sni peta

RSNI3

Standar Nasional Indonesia

Pertukaran data lintang, bujur, dan tinggi lokasi geografis

ICS 35.040

Badan Standardisasi Nasional

i

Daftar Isi Daftar isi ········································································································································ i

Prakata ························································································································································· ii

0 Pendahuluan··························································································································· 1

1 Lingkup dan bidang aplikasi ··································································································· 1

2 Ketentuan penyajian lintang, bujur dan tinggi········································································· 1

2.1 Lintang································································································································· 2

2.2 Bujur ···································································································································· 2

2.3 Tinggi ··································································································································· 3

2.4 Format ································································································································· 3

3 Sistem referensi koordinat ······································································································ 3

4 Contoh ···································································································································· 4

Lampiran A ··································································································································· 8

Bibliografi ····································································································································· 9

ii

Prakata

Standar ini adalah hasil adopsi dengan modifikasi dari Standar Internasional ISO 6709:1983 versi E, Standard representation of latitude, longitude and altitude for geographic point locations. Panitia Teknis yang bertanggung jawab untuk standar ini adalah Panitia Teknis 07-01, Bidang Informasi Geografi/Geomatika. Dalam teks standar ini dilakukan perubahan editorial sebagai berikut:

a. kata ”standar internasional” diganti dengan ”standar nasional” ; b. lampiran informatif ditambahkan untuk memberi petunjuk bagi pengguna.

1 dari 9

Pertukaran data lintang, bujur, dan tinggi lokasi geografis 0 Pendahuluan Pertukaran data yang efisien untuk lokasi geografis memerlukan format yang secara umum dapat diinterpretasikan. Format tersebut harus memiliki identifikasi yang unik dari titik lokasi geografis yang berada di atas, di bawah atau pada permukaan bumi. Pengguna dalam berbagai bidang disiplin yang berbeda dapat memiliki persyaratan yang berbeda. Secara umum penyajian lintang dan bujur menggunakan derajat, menit dan detik. Penyajian ini dapat ditambahkan dengan desimal derajat, desimal menit dan desimal detik. Pengguna dapat juga membutuhkan ketelitian derajat yang berbeda dan menggunakan lintang dan bujur tanpa informasi ketinggian. Standar nasional ini menetapkan format panjang variabel yang memiliki fleksibilitas untuk mengakomodasi persyaratan-persyaratan yang berbeda. Penggunaan standar nasional ini akan :

a) mengurangi biaya pertukaran data; b) mengurangi waktu yang dibutuhkan dalam mengkonversi struktur kode yang tidak

standar dengan menyediakan standar format pertukaran. 1 Lingkup dan bidang aplikasi Standar nasional ini menetapkan format panjang variabel untuk penyajian lintang, bujur dan tinggi dalam penggunaan pertukaran data. Penyajian tinggi merupakan suatu pilihan, ada atau tidaknya adalah implisit dalam format tersebut. Standar nasional ini dapat menggunakan notasi umum seksagesimal yang terdiri atas derajat, menit, dan detik, sebagai kombinasi dari seksagesimal dan notasi desimal yaitu derajat dan desimal derajat; derajat, menit dan desimal menit; derajat, menit, detik, dan desimal detik. Notasi tersebut menggunakan karakter-karakter angka 0-9, positif (+), negatif (-), dan titik (.). Standar nasional ini tidak menetapkan penggunaan format panjang field secara pasti, karena hal ini membutuhkan persetujuan terlebih dahulu dari pihak-pihak yang terlibat dalam pertukaran data, meskipun format panjang field tersebut sesuai dengan format dalam standar nasional ini. Standar nasional ini tidak membutuhkan prosedur internal khusus, teknik pengorganisasian file, media penyimpanan, bahasa dan sebagainya untuk digunakan dalam implementasinya. 2 Ketentuan penyajian lintang, bujur dan tinggi 2.1 Lintang 2.1.1 Posisi lintang di sebelah utara khatulistiwa diberikan tanda positif (+), posisi lintang di sebelah selatan khatulistiwa diberikan tanda negatif (-), dan posisi lintang pada garis khatulistiwa diberi tanda positif (+).

2 dari 9

2.1.2 Dua digit pertama dari lintang-lintang tersebut merepresentasikan derajat. Digit-digit berikutnya menjelaskan menit, detik, atau pecahan desimal sesuai dengan kesepakatan selanjutnya, dalam hal ini tanda desimal titik (.) menunjukkan perubahan dari sistem seksagesimal menjadi sistem desimal: Derajat dan derajat desimal:

DD.DD Derajat, menit, dan menit desimal:

DDMM.MMM Derajat, menit, detik, dan detik desimal:

DDMMSS.SS 2.1.3 Apabila nilai derajat kurang dari 10 maka angka 0 disisipkan di depan nilai derajat tersebut, dan jika menit atau detik kurang dari 10 maka angka-angka 0 ditambahkan pada posisi yang sesuai. 2.2 Bujur 2.2.1 Posisi bujur di sebelah timur Greenwich diberikan tanda positif (+), posisi bujur di sebelah barat Greenwich diberikan tanda negatif (-). Meridian 0 diberikan tanda positif (+). Meridian 180 diberikan tanda negatif (-). 2.2.2 Tiga digit pertama dari bujur-bujur tersebut merepresentasikan derajat. Digit-digit berikutnya menjelaskan menit, detik atau pecahan desimal sesuai dengan kesepakatan selanjutnya, dalam hal ini tanda desimal titik (.) menunjukkan perubahan dari sistem seksagesimal menjadi sistem desimal: Derajat dan derajat desimal:

DDD.DD Derajat, menit, dan desimal menit:

DDDMM.MM Derajat, Menit, detik, dan desimal detik:

DDDMMSS.SS 2.2.3 Apabila nilai derajat kurang dari 100 maka angka-angka 0 disisipkan di depan nilai derajat tersebut, dan jika menit atau detik kurang dari 10 maka angka 0 ditambahkan pada posisi yang sesuai.

3 dari 9

2.3 Tinggi 2.3.1 Penyajian tinggi merupakan pilihan. Jika tinggi disajikan harus sesuai dengan subpasal 2.3.2 dan 2.3.3. 2.3.2 Posisi tinggi di atas datum referensi vertikal diberikan tanda positif (+), tinggi di bawah datum referensi vertikal diberikan tanda negatif (-). Posisi tinggi pada datum referensi vertikal diberikan tanda positif (+). CATATAN – Datum referensi vertikal dapat menggunakan permukaan laut. 2.3.3 Posisi tinggi disajikan dalam meter dan menggunakan pecahan-pecahan desimal bila diperlukan. CATATAN — Sebagai alternatif, kaki (feet) dapat digunakan, tetapi harus disebutkan pada dokumentasi-dokumentasi yang berhubungan dengan pertukaran data tersebut. 2.4 Format 2.4.1 Format penyajian lokasi geografis diurutkan sebagai berikut:

a) Lintang b) Bujur

c) Tinggi, jika disajikan

2.4.2 Tanda ”+” atau ”-” yang dimiliki bilangan, diletakkan di depan bilangan tersebut. 2.4.3 Jumlah digit angka untuk lintang, bujur, dan tinggi menunjukkan ketelitian data yang ada. 2.4.4 Lintang dan bujur untuk sebuah titik tertentu dinyatakan dalam format dan ketelitian yang sama. Hal ini tidak berlaku untuk tinggi. 2.4.5 Tidak ada tanda pemisah antara unsur lintang, bujur dan tinggi. CATATAN — Penggunaan tanda ”+” dan ”-” di depan bilangan pada setiap unsur dapat dikenali sebagai bagian awal setiap unsur. 2.4.6 Rangkaian titik lokasi harus diberi tanda akhir. Karakter tanda akhir tersebut adalah (/), kecuali jika tanda yang lainnya sudah ditentukan dalam dokumen yang berhubungan dengan pertukaran tersebut. 3 Sistem referensi koordinat Informasi sistem referensi koordinat dicantumkan dalam file tambahan terhadap file utama yang berisi file koordinat. Informasi ini terdiri dari identitas titik dan identitas sistem referensi koordinat. Integrasi file koordinat dengan sistem referensi koordinat memperhatikan rekomendasi ISO 19111.

4 dari 9

4 Contoh Contoh rangkaian titik lokasi yang sesuai dengan standar ini disajikan pada Tabel 1 dan Tabel 2. Tanda titik pada format penulisan dalam Tabel 1 dan Tabel 2, dibaca menjadi koma pada cara pembacaan.

Tabel 1. Contoh rangkaian titik lokasi dengan informasi lintang dan bujur

No. Satuan lintang dan bujur Format penulisan Cara pembacaan 1 derajat +03+106/ tiga derajat lintang utara, seratus enam

derajat bujur timur 2 derajat dan derajat desimal +03.20361+106.00417/ tiga koma dua nol tiga enam satu derajat

lintang utara, seratus enam koma nol nol empat satu tujuh derajat bujur timur

3 derajat dan menit +0312+10600/ tiga derajat dua belas menit lintang utara, seratus enam derajat nol menit bujur timur

4 derajat, menit, dan desimal menit +0312.22+10600.25/ tiga derajat dua belas koma dua dua menit lintang utara, seratus enam derajat nol koma dua lima menit bujur timur

5 derajat, menit, dan detik +031213+1060015/ tiga derajat dua belas menit tiga belas detik lintang utara, seratus enam derajat nol menit lima belas detik bujur timur

6 derajat, menit, dan detik +020000-0850000/ dua derajat nol nol menit nol nol detik lintang utara, delapan puluh lima derajat nol menit nol detik bujur barat

7 derajat, menit, detik dan desimal detik -031213.1+1060015.1/ tiga derajat dua belas menit tiga belas koma satu detik lintang selatan, seratus enam derajat nol menit lima belas koma satu detik bujur timur

8 derajat, menit, detik dan desimal detik +020000.1+0850000.1/ dua derajat nol menit nol koma satu detik lintang utara, delapan puluh lima derajat nol menit nol koma satu detik bujur timur

5 dari 9

Tabel 2. Contoh rangkaian titik lokasi dengan informasi lintang, bujur dan tinggi

No. Satuan Lintang, Bujur dan Tinggi Format Penulisan Cara Pembacaan

1 derajat dan meter +03+106+350/ tiga derajat lintang utara, seratus enam derajat bujur timur, tiga ratus lima puluh meter di atas permukaan referensi vertikal

2 derajat, desimal derajat, dan meter

+03.20361+106.00417+350.517/ tiga koma dua nol tiga enam satu derajat lintang utara, seratus enam koma nol nol empat satu tujuh derajat bujur timur, tiga ratus lima puluh koma lima ratus tujuh belas meter di atas permukaan referensi vertikal

3 derajat, menit, dan meter +0312+10600-169.2/ tiga derajat dua belas menit lintang utara, seratus enam derajat nol menit bujur timur, seratus enam puluh sembilan koma dua meter di bawah permukaan referensi vertikal

4 derajat, menit, desimal menit, dan meter

+0312.22+10600.25-169.2/ tiga derajat dua belas koma dua dua menit lintang utara, seratus enam derajat nol koma dua lima menit bujur timur, seratus enam puluh sembilan koma dua meter di bawah permukaan referensi vertikal

5 derajat, menit, detik, dan meter

+031213+1060015+2.79/ tiga derajat dua belas menit tiga belas detik lintang utara, seratus enam derajat nol menit lima belas detik bujur timur, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal

6 derajat, menit, detik, dan meter

+020000-0850000+2.79/ dua derajat nol nol menit nol nol detik lintang utara, delapan puluh lima derajat nol menit nol detik bujur barat, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal

7 derajat, menit, detik, desimal detik, dan meter

-031213.1+1060015.1+2.79/ tiga derajat dua belas menit tiga belas koma satu detik lintang selatan, seratus enam derajat nol menit lima belas koma satu detik bujur timur, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal

6 dari 9

Tabel 2. (lanjutan)

No. Satuan Lintang, Bujur dan Tinggi Format Penulisan Cara Pembacaan

8 derajat, menit, detik, desimal detik, dan meter

+020000.1+0850000.1+2.79/ dua derajat nol menit nol koma satu detik lintang utara, delapan puluh lima derajat nol menit nol koma satu detik bujur timur, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal

7 dari 9

Lampiran A (informatif)

Daftar deviasi teknis

No Bagian Pasal dan Subpasal dalam ISO 6709 Modifikasi dalam SNI Keterangan

1 Judul Standar penyajian data lintang, bujur dan tinggi untuk lokasi titik geografis

Standar pertukaran data lintang, bujur, dan tinggi lokasi geografis

kata penyajian diganti dengan pertukaran, kata titik dihilangkan

2 Isi Subpasal 2.3.2 Subpasal 2.3.2 Penambahan catatan pada subpasal 2.3.2

3 Isi - Pasal 3 Sistem referensi koordinat

Informasi mengenai sistem referensi koordinat ditambahkan pada SNI ini

4 Isi Pasal 3, Examples, point a) sampai n)

Tabel 1 dan Tabel 2 Point a) sampai n) diubah menjadi dua buah tabel

8 dari 9

Bibliografi ISO 6709 (E), Standard representation of latitude, longitude and altitude for geographic point

locations, ISO, 1983.

9 dari 9

RSNI2 Standar Nasional Indonesia

Metadata

Pusat Sistem Jaringan dan Standardisasi Data Spasial Badan Koordinasi Survei dan Pemetaan Nasional (BAKOSURTANAL)

Federal Geographic Data CommitteeDepartment of Agriculture ! Department of Commerce ! Department of Defense ! Department of

EnergyDepartment of Housing and Urban Development ! Department of the Interior ! Department of State

Department of Transportation ! Environmental Protection AgencyFederal Emergency Management Agency ! Library of Congress

National Aeronautics and Space Administration ! National Archives and Records AdministrationTennessee Valley Authority

FGDC-STD-001-1998

Content Standard for Digital Geospatial Metadata

Metadata Ad Hoc Working GroupFederal Geographic Data Committee

Federal Geographic Data CommitteeDepartment of Agriculture ! Department of Commerce ! Department of Defense ! Department of

EnergyDepartment of Housing and Urban Development ! Department of the Interior ! Department of State

Department of Transportation ! Environmental Protection AgencyFederal Emergency Management Agency ! Library of Congress

National Aeronautics and Space Administration ! National Archives and Records AdministrationTennessee Valley Authority

Federal Geographic Data Committee

Established by Office of Management and Budget Circular A-16, the Federal Geographic Data Committee(FGDC) promotes the coordinated development, use, sharing, and dissemination of geographic data.

The FGDC is composed of representatives from the Departments of Agriculture, Commerce, Defense,Energy, Housing and Urban Development, the Interior, State, and Transportation; the EnvironmentalProtection Agency; the Federal Emergency Management Agency; the Library of Congress; the NationalAeronautics and Space Administration; the National Archives and Records Administration; and theTennessee Valley Authority. Additional Federal agencies participate on FGDC subcommittees andworking groups. The Department of the Interior chairs the committee.

FGDC subcommittees work on issues related to data categories coordinated under the circular. Subcommittees establish and implement standards for data content, quality, and transfer; encourage theexchange of information and the transfer of data; and organize the collection of geographic data to reduceduplication of effort. Working groups are established for issues that transcend data categories.

For more information about the committee, or to be added to the committee's newsletter mailing list,please contact:

Federal Geographic Data Committee Secretariatc/o U.S. Geological Survey

590 National CenterReston, Virginia 20192

Telephone: (703) 648-5514Facsimile: (703) 648-5755

Internet (electronic mail): [email protected] FTP: fgdc.er.usgs.gov

WWW Home Page: http://www.fgdc.gov

The following is the recommended bibliographic citation for this publication: Federal Geographic Data Committee. FGDC-STD-001-1998. Content standard for digital geospatialmetadata (revised June 1998). Federal Geographic Data Committee. Washington, D.C.

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial Metadata

iii

CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Organization of the Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Metadata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Identification Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Data Quality Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Spatial Data Organization Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Spatial Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Entity and Attribute Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Distribution Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Metadata Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Citation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Time Period Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Appendix AGlossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix BAlphabetical List of Compound Elements and Data Elements . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Appendix CReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Appendix DGuidelines for Creating Extended Elements in the Content Standard for Digital GeospatialMetadata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Appendix EGuidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata . . . 77


The variety of means of organizing data in a computer, the differences among data providers to describe1

their data holdings because of varying institutional and technical capabilities, the rapid evolution of meansto provide information through the Internet for different purposes, and the need to accommodate existingstandards have guided the evolution of this decision. The FGDC is pursuing several implementation methods.

iv

Introduction

1. Objectives. The objectives of the standard are to provide a common set of terminology and definitionsfor the documentation of digital geospatial data. The standard establishes the names of data elements andcompound elements (groups of data elements) to be used for these purposes, the definitions of thesecompound elements and data elements, and information about the values that are to be provided for thedata elements.

The major uses of metadata are:C to maintain an organization's internal investment in geospatial data, C to provide information about an organization's data holdings to data catalogues, clearinghouses,

and brokerages, andC to provide information needed to process and interpret data to be received through a transfer from

an external source.

The information included in the standard was selected based on four roles that metadata play:C availability -- data needed to determine the sets of data that exist for a geographic location.C fitness for use -- data needed to determine if a set of data meets a specific need.C access -- data needed to acquire an identified set of data.C transfer -- data needed to process and use a set of data.

These roles form a continuum in which a user cascades through a pyramid of choices to determine whatdata are available, to evaluate the fitness of the data for use, to access the data, and to transfer and processthe data. The exact order in which data elements are evaluated, and the relative importance of dataelements, will not be the same for all users.

2. Scope. This standard is intended to support the collection and processing of geospatial metadata. It is intended tobe useable by all levels of government and the private sector. The standard is not intended to reflect animplementation design. An implementation design requires adapting the structure and form of thestandard to meet application requirements.

The standard was developed from the perspective of defining the information required by a prospectiveuser to determine the availability of a set of geospatial data; to determine the fitness and the set ofgeospatial data for an intended use; to determine the means of accessing the set of geospatial data; and tosuccessfully transfer the set of geospatial data. As such, the standard establishes the names of dataelements and compound elements to be used for these purposes, definitions of these data elements andcompound elements, and information about the values that are to be provided for the data elements. Thestandard does not specify the means by which this information is organized in a computer system or in adata transfer, nor the means by which this information is transmitted, communicated, or presented to theuser.1


v

3. Applicability This standard is for the documentation of geospatial data. Executive Order 12906, "CoordinatingGeographic Data Acquisition and Access: The National Spatial Data Infrastructure," was signed on April11, 1994, by President William J. Clinton. Section 3, Development of a National Geospatial DataClearinghouse, paragraph (b) states: "Standardized Documentation of Data. Beginning nine monthsfrom the date of this order, each agency shall document all new geospatial data it collects or produces,either directly or indirectly, using the standard under development by the FGDC, and make thatstandardized documentation electronically accessible to the Clearinghouse network. Within one year ofthe date of this order, agencies shall adopt a schedule, developed in consultation with the FGDC, fordocumenting, to the extent practicable, geospatial data previously collected or produced, either directly orindirectly, and making that data documentation electronically accessible to the Clearinghouse network." This standard is the data documentation standard referenced in the executive order.

The FGDC invites and encourages organizations and persons from State, local, and tribal governments,the private sector, and non-profit organizations to use the standard to document their geospatial data. Amajor difficulty in the geospatial data community is the lack of information that helps prospective users todetermine what data exist, the fitness of existing data for planned applications, and the conditions foraccessing existing data, and to transfer data to a user's system. This standard, developed with aid of broadpublic participation, will help to ease these problems and to develop the National Spatial DataInfrastructure.

4. Related StandardsThe Spatial Data Transfer Standard (SDTS) was developed to allow the transfer of digital spatial data setsbetween spatial data software. The Content Standard for Digital Geospatial Metadata was developed toidentify and define the metadata elements used to document digital geospatial data sets for many purposes. These include metadata to: 1) preserve the meaning and value of a data set; 2) contribute to a catalog orclearinghouse and; 3) aid in data transfer. Since the SDTS is a standard for data transfer, its primarymetadata content is used to determine the fitness of the data set for the user's purpose. There is a closerelationship between the Metadata Standard and the SDTS metadata elements contained in the DataQuality module, and in other locations inside of the SDTS transfer set. Since the Metadata Standardcontains metadata used to search for digital spatial data sets through a clearinghouse (metadata forlocating, describing access, use, and distribution), these elements may not be contained in the SDTStransfer set.

The Content Standard for Digital Geospatial Metadata uses to the maximum extent possible, existingInternational or National Standards, as documented in Office of Management and Budget Circular A-119“Federal Participation in the Development and Use of Voluntary Consensus Standards and in Conformityassessment Activities.” American National Standards referenced in the Content Standard for DigitalGeospatial Metadata include the American National Standards Institute, 1975, Representations ofuniversal time, local time differentials, and United States time zone reference for information interchange(ANSI X3.51-1975): New York, American National Standards Institute; American National StandardsInstitute, 1986, Representation for calendar date and ordinal date for information interchange (ANSIX3.30-1985): New York, American National Standards Institute; American National Standards Institute,1986, Representations of local time of day for information interchange (ANSI X3.43-1986): New York,American National Standards Institute.

The June 8, 1994 FGDC Metadata Standard was used as the base document for International Organizationfor Standardization (ISO) 15046 Part 15. The draft ISO Metadata Standard 15046 Part 15 has had anumber of changes made to it. At this time this revision was prepared, the ISO Metadata Standard wasstill in Committee Draft form and subject to significant change before final approval, therefore, is not


formally the American Society for Testing and Materials2

vi

identical to the current ISO draft but is thought to be consistent with it.

5. Standards Development ProcessThe Federal Geographic Data Committee (FGDC) initiated work on the first version of the standard inJune, 1992, through a forum on geospatial metadata. At the forum, the participants agreed on the needfor a standard on the information content of metadata about geospatial data. The committee accepted theoffer of ASTM Section D18.01.05 to develop a draft information content standard. The draft was slightly2

revised, and offered for public review from October 1992 to April 1993. Extensive comments werereceived from the public. The FGDC Standards Working Group revised the draft. The revised draft wasprovided for further review and testing in July 1993. Refined drafts were offered for review and testing inJanuary and March 1994. The first version was approved June 8, 1994.

Since the FGDC Metadata Standard was adopted, it has been implemented by numerous Federal, state,and local agencies, companies, and groups. It has also been used by other nations as they develop theirown national metadata standards. Proposed changes to the Metadata Standard have been suggestedduring the time since it was issued. Further, an implementor’s workshop was held specifically to discussstrengths, weaknesses, and proposed improvements. Drawing on this body of knowledge, the FGDCproposed to modify the current Metadata Standard. The June 1998 version is fully backward compatible with and supersedes the June 8, 1994 version. TheJune 1998 version provides for the definition of Profiles (Appendix E) and extensibility through UserDefined Metadata Extensions (Appendix D). The June 1998 version also modifies some production rulesto ease implementation.

6. Maintenance Authority. The current maintenance authority for the standard is the FGDC Secretariat.The Federal Geographic Data Committee is the approving authority for the standard. Questionsconcerning the standard are to be addressed to the FGDC Secretariat, in care of the U.S. GeologicalSurvey, 590 National Center, Reston, Virginia 20192. Copies of this publication are available from theFederal Geographic Data Committee. Secretariat, in care of the U.S. Geological Survey, 590 NationalCenter, Reston, Virginia 20192; telephone (703) 648-5514; facsimile (703) 648-5755; Internet (electronicmail) [email protected]. The text also is available from anonymous File Transfer Protocol (anonymous ftp)server fgdc.er.usgs.gov and at the FGDC web site http://www.fgdc.gov/metadata.


vii

Organization of the Standard

Numbered Sections

The standard is organized in a hierarchy of data elements and compound elements that define theinformation content for metadata to document a set of digital geospatial data. The starting point is"metadata" (section 0). The compound element "metadata" is composed of other compound elementsrepresenting different concepts about the data set. Each of these compound elements has a numberedsection in the standard. In each numbered section, these compound elements are defined by othercompound elements and data elements. The section "contact information" is a special section thatspecifies the data elements for contacting individuals and organizations. This section is used by othersections, and is defined once for convenience.

Each section begins with the name and definition of the compound element that defines the section. Thename and definition are followed by production rules (see below) that define this compound element interms of data elements, either directly or by the use of intermediate compound elements. Whenintermediate compound elements are used, the production rules for these elements also are provided inthis part of the section.

Additional information about the organization of the Standard follows:

C The production rules are followed by a list of names and definitions of compound elements and dataelements used in the section.

C Section and element numbers are provided for user navigation of the standard. They are neitherauthoritative nor intended for use in implementation and are subject to change in future revisions ofthe standard.

Compound Elements

A compound element is a group of data elements and other compound elements. All compound elementsare described by data elements, either directly or through intermediate compound elements. Compoundelements represent higher-level concepts that cannot be represented by individual data elements. Theform for the definition of compound elements is:

Compound element name -- definition.Type: compoundShort Name:

The type of "compound" uniquely identifies the compound elements in the lists of terms and definitions.

Short names consisting of eight alphabetic characters or less are included to assist in implementation ofthe standard.

Data Elements

A data element is a logically primitive item of data. The entry for a data element includes the name of thedata element, the definition of the data element, a description of the values that can be assigned to the dataelement, and a short name for the data element. The form for the definition of the data elements is:


viii

Data element name -- definition.Type:Domain:Short Name:

The information about the values for the data elements include a description of the type of the value, and adescription of the domain of the valid values. The type of the data element describes the kind of value tobe provided. The choices are "integer" for integer numbers, "real" for real numbers, "text" for ASCIIcharacters, "date" for day of the year, and "time" for time of the day.

The domain describes valid values that can be assigned to the data element. The domain may specify alist of valid values, references to lists of valid values, or restrictions on the range of values that can beassigned to a data element.

The domain also may note that the domain is free from restrictions, and any values that can berepresented by the "type" of the data element can be assigned. These unrestricted domains are representedby the use of the word "free" followed by the type of the data element (that is, free text, free date, free real,free time, free integer). Some domains can be partly, but not completely, specified. For example, thereare several widely used data transfer formats, but there may be many more that are less well known. Toallow a producer to describe its data in these circumstances, the convention of providing a list of valuesfollowed by the designation of a "free" domain was used. In these cases, assignments of values shall bemade from the provided domain when possible. When not possible, providers may create and assign theirown value. A created value shall not redefine a value provided by the standard.

Short names consisting of eight alphabetic characters or less are included to assist in user implementationof the standard.

Another issue is the representation of null values (representing such concepts as "unknown") in thedomain. While this is relatively simple for textual entries (one would enter the text "Unknown"), it is notas simple for the integer, real, date, and time types. (For example, which integer value means"unknown"?). Because conventions for providing this information vary among implementations, thestandard specifies what concepts shall be represented, but does not mandate a means for representingthem.

In addition to the values to be represented, the form of representation also is important, especially toapplications that will manipulate the data elements. The following conventions for forms of values fordata elements shall be used:

Calendar Dates (Years, Months, and Days)

C A.D. Era to December 31, 9999 A.D. -- Values for day and month of year, and for years, shallfollow the calendar date convention (general forms of YYYY for years; YYYYMM for month of ayear (with month being expressed as an integer), and YYYYMMDD for a day of the year) specifiedin American National Standards Institute, 1986, Representation for calendar date and ordinal datefor information interchange (ANSI X3.30-1985): New York, American National StandardsInstitute (adopted as Federal Information Processing Standard 4-1).

C B.C. Era to 9999 B.C. -- Values for day and month of year, and for years, shall follow the calendar


ix

date convention, preceded by the lower case letters "bc" (general forms of bcYYYY for years;bcYYYYMM for month of a year (with month being expressed as an integer), andbcYYYYMMDD for a day of the year).

C B.C. Era before 9999 B.C. -- Values for the year shall consist of as many numeric characters asneeded to represent the number of the year B.C., preceded by lower case letters "cc" (general formof ccYYYYYYY...).

C A.D. Era after 9999 A.D. -- Values for the year shall consist of as many numeric characters asneeded to represent number of the year A.D., preceded by the lower case letters "cd" (general formof cdYYYYYYY...).

