a control system, such as sequence control tasks, safety and provision for the actuating energy.
Hydraulic turbines – Testing of control systems
Hind 286,00Identne EN 60308:2005ja identne IEC 60308:2005
Keel enEVS-EN 62093:2005
Establishes requirements for the design qualification of balance-of-system (BOS) components used in terrestrial photovoltaic systems. Is suitable for operation in indoor, conditioned or unconditioned; or outdoor in general open-air climates, protected or unprotected.
Balance-of-system components for photovoltaic systems – Design qualification natural environments
Hind 208,00Identne EN 62093:2005ja identne IEC 62093:2005
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 521 rev
Käesolev standard määrab kindlaks portatiivse, gaasimahutis oleva auru rõhu väljuvate veeldatud bensiiniaurude põletamise seadme konstruktsiooni ja tööomadused lähtudes ohutusest ja ratsionaalsest energiakasutusest. Standard määratleb ka katsemeetodid ning nõuded märgistusele ja informatsioonile, mis peab sisalduma juhendis.
Vedelgaasiseadmete tehniline kirjeldus. Veeldatud bensiiniaurude rõhul töötavad portatiivsed seadmed
Identne prEN 521:2005
Keel enAsendab EVS-EN 521:1999
Tähtaeg 16.09.2005
prEN 15265
This standard specifies the assumptions, boundary conditions and validation tests for a calculation procedure for the annual energy use for space heating and cooling of a building (or of a part of it) where the calculations are done on an hourly basis.
Thermal performance of buildings - Calculation of energy use for space heating and cooling - General criteria and validation procedures
Identne prEN 15265:2005
Keel en
Tähtaeg 29.08.2005
29
prEN 15270
This European Standard relates to pellet burners having a nominal rating of not more than 70 kW, intended for fitting with appropriate boilers for hot water according to EN 303-2 and EN 303–5, and intended for high quality pellets in accordance with prCEN/TS 14961 Annex A.
Pellet burners for small heating boilers - Definitions, requirements, testing, marking
Identne prEN 15270:2005
Keel en
Tähtaeg 29.08.2005
prEN ISO 13706 rev
This International Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum and natural gas industries.
Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
Identne prEN ISO 13706:2005ja identne ISO/FDIS 13706:2005
Keel enAsendab EVS-EN ISO 13706:2001
Tähtaeg 19.09.2005
prEN ISO 16812 rev
This International Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries.
Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
Identne prEN ISO 16812:2005ja identne ISO/DIS 16812:2005
Keel enAsendab EVS-EN ISO 16812:2004
Tähtaeg 19.09.2005
29 ELEKTROTEHNIKAUUED STANDARDID
EVS-EN 50124-1:2002/A2:2005
The whole document deals with insulation coordination in railways. It applies to equipment for use in signalling, rolling stock and fixed installations up to 2000 m above sea level
Raudteealased rakendused. Isolatsiooni koordinatsioon. Osa 1: Põhinõuded. Elektri- ja elektroonikaseadmete õhk- ja ülelöögivahemikud
Hind 73,00Identne EN 50124-1:2001/A2:2005
Keel enEVS-EN 50216-8:2005
This standard covers the butterfly valves used on the pipelines, in which the insulating liquid of power transformers or reactors flows, in order to allow the replacement of components, without removing the whole or a large amount of the insulating liquid from the conservator and the tank.
Power transformer and reactor fittings Part 8: Butterfly valves for insulating liquid circuits
Hind 132,00Identne EN 50216-8:2005
Keel en
EVS-EN 50428:2005
This collateral standard applies to HBES switches with a working voltage not exceeding 250 V a.c. and a rated current up to and including 16 A. for household and similar fixed electrical installations either indoors or outdoors and to associated electronic extension units.
Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and building electronic systems (HBES)
Hind 171,00Identne EN 50428:2005
Keel enEVS-EN 60086-5:2005
This part of IEC 60086 specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse.
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
Hind 199,00Identne EN 60086-5:2005ja identne IEC 60086-5:2005
Keel enAsendab EVS-EN 60086-5:2002EVS-EN 60598-2-11:2005
This part of IEC 60598 specifies requirements for household aquarium luminaires for use with tungsten filament, tubular fluorescent or other discharge lamps on supply voltages not exceeding 1 000V.
Luminaires Part 2-11: Particular requirements – Aquarium luminaires
Hind 151,00Identne EN 60598-2-11:2005ja identne IEC 60598-2-11:2005
Keel enEVS-EN 60695-6-1:2005
Gives guidance on: a) optical measurement of smoke obscuration; b) general aspects of optical smoke test methods; c) consideration of test methods; d) expression of smoke test data; e) relevance of optical smoke data to hazard assessment.
Fire hazard testing Part 6-1: Smoke obscuration – General guidance
Hind 190,00Identne EN 60695-6-1:2005ja identne IEC 60695-6-1:2005
Keel enAsendab EVS-EN 60695-6-1:2003EVS-EN 61543:2001/A12:2005
Ensures electromagnetic compatibility (EMC) of devices providing residual current protection, for rated voltages not exceeding 440 V a.c., intended principally for protection of persons against shock hazards.
Residuaalvoolul töötavad kaitseseadmed (RCD'd) majapidamises ja selle sarnasele kasutusele. Elektromagnetiline ühilduvus
Hind 95,00Identne EN 61543:1995/A12:2005
Keel en
30
EVS-EN 62019:2002/A11:2005
This international standrad applies to auxiliary contact units associated (or intended to be associated) with circuit-breakers for overcurrent protection and with residual current operated circuit-breakters with or without integral overcurrent potection for household and similar installations having a rated voltage not exceeding 440 V a.c. and 250 V d.c. and a rated current not exceeding 10 A.
Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
Hind 95,00Identne EN 62019:1999/A11:2005
Keel enEVS-EN 62020:2001/A1:2005
This International Standard applies to residual current monitors. RCM's having internal batteries are not covered by this standard. The rated voltage shall not exceed 440 V a.c. The rated current shall not exceed 125 A for household and similar purposes. These devices are intended to monitor the residual current of the installation and to give a warning if the residual current between a live part and an exposed conductive part or earth exceeds a predetermined level.
Elektrilised abiseadmed. Residuaalvoolu monitorid majapidamises ja selle sarnasele kasutusele (RCM'd)
Hind 286,00Identne EN 62020:1998/A1:2005ja identne IEC 62020:1998/A1:2003
Keel enEVS-HD 60364-7-703:2005
he particular requirements of this part of IEC 60364 apply to: - sauna cabins erected on site, e.g. in a location or in a room; - the room where the sauna heater is, or the sauna heating appliances are installed. In this case the whole room is considered as the sauna.
Electrical installations of buildings; part 7: requirements for special installations or locations; section 703: locations containing sauna heaters
Hind 104,00Identne HD 60364-7-703:2005ja identne IEC 60364-7-703:2004
Keel enAsendab EVS-HD 384.7.703 S1:2003EVS-IEC 60050-811:2005
International Electrotechnical Vocabulary - Chapter 811: Electric traction
Hind 402,00ja identne IEC 60050(811):1991
Keel en
EVS-ISO 8528-10:2005
This part of ISO 8528 defines measurement methods for the determination of airborne noise emitted by reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise emissions, e.g. exhaust and cooling system noise, together with all other sources of engine noise, are evaluated on a similar basis to yield comparable results. However, when the exhaust and cooling systems are ducted to a remote site their noise contribution is not to be included in this part of ISO 8528.
Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method
Hind 141,00ja identne ISO 8528-10:1998
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 60086-5:2002
This International Standard specifies performance requirements for primary batteries with aqueous electrolyte to ensure their safe operation under normal use and resonably foreseeable misuse.
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
Identne EN 60086-5:2000ja identne IEC 60086-5:2000
Keel enAsendatud EVS-EN 60086-5:2002EVS-EN 60695-6-1:2003
This document gives guidance on: a) the optical measurement of smoke obscuration, b) the general aspects of optical smoke test methods, c) the consideration of test methods, d) the expression of smoke test data, and e) the relevance of optical smoke data to hazard assessment.
Fire hazard testing - Part 6-1: Smoke opacity - General guidance
Identne EN 60695-6-1:2001ja identne IEC 60695-6-1:2001
Keel enAsendatud EVS-EN 60695-6-1:2005
KAVANDITE ARVAMUSKÜSITLUS
EN 60034-3
Gives common requirements for all cylindrical rotor machines as well as specific requirements for air, for hydrogen or for liquid cooled cylindrical rotor synchronous machines. Gives also the precautions to be taken when using hydrogen cooled machines.
Rotating electrical machines Part 3: Specific requirements for cylindrical rotor synchronous machines
Identne EN 60034-3:2005ja identne IEC 60034-3:2005
Keel enAsendab EVS-EN 60034-3:2003
Tähtaeg 9.09.2005
31
EN 60836
Covers specifications and test methods for unused silicone liquid intended for use in transformers and other electrotechnical equipment. The specified characteristics of silicone transformer liquid Type 1 are described in Table 1. Other specifications will be added when required. NOTE Maintenance of used silicone liquid in electrotechnical equipment is covered in a separate publication IEC 60944.
Specifications for unused silicone insulating liquids for electrotechnical purposes
Identne EN 60836:2005ja identne IEC 60836:2005
Keel enAsendab EVS-HD 565 S1:2003
Tähtaeg 9.09.2005
EN 60947-5-1
Applies to control circuit devices and switching elements intended for control-ling, signalling, interlocking, etc., of switchgear and controlgear. It applies to control circuit devices having a rated voltage not exceeding 1 000 V a.c. (at a frequency not exceeding 1 000 Hz) or 600 V d.c.
Madalpingelised aparaadid ja juhtaparaadid. Osa 5-1: Juhtimisahela seadmed ja lülituselemendid. Elektromehaanilised juhtimisahela seadmed
Identne EN 60947-5-1:2005ja identne IEC 60947-5-1:2003
Keel enAsendab EVS-EN 60947-5-1:2004
Tähtaeg 9.09.2005
EN 61185
Specifies the dimensions that are of importance for mechanical interchangeability for ETD-cores made of ferrite, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them.
Ferrite cores (ETD-cores) intended for use in power supply applications – Dimensions
Identne EN 61185:2005ja identne IEC 61185:2005
Keel enAsendab EVS-EN 61185:2002
Tähtaeg 10.09.2005
EN 62323
Lays down the important dimensions for the mechanical interchangeability of a preferred half pot-core series of ferrites, intended to be used in inductive proximity switches.
Dimensions of half pot-cores made of ferrite for inductive proximity switches
Identne EN 62323:2005ja identne IEC 62323:2005
Keel en
Tähtaeg 10.09.2005
EN 50083-2:2002/A1
Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including equipment, systems and installations - for headend-reception, processing and distribution of television and sound signals and their associated data signals and - for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media.
Televisiooni-, heli- ja interaktiivse multimeedia signaalide kaabeljaotussüsteemid. Osa 2: Seadmete elektromagnetiline ühilduvus
Identne EN 50083-2:2001/A1:2005
Keel en
Tähtaeg 23.09.2005
prEN 50264-1
Part 1 of EN 50264 specifies the general requirements applicable to the cables given in all other parts of EN 50264. It includes the detailed requirements for the insulating and sheathing materials and other components called up in the separate Parts.
Railway applications - Railway rolling stock power and control cables having special fire performance Part 1: General requirements
Identne prEN 50264-1:2005
Keel enAsendab EVS-EN 50264-1:2003
Tähtaeg 10.09.2005
prEN 50264-2-2
Part 2-2 of EN 50264 specifies requirements for, and constructions and dimensions of, multicore cables of the following types and voltage ratings: • 300/500 V screened or unscreened (1 mm2, 1,5 mm2 and 2,5 mm2, number of cores from 2 to 40); • 0,6/1 kV screened or unscreened, (1 mm2 to 50 mm2, 2, 3 and 4 core).
Railway applications - Railway rolling stock power and control cables having special fire performance Part 2-2: Cables with crosslinked lastomeric insulation - Multicore cables
Identne prEN 50264-2-2:2005
Keel enAsendab EVS-EN 50264-3:2003
Tähtaeg 23.09.2005
prEN 50264-3-1
Part 3-1 of EN 50264 specifies requirements for, and constructions and dimensions of, single core cables of the following types and voltage ratings:• 0,6/1 kV unscreened, unsheathed (1 mm2 to 400 mm2);• 1,8/3 kV unscreened, unsheathed (1,5 mm2 to 400 mm2); • 1,8/3 kV unscreened, sheathed (1,5 mm2 to 400 mm2); • 3,6/6 kV unscreened, sheathed (2,5 mm2 to 400 mm2).
Railway applications - Railway rolling stock power and control cables having special fire performance Part 3-1: Cables with crosslinked elastomeric insulation with reduced dimensions - Single core cables
Identne EN 50264-3-1:2005
Keel en
Tähtaeg 23.09.2005
32
prEN 50264-3-2
Part of EN 50264-3-2 specifies requirements for, and constructions and dimensions of, multicore cables of the following types and voltage ratings: • 300/500 V screened or unscreened (1 mm2, 1,5 mm2 and 2,5 mm2, number of cores from 2 to 40) • 0,6/1 kV screened or unscreened, (1 mm2 to 50 mm2, 2, 3 and 4 core)
Railway applications - Railway rolling stock power and control cables having special fire performance Part 3-2: Cables with crosslinked elastomeric insulation with reduced dimensions - Multicore cables.
Identne prEN 50264-3-2:2005
Keel en
Tähtaeg 23.09.2005
31 ELEKTROONIKAUUED STANDARDID
EVS-EN 60384-8:2005
is applicable to fixed capacitors of ceramic dielectric with a defined temperature coefficient (dielectric Class 1), intended for use in electronic equipment, including leadless capacitors but excluding fixed surface mount multilayer capacitors of ceramic dielectric.
Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
Hind 208,00Identne EN 60384-8:2005ja identne IEC 60384-8:2005
Keel enEVS-EN 60384-9:2005
Standard is applicable to fixed capacitors of ceramic dielectric with a defined temperature coefficient (dielectric Class 2), intended for use in electronic equipment, including leadless capacitors but excluding fixed surface mount multilayer capacitors of ceramic dielectric.
Fixed capacitors for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
Hind 180,00Identne EN 60384-9:2005ja identne IEC 60384-9:2005
Keel enEVS-EN 60384-8-1:2005
is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described.
Fixed capacitors for use in electronic equipment Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 – Assessment level EZ
Hind 123,00Identne EN 60384-8-1:2005ja identne IEC 60384-8-1:2005
Keel en
EVS-EN 60384-9-1:2005
Standard is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described.
Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 – Assessment level EZ
Hind 123,00Identne EN 60384-9-1:2005ja identne IEC 60384-9-1:2005
Keel enEVS-EN 61019-2:2005
Gives practical guidance to the use of surface acoustic wave (SAW) resonators which are used in telecommunications, radio equipments and consumer products. Is to be used in conjunction with IEC 61019-1.
Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
Hind 123,00Identne EN 61019-2:2005ja identne IEC 61019-2:2005
Keel enAsendab EVS-EN 61019-2:2002EVS-EN 61338-4:2005
Applies to waveguide type dielectric resonators as custom built products or as standard catalogue items whose quality is assessed on the basis of capability approval. Prescribes the preferred ratings and characteristics with the appropriate tests and measuring methods contained in IEC 61338-1, and gives the general performance requirements to be used in detail specifications for waveguide type dielectric resonators.
Waveguide type dielectric resonators Part 4: Sectional specification
Hind 104,00Identne EN 61338-4:2005ja identne IEC 61338-4:2005
Keel enEVS-EN 61338-4-1:2005
Is a blank detail specification and as such a supplementary document to the sectional specification IEC 61338-4. Contains requirements for the minimum content of detail specifications.
Waveguide type dielectric resonators Part 4-1: Blank detail specification
Hind 84,00Identne EN 61338-4-1:2005ja identne IEC 61338-4-1:2005
Keel en
33
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 61019-2:2002
SAW resonators are now widely used in a variety of applications: VCR RF-converters, CATV local oscillators, measuring equipment, remote control and so on. While SAW resonators are also applied to narrow bandwidth filters, the scope of this guide is limited to SAW resonators for oscillator applications.
Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
Identne EN 61019-2:1997ja identne IEC 61019-2:1995
Keel enAsendatud EVS-EN 61019-2:2005
KAVANDITE ARVAMUSKÜSITLUS
EN 62258-2
This part of IEC 62258 has been developed to facilitate the production, supply and use of semiconductor die products, including but not limited to - singulated bare die, - minimally or partially encapsulated die and wafers.
