sl_gsec(en)-_1vcp000480.pdf
TRANSCRIPT
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
1/15
GSecGas-insulated switch-disconnector
Product presentation
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
2/15
SF6-insulated switch-disconnector
3 positions: LINE OPEN EARTHED(separate slots for opening and earthing)
Suitable for metal-enclosed secondary
distribution switchgear
(incoming/outgoing, with CB and fuses)
Safety
Lower part in stainless steel for partition
metallic (PM) classified panels
Interlocks to prevent incorrect operations
Plug&play accessories to cover a wide range
of applications
Reduced maintenance
Compact design
GSecMain feature
Month DD, Year | Slide 2
ABB Group
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
3/15
GSec
Standards:
IEC 60694,
IEC 62271-102,
IEC 62271-105,
IEC 60265-1.
Operating
temperature:
-5C +40C (5)
Max installation
altitude:
3000 m (6)
Phase distance:
230mm
SF6pressure:
1,48 bar
(absolute)
(5) According to IEC 62271
(6) Ka correction factor
needed according to
62271-1
Main data and ratings
Month DD, Year | Slide 3
ABB Group
Electrical characteristics
Rated voltage kV 12 17,5 24
Withstand voltage (50/60 Hz, 1 min)- Phase-phase and phase-earth kV 28 38 50
- Between open contacts kV 32 45 60
Impulse withstand voltage (BIL 1.2/50 s)
- Phase-phase and phase-earth kVp 75 95 125
- Between open contacts kVp 85 110 145
Rated frequency Hz 50-60 50-60 50-60
Rated current A 800 (1) 800 (1) 630
Rated short-time withstand current kA 25(2s) (2) 20(3s) (2) (3) 16(3s) - 20(3s) (2) (3)
Rated short-time making capacity kAp 63 52,5 40 - 52,5
Breaking capacity
- Active load A 800 (1) 800 (1) 630
- No-load transformers A 16 16 16
- No-load lines A 25 25 25
- No-load cables A 50 50 50
- Ring circuit A 800 (1) 800 (1) 630
(1)up to 630A for GSec/T2
(2)
up to 16kA(3s) for GSec/T2(3)For 21 kA (3s) please contact ABB
Electrical and mechanical performance
Line electrical endurance class E3 - up to 5 makings and 100 breaking of rated current
Earth electrical endurance class E2 - up to 5 makings
Line mechanical endurance with 1S - Single spring actuator class M2 - up to 5000 mechanical operations
Line mechanical endurance with 2S - Double spring actuator class M1 - up to 1000 mechanical operations
Earth mechanical endurance class M0 - up to 1000 mechanical operations
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
4/15
GSec/T1 Three positions switch disconnector
1S Single spring mechanism
Incoming/outgoing panels
Typical unitsGSec/T1 and GSec/T2
Month DD, Year | Slide 4
ABB Group
GSec/T2 Three positions switch disconnector
2S Double spring mechanism (stored energy)
Incoming/outgoing panels
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
5/15
GSec/T2F
Three positions switch disconnector
2S Double spring mechanism
Fuse tripping system
Earthing switch with transmission
Fuse base
Fuse blown indicator
Typical unitsGSec/T2F and GSec/IB
Month DD, Year | Slide 5
ABB Group
GSec/IB
Three positions switch disconnector
1S Single spring mechanism
Earthing switch with transmission
For panels with removable circuit breakers
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
6/15
GSecMain components and dimensions
Month DD, Year | Slide 6
ABB Group
In Line
Open
Earth
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
7/15
Lower part in stainless steel:
PM classified (metallic partition)
No leakage currents
Maximum personnel safety
Panel classified LSC2A Compact design:
Upper part in epoxy resin
Capacitive sockets integrated in the apparatus
lower insulators
Cable connection directly to the lower bushings
Granted Sealed for life for 30 years
according to IEC 60694
Gas exhaust valve
ComponentsPower part Enclosure
Month DD, Year | Slide 7
ABB Group
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