Time of Day (Hours, Minutes, and Seconds)

C Because some geospatial data and related applications are sensitive to time of day information,three conventions are permitted. Only one convention shall be used for metadata for a data set. The conventions are:

- Local Time. For producers who wish to record time in local time, values shall follow the 24-hour timekeeping system for local time of day in the hours, minutes, seconds, and decimalfractions of a second (to the precision desired) without separators convention (general formof HHMMSSSS) specified in American National Standards Institute, 1986, Representationsof local time of day for information interchange (ANSI X3.43-1986): New York, AmericanNational Standards Institute.

- Local Time with Time Differential Factor. For producers who wish to record time in localtime and the relationship to Universal Time (Greenwich Mean Time), values shall follow the24-hour timekeeping system for local time of day in hours, minutes, seconds, and decimalfractions of a second (to the resolution desired) without separators convention. This valueshall be followed, without separators, by the time differential factor. The time differentialfactor expresses the difference in hours and minutes between local time and Universal Time. It is represented by a four-digit number preceded by a plus sign (+) or minus sign (-),indicating hours and minutes local time is ahead of or behind Universal Time, respectively. The general form is HHMMSSSSshhmm, where HHMMSSSS is the local time using 24-hour timekeeping (expressed to the precision desired), 's' is the plus or minus sign for thetime differential factor, and hhmm is the time differential factor. (This option allowsproducers to record local time and time zone information. For example, Eastern StandardTime has a time differential factor of -0500, Central Standard Time has a time differentialfactor of -0600, Eastern Daylight Time has a time differential factor of -0400, and CentralDaylight Time has a time differential factor of -0500.) This option is specified in AmericanNational Standards Institute, 1975, Representations of universal time, local timedifferentials, and United States time zone reference for information interchange (ANSIX3.51-1975): New York, American National Standards Institute.

- Universal Time (Greenwich Mean Time). For producers who wish to record time inUniversal Time (Greenwich Mean Time), values shall follow the 24-hour timekeepingsystem for Universal Time of day in hours, minutes, seconds, and decimal fractions of asecond (expressed to the precision desired) without separators convention, with the uppercase letter "Z" directly following the low-order (or extreme right hand) time element of the24-hour clock time expression. The general form is HHMMSSSSZ, where HHMMSSSS is


x

Universal Time using 24-hour timekeeping, and Z is the letter "Z". This option is specifiedin American National Standards Institute, 1975, Representations of universal time, localtime differentials, and United States time zone reference for information interchange (ANSIX3.51-1975): New York, American National Standards Institute.

Latitude and Longitude

C Values for latitude and longitude shall be expressed as decimal fractions of degrees. Whole degreesof latitude shall be represented by a two-digit decimal number ranging from 0 through 90. Wholedegrees of longitude shall be represented by a three-digit decimal number ranging from 0 through180. When a decimal fraction of a degree is specified, it shall be separated from the whole numberof degrees by a decimal point. Decimal fractions of a degree may be expressed to the precisiondesired.

- Latitudes north of the equator shall be specified by a plus sign (+), or by the absence of aminus sign (-), preceding the two digits designating degrees. Latitudes south of the Equatorshall be designated by a minus sign (-) preceding the two digits designating degrees. A pointon the Equator shall be assigned to the Northern Hemisphere.

- Longitudes east of the prime meridian shall be specified by a plus sign (+), or by the absenceof a minus sign (-), preceding the three digits designating degrees of longitude. Longitudeswest of the meridian shall be designated by minus sign (-) preceding the three digitsdesignating degrees. A point on the prime meridian shall be assigned to the EasternHemisphere. A point on the 180th meridian shall be assigned to the Western Hemisphere. One exception to this last convention is permitted. For the special condition of describing aband of latitude around the earth, the East Bounding Coordinate data element shall beassigned the value +180 (180) degrees.

- Any spatial address with a latitude of +90 (90) or -90 degrees will specify the position at theNorth or South Pole, respectively. The component for longitude may have any legal value.

With the exception of the special condition described above, this form is specified in AmericanNational Standards Institute, 1986, Representations of Geographic Point Locations for InformationInterchange (ANSI X3.61-1986): New York, American National Standards Institute.

Network Addresses and File Names

Values for file names, network addresses for computer systems, and related services should follow theUniform Resource Locator convention of the Internet when possible. Seehttp://www.ncsa.uiuc.edu/demoweb/url-primer.html for additional details about the Uniform ResourceLocator.

Optionality

The standard categorizes elements as being mandatory, mandatory-if-applicable, or optional as follows:

C Mandatory elements must be provided. C Mandatory-if-applicable elements must be provided if the data set exhibits the defined

characteristic. C Optional elements are provided at the discretion of the metadata producer.


xi

The optionality of a section or compound element always takes precedence over the elements that itcontains. Once a section or compound element is recognized by the data set producer as applicable, thenthe optionality of its subordinate elements is to be interpreted. See Production Rules section for additionalinterpretive guidance.

Mandatory sections in the standard have some elements that are always required for all types of geospatialdata sets. For comparison with other metadata standards, these elements are referred to as “core”elements. Production Rules

A production rule specifies the relationship between a compound element, and data elements and other(lower-level) compound elements. Each production rule has a left side (identifier) and a right side(expression) connected by the symbol "=", meaning that the term on the left side is replaced by orproduces the term on the right side. Terms on the right side are either other compound elements orindividual data elements. By making substitutions using matching terms in the production rules, one canexplain higher-level concepts using data elements. The symbols used in the production rules have thefollowing meaning:

Symbol Meaning= is replaced by, produces, consists of+ and[|] selection - select one term from the list of enclosed terms (exclusive or).

Terms are separated by "|"m{}n iteration - the term(s) enclosed is(are) repeated from "m" to "n" times() optional - the term(s) enclosed is(are) optional

Examples:

a = b + c "a consists of b and c"a = [b | c "a consists of one of b or c"

a = 4{b}6 "a consists of four to six occurrences of b"

a = b + (c) "a consists of b and optionally c"

Interpreting the production rules:

The terms bounded by parentheses, "(" and ")", are optional and are provided at thediscretion of the data producer. If a producer chooses to provide information enclosed byparentheses, the producer shall follow the production rules for the enclosed information. Forexample, if the producer decides to provide the optional information described in the term:

(a + b + c)

the producer shall provide a and b and c.

Only for terms bounded by parentheses does the producer have the discretion of deciding


xii

whether or not to provide the information.

The variation among the ways in which geospatial data are produced and distributed, the factthat all geospatial data does not have the same characteristics, and the issue that all details ofdata sets that are in work or are planned may not be decided, caused the need to express theconcept of "mandatory if applicable." This concept means that if the data set exhibits (or, fordata sets that are in work or planned, it is known that the data set will exhibit) a definedcharacteristic, then the producer shall provide the information needed to describe thatcharacteristic. This concept is described by the production rule:

0{ term }1

Extensibility

Extended elements may be defined by a data set producer or a user community. Extended elementsare elements outside the standard, but needed by the data set producer. If extended elements arecreated, they must follow the guidelines in Appendix D, Guidelines for creating extended elementsto the Content Standard for Digital Geospatial Metadata.


1

Metadata

0 Metadata -- data about the content, quality, condition, and other characteristics of data.Type: compoundShort Name: metadata

Metadata = Identification_Information +0{Data_Quality_Information}1 +0{Spatial_Data_Organization_Information}1 +0{Spatial_Reference_Information}1 +0{Entity_and_Attribute_Information}1 +0{Distribution_Information}n +Metadata_Reference_Information

(Sections 1 through 7 define the terms on the right side of the production rule.)


2

Identification Information

1 Identification Information -- basic information about the data set.Type: compoundShort Name: idinfo

Identification_Information = Citation +Description +Time_Period_of_Content +Status +Spatial_Domain +Keywords +Access_Constraints +Use_Constraints +(Point_of_Contact) +(1{Browse_Graphic}n) +(Data_Set_Credit) +(Security_Information) +(Native_Data_Set_Environment) +(1{Cross_Reference}n)

Citation =Citation_Information (see section 8 for production rules)

Description =Abstract +Purpose +(Supplemental_Information)

Time_Period_of_Content =Time_Period_Information (see section 9 for production rules) +Currentness_Reference

Status = Progress +Maintenance_and_Update_Frequency

Spatial_Domain =Bounding_Coordinates +(1{Data_Set_G-Polygon}n)

Bounding_Coordinates = West_Bounding_Coordinate +East_Bounding_Coordinate +North_Bounding_Coordinate +South_Bounding_Coordinate

Data_Set_G-Polygon = Data_Set_G-Polygon_Outer_G-Ring +


3

0{Data_Set_G-Polygon_Exclusion_G-Ring}n

Data_Set_G-Polygon_Outer_G-Ring =[4{G-Ring_Point}n | G-Ring]

Data_Set_G-Polygon_Exclusion_G-Ring =[4{G-Ring_Point}n | G-Ring]

G-Ring_Point =G-Ring_Latitude +G-Ring_Longitude

Keywords =1{Theme}n +0{Place}n +0{Stratum}n +0{Temporal}n

Theme =Theme_Keyword_Thesaurus + 1{Theme_Keyword}n

Place =Place_Keyword_Thesaurus +1{Place_Keyword}n

Stratum =Stratum_Keyword_Thesaurus +1{Stratum_Keyword}n

Temporal =Temporal_Keyword_Thesaurus +1{Temporal_Keyword}n

Point_of_Contact =Contact_Information (see section 10 for production rules)

Browse_Graphic = Browse_Graphic_File_Name +Browse_Graphic_File_Description +Browse_Graphic_File_Type

Security_Information =Security_Classification_System +Security_Classification +Security_Handling_Description

Cross_Reference =Citation_Information (see section 8 for production rules)


4

1.1 Citation -- information to be used to reference the data set.Type: compoundShort Name: citation

1.2 Description -- a characterization of the data set, including its intended use and limitations.Type: compoundShort Name: descript

1.2.1 Abstract -- a brief narrative summary of the data set.Type: textDomain: free textShort Name: abstract

1.2.2 Purpose -- a summary of the intentions with which the data set was developed.Type: textDomain: free text Short Name: purpose

1.2.3 Supplemental Information -- other descriptive information about the data set.Type: textDomain: free text Short Name: supplinf

1.3 Time Period of Content -- time period(s) for which the data set corresponds to the currentnessreference.

Type: compoundShort Name: timeperd

1.3.1 Currentness Reference -- the basis on which the time period of content information isdetermined.

Type: textDomain: "ground condition" "publication date" free textShort Name: current

1.4 Status -- the state of and maintenance information for the data set.Type: compoundShort Name: status

1.4.1 Progress -- the state of the data set.Type: textDomain: "Complete" "In work" "Planned" Short Name: progress

1.4.2 Maintenance and Update Frequency -- the frequency with which changes and additions aremade to the data set after the initial data set is completed.

Type: textDomain: "Continually" "Daily" "Weekly" "Monthly" "Annually" "Unknown" "Asneeded" "Irregular" "None planned" free textShort Name: update


5

1.5 Spatial Domain - the geographic areal domain of the data set.Type: compoundShort Name: spdom

1.5.1 Bounding Coordinates - the limits of coverage of a data set expressed by latitude andlongitude values in the order western-most, eastern-most, northern-most, and southern-most. For data sets that include a complete band of latitude around the earth, the West BoundingCoordinate shall be assigned the value -180.0, and the East Bounding Coordinate shall beassigned the value 180.0

Type: compoundShort Name: bounding

1.5.1.1 West Bounding Coordinate -- western-most coordinate of the limit of coverageexpressed in longitude.

Type: realDomain: -180.0 <= West Bounding Coordinate < 180.0Short Name: westbc

1.5.1.2 East Bounding Coordinate -- eastern-most coordinate of the limit of coverageexpressed in longitude.

Type: realDomain: -180.0 <= East Bounding Coordinate <= 180.0Short Name: eastbc

1.5.1.3 North Bounding Coordinate -- northern-most coordinate of the limit of coverageexpressed in latitude.

Type: realDomain: -90.0 <= North Bounding Coordinate <= 90.0;

North Bounding Coordinate >= South Bounding CoordinateShort Name: northbc

1.5.1.4 South Bounding Coordinate -- southern-most coordinate of the limit of coverageexpressed in latitude.

Type: realDomain: -90.0 <= South Bounding Coordinate <= 90.0;

South Bounding Coordinate <= North Bounding CoordinateShort Name: southbc

1.5.2 Data Set G-Polygon -- coordinates defining the outline of an area covered by a data set.Type: compoundShort Name: dsgpoly

1.5.2.1 Data Set G-Polygon Outer G-Ring -- the closed nonintersecting boundary of aninterior area.

Type: compoundShort Name: dsgpolyo

1.5.2.1.1 G-Ring Point -- a single geographic location.Type: compoundShort Name: grngpoin


6

1.5.2.1.1.1 G-Ring Latitude -- the latitude of a point of the g-ring.Type: realDomain: -90.0 <= G-Ring Latitude <= 90.0Short Name: gringlat

1.5.2.1.1.2 G-Ring Longitude -- the longitude of a point of the g-ring.Type: realDomain: -180.0 <= G-Ring Longitude < 180.0Short Name: gringlon

1.5.2.1.2 G-Ring -- a set of ordered pairs of floating-point numbers, separated bycommas, in which the first number in each pair is the longitude of a point andthe second is the latitude of the point. Longitude and latitude are specified indecimal degrees with north latitudes positive and south negative, east longitudepositive and west negative

Type: textDomain: -90<= Latitude_elements <= 90,

-180 <= Longitude_Elements = 180Short Name: gring

1.5.2.2 Data Set G-Polygon Exclusion G-Ring -- the closed nonintersecting boundary of avoid area (or “hole” in an interior area).

Type: compoundShort Name: dsgpolyx

1.6 Keywords -- words or phrases summarizing an aspect of the data set.Type: compoundShort Name: keywords

1.6.1 Theme -- subjects covered by the data set (for a list of some commonly-used thesauri, seePart IV: Subject/index term sources in Network Development and MARC Standards Office,1988, USMARC code list for relators, sources, and description conventions: Washington,Library of Congress).

Type: compoundShort Name: theme

1.6.1.1 Theme Keyword Thesaurus -- reference to a formally registered thesaurus or a similarauthoritative source of theme keywords.

Type: textDomain: "None" free textShort Name: themekt

1.6.1.2 Theme Keyword -- common-use word or phrase used to describe the subject of thedata set.

Type: textDomain: free textShort Name: themekey

1.6.2 Place -- geographic locations characterized by the data set.Type: compound


7

Short Name: place

1.6.2.1 Place Keyword Thesaurus -- reference to a formally registered thesaurus or a similarauthoritative source of place keywords.

Type: textDomain: "None" "Geographic Names Information System" free textShort Name: placekt

1.6.2.2 Place Keyword -- the geographic name of a location covered by a data set.Type: textDomain: free textShort Name: placekey

1.6.3 Stratum -- layered, vertical locations characterized by the data set.Type: compoundShort Name: stratum

1.6.3.1 Stratum Keyword Thesaurus -- reference to a formally registered thesaurus or asimilar authoritative source of stratum keywords.

Type: textDomain: "None" free textShort Name: stratkt

1.6.3.2 Stratum Keyword -- the name of a vertical location used to describe the locationscovered by a data set.

Type: textDomain: free textShort Name: stratkey

1.6.4 Temporal -- time period(s) characterized by the data set.Type: compoundShort Name: temporal

1.6.4.1 Temporal Keyword Thesaurus -- reference to a formally registered thesaurus or asimilar authoritative source of temporal keywords.

Type: textDomain: "None" free textShort Name: tempkt

1.6.4.2 Temporal Keyword -- the name of a time period covered by a data set.Type: textDomain: free textShort Name: tempkey

1.7 Access Constraints -- restrictions and legal prerequisites for accessing the data set. These includeany access constraints applied to assure the protection of privacy or intellectual property, and anyspecial restrictions or limitations on obtaining the data set.

Type: textDomain: "None" free textShort Name: accconst


8

1.8 Use Constraints -- restrictions and legal prerequisites for using the data set after access is granted. These include any use constraints applied to assure the protection of privacy or intellectualproperty, and any special restrictions or limitations on using the data set.

Type: textDomain: "None" free textShort Name: useconst

1.9 Point of Contact -- contact information for an individual or organization that is knowledgeableabout the data set.

Type: compoundShort Name: ptcontac

1.10 Browse Graphic -- a graphic that provides an illustration of the data set. The graphic shouldinclude a legend for interpreting the graphic.

Type: compoundShort Name: browse

1.10.1 Browse Graphic File Name -- name of a related graphic file that provides an illustration ofthe data set.

Type: textDomain: free textShort Name: browsen

1.10.2 Browse Graphic File Description -- a text description of the illustration.Type: textDomain: free textShort Name: browsed

1.10.3 Browse Graphic File Type -- graphic file type of a related graphic file.Type: textDomain: domain values in the table below; free textShort Name: browset

DomainValue Definition"CGM" Computer Graphics Metafile"EPS" Encapsulated Postscript format“EMF” Enhanced Metafile"GIF" Graphic Interchange Format"JPEG" Joint Photographic Experts Group format"PBM" Portable Bit Map format "PS" Postscript format"TIFF" Tagged Image File Format“WMF” Windows metafile"XWD" X-Windows Dump

1.11 Data Set Credit -- recognition of those who contributed to the data set.Type: textDomain: free textShort Name: datacred


9

1.12 Security Information -- handling restrictions imposed on the data set because of national security,privacy, or other concerns.

Type: compoundShort Name: secinfo

1.12.1 Security Classification System -- name of the classification system.Type: textDomain: free textShort Name: secsys

1.12.2 Security Classification -- name of the handling restrictions on the data set.Type: textDomain: "Top secret" "Secret" "Confidential" "Restricted" "Unclassified" "Sensitive"free textShort Name: secclass

1.12.3 Security Handling Description -- additional information about the restrictions on handlingthe data set.

Type: textDomain: free textShort Name: sechandl

1.13 Native Data Set Environment -- a description of the data set in the producer's processingenvironment, including items such as the name of the software (including version), thecomputer operating system, file name (including host-, path-, and filenames), and the data set size.

Type: textDomain: free textShort Name: native

1.14 Cross Reference -- information about other, related data sets that are likely to be of interest.Type: compoundShort Name: crossref


10

Data Quality Information

2 Data Quality Information -- a general assessment of the quality of the data set. (Recommendationson information to be reported and tests to be performed are found in "Spatial Data Quality," whichis chapter 3 of part 1 in Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS)(Federal Information Processing Standard 173): Washington, Department of Commerce, NationalInstitute of Standards and Technology.)

Type: compoundShort Name: dataqual

Data_Quality_Information = 0{Attribute_Accuracy}1 +Logical_Consistency_Report +Completeness_Report +0{Positional_Accuracy}1 +Lineage +(Cloud_Cover)

Attribute_Accuracy =Attribute_Accuracy_Report +(1{Quantitative_Attribute_Accuracy_Assessment}n)

Quantitative_Attribute_Accuracy_Assessment =Attribute_Accuracy_Value + Attribute_Accuracy_Explanation

Positional_Accuracy =0{Horizontal_Positional_Accuracy}1 +0{Vertical_Positional_Accuracy}1

Horizontal_Positional_Accuracy = Horizontal_Positional_Accuracy_Report +(1{Quantitative_Horizontal_Positional_Accuracy_Assessment}n)

Quantitative_Horizontal_Positional_Accuracy_Assessment =Horizontal_Positional_Accuracy_Value +Horizontal_Positional_Accuracy_Explanation

Vertical_Positional_Accuracy =Vertical_Positional_Accuracy_Report +(1{Quantitative_Vertical_Positional_Accuracy_Assessment}n)

Quantitative_Vertical_Positional_Accuracy_Assessment =Vertical_Positional_Accuracy_Value +Vertical_Positional_Accuracy_Explanation

Lineage =0{Source_Information}n +1{Process_Step}nSource_Information =


11

Source_Citation +0{Source_Scale_Denominator}1 +Type_of_Source_Media +Source_Time_Period_of_Content +Source_Citation_Abbreviation +Source_Contribution

Source_Citation =Citation_Information (see section 8 for production rules)

Source_Time_Period_of_Content =Time_Period_Information (see section 9 for production rules) +Source_Currentness_Reference

Process_Step = Process_Description +0{Source_Used_Citation_Abbreviation}n +Process_Date +(Process_Time) +0{Source_Produced_Citation_Abbreviation}n +(Process_Contact)

Process_Contact =Contact_Information (see section 10 for production rules)

2.1 Attribute Accuracy -- an assessment of the accuracy of the identification of entities and assignmentof attribute values in the data set.

Type: compoundShort Name: attracc

2.1.1 Attribute Accuracy Report -- an explanation of the accuracy of the identification of theentities and assignments of values in the data set and a description of the tests used.

Type: textDomain: free textShort Name: attraccr

2.1.2 Quantitative Attribute Accuracy Assessment -- a value assigned to summarize the accuracyof the identification of the entities and assignments of values in the data set and theidentification of the test that yielded the value.

Type: compoundShort Name: qattracc

2.1.2.1 Attribute Accuracy Value -- an estimate of the accuracy of the identification of theentities and assignments of attribute values in the data set.

Type: textDomain: "Unknown" free textShort Name: attraccv

2.1.2.2 Attribute Accuracy Explanation -- the identification of the test that yielded theAttribute Accuracy Value.


12

Type: textDomain: free textShort Name: attracce

2.2 Logical Consistency Report -- an explanation of the fidelity of relationships in the data set and testsused.

Type: textDomain: free textShort Name: logic

2.3 Completeness Report -- information about omissions, selection criteria, generalization, definitionsused, and other rules used to derive the data set.

Type: textDomain: free textShort Name: complete

2.4 Positional Accuracy -- an assessment of the accuracy of the positions of spatial objects.Type: compoundShort Name: posacc

2.4.1 Horizontal Positional Accuracy -- an estimate of accuracy of the horizontal positions of thespatial objects.

Type: compoundShort Name: horizpa

2.4.1.1 Horizontal Positional Accuracy Report -- an explanation of the accuracy of thehorizontal coordinate measurements and a description of the tests used.

Type: textDomain: free textShort Name: horizpar

2.4.1.2 Quantitative Horizontal Positional Accuracy Assessment -- numeric value assigned tosummarize the accuracy of the horizontal coordinate measurements and theidentification of the test that yielded the value.

Type: compoundShort Name: qhorizpa

2.4.1.2.1 Horizontal Positional Accuracy Value -- an estimate of the accuracy of thehorizontal coordinate measurements in the data set expressed in (ground)meters.

Type: realDomain: free realShort Name: horizpav

2.4.1.2.2 Horizontal Positional Accuracy Explanation -- the identification of the test thatyielded the Horizontal Positional Accuracy Value.

Type: textDomain: free textShort Name: horizpae


13

2.4.2 Vertical Positional Accuracy -- an estimate of accuracy of the vertical positions in the dataset.

Type: compoundShort Name: vertacc

2.4.2.1 Vertical Positional Accuracy Report -- an explanation of the accuracy of the verticalcoordinate measurements and a description of the tests used.

Type: textDomain: free textShort Name: vertaccr

2.4.2.2 Quantitative Vertical Positional Accuracy Assessment -- numeric value assigned tosummarize the accuracy of vertical coordinate measurements and the identification ofthe test that yielded the value.

Type: compoundShort Name: qvertpa

2.4.2.2.1 Vertical Positional Accuracy Value -- an estimate of the accuracy of the verticalcoordinate measurements in the data set expressed in (ground) meters.

Type: realDomain: free realShort Name: vertaccv

2.4.2.2.2 Vertical Positional Accuracy Explanation -- the identification of the test thatyielded the Vertical Positional Accuracy Value.

Type: textDomain: free textShort Name: vertacce

2.5 Lineage -- information about the events, parameters, and source data which constructed the dataset, and information about the responsible parties.

Type: compoundShort Name: lineage

2.5.1 Source Information -- list of sources and a short discussion of the information contributed byeach.

Type: compoundShort Name: srcinfo

2.5.1.1 Source Citation -- reference for a source data set.Type: compoundShort Name: srccite

2.5.1.2 Source Scale Denominator -- the denominator of the representative fraction on a map(for example, on a 1:24,000-scale map, the Source Scale Denominator is 24000).

Type: integerDomain: Source Scale Denominator > 1Short Name: srcscale

2.5.1.3 Type of Source Media -- the medium of the source data set.


14

Type: textDomain: "paper" "stable-base material" "microfiche" "microfilm""audiocassette" "chart" "filmstrip" "transparency" "videocassette" "videodisc""videotape" "physical model" "computer program" "disc" "cartridge tape" "magnetic tape" "online" "CD-ROM" "electronic bulletin board" "electronicmail system" free textShort Name: typesrc

2.5.1.4 Source Time Period of Content -- time period(s) for which the source data setcorresponds to the ground.

Type: compoundShort Name: srctime

2.5.1.4.1 Source Currentness Reference -- the basis on which the source time period ofcontent information of the source data set is determined.

Type: textDomain: "ground condition" "publication date" free textShort Name: srccurr

2.5.1.5 Source Citation Abbreviation -- short-form alias for the source citation.Type: textDomain: free textShort Name: srccitea

2.5.1.6 Source Contribution -- brief statement identifying the information contributed by thesource to the data set.

Type: textDomain: free textShort Name: srccontr

2.5.2 Process Step -- information about a single event.Type: compoundShort Name: procstep

2.5.2.1 Process Description -- an explanation of the event and related parameters ortolerances.

Type: textDomain: free textShort Name: procdesc

2.5.2.2 Source Used Citation Abbreviation -- the Source Citation Abbreviation of a data setused in the processing step.

Type: textDomain: Source Citation Abbreviations from the Source Information entriesfor the data set.Short Name: srcused

2.5.2.3 Process Date -- the date when the event was completed.Type: dateDomain: "Unknown" "Not complete" free date


15

Short Name: procdate

2.5.2.4 Process Time -- the time when the event was completed.Type: timeDomain: free timeShort Name: proctime

2.5.2.5 Source Produced Citation Abbreviation -- the Source Citation Abbreviation of anintermediate data set that (1) is significant in the opinion of the data producer, (2) isgenerated in the processing step, and (3) is used in later processing steps.

Type: textDomain: Source Citation Abbreviations from the Source Information entriesfor the data set.Short Name: srcprod

2.5.2.6 Process Contact -- the party responsible for the processing step information.Type: compoundShort Name: proccont

2.6 Cloud Cover -- area of a data set obstructed by clouds, expressed as a percentage of the spatialextent.

Type: integerDomain: 0 <= Cloud Cover <= 100 "Unknown"Short Name: cloud


16

Spatial Data Organization Information

3 Spatial Data Organization Information -- the mechanism used to represent spatial information inthe data set.

Type: compoundShort Name: spdoinfo

Spatial_Data_Organization_Information = 0{Indirect_Spatial_Reference}1 +0{Direct_Spatial_Reference_Method +

( [Point_and_Vector_Object_Information |Raster_Object_Information] )}1

Point_and_Vector_Object_Information =[1{SDTS_Terms_Description}n |VPF_Terms_Description]

SDTS_Terms_Description =SDTS_Point_and_Vector_Object_Type +

(Point_and_Vector_Object_Count)

VPF_Terms_Description =VPF_Topology_Level +1{VPF_Point_and_Vector_Object_Information}n

VPF_Point_and_Vector_Object_Information =VPF_Point_and_Vector_Object_Type +

(Point_and_Vector_Object_Count)

Raster_Object_Information = Raster_Object_Type +

(Row_Count +Column_Count +0{Vertical_Count}1 )

3.1 Indirect Spatial Reference -- name of types of geographic features, addressing schemes, or othermeans through which locations are referenced in the data set.

Type: textDomain: free textShort Name: indspref

3.2 Direct Spatial Reference Method -- the system of objects used to represent space in the data set.Type: textDomain: "Point" "Vector" "Raster"Short Name: direct

3.3 Point and Vector Object Information -- the types and numbers of vector or nongridded point spatialobjects in the data set.

Type: compoundShort Name: ptvctinf


17

3.3.1 SDTS Terms Description -- point and vector object information using the terminology andconcepts from "Spatial Data Concepts," which is Chapter 2 of Part 1 in Department ofCommerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information ProcessingStandard 173): Washington, Department of Commerce, National Institute of Standards andTechnology. (Note that this reference to the SDTS is used ONLY to provide a set ofterminology for the point and vector objects.)