Semiconductor die products Part 2: Exchange data formats
Identne EN 62258-2:2005ja identne IEC 62258-2:2005
Keel en
Tähtaeg 10.09.2005
33 SIDETEHNIKAUUED STANDARDID
CLC/TS 61970-2:2005
Provides a glossary for the volume of work produced as part of the IEC 61970 series of publications. Supplies terms and abbreviations that are either specific to the series, or that require explanation because of the way that they are used.
Energy management system application program interface (EMS-API) Part 2: Glossary
Hind 132,00Identne CLC/TS 61970-2:2005ja identne IEC 61970-2:2004
Keel enEVS-EN 50117-2-1:2005
This sectional specification relates to EN 50117-1: Generic specification for coaxial cables, and should be read in conjunction with this generic standard. This specification applies to indoor drop cables for use in cabled distribution systems operating at temperature between –40 °C and +70 °C 1) and at frequencies between 5 MHz and 1 000 MHz and complying with the requirements of EN 50083.
Coaxial cables - Part 2-1: Sectional specifiction for cables used in cabled distribution networks -Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
Hind 104,00Identne EN 50117-2-1:2005
Keel enAsendab EVS-EN 50117-1:2002
EVS-EN 60118-13:2005
Covers all relevant EMC phenomena for hearing aids. EMC phenomena, such as RF emission and electrostatic discharge, are not currently known to be a significant problem in connection with hearing aids and are therefore not dealt with.
Kuuldeaparaadid. Osa 13: Elektromagnetiline ühilduvus (EMC)
Hind 162,00Identne EN 60118-13:2005ja identne IEC 60118-13:2004
Keel enAsendab EVS-EN 60118-13:2002EVS-EN 61850-10:2005
Specifies standard techniques for testing of conformance of implementations, as well as specific measurement techniques to be applied when declaring performance parameters. The use of these techniques will enhance the ability of the system integrator to integrate IEDs easily, operate IEDs correctly, and support the applications as intended.
Communication networks and systems in substations Part 10: Conformance testing
Hind 221,00Identne EN 61850-10:2005ja identne IEC 61850-10:2005
Keel enEVS-EN 62297-1:2005
specifies an application-triggering scheme for TV broadcasting information sent from a service provider as part of a data broadcasting transmission and intended to control an application in a receiver.
Triggering messages for broadcast applications Part 1: Format
Hind 113,00Identne EN 62297-1:2005ja identne IEC 62297-1:2005
Keel enEVS-EN 62297-2:2005
specifies how the trigger messages defined in IEC 62297-1 are transmitted. A trigger is defined as information sent from a service provider as part of a data broadcasting transmission that initiates an application in a receiver.
Triggering messages for broadcast applications Part 2: Transport methods
Hind 95,00Identne EN 62297-2:2005ja identne IEC 62297-2:2005
Keel enEVS-EN 62298-1:2005
Standard gives a general overview of the TeleWeb application that allows Web-style text and graphics to be broadcast to, and displayed by, suitable decoders
Teleweb application Part 1: General description
Hind 141,00Identne EN 62298-1:2005ja identne IEC 62298-1:2005
Keel en
34
EVS-EN 62298-2:2005
Standard specifies the transmission layer of TeleWeb for VBI and DVB broadcasts
Teleweb application Part 2: Delivery methods
Hind 208,00Identne EN 62298-2:2005ja identne IEC 62298-2:2005
Keel enEVS-EN 62298-3:2005
Standard specifies the TeleWeb Superteletext profile that allows Web-style text and graphics to be displayed on suitable decoders. A TeleWeb service comprises multimedia data files whose format and attributes are defined by this specification.
Teleweb application Part 3: Superteletext profile
Hind 305,00Identne EN 62298-3:2005ja identne IEC 62298-3:2005
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 50117-2-1:2003
This European standard relates to EN 50117-1 and should be read in conjunction with this generic specification. This standard applies to indoor drop cables for use in cabled distribution systems operating at temperatures between - 40 C and 70 C and at frequencies between 5MHz and 1000 MHz and complying with the requirements of EN 50083
Coaxial cables - Part 2-1: Sectional specifiction for cables used in cabled distribution networks -Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
Identne EN 50117-2-1:2002
Keel enAsendatud EVS-EN 50117-2-1:2005EVS-EN 60118-13:2002
This International standard covers all relevant EMC-phenomena for hearing aids. It specifies measurement methods and acceptance levels for hearing aid immunity to high frequency electromagnetic fields originating from digital telephone systems as specified in IEC 61000-4-3. Measurement methods for hearing aids with non-acoustic outputs and for hearing aids connected to other equipment by cables are not given in this standard.
Kuuldeaparaadid. Osa 13: Elektromagnetiline ühilduvus (EMC)
Identne EN 60118-13:1997ja identne IEC 60118-13:1997
Keel enAsendatud EVS-EN 60118-13:2002
KAVANDITE ARVAMUSKÜSITLUS
EN 50083-2:2002/A1
Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including equipment, systems and installations - for headend-reception, processing and distribution of television and sound signals and their associated data signals and - for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media.
Televisiooni-, heli- ja interaktiivse multimeedia signaalide kaabeljaotussüsteemid. Osa 2: Seadmete elektromagnetiline ühilduvus
Identne EN 50083-2:2001/A1:2005
Keel en
Tähtaeg 23.09.2005
35 INFOTEHNOLOOGIA. KONTORISEADMEDUUED STANDARDID
CEN/TS 14822-4:2005
It is now widely or even universally accepted that computer systems that are used within healthcare to record information about the care given to patient’s need to share that information with other computer systems and their users.
Health informatics - General purpose information components - Part 4: Message headers
Hind 141,00Identne CEN/TS 14822-4:2005
Keel enCWA 14729-1:2005
The present document provides different models described in UML (Unified Modeling Language) as a basis for the definition of a DTD or an XML schema of the Intrastat declaration, called INSTAT/XML and its optional response, called INSRES/XML.
The Intrastat System - Part 1: The Implementation Model
Hind 199,00Identne CWA 14729-1:2005
Keel enCWA 14729-2:2005
The purpose of this document is to provide the Message Implementation Guideline (MIG) of INSTAT/XML, the Intrastat declaration in XML.
The Intrastat System - Part 2: Message Implementation Guideline of INSTAT/XML
Hind 268,00Identne CWA 14729-2:2005
Keel enCWA 14729-3:2005
The purpose of this document is to provide the Message Implementation Guideline (MIG) of INSRES/XML, the response to the Intrastat declaration in XML.
The Intrastat System - Part 3: Message Implementation Guideline of INSRES/XML
Hind 199,00Identne CWA 14729-3:2005
Keel en
35
EVS-EN 62298-1:2005
Standard gives a general overview of the TeleWeb application that allows Web-style text and graphics to be broadcast to, and displayed by, suitable decoders
Teleweb application Part 1: General description
Hind 141,00Identne EN 62298-1:2005ja identne IEC 62298-1:2005
Keel enEVS-EN 62298-2:2005
Standard specifies the transmission layer of TeleWeb for VBI and DVB broadcasts
Teleweb application Part 2: Delivery methods
Hind 208,00Identne EN 62298-2:2005ja identne IEC 62298-2:2005
Keel enEVS-EN 62298-3:2005
Standard specifies the TeleWeb Superteletext profile that allows Web-style text and graphics to be displayed on suitable decoders. A TeleWeb service comprises multimedia data files whose format and attributes are defined by this specification.
Teleweb application Part 3: Superteletext profile
Hind 305,00Identne EN 62298-3:2005ja identne IEC 62298-3:2005
Keel enEVS-ISO/IEC 10026-1:2005
This part of ISO/IEC 10026: a) provides a general introduction to the concepts and mechanisms defined in ISO/IEC 10026; b) defines a model of distributed transaction processing; c) defines the requirements to be met by the OSI TP Service; and d) takes into consideration the need to coexist with other Application Service Elements, e.g. RDA (Remote Database Access), ROSE (Remote Operations Service Element), and non-ROSE based applications. This part of ISO/IEC 10026 makes sufficient provisions to allow the specification of transaction-mode communications services and protocols that meet the properties of: atomicity, consistency, isolation, and durability (the ACID properties), as defined in ISO/IEC 9804. This part of ISO/IEC 10026 does not specify individual implementations or products, nor does it constrain the implementation of entities or interfaces within a computer system.
Information technology — Open SystemsInterconnection — Distributed Transaction Processing — Part 1: OSI TP Model
Hind 221,00ja identne ISO/IEC 10026-1:1998
Keel en
EVS-ISO/IEC 18000-6:2005
This part of ISO/IEC 18000 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. Its purpose is to provide a common technical specification for RFID devices that may be used by ISO committees developing RFID application standards. This part of ISO/IEC 18000 is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. This part of ISO/IEC 18000 defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum EIRP, spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and where appropriate operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the airinterface. This part of ISO/IEC 18000 contains one mode with two types. Both types use a common return link and are reader talks first. Type A uses Pulse Interval Encoding (PIE) in the forward link, and an adaptive ALOHA collision arbitration algorithm. Type B uses Manchester in the forward link and an adaptive binary tree collision arbitration algorithm. The detailed technical differences between the two types are shown in the parameter tables.
Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz
Hind 343,00ja identne ISO/IEC 18000-6:2004
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN ISO 9241-400
This part of ISO 9241 gives guidelines for physical input devices for interactive systems. It provides guidance based on ergonomic factors for the following input devices: keyboards, mice, pucks, joysticks, trackballs, trackpads, tablets and overlays, touch sensitive screens, styli, and light pens, voice controlled devices, gesture controlled devices (see. 6.1.1).
Ergonomics of human--system interaction - Physical input devices - Part 400: Guiding principles, introduction and general design requirements
Identne prEN ISO 9241-400:2005ja identne ISO/DIS 9241-400:2005
Keel en
Tähtaeg 12.09.2005
36
43 MAANTEESÕIDUKITE EHITUSKAVANDITE ARVAMUSKÜSITLUS
HD 384.7.754 S1
The particular requirements of this section apply to the internal electrical installations of caravans and motor-caravans for rated voltage not exceeding 440 V.
Electrical installations of buildings Part 7: Requirements for special installations or locations Section 754: Electrical installations in caravans and motor-caravans
Identne HD 384.7.754 S1:2005ja identne IEC 60364-7-708:1988 + A1:1993
Keel enAsendab EVS-HD 384.7.708 S1:2003
Tähtaeg 10.09.2005
45 RAUDTEETEHNIKAUUED STANDARDID
EVS-EN 13796-1:2005
This European Standard specifies the safety requirements applicable to carriers for cableway installations designed to carry persons. It is applicable to the various types of installations and takes into account their environment.
Ohutusnõuded reisijateveoks köisraudteel. Kandurid. Osa 1: Haaratsid, karabiinid, toolid, T-latid ja platvormid
Hind 246,00Identne EN 13796-1:2005
Keel enEVS-EN 13796-2:2005
This European Standard specifies the safety requirements applicable to carriers for cableway installations designed to carry persons. It is applicable to the various types of installations and takes into account their environment.
Inimeste transportimiseks mõeldud köisteepaigaldiste ohutusnõuded. Kandurid. Osa 2: Haaratsite libisemiskindluse katsetamine.
Hind 84,00Identne EN 13796-2:2005
Keel enEVS-EN 13796-3:2005
This European Standard specifies the safety requirements applicable to carriers for cableway installations for passenger transportation. This standard is applicable to the various types of installations and takes into account their environment.
Inimeste transportimiseks mõeldud köisteepaigaldiste ohutusnõuded. Kandurid. Osa 3: Väsimuskatsed
Hind 104,00Identne EN 13796-3:2005
Keel en
EVS-EN 50124-1:2002/A2:2005
The whole document deals with insulation coordination in railways. It applies to equipment for use in signalling, rolling stock and fixed installations up to 2000 m above sea level
Raudteealased rakendused. Isolatsiooni koordinatsioon. Osa 1: Põhinõuded. Elektri- ja elektroonikaseadmete õhk- ja ülelöögivahemikud
Hind 73,00Identne EN 50124-1:2001/A2:2005
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 50264-1
Part 1 of EN 50264 specifies the general requirements applicable to the cables given in all other parts of EN 50264. It includes the detailed requirements for the insulating and sheathing materials and other components called up in the separate Parts.
Railway applications - Railway rolling stock power and control cables having special fire performance Part 1: General requirements
Identne prEN 50264-1:2005
Keel enAsendab EVS-EN 50264-1:2003
Tähtaeg 10.09.2005
prEN 50264-2-2
Part 2-2 of EN 50264 specifies requirements for, and constructions and dimensions of, multicore cables of the following types and voltage ratings: • 300/500 V screened or unscreened (1 mm2, 1,5 mm2 and 2,5 mm2, number of cores from 2 to 40); • 0,6/1 kV screened or unscreened, (1 mm2 to 50 mm2, 2, 3 and 4 core).
Railway applications - Railway rolling stock power and control cables having special fire performance Part 2-2: Cables with crosslinked lastomeric insulation - Multicore cables
Identne prEN 50264-2-2:2005
Keel enAsendab EVS-EN 50264-3:2003
Tähtaeg 23.09.2005
prEN 50264-3-1
Part 3-1 of EN 50264 specifies requirements for, and constructions and dimensions of, single core cables of the following types and voltage ratings:• 0,6/1 kV unscreened, unsheathed (1 mm2 to 400 mm2);• 1,8/3 kV unscreened, unsheathed (1,5 mm2 to 400 mm2); • 1,8/3 kV unscreened, sheathed (1,5 mm2 to 400 mm2); • 3,6/6 kV unscreened, sheathed (2,5 mm2 to 400 mm2).
Railway applications - Railway rolling stock power and control cables having special fire performance Part 3-1: Cables with crosslinked elastomeric insulation with reduced dimensions - Single core cables
Identne EN 50264-3-1:2005
Keel en
Tähtaeg 23.09.2005
37
prEN 50264-3-2
Part of EN 50264-3-2 specifies requirements for, and constructions and dimensions of, multicore cables of the following types and voltage ratings: • 300/500 V screened or unscreened (1 mm2, 1,5 mm2 and 2,5 mm2, number of cores from 2 to 40) • 0,6/1 kV screened or unscreened, (1 mm2 to 50 mm2, 2, 3 and 4 core)
Railway applications - Railway rolling stock power and control cables having special fire performance Part 3-2: Cables with crosslinked elastomeric insulation with reduced dimensions - Multicore cables.
Identne prEN 50264-3-2:2005
Keel en
Tähtaeg 23.09.2005
47 LAEVAEHITUS JA MERE-EHITISEDKAVANDITE ARVAMUSKÜSITLUS
prEN 15271
This European Standard specifies requirements for anchor equipment for inland navigation vessels.
Inland navigation vessels - Studless anchor chain - Anchor equipment
Identne prEN 15271:2005
Keel en
Tähtaeg 29.08.2005
prEN 15272-2
This European Standard specifies requirements for fairleads on inland navigation vessels. It applies to fairleads for guiding ropes perpendicularly to the fairlead axis. It is used, for example, for hauling, mooring and coupling inland navigation vessels.
Inland navigation vessels - Rope leading - Part 2: Fairlead
Identne prEN 15272-2:2005
Keel en
Tähtaeg 16.09.2005
prEN ISO 16180
This International Standard specifies requirements and gives guidelines for the design, construction, performance, placement and installation of electric navigation lights for recreational craft under 20 m length of hull.
Small craft - Electric navigation lights
Identne prEN ISO 16180:2005ja identne ISO/DIS 16180:2005
Keel en
Tähtaeg 27.09.2005
49 LENNUNDUS JA KOSMOSETEHNIKAUUED STANDARDID
EVS-EN 4408-001:2005
This standard specifies the general rules for the representation of parts made of composite materials, in technical drawings. It applies to aerospace structures using composites materials, and their applications when this standard is specified.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
Hind 95,00Identne EN 4408-001:2005
Keel en
EVS-EN 4408-002:2005
This standard specifies the rules for the representation of laminated parts as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts
Hind 123,00Identne EN 4408-002:2005
Keel enEVS-EN 4408-003:2005
This standard specifies the rules for the representation of parts including core materials as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials
Hind 123,00Identne EN 4408-003:2005
Keel enEVS-EN 4408-004:2005
This standard specifies the rules for the representation of items in composite materials obtained by winding as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding
Hind 95,00Identne EN 4408-004:2005
Keel enEVS-EN 4408-005:2005
This standard specifies the representation of seams of composite materials as well as the information to be indicated in technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams
Hind 123,00Identne EN 4408-005:2005
Keel enEVS-EN 4408-006:2005
This standard specifies the rules for the representation of preforms of composite materials as well as the information to be indicated in the technical drawings.