8/15
Components
1SSingle Spring 2SDouble Spring
Closing/
Opening
Operating energy is provided by
charging a spring (lever or motor),
which, when released, causes the
contacts to open or close
- Springs charging (with lever or motor)
- Using the stored energy for closing and
opening operations (with pushbuttons or shunts)
Speed of the
operationIndependent Independent
Manual
operation Lever Lever and pushbutton
Automatic
operationMotor Motor and coils
Earthing
switch
function
- Operating energy is provided by charging a spring (with a lever),
which, when released, causes the contacts to open or close
- Independent speed
Safety
- Separate lever insertion point for line and earth operation- Operating lever with anti-reflex function
- For motor operated actuators, in case of emergency, it is always possible to operate
manually the actuators
Note
- In combination with fuses, opening can be
triggered by the fuse striker
- Possibility to discharge springs once loaded
Actuators
Month DD, Year | Slide 8
ABB Group
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
9/15
ComponentsActuators diagrams
Month DD, Year | Slide 9
ABB Group
Position of line contact (0 = open, 1 = closed)
Spring status (0% = discharged, 100% = charged)
Spring charging time
- manual operation: depend on operator
- automatic operation with motor = 3-4 s.
Tc Opening or closing time of the contact < 0,3 s.
Tclose Total closing time < 5 s.
Topen Total opening time < 5 s.
Ts1
Position of line contact (0 = open, 1 = closed)
Springs status (0% = discharged, 100% = charged)
Springs charging time
- manual operation: depend on operator
- automatic operation with motor = 3-4 s.
Tc Opening or closing time of the contact < 0,3 s.
Tclose Total closing time < 0,3 s.
Topen Total opening time < 0,3 s.
Ts2
1S
Single Spring 2S
Double Spring
timetime
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
10/15
Components
1. Line operating slot
2. Earth operating slot
3. Line diagram with indicators
(mounted directly on the
operating shaft)
4. Pushbuttons (for 2S actuator)
5. Voltage indicators6. Spring charged signal
7. Fuse blown signal
Front cover
Month DD, Year | Slide 10
ABB Group
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
11/15
ComponentsAccessories 1/4
ABB Group3th May Slide 11
Auxiliary contacts
4 line + 4 earth
Each can be a make
contact or a break contact
250 VAC - 16A
250 VDC - 0,3A
Spring charging motor
For 1S and 2S actuators
AC (50Hz): 48, 110 and 220 V
DC: 24, 48, 110 and 220 V
Voltage indicators
VPIS type
Capacitive dividers
integrated in the apparatus
bottom isolators
Possibility to perform phase
concordance
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
12/15
ComponentsAccessories 2/4
ABB Group3th May Slide 12
Key locks type: standard, Ronis and Profalux
Possibility to use up to 3 padlocks
Fuse blown signaling contact
Make or break contact
In addition to the mechanical indicator
For GSec/T2F
Key locks and padlocking
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
13/15
ComponentsAccessories 3/4
ABB Group3th May Slide 13
Shunt opening release (MBO)
and shunt closing release (MBC)
DC: 24, 48, 60, 110-132, 220-250
AC (50-60Hz): 48, 60, 110-127, 220-250
For GSec/T2 and /T2F
Undervoltage release (MBU)
DC: 24, 48, 60, 110-132, 220-250
AC (50Hz): 48, 60, 110-132(*), 220-250(*) For GSec/T2 and /T2F
(*) available also for 60Hz
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
14/15
ComponentsAccessories 4/4
ABB Group3th May Slide 14
Temperature-compensated pressure switch Manometer
Analogic indication
Temperature-compensated scale
Possibility to have also an electrical output of
the pressure
Temperature-compensated device
Possibility to have also an electrical output of
the pressure
-
8/10/2019 SL_GSEC(EN)-_1VCP000480.pdf
15/15