Type: compoundShort Name: sdtsterm

3.3.1.1 SDTS Point and Vector Object Type -- name of point and vector spatial objects usedto locate zero-, one-, and two-dimensional spatial locations in the data set.

Type: textDomain: (The domain is from "Spatial Data Concepts," which is Chapter 2 ofPart 1 in Department of Commerce, 1992, Spatial Data Transfer Standard(SDTS) (Federal Information Processing Standard 173): Washington,Department of Commerce, National Institute of Standards and Technology):

"Point" "Entity point" "Label point" "Area point" "Node, planar graph""Node, network" "String" "Link" "Complete chain" "Area chain""Network chain, planar graph" "Network chain, nonplanar graph""Circular arc, three point center" "Elliptical arc" "Uniform B-spline""Piecewise Bezier" "Ring with mixed composition""Ring composed of strings" "Ring composed of chains""Ring composed of arcs" "G-polygon" "GT-polygon composed of rings""GT-polygon composed of chains""Universe polygon composed of rings""Universe polygon composed of chains""Void polygon composed of rings" "Void polygon composed of chains"

Short Name: sdtstype

3.3.1.2 Point and Vector Object Count -- the total number of the point or vector object typeoccurring in the data set.

Type: integerDomain: Point and Vector Object Count > 0Short Name: ptvctcnt

3.3.2 VPF Terms Description -- point and vector object information using the terminology andconcepts from Department of Defense, 1992, Vector Product Format (MIL-STD-600006): Philadelphia, Department of Defense, Defense Printing Service Detachment Office. (Notethat this reference to the VPF is used ONLY to provide a set of terminology for the point andvector objects.)

Type: compoundShort Name: vpfterm

3.3.2.1 VPF Topology Level -- the completeness of the topology carried by the data set. Thelevels of completeness are defined in Department of Defense, 1992, Vector ProductFormat (MIL-STD-600006): Philadelphia, Department of Defense, Defense PrintingService Detachment Office.

Type: integerDomain: 0 <= VPF Topology Level <= 3Short Name: vpflevel


18

3.3.2.2 VPF Point and Vector Object Information -- information about VPF point and vectorobjects

Type: compoundShort Name: vpfinfo

3.3.2.2.1 VPF Point and Vector Object Type -- name of point and vector spatial objectsused to locate zero-, one-, and two-dimensional spatial locations in the data set.

Type: textDomain: (The domain is from Department of Defense, 1992, VectorProduct Format (MIL-STD-600006): Philadelphia, Department ofDefense, Defense Printing Service Detachment Office):

"Node" "Edge" "Face" "Text"Short Name: vpftype

3.4 Raster Object Information -- the types and numbers of raster spatial objects in the data set.Type: compoundShort Name: rastinfo

3.4.1 Raster Object Type -- raster spatial objects used to locate zero-, two-, or three-dimensionallocations in the data set.

Type: textDomain: (With the exception of "voxel", the domain is from "Spatial Data Concepts,"which is chapter 2 of part 1 in Department of Commerce, 1992, Spatial Data TransferStandard (SDTS) (Federal Information Processing Standard 173): Washington,Department of Commerce, National Institute of Standards and Technology):

"Point" "Pixel" "Grid Cell" "Voxel"Short Name: rasttype

3.4.2 Row Count -- the maximum number of raster objects along the ordinate (y) axis. For usewith rectangular raster objects.

Type: IntegerDomain: Row Count > 0Short Name: rowcount

3.4.3 Column Count -- the maximum number of raster objects along the abscissa (x) axis. For usewith rectangular raster objects.

Type: IntegerDomain: Column Count > 0Short Name: colcount

3.4.4 Vertical Count -- the maximum number of raster objects along the vertical (z) axis. For usewith rectangular volumetric raster objects (voxels).

Type: IntegerDomain: Depth Count > 0Short Name: vrtcount


19

Spatial Reference Information

4 Spatial Reference Information -- the description of the reference frame for, and the means toencode, coordinates in the data set.

Type: compoundShort Name: spref

Spatial_Reference_Information = 0{Horizontal_Coordinate_System_Definition}1 +0{Vertical_Coordinate_System_Definition}1

Horizontal_Coordinate_System_Definition =[Geographic |

1{Planar}n |Local] +

0{Geodetic_Model}1

Geographic =Latitude_Resolution +Longitude_Resolution +Geographic_Coordinate_Units

Planar =[Map_Projection |

Grid_Coordinate_System |Local_Planar] +

Planar_Coordinate_Information

Map_Projection =Map_Projection_Name +[Albers_Conical_Equal_Area |

Azimuthal_Equidistant |Equidistant_Conic |Equirectangular |General_Vertical_Near-sided_Perspective |Gnomonic |Lambert_Azimuthal_Equal_Area |Lambert_Conformal_Conic |Mercator |Modified_Stereographic_for_Alaska |Miller_Cylindrical |Oblique_Mercator |Orthographic |Polar_Stereographic |Polyconic |Robinson |Sinusoidal |Space_Oblique_Mercator_(Landsat) |Stereographic |Transverse Mercator |


20

van_der_Grinten |Map_Projection_Parameters]

Albers_Conical_Equal_Area =1{Standard_Parallel}2 +Longitude_of_Central_Meridian +Latitude_of_Projection_Origin +False_Easting +False_Northing

Azimuthal_Equidistant =Longitude_of_Central_Meridian +Latitude_of_Projection_Origin +False_Easting +False_Northing

Equidistant_Conic =1{Standard_Parallel}2 +Longitude_of_Central_Meridian +Latitude_of_Projection_Origin +False_Easting +False_Northing

Equirectangular =Standard_Parallel +Longitude_of_Central_Meridian +False_Easting +False_Northing

General_Vertical_Near-sided_Perspective =Height_of_Perspective_Point_Above_Surface +Longitude_of_Projection_Center +Latitude_of_Projection_Center +False_Easting +False_Northing

Gnomonic =Longitude_of_Projection_Center +Latitude_of_Projection_Center +False_Easting +False_Northing

Lambert_Azimuthal_Equal_Area =Longitude_of_Projection_Center +Latitude_of_Projection_Center +False_Easting +False_Northing

Lambert_Conformal_Conic =1{Standard_Parallel}2 +


21

Longitude_of_Central_Meridian +Latitude_of_Projection_Origin +False_Easting +False_Northing

Mercator =[Standard_Parallel |

Scale_Factor_at_Equator] +Longitude_of_Central_Meridian +False_Easting +False_Northing

Modified_Stereographic_for_Alaska =False_Easting +False_Northing

Miller_Cylindrical =Longitude_of_Central_Meridian +False_Easting +False_Northing

Oblique_Mercator =Scale_Factor_at_Center_Line +[Oblique_Line_Azimuth |

Oblique_Line_Point] +Latitude_of_Projection_Origin +False_Easting +False_Northing

Oblique_Line_Azimuth =Azimuthal_Angle +Azimuth_Measure_Point_Longitude

Oblique_Line_Point =2{Oblique_Line_Latitude +

Oblique_Line_Longitude}2

Orthographic =Longitude_of_Projection_Center +Latitude_of_Projection_Center +False_Easting +False_Northing

Polar_Stereographic =Straight-Vertical_Longitude_from_Pole +[Standard_Parallel |

Scale_Factor_at_Projection_Origin] +False_Easting +False_Northing


22

Polyconic =Longitude_of_Central_Meridian +Latitude_of_Projection_Origin +False_Easting +False_Northing

Robinson =Longitude_of_Projection_Center +False_Easting +False_Northing

Sinusoidal =Longitude_of_Central_Meridian +False_Easting +False_Northing

Space_Oblique_Mercator_(Landsat) =Landsat_Number +Path_Number +False_Easting +False_Northing

Stereographic =Longitude_of_Projection_Center +Latitude_of_Projection_Center +False_Easting +False_Northing

Transverse_Mercator =Scale_Factor_at_Central_Meridian +Longitude_of_Central_Meridian +Latitude_of_Projection_Origin +False_Easting +False_Northing

van_der_Grinten =Longitude_of_Central_Meridian +False_Easting +False_Northing

Map_Projection_Parameters =Appropriate data elements 4.1.2.1.23.1 through 4.1.2.1.23.18 todocument the map projection parameters.

Grid_Coordinate_System = Grid_Coordinate_System_Name +[Universal_Transverse_Mercator |

Universal_Polar_Stereographic |State_Plane_Coordinate_System |ARC_Coordinate_System |


23

Other_Grid_System's_Definition]

Universal_Transverse_Mercator =UTM_Zone_Number +Transverse_Mercator

Universal_Polar_Stereographic =UPS_Zone_Identifier + Polar_Stereographic

State_Plane_Coordinate_System =SPCS_Zone_Identifier +[Lambert_Conformal_Conic |

Transverse_Mercator |Oblique_Mercator |Polyconic]

ARC_Coordinate_System =ARC_System_Zone_Identifier +[Equirectangular |

Azimuthal_Equidistant]

Local_Planar =Local_Planar_Description +Local_Planar_Georeference_Information

Planar_Coordinate_Information =Planar_Coordinate_Encoding_Method +[Coordinate_Representation |

Distance_and_Bearing_Representation] +Planar_Distance_Units

Coordinate_Representation =Abscissa_Resolution +Ordinate_Resolution

Distance_and_Bearing_Representation =Distance_Resolution +Bearing_Resolution +Bearing_Units +Bearing_Reference_Direction +Bearing_Reference_Meridian

Local =Local_Description +Local_Georeference_Information

Geodetic_Model = 0{Horizontal_Datum_Name}1 +Ellipsoid_Name +


24

Semi-major_Axis +Denominator_of_Flattening_Ratio

Vertical_Coordinate_System_Definition =0{Altitude_System_Definition}1 +0{Depth_System_Definition}1

Altitude_System_Definition =Altitude_Datum_Name +1{Altitude_Resolution}n +Altitude_Distance_Units +Altitude_Encoding_Method

Depth_System_Definition =Depth_Datum_Name +1{Depth_Resolution}n +Depth_Distance_Units +Depth_Encoding_Method

4.1 Horizontal Coordinate System Definition -- the reference frame or system from which linear orangular quantities are measured and assigned to the position that a point occupies.

Type: compoundShort Name: horizsys

4.1.1 Geographic -- the quantities of latitude and longitude which define the position of a point onthe Earth's surface with respect to a reference spheroid.

Type: compoundShort Name: geograph

4.1.1.1 Latitude Resolution -- the minimum difference between two adjacent latitude valuesexpressed in Geographic Coordinate Units of measure.

Type: realDomain: Latitude Resolution > 0.0Short Name: latres

4.1.1.2 Longitude Resolution -- the minimum difference between two adjacent longitudevalues expressed in Geographic Coordinate Units of measure.

Type: realDomain: Longitude Resolution > 0.0Short Name: longres

4.1.1.3 Geographic Coordinate Units -- units of measure used for the latitude and longitudevalues.

Type: textDomain: "Decimal degrees" "Decimal minutes" "Decimal seconds" "Degreesand decimal minutes" "Degrees, minutes, and decimal seconds" "Radians""Grads"Short Name: geogunit

4.1.2 Planar -- the quantities of distances, or distances and angles, which define the position of a


25

point on a reference plane to which the surface of the Earth has been projected.Type: compoundShort Name: planar

4.1.2.1 Map Projection -- the systematic representation of all or part of the surface of theEarth on a plane or developable surface.

Type: compoundShort Name: mapproj

4.1.2.1.1 Map Projection Name -- name of the map projection.Type: textDomain: "Albers Conical Equal Area" "Azimuthal Equidistant""Equidistant Conic" "Equirectangular" "General Vertical Near-sidedProjection" "Gnomonic" "Lambert Azimuthal Equal Area""Lambert Conformal Conic" "Mercator" "Modified Stereographic forAlaska" "Miller Cylindrical" "Oblique Mercator" "Orthographic" "PolarStereographic" "Polyconic" "Robinson" "Sinusoidal" "Space ObliqueMercator" "Stereographic" "Transverse Mercator" "van der Grinten" free textShort Name: mapprojn

4.1.2.1.2 Albers Conical Equal Area -- contains parameters for the Albers Conical EqualArea projection.

Type: compoundShort Name: albers

4.1.2.1.3 Azimuthal Equidistant -- contains parameters for the Azimuthal Equidistantprojection.

Type: compoundShort Name:azimequi

4.1.2.1.4 Equidistant Conic -- contains parameters for the Equidistant Conic projection.Type: compoundShort Name: equicon

4.1.2.1.5 Equirectangular -- contains parameters for the Equirectangular projection.Type: compoundShort Name: equirect

4.1.2.1.6 General Vertical Near-sided Perspective -- contains parameters for the GeneralVertical Near-sided Perspective projection.

Type: compoundShort Name: gvnsp

4.1.2.1.7 Gnomonic -- contains parameters for the Gnomonic projection. Type: compoundShort Name: gnomonic

4.1.2.1.8 Lambert Azimuthal Equal Area -- contains parameters for the LambertAzimuthal Equal Area projection.


26

Type: compoundShort Name: lamberta

4.1.2.1.9 Lambert Conformal Conic -- contains parameters for the Lambert ConformalConic projection.

Type: compoundShort Name:lambertc

4.1.2.1.10 Mercator -- contains parameters for the Mercator projectionType: compoundShort Name: mercator

4.1.2.1.11 Modified Stereographic for Alaska -- contains parameters for the ModifiedStereographic for Alaska projection.

Type: compoundShort Name: modsak

4.1.2.1.12 Miller Cylindrical -- contains parameters for the Miller Cylindrical projection.Type: compoundShort Name: miller

4.1.2.1.13 Oblique Mercator -- contains parameters for the Oblique Mercator projection.

Type: compoundShort Name: obqmerc

4.1.2.1.14 Orthographic -- contains parameters for the Orthographic projection. Type: compoundShort Name:orthogr

4.1.2.1.15 Polar Stereographic -- contains parameters for the Polar Stereographicprojection.

Type: compoundShort Name:polarst

4.1.2.1.16 Polyconic -- contains parameters for the Polyconic projection. Type: compoundShort Name:polycon

4.1.2.1.17 Robinson -- contains parameters for the Robinson projection. Type: compoundShort Name: robinson

4.1.2.1.18 Sinusoidal -- contains parameters for the Sinusoidal projection. Type: compoundShort Name: sinusoid

4.1.2.1.19 Space Oblique Mercator (Landsat) -- contains parameters for the SpaceOblique Mercator (Landsat) projection.

Type: compound


27

Short Name: spaceobq

4.1.2.1.20 Stereographic -- contains parameters for the Stereographic projection. Type: compoundShort Name: stereo

4.1.2.1.21 Transverse Mercator -- contains parameters for theTransverse mercatorprojection.

Type: compoundShort Name: transmer

4.1.2.1.22 van der Grinten -- contains parameters for the van der Grinten projection.Type: compoundShort Name: vdgrin

4.1.2.1.23 Map Projection Parameters -- a complete parameter set of the projection thatwas used for the data set. The information provided shall include the names ofthe parameters and values used for the data set that describe the mathematicalrelationship between the Earth and the plane or developable surface for theprojection.

Type: compound

4.1.2.1.23.1 Standard Parallel -- line of constant latitude at which the surface of theEarth and the plane or developable surface intersect.

Type: realDomain: -90.0 <= Standard Parallel <= 90.0Short Name: stdparll

4.1.2.1.23.2 Longitude of Central Meridian -- the line of longitude at the center of amap projection generally used as the basis for constructing theprojection.

Type: realDomain: -180.0 <= Longitude of Central Meridian < 180.0Short Name: longcm

4.1.2.1.23.3 Latitude of Projection Origin -- latitude chosen as the origin ofrectangular coordinates for a map projection.

Type: realDomain: -90.0 <= Latitude of Projection Origin <= 90.0Short Name: latprjo

4.1.2.1.23.4 False Easting -- the value added to all "x" values in the rectangularcoordinates for a map projection. This value frequently is assigned toeliminate negative numbers. Expressed in the unit of measure identifiedin Planar Coordinate Units.

Type: realDomain: free realShort Name: feast

4.1.2.1.23.5 False Northing -- the value added to all "y" values in the rectangular


28

coordinates for a map projection. This value frequently is assigned toeliminate negative numbers. Expressed in the unit of measure identifiedin Planar Coordinate Units.

Type: realDomain: free realShort Name: fnorth

4.1.2.1.23.6 Scale Factor at Equator -- a multiplier for reducing a distance obtainedfrom a map by computation or scaling to the actual distance along theequator.

Type: realDomain: Scale Factor at Equator > 0.0Short Name: sfequat

4.1.2.1.23.7 Height of Perspective Point Above Surface -- height of viewpoint abovethe Earth, expressed in meters.

Type: realDomain: Height of Perspective Point Above Surface > 0.0Short Name: heightpt

4.1.2.1.23.8 Longitude of Projection Center -- longitude of the point of projection forazimuthal projections.

Type: realDomain: -180.0 <= Longitude of Projection Center < 180.0Short Name: longpc

4.1.2.1.23.9 Latitude of Projection Center -- latitude of the point of projection forazimuthal projections.

Type: realDomain: -90.0 <= Latitude of Projection Center <= 90.0Short Name: latprjc

4.1.2.1.23.10 Scale Factor at Center Line -- a multiplier for reducing a distanceobtained from a map by computation or scaling to the actual distancealong the center line.

Type: realDomain: Scale Factor at Center Line > 0.0Short Name: sfctrlin

4.1.2.1.23.11 Oblique Line Azimuth -- method used to describe the line along whichan oblique mercator map projection is centered using the map projectionorigin and an azimuth.

Type: compoundShort Name: obqlazim

4.1.2.1.23.11.1 Azimuthal Angle -- angle measured clockwise from north, andexpressed in degrees.

Type: realDomain: 0.0 <= Azimuthal Angle < 360.0Short Name: azimangl


29

4.1.2.1.23.11.2 Azimuth Measure Point Longitude -- longitude of the mapprojection origin.

Type: realDomain: -180.0 <= Azimuth Measure Point Longitude <180.0Short Name: azimptl

4.1.2.1.23.12 Oblique Line Point -- method used to describe the line along which anoblique mercator map projection is centered using two points near thelimits of the mapped region that define the center line.

Type: compoundShort Name: obqlpt

4.1.2.1.23.12.1 Oblique Line Latitude -- latitude of a point defining the obliqueline.

Type: realDomain: -90.0 <= Oblique Line Latitude <= 90.0Short Name: obqllat

4.1.2.1.23.12.2 Oblique Line Longitude -- longitude of a point defining theoblique line.

Type: realDomain: -180.0 <= Oblique Line Longitude < 180.0Short Name: obqllong

4.1.2.1.23.13 Straight Vertical Longitude from Pole -- longitude to be oriented straightup from the North or South Pole.

Type: realDomain: -180.0 <= Straight Vertical Longitude from Pole <180.0Short Name: svlong

4.1.2.1.23.14 Scale Factor at Projection Origin -- a multiplier for reducing a distanceobtained from a map by computation or scaling to the actual distance atthe projection origin.

Type: realDomain: Scale Factor at Projection Origin > 0.0Short Name: sfprjorg

4.1.2.1.23.15 Landsat Number -- number of the Landsat satellite. (Note: This dataelement exists solely to provide a parameter needed to define the spaceoblique mercator projection. It is not used to identify data originatingfrom a remote sensing vehicle.)

Type: IntegerDomain: free integerShort Name: landsat

4.1.2.1.23.16 Path Number -- number of the orbit of the Landsat satellite. (Note: Thisdata element exists solely to provide a parameter needed to define thespace oblique mercator projection. It is not used to identify data


30

originating from a remote sensing vehicle.)Type: integerDomain: 0 < Path Number < 251 for Landsats 1, 2, or 3

0 < Path Number < 233 for Landsats 4 or 5, free integerShort Name: pathnum

4.1.2.1.23.17 Scale Factor at Central Meridian -- a multiplier for reducing a distanceobtained from a map by computation or scaling to the actual distancealong the central meridian.

Type: realDomain: Scale Factor at Central Meridian > 0.0Short Name: sfctrmer

4.1.2.1.23.18 Other Projection’s Definition -- a description of a projection, not definedelsewhere in the standard, that was used for the data set. Theinformation provided shall include the name of the projection, names ofparameters and values used for the data set, and the citation of thespecification for the algorithms that describe the mathematicalrelationship between Earth and plane or developable surface for theprojection.

Type: textDomain: free text

4.1.2.2 Grid Coordinate System -- a plane-rectangular coordinate system usually based on,and mathematically adjusted to, a map projection so that geographic positions can bereadily transformed to and from plane coordinates.

Type: compoundShort Name gridsys

4.1.2.2.1 Grid Coordinate System Name -- name of the grid coordinate system.Type: textDomain: "Universal Transverse Mercator""Universal Polar Stereographic" "State Plane Coordinate System 1927""State Plane Coordinate System 1983" "ARC Coordinate System""other grid system"Short Name: gridsysn

4.1.2.2.2 Universal Transverse Mercator (UTM) -- a grid system based on the transversemercator projection, applied between latitudes 84 degrees north and 80 degreessouth on the Earth's surface.

Type: compoundShort Name: utm

4.1.2.2.2.1 UTM Zone Number -- identifier for the UTM zone.Type: integerDomain: 1 <= UTM Zone Number <= 60 for the northernhemisphere;

-60 <= UTM Zone Number <= -1 for the southernhemisphere

Short Name: utmzone


31

4.1.2.2.3 Universal Polar Stereographic (UPS) -- a grid system based on the polarstereographic projection, applied to the Earth's polar regions north of 84degrees north and south of 80 degrees south.

Type: compoundShort Name: ups

4.1.2.2.3.1 UPS Zone Identifier -- identifier for the UPS zone.Type: textDomain: "A" "B" "Y" "Z"Short Name: upszone

4.1.2.2.4 State Plane Coordinate System (SPCS) -- a plane-rectangular coordinate systemestablished for each state in the United States by the National Geodetic Survey.

Type: compoundShort Name: spcs

4.1.2.2.4.1 SPCS Zone Identifier -- identifier for the SPCS zone.Type: textDomain: Four-digit numeric codes for the State Plane CoordinateSystems based on the North American Datum of 1927 are foundin Department of Commerce, 1986, Representation of geographicpoint locations for information interchange (Federal InformationProcessing Standard 70-1): Washington: Department ofCommerce, National Institute of Standards and Technology. Codes for the State Plane Coordinate Systems based on the NorthAmerican Datum of 1983 are found in Department of Commerce,1989 (January), State Plane Coordinate System of 1983 (NationalOceanic and Atmospheric Administration Manual NOS NGS 5): Silver Spring, Maryland, National Oceanic and AtmosphericAdministration, National Ocean Service, Coast and GeodeticSurvey.Short Name: spcszone

4.1.2.2.5 ARC Coordinate System -- the Equal Arc-second Coordinate System, a plane-rectangular coordinate system established in Department of Defense, 1990,Military specification ARC Digitized Raster Graphics (ADRG)(MIL-A-89007): Philadelphia, Department of Defense, Defense PrintingService Detachment Office.

Type: compoundShort Name: arcsys

4.1.2.2.5.1 ARC System Zone Identifier -- identifier for the ARC Coordinate SystemZone.

Type: integerDomain: 1 <= ARC System Zone Identifier <= 18Short Name: arczone

4.1.2.2.6 Other Grid System's Definition -- a complete description of a grid system, notdefined elsewhere in this standard, that was used for the data set. Theinformation provided shall include the name of the grid system, the names of


32

the parameters and values used for the data set, and the citation of thespecification for the algorithms that describe the mathematical relationshipbetween the Earth and the coordinates of the grid system.

Type: textDomain: free textShort Name: othergrd

4.1.2.3 Local Planar -- any right-handed planar coordinate system of which the z-axiscoincides with a plumb line through the origin that locally is aligned with the surfaceof the Earth.

Type: compoundShort Name: localp

4.1.2.3.1 Local Planar Description -- a description of the local planar system.Type: textDomain: free textShort Name: localpd

4.1.2.3.2 Local Planar Georeference Information -- a description of the informationprovided to register the local planar system to the Earth (e.g. control points,satellite ephemeral data, inertial navigation data).

Type: textDomain: free textShort Name: localpgi

4.1.2.4 Planar Coordinate Information -- information about the coordinate system developedon the planar surface.

Type: compoundShort Name: planci

4.1.2.4.1 Planar Coordinate Encoding Method -- the means used to represent horizontalpositions.

Type: textDomain: "coordinate pair" "distance and bearing" "row and column"Short Name: plance

4.1.2.4.2 Coordinate Representation -- the method of encoding the position of a point bymeasuring its distance from perpendicular reference axes (the "coordinate pair"and "row and column" methods).

Type: compoundShort Name: coordrep

4.1.2.4.2.1 Abscissa Resolution -- the (nominal) minimum distance between the "x"or column values of two adjacent points, expressed in Planar DistanceUnits of measure.

Type: realDomain: Abscissa Resolution > 0.0Short Name: absres

4.1.2.4.2.2 Ordinate Resolution -- the (nominal) minimum distance between the "y"


33

or row values of two adjacent points, expressed in Planar Distance Unitsof measure.

Type: realDomain: Ordinate Resolution > 0.0Short Name: ordres

4.1.2.4.3 Distance and Bearing Representation -- a method of encoding the position of apoint by measuring its distance and direction (azimuth angle) from anotherpoint.

Type: compoundShort Name: distbrep

4.1.2.4.3.1 Distance Resolution -- the minimum distance measurable between twopoints, expressed Planar Distance Units of measure.

Type: realDomain: Distance Resolution > 0.0Short Name: distres

4.1.2.4.3.2 Bearing Resolution -- the minimum angle measurable between twopoints, expressed in Bearing Units of measure.

Type: realDomain: Bearing Resolution > 0.0Short Name: bearres

4.1.2.4.3.3 Bearing Units -- units of measure used for angles.Type: textDomain: "Decimal degrees" "Decimal minutes" "Decimalseconds" “Degrees and decimal minutes" "Degrees, minutes, anddecimal seconds" "Radians" "Grads"Short Name: bearunit

4.1.2.4.3.4 Bearing Reference Direction -- direction from which the bearing ismeasured.

Type: textDomain: "North" "South"Short Name: bearrefd

4.1.2.4.3.5 Bearing Reference Meridian -- axis from which the bearing is measured.Type: textDomain: "Assumed" "Grid" "Magnetic" "Astronomic" "Geodetic"Short Name: bearrefm

4.1.2.4.4 Planar Distance Units -- units of measure used for distances.Type: textDomain: "meters" "international feet" "survey feet" free textShort Name: plandu

4.1.3 Local -- a description of any coordinate system that is not aligned with the surface of theEarth.

Type: compound


34

Short Name: local

4.1.3.1 Local Description -- a description of the coordinate system and its orientation to thesurface of the Earth.

Type: textDomain: free textShort Name: localdes

4.1.3.2 Local Georeference Information -- a description of the information provided toregister the local system to the Earth (e.g. control points, satellite ephemeral data,inertial navigation data).

Type: textDomain: free textShort Name: localgeo

4.1.4 Geodetic Model -- parameters for the shape of the earth.Type: compoundShort Name: geodetic

4.1.4.1 Horizontal Datum Name -- the identification given to the reference system used fordefining the coordinates of points.

Type: textDomain: "North American Datum of 1927" "North American Datum of 1983"free textShort Name: horizdn

4.1.4.2 Ellipsoid Name -- identification given to established representations of the Earth'sshape.

Type: textDomain: "Clarke 1866" "Geodetic Reference System 80" free textShort Name: ellips

4.1.4.3 Semi-major Axis -- radius of the equatorial axis of the ellipsoid.Type: realDomain: Semi-major Axis > 0.0Short Name: semiaxis

4.1.4.4 Denominator of Flattening Ratio -- the denominator of the ratio of the differencebetween the equatorial and polar radii of the ellipsoid when the numerator is set to 1.

Type: realDomain: Denominator of Flattening > 0.0Short Name: denflat

4.2 Vertical Coordinate System Definition -- the reference frame or system from which verticaldistances (altitudes or depths) are measured.

Type: compoundShort Name: vertdef

4.2.1 Altitude System Definition -- the reference frame or system from which altitudes (elevations)are measured. The term "altitude"' is used instead of the common term "elevation" to


35

conform to the terminology in Federal Information Processing Standards 70-1 and 173.Type: compoundShort Name: altsys

4.2.1.1 Altitude Datum Name -- the identification given to the surface taken as the surface ofreference from which altitudes are measured.