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms
Hind 104,00Identne EN 4408-006:2005
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 2002-001
This standard specifies the requirements for the tensile testing of metallic materials at ambient temperature for aerospace applications.
Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature
Identne prEN 2002-001:2005
Keel en
Tähtaeg 11.09.2005
38
prEN 2002-002
This standard specifies the requirements for the tensile testing of metallic materials at elevated temperature for aerospace applications.
Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
Identne prEN 2002-002:2005
Keel en
Tähtaeg 11.09.2005
prEN 2072 rev
Standard määrab kindlaks nõuded alumiiniumist AL-P1050A valmistatud lehtede ja ribade kohta (lehtede ja ribade paksus on 0,4 mm < või = a < või = 6 mm), mida kasutatakse lennunduses ja kosmonautikas H14 tingimustes.
Lennunduse ja kosmonautika seeria. Alumiinium AL-P1050A H 14. Leht ja riba 0,4 mm < või = a < või 6 mm
Identne prEN 2072:2005
Keel enAsendab EVS-EN 2072:2000
Tähtaeg 17.09.2005
prEN 2084
This standard specifies the characteristics, test methods, qualification and acceptance conditions of singlecore electric cables for general purpose with conductors in copper or copper alloy, intended for installation in aircraft circuits.
Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification
Identne prEN 2084:2005
Keel en
Tähtaeg 11.09.2005
prEN 2087
This standard specifies the requirements relating to:Aluminium alloy AL-P2014AT6 or T62Clad sheet and strip0,4 mm ≤ a ≤ 6 mmfor aerospace applications.
Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm
Identne prEN 2087:2005
Keel en
Tähtaeg 16.09.2005
prEN 2243-2 rev
Standard määrab kindlaks teimikehade mõõtmed ja teimimeetodi konstruktsiooniliimide tugevuse määramiseks metalli metallilt rebimisel keskkonna temperatuuril ja muudel temperatuuridel. See menetlus ei sobi kasutamiseks selliste liimide korral, mille keskmine nihkepinge on väiksem kui 30 N 25 mm kohta.
Lennunduse ja kosmonautika seeria. Konstruktsiooniliimid. Katsemeetodid. Osa 2: Metalli metallilt rebimise teim
Identne prEN 2243-2:2005
Keel enAsendab EVS-EN 2243-2:2000
Tähtaeg 17.09.2005
prEN 2243-1
The objective of this standard is to establish the test methods for defining the strength of suitable structural adhesives in metal to metal single lap shear, at ambient and other temperatures.
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
Identne prEN 2243-1:2005
Keel en
Tähtaeg 23.09.2005
prEN 2243-3 rev
Standard määrab kindlaks teimimeetodi konstruktsiooniliimide nihketugevuse määramiseks kärgsüdamikuga metallil keskkonna temperatuuril ja muudel temperatuuridel.
Lennunduse ja kosmonautika seeria - Konstruktsiooniliimid - Teimimeetodid - Osa 3: Rebiteim: metall-kärgsüdamik
Identne prEN 2243-3:2005
Keel enAsendab EVS-EN 2243-3:2000
Tähtaeg 17.09.2005
prEN 2243-4 rev
Standard määrab kindlaks teimimeetodid konstruktsiooniliimi tugevuse määramiseks lamedakujulistel metall-kärgkonstruktsioonidel keskkonna temperatuuril ja muudel temperatuuridel.
Lennunduse ja kosmonautika seeria. Konstruktsiooniliimid. Katsemeetodid. Osa 4: Metall-kärgsüdamikuga lamedakujulise konstruktsiooni tõmbekatse
Identne prEN 2243-4:2005
Keel enAsendab EVS-EN 2243-4:2000
Tähtaeg 17.09.2005
prEN 2243-5 rev
Standard määrab kindlaks vanandamisteimid, määramaks liimühenduste vastupanu keskkonna mõjudele.
Lennunduse ja kosmonautika seeria. Konstruktsiooniliimid. Katsemeetodid. Osa 5: Vanandamisteimid
Identne prEN 2243-5:2005
Keel enAsendab EVS-EN 2243-5:2000
Tähtaeg 17.09.2005
prEN 2243-6
This standard defines the general requirements for the determination of shear stress and shear strain behaviour of structural adhesives by testing in tension metal to metal lap joints, at ambient or other temperatures.
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
Identne prEN 2243-6:2005
Keel en
Tähtaeg 16.09.2005
39
prEN 2266-002
This standard specifies the list of product standards and common characteristics of electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 200 °C (unless otherwise specified in product standards).
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 002: General
Identne prEN 2266-002:2005
Keel en
Tähtaeg 20.09.2005
prEN 2266-003
This standard specifies the characteristics of ink jet printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 200 °C.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard
Identne prEN 2266-003:2005
Keel en
Tähtaeg 20.09.2005
prEN 2266-005
This standard specifies the characteristics of UV laser printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 200 °C.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 005: UV laser printable - Product standard
Identne prEN 2266-005:2005
Keel en
Tähtaeg 20.09.2005
prEN 2266-007
This standard specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 200 °C.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard
Identne prEN 2266-007:2005
Keel en
Tähtaeg 20.09.2005
prEN 2267-002
This standard specifies the list of product standards and common characteristics of electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C (except otherwise specified in product standards).
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: General
Identne prEN 2267-002:2005
Keel en
Tähtaeg 17.09.2005
prEN 2267-003
This standard specifies the characteristics of ink jet printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 003: Ink jet printable - Product standard
Identne prEN 2267-003:2005
Keel en
Tähtaeg 17.09.2005
prEN 2267-005
This standard specifies the characteristics of UV laser printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 005: UV laser printable - Product standard
Identne prEN 2267-005:2005
Keel en
Tähtaeg 17.09.2005
prEN 2267-007
This standard specifies the characteristics of ink jet printable electrical lightweight cables DMA family for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C. Nevertheless, if needed, − 65 °C is also acceptable as shown by cold test.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard
Identne prEN 2267-007:2005
Keel en
Tähtaeg 17.09.2005
prEN 2267-008
This standard specifies the characteristics of UV laser printable electrical lightweight cables DM family for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C. Nevertheless, if needed, − 65 °C is also acceptable as shown by cold test.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 008: DM family, single UV laser printable and multicore assembly - Product standard
Identne prEN 2267-008:2005
Keel en
Tähtaeg 17.09.2005
prEN 2267-009
This standard specifies the characteristics of electrical lightweight cables DRA family for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C. Nevertheless, if needed, −65 °C is also acceptable as shown by cold test.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard
Identne prEN 2267-009:2005
Keel en
Tähtaeg 17.09.2005
40
prEN 2267-010
This standard specifies the characteristics of UV laser printable electrical lightweight cables DR family for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C. Nevertheless, if needed, − 65 °C is also acceptable as shown by cold test.
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
Identne prEN 2267-010:2005
Keel en
Tähtaeg 17.09.2005
prEN 2591-100
This standard specifies the general requirements for the methods of testing elements of electrical, optical and data transmission system connections used in aerospace applications.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
Identne prEN 2591-100:2005
Keel en
Tähtaeg 12.09.2005
prEN 2591-212
This Standard specifies methods for measuring the surface transfer impedance and shielding effectiveness up to 1 GHz of a connector, or a connector fitted with an accessory and terminated with a cable. The purpose of the test is to ensure that the complete assembly shall have a continuous 360° shielding capability throughout its length.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance
Identne prEN 2591-212:2005
Keel n
Tähtaeg 11.09.2005
prEN 2591-214
This standard specifies a method of measuring the ability of an element of connection to withstand specified severities of simulated lightning strikes, both current pulse and voltage pulse.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
Identne prEN 2591-214:2005
Keel en
Tähtaeg 11.09.2005
prEN 2591-220
This standard specifies a method to demonstrate the long term electrical stability of the conductor to contact joint in the EN 3155 series of product standards. The thermal cycling test is carried out using a combination of conductor current and “ambient” heat to achieve the appropriate maximum rated operating temperature.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling
Identne prEN 2591-220:2005
Keel en
Tähtaeg 29.08.2005
prEN 2591-423
This standard specifies a method to verify the ability of the accessory thread of the connector to withstand stresses.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength
Identne prEN 2591-423:2005
Keel en
Tähtaeg 29.08.2005
prEN 2591-515
This standard specifies a test method for determination of the relative rate of absorption of water by plastic or composite material.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability
Identne prEN 2591-515:2005
Keel en
Tähtaeg 10.09.2005
prEN 2591-609
This standard specifies three methods of checking the effectiveness of cable attachment in the cyclic flexing mode for optical connection elements (including permanent connections) and fibre optic couplers.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing
Identne prEN 2591-609:2005
Keel en
Tähtaeg 11.09.2005
prEN 2632 rev
Standard määrab kindlaks nõuded alumiiniumisulamist AL-P7075 pressitud varbmaterjalide ja profiilmetalli kohta (a või D < 100 mm), mille pinna jämedakristallilisust kontrollitakse, kasutamisel tingimustes T73511 lennunduses ja kosmonautikas.
Lennunduse ja kosmonautika seeria. Alumiiniumisulam AL-P7075-T73511. Pressitud vardad ja profiilmetall, a või D < või = 100 mm, mille pinna jämedakristallilisust kontrollitakse
Identne prEN 2632:2005
Keel enAsendab EVS-EN 2632:2000
Tähtaeg 17.09.2005
prEN 2635
This standard specifies the requirements relating to:Aluminium alloy AL-P2014AT6511Extruded bar and sectiona or D ≤ 200 mmwith peripheral coarse grain controlfor aerospace application.
Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D ≤ 200 mm with peripheral coarse grain control
Identne prEN 2635:2005
Keel en
Tähtaeg 11.09.2005
41
prEN 2702
This standard specifies the requirements relating to:Aluminium alloy AL-P6061-T6 or T62Drawn or extruded bar and sectiona or D ≤ 200 mmfor aerospace application.
Aerospace series - Aluminium alloy AL-P6061- - T6 or T62 - Drawn or extruded bar and section - a or D ≤200 mm
Identne prEN 2702:2005
Keel en
Tähtaeg 11.09.2005
prEN 2853
This standard specifies current rating data for cables produced with conductors as defined in EN 2083.
Aerospace series - Current ratings for electrical cables with conductor EN 2083
Identne prEN 2853:2005
Keel en
Tähtaeg 11.09.2005
prEN 3155-003
This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 003, type A, crimp, class S used in elements of connection according to EN 3155-002.
Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard
Identne prEN 3155-003:2005
Keel en
Tähtaeg 16.09.2005
prEN 3155-008
This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002.
Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard
Identne prEN 3155-008:2005
Keel en
Tähtaeg 16.09.2005
prEN 3155-018
This standard specifies the required characteristics, tests and tooling applicable to male contacts 018, type A, crimp, class S, used in elements of connection according to EN 3155-002.
Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard
Identne prEN 3155-018:2005
Keel en
Tähtaeg 17.09.2005
prEN 3155-019
This standard specifies the required characteristics, tests and tooling applicable to female contacts 019, type A, crimp, class S, used in elements of connection according to EN 3155-002.
Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard
Identne prEN 3155-019:2005
Keel en
Tähtaeg 17.09.2005
prEN 3155-045
This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002.
Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard
Identne prEN 3155-045:2005
Keel en
Tähtaeg 17.09.2005
prEN 3338
This standard specifies the requirements relating to:Aluminium alloy AL-P7050-T74511Extruded bar and sectiona or D ≤ 150 mmwith peripheral coarse grain controlfor aerospace application.
Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control
Identne prEN 3338:2005
Keel en
Tähtaeg 11.09.2005
prEN 3342
This standard specifies the requirements relating to:Aluminium alloy AL-P6061-T4 or T42Drawn or extruded bar and sectiona or D ≤ 150 mmfor aerospace application.
Aerospace series - Aluminium alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D ≤150 mm
Identne prEN 3342:2005
Keel en
Tähtaeg 11.09.2005
prEN 3344
This standard specifies the requirements relating to:Aluminium alloy AL-P7050-T76511Extruded bar and sectiona or D ≤ 150 mmwith peripheral coarse grain controlfor aerospace application.
Aerospace series - Aluminium alloy AL-P7050 - T76511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control
Identne prEN 3344:2005
Keel en
Tähtaeg 11.09.2005
42
prEN 3347
This standard specifies the requirements relating to:Aluminium alloy AL-P2024-T8511Extruded bar and sectiona or D ≤ 150 mmwith peripheral coarse grain controlfor aerospace application.
Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control
Identne prEN 3347:2005
Keel en
Tähtaeg 16.09.2005
prEN 3545-001
This standard specifies the technical requirements of rectangular connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C.
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification
Identne prEN 3545-001:2005
Keel en
Tähtaeg 16.09.2005
prEN 3545-002
This standard specifies conditions which are common to rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C.
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements
Identne prEN 3545-002:2005
Keel en
Tähtaeg 16.09.2005
prEN 3545-003
This standard specifies connectors with female contacts in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C.
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard
Identne prEN 3545-003:2005
Keel en
Tähtaeg 16.09.2005
prEN 3545-004
This standard specifies connectors with male contacts in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic shell, locking device, for operating temperatures from – 55 °C to 175 °C.
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard
Identne prEN 3545-004:2005
Keel en
Tähtaeg 16.09.2005
prEN 3545-007
This standard specifies cable clamp in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C.
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard
Identne prEN 3545-007:2005
Keel en
Tähtaeg 17.09.2005
prEN 3645-001
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors, fire-resistant, intended for use in a temperature range from − 65 °C to 175 °C continuous or 200 °C continuous according to the classes and models.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
Identne prEN 3645-001:2005
Keel en
Tähtaeg 23.09.2005
prEN 3645-002
This standard defines the performances and contact arrangements for threaded ring coupling circular connectors, fire-resistant or non fire-resistant, intended for use in a temperature range from − 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
Identne prEN 3645-002:2005
Keel en
Tähtaeg 23.09.2005
prEN 3646-002
This standard defines the performances and contact arrangements groups for bayonet coupling circular connectors, intended for use in an operating temperature range of − 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
Identne prEN 3646-002:2005
Keel en
Tähtaeg 23.09.2005
prEN 3719
This standard specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of conductors in aluminium or aluminium alloy for electrical cables for aerospace applications.
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
Identne prEN 3719:2005
Keel en
Tähtaeg 11.09.2005
43
prEN 3745-202
This standard specifies several methods for measuring the diameter of an optical fibre or cable, the non-circularity and the concentricity of the fibre core/cladding on an optical fibre.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensionsf
Identne prEN 3745-202:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-306
This standard specifies a method for checking the variation of attenuation of an optical cable during temperature cycling.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling
Identne prEN 3745-306:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-401
This standard specifies a method to determine the effects of accelerated ageing on an optical fibre or cable.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing
Identne prEN 3745-401:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-402
This standard specifies a method for temperature cycling of an optical cable.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling
Identne prEN 3745-402:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-404
This standard specifies a method to determine the effects of thermal shock on an optical fibre or cable.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
Identne prEN 3745-404:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-406
This standard specifies a method to determine the ability of an optical fibre cable to withstand bending at low temperature.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test
Identne prEN 3745-406:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-407
This standard specifies a method to determine the resistance of an optical cable to the flame of a Bunsen burner.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability
Identne prEN 3745-407:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-412
This standard specifies a method for checking the resistance of optical fibre to differing levels of humidity.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
Identne prEN 3745-412:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-501
This standard specifies a method of determining the optical fibre proof test.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test
Identne prEN 3745-501:2005
Keel en
Tähtaeg 17.09.2005
prEN 3745-502
This standard specifies a method of determining the tensile strength test for short length of optical fibre.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres
Identne prEN 3745-502:2005
Keel en
Tähtaeg 17.09.2005
prEN 3745-503
This standard specifies a method for testing the resistance of an optical to scrape abrasion.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
Identne prEN 3745-503:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-512
This standard specifies a method for testing flexure endurance of the cable when it is subjected to alternating flexing.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance
Identne prEN 3745-512:2005
Keel n
Tähtaeg 10.09.2005
prEN 3745-513
This standard specifies a method to determine the ability of an optical fibre cable to withstand crushing under specified environmental conditions.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance
Identne prEN 3745-513:2005
Keel en
Tähtaeg 10.09.2005
prEN 3745-703
This standard specifies a method for testing the permanence of the manufacturer's marking on finished cables.