Type: textDomain: "National Geodetic Vertical Datum of 1929" "North AmericanVertical Datum of 1988" free textShort Name: altdatum

4.2.1.2 Altitude Resolution -- the minimum distance possible between two adjacent altitudevalues, expressed in Altitude Distance Units of measure.

Type: realDomain: Altitude Resolution > 0.0Short Name: altres

4.2.1.3 Altitude Distance Units -- units in which altitudes are recorded.Type: textDomain: "meters" "feet" free textShort Name: altunits

4.2.1.4 Altitude Encoding Method -- the means used to encode the altitudes.Type: textDomain: "Explicit elevation coordinate included with horizontal coordinates""Implicit coordinate" "Attribute values" Short Name: altenc

4.2.2 Depth System Definition -- the reference frame or system from which depths are measured.Type: compoundShort Name: depthsys

4.2.2.1 Depth Datum Name -- the identification given to surface of reference from whichdepths are measured.

Type: textDomain: "Local surface" "Chart datum; datum for sounding reduction""Lowest astronomical tide" "Highest astronomical tide" "Mean low water""Mean high water" "Mean sea level" "Land survey datum""Mean low water springs" "Mean high water springs" "Mean low water neap""Mean high water neap" "Mean lower low water" "Mean lower low watersprings" "Mean higher high water" "Mean higher low water""Mean lower high water" "Spring tide" "Tropic lower low water" "Neap tide""High water" "Higher high water" "Low water" "Low-water datum""Lowest low water" "Lower low water" "Lowest normal low water" "Mean tidelevel" "Indian spring low water" "High-water full and charge""Low-water full and charge" "Columbia River datum" "Gulf Coast low waterdatum" "Equatorial springs low water" "Approximate lowest astronomical tide""No correction" free textShort Name: depthdn


36

4.2.2.2 Depth Resolution -- the minimum distance possible between two adjacent depthvalues, expressed in Depth Distance Units of measure.

Type: realDomain: Depth Resolution > 0.0Short Name: depthres

4.2.2.3 Depth Distance Units -- units in which depths are recorded.Type: textDomain: "meters" "feet" free textShort Name: depthdu

4.2.2.4 Depth Encoding Method -- the means used to encode depths.Type: textDomain: "Explicit depth coordinate included with horizontal coordinates""Implicit coordinate" "Attribute values"Short Name: depthem


37

Entity and Attribute Information

5 Entity and Attribute Information -- details about the information content of the data set, includingthe entity types, their attributes, and the domains from which attribute values may be assigned.

Type: compoundShort Name: eainfo

Entity_and_Attribute_Information =[1{Detailed_Description}n |

1{Overview_Description}n |1{Detailed_Description}n +1{Overview_Description}n]

Detailed_Description =Entity_Type +

0{Attribute}n

Entity_Type =Entity_Type_Label +Entity_Type_Definition +Entity_Type_Definition_Source

Attribute =Attribute_Label +Attribute_Definition +Attribute_Definition_Source +1{Attribute_Domain_Values}n +0{Beginning_Date_of_Attribute_Values +

0{Ending_Date_of_Attribute_Values}1}n +(Attribute_Value_Accuracy_Information) +(Attribute_Measurement_Frequency)

Attribute_Domain_Values = [Enumerated_Domain |

Range_Domain |Codeset_Domain |Unrepresentable_Domain]

Enumerated_Domain =1{Enumerated_Domain_Value +

Enumerated_Domain_Value_Definition +Enumerated_Domain_Value_Definition_Source +0{Attribute}n }n

Range_Domain =Range_Domain_Minimum +Range_Domain_Maximum +0{Attribute_Units_of_Measure}1 +(Attribute_Measurement_Resolution) +0{Attribute}n


38

Codeset_Domain=Codeset_Name +Codeset_Source

Attribute_Value_Accuracy_Information =Attribute_Value_Accuracy +Attribute_Value_Accuracy_Explanation

Overview_Description =Entity_and_Attribute_Overview +

1{Entity_and_Attribute_Detail_Citation}n

5.1 Detailed Description -- description of the entities, attributes, attribute values, and relatedcharacteristics encoded in the data set.

Type: compoundShort Name: detailed

5.1.1 Entity Type -- the definition and description of a set into which similar entity instances areclassified.

Type: compoundShort Name: enttype

5.1.1.1 Entity Type Label -- the name of the entity type.Type: textDomain: free textShort Name: enttypl

5.1.1.2 Entity Type Definition -- the description of the entity type.Type: textDomain: free textShort Name: enttypd

5.1.1.3 Entity Type Definition Source -- the authority of the definition.Type: textDomain: free textShort Name: enttypds

5.1.2 Attribute -- a defined characteristic of an entity.Type: compoundShort Name: attr

5.1.2.1 Attribute Label -- the name of the attribute.Type: textDomain: free textShort Name: attrlabl

5.1.2.2 Attribute Definition -- the description of the attribute.Type: textDomain: free textShort Name: attrdef


39

5.1.2.3 Attribute Definition Source -- the authority of the definition.Type: textDomain: free textShort Name: attrdefs

5.1.2.4 Attribute Domain Values -- the valid values that can be assigned for an attribute.Type: compoundShort Name: attrdomv

5.1.2.4.1 Enumerated Domain -- the members of an established set of valid values.Type: compoundShort Name: edom

5.1.2.4.1.1 Enumerated Domain Value -- the name or label of a member of the set.Type: textDomain: free textShort Name: edomv

5.1.2.4.1.2 Enumerated Domain Value Definition -- the description of the value.Type: textDomain: free textShort Name: edomvd

5.1.2.4.1.3 Enumerated Domain Value Definition Source -- the authority of thedefinition.

Type: textDomain: free textShort Name: edomvds

5.1.2.4.2 Range Domain -- the minimum and maximum values of a continuum of validvalues.

Type: compoundShort Name: rdom

5.1.2.4.2.1 Range Domain Minimum -- the least value that the attribute can beassigned.

Type: textDomain: free textShort Name: rdommin

5.1.2.4.2.2 Range Domain Maximum -- the greatest value that the attribute can beassigned.

Type: textDomain: free textShort Name: rdommax

5.1.2.4.3 Codeset Domain -- reference to a standard or list which contains the membersof an established set of valid values.

Type: compoundShort Name: codesetd


40

5.1.2.4.3.1 Codeset Name -- the title of the codeset.Type: textDomain: free textShort Name: codesetn

5.1.2.4.3.2 Codeset Source -- the authority for the codeset.Type: textDomain: free textShort Name: codesets

5.1.2.4.4 Unrepresentable Domain -- description of the values and reasons why theycannot be represented.

Type: textDomain: free textShort Name: udom

5.1.2.5 Attribute Units of Measure -- the standard of measurement for an attribute value.Type: textDomain: free textShort Name: attrunit

5.1.2.6 Attribute Measurement Resolution -- the smallest unit increment to which an attributevalue is measured.

Type: realDomain: Attribute Measurement Resolution > 0.0Short Name: attrmres

5.1.2.7 Beginning Date of Attribute Values -- earliest or only date for which the attributevalues are current. In cases when a range of dates are provided, this is the earliestdate for which the information is valid.

Type: dateDomain: free dateShort Name: begdatea

5.1.2.8 Ending Date of Attribute Values -- latest date for which the information is current. Used in cases when a range of dates are provided.

Type: dateDomain: free dateShort Name: enddatea

5.1.2.9 Attribute Value Accuracy Information -- an assessment of the accuracy of theassignment of attribute values.

Type: compoundShort Name: attrvai

5.1.2.9.1 Attribute Value Accuracy -- an estimate of the accuracy of the assignment ofattribute values.

Type: realDomain: free realShort Name: attrva


41

5.1.2.9.2 Attribute Value Accuracy Explanation -- the definition of the Attribute ValueAccuracy measure and units, and a description of how the estimate was derived.

Type: textDomain: free textShort Name: attrvae

5.1.2.10 Attribute Measurement Frequency -- the frequency with which attribute values areadded.

Type: realDomain: "Unknown" "As needed" "Irregular" "None planned" free text Short Name: attrmfrq

5.2 Overview Description -- summary of, and citation to detailed description of, the informationcontent of the data set.

Type: compoundShort Name: overview

5.2.1 Entity and Attribute Overview -- detailed summary of the information contained in a dataset.

Type: textDomain: free textShort Name: eaover

5.2.2 Entity and Attribute Detail Citation -- reference to the complete description of the entitytypes, attributes, and attribute values for the data set.

Type: textDomain: free textShort Name: eadetcit


42

Distribution Information

6 Distribution Information -- information about the distributor of and options for obtaining the dataset.

Type: compoundShort Name: distinfo

Distribution_Information = Distributor +0{Resource_Description}1 +Distribution_Liability +0{Standard_Order_Process}n +0{Custom_Order_Process}1 +(Technical_Prerequisites) +(Available_Time_Period)

Distributor =Contact_Information (see section 10 for production rules)

Standard_Order_Process = [Non-digital_Form |

1{Digital_Form}n ] +Fees +(Ordering_Instructions) +(Turnaround)

Digital_Form = Digital_Transfer_Information +Digital_Transfer_Option

Digital_Transfer_Information =Format_Name +([Format_Version_Number |

Format_Version_Date] +(Format_Specification) ) +

(Format_Information_Content) +0{File_Decompression_Technique}1 +(Transfer_Size)

Digital_Transfer_Option = 1{ [Online_Option |

Offline_Option] }n

Online_Option = 1{Computer_Contact_Information}n +(Access_Instructions) +(Online_Computer_and_Operating_System)

Computer_Contact_Information =[Network_Address |


43

Dialup_Instructions]

Network_Address =1{Network_Resource_Name}n

Dialup_Instructions = Lowest_BPS +0{Highest_BPS}1 +Number_DataBits +Number_StopBits +Parity +0{Compression_Support}1 +1{Dialup_Telephone}n +1{Dialup_File_Name}n

Offline_Option = Offline_Media +0{Recording_Capacity}11{Recording_Format}n +0{Compatibility_Information}1

Recording_Capacity =1{Recording Density}n +Recording_Density_Units

Available_Time_Period =Time_Period_Information (see section 9 for production rules)

6.1 Distributor -- the party from whom the data set may be obtained.Type: compoundShort Name: distrib

6.2 Resource Description -- the identifier by which the distributor knows the data set.Type: textDomain: free textShort Name: resdesc

6.3 Distribution Liability -- statement of the liability assumed by the distributor.Type: textDomain: free textShort Name: distliab

6.4 Standard Order Process -- the common ways in which the data set may be obtained or received, andrelated instructions and fee information.

Type: compoundShort Name: stdorder

6.4.1 Non-digital Form -- the description of options for obtaining the data set on non-computer-compatible media.

Type: text


44

Domain: free textShort Name: nondig

6.4.2 Digital Form -- the description of options for obtaining the data set on computer-compatiblemedia.

Type: compoundShort Name: digform

6.4.2.1 Digital Transfer Information - description of the form of the data to be distributed.Type: compoundShort Name: digtinfo

6.4.2.1.1 Format Name -- the name of the data transfer format.Type: textDomain: domain values from the table below; free textShort Name: formname

DomainValue Definition"ARCE" ARC/INFO Export format"ARCG" ARC/INFO Generate format"ASCII" ASCII file, formatted for text attributes, declaredformat "BIL" Imagery, band interleaved by line"BIP" Imagery, band interleaved by pixel"BSQ" Imagery, band interleaved sequential"CDF" Common Data Format"CFF" Cartographic Feature File (U.S. Forest Service)"COORD" User-created coordinate file, declared format"DEM" Digital Elevation Model format (U.S. GeologicalSurvey) "DFAD" Digital Feature Analysis Data

(National Imagery and Mapping Agency)"DGN" Microstation format (Intergraph Corporation)"DIGEST" Digital Geographic Information Exchange Standard"DLG" Digital Line Graph (U.S. Geological Survey) "DTED" Digital Terrain Elevation Data (MIL-D-89020)"DWG" AutoCAD Drawing format"DX90" Data Exchange '90"DXF" AutoCAD Drawing Exchange Format"ERDAS" ERDAS image files (ERDAS Corporation)"GRASS" Geographic Resources Analysis Support System"HDF" Hierarchical Data Format"IGDS" Interactive Graphic Design System format

(Intergraph Corporation)"IGES" Initial Graphics Exchange Standard"MOSS" Multiple Overlay Statistical System export file"netCDF" network Common Data Format"NITF" National Imagery Transfer Format"RPF" Raster Product Format


45

(National Imagery and Mapping Agency)"RVC" Raster Vector Converted format (MicroImages)"RVF" Raster Vector Format (MicroImages)"SDTS" Spatial Data Transfer Standard

(Federal Information Processing Standard 173)"SIF" Standard Interchange Format (DOD Project 2851)"SLF" Standard Linear Format

(National Imagery and Mapping Agency)"TIFF" Tagged Image File Format"TGRLN" Topologically Integrated Geographic

Encoding and Referencing (TIGER) Line format (Bureau of the Census)

"VPF" Vector Product Format (National Imagery and Mapping Agency)

6.4.2.1.2 Format Version Number -- version number of the format.Type: textDomain: free textShort Name: formvern

6.4.2.1.3 Format Version Date -- date of the version of the format.Type: dateDomain: free dateShort Name: formverd

6.4.2.1.4 Format Specification -- name of a subset, profile, or product specification of theformat.

Type: textDomain: free textShort Name: formspec

6.4.2.1.5 Format Information Content -- description of the content of the data encoded ina format.

Type: textDomain: free textShort Name: formcont

6.4.2.1.6 File Decompression Technique -- recommendations of algorithms or processes(including means of obtaining these algorithms or processes) that can beapplied to read or expand data sets to which data compression techniques havebeen applied.

Type: textDomain: "No compression applied", free textShort Name: filedec

6.4.2.1.7 Transfer Size -- the size, or estimated size, of the transferred data set inmegabytes.

Type: realDomain: Transfer Size > 0.0Short Name: transize


46

6.4.2.2 Digital Transfer Option -- the means and media by which a data set is obtained fromthe distributor.

Type: compoundShort Name: digtopt

6.4.2.2.1 Online Option -- information required to directly obtain the data setelectronically.

Type: compoundShort Name: onlinopt

6.4.2.2.1.1 Computer Contact Information -- instructions for establishingcommunications with the distribution computer.

Type: compoundShort Name: computer

6.4.2.2.1.1.1 Network Address -- the electronic address from which the data setcan be obtained from the distribution computer.

Type: compoundShort Name: networka

6.4.2.2.1.1.1.1 Network Resource Name -- the name of the file or servicefrom which the data set can be obtained.

Type: textDomain: free textShort Name: networkr

6.4.2.2.1.1.2 Dialup Instructions -- information required to access thedistribution computer remotely through telephone lines.

Type: compoundShort Name: dialinst

6.4.2.2.1.1.2.1 Lowest BPS -- lowest or only speed for the connection'scommunication, expressed in bits per second.

Type: integerDomain: Lowest BPS >= 110Short Name: lowbps

6.4.2.2.1.1.2.2 Highest BPS -- highest speed for the connection'scommunication, expressed in bits per second. Used incases when a range of rates are provided.

Type: integerDomain: Highest BPS > Lowest BPSShort Name: highbps

6.4.2.2.1.1.2.3 Number DataBits -- number of data bits in each characterexchanged in the communication.

Type: integerDomain: 7 <= Number DataBits <= 8Short Name: numdata


47

6.4.2.2.1.1.2.4 Number StopBits -- number of stop bits in each characterexchanged in the communication.

Type: integerDomain: 1 <= Number StopBits <= 2Short Name: numstop

6.4.2.2.1.1.2.5 Parity -- parity error checking used in each characterexchanged in the communication.

Type: textDomain: "None" "Odd" "Even" "Mark" "Space"Short Name: parity

6.4.2.2.1.1.2.6 Compression Support -- data compression availablethrough the modem service to speed data transfer.

Type: textDomain: "V.32" "V.32bis" "V.42" "V.42bis"free textShort Name: compress

6.4.2.2.1.1.2.7 Dialup Telephone -- the telephone number of thedistribution computer.

Type: textDomain: free textShort Name: dialtel

6.4.2.2.1.1.2.8 Dialup File Name -- the name of a file containing the dataset on the distribution computer.

Type: textDomain: free textShort Name: dialfile

6.4.2.2.1.2 Access Instructions -- instructions on the steps required to access thedata set.

Type: textDomain: free textShort Name: accinstr

6.4.2.2.1.3 Online Computer and Operating System -- the brand of distributioncomputer and its operating system.

Type: textDomain: free textShort Name: oncomp

6.4.2.2.2 Offline Option -- information about media-specific options for receiving thedata set.

Type: compoundShort Name: offoptn

6.4.2.2.2.1 Offline Media -- name of the media on which the data set can bereceived.


48

Type: textDomain: "CD-ROM" "3-1/2 inch floppy disk" "5-1/4 inch floppydisk" "9-track tape" "4 mm cartridge tape" "8 mm cartridge tape""1/4-inch cartridge tape" free textShort Name: offmedia

6.4.2.2.2.2 Recording Capacity -- the density of information to which data arewritten. Used in cases where different recording capacities are possible.

Type: compoundShort Name: reccap

6.4.2.2.2.2.1 Recording Density -- the density in which the data set can berecorded.

Type: realDomain: Recording Density > 0.0Short Name: recden

6.4.2.2.2.2.2 Recording Density Units -- the units of measure for the recordingdensity.

Type: textDomain: free textShort Name: recdenu

6.4.2.2.2.3 Recording Format -- the options available or method used to write thedata set to the medium.

Type: textDomain: "cpio" "tar" "High Sierra" "ISO 9660""ISO 9660 with Rock Ridge extensions" "ISO 9660 with AppleHFS extensions" free textShort Name: recfmt

6.4.2.2.2.4 Compatibility Information --- description of other limitations orrequirements for using the medium.

Type: textDomain: free textShort Name: compat

6.4.3 Fees -- the fees and terms for retrieving the data set.Type: textDomain: free textShort Name: fees

6.4.4 Ordering Instructions -- general instructions and advice about, and special terms andservices provided for, the data set by the distributor.

Type: textDomain: free textShort Name: ordering

6.4.5 Turnaround -- typical turnaround time for the filling of an order.Type: text


49

Domain: free textShort Name: turnarnd

6.5 Custom Order Process -- description of custom distribution services available, and the terms andconditions for obtaining these services.

Type: textDomain: free textShort Name: custom

6.6 Technical Prerequisites -- description of any technical capabilities that the consumer must have touse the data set in the form(s) provided by the distributor.

Type: textDomain: free textShort Name: techpreq

6.7 Available Time Period -- the time period when the data set will be available from the distributor.Type: compoundShort Name: availabl


50

Metadata Reference Information

7 Metadata Reference Information -- information on the currentness of the metadata information, andthe responsible party.

Type: compoundShort Name: metainfo

Metadata_Reference_Information = Metadata_Date +(Metadata_Review_Date) +(Metadata_Future_Review_Date) +Metadata_Contact +Metadata_Standard_Name +Metadata_Standard_Version +0{Metadata_Time_Convention}1 +(Metadata_Access_Constraints) +(Metadata_Use_Constraints) +(Metadata_Security_Information) + 0{Metadata_Extensions}n

Metadata_Contact =Contact_Information (see section 10 for production rules)

Metadata_Security_Information =Metadata_Security_Classification_System +Metadata_Security_Classification +Metadata_Security_Handling_Description

Metadata_Extensions =0{Online_Linkage}n +0{Profile_Name}1

7.1 Metadata Date -- the date that the metadata were created or last updated.Type: dateDomain: free dateShort Name: metd

7.2 Metadata Review Date -- the date of the latest review of the metadata entry.Type: dateDomain: free date; Metadata Review Date later than Metadata DateShort Name: metrd

7.3 Metadata Future Review Date -- the date by which the metadata entry should be reviewed.Type: dateDomain: free date; Metadata Future Review Date later than Metadata Review DateShort Name: metfrd

7.4 Metadata Contact -- the party responsible for the metadata information.Type: compound


51

Short Name: metc

7.5 Metadata Standard Name -- the name of the metadata standard used to document the data set.Type: textDomain: "FGDC Content Standard for Digital Geospatial Metadata" free textShort Name: metstdn

7.6 Metadata Standard Version -- identification of the version of the metadata standard used todocument the data set.

Type: textDomain: free textShort Name: metstdv

7.7 Metadata Time Convention -- form used to convey time of day information in the metadata entry. Used if time of day information is included in the metadata for a data set.

Type: textDomain: "local time" "local time with time differential factor" "universal time"Short Name: mettc

7.8 Metadata Access Constraints -- restrictions and legal prerequisites for accessing the metadata. These include any access constraints applied to assure the protection of privacy or intellectualproperty, and any special restrictions or limitations on obtaining the metadata.

Type: textDomain: free textShort Name: metac

7.9 Metadata Use Constraints -- restrictions and legal prerequisites for using the metadata after accessis granted. These include any metadata use constraints applied to assure the protection of privacyor intellectual property, and any special restrictions or limitations on using the metadata.

Type: textDomain: free textShort Name: metuc

7.10 Metadata Security Information -- handling restrictions imposed on the metadata because of nationalsecurity, privacy, or other concerns.

Type: compoundShort Name: metsi

7.10.1 Metadata Security Classification System -- name of the classification system for themetadata.

Type: textDomain: free textShort Name: metscs

7.10.2 Metadata Security Classification -- name of the handling restrictions on the metadata.Type: textDomain: "Top secret" "Secret" "Confidential" "Restricted" "Unclassified" "Sensitive"free textShort Name: metsc


52

7.10.3 Metadata Security Handling Description -- additional information about the restrictions onhandling the metadata.

Type: textDomain: free textShort Name: metshd

7.11 Metadata Extensions – a reference to extended elements to the standard which may be defined by ametadata producer or a user community. Extended elements are elements outside the Standard, butneeded by the metadata producer. If extended elements are created, they must follow the guidelinesin Appendix D, Guidelines for Creating Extended Elements to the Content Standard for DigitalGeospatial Metadata.

Type: compoundShort Name: metextns

7.11.1 Online Linkage -- the name of an online computer resource that contains the metadataextension information for the data set. Entries should follow the Uniform Resource Locatorconvention of the Internet.

Type: textDomain: free textShort Name: onlink

7.11.2 Profile Name -- the name given to a document that describes the application of the Standardto a specific user community.

Type: textDomain: free textShort Name: metprof


53

Citation Information

8 Citation Information -- the recommended reference to be used for the data set. (Note: this sectionprovides a means of stating the citation of a data set, and is used by other sections of the metadatastandard. This section is never used alone.)

Type: compoundShort Name: citeinfo

Citation_Information =1{Originator}n +Publication_Date +(Publication_Time) +Title +0{Edition}1 +0{Geospatial_Data_Presentation_Form}1 +0{Series_Information}1 +0{Publication_Information}1 +0{Other_Citation_Details}1 +(1{Online_Linkage}n) +0{Larger_Work_Citation}1

Series_Information =Series_Name +Issue_Identification

Publication_Information =Publication_Place +Publisher

Larger_Work_Citation =Citation_Information

8.1 Originator -- the name of an organization or individual that developed the data set. If the name ofeditors or compilers are provided, the name must be followed by "(ed.)" or "(comp.)" respectively.

Type: textDomain: "Unknown" free textShort Name: origin

8.2 Publication Date -- the date when the data set is published or otherwise made available for release.Type: dateDomain: "Unknown" "Unpublished material" free dateShort Name: pubdate

8.3 Publication Time -- the time of day when the data set is published or otherwise made available forrelease.

Type: timeDomain: "Unknown" free timeShort Name: pubtime

8.4 Title -- the name by which the data set is known.


54

Type: textDomain: free textShort Name: title

8.5 Edition -- the version of the title.Type: textDomain: free textShort Name: edition

8.6 Geospatial Data Presentation Form -- the mode in which the geospatial data are represented.Type: textDomain: (the listed domain is partially from pp. 88-91 in Anglo-American Committee onCataloguing of Cartographic Materials, 1982, Cartographic materials: A manual ofinterpretation for AACR2: Chicago, American Library Association):"atlas" “audio” "diagram" “document” "globe" "map" "model" “multimedia presentation”"profile" “raster digital data” "remote-sensing image" "section" “spreadsheet” “tabulardigital data” “vector digital data” “video” "view" free textShort Name: geoform

8.7 Series Information -- the identification of the series publication of which the data set is a part.Type: compoundShort Name: serinfo

8.7.1 Series Name -- the name of the series publication of which the data set is a part.Type: textDomain: free textShort Name: sername

8.7.2 Issue Identification -- information identifying the issue of the series publication of which thedata set is a part.

Type: textDomain: free textShort Name: issue

8.8 Publication Information -- publication details for published data sets.Type: compoundShort Name: pubinfo

8.8.1 Publication Place -- the name of the city (and state or province, and country, if needed toidentify the city) where the data set was published or released.

Type: textDomain: free textShort Name: pubplace

8.8.2 Publisher -- the name of the individual or organization that published the data set.Type: textDomain: free textShort Name: publish

8.9 Other Citation Details -- other information required to complete the citation.


55

Type: textDomain: free textShort Name: othercit

8.10 Online Linkage -- the name of an online computer resource that contains the data set. Entriesshould follow the Uniform Resource Locator convention of the Internet.

Type: textDomain: free textShort Name: onlink

8.11 Larger Work Citation -- the information identifying a larger work in which the data set is included.Type: compoundShort Name: lworkcit


56

Time Period Information

9 Time Period Information -- information about the date and time of an event. (Note: this sectionprovides a means of stating temporal information, and is used by other sections of the metadatastandard. This section is never used alone.)

Type: compoundShort Name: timeinfo

Time_Period_Information =[Single_Date/Time |

Multiple_Dates/Times |Range_of_Dates/Times ]

Single_Date/Time =Calendar_Date +(Time_of_Day)

Multiple_Dates/Times =2{Single_Date/Time}n

Range_of_Dates/Times =Beginning_Date +(Beginning_Time) +Ending_Date +(Ending_Time)

9.1 Single Date/Time -- means of encoding a single date and time.Type: compoundShort Name: sngdate

9.1.1 Calendar Date -- the year (and optionally month, or month and day).Type: dateDomain: "Unknown" free dateShort Name: caldate

9.1.2 Time of Day -- the hour (and optionally minute, or minute and second) of the day.Type: timeDomain: "Unknown" free timeShort Name: time

9.2 Multiple Dates/Times -- means of encoding multiple individual dates and times.Type: compoundShort Name: mdattim

9.3 Range of Dates/Times -- means of encoding a range of dates and times.Type: compoundShort Name: rngdates

9.3.1 Beginning Date -- the first year (and optionally month, or month and day) of the event.Type: date


57

Domain: "Unknown" free dateShort Name: begdate

9.3.2 Beginning Time -- the first hour (and optionally minute, or minute and second) of the dayfor the event.

Type: timeDomain: "Unknown" free timeShort Name: begtime

9.3.3 Ending Date -- the last year (and optionally month, or month and day) for the event.Type: dateDomain: "Unknown" "Present" free dateShort Name: enddate

9.3.4 Ending Time -- the last hour (and optionally minute, or minute and second) of the day forthe event.

Type: timeDomain: "Unknown" free timeShort Name: endtime


58

Contact Information

10 Contact Information -- Identity of, and means to communicate with, person(s) and organization(s)associated with the data set. (Note: this section provides a means of identifying individuals andorganizations, and is used by other sections of the metadata standard. This section is never usedalone.)

Type: compoundShort Name: cntinfo

Contact_Information = [Contact_Person_Primary |

Contact_Organization_Primary] +(Contact_Position) +1{Contact_Address}n +1{Contact_Voice_Telephone}n +(1{Contact_TDD/TTY_Telephone}n) +(1{Contact_Facsimile_Telephone}n) +(1{Contact_Electronic_Mail_Address}n) +(Hours_of_Service) +(Contact_Instructions)

Contact_Person_Primary = Contact_Person +(Contact_Organization)

Contact_Organization_Primary = Contact_Organization +(Contact_Person)

Contact_Address = Address_Type +0{Address}n +City +State_or_Province +Postal_Code +(Country)

10.1 Contact Person Primary -- the person, and the affiliation of the person, associated with the data set. Used in cases where the association of the person to the data set is more significant than theassociation of the organization to the data set.