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking
Identne prEN 3745-703:2005
Keel en
Tähtaeg 10.09.2005
44
prEN 4165-001
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for rectangular connectors with multiple removable modules, intended for use in a temperature range from − 55 °C to 175 °C continuous.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification
Identne prEN 4165-001:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-002
This standard defines a number of conditions common to rectangular electrical modular connectors for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating temperature 175 °C.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
Identne prEN 4165-002:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-004
This standard defines the stackable mounting receptacle series 2, for 2 or 4 modules used in the family of rectangular electrical modular connectors, operating temperature 175 °C continuous. The plug corresponding to those receptacle are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 - Product standard
Identne prEN 4165-004:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-005
This standard defines the stackable mounting receptacle series 3, for 2 or 4 modules used in the family of rectangular electrical modular connectors, operating temperature 175 °C continuous. The plug corresponding to those receptacle are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 - Product standard
Identne prEN 4165-005:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-006
This standard defines the plug series 2, for 2 and 4 modules used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 006: Plug for 2 and 4 modules, series 2 - Product standard
Identne prEN 4165-006:2005
Keel en
Tähtaeg 23.09.2005
prEN 4165-007
This standard defines the plug series 3, for 2 and 4 modules used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard
Identne prEN 4165-007:2005
Keel en
Tähtaeg 23.09.2005
prEN 4165-008
This standard defines the rack and panel plug for 2 and 4 modules, series 2 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard
Identne prEN 4165-008:2005
Keel en
Tähtaeg 23.09.2005
prEN 4165-009
This standard defines the rack and panel plug for 2 and 4 modules, series 3 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard
Identne prEN 4165-009:2005
Keel en
Tähtaeg 23.09.2005
prEN 4165-010
This standard defines the rack and panel rear mounted plug 2 and 4 modules, series 2 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard
Identne prEN 4165-010:2005
Keel en
Tähtaeg 24.09.2005
prEN 4165-011
This standard defines the flange mounting receptacle 2 and 4 modules, series 2 used in the family of rectangular electrical connectors. The plugs corresponding to those receptacles are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard
Identne prEN 4165-011:2005
Keel en
Tähtaeg 24.09.2005
45
prEN 4165-012
This standard defines the flange mounting receptacle 2 and 4 modules, series 3 used in the family of rectangular electrical connectors. The plugs corresponding to those receptacles are defined in EN 4165-002.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard
Identne prEN 4165-012:2005
Keel en
Tähtaeg 24.09.2005
prEN 4165-013
This standard defines cable clamp 2 and 4 modules for connectors, series 2 and series 3 used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard
Identne prEN 4165-013:2005
Keel en
Tähtaeg 24.09.2005
prEN 4165-014
This standard defines the shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product sta
Identne prEN 4165-014:2005
Keel en
Tähtaeg 24.09.2005
prEN 4165-015
This standard defines the round chimney for accessories (1 per module cavity) used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 015: Round chimney for accessory (1 per module cavity) - Product standard
Identne prEN 4165-015:2005
Keel en
Tähtaeg 24.09.2005
prEN 4165-016
This standard defines the double oval chimney for accessories (1 per 2 modules) used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 016: Double oval chimney for accessory (1 per 2 modules) - Product standard
Identne prEN 4165-016:2005
Keel en
Tähtaeg 24.09.2005
prEN 4165-017
This standard defines the blank chimney for accessories (1 per module cavity) used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 017: Blank chimney for accessory (1 per module cavity) - Product standard
Identne prEN 4165-017:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-018
This standard defines the protective cover for receptacle 2 and 4 modules, series 2 and series 3 used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for receptacle 2 and 4 modules, series 2 and series 3 - Product standard
Identne prEN 4165-018:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-020
This standard defines the coupling system keyway for receptacle used in the family of rectangular connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 020: Coupling system keyway for receptacle - Product standard
Identne prEN 4165-020:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-021
This standard defines the coupling system keyway for plug used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 021: Coupling system keyway for plug - Product standard
Identne prEN 4165-021:2005
Keel en
Tähtaeg 20.09.2005
prEN 4165-022
This standard defines the insertion/extraction tool for removal of modules used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard
Identne prEN 4165-022:2005
Keel en
Tähtaeg 20.09.2005
46
prEN 4165-023
This standard defines the tooling for assembly of receptacle coding component used in the family of rectangular electrical connectors.
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 023: Tooling for assembly of receptacle coding component - Product standard
Identne prEN 4165-023:2005
Keel en
Tähtaeg 20.09.2005
prEN 4175
This standard specifies the characteristics of flanged swage collars, sheartype, in titanium TI-P99002, metric series, for maximum operating temperature 315 °C and composite applications.
Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series
Identne prEN 4175:2005
Keel en
Tähtaeg 20.09.2005
prEN 4179 rev
This standard establishes the minimum requirements for the qualification and certification of personnel involved in non-destructive testing (NDT). These requirements include training, experience and examinations for personnel performing NDT in the aerospace manufacturing, service, maintenance and overhaul industries.
Aerospace series - Qualification and approval of personnel for non-destructive testing
Identne prEN 4179:2005
Keel enAsendab EVS-EN 4179:2000
Tähtaeg 20.09.2005
prEN 4434
This standard specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of lightweight conductors, normal and tight tolerances, in copper or copper alloy for electrical cables for aerospace applications.
Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
Identne prEN 4434:2005
Keel en
Tähtaeg 11.09.2005
prEN 4458
This standard specifies the characteristics, qualification and acceptance requirements for studs with MJ threads in TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel.
Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
Identne prEN 4458:2005
Keel en
Tähtaeg 17.09.2005
prEN 4459
This standard specifies the use and installation hole dimensions for EN standard, studs, in TI-P64001, with serrated locking ring in corrosion resisting steel, for aerospace applications and provisions for component salvage.
Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard
Identne prEN 4459:2005
Keel en
Tähtaeg 17.09.2005
prEN 4460
This standard specifies the conditions of installation and removal of studs with serrated locking ring in corrosion resisting steel defined by EN 4421, for aerospace applications.
Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure
Identne prEN 4460:2005
Keel en
Tähtaeg 17.09.2005
prEN 4615
This standard specifies the requirements relating to Magnesium alloy MG-C18002 T4 Sand casting for aerospace applications.
Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting
Identne prEN 4615:2005
Keel en
Tähtaeg 17.09.2005
prEN 4616
This standard specifies the requirements relating to Magnesium alloy MG-C18002 T4 Chill casting for aerospace applications.
Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting
Identne prEN 4616:2005
Keel en
Tähtaeg 17.09.2005
53 TÕSTE- JA TEISALDUS-SEADMEDUUED STANDARDID
EVS-EN 13414-1:2003/A1:2005
This European Standard specifies the construction requirements, calculation of WLL, verification, certification and marking of steel wire rope slings for general lifting service. It covers single-, two-, three- and four-leg slings, with ferrule-secured or spliced eye terminations and spliced or ferrule-secured endless slings made from 8 mm to 60 mm diameter 6 strand ordinary lay steel wire rope with fibre or steel core and 8 strand ordinary lay steel wire rope with a steel core conforming to EN 12385-4
Terastraadist trosside tropid. Ohutus. Osa 1: Tropid üldiste tõsteteenuste osutamiseks
Hind 62,00Identne EN 13414-1:2003/A1:2004
Keel en
47
KAVANDITE ARVAMUSKÜSITLUS
prEN ISO 15236-1
This part of ISO 15236 specifies the performance and constructional requirements applicable to conveyor belts having steel cords in the longitudinal direction as reinforcement. The requirements for construction given in Clause 6 apply to the design of single belts as well as the design of complete type series such as those covered in ISO 15236-2.
Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
Identne prEN ISO 15236-1:2005ja identne ISO/FDIS 15236-1:2005
Keel en
Tähtaeg 12.09.2005
59 TEKSTIILI- JA NAHATEHNOLOOGIAUUED STANDARDID
EVS-ISO 9239-2:2005
This part of ISO 9239 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover). This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results. This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
Hind 171,00ja identne ISO 9239-2:2002
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN ISO 2419 rev
This International Standard specifies the preparation of leather test pieces for physical and mechanical testing together with two standard atmospheres for conditioning and testing.
Leather - Physical and mechanical tests - Sample preparation and conditioning
Identne prEN ISO 2419:2005ja identne ISO 2419:2005
Keel enAsendab EVS-EN ISO 2419:2003
Tähtaeg 19.09.2005
61 RÕIVATÖÖSTUSUUED STANDARDID
CEN/TR 15118:2005
This Technical Report describes different methods of integration of touch and close fasteners to the final or finished product, such as: Sewing, mechanical attachment, adhesive pressure sensitive, heat activated, welded attachment, moulding in, straps, non-continous application in various widths, together with the appropriate test method.
Testing guidelines for touch and close fasteners
Hind 84,00Identne CEN/TR 15118:2005
Keel enEVS-EN ISO 19952:2005
This International Standard defines terms used in the footwear industry, in English, French, Spanish and Italian. The terms and their definitions are listed alphabetically in English.
Footwear - Vocabulary
Hind 286,00Identne EN ISO 19952:2005ja identne ISO 19952:2005
Keel en
65 PÕLLUMAJANDUSUUED STANDARDID
CEN/TR 15106:2005
This Technical Report covers the results from two ring tests (A and B, see Introduction) to compare the repeatability and reproducibility of the standardized method for the determination of EDDHA and EDDHMA by ion chromatography (EN 13368-2:2001) with a non-standardized alternative method using ion-pair chromatography ("Lucena-method", given in Annex A).
Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of nonstandardized Lucena method with EN 13368-2:2001
Hind 180,00Identne CEN/TR 15106:2005
Keel enEVS-EN 60335-2-86:2003/A1:2005
Deals with the safety of electric fishing machines, in which water may be electrified for catching fish or providing barriers to animals living in water. Examples are mains-operated and battery-operated electric fishing machines.
Majapidamismasinad ja nende sarnased elektriseadmed. Ohutus. Osa 2-86: Erinõuded elektriliste kalapüügimasinatele
Hind 84,00Identne EN 60335-2-86:2003/A1:2005ja identne IEC 60335-2-86:2002/A1:2005
Keel en
48
EVS-EN ISO 13903:2005
This International Standard describes the determination of free (synthetic and natural) and total (peptide-bound and free) amino acids in feeding stuffs, using an amino acid analyser or HPLC equipment.
Animal feeding stuffs - Determination of amino acids content
Hind 151,00Identne EN ISO 13903:2005ja identne ISO 13903:2005
Keel enEVS-ISO 11094:2005
Käesolev rahvusvaheline standard kirjeldab üksikasjalikult A-korrigeeritud helirõhu tasemete mõõtmise meetodeid mikrofonide kindlaksmääratud asukohde juures nii masina statsionaarses kui ka liikuvas olekus. Nende väärtuste põhjal arvutatakse välja masina A-korrigeeritud helivõimsuse tase
Akustika. Katsetuseeskiri mootorajamiga muruniidukite, murutraktorite, muru- ja aiatraktorite, professionaalsete niidukite ning niiduklisaseadmetega muru-ja aiatraktorite poolt tekitatud õhumüra mõõtmiseks
Hind 123,00ja identne ISO 11094:1991
Keel et
KAVANDITE ARVAMUSKÜSITLUS
prEN 1482-1 rev
See Euroopa standard määratleb ja/või kirjeldab proovide võtmise graafikut, proovide võtmise meetodeid, proovide koguse vähendamise ja osadeks jaotamise meetodeid. Standard kehtestab nõuded proovide võtmise aruandele. Seda Euroopa standardit rakendatakse nende väetiste ja lubiväetiste saadetiste korral, mis on tarnitud kolmandatele pooltele hulgimüügiks nende omal vastutusel selle kohta, et iga väiksemgi kaubasaadetis peab alluma kohalikele, riiklikele või regionaalsetele normatiividele.
Proovide võtmine tahketest väetistest ja lubiväetistest
Identne prEN 1482-1:2005
Keel enAsendab EVS-EN 1482:2000
Tähtaeg 20.09.2005
prEN 1482-2 rev
See Euroopa standard määratleb ja/või kirjeldab proovide võtmise graafikut, proovide võtmise meetodeid, proovide koguse vähendamise ja osadeks jaotamise meetodeid. Standard kehtestab nõuded proovide võtmise aruandele. Seda Euroopa standardit rakendatakse nende väetiste ja lubiväetiste saadetiste korral, mis on tarnitud kolmandatele pooltele hulgimüügiks nende omal vastutusel selle kohta, et iga väiksemgi kaubasaadetis peab alluma kohalikele, riiklikele või regionaalsetele normatiividele.
Proovide võtmine tahketest väetistest ja lubiväetistest
Identne prEN 1482-2:2005
Keel enAsendab prEN 1482-2 rev
Tähtaeg 20.09.2005
prEN ISO 16634
This International Standard specifies a method for the determination of the total nitrogen content and the calculation of crude protein content of cereals, pulses, milled cereal products, oilseeds and animal feeding stuffs.
Cereals, pulses, milled cereal products, oilseeds and animal feeding stuffs -- Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content
Identne prEN ISO 16634:2005ja identne ISO/FDIS 16634:2005
Keel en
Tähtaeg 27.09.2005
67 TOIDUAINETE TEHNOLOOGIAUUED STANDARDID
EVS-EN 12014-3:2005
This document specifies a spectrometric method for the determination of nitrate and nitrite content of meat products and has been validated for different meat products with a content of 9 mg/kg to 21 mg/kg nitrite calculated as sodium nitrite and 23 mg/kg to 48 mg/kg nitrate calculated as sodium nitrate.
Foodstuffs - Determination of nitrate and/or nitrite content of meat products - Part 3: Spectrometric determination of nitrate and nitrite content after enzymatic reduction of nitrate to nitrite
Hind 113,00Identne EN 12014-3:2005
Keel enEVS-EN 12875-1:2005
This European Standard specifies a method for testing the resistance of domestic articles made from ceramic, glass, glass ceramic, vitreous enamel, metal and plastics under the combined chemical, thermal and mechanical stresses of mechanical dishwashing in domestic dishwashers.
Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles
Hind 104,00Identne EN 12875-1:2005
Keel enEVS-EN 13885:2005
This European Standard specifies safety and hygiene requirements to minimise the hazards which can arise during the commissioning, the use and the maintenance of clipping machines for portioning and closing of casings filled with foodstuffs, and intended to be used in butcheries, meat processing factories, main kitchens and other food processing factories.
Toidutöötlemismasinad. Lõikamismasinad. Ohutus- ja hügieeninõuded
Hind 208,00Identne EN 13885:2005
Keel en
49
KAVANDITE ARVAMUSKÜSITLUS
prEN 15284
This European Standard specifies a method for the determination of the resistance to microwave heating of cookware made of ceramic, glass, glass-ceramic or plastics.
Materials and articles in contact with food stuffs - Test method for the resistance of ceramic, glass, glass-ceramic or plastic cookware to microwave heating
Identne prEN 15284:2005
Keel en
Tähtaeg 20.09.2005
prEN ISO 734-1 rev
This part of ISO 734 specifies a method for the determination of the hexane extract (or light-petroleum extract), called "oil content", of meals (excluding compounded products) obtained by the extraction of oil from oilseeds by pressure or solvent.
Oilseed meals - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum)
Identne prEN ISO 734-1:2005ja identne ISO/DIS 734-1:2005
Keel enAsendab EVS-EN ISO 734-1:2001
Tähtaeg 19.09.2005
prEN ISO 5943
This International Standard specifies a potentiometric titration method for the determination of the chloride content of cheese and processed cheese products.
Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method
Identne prEN ISO 5943:2005ja identne ISO 5943:2004
Keel en
Tähtaeg 19.09.2005
prEN ISO 16634
This International Standard specifies a method for the determination of the total nitrogen content and the calculation of crude protein content of cereals, pulses, milled cereal products, oilseeds and animal feeding stuffs.
Cereals, pulses, milled cereal products, oilseeds and animal feeding stuffs -- Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content
Identne prEN ISO 16634:2005ja identne ISO/FDIS 16634:2005
Keel en
Tähtaeg 27.09.2005
71 KEEMILINE TEHNOLOOGIAUUED STANDARDID
CEN/TR 15119:2005
This Technical Report specifies two laboratory methods for obtaining water samples: one from preservative treated wood exposed out of ground contact (wood held in the storage yard after treatment and Use Class 3) and the other from treated wood which has been in continuous contact with ground or water (Use Class 4 or 5), at increasing time intervals after exposure.