Type: compoundShort Name: cntperp

10.1.1 Contact Person -- the name of the individual to which the contact type applies.Type: textDomain: free text

Short Name: cntper

10.1.2 Contact Organization -- the name of the organization to which the contact type applies.Type: text


59

Domain: free textShort Name: cntorg

10.2 Contact Organization Primary -- the organization, and the member of the organization, associatedwith the data set. Used in cases where the association of the organization to the data set is moresignificant than the association of the person to the data set.

Type: compoundShort Name: cntorgp

10.3 Contact Position -- the title of individual.Type: textDomain: free textShort Name: cntpos

10.4 Contact Address -- the address for the organization or individual.Type: compoundShort Name: cntaddr

10.4.1 Address Type -- the information provided by the address.Type: textDomain: "mailing" "physical" "mailing and physical", free textShort Name: addrtype

10.4.2 Address -- an address line for the address.Type: textDomain: free textShort Name: address

10.4.3 City -- the city of the address.Type: textDomain: free textShort Name: city

10.4.4 State or Province -- the state or province of the address.Type: textDomain: free textShort Name: state

10.4.5 Postal Code -- the ZIP or other postal code of the address.Type: textDomain: free textShort Name: postal

10.4.6 Country -- the country of the address.Type: textDomain: free textShort Name: country

10.5 Contact Voice Telephone -- the telephone number by which individuals can speak to theorganization or individual.


60

Type: textDomain: free textShort Name: cntvoice

10.6 Contact TDD/TTY Telephone -- the telephone number by which hearing-impaired individuals cancontact the organization or individual.

Type: textDomain: free textShort Name: cnttdd

10.7 Contact Facsimile Telephone -- the telephone number of a facsimile machine of the organization orindividual.

Type: textDomain: free textShort Name: cntfax

10.8 Contact Electronic Mail Address -- the address of the electronic mailbox of the organization orindividual.

Type: textDomain: free textShort Name: cntemail

10.9 Hours of Service -- time period when individuals can speak to the organization or individual.Type: textDomain: free textShort Name: hours

10.10 Contact Instructions -- supplemental instructions on how or when to contact the individual ororganization.

Type: textDomain: free textShort Name: cntinst

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial MetadataAppendix A, Glossary

61

Appendix AGlossary

[Most of the terms and definitions are from Department of Commerce, 1992, Spatial Data TransferStandard (SDTS) (Federal Information Processing Standard 173): Washington: Department ofCommerce, National Institute of Standards and Technology.]

abscissa -- the coordinate of a point in a plane Cartesian coordinate system obtained by measuring parallelto the x-axis ("the 'x' value").

accuracy -- the closeness of results of observations, computations or estimates to the true values or thevalues accepted as being true.

altitude -- elevation above or below a reference datum, as defined in Federal Information ProcessingStandard 70-1. See also elevation.

area -- a generic term for a bounded, continuous, two-dimensional object that may or may not include itsboundary.

area chain -- a chain that explicitly references left and right polygons and not start and end nodes. It is acomponent of a two-dimensional manifold.

area point -- a representative point within an area usually carrying attribute information about that area.

arc -- a locus of points that forms a curve that is defined by a mathematical expression.

attribute -- a defined characteristic of an entity type (e.g. composition).

attribute value -- a specific quality or quantity assigned to an attribute (e.g., steel), for a specific entityinstance.

cardinality --the number of elements in an extended compound element

chain -- a directed nonbranching sequence of nonintersecting line segments and (or) arcs bounded bynodes, not necessarily distinct, at each end. Area chain, complete chain, and network chain are specialcases of chain, and share all characteristics of the general case as defined above.

child -- the name of the data element which may occur under this data element. A child element may bean extended or a standard element.

clearinghouse -- see National Geospatial Data Clearinghouse.

complete chain -- a chain that explicitly references left and right polygons and start and end nodes. It is acomponent of a two-dimensional manifold.

compound element -- a group of data elements and other compound elements. Compound elementsrepresent higher-level concepts that cannot be represented by individual data elements.


62

coordinates -- pairs of numbers expressing horizontal distances along orthogonal axes; alternatively,triplets of numbers measuring horizontal and vertical distances.

data element -- a logically primitive item of data.

data set -- a collection of related data.

depth -- perpendicular distance of an interior point from the surface of an object.

developable surface -- a surface that can be flattened to form a plane without compressing or stretchingany part of it. Examples include cones and cylinders.

digital image -- a two-dimensional array of regularly spaced picture elements (pixels) constituting apicture.

digital volume -- a three-dimensional array of regularly spaced volume elements (voxels) constituting avolume.

domain -- in the definition of the elements in the metadata standard, the domain identifies valid values fora data element.

Edge, Topology Level 0 -- VPF term for a string.

Edge, Topology Level 1 -- VPF term for a network chain in a network (in SDTS, a "Network chain, non-planar graph").

Edge, Topology Level 2 -- VPF term for a network chain in a planar graph (in SDTS, a "Network chain,planar graph").

Edge, Topology Level 3 -- VPF term for a complete chain.

elevation -- conforming to Federal Information Processing Standard 70-1, the term "altitude" is used inthis standard, rather than the common term elevation.

entity instance -- a spatial phenomenon of a defined type that is embedded in one or more phenomena ofdifferent type, or that has at least one key attribute value different from the corresponding attribute valuesof surrounding phenomena (e.g., the 10 Street Bridge).

entity point -- a point used for identifying the location of point features (or areal features collapsed to apoint), such as towers, buoys, buildings, places, etc.

entity type -- the definition and description of a set into which similar entity instances are classified (e.g.,bridge).

explicit -- method of identifying positions directly by pairs (for horizontal positions) or triplets (forhorizontal and vertical positions) of numbers.

extended element -- a user-defined metadata element included in a metadata collection. Extendedelements may be defined by a data set producer or a user community. Extended elements are elements


63

outside the Standard, but needed by the data set producer. If extended elements are created, they mustfollow the guidelines in Appendix D, Guidelines for Creating Extended Elements in the Content Standardfor Digital Geospatial Metadata.

Face, Topology Level 3 -- VPF term for a GT-polygon composed of rings.

G-polygon -- an area consisting of an interior area, one outer G-ring and zero or more nonintersecting,nonnested inner G-rings. No ring, inner or outer, shall be collinear with or intersect any other ring of thesame G-polygon.

G-ring --a string composed of pairs of longitude and latitude coordinates that define a closed non-intersecting boundary.

G-ring point -- a scalar consisting of a set of ordered pairs of floating-point numbers, separated bycommas, in which the first number in each pair is the longitude of a point and the second is the latitude ofthe point. Longitude and latitude are specified in decimal degrees with north latitudes positive and southnegative, east longitude positive and west negative.

geospatial data -- information that identifies the geographic location and characteristics of natural orconstructed features and boundaries on the earth. This information may be derived from, among otherthings, remote sensing, mapping, and surveying technologies.

graph -- a set of topologically interrelated zero-dimensional (node), one-dimensional (link or chain), andsometimes two-dimensional (GT-polygon) objects that conform to a set of defined constraint rules. Numerous rule sets can be used to distinguish different types of graphs. Three such types, planar graph,network, and two-dimensional manifold, are used in this standard. All three share the following rules:each link or chain is bounded by an ordered pair of nodes, not necessarily distinct; a node may bound oneor more links or chains; and links or chains may only intersect at nodes. Planar graphs and networks aretwo specialized types of graphs, and a two-dimensional manifold is an even more specific type of planargraph.

grid -- (1) a set of grid cells forming a regular, or nearly regular, tessellation of a surface; (2) a set ofpoints arrayed in a pattern that forms a regular, or nearly regular, tessellation of a surface. Thetessellation is regular if formed by repeating the pattern of a regular polygon, such as a square, equilateraltriangle, or regular hexagon. The tessellation is nearly regular if formed by repeating the pattern of an"almost" regular polygon such as a rectangle, non-square parallelogram, or non-equilateral triangle.

grid cell -- a two-dimensional object that represents the smallest nondivisible element of a grid.

GT-polygon -- an area that is an atomic two-dimensional component of one and only one two-dimensionalmanifold. The boundary of a GT-polygon may be defined by GT-rings created from its bounding chains. A GT-polygon may also be associated with its chains (either the bounding set, or the complete set) bydirect reference to these chains. The complete set of chains associated with a GT-polygon may also befound by examining the polygon references on the chains.

GT-ring -- a ring created from complete and (or) area chains.

horizontal -- tangent to the geoid or parallel to a plane that is tangent to the geoid.


64

implicit -- method of identifying positions by a place in an array of values.

interior area -- an area not including its boundary.

label point -- a reference point used for displaying map and chart text (e.g., feature names) to assist infeature identification.

latitude -- angular distance measured on a meridian north or south from the equator.

layer -- an integrated, areally distributed, set of spatial data usually representing entity instances withinone theme, or having one common attribute or attribute value in an association of spatial objects. In thecontext of raster data, a layer is specifically a two-dimensional array of scalar values associated with all ofpart of a grid or image.

line -- a generic term for a one-dimensional object.

line segment -- a direct line between two points.

link -- a topological connection between two nodes. A link may be directed by ordering its nodes.

longitude -- angular distance between the plane of a meridian east or west from the plane of the meridianof Greenwich.

map -- a spatial representation, usually graphic on a flat surface, of spatial phenomena.media -- the physical devices used to record, store, and (or) transmit data.

meridian -- a great circle on the Earth that passes through the geographic poles.

metadata -- data about the content, quality, condition, and other characteristics of data.

name -- the name of an extended element. The extended element name must not be the name of any otherelement in the Standard.

National Geospatial Data Clearinghouse -- a distributed network of geospatial data producers, managers,and users linked electronically. Building on initiatives such as the national information infrastructure, theclearinghouse uses a distributed, electronically connected network, such as the Internet. Each dataprovider will describe available data in an electronic form, and provide these descriptions (or "metadata")using means that can be accessed over a communications network. Thus, the data for the clearinghouseare located at the sites of data producers (or, where more efficient, at the sites of intermediaries)throughout the country. Using the network, users will search these descriptions to locate data that aresuitable for their applications.

network -- a graph without two dimensional objects. If projected onto a two-dimensional surface, anetwork can have either more than one node at a point and (or) intersecting links or chains withoutcorresponding nodes.

network chain -- a chain that explicitly references start and end nodes and not left and right polygons. Itis a component of a network.


65

node -- a zero-dimensional object that is a topological junction of two or more links or chains, or an endpoint of a link or chain.

Node, Topology Level 0 -- VPF term for a point (in SDTS, a "point").

Node, Topology Level 1 -- VPF term for a node on a network (in SDTS, a "node, network").

Node, Topology Level 2 -- VPF term for a node on a planar graph (in SDTS, a "node, planar graph").

Node, Topology Level 3 -- VPF term for a point used to represent isolated features. These aretopologically linked to a containing face.

object -- a digital representation of all or part of an entity instance.

optionality - The optionality of a section or compound element always takes precedence over the elementsthat it contains. Once a section or compound element is recognized by the data set producer as applicable,then the optionality of its subordinate elements is to be interpreted. See Production Rules section foradditional interpretive guidance.

ordinate -- the coordinate of a point in a plane cartesian coordinate system obtained by measuring parallelto the y-axis ("the 'y' value").

parent -- the name of the data element under which a given data element may occur. A parent elementmay be an extended or a standard element.

phenomenon -- a fact, occurrence or circumstance. Route 10, George Washington National Forest, andChesterfield County are all phenomena.

pixel -- two-dimensional picture element that is the smallest nondivisible element of a digital image.

planar graph -- the node and link or chain objects of the graph occur or can be represented as though theyoccur upon a planar surface. Not more than one node may exist at any given point on the surface. Linksor chains may only intersect at nodes.

point -- a zero-dimensional object that specifies geometric location. One coordinate pair or tripletspecifies the location. Area point, entity point, and label point are special implementations of the generalcase.

primitive -- the quality of not being subdivided; atomic.

quality -- an essential or distinguishing characteristic necessary for cartographic data to be fit for use.

raster -- one or more overlapping layers for the same grid or digital image.

raster object - one or more images and/or grids, each grid or image representing a layer, such thatcorresponding grid cells and/or pixels between layers are congruent and registered.

rationale - a component of an extended element. The rationale is provided by the user creating theextended element to explain the reason for its creation and its expected uses.


66

repeatability --whether or not an extended element can be repeated and optionally a minimum ormaximum number of occurrences or both

resolution-- the minimum difference between two independently measured or computed values which canbe di stinguished by the measurement or analytical method being considered or used.

ring -- sequence of nonintersecting chains or strings and (or) arcs, with closure. A ring represents aclosed boundary, but not the interior area inside the closed boundary.

SDTS -- the Spatial Data Transfer Standard defined by Department of Commerce, 1992, Spatial DataTransfer Standard (SDTS) (Federal Information Processing Standard 173): Washington, Department ofCommerce, National Institute of Standards and Technology.

short name -- a unique name for each compound or primitive data element consisting of eight alphabeticcharacters or less. When creating extended element short names, do not duplicate an existing standardelement short name.

source --a component of an extended element. the name of the individual or organization creating anextended element

spatial data -- see geospatial data.

stratum -- one of a series of layers, levels, or gradations in an ordered system. For this standard, the termis used in the sense of (1) a region of sea, atmosphere, or geology that is distinguished by natural orarbitrary limits; (2) a socioeconomic level of society comprised of persons of the same or similar status,especially with regard to education or culture; or (3) a layer of vegetation, usually of the same or similarheight.

string -- a connected non-branching sequence of line segments specified as the ordered sequence of pointsbetween those line segments. Note: A string may intersect itself or other strings.

two-dimensional manifold -- a planar graph and its associated two dimensional objects. Each chainbounds two and only two, not necessarily distinct, GT-polygons. The GT-polygons are mutually exclusiveand completely exhaust the surface.

type -- in the definition of the elements in the metadata standard, a compound element has the type"compound" to provide a unique way to identify compound elements. For a data element, the typeidentifies the kind of value that can be assigned to the data element. The choices are "integer" for integernumbers, "real" for real numbers, "text" for ASCII characters, "date" for day of the year, and "time" fortime of the day.

universe polygon -- defines the part of the universe that is outside the perimeter of the area covered byother GT-polygons ("covered area") and completes the two-dimensional manifold. This polygoncompletes the adjacency relationships of the perimeter links. The boundary of the universe polygon isrepresented by one or more inner rings and no outer ring. Attribution of the universe polygon may notexist, or may be substantially different from the attribution of the covered area.

vector -- composed of directed lines.


67

vertical -- at right angles to the horizontal; includes altitude and depth.

VPF -- the Vector Product Format defined by Department of Defense, 1992, Vector Product Format (MIL-STD-600006): Philadelphia, Department of Defense, Defense Printing Service Detachment Office.

void polygon -- defines a part of the two-dimensional manifold that is bounded by other GT-polygons, butotherwise has the same characteristics as the universe polygon. The geometry and topology of a voidpolygon are those of a GT-polygon. Attribution of a void polygon may not exist, or may be substantiallydifferent from the attribution of the covered area.voxel -- a three-dimensional element that is the smallest nondivisible element of a digital volume.

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial MetadataAppendix B, Alphabetical List of Compound Elements and Data Elements

68

Appendix BAlphabetical List of Compound Elements and Data Elements

Abscissa Resolution, 32 City, 59Abstract, 4 Cloud Cover, 15Access Constraints, 7 Codeset Domain, 39Access Instructions, 47 Codeset Name, 40Address, 59 Codeset Source, 40Address Type, 59 Column Count, 18Albers Conical Equal Area, 25 Compatibility Information, 48Altitude Datum Name, 35 Completeness Report, 12Altitude Distance Units, 35 Compression Support, 47Altitude Encoding Method, 35 Computer Contact Information, 46Altitude Resolution, 35 Contact Address, 59Altitude System Definition, 34 Contact Electronic Mail Address, 60ARC Coordinate System, 31 Contact Facsimile Telephone, 60ARC System Zone Identifier, 31 Contact Information, 58Attribute, 38 Contact Instructions, 60Attribute Accuracy, 11 Contact Organization, 58Attribute Accuracy Explanation, 11 Contact Organization Primary, 59Attribute Accuracy Report, 11 Contact Person, 58Attribute Accuracy Value, 11 Contact Person Primary, 58Attribute Definition, 38 Contact Position, 59Attribute Definition Source, 39 Contact TDD/TTY Telephone, 60Attribute Domain Values, 39 Contact Voice Telephone, 59Attribute Label, 38 Coordinate Representation, 32Attribute Measurement Frequency, 41 Country, 59Attribute Measurement Resolution, 40 Cross Reference, 9Attribute Units of Measure, 40 Currentness Reference, 4Attribute Value Accuracy, 40 Custom Order Process, 49Attribute Value Accuracy Explanation, 41 Data Quality Information, 10Attribute Value Accuracy Information, 40 Data Set Credit, 8Available Time Period, 49 Data Set G-Polygon, 5Azimuth Measure Point Longitude, 29 Data Set G-Polygon Outer G-Ring, 5Azimuthal Angle, 28 Denominator of Flattening Ratio, 34Azimuthal Equidistant, 25 Depth Datum Name, 35Bearing Reference Direction, 33 Depth Distance Units, 36Bearing Reference Meridian, 33 Depth Encoding Method, 36Bearing Resolution, 33 Depth Resolution, 36Bearing Units, 33 Depth System Definition, 35Beginning Date, 56 Description, 4Beginning Date of Attribute Values, 40 Detailed Description, 38Beginning Time, 57 Dialup File Name, 47Bounding Coordinates, 5 Dialup Instructions, 46Browse Graphic, 8 Dialup Telephone, 47Browse Graphic File Description, 8 Digital Form, 44Browse Graphic File Type, 8 Digital Transfer Information, 44Calendar Date, 56 Digital Transfer Option, 46Citation, 4 Direct Spatial Reference Method, 16

Citation Information, 53


69

Distance and Bearing Representation, 33 Horizontal Datum Name, 34Distance Resolution, 33 Horizontal Positional Accuracy, 12Distribution Information, 42 Horizontal Positional Accuracy Explanation, 12Distribution Liability, 43 Horizontal Positional Accuracy Report, 12Distributor, 43 Horizontal Positional Accuracy Value, 12East Bounding Coordinate, 5 Hours of Service, 60Edition, 54 Identification Information, 2Ellipsoid Name, 34 Indirect Spatial Reference, 16Ending Date, 57 Issue Identification, 54Ending Date of Attribute Values, 40 Keywords, 6Ending Time, 57 Lambert Azimuthal Equal Area, 25Entity and Attribute Detail Citation, 41 Lambert Conformal Conic, 26Entity and Attribute Information, 37 Landsat Number, 29Entity and Attribute Overview, 41 Larger Work Citation, 55Entity Type, 38 Latitude of Projection Center, 28Entity Type Definition, 38 Latitude of Projection Origin, 27Entity Type Definition Source, 38 Latitude Resolution, 24Entity Type Label, 38 Lineage, 13Enumerated Domain, 39 Local, 33Enumerated Domain Value, 39 Local Description, 34Enumerated Domain Value Definition, 39 Local Georeference Information, 34Enumerated Domain Value Definition Source, Local Planar, 32

39 Local Planar Description, 32Equidistant Conic, 25 Local Planar Georeference Information, 32Equirectangular, 25 Logical Consistency Report, 12False Easting, 27 Longitude of Central Meridian, 27False Northing, 27 Longitude of Projection Center, 28Fees , 48 Longitude Resolution, 24File Decompression Technique, 45 Lowest BPS, 46Format Information Content, 45 Map Projection, 25Format Name, 44 Map Projection Name, 25Format Specification, 45 Map Projection Parameters, 27Format Version Date, 45 Mercator, 26Format Version Number, 45 Metadata, 1G-Ring, 6 Metadata Access Constraints, 51G-Ring Latitude, 6 Metadata Contact, 50G-Ring Longitude, 6 Metadata Date, 50G-Ring Point, 5 Metadata Extensions, 52General Vertical Near-sided Perspective, 25 Metadata Future Review Date, 50Geodetic Model, 34 Metadata Reference Information, 50Geographic, 24 Metadata Review Date, 50Geographic Coordinate Units, 24 Metadata Security Classification, 51Geospatial Data Presentation Form, 54 Metadata Security Classification System, 51Gnomonic, 25 Metadata Security Handling Description, 52Grid Coordinate System, 30 Metadata Security Information, 51Grid Coordinate System Name, 30 Metadata Standard Name, 51Height of Perspective Point Above Surface, 28 Metadata Standard Version, 51Highest BPS, 46 Metadata Time Convention, 51Horizontal Coordinate System Definition, 24 Metadata Use Constraints, 51


70

Miller Cylindrical, 26 Profile Name, 52Modified Stereographic for Alaska, 26 Progress, 4Multiple Dates/Times, 56 Publication Date, 53Native Data Set Environment, 9 Publication Information, 54Network Address, 46 Publication Place, 54Network Resource Name, 46 Publication Time, 53Non-digital Form, 43 Publisher, 54North Bounding Coordinate, 5 Purpose, 4Number DataBits, 46 Quantitative Attribute Accuracy Assessment, 11Number StopBits, 47 Quantitative Horizontal Positional AccuracyOblique Line Azimuth, 28 Assessment, 12Oblique Line Latitude, 29 Quantitative Vertical Positional AccuracyOblique Line Longitude, 29 Assessment, 13Oblique Line Point, 29 Range Domain, 39Oblique Mercator, 26 Range Domain Maximum, 39Offline Media, 47 Range Domain Minimum, 39Offline Option, 47 Range of Dates/Times, 56Online Computer and Operating System, 47 Raster Object Information, 18Online Linkage, 52, 55 Raster Object Type, 18Online Option, 46 Recording Capacity, 48Ordering Instructions, 48 Recording Density, 48Ordinate Resolution, 32 Recording Density Units, 48Originator, 53 Recording Format, 48Orthographic, 26 Resource Description, 43Other Citation Details, 54 Robinson, 26Other Grid System's Definition, 31 Row Count , 18Other Projection’s Definition, 30 Scale Factor at Center Line, 28Overview Description, 41 Scale Factor at Central Meridian, 30Parity, 47 Scale Factor at Equator, 28Path Number, 29 Scale Factor at Projection Origin, 29Place, 6 SDTS Point and Vector Object Type, 17Place Keyword, 7 SDTS Terms Description, 17Place Keyword Thesaurus, 7 Security Classification System, 9Planar, 24 Security Handling Description, 9Planar Coordinate Encoding Method, 32 Security Information, 9Planar Coordinate Information, 32 Semi-major Axis, 34Planar Distance Units, 33 Series Information, 54Point and Vector Object Count, 17 Series Name, 54Point and Vector Object Information, 16 Single Date/Time, 56Point of Contact , 8 Sinusoidal, 26Polar Stereographic, 26 Source Citation, 13Polyconic, 26 Source Citation Abbreviation, 14Positional Accuracy, 12 Source Contribution, 14Postal Code, 59 Source Currentness Reference, 14Process Contact, 15 Source Information, 13Process Date, 14 Source Produced Citation Abbreviation, 15Process Description, 14 Source Scale Denominator, 13Process Step, 14 Source Time Period of Content, 14Process Time, 15 Source Used Citation Abbreviation, 14


71

South Bounding Coordinate, 5 West Bounding Coordinate, 5Space Oblique Mercator (Landsat), 26Spatial Data Organization Information, 16Spatial Domain, 5Spatial Reference Information, 19SPCS Zone Identifier, 31Standard Order Process, 43Standard Parallel, 27State or Province, 59State Plane Coordinate System (SPCS), 31Status, 4Stereographic, 27Straight Vertical Longitude from Pole, 29Stratum, 7Stratum Keyword, 7Stratum Keyword Thesaurus, 7Supplemental Information, 4Technical Prerequisites, 49Temporal, 7Temporal Keyword, 7Temporal Keyword Thesaurus, 7Theme, 6Theme Keyword, 6Theme Keyword Thesaurus, 6Time of Day, 56Time Period Information, 56Time Period of Content, 4Title, 53Transfer Size, 45Transverse Mercator, 27Turnaround, 48Type of Source Media, 13Universal Polar Stereographic (UPS), 31Universal Transverse Mercator (UTM), 30Unrepresentable Domain, 40UPS Zone Identifier, 31Use Constraints, 8UTM Zone Number, 30van der Grinten, 27Vertical Coordinate System Definition, 34Vertical Count, 18Vertical Positional Accuracy, 13Vertical Positional Accuracy Explanation, 13Vertical Positional Accuracy Report, 13Vertical Positional Accuracy Value, 13VPF Point and Vector Object Type, 18VPF Terms Description, 17VPF Topology Level, 17VPF_Point_and_Vector_Object_Information, 18

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial Metadata Appendix C, References

72

Appendix CReferences

American Congress on Surveying and Mapping and American Society of Civil Engineering, 1978,Definitions of surveying and associated terms: Falls Church, Virginia, American Congress on Surveyingand Mapping.

American National Standards Institute, 1975, Representations of universal time, local time differentials,and United States time zone reference for information interchange (ANSI X3.51-1975): New York,American National Standards Institute.

American National Standards Institute, 1986, Representation for calendar date and ordinal date forinformation interchange (ANSI X3.30-1985): New York, American National Standards Institute.

American National Standards Institute, 1986, Representations of local time of day for informationinterchange (ANSI X3.43-1986): New York, American National Standards Institute.

American National Standards Institute, 1986, Representations of Geographic Point Locations forInformation Interchange (ANSI X3.61-1986): New York, American National Standards Institute.

American National Standards Institute, 1990, Dictionary for information systems (ANSI X3.172-1990): New York, American National Standards Institute.

Anglo-American Committee on Cataloguing of Cartographic Materials, 1982, Cartographic materials: Amanual of interpretation for AACR2: Chicago, American Library Association.

ASTM Section D18.01.05, various dates, Spatial metadata Content Standard for geographic informationsystems, catalogs, and data exchange (drafts).

Clark, Suzanne, Larsgaard, Mary, and Teague, Cynthia, 1992, Cartographic citations: A style guide: Chicago, American Library Association, Map and Geography Roundtable.

Cogan, Christopher, and Edwards, Thomas, Jr., 1994 (February), Metadata standards for Gap analysis: Moscow, Idaho, Idaho Cooperative Fish and Wildlife Research Unit, University of Idaho.

Department of Commerce, 1975, Tide and Current Glossary, Special Publication 228: Washington,Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Survey.

Department of Commerce, 1989 (January), State Plane Coordinate System of 1983 (National Oceanic andAtmospheric Administration Manual NOS NGS 5): Silver Spring, Maryland, Department of Commerce,National Oceanic and Atmospheric Administration, National Ocean Service, Coast and Geodetic Survey.

Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information ProcessingStandard 173): Washington, Department of Commerce, National Institute of Standards and Technology.

Department of Defense, 1981, Glossary of mapping, charting, and geodetic terms (4th ed.): Washington,Department of Defense, National Imagery and Mapping Agency.

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial Metadata Appendix C, References

73

Department of Defense, 1990, Military specification ARC Digitized Raster Graphics (ADRG)(MIL-A-89007): Philadelphia, Department of Defense, Defense Printing Service Detachment Office.

Department of Defense, 1992, Vector Product Format (MIL-STD-600006): Philadelphia, Department ofDefense, Defense Printing Service Detachment Office.

Dodd, Susan, 1982, Cataloging machine-readable files. Chicago, American Library Association.

Hansen, Wallace, 1991, Suggestions to authors of the reports of the United States Geological Survey(7th ed.): Washington, U.S. Government Printing Office.

Li, Xia, and Crane, Nancy, 1993, Electronic style: A guide to citing electronic information: Westport,Connecticut, Meckler Publishing.

Network Development and MARC Standards Office, 1988, USMARC format for bibliographic data: Washington, Library of Congress, Cataloging Distribution Service.

Network Development and MARC Standards Office, 1988, USMARC code list for relators, sources, anddescription conventions: Washington, Library of Congress, Cataloging Distribution Service.

(no author), 1994, The Government Information Locator Service (GILS): Report to the InformationInfrastructure Task Force (May 2, 1994).

Patrias, Karen, 1991 (April), National Library of Medicine recommended formats for bibliographiccitations: Bethesda, Maryland, U.S. Department of Health and Human Services, Public Health Service,National Institutes of Health, National Library of Medicine.

Snyder, John, 1987, Map projections: A working manual (U.S. Geological Survey Professional Paper1395): Washington, U.S. Government Printing Office.

Westbrook, J. H., and Grattidge, W., 1991, A glossary of terms relating to data, data capture, datamanipulation, and data bases: CODATA Bulletin, v. 23, no. 1-2.

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial MetadataAppendix D, Guidelines for Creating Extended Elements in the Content Standard for Digital GeospatialMetadata

74

Appendix DGuidelines for Creating Extended Elements in the Content Standard for Digital Geospatial Metadata

Extended elements to the Standard may be defined by a data set producer or a user community. Extendedelements are elements outside the Standard, but needed by the data set producer. If extended elements arecreated, they must follow the guidelines presented here. The Online_Linkage data element withinMetadata_Extensions points to a formal document containing the necessary documentation for asubsequent metadata producer to reuse the extended element. If extended elements are used in a profile,the Profile_Name can also be included in the Metadata_Extensions compound data element. SeeAppendix E for Guidelines on Creating a Profile for the Content Standard for Digital GeospatialMetadata.

It should be noted here that metadata capture and exploitation tools need to be updated to adjust to theseminor modifications. At the end of Section 7, Metadata Reference Information, the following elementswere added in order to handle extended elements:

Extended elements may also be created for use with non-geospatial data holdings when this practice doesnot conflict with other Federal standards, directives, or statutes.

Metadata_Extensions=0{Online_Linkage}n +0{Profile_Name}1

If a metadata producer does not have the capability to provide online linkage, he or she may list theinformation in the data set.

The Online Linkage element references a structured file (or uniform resource locator) containing thefollowing information about the extended element in the production rule dictated below: name, data type,domain values, short name, parent element, optionality (Mandatory, Mandatory-if-applicable, orOptional), cardinality, for example, (0, 1, ..., n) or ( > 1 but < 10), repeatability, definition, rationale, andsource. The compound element Extension_Information is repeatable, but the primitive data elementsoccurring in Extension_Information are not. Note that these elements do not appear in the metadatarecord itself.

Extension_Information =Name +Short_Name +Type +[Domain | [0{Child}n | Rule]] +1{Parent}n +(Optionality) +(Repeatability) +(Definition) +(Rationale) +(Source)

The following rules must be followed when defining extended elements:


75

C Extended elements must be formally documented within the hierarchical structure of theStandard (Section 0 - “Metadata”). When metadata extended elements are used, theirexistence must be documented in the Metadata Reference Information, elementMetadata_Extensions. Every effort should be made to logically organize extended elementswithin the existing sections and structure. Where there is no logical or natural “fit”, newsection(s) and/or subsections may be defined.

C Extended elements must not be used to change the name, definition, type, or domain of astandard element. In particular, an extended element cannot be nested under a data element.

C Extended elements may be defined as compound and may include extended and standardelements as components. If a standard element is included in an extended compoundelement, no components of the standard element are changed.

C Extended elements, like the standard element “Single_Date/Time” may appear in multipleplaces in the metadata set.

Extended_Element_Name -- (Mandatory) -- the name of the element. The name given to theelement must not be the name of any other element in the Standard.

Domain: free text (Do not duplicate any other Standard element name.)

Definition -- (Mandatory) -- the definition of the element.Domain: free text

Rationale -- (Optional) -- the reason for creating the Extended element, and its expecteduses.

Domain: free text

Source -- (Mandatory) -- the name of the entity creating the Extended element.Domain: free text

Type -- (Mandatory) -- the kind of value to be provided, or “compound” if the Extendedelement contains other elements.

Domain: integer, real, text, date, time, compound

Domain -- (Mandatory) -- valid values that can be assigned to the data element. The samerules as those for Standard elements are applied here.

Domain: free text

Short Name -- (Mandatory) -- a unique short name consisting of eight alphabetic charactersor less.

Domain: free text (Do not duplicate another short name used by the Standard orany other short name in the Extension Registry.)

Parent -- (Mandatory) -- The name of the element(s) under which this element may appear. The name(s) may be standard or other extended element(s).

Domain: none, free text (Must be the name of an existing standard or extendedelement. If the extended element is not part of any other compound element, its


76

parent is the section name as defined by the Standard. If the extended element isdefining a whole new section, then its parent is Section 0 - “Metadata”.)

Child -- (Mandatory-if-applicable) -- The name of the element(s) which may appear underthis element. The name(s) may be standard or other extended element(s).

Domain: none, free text (Must be the name of an existing Standard or extendedelement.)

Rule: production rule for the element, specified using the form given in this Standard.

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial MetadataAppendix E, Guidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata

77

Appendix EGuidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata

The current Content Standard for Digital Geospatial Metadata provides metadata collectors with formallydefined elements known as standard elements. The metadata Standard attempts to standardize the contentof metadata elements for a wide range of digital geospatial data. However, some users may determine thatmodifications to the Standard are needed to create meaningful metadata for their data sets. The Standardallows the user to create extended elements and profiles. Extended elements are user-defined elementsoutside the Standard needed by the metadata producer. A profile is a document that describes theapplication of the Standard to a specific user community.

A profile always contains the Standard, plus modifications to the optionality or repeatability of non-mandatory elements in the Standard. Modifications to the domains of standard elements can also be madewhere permitted by the Standard. Profiles may also contain extended elements.

Profiles may be formalized through the FGDC standards process or may be used informally by a usercommunity. FGDC is the approval authority for profiles. To become recognized by the FGDC, ametadata profile must go through the FGDC standards review and approval process. FGDC approvedprofiles must specify a maintenance authority. While the FGDC is the designated maintenance authorityfor the Metadata Standard the organization or agency sponsoring a profile will be considered themaintenance authority for that profile.

Profiles may also be created for use with non-geospatial data holdings when this practice does not conflictwith other Federal standards, directives, or statutes.

Requirements

A profile must include:

C the basic, minimum set of metadata collected to the specification of this Standard

C all mandatory elements in all mandatory sections. These are known as the core metadata elements

C all mandatory- if-applicable elements in all mandatory sections, if the data set has thecharacteristic documented in the element

C all mandatory elements in all mandatory-if-applicable sections if the data set has the characteristicdocumented in the section

C all mandatory-if-applicable elements in all mandatory-if-applicable sections, if the data set has thecharacteristic documented in the section

Guidelines

The guidelines for creating a profile follow:

C A profile must not change the name, definition, or data type of a standard element.

C A profile may impose more stringent conditionality on standard elements than the Standardrequires. (Elements that are optional in the Standard may be mandatory in a profile.)

Federal Geographic Data Committee FGDC-STD-001-1998Content Standard for Digital Geospatial MetadataAppendix E, Guidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata

78

C A profile may contain elements with domains that are more restrictive than the Standard. (Elements whose domains have free text in the Standard may have a closed list of appropriatevalues in the profile.)

C A profile may restrict the use of domain values allowed by the Standard. For example, if theStandard contains five domain values for a standard element, the profile may specify that itsdomain consist of three domain values identified in the profile. The profile may require that theuser select a value from the three domain values.)

C A profile will not permit anything not allowed by the Standard. (If the Standard element has adomain of three values, without a free text element, the profile will not allow a user to enteranything other than those 3 values.)

C Before creating a profile, the metadata producer will check existing registered profiles.

C A profile must be made available to anyone receiving metadata that was collected according to thatprofile.

C The profile document submitted to the FGDC for formal approval shall contain the same sixsections as the introduction section of this Standard.

The format of a profile document shall meet the directives of the FGDC Standards WorkingGroup and shall consist of the following:

1. Objectives2. Scope3. Applicability4. Related Standards5. Standards Development Process6. Maintenance Authority7. A section stating that the mandatory elements from the Standard must be

provided.8. A section describing the changes to the domains and conditionality of Standard

elements being modified from their original use in the Standard. Thesechanges should be presented in the same manner used by the Standard.

9. A section describing the extended elements created under this profile. Thissection must include all of the components of an extended element described inthe Standard.

1. Pulau Belanda2. Pulau Bira Besar3. Pulau Bira Kecil4. Pulau Bulat5. Pulau Bundar6. Pulau Cina7. Pulau Dua Barat8. Pulau Dua Timur9. Pulau Genteng Besar10. Pulau Genteng Kecil11. Pulau Gosong Pabelokan12. Pulau Gosong Rengat13. Pulau Hantu Barat/Antuk Barat14. Pulau Hantu Timur/Antuk Timur15. Pulau Harapan16. Pulau Jagung17. Pulau Jukung18. Pulau Kaliage Besar19. Pulau Kaliage Kecil20. Pulau Kelor Timur21. Pulau Kayu Angin Bira22. Pulau Kayu Angin Genteng23. Pulau Kayu Angin Melintang24. Pulau Kayu Angin Putri25. Pulau Kelapa26. Pulau Kelor Barat27. Pulau Kungsi/Kelapa Dua28. Pulau Kuburan Cina29. Pulau Laga30. Pulau Lipan31. Pulau Macan Besar/Matahari32. Pulau Macan Kecil33. Pulau Melinjo34. Pulau Melintang Besar35. Pulau Melintang Kecil36. Pulau Nyamplung37. Pulau Opak Besar Barat38. Pulau Opak Besar Timur39. Pulau Pabelokan40. Pulau Panjang Besar41. Pulau Panjang Kecil42. Pulau Pemagaran43. Pulau Penyaliran Barat44. Pulau Penyaliran Timur45. Pulau Perak

DAFTAR PULAU DI KEPULAUAN SERIBU

DAFTAR PULAU DI KEPULAUAN SERIBU46. Pulau Patetoran Barat/Besar47. Pulau Patetotan Timur/Kecil48. Pulau Putri Barat/Besar49. Pulau Putri Gundul50. Pulau Putri Timur/Kecil51. Pulau Rengit52. Pulau Saktu53. Pulau Sebaru Besar54. Pulau Sebaru Kecil55. Pulau Sebira56. Pulau Semut57. Pulau Semut Kecil58. Pulau Semut Besar59. Pulau Sepa Besar/Barat60. Pulau Sepa Kecil61. Pulau Petondan Besar/Pelangi62. Pulau Petondan Kecil/Timur63. Pulau Tongkeng64. Pulau Yu Besar/Yu Barat65. Pulau Yu Kecil/Yu Timur66. Pulau Ayer67. Pulau Karang Beras68. Pulau Karang Congkak69. Pulau Karang Bongkok70. Pulau Karya71. Pulau Kotok Besar Barat72. Pulau Kotok Kecil73. Pulau Opak Kecil74. Pulau Panggang75. Pulau Paniki76. Pulau Pramuka77. Pulau Sekati78. Pulau Semak Daun79. Pulau Air Besar80. Pulau Air Kecil/Jusi81. Pulau Bidadari82. Pulau Bokor83. Pulau Cipir84. Pulau Damar Besar85. Pulau Damar Kecil/Wanara86. Pulau Dapur87. Pulau Kelor Nesar88. Nirwana (Nyamuk Besar)89. Pulau Nyamuk Kecil/Talak90. Pulau Onrust91. Pulau Rambut

DAFTAR PULAU DI KEPULAUAN SERIBU92. Pulau Ubi Besar93. Pulau Ubi Kecil94. Pulau Untung Jawa95. Pulau Burung96. Pulau Kalang Kudus97. Pulau Kongsi98. Pulau Lancang Kecil99. Pulau Laki100. Pulau Tengah101. Pulau Tidung Kecil102. Pulau Pari103. Pulau Biawak104. Pulau Tikus105. Pulau Gudus Lempeng106. Pulau Payung Kecil107. Pulau Gundul108. Pulau Lancang Besar109. Pulau Payung Besar110. Pulau Tidung Besar

: [01]

(KEADAAN DESEMBER 2007)

Kabupaten/Kota

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA

Propinsi : [31] DKI JAKARTAKEPULAUAN SERIBU

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 PULAU TIDUNG 1

010 KEPULAUAN SERIBU SELATAN

002 PULAU PARI 1

003 PULAU UNTUNG JAWA 1

001 PULAU PANGGANG 1

020 KEPULAUAN SERIBU UTARA

002 PULAU KELAPA 1

003 PULAU HARAPAN 1

435

Catatan: K/P adalah Klasifikasi urban/ruralK = 1 = urbanP = 2 = rural

: [71]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA SELATAN

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 CIPEDAK 1

010 JAGAKARSA

002 SRENGSENG SAWAH 1

003 CIGANJUR 1

004 JAGAKARSA 1

005 LENTENG AGUNG 1

006 TANJUNG BARAT 1

001 CILANDAK TIMUR 1

020 PASAR MINGGU

002 RAGUNAN 1

003 KEBAGUSAN 1

004 PASAR MINGGU 1

005 JATI PADANG 1

006 PEJATEN BARAT 1

007 PEJATEN TIMUR 1

001 LEBAK BULUS 1

030 CILANDAK

002 PONDOK LABU 1

003 CILANDAK BARAT 1

004 GANDARIA SELATAN 1

005 CIPETE SELATAN 1

001 BINTARO 1

040 PESANGGRAHAN

002 PESANGGRAHAN 1

003 ULUJAMI 1

004 PETUKANGAN SELATAN 1

005 PETUKANGAN UTARA 1

001 PONDOK PINANG 1

050 KEBAYORAN LAMA

002 KEBAYORAN LAMA SELATAN 1

003 KEBAYORAN LAMA UTARA 1

004 CIPULIR 1

005 GROGOL SELATAN 1

050 KEBAYORAN LAMA

006 GROGOL UTARA 1

001 GANDARIA UTARA 1

060 KEBAYORAN BARU

002 CIPETE UTARA 1

003 PULO 1

004 PETOGOGAN 1

005 MELAWAI 1

006 KRAMAT PELA 1

007 GUNUNG 1

008 SELONG 1

009 RAWA BARAT 1

010 SENAYAN 1

001 BANGKA 1

070 MAMPANG PRAPATAN

002 PELA MAMPANG 1

003 TEGAL PARANG 1

004 MAMPANG PRAPATAN 1

005 KUNINGAN BARAT 1

001 KALIBATA 1

080 PANCORAN

002 RAWAJATI 1

003 DUREN TIGA 1

004 PANCORAN 1

005 PENGADEGAN 1

006 CIKOKO 1

001 MENTENG DALAM 1

090 TEBET

002 TEBET BARAT 1

003 TEBET TIMUR 1

004 KEBON BARU 1

436


: [71]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA SELATAN

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

005 BUKIT DURI 1

090 TEBET

006 MANGGARAI SELATAN 1

007 MANGGARAI 1

001 KARET SEMANGGI 1

100 SETIA BUDI

002 KUNINGAN TIMUR 1

003 KARET KUNINGAN 1

004 KARET 1

005 MENTENG ATAS 1

006 PASAR MANGGIS 1

007 GUNTUR 1

008 SETIA BUDI 1

437


: [72]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA TIMUR

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 PEKAYON 1

010 PASAR REBO

002 KALISARI 1

003 BARU 1

004 CIJANTUNG 1

005 GEDONG 1

001 CIBUBUR 1

020 CIRACAS

002 KELAPA DUA WETAN 1

003 CIRACAS 1

004 SUSUKAN 1

005 RAMBUTAN 1

001 PONDOK RANGGON 1

030 CIPAYUNG

002 CILANGKAP 1

003 MUNJUL 1

004 CIPAYUNG 1

005 SETU 1

006 BAMBU APUS 1

007 CEGER 1

008 LUBANG BUAYA 1

001 PINANG RANTI 1

040 MAKASAR

002 MAKASAR 1

003 KEBON PALA 1

004 HALIM PERDANA KUSUMAH 1

005 CIPINANG MELAYU 1

001 BALE KAMBANG 1

050 KRAMAT JATI

002 BATU AMPAR 1

003 KAMPUNG TENGAH 1

004 DUKUH 1

005 KRAMAT JATI 1

050 KRAMAT JATI

006 CILILITAN 1

007 CAWANG 1

001 BIDARA CINA 1

060 JATINEGARA

002 CIPINANG CEMPEDAK 1

003 CIPINANG BESAR SELATAN 1

004 CIPINANG MUARA 1

005 CIPINANG BESAR UTARA 1

006 RAWA BUNGA 1

007 BALI MESTER 1

008 KAMPUNG MELAYU 1

001 PONDOK BAMBU 1

070 DUREN SAWIT

002 DUREN SAWIT 1

003 PONDOK KELAPA 1

004 PONDOK KOPI 1

005 MALAKA JAYA 1

006 MALAKA SARI 1

007 KLENDER 1

001 JATINEGARA 1

080 CAKUNG

002 PENGGILINGAN 1

003 PULO GEBANG 1

004 UJUNG MENTENG 1

005 CAKUNG TIMUR 1

006 CAKUNG BARAT 1

007 RAWA TERATE 1

001 PISANGAN TIMUR 1

090 PULO GADUNG

002 CIPINANG 1

438


: [72]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA TIMUR

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

003 JATINEGARA KAUM 1

090 PULO GADUNG

004 JATI 1

005 RAWAMANGUN 1

006 KAYU PUTIH 1

007 PULO GADUNG 1

001 KEBON MANGGIS 1

100 MATRAMAN

002 PAL MERIEM 1

003 PISANGAN BARU 1

004 KAYU MANIS 1

005 UTAN KAYU SELATAN 1

006 UTAN KAYU UTARA 1

439


: [73]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA PUSAT

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 GELORA 1

010 TANAH ABANG

002 BENDUNGAN HILIR 1

003 KARET TENGSIN 1

004 KEBON MELATI 1

005 PETAMBURAN 1

006 KEBON KACANG 1

007 KAMPUNG BALI 1

001 MENTENG 1

020 MENTENG

002 PEGANGSAAN 1

003 CIKINI 1

004 GONDANGDIA 1

005 KEBON SIRIH 1

001 KENARI 1

030 SENEN

002 PASEBAN 1

003 KRAMAT 1

004 KWITANG 1

005 SENEN 1

006 BUNGUR 1

001 JOHAR BARU 1

040 JOHAR BARU

002 KAMPUNG RAWA 1

003 TANAH TINGGI 1

004 GALUR 1

001 RAWA SARI 1

050 CEMPAKA PUTIH

002 CEMPAKA PUTIH TIMUR 1

003 CEMPAKA PUTIH BARAT 1

001 HARAPAN MULYA 1

060 KEMAYORAN

002 CEMPAKA BARU 1

003 SUMUR BATU 1

060 KEMAYORAN

004 SERDANG 1

005 UTAN PANJANG 1

006 KEBON KOSONG 1

007 KEMAYORAN 1

008 GUNUNG SAHARI SELATAN 1

001 PASAR BARU 1

070 SAWAH BESAR

002 GUNUNG SAHARI UTARA 1

003 KARTINI 1

004 KARANG ANYAR 1

005 MANGGA DUA SELATAN 1

001 CIDENG 1

080 GAMBIR

002 PETOJO SELATAN 1

003 GAMBIR 1

004 KEBON KELAPA 1

005 PETOJO UTARA 1

006 DURI PULO 1

440


: [74]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA BARAT

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 JOGLO 1

010 KEMBANGAN

002 SRENGSENG 1

003 MERUYA SELATAN 1

004 MERUYA UTARA 1

005 KEMBANGAN SELATAN 1

006 KEMBANGAN UTARA 1

001 SUKABUMI SELATAN 1

020 KEBON JERUK

002 SUKABUMI UTARA 1

003 KELAPA DUA 1

004 KEBON JERUK 1

005 DURI KEPA 1

006 KEDOYA SELATAN 1

007 KEDOYA UTARA 1

001 PALMERAH 1

030 PALMERAH

002 SLIPI 1

003 KEMANGGISAN 1

004 KOTA BAMBU UTARA 1

005 KOTABAMBU SELATAN 1

006 JATI PULO 1

001 TANJUNG DUREN UTARA 1

040 GROGOL PETAMBURAN

002 TANJUNG DUREN SELATAN 1

003 TOMANG 1

004 GROGOL 1

005 JELAMBAR 1

006 WIJAYA KESUMA 1

007 JELAMBAR BARU 1

001 KALIANYAR 1

050 TAMBORA

002 DURI SELATAN 1

050 TAMBORA

003 TANAH SERAL 1

004 DURI UTARA 1

005 KREDANG 1

006 JEMBATAN BESI 1

007 ANGKE 1

008 JEMBATAN LIMA 1

009 TAMBORA 1

010 ROA MALAKA 1

011 PEKOJAN 1

001 KRUKUT 1

060 TAMAN SARI

002 MAPHAR 1

003 TAMAN SARI 1

004 TANGKI 1

005 MANGGA BESAR 1

006 KEAGUNGAN 1

007 GLODOK 1

008 PINANGSIA 1

001 DURI KOSAMBI 1

070 CENGKARENG

002 RAWA BUAYA 1

003 KEDAUNG KALI ANGKE 1

004 KAPUK 1

005 CENGKARENG TIMUR 1

006 CENGKARENG BARAT 1

001 SEMANAN 1

080 KALI DERES

002 KALIDERES 1

003 PEGADUNGAN 1

004 TEGAL ALUR 1

441


: [74]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA BARAT

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

005 KAMAL 1

080 KALI DERES

442


: [75]


Kabupaten/Kota


Propinsi : [31] DKI JAKARTAJAKARTA UTARA

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 KAMAL MUARA 1

010 PENJARINGAN

002 KAPUK MUARA 1

003 PEJAGALAN 1

004 PENJARINGAN 1

005 PLUIT 1

001 PADEMANGAN BARAT 1

020 PADEMANGAN

002 PADEMANGAN TIMUR 1

003 ANCOL 1

001 SUNTER AGUNG 1

030 TANJUNG PRIOK

002 SUNTER JAYA 1

003 PAPANGO 1

004 WARAKAS 1

005 SUNGAI BAMBU 1

006 KEBON BAWANG 1

007 TANJUNG PRIUK 1

001 RAWABADAK SELATAN 1

040 KOJA

002 TUGU SELATAN 1

003 TUGU UTARA 1

004 LAGOA 1

005 RAWABADAK UTARA 1

006 KOJA 1

001 KELAPA GADING BARAT 1

050 KELAPA GADING

002 KELAPA GADING TIMUR 1

003 PEGANGSAAN DUA 1

001 SUKA PURA 1

060 CILINCING

002 ROROTAN 1

003 MARUNDA 1

004 CILINCING 1

060 CILINCING

005 SEMPER TIMUR 1

006 SEMPER BARAT 1

007 KALI BARU 1

443


: [01]