Durability of wood and wood-based products - Estimation of emissions from preservative treated wood to the environment - Wood held in the torage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground), and wooden ommodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method
Hind 132,00Identne CEN/TR 15119:2005
Keel enEVS-EN 1019:2005
This European Standard is applicable to sulfur dioxide used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding test methods for sulfur dioxide. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use (see annex B).
Inimtarbevee töötlemiseks kasutatavad kemikaalid. Vääveldioksiid
Hind 113,00Identne EN 1019:2005
Keel enAsendab EVS-EN 1019:2000EVS-EN 12122:2005
This European Standard is applicable to ammonia solution used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonia solution and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to safe handling and use of ammonia solution (see Annex B).
Chemicals used for treatment of water intended for human consumption - Ammonium solution
Hind 141,00Identne EN 12122
Keel enAsendab EVS-EN 12122:2001
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 12122:2001
This European Standard is applicable to ammonia solution used for treatment of water intended for human consumption. It describes the characteristics of ammonia solution and specifies the requirements and the corresponding test methods for ammonia solution. It gives information on its use in water treatment.
Chemicals used for treatment of water intended for human consumption - Ammonium solution
Identne EN 12122:1998
Keel enAsendatud EVS-EN 12122:2005
50
KAVANDITE ARVAMUSKÜSITLUS
EN 61010-2-040
This International Standard specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4.
Ohutusnõuded mõõtmise, kontrolli ja laborikasutuse elektriseadmestikule. Osa 2- 041: Erinõuded meditsiinimaterjalide töötlemiseks auru kasutavatele autoklaavidele ja laboriprotsessidele
Identne EN 61010-2-040:2005ja identne IEC 61010-2-040:2005
Keel enAsendab EVS-EN 61010-2-041:2001; EVS-EN 61010-2-042:2001; EVS-EN 61010-2-043:2001; EVS-EN 61010-2-045:2002
Tähtaeg 9.09.2005
75 NAFTA JA NAFTATEHNOLOOGIAUUED STANDARDID
CEN/TS 14918:2005
This document specifies a method for the determination of the gross calorific value of a solid biofuel at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid.
Solid Biofuels - Method for the determination of calorific value
Hind 246,00Identne CEN/TS 14918:2005
Keel enEVS-EN ISO 6974-6:2005
This part of ISO 6974 describes a gas chromatographic method for the quantitative determination of the content of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons in natural gas samples using three capillary columns.
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
Hind 123,00Identne EN ISO 6974-6:2005ja identne ISO 6974-6:2002
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 15268
This document applies to submersible pump assemblies for use with dispensers installed at petrol filling stations and used to dispense liquid fuels into tanks of motor vehicles, boats and portable containers, and intended for use and storage at ambient temperatures between –20 °C and +40 °C.
Petrol Filling Stations - Safety requirements for the construction and performance of submersible pump assemblies
Identne prEN 15268:2005
Keel en
Tähtaeg 29.08.2005
prEN ISO 5163 rev
This International Standard establishes the rating of liquid spark-ignition engine fuel in terms of an arbitrary scale of octane numbers using a standard single-cylinder, four-stroke cycle, variable-compression ratio, carburetted, CFR engine operated at constant speed.
Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
Identne prEN ISO 5163:2005ja identne ISO 5163:2005
Keel enAsendab EVS-EN 25163:2000
Tähtaeg 12.09.2005
prEN ISO 5164 rev
Käesolev standard hõlmab detonatsioonikarakteristikute määranguid autobensiinidele, mis on ettenähtud kasutamiseks sädesüütega mootorites, väljendatuna ASTM-IP-terminites uurimisoktaaniarvudena.
Autokütused. Detonatsioonikarakteristikute määramine. Uurimismeetod
Identne prEN ISO 5164:2005ja identne ISO 5164:2005
Keel enAsendab EVS-EN 25164:2000
Tähtaeg 12.09.2005
prEN ISO 13706 rev
This International Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum and natural gas industries.
Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
Identne prEN ISO 13706:2005ja identne ISO/FDIS 13706:2005
Keel enAsendab EVS-EN ISO 13706:2001
Tähtaeg 19.09.2005
prEN ISO 16070
This International Standard provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gas industries.
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
Identne prEN ISO 16070:2005ja identne ISO/FDIS 16070:2005
Keel enAsendab EVS-EN ISO 16070:2002
Tähtaeg 19.09.2005
51
prEN ISO 16812 rev
This International Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries.
Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
Identne prEN ISO 16812:2005ja identne ISO/DIS 16812:2005
Keel enAsendab EVS-EN ISO 16812:2004
Tähtaeg 19.09.2005
77 METALLURGIAUUED STANDARDID
EVS-EN 10080:2005
This European Standard specifies general requirements and definitions for the performance characteristics of weldable reinforcing steel used for the reinforcement of concrete structures, delivered as finished products in the form of: - bars, coils (rod, wire) and decoiled products, - sheets of factory-made machine-welded fabric, - lattice girders.
Teras betooni tugevdamiseks. Keevitatav sarrusteras. Üldist
Hind 246,00Identne EN 10080:2005
Keel enEVS-EN 10088-1:2005
This European Standard lists the chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resistingsteels, heat resisting steels and creep resisting steels and spectified in the European Standard hiven in Table 1.
Stainless steels - Part 1: List of stainless steels
Hind 199,00Identne EN 10088-1:2005
Keel enAsendab EVS-EN 10088-1:1999EVS-EN 10088-2:2005
This part of EN 10088 specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting steels for general and construction purposes.
Roostevaba teras. Osa 2: Korrosioonikindlate terasplaatide ja ribade tehnilised tingimused üldiseks- ja ehituslikuks kasutamiseks
Hind 208,00Identne EN 10088-2:2005
Keel enAsendab EVS-EN 10088-2:1999
EVS-EN 10088-3:2005
This part of EN 10088 specifies the technical delivery conditions for semi-finished productions, hot or cold formed bars, rods, wire, sections and bright products of standard grades and special grades of corrosion resisting stainless steels for general and construction purposes.
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Hind 233,00Identne EN 10088-3:2005
Keel enAsendab EVS-EN 10088-3:1999EVS-EN 10207:2005
This document specifies the technical delivery requirements for flat products and bars made of steel in accordance with the specifications for pressurized parts in simple pressure vessels as defined in the Directive 87/404/EEC (see Annex A) and standardized in EN 286-1 to -3.
Terased lihtsate surveanumate valmistamiseks. Plaatide, ribade ja lattide tehnilised tarnenõuded
Hind 132,00Identne EN 10207:2005
Keel enAsendab EVS-EN 10207:1999EVS-ISO 4967:2005
This International Standard specifies a micrographic method of determining the nonmetallic inclusions in rolled or forged steel products having a reduction ratio of at least 3 using standard diagrams. This method is widely used to assess the suitability of a steel for a given use. However, since it is difficult to achieve reproducible results owing to the influence of the test operator, even with a large number of specimens, precautions should be taken when using the method.
Steel — Determination of content of nonmetallic inclusions — Micrographic method using standard diagrams
Hind 208,00ja identne ISO 4967:1998
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 10088-2:1999
See EN 10088 standardi osa määrab kindlaks üldotstarbeliste roostevabade teraste standardmarkidest ja spetsiaalmarkidest toodetud kuum- või külmvaltsitud lehtede või plaatide ja ribade tehnilised tarnetingimused.
Roostevabad terased. Osa 2: Üldotstarbeliste lehtede või plaatide ja ribade tehnilised tarnetingimused
Identne EN 10088-2:1995
Keel enAsendatud EVS-EN 10088-2:2005
52
EVS-EN 10088-3:1999
See EN 10088 standardi osa määrab kindlaks üldotstarbeliste roostevabade teraste standardmarkidest ja spetsiaalmarkidest toodetud pooltoodete, kuum- või külmsurvetöötlusel toodetud lattide, varraste ja profiilide tehnilised tarnetingimused.
Roostevabad terased. Osa 3: Üldotstarbeliste pooltoodete, lattide, varraste ja profiilide tehnilised tarnetingimused
Identne EN 10088-3:1995
Keel enAsendatud EVS-EN 10088-3:2005EVS-EN 10088-1:1999
See Euroopa standard esitab roostevabade teraste keemilise koostise ja teatmeandmeid mõne füüsikalise omaduse kohta.
Roostevabad terased. Osa 1: Roostevabade teraste loetelu
Identne EN 10088-1:1995
Keel enAsendatud EVS-EN 10088-1:2005EVS-EN 10207:1999
Standard kehtestati selleks, et määrata kindlaks täielikud tehnilised tarnetingimused terasest tasapinnaliste toodete ja lattide kohta, mis peavad vastama lihtsate survemahutite surve all olevate komponentide tehnilistele nõuetele, nagu on kindlaks määratud direktiivis 87/404/EEC ja on standardiseeritud standardis EN 286.
Terased lihtsate surveanumate valmistamiseks. Plaatide, ribade ja lattide tehnilised tarnenõuded
Identne EN 10207:1991+A1:1997
Keel enAsendatud EVS-EN 10207:2005
KAVANDITE ARVAMUSKÜSITLUS
prEN 10292 rev
This document specifies requirements for continuously hot-dip zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ) and aluminium-silicon alloy (AS) coated flat products made of steels with higher yield strength for cold forming (see Tables 1 and 3) with thicknesses up to and including 3,0 mm unless otherwise agreed. The thickness is the final thickness of the delivered product after coating.
Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions
Identne prEN 10292:2005
Keel enAsendab EVS-EN 10292:2000
Tähtaeg 16.09.2005
prEN 15266
This European standard specifies the requirements for material, design, manufacture, testing, marking and documentation of stainless steel pliable corrugated gas tubing design systems for buildings and for maximum operating pressure ≤ 0,5 bar, with a nominal size range from DN 10 to DN 50.
Stainless steel pliable corrugated tubing systems in buildings for gas with an operating pressure up to 0,5 bar
Identne prEN 15266:2005
Keel n
Tähtaeg 29.08.2005
prEN ISO 9445
This International Standard specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip.
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form
Identne prEN ISO 9445:2005ja identne ISO 9445:2002
Keel en
Tähtaeg 19.09.2005
79 PUIDUTEHNOLOOGIAUUED STANDARDID
CEN/TS 14966:2005
This Technical Specification specifies small-scale test methods for estimating the following mechanical properties of wood-based panels: - indicative planar shear strength (sometimes referred to as block shear); - indicative panel shear strength; - indicative strength and modulus of elasticity in tension in the plane of the panel; - indicative strength in compression in the plane of the panel.
Wood-based panels - Small scale indicative test methods for certain mechanical properties
Hind 113,00Identne CEN/TS 14966:2005
Keel enEVS-EN 14342:2005
This document defines and specifies for wood and parquet flooring the relevant characteristics and the appropriate test methods to determine these characteristics for internal use as flooring. It also applies to wood veneer floor coverings.
Puitpõrandad. Omadused, vastavushindamine ja märgistus
Hind 162,00Identne EN 14342:2005
Keel en
81 KLAASI- JA KERAAMIKA-TÖÖSTUSUUED STANDARDID
EVS-EN 843-3:2005
This European Standard specifies a method for the determination of subcritical crack growth parameters of advanced monolithic technical ceramics in the temperature range 15 °C to 30 °C by measuring the dependence of mean fracture strength on the rate of loading.
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
Hind 113,00Identne EN 843-3:2005
Keel en
53
EVS-EN 843-4:2005
This part of EN 843 defines conditions for conducting, and provides guidelines concerning the value that may be ascribed to the results of, standard hardness tests when applied to advanced monolithic technical ceramics.
Advanced technical ceramics - Monolithic ceramics. Mechanical properties at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness
Hind 151,00Identne EN 843-4:2005
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 725-8 rev
See standardi EN 725 osa kirjeldab keraamiliste pulbermaterjalide tihendatud puistetiheduse määramise meetodit.
Spetsiaalne tehniline keraamika. Keraamiliste pulbermaterjalide katsemeetodid. Osa 8: Tihendatud puistetiheduse määramine
Identne prEN 725-8:2005
Keel enAsendab EVS-EN 725-8:2000
Tähtaeg 23.09.2005
prEN 725-9 rev
See standardi EN 725 osa kirjeldab keraamiliste pulbermaterjalide tihendamata puistetiheduse määramise meetodit.
Spetsiaalne tehniline keraamika. Keraamiliste pulbermaterjalide katsemeetodid. Osa 9: Tihendamata puistetiheduse määramine
Identne prEN 725-9:2005
Keel enAsendab EVS-EN 725-9:2000
Tähtaeg 23.09.2005
83 KUMMI- JA PLASTITÖÖSTUSUUED STANDARDID
CEN/TR 15123:2005
This document concerns the design, preparation and application of plaster with polymer as the principal binder type, for internal plastering on all types of background used under normal conditions.
Design, preparation and application of internal polymer plastering systems
Hind 113,00Identne CEN/TR 15123:2005
Keel enEVS-EN 14510:2005
This European Standard specifies a method for determining the sole positioning tack at bonding of an apparently dry adhesive film, usually after heat reactivation.
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack)
Hind 104,00Identne EN 14510:2005
Keel en
EVS-EN ISO 1133:2005
This International Standard specifies two procedures for the determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastic materials under specified conditions of temperature and load.
Plastid. Termoplastide sulandi massvooluhulga ja mahtvooluhulga määramine
Hind 151,00Identne EN ISO 1133:2005ja identne ISO 1133:2005
Keel enAsendab EVS-EN 1133:2000
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN ISO 1133:2000
This standard specifies a method for the determination of the metl mass-flow frate (MFR) and the melt volume-flow rate (MVR) of thermoplastic materials under specified conditions of temperature and load. Normally, the test conditions for measurement of melt flow rate are specified in the material standard with a reference to this standard. The test conditions normally used for thermoplastics are listed in annexes A and B. The metl volume-flow rate will normally be found useful when comparing filled and unfilled thermoplastics. The melt flow rate con now be determined by automatic measurement provided the melt density at the test temperature is known.
Plastid. Termoplastide sulandi massvooluhulga ja mahtvooluhulga määramine
Identne EN ISO 1133:1999ja identne ISO 1133:1997
Keel enAsendatud EVS-EN ISO 1133:2005
KAVANDITE ARVAMUSKÜSITLUS
prEN 15274
This European Standard specifies requirements for adhesives intended for use in the creation and general assembly of load-bearing, structural elements used in civil engineering works and the construction of buildings.
General purpose adhesives for structural assembly. Requirements and test methods
Identne prEN 15274:2005
Keel en
Tähtaeg 16.09.2005
prEN 15275
This European Standard specifies requirements and test methods for the characterisation of anaerobic adhesives intended for the general assembly of co-axial metallic elements in building and civil engineering structures including fasteners- threaded and otherwise, pipes and tubes.
Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
Identne prEN 15275:2005
Keel en
Tähtaeg 16.09.2005
54
85 PABERITEHNOLOOGIAUUED STANDARDID
EVS-EN 1010-5:2005
This standard applies to machines for the production of corrugated board and the conversion of flat and corrugated board: - corrugated board production machines; - folder gluer machines; - printer slotters, rotary die cutters and combined machines (inline machines); - hand-fed platen machines for cutting and creasing; - automatic platen machines for cutting and creasing; - tube winding machines.
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
Hind 233,00Identne EN 1010-5:2005
Keel enEVS-EN 1034-7:2005
This European Standard applies to chests used in paper making and shall be applied together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to chests when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
Masinate ohutus. Ohutusnõuded paberivalmistamis- ja viimistlusmasinate kavandamisele ja valmistamisele. Osa 7: Basseinid
Hind 104,00Identne EN 1034-7:2005
Keel enEVS-EN 1034-22:2005
This European Standard applies to wood grinders intended for the production of pulp used in paper making including sharpening devices and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to wood grinders when used as intended and under the conditions foreseen by the manufacturer (see clause 4).
Masinate ohutus. Ohutusnõuded paberivalmistamis- ja viimistlusmasinate kavandamisele ja valmistamisele. Osa 22: Puiduhakkurid
Hind 113,00Identne EN 1034-22:2005
Keel en
87 VÄRVIDE JA VÄRVAINETE TÖÖSTUSUUED STANDARDID
EVS-EN 12878:2005
This European Standard specifies the requirements and the methods of test for pigments for use in the colouring of building materials based on cement and cement/lime combinations. Pigments covered by this European Standard may also be used in pure lime mortar. For this application see EN 459-1 and EN 459-2.