Kabupaten/Kota


Propinsi : [32] JAWA BARATBOGOR

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 MALASARI 2

010 NANGGUNG

002 BANTAR KARET 2

003 CISARUA 2

004 CURUG BITUNG 2

005 NANGGUNG 2

006 PANGKAL JAYA 2

007 SUKALUYU 2

008 HAMBARO 2

009 KALONG LIUD 2

010 PARAKAN MUNCANG 2

001 PURASARI 2

020 LEUWILIANG

002 PURASEDA 2

003 KARYASARI 2

004 PABANGBON 2

005 KARACAK 2

006 BARENGKOK 1

007 CIBEBER II 2

016 CIBEBER I 1

017 LEUWIMEKAR 1

018 LEUWILIANG 1

019 KAREHKEL 2

001 WANGUN JAYA 2

021 LEUWISADENG

002 SADENGKOLOT 2

003 LEUWISADENG 2

004 SIBANTENG 2

005 BABAKAN SADENG 2

006 SADENG 1

007 KALONG II 2

008 KALONG I 2

001 CIBUNIAN 2

030 PAMIJAHAN

002 PURWABAKTI 2

003 CIASMARA 2

004 CIASIHAN 2

005 GUNUNG SARI 1

006 GUNUNG BUNDER 2 2

007 GUNUNG BUNDER 1 2

008 CIBENING 1

009 GUNUNG PICUNG 2

010 CIBITUNG KULON 2

011 CIBITUNG WETAN 2

012 PAMIJAHAN 1

013 PASAREAN 1

014 GUNUNG MENYAN 1

015 CIMAYANG 1

001 SITU UDIK 2

040 CIBUNGBULANG

002 SITU ILIR 2

003 CIBATOK 2 1

004 CIARUTEN UDIK 2

005 CIBATOK 1 1

006 SUKAMAJU 1

007 CEMPLANG 1

008 GALUGA 1

009 DUKUH 1

010 CIMANGGU 2 1

011 CIMANGGU 1 1

012 GIRIMULYA 1

013 LEUWEUNG KOLOT 1

014 CIARUTEN ILIR 2

015 CIJUJUNG 2

444


: [01]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

004 CIAMPEA UDIK 1

050 CIAMPEA

008 CINANGKA 1

009 CIBUNTU 2

010 CICADAS 1

011 TEGAL WARU 2

012 BOJONG JENGKOL 1

013 CIHIDEUNG UDIK 1

014 CIHIDEUNG ILIR 1

015 CIBANTENG 1

016 BOJONG RANGKAS 1

017 CIBADAK 1

018 BENTENG 1

019 CIAMPEA 1

001 TAPOS 1 2

051 TENJOLAYA

002 GUNUNG MALANG 2

003 TAPOS 2 2

004 SITU DAUN 2

005 CIBITUNG TENGAH 1

006 CINANGNENG 2

001 PURWASARI 2

060 DRAMAGA

002 PETIR 2

003 SUKADAMAI 2

004 SUKAWENING 2

005 NEGLASARI 1

006 SINAR SARI 1

007 CIHERANG 1

008 DRAMAGA 1

009 BABAKAN 1

010 CIKARAWANG 2

009 KOTA BATU 1

070 CIOMAS

010 MEKARJAYA 1

011 PARAKAN 1

012 CIOMAS 1

013 PAGELARAN 1

014 SUKAMAKMUR 1

015 CIAPUS 2

016 SUKAHARJA 2

017 PADASUKA 1

018 CIOMAS RAHAYU 1

019 LALADON 1

001 SUKAJADI 2

071 TAMANSARI

002 SUKALUYU 2

003 SUKAJAYA 2

004 SUKARESMI 2

005 PASIR EURIH 1

006 TAMAN SARI 2

007 SUKAMANTRI 1

008 SIRNAGALIH 1

010 WARUNG MENTENG 1

080 CIJERUK

011 CIJERUK 2

012 CIPELANG 2

013 CIBALUNG 2

014 CIPICUNG 2

015 TANJUNG SARI 2

016 TAJUR HALANG 2

017 PALASARI 2

018 SUKAHARJA 2

001 TUGU JAYA 2

081 CIGOMBONG

445


: [01]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

002 CIGOMBONG 1

081 CIGOMBONG

003 WATES JAYA 1

004 SROGOL 1

005 CIBURUY 1

006 CISALADA 1

007 PASIR JAYA 2

008 CIBURAYUT 2

009 CIADEG 2

001 PASIR BUNCIR 1

090 CARINGIN

002 CINAGARA 2

003 TANGKIL 2

004 PASIR MUNCANG 1

005 MUARA JAYA 1

006 CARINGIN 1

007 LEMAH DUHUR 2

008 CIMANDE 2

009 PANCAWATI 2

010 CIDERUM 1

011 CIHERANG PONDOK 1

012 CIMANDE HILIR 1

001 CILEUNGSI 2

100 CIAWI

002 CITAPEN 2

003 CIBEDUG 1

004 BOJONG MURNI 2

005 JAMBU LUWUK 1

006 BANJAR SARI 1

007 BANJAR WANGI 1

008 BITUNG SARI 1

009 TELUK PINANG 1

010 BANJAR WARU 1

100 CIAWI

011 CIAWI 1

012 BENDUNGAN 1

013 PANDANSARI 1

001 CITEKO 1

110 CISARUA

002 CIBEUREUM 1

003 TUGU SELATAN 1

004 TUGU UTARA 1

005 BATU LAYANG 1

006 CISARUA 1

007 KOPO 1

008 LEUWIMALANG 1

009 JOGJOGAN 1

010 CILEMBER 1

001 SUKARESMI 2

120 MEGAMENDUNG

002 SUKAGALIH 2

003 KUTA 2

004 SUKAKARYA 2

005 SUKAMANAH 1

006 SUKAMAJU 2

007 SUKAMAHI 2

008 GADOG 1

009 CIPAYUNG DATAR 1

010 CIPAYUNG GIRANG 1

011 MEGAMENDUNG 2

001 CIBANON 2

130 SUKARAJA

002 GUNUNG GEULIS 2

003 NAGRAK 2

446


: [01]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

004 SUKATANI 2

130 SUKARAJA

005 SUKARAJA 2

006 CIKEAS 1

007 CADAS NGAMPAR 2

008 PASIRLAJA 1

009 CIJUJUNG 1

010 CIMANDALA 1

011 PASIR JAMBU 1

012 CILEBUT TIMUR 1

013 CILEBUT BARAT 1

001 CIJAYANTI 2

140 BABAKAN MADANG

002 BOJONG KONENG 2

003 KARANG TENGAH 2

004 SUMUR BATU 2

005 BABAKAN MADANG 2

006 CITARINGGUL 1

007 CIPAMBUAN 2

008 KADUMANGU 1

009 SENTUL 1

001 SUKAWANGI 2

150 SUKAMAKMUR

002 SUKAHARJA 2

003 WARGAJAYA 2

004 SIRNAJAYA 2

005 SUKAMULYA 2

006 SUKAMAKMUR 2

007 CIBADAK 2

008 PABUARAN 2

009 SUKADAMAI 1

010 SUKARESMI 2

011 KARYA MEKAR 2

160 CARIU

012 BANTAR KUNING 2

013 CIKUTAMAHI 2

014 CIBATU TIGA 2

015 MEKARWANGI 2

016 TEGAL PANJANG 2

017 CARIU 1

018 KUTA MEKAR 2

019 SUKAJADI 2

020 BABAKAN RADEN 2

001 CIBADAK 2

161 TANJUNGSARI

002 TANJUNG SARI 2

003 SIRNASARI 2

004 SIRNARASA 2

005 BUANAJAYA 2

006 ANTAJAYA 2

007 PASIR TANJUNG 2

008 TANJUNG RASA 2

009 SUKARASA 2

010 SELAWANGI 2

001 SUKAJAYA 2

170 JONGGOL

002 SUKANEGARA 2

003 CIBODAS 2

004 SINGASARI 2

005 SINGAJAYA 1

006 SUKASIRNA 2

007 BALEKAMBANG 2

008 BENDUNGAN 2

009 SIRNAGALIH 2

447


: [01]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

010 JONGGOL 1

170 JONGGOL

011 SUKAMAJU 1

012 SUKAMANAH 2

013 WENINGGALIH 2

014 SUKAGALIH 2

010 DAYEUH 1

180 CILEUNGSI

011 MAMPIR 1

012 SETU SARI 1

013 CIPEUCANG 1

014 JATISARI 2

015 GANDOANG 1

016 MEKARSARI 1

017 CILEUNGSI KIDUL 1

018 CILEUNGSI 1

019 LIMUS NUNGGAL 1

020 PASIR ANGIN 1

021 CIPENJO 1

001 LEUWIKARET 1

181 KELAPA NUNGGAL

002 LULUT 2

003 BANTAR JATI 2

004 NAMBO 1

005 KEMBANG KUNING 1

006 KELAPA NUNGGAL 2

007 LIGARMUKTI 2

008 BOJONG 1

009 CIKAHURIPAN 2

001 KARANGGAN 1

190 GUNUNG PUTRI

002 GUNUNG PUTRI 1

003 TLAJUNG UDIK 1

190 GUNUNG PUTRI

004 BOJONG NANGKA 1

005 CICADAS 1

006 WANAHERANG 1

007 CIKEAS UDIK 1

008 NAGRAK 1

009 CIANGSANA 1

010 BOJONG KULUR 1

001 TANGKIL 2

200 CITEUREUP

002 HAMBALANG 2

003 TAJUR 1

004 PASIR MUKTI 2

005 SUKAHATI 2

006 LEUWINUTUG 1

007 SANJA 1

008 KARANG ASEM BARAT 1

009 KARANG ASEM TIMUR 1

010 TARIKOLOT 1

011 GUNUNG SARI 1

012 CITEUREUP 1

013 PUSPANEGARA 1

014 PUSPASARI 1

001 KARADENAN 1

210 CIBINONG

002 NANGGEWER 1

003 NANGGEWER MEKAR 1

004 CIBINONG 1

005 PAKANSARI 1

006 SUKAHATI 1

007 TENGAH 1

448


: [01]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

008 PONDOK RAJEG 1

210 CIBINONG

009 HARAPAN JAYA 1

010 PABUARAN 1

011 CIRIMEKAR 1

012 CIRIUNG 1

002 CIMANGGIS 1

220 BOJONG GEDE

003 WARINGIN JAYA 1

004 KEDUNG WARINGIN 1

005 BOJONG GEDE 1

011 SUSUKAN 1

012 BOJONG BARU 1

013 RAWA PANJANG 1

014 PABUARAN 1

015 RAGAJAYA 2

001 TONJONG 1

221 TAJURHALANG

002 TAJUR HALANG 1

003 SUKMAJAYA 1

004 NANGGERANG 2

005 SASAK PANJANG 1

006 KALISUREN 1

007 CITAYAM 1

006 SEMPLAK BARAT 1

230 KEMANG

007 ATANG SENJAYA 1

008 PARAKAN JAYA 1

009 BOJONG 2

010 KEMANG 1

011 PABUARAN 2

013 TEGAL 2

014 PONDOK UDIK 1

230 KEMANG

015 JAMPANG 1

001 MEKARSARI 2

231 RANCA BUNGUR

002 RANCA BUNGUR 1

003 PASIR GAOK 1

004 BANTARJAYA 1

005 BANTAR SARI 1

006 CANDALI 2

009 IWUL 2

240 PARUNG

010 JABON MEKAR 1

011 PAMAGER SARI 1

012 PARUNG 1

013 WARU 1

014 WARUJAYA 1

015 BOJONG SEMPU 1

016 BOJONG INDAH 1

017 COGREG 1

001 KARIHKIL 2

241 CISEENG

002 CIBEUTEUNG UDIK 2

003 BABAKAN 2

004 PUTAT NUTUG 2

005 CIBEUTEUNG MUARA 2

006 CIBENTANG 1

007 PARIGI MEKAR 1

008 CISEENG 1

009 CIHOE 2

010 KURIPAN 2

001 JAMPANG 2

250 GUNUNG SINDUR

449


: [01]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

002 CIBADUNG 1

250 GUNUNG SINDUR

003 CIBINONG 1

004 CIDOKOM 2

005 PADURENAN 2

006 CURUG 2

007 RAWAKALONG 1

008 PENGASINAN 1

009 GUNUNG SINDUR 1

010 PABUARAN 2

001 LEUWIBATU 2

260 RUMPIN

002 CIDOKOM 2

003 GOBANG 2

004 RABAK 2

005 CIBODAS 2

006 KAMPUNG SAWAH 2

007 RUMPIN 2

008 CIPINANG 2

009 SUKASARI 2

010 KERTAJAYA 2

011 TAMAN SARI 1

012 SUKAMULYA 1

013 MEKAR SARI 2

006 SUKARAKSA 2

270 CIGUDEG

009 SUKAMAJU 2

010 CIGUDEG 2

011 BANYU RESMI 2

012 WARGAJAYA 2

013 BUNAR 2

014 MEKARJAYA 2

015 CINTAMANIK 2

270 CIGUDEG

016 BANYU WANGI 2

017 BANYU ASIH 2

018 TEGALEGA 2

019 BATU JAJAR 2

020 RENGASJAJAR 2

021 BANGUNJAYA 2

022 ARGAPURA 2

001 CISARUA 2

271 SUKAJAYA

002 KIARASARI 2

003 KIARAPANDAK 2

004 HARKATJAYA 2

005 SUKAJAYA 2

006 SIPAYUNG 2

007 SUKAMULIH 2

008 PASIR MADANG 2

009 CILEUKSA 2

003 PANGRADIN 2

280 JASINGA

004 KALONGSAWAH 1

005 SIPAK 1

006 PAMAGERSARI 1

007 JUGALA JAYA 2

008 CURUG 2

009 TEGAL WANGI 2

010 KOLEANG 2

011 JASINGA 1

012 SETU 1

013 CIKOPOMAYAK 2

014 NEGLASARI 2

450


: [01]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

015 BAGOANG 2

280 JASINGA

016 BARENGKOK 2

017 PANGAUR 2

001 CIOMAS 2

290 TENJO

002 TAPOS 2

003 BATOK 2

004 BABAKAN 2

005 BOJONG 2

006 SINGABRAJA 2

007 TENJO 1

008 CILAKU 2

009 SINGABANGSA 2

001 JAGABAYA 2

300 PARUNG PANJANG

002 GOROWONG 2

003 DAGO 2

004 CIKUDA 2

005 PINGKU 2

006 LUMPANG 2

007 GINTUNG CILEJET 2

008 JAGABITA 2

009 CIBUNAR 2

010 PARUNG PANJANG 1

011 KABASIRAN 1

451


: [03]


Kabupaten/Kota


Propinsi : [32] JAWA BARATCIANJUR

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 SINARLAUT 2

010 AGRABINTA

002 BOJONGKASO 2

003 SUKAMANAH 2

004 WANASARI 2

007 KARANGSARI 2

008 NEGLASARI 2

009 MULYASARI 2

010 BUNISARI 2

012 TANJUNGSARI 2

001 PUSAKASARI 2

011 LELES

002 NAGASARI 2

003 SUKAJAYA 2

004 SUKAMULYA 2

005 PURABAYA 2

006 SUKASIRNA 2

007 WALAHIR 2

008 PUNCAKWANGI 2

009 SIRNASARI 2

010 KARYAMUKTI 2

011 MANDALAWANGI 2

001 HEGARSARI 2

020 SINDANGBARANG

002 JATISARI 2

003 KERTASARI 2

004 TALAGASARI 2

005 SIRNAGALIH 2

006 SAGANTEN 2

007 JAYAGIRI 2

008 MUARACIKADU 2

009 GIRIMUKTI 2

001 KARYABAKTI 2

030 CIDAUN

002 SUKAPURA 2

003 CISALAK 2

004 JAYAPURA 2

005 KERTAJADI 2

006 CIDAMAR 2

007 KARANGWANGI 2

008 CIMARAGANG 2

009 GELARPAWITAN 2

010 NEGLASARI 2

011 CIBULUH 2

012 PUNCAKBARU 2

013 MEKARJAYA 2

001 CINERANG 2

040 NARINGGUL

002 WANGUNJAYA 2

003 MEKARSARI 2

004 WANGUNSARI 2

005 MALATI 2

006 SUKAMULYA 2

007 NARINGGUL 2

008 WANASARI 2

009 SUKABAKTI 2

010 BALEGEDE 2

001 PANYINDANGAN 2

050 CIBINONG

002 WARGALUYU 2

003 HAMERANG 2

004 PANANGGAPAN 2

005 GIRIJAYA 2

006 SUKAJADI 2

459


: [03]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

007 SUKAMEKAR 2

050 CIBINONG

008 BATULAWANG 2

009 CIKANGKARENG 2

015 PAMOYANAN 2

016 CIMASKARA 2

020 PADASUKA 2

021 MEKARMUKTI 2

001 PADALUYU 2

051 CIKADU

002 SUKALUYU 2

003 MEKARLAKSANA 2

004 CIKADU 2

005 KALAPANUNGGAL 2

006 MEKARWANGI 2

007 CISARANTEN 2

008 SUKAMULYA 2

009 MEKARJAYA 2

001 KARANGTENGAH 2

060 TANGGEUNG

002 RAWAGEDE 2

003 SUKAJAYA 2

004 TANGGEUNG 1

005 KERTAJAYA 2

006 SIRNAJAYA 2

007 PASIR JAMBU 2

008 CILONGSONG 2

009 MARGALUYU 2

010 PAGERMANEUH 2

011 BOJONGPETIR 2

012 PADALUYU 2

013 MEKARMULYA 2

014 KUBANG 2

060 TANGGEUNG

015 GIRIJAYA 2

016 GIRIMUKTI 2

010 PASIRDALEM 2

070 KADUPANDAK

011 SUKARAJA 2

012 KADUPANDAK 2

013 TALAGASARI 2

014 NEGLASARI 2

015 SUKAKERTA 2

016 SUKARAHARJA 2

017 BOJONGKASIH 2

018 SUKASARI 2

019 WARGASARI 2

020 WARGAASIH 2

021 SUKARESMI 2

022 GANDASARI 2

001 PADAASIH 2

071 CIJATI

002 SUKALUYU 2

003 SINARBAKTI 2

004 BOJONGLARANG 2

005 SUKAMAHI 2

006 CIJATI 2

007 CIBODAS 2

008 CARINGIN 2

009 PARAKANTUGU 2

001 WARINGINSARI 2

080 TAKOKAK

002 SUKAGALIH 2

003 SIMPANG 2

460


: [03]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

004 SINDANGHAYU 2

080 TAKOKAK

005 SINDANGRESMI 2

006 BUNGBANGSARI 2

007 CISUJEN 2

008 PASAWAHAN 2

009 HEGARMANAH 2

001 JAYAGIRI 2

090 SUKANAGARA

002 CIGUHA 2

003 SUKAKARYA 2

004 SUKARAME 2

005 SUKALAKSANA 2

006 SUKANAGARA 1

007 GUNUNGSARI 2

008 SINDANGSARI 2

009 SUKAJEMBAR 2

010 SUKAMEKAR 2

001 KERTARAHARJA 2

100 PAGELARAN

002 PAGELARAN 2

003 PADAMAJU 2

004 SIMPANG 2

005 KALIBARU 2

006 PUSAKAJAYA 2

007 KARANGJAYA 2

008 BUNIWANGI 2

009 BUNIJAYA 2

010 PANGADEGAN 2

011 SITUHIANG 2

012 PASIRBARU 2

013 SINDANGKERTA 2

014 KARANGHARJA 2

100 PAGELARAN

015 SELAGEDANG 2

016 GELAR ANYAR 2

017 MEKARSARI 2

001 WANGUNJAYA 2

110 CAMPAKA

002 SUKADANA 2

003 KARYAMUKTI 2

004 CIMENTENG 2

005 GIRIMUKTI 2

006 SUSUKAN 2

007 SUKAJADI 2

008 MARGALUYU 2

009 MEKARJAYA 2

010 CIDADAP 2

011 CAMPAKA 2

001 CAMPAKAWARNA 2

111 CAMPAKA MULYA

002 CAMPAKAMULYA 2

003 SUKABUNGAH 2

004 CIBANGGALA 2

005 SUKASIRNA 2

001 CIBOKOR 1

120 CIBEBER

002 KANOMAN 2

003 CIPETIR 1

004 CIKONDANG 1

005 CIHAUR 2

006 SUKAMANAH 2

007 SALAGEDANG 2

008 CIBADAK 2

461


: [03]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

009 GIRIMULYA 2

120 CIBEBER

010 CIMANGGU 2

011 CISALAK 2

012 MAYAK 2

013 PEUTEUYCONDONG 2

014 SUKARAHARJA 2

015 SUKAMAJU 2

016 CIBAREGBEG 2

017 KARANGNUNGGAL 2

018 SALAMNUNGGAL 2

002 CISARANDI 2

130 WARUNGKONDANG

003 SUKAMULYA 2

004 CIKAROYA 1

012 JAMBUDIPA 1

013 MEKARWANGI 2

014 TEGALLEGA 2

015 BUNIKASIH 2

016 BUNISARI 2

017 CIEUNDEUR 2

018 CIWALEN 2

019 SUKAWANGI 2

001 CINTAASIH 2

131 GEKBRONG

002 CIKANCANA 2

003 SUKARATU 2

004 CIKAHURIPAN 2

005 GEKBRONG 2

006 KEBONPEUTEUY 2

007 SONGGOM 2

008 BANGBAYANG 2

001 SUKASARI 2

140 CILAKU

002 SUKAKERTA 2

003 SINDANGSARI 2

004 MULYASARI 2

005 CIHARASHAS 2

006 CIBINONG HILIR 2

007 SIRNAGALIH 1

008 RAHONG 2

009 MUNJUL 2

010 RANCAGOONG 2

001 MEKARJAYA 2

150 SUKALUYU

002 PANYUSUHAN 2

003 SUKALUYU 2

004 SUKAMULYA 2

005 BABAKANSARI 2

006 TANJUNGSARI 2

007 SELAJAMBE 2

008 HEGARMANAH 1

009 SUKASIRNA 2

010 SINDANGRAJA 2

001 SUKARAMA 2

160 BOJONGPICUNG

002 SUKAJAYA 2

003 CIKONDANG 2

004 JATISARI 2

005 KEMANG 2

006 CIBARENGKOK 2

007 JATI 2

008 BOJONGPICUNG 1

009 SUKARATU 2

462


: [03]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

010 CIHEA 2

160 BOJONGPICUNG

011 MEKARWANGI 2

012 NEGLASARI 1

013 HEGARMANAH 1

014 RAMASARI 2

015 HAURWANGI 1

016 KERTASARI 2

001 KERTAMUKTI 2

170 CIRANJANG

002 CIPEUYEUM 2

003 MEKARWANGI 2

004 KARANGWANGI 2

005 GUNUNGSARI 2

006 KERTAJAYA 2

007 SINDANGJAYA 2

008 SINDANGSARI 2

009 CIBIUK 1

010 MEKARGALIH 1

011 CIRANJANG 1

012 NANGGALAMEKAR 2

001 MEKARJAYA 2

180 MANDE

002 LEUWIKOJA 2

003 KUTAWARINGIN 2

004 SUKAMANAH 2

005 CIANDAM 2

006 JAMALI 2

007 KADEMANGAN 1

008 MULYASARI 2

009 BOBOJONG 2

010 CIKIDANGBAYABANG 2

011 MURNISARI 2

180 MANDE

012 MANDE 2

001 SUKAMANAH 2

190 KARANGTENGAH

002 SINDANGASIH 2

003 LANGENSARI 2

004 SUKASARI 1

005 MALEBER 1

006 SABANDAR 1

007 BOJONG 1

008 HEGARMANAH 2

009 BABAKANCARINGIN 2

010 CIHERANG 2

011 SUKAJADI 2

012 SUKASARANA 2

013 SUKAMANTRI 2

014 SUKAMULYA 2

015 SINDANGLAKA 1

016 SUKATARIS 1

001 NAGRAK 1

200 CIANJUR

002 SUKAMAJU 2

003 SAYANG 1

004 SOLOKPANDAN 1

005 MUKA 1

006 BOJONGHERANG 1

007 PAMOYANAN 1

008 SAWAH GEDE 1

009 LIMBANGAN SARI 1

010 MEKARSARI 1

011 BABAKANKARET 2

463


: [03]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 PADALUYU 2

210 CUGENANG

002 SUKAJAYA 2

003 CIBULAKAN 2

004 CIRUMPUT 2

005 TALAGA 2

006 BENJOT 2

007 GASOL 2

008 SARAMPAD 2

009 MANGUNKERTA 2

010 SUKAMULYA 2

011 GALUDRA 2

012 NYALINDUNG 2

013 CIBEUREUM 2

014 CIJEDIL 2

015 SUKAMANAH 2

016 WANGUNJAYA 2

001 CIPUTRI 2

220 PACET

002 CIHERANG 1

003 CIPENDAWA 1

004 CIBODAS 2

005 GADOG 1

008 SUKATANI 1

014 SUKANAGALIH 1

002 CIPANAS 1

221 CIPANAS

003 SINDANGLAYA 1

004 PALASARI 1

005 CIMACAN 1

006 CILOTO 1

007 BATULAWANG 2

009 SINDANGJAYA 1

221 CIPANAS

001 PAKUON 2

230 SUKARESMI

002 CIKANYERE 2

003 SUKARESMI 2

004 CIWALEN 2

005 KAWUNGLUWUK 1

006 CIBADAK 1

007 RAWABELUT 2

008 CIBANTENG 2

009 KUBANG 2

010 SUKAMAHI 2

011 CIKANCANA 2

001 PADAJAYA 2

240 CIKALONGKULON

002 CINANGSI 2

003 MENTENGSARI 2

004 GUDANG 2

005 SUKAGALIH 1

006 MAJALAYA 2

007 CIJAGANG 2

008 MEKARJAYA 2

009 MEKAR SARI 2

010 SUKAMULYA 2

011 MEKARGALIH 2

012 NEGLASARI 2

013 LEMBAHSARI 2

014 WARUDOYONG 2

015 KAMURANG 2

016 CIRAMA GIRANG 2

017 MEKAR MULYA 2

464


: [03]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

018 CIGUNUNGHERANG 2

240 CIKALONGKULON

465


: [16]


Kabupaten/Kota


Propinsi : [32] JAWA BARATBEKASI

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 RAGEMANUNGGAL 2

010 SETU

002 MUKTIJAYA 2

003 KERTARAHAYU 2

004 CIKARAGEMAN 2

005 TAMAN SARI 2

006 TAMAN RAHAYU 2

007 BURANGKENG 2

008 CILEDUK 2

009 CIBENING 2

012 CIJENGKOL 2

013 LUBANGBUAYA 2

001 JAYAMULYA 2

021 SERANG BARU

002 SUKARAGAM 2

003 SIRNAJAYA 2

004 NAGACIPTA 2

005 NAGASARI 2

006 CILANGKARA 2

007 SUKASARI 2

008 JAYASAMPURNA 2

001 CICAU 2

022 CIKARANG PUSAT

002 SUKAMAHI 2

003 PASIRPANJI 2

004 PASIRTANJUNG 2

005 HEGARMUKTI 2

006 JAYAMUKTI 1

001 SUKASEJATI 2

023 CIKARANG SELATAN

002 CIANTRA 2

003 SUKADAMI 1

004 SERANG 1

023 CIKARANG SELATAN

005 SUKARESMI 1

006 CIBATU 1

007 PASIRSARI 1

001 CIBARUSAHJAYA 1

030 CIBARUSAH

002 CIBARUSAHKOTA 1

003 SINDANGMULYA 1

004 WIBAWAMULYA 2

005 SIRNAJATI 2

006 RIDOGALIH 2

007 RIDOMANAH 2

001 KARANGINDAH 2

031 BOJONGMANGU

002 KARANGMULYA 2

003 BOJONGMANGU 2

004 MEDALKRISNA 2

005 SUKAMUKTI 2

006 SUKABUNGAH 2

001 SERTAJAYA 1

041 CIKARANG TIMUR

002 HEGARMANAH 2

003 CIPAYUNG 2

004 JATIREJA 1

005 JATIBARU 2

006 TANJUNGBARU 1

007 LABANSARI 2

008 KARANGSARI 2

002 BOJONGSARI 1

050 KEDUNGWARINGIN

003 KEDUNGWARINGIN 1

540


: [16]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

004 WARINGINJAYA 2

050 KEDUNGWARINGIN

005 KARANGSAMBUNG 2

007 KARANGHARUM 2

008 MEKARJAYA 2

009 KARANGMEKAR 2

001 WANGUNHARJA 1

061 CIKARANG UTARA

002 HARJAMEKAR 1

003 PASIRGOMBONG 1

004 MEKARMUKTI 1

005 SIMPANGAN 1

006 TANJUNGSARI 1

007 CIKARANG KOTA 1

008 KARANGBARU 1

009 KARANGASIH 1

010 KARANGRAHARJA 1

011 WALUYA 1

001 SUKARAYA 1

062 KARANGBAHAGIA

002 KARANGRAHAYU 2

003 KARANGSETIA 2

004 KARANGSATU 2

005 KARANGMUKTI 2

006 KARANGANYAR 2

007 KARANGBAHAGIA 2

008 KARANGSENTOSA 2

006 CIBUNTU 1

070 CIBITUNG

013 WANASARI 1

014 WANAJAYA 2

015 SUKAJAYA 1

016 KERTAMUKTI 2

070 CIBITUNG

017 MUKTIWARI 2

018 SARIMUKTI 2

001 TELAJUNG 1

071 CIKARANG BARAT

002 CIKEDOKAN 2

003 JATIWANGI 1

004 MEKARWANGI 1

005 GANDAMEKAR 1

006 DANAUINDAH 1

007 GANDASARI 1

008 SUKADANAU 1

009 TELAGA ASIH 1

010 TELAGAMURNI 1

011 KALIJAYA 1

001 JATIMULYA 1

081 TAMBUN SELATAN

002 LAMBANGSARI 1

003 LAMBANGJAYA 1

004 TAMBUN 1

005 SETIADARMA 1

006 SETIAMEKAR 1

007 MEKARSARI 1

008 TRIDAYASAKTI 1

009 MANGUNJAYA 1

010 SUMBERJAYA 1

001 KARANGSATRIA 1

082 TAMBUN UTARA

002 SATRIAJAYA 2

003 JALENJAYA 2

004 SATRIAMEKAR 2

541


: [16]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

005 SRIAMUR 1

082 TAMBUN UTARA

006 SRIMUKTI 2

007 SRIJAYA 2

008 SRIMAHI 2

001 BAHAGIA 1

090 BABELAN

002 KEBALEN 1

003 BABELAN KOTA 1

004 KEDUNGPENGAWAS 1

005 KEDUNGJAYA 2

006 BUNIBAKTI 2

007 MUARABAKTI 2

008 PANTAI HURIP 2

009 HURIPJAYA 2

001 PUSAKARAKYAT 2

100 TARUMAJAYA

002 SETIA ASIH 1

003 PAHLAWAN SETIA 2

004 SETIAMULYA 2

005 SEGARAMAKMUR 1

006 PANTAIMAKMUR 1

007 SEGARAJAYA 2

008 SAMUDRAJAYA 2

003 SUKAMAJU 2

110 TAMBELANG

004 SUKARAJA 2

005 SUKARAPIH 2

006 SUKARAHAYU 2

007 SUKABAKTI 2

008 SUKAWIJAYA 2

009 SUKAMANTRI 2

001 SUKAMEKAR 2

111 SUKAWANGI

002 SUKADAYA 2

003 SUKABUDI 1

004 SUKAWANGI 2

005 SUKAKERTA 2

006 SUKARINGIN 2

007 SUKATENANG 2

001 SUKAASIH 2

120 SUKATANI

002 SUKARUKUN 1

003 BANJARSARI 2

004 SUKAHURIP 2

005 SUKAMANAH 2

006 SUKAMULYA 1

007 SUKADARMA 1

001 SUKAJADI 2

121 SUKAKARYA

002 SUKAMAKMUR 2

003 SUKALAKSANA 2

004 SUKAKERSA 2

005 SUKAKARYA 2

006 SUKAINDAH 2

007 SUKAMURNI 2

001 BANTARSARI 2

130 PEBAYURAN

002 BANTARJAYA 1

003 KERTASARI 1

004 KERTAJAYA 2

005 KARANGHAUR 2

006 KARANGPATRI 2

007 KARANGREJA 2

542


: [16]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

008 KARANGJAYA 2

130 PEBAYURAN

009 SUMBERSARI 2

010 SUMBERREJA 2

011 SUMBERURIP 2

012 KARANGSEGAR 2

013 KARANGHARJA 2

001 JAYABAKTI 2

140 CABANGBUNGIN

002 SINDANGJAYA 2

003 SINDANGSARI 2

004 JAYALAKSANA 2

005 SETIALAKSANA 2

006 LENGGAHJAYA 2

007 SETIAJAYA 2

008 LENGGAHSARI 2

001 PANTAI HARAPANJAYA 2

150 MUARA GEMBONG

002 PANTAIMEKAR 1

003 PANTAI SEDERHANA 2

004 PANTAIBAKTI 2

005 PANTAIBAHAGIA 2

006 JAYASAKTI 2

543


: [71]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 MULYAHARJA 1

010 BOGOR SELATAN

002 PAMOYANAN 1

003 RANGGAMEKAR 1

004 GENTENG 1

005 KERTAMAYA 2

006 RANCAMAYA 1

007 BOJONGKERTA 1

008 HARJASARI 1

009 MUARASARI 1

010 PAKUAN 1

011 CIPAKU 1

012 LAWANGGINTUNG 1

013 BATUTULIS 1

014 BONDONGAN 1

015 EMPANG 1

016 CIKARET 1

001 SINDANGSARI 1

020 BOGOR TIMUR

002 SINDANGRASA 1

003 TAJUR 1

004 KATULAMPA 1

005 BARANANGSIANG 1

006 SUKASARI 1

001 BANTARJATI 1

030 BOGOR UTARA

002 TEGALGUNDIL 1

003 TANAHBARU 1

004 CIMAHPAR 1

005 CILUAR 1

006 CIBULUH 1

007 KEDUNGHALANG 1

008 CIPARIGI 1

030 BOGOR UTARA

001 PALEDANG 1

040 BOGOR TENGAH

002 GUDANG 1

003 BABAKANPASAR 1

004 TEGALLEGA 1

005 BABAKAN 1

006 SEMPUR 1

007 PABATON 1

008 CIBOGOR 1

009 PANARAGAN 1

010 KEBONKELAPA 1

011 CIWARINGIN 1

001 PASIRMULYA 1

050 BOGOR BARAT

002 PASIRKUDA 1

003 PASIRJAYA 1

004 GUNUNGBATU 1

005 LOJI 1

006 MENTENG 1

007 CILENDEK TIMUR 1

008 CILENDEK BARAT 1

009 SINDANGBARANG 1

010 MARGAJAYA 1

011 BALUNGBANG JAYA 1

012 SITUGEDE 1

013 BUBULAK 1

014 SEMPLAK 1

015 CURUGMEKAR 1

016 CURUG 1

001 KEDUNGWARINGIN 1

060 TANAH SEREAL

547


: [71]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

002 KEDUNGJAYA 1

060 TANAH SEREAL

003 KEBONPEDES 1

004 TANAHSAREAL 1

005 KEDUNGBADAK 1

006 SUKARESMI 1

007 SUKADAMAI 1

008 CIBADAK 1

009 KAYUMANIS 1

010 MEKARWANGI 1

011 KENCANA 1

548


: [75]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

008 JATIMAKMUR 1

010 PONDOKGEDE

009 JATIWARINGIN 1

010 JATIBENING 1

011 JATICEMPAKA 1

012 JATIBENING BARU 1

001 JATIKARYA 2

011 JATISAMPURNA

002 JATISAMPURNA 1

003 JATIRANGGA 1

004 JATIRANGGON 1

006 JATI RADEN 1

001 JATIMURNI 1

012 PONDOK MELATI

002 JATIMELATI 1

003 JATIWARNA 1

004 JATIRAHAYU 1

001 JATISARI 1

020 JATIASIH

002 JATILUHUR 1

003 JATIRASA 1

004 JATIASIH 1

005 JATIMEKAR 1

006 JATIKRAMAT 1

001 CIKETINGUDIK 2

030 BANTARGEBANG

002 SUMUR BATU 2

003 CIKIWUL 1

004 BANTARGEBANG 1

001 PADURENAN 1

031 MUSTIKA JAYA

002 CIMUNING 1

003 MUSTIKA JAYA 1

004 MUSTIKA SARI 2

031 MUSTIKA JAYA

005 MARGAHAYU 1

040 BEKASI TIMUR

006 BEKASI JAYA 1

007 DUREN JAYA 1

008 AREN JAYA 1

001 BOJONG MENTENG 1

041 RAWALUMBU

002 BOJONG RAWALUMBU 1

003 SEPANJANG JAYA 1

004 PENGASINAN 1

001 JAKA MULYA 1

050 BEKASI SELATAN

002 JAKA SETIA 1

003 PEKAYON JAYA 1

004 MARGA JAYA 1

007 KAYURINGIN JAYA 1

001 BINTARA JAYA 1

060 BEKASI BARAT

002 BINTARA 1

003 KRANJI 1

005 KOTA BARU 1

008 JAKA SAMPURNA 1

001 HARAPAN MULYA 1

061 MEDAN SATRIA

002 KALI BARU 1

003 MEDAN SATRIA 1

004 PEJUANG 1

001 HARAPAN JAYA 1

070 BEKASI UTARA

002 KALIABANG TENGAH 1

003 PERWIRA 1

554


: [75]