Pigmendid tsemendil ja/või lubjal põhinevate ehitusmaterjalide värvimiseks. Spetsifikatsioon ja katsemeetodid
Hind 171,00Identne EN 12878:2005
Keel enAsendab EVS-EN 12878:2000
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 12878:2000
Käesolev Euroopa standard määratleb nõuded (vt punkt 4) ja meetodid pigmentide jaoks, mida kasutatakse tsemendil ja/või lubjal põhinevate ehitusmaterjalide värvimiseks. Sel otstarbel kasutatavad pigmendid võivad olla lihtsad pigmendid, pigmentide segud või pigmentide ja täiteainete segud pulbrilistena, granuleeritutena või vesilahustena.
Pigmendid tsemendil ja/või lubjal põhinevate ehitusmaterjalide värvimiseks. Spetsifikatsioon ja katsemeetodid
Identne EN 12878:1999
Keel enAsendatud EVS-EN 12878:2005
91 EHITUSMATERJALID JA EHITUSUUED STANDARDID
CEN/TR 15123:2005
This document concerns the design, preparation and application of plaster with polymer as the principal binder type, for internal plastering on all types of background used under normal conditions.
Design, preparation and application of internal polymer plastering systems
Hind 113,00Identne CEN/TR 15123:2005
Keel enCEN/TR 15124:2005
This document concerns the design, preparation and application of plaster based on gypsum, for internal plastering on all types of background used under normal conditions.
Design, preparation and application of internal gypsum plastering systems
Hind 141,00Identne CEN/TR 15124:2005
Keel en
55
CEN/TR 15125:2005
This document concerns the design, preparation and application of internal plaster and plastering systems based on cement and/or lime for internal plastering on all types of background used under normal conditions.
Design, preparation and application of internal cement and/or lime plastering systems
Hind 190,00Identne CEN/TR 15125:2005
Keel enEVS 812-5:2005
Standard sätestab ehituslikud tuleohutusnõuded põlevvedelike käitlemisega tegelevatele tanklatele ja terminalidele (VI kasutusviis), ning vastava tegevusega muude hoonete ja rajatiste piisavalt ohutuks projekteerimiseks ja ehitamiseks.
Ehitiste tuleohutus. Osa 5: Kütuseterminalide ja tanklate tuleohutus
Hind 162,00ja identne EVS 812-5
Keel etEVS-EN 81-73:2005
This European Standard specifies the special provisions and safety rules to ensure the behaviour of lifts in the event of fire in a building, on the basis of a signal(s) from the fire alarm detection system to the lift(s) control system.
Liftide valmistamise ja paigaldamise ohutuseeskirjad. Reisijate ja kaupade veoks mõeldud liftide eriotstarbelised rakendused. Osa 73: Liftide käitumine tulekahju korral
Hind 123,00Identne EN 81-73:2005
Keel enEVS-EN 413-2:2005
This European Standard describes reference and alternative test methods to be used when testing masonry cements to assess their conformity to EN 413-1. It gives the tests on fresh mortar for consistence, water retention and air content.
Masonry cement - Part 2: Test methods
Hind 132,00Identne EN 413-2:2005
Keel enAsendab EVS-EN 413-2:1999EVS-EN 1555-3:2002/A1:2005
This part of prEN 1555 specifies the characteristics of fusion fittings made from polyethylene (PE) as well as of mechanical fittings made from PE and other materials for piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this standard
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
Hind 62,00Identne EN 1555-3:2002/A1:2005
Keel en
EVS-EN 1991-1-6:2005
EN 1991-1-6 provides principles and general rules for the determination of actions which should be taken into account during the execution of buildings and civil engineering works.
Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
Hind 171,00Identne EN 1991-1-6:2005
Keel enEVS-EN 1996-1-2:2005
This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
Hind 286,00Identne EN 1996-1-2: 2005
Keel enEVS-EN 12878:2005
This European Standard specifies the requirements and the methods of test for pigments for use in the colouring of building materials based on cement and cement/lime combinations. Pigments covered by this European Standard may also be used in pure lime mortar. For this application see EN 459-1 and EN 459-2.
Pigmendid tsemendil ja/või lubjal põhinevate ehitusmaterjalide värvimiseks. Spetsifikatsioon ja katsemeetodid
Hind 171,00Identne EN 12878:2005
Keel enAsendab EVS-EN 12878:2000EVS-EN 13063-2:2005
This European Standard specifies the requirements and test methods for multiwall system chimneys working under wet conditions (in the following expressed as “wet chimney”) with pressure type N1, N2 or P1 according to EN 1443 and a working temperature below or equal T600 according to prEN 13063-1, in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this document.
Korstnad. Savi/keraamiliste lõõrivoodritega korstnasüsteemid. Osa 2: Nõuded ja katsemeetodid märgades töötingimustes rakendamiseks
Hind 199,00Identne EN 13063-2:2005
Keel enEVS-EN 13172:2002/A1:2005
This European Standard makes some corrections and clarifications as well as a rearrangement of some of its clauses as follows: product: item or good produced under conditions which are presumed uniform to a given specification and placed on the market
Thermal isulating products - Evaluation of conformity
Hind 84,00Identne EN 13172:2001/A1:2005
Keel en
56
EVS-EN 13748-1:2004/A1:2005
This European Standard specifies materials, properties and methods of testing for unreinforced cement-bound terrazzo tiles which are factory made and sold ready to be placed. The tiles are intended for internal use.
Terratsoplaadid. Osa 1: Siseruumides kasutamiseks mõeldud terratsoplaadid
Hind 73,00Identne EN 13748-1:2004/A1:2005
Keel enEVS-EN 13808:2005
This European standard specifies the requirements for performance characteristics of cationic bituminous emulsion classes which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
Bituumen ja bituumenid sisaldavad sideained. Katioonsete bituumenemulsioonide määratlemise raamistik
Hind 162,00Identne EN 13808:2005
Keel enEVS-EN 13963:2005
The document specifies the requirements of jointing compounds and paper tapes for use with gypsum plasterboard complying with EN 520, products from secondary processing of this board and gypsum boards with fibrous reinforcement.
Kipsplaatide ühendusmaterjalid. Definitsioonid, nõuded ja katsemeetodid
Hind 180,00Identne EN 13963:2005
Keel enEVS-EN 14190:2005
This European Standard specifies the characteristics and performance of products which have been produced from gypsum plasterboards manufactured according to EN 520 by reprocessing.
Lisatöötlusel saadavad kipsplaadist tooted. Määratlused, nõuded ja katsemeetodid
Hind 171,00Identne EN 14190:2005
Keel enEVS-EN 14296:2005
This European Standard specifies requirements for the cleanability, load resistance and durability of communal washing troughs used for domestic purposes.
Sanitaarseadmed. Üldkasutatavad pesukünad
Hind 132,00Identne EN 14296:2005
Keel enEVS-EN 14488-1:2005
This standard specifies a method for obtaining samples of fresh or hardened (i.e. before or after set) sprayed mortar/concrete, depending on the property to be measured and its associated test method
Testing sprayed concrete - Sampling fresh and hardened concrete
Hind 84,00Identne EN 14488-1:2005
Keel en
EVS-EN 14488-4:2005
This European Standard describes a means of determining the tensile bond between sprayed concrete and substrate of concrete or rock tested in a laboratory as a direct tension test. Bond strength is defined as the capacity to transfer tension between two layers.
Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
Hind 84,00Identne EN 14488-4:2005
Keel enEVS-EN 14518:2005
This European Standard specifies test conditions and methods for the determination of the cooling capacity of chilled beams or other similar systems with free convection, i.e. without forced air flow. Also included is the method to determine local air velocity and temperature below the beam.
Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams
Hind 113,00Identne EN 14518:2005
Keel enEVS-EN 14691:2005
This European Standard specifies a test method for the evaluation of the compatibility of the waterproofing system applied to a concrete surface and covered with an asphalt layer. The complete system is exposed to an accelerated heat conditioning followed by a determination of the shear strength properties before and after heat conditioning.
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of compatibility by heat ageing
Hind 73,00Identne EN 14691:2005
Keel enEVS-EN 14692:2005
This European Standard specifies a test method for the evaluation of the resistance of a waterproofing system to compaction of an asphalt layer
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer
Hind 95,00Identne EN 14692:2005
Keel enEVS-EN 14694:2005
This European Standard specifies a test method for the evaluation of the resistance to impact puncturing of a sheet or sheet system
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment
Hind 104,00Identne EN 14694:2005
Keel en
57
EVS-HD 60364-7-703:2005
he particular requirements of this part of IEC 60364 apply to: - sauna cabins erected on site, e.g. in a location or in a room; - the room where the sauna heater is, or the sauna heating appliances are installed. In this case the whole room is considered as the sauna.
Electrical installations of buildings; part 7: requirements for special installations or locations; section 703: locations containing sauna heaters
Hind 104,00Identne HD 60364-7-703:2005ja identne IEC 60364-7-703:2004
Keel enAsendab EVS-HD 384.7.703 S1:2003
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS 812-2:2002
Käesolev standard sätestab tuleohutusnõuded ehitiste ventilatsiooni- ja siutsueemaldussüsteemide projekteerimisele, ehitamisele ja ekspluatatsioonile.
Ehitiste tuleohutus. Osa 2: Ventilatsioonisüsteemid ja suitsueemaldus
ja identne EVS 812-2:2002
Keel etAsendatud EVS 812-2:2005EVS-EN 413-2:1999
See standard kirjeldab etalon- ja alternatiivmeetodeid, mida kasutatakse müüritsemendi teimimiseks, et hinnata selle vastavust standardile ENV 413-1. Standard esitab teimid värske mördisegu konsistentsi, veesiduvuse, õhusisalduse ja töödeldavuse määramiseks. Erimeelsuste korral kasutatakse ainult etalonmeetodeid.
Müüritsement. Osa 2: TeimimeetodidIdentne EN 413-2:1994
Keel enAsendatud EVS-EN 413-2:2005EVS-EN 1059:2000
This European Standard specifies requirements for trusses assembled using punched metal plate fasteners.
Timber structures - Production requirements for prefabricated trusses using punched metal plate fasteners
Identne EN 1059:1999
Keel enAsendatud EVS-EN 14250:2005EVS-EN 12878:2000
Käesolev Euroopa standard määratleb nõuded (vt punkt 4) ja meetodid pigmentide jaoks, mida kasutatakse tsemendil ja/või lubjal põhinevate ehitusmaterjalide värvimiseks. Sel otstarbel kasutatavad pigmendid võivad olla lihtsad pigmendid, pigmentide segud või pigmentide ja täiteainete segud pulbrilistena, granuleeritutena või vesilahustena.
Pigmendid tsemendil ja/või lubjal põhinevate ehitusmaterjalide värvimiseks. Spetsifikatsioon ja katsemeetodid
Identne EN 12878:1999
Keel enAsendatud EVS-EN 12878:2005
KAVANDITE ARVAMUSKÜSITLUS
HD 384.7.754 S1
The particular requirements of this section apply to the internal electrical installations of caravans and motor-caravans for rated voltage not exceeding 440 V.
Electrical installations of buildings Part 7: Requirements for special installations or locations Section 754: Electrical installations in caravans and motor-caravans
Identne HD 384.7.754 S1:2005ja identne IEC 60364-7-708:1988 + A1:1993
Keel enAsendab EVS-HD 384.7.708 S1:2003
Tähtaeg 10.09.2005
prEN 13126-8 rev
This European Standard specifies the requirements and test procedures for durability, strength, security and function of Tilt&Turn, Tilt-First and Turn-Only hardware components or sets for windows and balcony doors in accordance with common application as shown in Annex A of prEN 13126-1. For other applications refer to EN 12519.
Building hardware, fittings for windows and door height windows - Requirements and test procedures - Part 8: Tilt & turn, Tilt-First and Turn-Only hardware
Identne prEN 13126-8:2005
Keel enAsendab CEN/TS 13126-8:2004
Tähtaeg 16.09.2005
prEN 13126-1 rev
This European Standard specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and balcony doors including requirements and test methods common to all hardware.
Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 1: Requirements common to all types of hardware
Identne prEN 13126-1:2005
Keel enAsendab CEN/TS 13126-1:2004
Tähtaeg 16.09.2005
prEN 13200-3
This European Standard specifies design requirements for layout and product characteristics for separating elements within spectator accommodation at permanent or temporary entertainment venues including sport stadia, sport halls, indoor and outdoor facilities for the purpose of enabling their functionality.
Spectator facilities - Part 3: Separating elements - Requirements
Identne prEN 13200-3:2005
Keel en
Tähtaeg 27.09.2005
58
prEN 14055
This European Standard specifies design, performance requirements and the test methods for WC flushing cisterns with flushing mechanism, inlet valve and overflow.
WC flushing cisterns
Identne prEN 14055:2005
Keel en
Tähtaeg 23.09.2005
prEN 15283-1
This European Standard specifies the characteristics and performance of gypsum boards with mat reinforcement intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
Identne prEN 15283-1:2005
Keel en
Tähtaeg 20.09.2005
prEN 15283-2
Part 2 of this European Standard specifies the characteristics and performance of gypsum fibre boards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
Identne prEN 15283-2:2005
Keel en
Tähtaeg 20.09.2005
prEN 15287-1
This European Standard describes the method of specifying the design and installation criteria for system chimneys, custom built chimneys, and for relining existing chimneys. It also gives information on commissioning of an installed chimney.
Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances
Identne prEN 15287-1:2005
Keel en
Tähtaeg 20.09.2005
93 RAJATISEDUUED STANDARDID
CEN/TR 15128:2005
This document gives a survey of European Standards available in the field of rehabilitation of drain and sewer systems.
Survey of European Standards for rehabilitation of drain and sewer systems
Hind 113,00Identne CEN/TR 15128:2005
Keel en
EVS-EN 1433:2003/A1:2005
This European Standard specifies requirements for linear drainage channels for the collection and conveyance of surface water when installed within areas subjected to pedestrian and/or vehicular traffic
Sõidukite ja jalakäijate alade kuivenduskanalid . Klassifikatsioon, kavandamise ja katsetamise nõuded, märgistus ja vastavushindamine
Hind 233,00Identne EN 1433:2002/A1:2005
Keel enEVS-EN 12274-7:2005
This document specifies a test method for determining the suitability of aggregates and cationic emulsions for slurry surfacings and, where appropriate, the effect of individual additives.
Slurry surfacing - Part 7: Shaking abrasion test
Hind 123,00Identne EN 12274-7:2005
Keel enEVS-EN 12697-41:2005
This European Standard specifies a test method to determine the resistance of bituminous materials to deicing fluids such as solutions of acetate and formate. The procedure determines the surface tensile strength of a specimen of asphalt after storage in de-icing fluid.
Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
Hind 113,00Identne EN 12697-41:2005
Keel enEVS-EN 12697-43:2005
This European Standard specifies a test method to determine the resistance of a bituminous mixture or pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored from a pavement in a fuel, followed by a brushing period with a steel brush mounted in a mixer.
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Hind 113,00Identne EN 12697-43:2005
Keel enEVS-EN 13808:2005
This European standard specifies the requirements for performance characteristics of cationic bituminous emulsion classes which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
Bituumen ja bituumenid sisaldavad sideained. Katioonsete bituumenemulsioonide määratlemise raamistik
Hind 162,00Identne EN 13808:2005
Keel en
59
KAVANDITE ARVAMUSKÜSITLUS
prEN 12697-1 rev
This document describes test methods for the determination of the soluble binder content of samples of bituminous mixtures.
Bituminous mixtures - Test methods for not mix asphalt - Part 1: Soluble binder content
Identne prEN 12697-1:2005
Keel enAsendab EVS-EN 12697-1:2001
Tähtaeg 23.09.2005
prEN ISO 22476-4
This document deals with field testing using Ménard pressermeter test as part of geotechnical investigation and testing according to EN 1997-1 and EN 1997-2.
Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test
Identne prEN ISO 22476-4:2005ja identne ISO/DIS 22476-4:2005
Keel en
Tähtaeg 19.09.2005
prEN ISO 22476-5
This document deals with field testing with borehole jack test as part of geotechnical investigation and testing according to EN 1997-1 and EN 1997-2.
Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test
Identne prEN ISO 22476-5:2005ja identne ISO/DIS 22476-5:2005
Keel en
Tähtaeg 19.09.2005
prEN ISO 22476-7
This document deals with field testing with borehole jack test as part of geotechnical investigation and testing according to EN 1997-1 and EN 1997-2.
Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test
Identne prEN ISO 22476-7:2005ja identne ISO/DIS 22476-7:2005
Keel en
Tähtaeg 19.09.2005
97 OLME. MEELELAHUTUS. SPORTUUED STANDARDID
EVS-EN 30-1-1:1999/A3:2005
See standard kehtestab konstruktsiooni- ja käituskarakteristikud ning nõuded ja katsemeetodid selliste eraldipaiknevate ja sisseehitatud koduste toiduvalmistusseadmete ohutuse ja märgistamise kohta, mis põletavad osas 4.1 esitatud põlevgaase vastavalt osas 4.2 esitatud kategooriatele ja mis tekstis on nimetatud kui seadmed.
Kodused gaaskuumutusega toiduvalmistusseadmed. Osa 1-1: Ohutus. Üldist
Hind 62,00Identne EN 30-1-1:1998/A3:2005
Keel en
EVS-EN 1273:2005
This European Standard specifies safety requirements and test methods for baby walking frames into which a child is placed, and intended to be used from when the child is able to sit up by itself until the child is able to walk by itself.
Child use and care articles - Baby walking frames - Safety requirements and test methods
Hind 151,00Identne EN 1273:2005
Keel enAsendab EVS-EN 1273:2001EVS-EN 12778:2003/A1:2005
This European Standard defines terms, establishes manufacturing, safety and functional requirements and corresponding tests and specifies data for marking, labelling and instructions for use, for pressure cookers.This standard is applicable to portable pressure cookers for domestic use, with gross volume up to 25 I, with working pressure over 4 kPa and less than 150 kPa, with either integrated or independent heating
Toiduvalmistamise seadmed. Kiirkeetjad koduseks kasutamiseks
Hind 171,00Identne EN 12778:2002/A1:2005
Keel enEVS-EN 12875-1:2005
This European Standard specifies a method for testing the resistance of domestic articles made from ceramic, glass, glass ceramic, vitreous enamel, metal and plastics under the combined chemical, thermal and mechanical stresses of mechanical dishwashing in domestic dishwashers.
Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles
Hind 104,00Identne EN 12875-1:2005
Keel enEVS-EN 14225-4:2005
This European Standard specifies the human factors performance of one atmosphere diving suits (ADS) where the diver can make use of articulated arms and legs and is able to conduct underwater activities while breathing underwater. Marking, labelling, information to be provided at the point of sale, and instructions for use are also specified.
Tuukriülikonnad. Osa 4: Üheatmosfäärilised ülikonnad (ADS). Nõuded inimtegurile ja katsemeetodid
Hind 123,00Identne EN 14225-4:2005
Keel enEVS-EN 14543:2005
This European standard specifies the design, safety and marking requirements and test methods for flueless patio heaters for outdoor or amply ventilated area use only.
Vedelgaasiseadmete tehniline kirjeldus. Rõdude küttekehad. Lõõrita soojust kiirgavad küttekehad kasutamiseks välistingimustes või piisava ventilatsiooniga ruumides
Hind 199,00Identne EN 14543:2005
Keel en
60
EVS-EN 50428:2005
This collateral standard applies to HBES switches with a working voltage not exceeding 250 V a.c. and a rated current up to and including 16 A. for household and similar fixed electrical installations either indoors or outdoors and to associated electronic extension units.
Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and building electronic systems (HBES)
Hind 171,00Identne EN 50428:2005
Keel enEVS-EN 60335-2-61:2003/A1:2005
Deals with the safety of electric thermal-storage room heaters intended to heat the room in which they are located, their rated voltage being not more than 250 V for single phase and 480 V for other appliances.
Majapidamismasinad ja nende sarnased elektriseadmed. Ohutus. Osa 2-61: Erinõuded termilistele laoruumi küttekehadele
Hind 73,00Identne EN 60335-2-61:2003/A1:2005ja identne IEC 60335-2-61:2002/A1:2005
Keel enEVS-EN 60335-2-25:2003/A1:2005
Deals with the safety of microwave ovens for household use. The rated voltage is less than 250 V. It also deals with combination microwave ovens. For commercial microvave ovens, see IEC 60335-2-90
Majapidamismasinad ja nende sarnased elektriseadmed. Ohutus. Osa 2-25: Erinõuded mikrolaineahjudele
Hind 73,00Identne EN 60335-2-25:2002/A1:2005ja identne IEC 60335-2-25:2002/A1:2005
Keel enEVS-EN 61121:2005
This standard is applicable to household electric tumbler dryers of the automatic and non-automatic type, with or without cold water supply and incorporating a heating device. States and defines the principal performance characteristics of household electric tumbler dryers of interest to the users and describe the standard methods for measuring these characteristics.
Tumble dryers for household use - Methods for measuring the performance
Hind 162,00Identne EN 61121:2005ja identne IEC 61121:2002
Keel enAsendab EVS-EN 61121:2001/A11:2002; EVS-EN 61121:2001
EVS-ISO 9239-2:2005
This part of ISO 9239 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover). This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results. This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
Hind 171,00ja identne ISO 9239-2:2002
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 61121:2001
This standard is applicable to household electric tumbler dryers of the automatic and non-automatic type, with or without cold water supply and incorporating a heating device. States and defines the principal performance characteristics of household electric tumbler dryers of interest to the users and describe the standard methods for measuring these characteristics.
Kodumajapidamises kasutatavad trummelkuivatid. Toimimisnäitajate mõõtemeetodid
Identne EN 61121:1999ja identne IEC 61121:1997
Keel enAsendatud EVS-EN 61121:2005EVS-EN 61121:2001/A11:2002
This standard is applicable to household electric tumbler dryers of the automatic and non-automatic type, with or without cold water supply and incorporating a heating device. States and defines the principal performance characteristics of household electric tumbler dryers of interest to the users and describe the standard methods for measuring these characteristics.
Kodumajapidamises kasutatavad trummelkuivatid. Toimimisnäitajate mõõtemeetodid
Identne EN 61121:1999/A11:2000
Keel enAsendatud EVS-EN 61121:2005
61
KAVANDITE ARVAMUSKÜSITLUS
EN 71-8:2003/prA2
This part of EN 71 specifies requirements and test methods for activity toys for domestic family use attached to or incorporating a crossbeam, and similar toys intended for children under 14 years of age to play on or in and to bear the mass of one or more children. The scope excludes equipment intended for use in schools, kindergartens, public playgrounds, restaurants, shopping centres and similar public places dealt with in EN 1176 parts 1 to 6
Mänguasjade ohutus. Osa 8: Kiiged, liumäed ja teised perekondlikus sise- ja välistegevuses kasutatavad sarnased mänguvahendid
Identne EN 71-8:2003/prA2:2005
Keel en
Tähtaeg 16.09.2005
HD 384.7.708 S2
The requirements of Part 7 supplement, modify or annul the general requirements of the other parts of IEC 60364. Also supersedes IEC 60585-1 (1977).
Electrical installations of buildings Part 7: Requirements for special installations or locations Section 708: Electrical installations in caravan parks
Identne HD 384.7.708 S2:2005ja identne IEC 60364-7-708:1988 + A1:1993
Keel enAsendab EVS-HD 384.7.708 S1:2003
Tähtaeg 10.09.2005
prEN 71-2 rev
This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
Mänguasjade ohutus - Süttivus
Identne prEN 71-2:2005
Keel enAsendab EVS-EN 71-2:2003
Tähtaeg 23.09.2005
prEN 581-1 rev
Käesolev EN 581 osa esitab kodus, avalikus kohas ja matkal kasutatava kerge ning kokkupandava õuemööbli toolide ja laudade üldised ohutusnõuded. Standard ei käsitle eemaldatavat polsterdust, katteid ega püsivalt kinnitatud mööblit.
Õuemööbel. Kodus, avalikus kohas ja matkal kasutatavad toolid ja lauad. Osa 1: Üldised ohutusnõuded
Identne prEN 581-1:2005
Keel enAsendab EVS-EN 581-1:2000
Tähtaeg 27.09.2005
prEN 1270 rev
Käesolev Euroopa standard määrab kindlaks funktsionaalsed ja ohutusnõuded korvpallivarustusele. Standard on kohaldatav 8 tüüpi korvpallivarustusele. Standard ei käsitle kodust korvpallivarustust, mis on kindlaks määratud normdokumendiga EN 71-1.
Spordiväljakuvarustus. Korvpallivarustus. Funktsionaalsed ja ohutusnõuded, katsemeetodid
Identne prEN 1270:2005
Keel enAsendab EVS-EN 1270:2000
Tähtaeg 16.09.2005
prEN 13200-3
This European Standard specifies design requirements for layout and product characteristics for separating elements within spectator accommodation at permanent or temporary entertainment venues including sport stadia, sport halls, indoor and outdoor facilities for the purpose of enabling their functionality.
Spectator facilities - Part 3: Separating elements - Requirements
Identne prEN 13200-3:2005
Keel en
Tähtaeg 27.09.2005
prEN 15284
This European Standard specifies a method for the determination of the resistance to microwave heating of cookware made of ceramic, glass, glass-ceramic or plastics.
Materials and articles in contact with food stuffs - Test method for the resistance of ceramic, glass, glass-ceramic or plastic cookware to microwave heating
Identne prEN 15284:2005
Keel en
Tähtaeg 20.09.2005
prEN 15288-1
This standard provides safety requirements for the design of public pools. It is intended for those who are concerned with design and operation of public swimming pools. It provides guidance about the risks associated with public swimming pool design, by identifying the design characteristics required for a safe environment.
Swimming pools - Part 1: Safety requirements for design
Identne prEN 15288-1:2005
Keel en
Tähtaeg 20.09.2005
prEN ISO 15502
See standardi EN 28187:1991 muudatus 1 käsitleb spetsiaalkambreid selliste kergesti riknevate toiduainete säilitamiseks, mida originaalstandardis ei käsitletud.
Kodu-külmutusseadmed. Külmikud-sügavkülmutid. Omadused ja katsemeetodid.
Identne prEN ISO 15502:2005ja identne ISO/FDIS 15502:2005
Keel enAsendab EVS-EN 28187:1999; EVS-EN ISO 5155:2000; EVS-EN ISO 7371:2000; EVS-EN ISO 8561:2000
Tähtaeg 12.09.2005
62
STANDARDITE TÕLKED KOMMENTEERIMISEL
Selles jaotises avaldame teavet eesti keelde tõlgitavate Euroopa või rahvusvaheliste standardite kohta. Alates veebruarikuust 2004 ei avaldata teavet arvamusküsitluse jaotises eelpool nimetatud standardite kohta, kuna tegemist on varem jõustumisteate meetodil üle võetud standarditega, mille sisu osas arvamust avaldada ei saa. Standardite tõlgetega on võimalik tutvuda EVS standardiosakonnas ja EVS raamatukogus ning osta EVS müügigrupist [email protected] .
Tõlgete kommenteerimise ja ettepanekute esitamise perioodi lõpp on 01.09.2005.
EVS-EN 12830 Jahutatud, külmutatud, sügavkülmutatud/ kiirkülmetatud toidu ja jäätise temperatuuri registreerimisseadmed transpordil, ladustamisel ja jaotamisel. Katsed, esitus, sobivus Standard määratleb jahutatud, külmutatud ja sügavkülmutatud/kiiresti külmutatud toidu ja jäätise transportimise, ladustamise ja jaotamise vahendites ülesseatud õhutemperatuuri registreerimisseadmete tehnilised ja funktisonaalsed karakteristikud. EVS-EN 50121-1 Raudteealased rakendused. Elektromagnetiline ühilduvus. Osa 1: Üldpõhimõtted Standardisarja EN 50121 osa 1 esitab kogu sarja struktuuri ja sisu põhijooni. Lisa A kirjeldab raudteesüsteemi tunnussuurusi, mis mõjutavad elektromagnetilise ühilduvuse nähtusi. Lisa B käsitleb raudtee Euroopa Liidu direktiivis 91/440/EMÜ määratletud infrastruktuuri ja rongide vahelise elektromagnetilise ühilduvuse tagamist. Kogu standardisarja eesmärk on sätestada elektromagnetilise emissiooni ja häiringu-kindluse nõuded raudteeseadmetele ja raudteele kui tervikpaigaldisele. EVS-EN 50128 Raudteealased rakendused. Side-, signalisatsiooni- ja andmetöötluse süsteemid. Raudtee juhtimis- ja turvangusüsteemide tarkvara Standard määratleb protseduurid ja tehnilised nõuded programmeeritavate elektrooniliste süsteemide arendamiseks raudteealastes juhtimis- ja turvangurakendustes. Standard on mõeldud kasutamiseks igas valdkonnas, kus on tegemist ohutusega. See võib tähendada nii ülikriitilisi valdkondi, nagu näiteks
ohutussignalisatsioon, kui ka mittekriitilisi, nagu näiteks juhtimisinfosüsteemid. Süsteemid võivad olla teostatud kasutades eraldiseisvaid mikroprotsessoreid, programmeeritavaid loogikakontrollereid, mitme protsessoriga hajutatud süsteeme, suuremaid keskse protsessoriga süsteeme või teisi arhitektuure. EVS-EN 50341-1 Elektriõhuliinid vahelduvpingega üle 45 kV. Osa 1: Üldnõuded – ühised eeskirjad Käesolev standard hõlmab elektriõhuliine vahelduvpingega üle 45 kV ja nimisagedusega alla 100 Hz. Käesolev standard määrab kindlaks uute õhuliinide projekteerimise ja ehitamise üldnõuded, mida tuleb järgida, et kindlustada liini vastavus tema otstarbele, pidades silmas inimeste ohutuse, hoolde, käidu ja keskkonnaalaseid nõudeid. EVS-EN 1856-1 Korstnapits. Nõuded metallist korstnapitsidele. Osa 1: Korstnapitsi süsteemi tooted Käesolev standard määratleb toimimisnõuded metallvooderdise (isolatsiooniga) ühekihilise seinaga ja mitmekihilise seinaga korstnatoodetele (korstna moodulid, korstna liitmikud ja terminaalid, kaasa arvatud toendid), mida kasutatakse küttekehades toimival põlemisel tekkivate toodete toimetamiseks väliskeskkonda. Lisaks sellele määratletakse standardis nõuded tähistamisele, tootja poolt antavatele juhistele, tooteinfole ja vastavushindamisele. Metallist vooderdust ja lõõritorude metallist ühendusi, mis kuuluvad standardi prEN 1856-2:1996 käsitlusalasse, antud standard ei kirjelda. EVS-EN 1857 Korstnad. Komponendid. Betoonist lõõrivooderdised
63
Käesolev Euroopa standard määratleb kihiliste seintega korstnate ehitamiseks kasutatavate, tehases valmistatud betoonist lõõrivooderdiste ja ühendusdetailide materjalid ja nõuded mõõtmetele ja jõudlusele, katsemeetodid kaasa arvatud. Käesolevat standardit kohaldatakse ka korrusekõrguste (kindla kõrgusega) ja armatuuriga lõõrivooderdiste puhul. EVS-EN 1858 Korstnad. Komponendid. Betoonist lõõriga plokid Käesolev Euroopa standard määratleb korstnasüsteemides kasutatavate, punktis 3 kirjeldatud betoonist lõõriplokkide ehitamiseks kasutatavatele materjalidele, mõõtmetele ja toimivusele esitatavad nõuded. Lõõriga plokid võivad olla ühekihilise või kihilise seinaga. Standardit ei kohaldata eriventilatsiooniga korstnate puhul. Standard määratleb ploki tüübi, mille mõõtmed peavad olema vastavuses müüritise elemendi kõrgusega ning mida käsitletakse tüübina B (sideplokk). Käesolevat standardit kohaldatakse ka korrusekõrguste (kindla kõrgusega) ja armatuuriga lõõriplokkide puhul. EVS-EN 12101-2 Suitsu ja kuumuse kontrollsüsteemid. Osa 2: Spetsifikatsioon loomulikku suitsu ja kuumuse jääke eemaldavate ventilaatorite kohta Käesoleva Euroopa standardi antud osa sätestab loomulikku suitsu ja kuumuse jääke eemaldavate süsteemide osade paigaldatavatele suitsu ja kuumus eemaldatavatele ventilatsioonisüsteemidele esitatavad nõuded koos katsemeetoditega. EVS-EN 791 Puurseadmed. Ohutus Käesolev standard käsitleb olulisi mehhaniseeritud puurseadmetega seotud ohte, mille tekkimine on võimalik, kui puurseadmeid kasutatakse tootjafirma poolt ettenähtud oludes ja viisil. Standard määrab kindlaks ohutusnõuded konstrueerimise, valmistamise, kasutamise ja hooldamise kohta. Käesolev standard kehtib nii pealmaa- kui ka allmaatöödel tunnelites, kaevandustes, ehitustel ja puurkaevude puurimisel kasutatavate puurseadmete kohta. Standard käsitleb ka seadmete kesti.
EVS-EN ISO 3744 Akustika. Müraallikate helivõimsuse taseme määramine helirõhu abil. Tehniline meetod mõõtmiseks põhiliselt vabas väljas peegeltasapinna kohta. Käesolev rahvusvaheline standard määratleb helirõhu tasemete mõõtmise meetodi müraallikat ümbritseval pinnal põhiliselt vaba välja tingimustes. Samuti reeglistab Standard nõuded müraallika poolttekitatud helivõimsuse taseme arvutamiseks ühe või enama peegel-tasapinna läheduses. Nõuded esitatakse nii katsekeskkonnale ja mõõteseadmetele kui ka pinna helirõhu taseme mõõtmiseks kasutatavale tehnikale, mille järgi arvutatakse müraallika helivõimsuse taseme tulemused täpsusastmes 2. EVS-EN ISO 3746 Akustika. Müraallikate helivõimsuse taseme määramine helirõhu abil. Seiremeetod, mis kasutab ümbritsevat mõõtepinda peegeltasapinna kohal Käesolev rahvusvaheline standard määratleb helirõhu tasemete mõõtmise meetodi müraallikat ümbritseval pinnal müraallika poolt tekitatud helivõimsuse taseme arvutamiseks. Nõuded esitatakse nii katsekeskkonnale ja mõõteseadmetele kui ka pinna helirõhu taseme mõõtmiseks kasutatavale tehnikale, mille järgi arvutatakse müraallika helivõimsuse taseme tulemused täpsusastmes 3. EVS-ISO 7960 Tööpinkide poolt tekitatav õhumüra. Töötingimused puidutöötlemismasinatele Käesolev rahvusvaheline standard kirjeldab koos teiste müraemissiooni rahvusvaheliste standarditega mehaanilisi ja akustilisi aspekte, mis on vajalikud puidutöötlemismasinate poolt emiteeritud õhumüra kindlaksmääramiseks korratava katsemeetodi abil. EVS-ISO 11094 Akustika. Katsetuseeskiri mootorajamiga muruniidukite, murutraktorite, muru- ja aiatraktorite, professionaalsete niidukite ning niiduklisaseadmetega muru-ja aiatraktorite poolt tekitatud õhumüra mõõtmiseks Käesolev rahvusvaheline standard kirjeldab üksikasjalikult A-korrigeeritud helirõhu tasemete mõõtmise meetodeid mikrofonide kindlaksmääratud asukohtade juures nii masina
64
statsionaarses kui ka liikuvas olekus. Nende väärtuste põhjal arvutatakse välja masina A-korrigeeritud helivõimsuse tase. EVS-EN ISO 22868 Metsamasinad. Käeskantavate sisepõlemismootoriga masinate mürakatsete eeskirjad. Tehniline meetod (Täpsusaste 2) Käesolev rahvusvaheline standard kirjeldab detailselt mürakatsete eeskirja, mille abil on võimalik efektiivselt ja standardiseeritud tingimustel määrata kindlaks käeskantavate sisepõlemis-mootoriga metsamasinate (n. kettsaed, võsalõikurid ja rohutrimmerid) müraemissiooni väärtused. Müraemissiooni omaduste hulka kuuluvad A-kaalutud helirõhu taseme emissioon operaatori töökohal ja A-kaalutud helivõimsuse tase. Eeskirja kasutatakse nii tootja toodangu kontrollimiseks kui ka tüüpkatsetuste käigus. Saadud tulemusi on võimalik kasutada erinevate masinate või sama tooteseeria masinate võrdlemiseks. EVS-EN 338 Ehituspuit. Tugevusklassid Käesolev standard sätestab tugevusklasside süsteemi üldiseks kasutamiseks ehitus-normides. Standard annab igale klassile tugevusomaduste, jäikusomaduste ja tiheduse tunnusväärtused ning reeglid puidukogumite (st liikide, päritolu ja sortide kombi-natsioonide) klassidesse paigutamiseks. Standard kehtib kogu ehituses kasutatava okas- ja lehtpuidu puhul. EVS-EN 408 Puitkonstruktsioonid. Ehituspuit ja liimpuit. Mõnede füüsikaliste ja mehaaniliste omaduste määramine Käesolev standard spetsifitseerib meetodid ehituspuidu ja liimpuidu järgmiste omaduste määramiseks: paindeelastsusmoodul, nihke-moodul, paindetugevus, tõmbe-elastsusmoodul puidukiuga paralleelsel tõmbel, tõmbetugevus puidukiuga paralleelsel tõmbel, surve-elastsusmoodul puidukiuga paralleelsel survel, survetugevus puidukiuga paralleelsel survel, tõmbeelastsusmoodul puidukiuga ristsuunalisel tõmbel, tõmbetugevus puidukiuga rist-suunalisel tõmbel, surveelastsusmoodul puidukiuga ristsuunalisel survel, survetugevus puidukiuga ristsuunalisel survel ja nihke-tugevus.
EVS-EN 14250 Puitkonstruktsioonid. Tootenõuded konstruktsioonilistele stantsitud metallplaatkinnititega valmiselementidele Käesolev standard määrab kindlaks tootenõuded ehitistes ja sildades kasutatavatele sõrmjätkatud või jätkamata ehituspuidust valmistatud stantsitud metallplaatkinnititega koostatud konstruktsioonilistele valmis-elementidele (nt fermid ja talad). EVS-EN 934-3 Betooni ja mördi keemilised lisandid. Osa 3: Müürimördi keemilised lisandid. Määratlused, nõuded, vastavus, tähistus ja sildistus Käesolev Euroopa standard määratleb ja spetsifitseerib nõuded ja vastavuskriteeriumid tsemendipõhistes müürimörtides kasutatavatele keemilistele lisanditele. Standard hõlmab kaht tüüpi keemilisi lisandeid, kestvatoimelised aeglustavad lisandid ja õhku-manustavad/ plastifitseerivad keemilised lisandid, mida kasutatakse tehases ja ehitusplatsil valmistatavates mörtides. EVS-EN 845-1 Müüritarvikute spetsifikatsioonid. Osa 1: Müüriankrud, tõmbeelemendid, talakingad ja konsoolid Käesolev Euroopa standard esitab nõuded müüriankrutele, tõmbelintidele, kingadele ja konsoolidele, mida kasutatakse müüritis-esisestes ühendustes ja müüritise ühendamiseks rajatiste ja hoonete teiste osadega, kaasa arvatud seinad, põrandad, talad ja postid. Juhul, kui ankrud või kinnitid on tarnitud või spetsifitseeritud kui müüritarviku osad, rakenduvad toimivus nõudeid sisaldavad nõuded tootele kui tervikule. EVS-EN 845-2 Müüritarvikute spetsifikatsioonid. Osa 2: Sillused Käesolev Euroopa standard esitab nõuded maksimaalselt kuni 4,5 m laiuste müüritisseina avade sildamiseks ettenähtud valmissillustele, mis on valmistatud terasest, autoklaavsest poorbetoonist, tehiskividest, betoonist, põletatud savitellistest, silikaattellistest, looduslikest kividest või neid materjalide omavahel kombineerides.
65
EVS-EN 845-3 Müüritarvikute spetsifikatsioonid. Osa 3: Sängitusvuugi terassarrusvõrgud Käesolev Euroopa standard esitab nõuded müüritise sängitusvuugi töötavale või konstruktiivsele terassarrusele. Õhkvahega seintes kasutatavate sarrusvõrkude puhul katab käesolev Euroopa standard ainult toimivust sängitusvuugi sarrusena ja mitte müüritisekihte siduva müüriankruna.
EVS-EN 14411 Keraamilised plaadid. Määratlused, liigitus, karakteristikud ja märgistus (ISO 13006:1998, modifitseeritud) Käesolevas Euroopa standardis määratletakse ja esitatakse terminid, nõuded ja märgistamise kriteeriumid esimesse kvaliteedikategooriasse kuuluvatele keraamilis-tele plaatidele (mis on valmistatud märg- ja kuivpressimismenetlusel). Standard hõlmab ka lisas Q esitatud eeskirjade kaudu esimesse kvaliteedikate-gooriasse mittekuuluvaid plaate. EVS-EN 786/A1 Aiapidamisseadmed. Eeslükatavad ja käeshoitavad elektriajamiga murutrimmerid ja muruservatrimmerid. Mehaaniline ohutus Käesolev Euroopa standard määrab kindlaks konstruktsioonile ning tarindusele esitatavad mehhaanilise ohutuse nõuded ning testimiskorra eeslükatavate ja käeshoitavate elektriajamiga murutrimmerite ja muruservatrimmerite suhtes, mida kasutatakse püsti seistes peamiselt rohu niitmiseks ning millel on mittemetalsest kiust (tamiilist) lõikeelemendid või vabalt pöörlev(ad) mittemetalne (-metalsed) lõikur(id), millest ühegi kineetiline energia ei ületa 10 J. EVS-ISO 1180/A1 Suruõhutööriistade pidemed ja padruni läbiviikude mõõdud Käesolev rahvusvaheline standard käsitleb suruõhutööriistade varsi ja vastavaid padruni läbiviike ning hõlmab järgmisi tüüpe : - kivisöepiikvasara pidemed; - meisli pidemed; - needitangide pidemed, paralleelsed; - needitangide pidemed, kitsenevad; - vasara ja labida pidemed; - betoonivasara pidemed; - kivipuuri pidemed.
Loetletud pidemetüübid on seotud masinatega, mille jaoks nad on valmistatud, kuid see ei välista nende pidemete kasutamist ka muudes rakendustes. EVS-ISO 8528-10 Sisepõlemis-kolbmootoriga vahelduvoolugeneraatorid. Osa 10: Välisõhus leviva müra mõõtmine ümbritseva pinna meetodil ISO 8528 määratleb sisepõlemis-kolbmootoriga vahelduvvoolugeneraatorite poolt tekitatud välisõhus leviva müra mõõtemeetodeid nii, et kõiki asjakohaseid müratekitajaid nagu väljalaske- ja jahutussüsteemi müra koos muude mootorimüra allikatega hinnatakse võrreldavate tulemuste saamiseks sama meetodi kohaselt. Kui väljalaske- ja jahutussüsteemid on ühendatud eraldiseisva süsteemiga, siis ei hõlma ISO 8528 selliste süsteemide poolt tekitatava müra mõõtmist. EVS-EN 13318 Tasandusmördid ja põrandate tasanduskihid. Määratlused Käesolev Euroopa standard määratleb tasandusmörtide ja põranda tasanduskihtide valmistamisel ja rakendamisel kasutatavad terminid. Need terminid kehtivad kõigi TC 303 poolt ettevalmistatud standardite puhul. EVS-EN 13813 Tasandusmördid ja põrandate tasanduskihid. Tasandusmördid. Omadused ja nõuded Käesolev Euroopa standard spetsifitseerib nõuded siseruumide põrandates kasutatavatele tasandusmörtidele. Toimivuspõhise standardi saamiseks käsitletakse käesolevas standardis esmajoones toote omadusi, toote valmistamisviisile pööratakse tähelepanu vaid siis, kui see on toote omaduste kirjeldamisel möödapääsmatu. EVS-EN 13830 Rippfassaadid - tootestandard Käesolevas Euroopa standardis spetsifitseeritakse rippfassaadide karakteristikud ja esitatakse tehnilist teavet mitmesuguste kogu Euroopas rakendatavate toimivusnõuete kohta ning katsekriteeriumid ja katsetamise järjekord (katsejada), mille kohaselt toote nõuetele vastavust määratakse. Viidatakse teistele rippfassaadide toimivuse ja
66
katsetamisega seotud Euroopa standarditele ning kui see on asjakohane, juhitakse tähelepanu rippfassaadidesse sisseehitatud tooteid käsitlevatele Euroopa standarditele. EVS-EN 13241-1 Tööstus-, kommerts-, ning garaažiuksed ja –väravad. Tootestandard. Osa 1: Tooted, millele ei esitata tulepüsivus- või suitstõkestusnõudeid
Käesolev Euroopa standard spetsifitseerib ohutus- ja toimivusnõuded ustele, väravatele ja tõketele, mis on mõeldud paigaldamiseks inimtegevusega seotud kohtadesse ja mille peamiseks kasutusotstarbeks on tagada tööstus-, äri- ja eluhoonetes ohutu ligipääs kaupadele ning sõidukitele, mida saadavad või juhivad inimesed.
STANDARDITE MÜÜGI TOP JUULI
Tähis
Pealkiri Kogus
1 EVS 812-4:2005 Ehitiste tuleohutus. Osa 4: Tööstus- ja laohoonete ning garaažide tuleohutus
16
2 EVS käsiraamat:2003 ISO 9001 väikeettevõtetele 133 EVS 812-2:2005 Ehitiste tuleohutus. Osa 2: Ventilatsioonisüsteemid 104 EVS-EN 12665:2005 Valgus ja valgustus. Põhioskussõnad ja valgustusnõuete
valiku alused 9
5 EVS 812-6:2005 Ehitiste tuleohutus. Osa 6: Tuletõrje veevarustus 96 EVS-EN 50172:2005 Evakuatsiooni hädavalgustussüsteemid 97 EVS 812-3:2002 Ehitiste tuleohutus. Osa 3: Küttesüsteemid 98 EVS-EN ISO 14001:2004 Keskkonnajuhtimissüsteemid – nõuded koos kasutusjuhistega 79 EVS 807:2004 Kinnisvara korrashoiu tagamise tegevused 710 EVS 843:2003 Linnatänavad 5
JUULIKUUS EESTI KEELES MÜÜGILE SAABUNUD STANDARDID
EVS-EN 50110-1:2005 Elektripaigaldiste käit 208.- Standard on identne Euroopa standardiga EN 50110-1:2004 “Operation of electrical installations. Standard sätestab elektripaigaldiste ohutu käidu ja elektripaigaldistes, nende juures või lähedal sooritatavate töötoimingute ohutusnõuded. Need nõuded kehtivad operatiiv-, töö- ja hooldetoimingute kohta. Standard kehtib kõigi nii mitteelektritööde (nt õhu- või kaabelliinide läheduses tehtavate ehitustööde) kui ka elektritööde kohta, kui on tegemist elektrilise ohuga.
EVS-EN 50366:2005 Kodumasinad ja teised analoogilised elektriseadmed. Elektromagnetväljad. Hindamise ja mõõtmise meetodid 180.- Standard on Euroopa standardi EN 50366:2003 “Household and similar electrical appliances – Electromagnetic fields – Methods for evaluation and measurement” identne tõlge eesti keelde. Standard käsitleb elektromagnetilisi välju ja defineerib meetodid elektri- ja magnetvälja hindamiseks sagedustel kuni 300 GHz kodumasinate ja teiste analoogiliste seadmete ümber.
67
EVS-EN 60664-3:2005 Madalpingevõrkudes kasutatavate seadmete isolatsiooni koordinatsioon. Osa 3: Ühe- ja kahepoolsete pinnakatete ning kompaundivormide kasutamine saastekaitseks 171.- Standard on Euroopa standardi EN 60664-3:2003 “Insulation coordination for equipment within low-voltage systems. Part 3: Use of coating, potting or moulding for protection against pollution” identne tõlge eesti keelde. Standard rakendub seadmetele, mis on saastamise vastu kaitstud ühe- ja kahepoolsete pinnakatete ning kompaundivormide abil ja mis võimaldab seeläbi vähendada õhkvahemikke ning lekkeradasid, nagu on
kirjeldatud osades 1 ja 5. Standard rakendub samuti igat tüüpi trükkplaatidele, k.a mitmekihiliste plaatide sisekihtide pindadele, ning nende põhimikele ja muul sarnasel viisil kaitstud koostetele. EVS 812-5:2005 Ehitiste tuleohutus. Osa 5: Kütuseterminalide ja tanklate tuleohutus 162.- Standard sätestab ehituslikud tuleohutus-nõuded põlevvedelike käitlemisega tegelevatele tanklatele ja terminalidele (VI kasutusviis), ning vastava tegevusega muude hoonete ja rajatiste piisavalt ohutuks projekteerimiseks ja ehitamiseks.
Standardite müük toimub Standardikeskuses Aru tn 10, 10317, Tallinn Telefon: 605 5060, 605 5061 Faks: 605 5063 E-mail: [email protected]
Ostu saab sooritada ka meie koduleheküljel asuvas ostukorvis www.evs.ee/POOD
Tutvuda saab standarditega EVS raamatukogus: Telefon: 605 5065, 605 5064 E-mail: [email protected]
68