Kabupaten/Kota



KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

004 HARAPAN BARU 1

070 BEKASI UTARA

005 TELUK PUCUNG 1

006 MARGA MULYA 1

555


: [76]


Kabupaten/Kota


Propinsi : [32] JAWA BARATDEPOK

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

001 DUREN MEKAR 1

010 SAWANGAN

002 DUREN SERIBU 1

003 PENGASINAN 1

004 BEDAHAN 2

005 PASIR PUTIH 2

006 SAWANGAN BARU 1

007 SAWANGAN LAMA 1

008 BOJONGSARI LAMA 1

009 BOJONGSARI BARU 1

010 CURUG 1

011 PONDOK PETIR 1

012 SERUA 1

013 KEDAUNG 1

014 CINANGKA 1

001 CIPAYUNG JAYA 1

020 PANCORAN MAS

002 BOJONG PONDOK TERONG 1

003 PONDOK JAYA 1

004 RATUJAYA 1

005 CIPAYUNG 1

006 RANGKAPAN JAYA BARU 1

007 RANGKAPAN JAYA 1

008 MAMPANG 1

009 PANCORAN MAS 1

010 DEPOK JAYA 1

011 DEPOK 1

001 KALIMULYA 1

030 SUKMA JAYA

002 JATIMULYA 1

003 KALIBARU 1

004 CILODONG 1

005 SUKAMAJU 1

030 SUKMA JAYA

006 SUKMAJAYA 1

007 TIRTAJAYA 1

008 MEKAR JAYA 1

009 ABADIJAYA 1

010 BAKTI JAYA 1

011 CISALAK 1

001 CILANGKAP 1

040 CIMANGGIS

002 CIMPAEUN 1

003 TAPOS 1

004 LEUWINAGGUNG 1

005 JATIJAJAR 1

006 SUKAMAJU BARU 1

007 CURUG 1

008 SUKATANI 1

009 HARJAMUKTI 1

010 CISALAK PASAR 1

011 MEKARSARI 1

012 TUGU 1

013 PASIR GUNUNG SELATAN 1

001 BEJI 1

050 BEJI

002 BEJI TIMUR 1

003 KEMIRIMUKA 1

004 PONDOK CINA 1

005 KUKUSAN 1

006 TANAH BARU 1

001 MERUYUNG 1

060 LIMO

002 GROGOL 1

556


: [76]


Kabupaten/Kota


Propinsi : [32] JAWA BARATDEPOK

KECAMATAN

DESA / KELURAHANK/P

KECAMATAN

DESA / KELURAHANK/P

003 KRUKUT 1

060 LIMO

004 LIMO 1

005 CINERE 1

006 GANDUL 1

007 PANGKALANJATI BARU 1

008 PANGKALANJATI 1

557


Dibuat 2 rangkap : 1. BPS Kabupaten/Kota (Pita Oranye) 2. Desa/Kelurahan (Biru)

REPUBLIK INDONESIA BADAN PUSAT STATISTIK

SENSUS EKONOMI 2006 PENDATAAN POTENSI DESA/KELURAHAN

Rahasia SE2006-PODES

I. PENGENALAN TEMPAT

NO. RINCIAN Kode (Desember 2004)

Kode (Saat Pencacahan)

101 Provinsi

102 Kabupaten/Kota *)

103 Kecamatan

104 Desa/Kelurahan*)

105 Daerah Perkotaan - 1 Perdesaan - 2

106 Potensi ekonomi desa/kelurahan yang paling menonjol dan sudah diberdayakan

Pertanian - 1 Pertambangan dan penggalian - 2 Industri pengolahan - 3 Listrik, Gas, Air Minum - 4 Konstruksi - 5

Perdagangan - 6 Angkutan - 7 Lembaga Keuangan - 8 Jasa - 9 Tidak punya -10

II. KETERANGAN PETUGAS

NO. RINCIAN PENCACAH PENGAWAS/PEMERIKSA

201 Nama Petugas

202 NIP

203 Tanggal Pengisian/Pemeriksaan

204 Tanda Tangan

*) Coret yang tidak sesuai …………………, ………………… 2005

Mengetahui Kepala Desa/Lurah

Nama dan Cap Desa/Kelurahan

DAFTAR INI TIDAK DIPERKENANKAN DIISI LANGSUNG OLEH PERANGKAT DESA/KELURAHAN DAN NARA SUMBER LAINNYA, TETAPI HARUS DIISI OLEH PETUGAS BPS

BERDASARKAN HASIL WAWANCARA LANGSUNG

1

III. KETERANGAN UMUM DESA/KELURAHAN

NO. RINCIAN KODE

301

Status pemerintahan: Desa - 1 Nagari - 3 Kelurahan - 2 Lainnya: - 4 (Tuliskan)

302

Badan Perwakilan Desa/Dewan Kelurahan: Ada - 1 Tidak - 2

303

a. RT/RW : Ada -1 Tidak - 2 R303c b. Jika R303a = 1, isikan jumlah 1) Rukun Warga : ….. RW

2) Rukun Tetangga : ….. RT c. Nama satuan lingkungan setempat (SLS) selain RT/RW : ………….……………………(Nama SLS)

(…..……………………………)

304

a. Letak geografis desa/kelurahan:

Pesisir/tepi laut - 1 R305 Bukan pesisir - 2 b. Jika R304a = 2, maka:

- Lembah/daerah aliran sungai - 1 - Lereng/punggung bukit - 2 - Dataran - 3

305

Letak desa/kelurahan ini berada :

Di dalam kawasan hutan - 1 Di tepi kawasan hutan - 2 Di luar kawasan hutan - 3

IV. KEPENDUDUKAN DAN KETENAGAKERJAAN

NO. RINCIAN KODE

401

Penduduk dan keluarga a. Jumlah penduduk laki-laki : ………..... orang b. Jumlah penduduk perempuan : ………..... orang c. Jumlah keluarga : ………….. keluarga d. Persentase keluarga pertanian : ………….. persen e. Jumlah Pra KS dan KS I : ………….. keluarga

a. b. c. d. e.

402

Sumber penghasilan utama sebagian besar penduduk:

Pertanian - 1 R403 Pertambangan dan penggalian - 2 Industri Pengolahan - 3 R404 Perdagangan besar/eceran, rumah makan dan akomodasi - 4 Jasa - 5 R405 Lainnya (Angkutan, Komunikasi dan lainnya) - 6

403 a. Jika R402 = 1, sumber penghasilan utama penduduk pada sub sektor:

Tanaman pangan - 1 Perikanan darat - 4 Kehutanan - 6 Perkebunan - 2 Perikanan laut - 5 Lainnya - 7 Peternakan - 3

b. Jika R403a = 1 atau 2, hasil produksi pertanian tanaman pangan/perkebunan dipakai oleh sebagian besar penduduk untuk:

Dikonsumsi sendiri - 1 Dikonsumsi dan dijual - 3 Dijual - 2

404 Jika R402 = 1, 2 atau 3, sebutkan satu komoditi/produk unggulan: ………………….. (…..……………………………)

405 Penduduk yang bekerja sebagai buruh tani: …… orang

2

NO. RINCIAN KODE

406

a. Apakah di desa/kelurahan ini ada penduduk yang bekerja

sebagai TKI (ke luar negeri): Ada - 1 Tidak - 2 Blok Va

b. Jika R406a =1 Jumlah TKI laki-laki : ……………… orang

Jumlah TKI perempuan: ……………… orang

c. Negara tujuan mayoritas TKI dari desa/kelurahan ini: .…………………………….

VA. PERUMAHAN DAN LINGKUNGAN HIDUP

NO. RINCIAN KODE

501

a. Keluarga yang menggunakan listrik: Ada - 1 Tidak - 2 R502

b. Jika R501a = 1, keluarga yang menggunakan listrik: 1. Listrik PLN: ………….. keluarga

2. Listrik Non PLN: ……….…. keluarga

502

a. Penerangan jalan utama desa/kelurahan: Ada - 1 Tidak - 2 R503

b. Jika R502a = 1, jenisnya: Listrik diusahakan oleh Pemerintah - 1 Listrik Non Pemerintah - 2 Non Listrik - 3

503

Bahan bakar yang digunakan oleh sebagian besar keluarga untuk memasak: Gas kota/LPG - 1 Kayu bakar - 3 Minyak tanah - 2 Lainnya (batu bara, arang, dll) - 4

504

Tempat buang sampah sebagian besar keluarga: Tempat sampah, kemudian diangkut - 1 Sungai - 3 Dalam lubang/dibakar - 2 Lainnya: - 4 (Tuliskan)

505

Tempat buang air besar sebagian besar keluarga: Jamban sendiri - 1 Jamban umum - 3 Jamban bersama - 2 Bukan jamban - 4

506 a. Sungai yang melintasi desa/kelurahan ini: Ada - 1 Tidak - 2 R508

b. Jika R506a = 1, air sungai digunakan untuk 1) Mandi/cuci Ya - 1 Tidak - 2

2) Minum Ya - 3 Tidak - 4 3) Bahan baku air minum (dijernihkan) Ya - 5 Tidak - 6 4) Irigasi Ya - 7 Tidak - 8 5) Untuk industri/pabrik Ya - 1 Tidak - 2 6) Transportasi Ya - 3 Tidak - 4 7) Lainnya Ya - 5 Tidak - 6

1)

2) 3) 4) 5) 6) 7)

507

a. Keluarga yang bertempat tinggal di bantaran/tepi sungai: Ada - 1 Tidak - 2 R508

b. Jika R507a = 1, 1) Jumlah keluarga: ……....… keluarga

2) Jumlah bangunan rumah: ……….… unit

3

NO. RINCIAN KODE

508

a. Keluarga yang bertempat tinggal di bawah Jaringan listrik tegangan tinggi (> 500 KV): Ada - 1 Tidak - 2 ke R509

Tidak ada listrik tegangan tinggi - 3 b. Jika R508a = 1, 1) Jumlah keluarga : ………..… keluarga 2) Jumlah bangunan rumah: ……….…. unit

509

a. Permukiman mewah: Ada - 1 Tidak - 2

b. Permukiman kumuh: Ada - 1 Tidak - 2 R510 c. Jika R509b = 1, 1) Jumlah lokasi : .……..…. lokasi

2) Jumlah bangunan rumah : ……….... unit

3) Jumlah keluarga : ……….… keluarga

1)

2)

3)

Pencemaran lingkungan hidup setahun terakhir

Jenis pencemaran Ada - 1 Tidak - 2

(Jika Kol. (2) = 2, Kol. (3) dan Kol. (4) kosong)

Sumber pencemaran: Limbah Keluarga - 1 Pabrik - 2 Lainnya - 3

Pengaduan ke Kades/Lurah

Ada - 1 Tidak - 2

(1) (2) (3) (4)

510

a. Air b. Tanah c. Udara d. Suara/bising

511

Usaha penambangan/penggalian golongan C desa/kelurahan ini (batu kali, pasir, kapur, kaolin, dan lainnya): Ada - 1 Tidak - 2

VB. ANTISIPASI DAN KEJADIAN BENCANA ALAM

NO. RINCIAN KODE

512 Apakah desa/kelurahan ini rawan bencana: Ya - 1 Tidak - 2 R513

Jenis bencana Ada - 1 Tidak - 2

Jika Kolom (2) = 1 Jumlah keluarga yang tinggal

di daerah rawan bencana

(1) (2) (3)

a. Tanah longsor b. Banjir c. Banjir bandang d. Gempa bumi e. Abrasi pantai

a.

b.

c.

d.

e.

a.

b.

c.

d.

e.

513 Bencana alam dalam 3 tahun terakhir yang menyebabkan kerugian/kerusakan a. Tanah longsor Ada - 1 Tidak - 2 b. Banjir Ada - 3 Tidak - 4 c. Banjir bandang Ada - 5 Tidak - 6 d. Gempa bumi Ada - 7 Tidak - 8 e. Gempa bumi disertai tsunami Ada - 1 Tidak - 2 f. Kebakaran Ada - 3 Tidak - 4 g. Pembakaran hutan/ladang/sawah Ada - 5 Tidak - 6 h. Lainnya: Ada - 7 Tidak - 8

(Tuliskan)

a. b. c. d.

e. f. g. h.

4

VI. PENDIDIKAN DAN KESEHATAN NO. RINCIAN KODE

Jumlah sekolah Pendidikan Negeri Swasta

Jika Kol. (2) = 0 dan Kol. (3) = 0 Jarak ke sekolah terdekat (km)

(1) (2) (3) (4) a. , b. , c. , d. , e. ,

a. TK b. SD dan yang sederajat c. SLTP dan yang sederajat d. SMU dan yang sederajat e. SMK f. Akademi/PT dan yang sederajat g. Sekolah Luar Biasa

a. b.

c. d. e. f. g.

a. b.

c. d. e. f. g.

601

h. Pondok pesantren/Madrasah Diniyah i. Seminari atau sejenisnya

h. i.

Lembaga pendidikan keterampilan yang berada di desa/kelurahan Jenis Keterampilan Ada - 1 Tidak - 2 Jika Kolom (2) = 1,

Jumlah (1) (2) (3)

602

a. Bahasa b. Tata buku/akuntansi c. Komputer d. Memasak/tata boga e. Menjahit/tata busana f. Kecantikan g. Montir mobil/motor

h. Elektronik i. Lainnya: (Tuliskan)

a. b. c. d. e f. g. h. i.

a. b. c. d. e f. g. h. i.

Jika Kolom (2) = 0

Sarana Kesehatan Jumlah Sarana

Kesehatan Jarak dari desa/

kelurahan ke sarana kesehatan (km)

Kemudahan untuk Mencapai:

Sangat mudah - 1 Mudah - 2 Sulit - 3 Sangat sulit - 4

(1) (2) (3) (4)

603

a. Rumah Sakit b. Rumah Sakit Bersalin/Rumah Bersalin c. Poliklinik/Balai Pengobatan d. Puskesmas e. Puskesmas Pembantu f. Tempat Praktek Dokter g. Tempat Praktek Bidan h. Posyandu i. Polindes (Pondok Bersalin Desa) j. Apotik k. Toko khusus obat/jamu

a. b. c. d. e. f. g. h. i. j. k.

a. , b. , c. , d. , e. , f. , g. , h. , i. , j. , k. ,

a. b. c. d. e. f. g. h. i. j. k.

604 Tenaga kesehatan yang tinggal di desa/kelurahan ini: a. 1. Dokter pria ………… orang 2. Dokter wanita ………… orang b. Mantri Kesehatan ………… orang c. Bidan ………… orang d. 1. Dukun bayi terlatih ………… orang 2. Dukun bayi belum dilatih ………… orang

a. 1. 2. b. c. d.1. 2.

5

NO. RINCIAN KODE

605

Jumlah keluarga yang menerima "kartu sehat/kartu peserta program jaminan kesehatan masyarakat miskin" dalam setahun terakhir: …..…..… keluarga

606 Jumlah “Surat Miskin” yang dikeluarkan dalam setahun terakhir: ..…….…. Surat

Wabah penyakit selama setahun terakhir Ada - 1 Tidak - 2

Jumlah yang meninggal Jika Kolom (2) = 1

(1) (2) (3)

607

a. Muntaber/diare b. Demam berdarah c. Campak d. Infeksi Saluran Pernapasan Atas (ISPA) e. Malaria f. Lainnya:

(Tuliskan)

a. b. c. d. e. f.

a. b. c. d. e. f.

608 a. Keperluan air untuk minum/memasak pada umumnya bersumber dari: PAM/Air dalam kemasan - 1 Sungai/danau - 5 Pompa listrik/tangan - 2 Air hujan - 6 Sumur - 3 Lainnya: - 7 Mata air - 4 (Tuliskan)

b. Penduduk desa/kelurahan ini yang membeli air untuk minum/memasak (tidak termasuk air dalam kemasan):

Ada - 1 Tidak - 2

VII. SOSIAL BUDAYA

NO. RINCIAN KODE

701 Agama/kepercayaan apa saja yang ada di desa/kelurahan ini: Islam - 1 Katholik - 4 Budha - 16 Kristen - 2 Hindu - 8 Konghucu - 32 Lainnya - 64

[ jika hanya ada satu agama langsung ke R703]

702 Mayoritas pemeluk agama/kepercayaan di desa/kelurahan ini: Islam - 1 Katholik - 3 Budha - 5 Kristen - 2 Hindu - 4 Konghucu - 6 Lainnya - 7

703 Jumlah tempat ibadah a. Masjid …….…. unit b. Surau/Langgar …….…. unit c. Gereja Kristen …….…. unit d. Gereja Katolik …….…. unit e. Pura …….…. unit f. Vihara/Klenteng …….…. unit

a. b. c. d. e. f.

Fasilitas Perlindungan Sosial dan Lembaga/Organisasi Kemasyarakatan

Jenis fasilitas dan lembaga/organisasi kemasyarakatan Keberadaan Ada -1 Tidak -2

Kegiatan Ada -1 Tidak -2

(1) (2) (3)

704

a. Fasilitas Perlindungan Sosial 1) Panti asuhan 2) Panti wreda/jompo 3) Panti cacat/YPAC 4) Panti bina remaja 5) Panti rehabilitasi anak 6) Panti rehabilitasi WTS

b. Lembaga/Organisasi Kemasyarakatan 1) Majelis ta'lim/kelompok pengajian/kelompok kebaktian 2) Yayasan/kelompok/persatuan kematian 3) Lembaga Swadaya Masyarakat (LSM)

a. 1) 2) 3) 4) 5) 6) b. 1) 2) 3)

a. 1) 2) 3) 4) 5) 6) b. 1) 2) 3)

6

NO. RINCIAN KODE

Penyandang Cacat

Jika Kolom (2) = 1

Jenis cacat Keberadaan Ada -1 Tidak -2

Jumlah yang tinggal di Panti

(orang)

Jumlah yang tinggal di keluarga

(orang) (1) (2) (3) (4)

705

a. Tuna Netra (buta) b. Tuna Rungu-Wicara (bisu-tuli) c. Tuna Grahita (cacat mental) d. Tuna Daksa (cacat tubuh) e. Tuna Ganda (cacat tubuh dan buta/bisu-tuli/mental)

a. b. c. d.

e.

a. b. c. d. e.

a. b. c. d. e.

706

Situs/Bangunan bersejarah a. Gedung bersejarah Ada - 1 Tidak - 2 b. Jembatan bersejarah Ada - 3 Tidak - 4 c. Candi Ada - 5 Tidak - 6 d. Pelabuhan bersejarah Ada - 7 Tidak - 8 e. Stasiun kereta api bersejarah Ada - 1 Tidak - 2 f. Tempat spiritual (misal: mesjid kuno, petilasan) Ada - 3 Tidak - 4 g. Lainnya: Ada - 5 Tidak - 6 (Tuliskan)

a. b. c. d. e. f. g.

707

Penduduk desa/kelurahan ini mempunyai tradisi gotong-royong yang kental/kuat (menyumbang tenaga secara langsung) dalam membangun fasilitas umum desa/kelurahan seperti: jalan, jembatan, tempat ibadah, dan fasilitas umum lainnya. Ya - 1 Tidak - 2

708

Penduduk desa/kelurahan ini yang berjudi (sabung ayam, toto gelap/togel, dan sejenisnya):

Ada sebagian besar - 1 Ada sebagian kecil - 2 Tidak ada - 3

709 Tempat transaksi seks komersial di desa/kelurahan ini:

Ada - 1 Tidak - 2

710

Desa/kelurahan ini dihuni oleh lebih dari satu suku/etnis: Ya - 1 Tidak - 2

711

Mayoritas suku/etnis di desa/kelurahan ini: …………………………………………………………

(di isi BPS Kab/Kota)

VIII. REKREASI, HIBURAN, DAN OLAH RAGA

NO. RINCIAN KODE

801

Tempat hiburan/tempat rekreasi (komersial)

a. Alam: 1. Bahari : Ada - 1 Tidak - 2 2. Non Bahari : Ada - 1 Tidak - 2 b. Budaya : Ada - 1 Tidak - 2 c. Lainnya: Ada - 1 Tidak - 2 (Tuliskan)

a. 1 2 b.

c.

802 a. Gedung bioskop: Ada - 1 Tidak - 2 b. Jika R802a = 2, Jarak ke gedung bioskop terdekat: ………... km

,

803 a. Pub/diskotik/tempat karaoke: Ada - 1 Tidak - 2 b. Jika R803a = 2, Jarak ke pub/diskotik/tempat karaoke terdekat: ………... km

,

7

NO. RINCIAN KODE

Olah Raga

Jenis Olah Raga Lapangan Kelompok Kegiatan (1) (2) (3)

a. Sepak Bola b. Bola Voli c. Bulu Tangkis d. Bola Basket e. Tenis Lapangan f. Renang

Ada - 1 Tidak - 2 Ada - 3 Tidak - 4 Ada - 5 Tidak - 6 Ada - 7 Tidak - 8 Ada - 1 Tidak - 2 Ada - 3 Tidak - 4

Ada - 1 Tidak - 2 Ada - 3 Tidak - 4 Ada - 5 Tidak - 6 Ada - 7 Tidak - 8 Ada - 1 Tidak - 2 Ada - 3 Tidak - 4

804

g. Tenis Meja h. Bela diri (pencak silat, karate, dll)

Ada - 5 Tidak - 6 Ada - 7 Tidak - 8

IX. ANGKUTAN, KOMUNIKASI, DAN INFORMASI NO. RINCIAN KODE

901

Sarana dan prasarana transportasi antar desa/kelurahan a. Lalu lintas dari dan ke desa/kelurahan melalui: Darat - 1 Air - 2 R902 Darat dan air - 3 b. Jika R901a = "1" atau “3” 1. Jenis permukaan jalan yang terluas: Aspal/Beton - 1 Tanah - 3 Diperkeras (kerikil, batu, dsb) - 2 Lainnya: - 4 (Tuliskan) 2. Apakah dapat dilalui kendaraan bermotor roda 4 atau lebih sepanjang tahun:

Ya - 1 Tidak - 2

902

Jarak, waktu tempuh, rata-rata ongkos yang dikeluarkan dan jenis angkutan umum yang digunakan penduduk

Angkutan umum yang digunakan

Dari desa ke: Jarak (Km)

Waktu tempuh (Menit)

Rata-rata ongkos yang dikeluarkan

(Rp.000) Apa saja*) ( ≥≥≥≥ 1 jenis)

Yang Utama*)

Reguler -1 Carter/ sewa -2

(1) (2) (3) (4) (5) (6) (7)

Ibukota Kecamatan

Ibukota Kabupaten/Kota

Ibukota Kabupaten/Kota lain terdekat

,

,

,

*) Kode untuk Kolom (5) dan Kolom (6) Ojek sepeda/Becak/Gerobak/pedati/delman/dokar/bendi - 1 Perahu tidak bermotor - 8 Ojek sepeda motor - 2 Perahu motor tempel/Kapal motor - 16 Kendaraan bermotor roda 3 atau lebih - 4 Lainnya - 32

903

Jumlah terminal penumpang kendaraan bermotor roda 4 atau lebih: …..... unit

904

Jumlah keluarga yang berlangganan telepon kabel: ………... keluarga

905

Telepon umum koin/kartu yang masih aktif: Ada - 1 Tidak - 2

906

Wartel/Kiospon/Warpostel/Warparpostel: ..…... unit

907

Warung internet (Warnet): …..….….. unit

8

NO. RINCIAN KODE

908

a. Kantor Pos/Pos Pembantu/Rumah Pos: Ada - 1 Tidak - 2

R909 b. Jika R908a = 2, jarak ke Kantor Pos terdekat: ……….. km

,

909 Pos Keliling: Ada - 1 Tidak - 2

910 Program TV yang dapat diterima di desa/kelurahan ini (tanpa antena parabola/ TV kabel):

a. TVRI Bisa - 1 Tidak - 2 b. TV Swasta Nasional:

1. TRANS Bisa - 1 Tidak - 2 2. TPI Bisa - 3 Tidak - 4 3. RCTI Bisa - 5 Tidak - 6 4. SCTV Bisa - 7 Tidak - 8 5. INDOSIAR Bisa - 1 Tidak - 2 6. TV 7 Bisa - 3 Tidak - 4 7. GLOBAL Bisa - 5 Tidak - 6 8. ANTV Bisa - 7 Tidak - 8 9. LATIVI Bisa - 1 Tidak - 2

10. METRO Bisa - 3 Tidak - 4

c. TV Luar Negeri Bisa - 1 Tidak - 2

d. TV Lokal Bisa - 1 Tidak - 2

a.

b.1.

2. 3. 4. 5. 6. 7. 8. 9. 10.

c.

d.

911 Sinyal telepon genggam/hand phone/mobile phone tanpa satelit di desa/kelurahan ini: Ada kuat -1 Ada lemah -2 Tidak ada -3

X. PENGGUNAAN LAHAN

NO. RINCIAN LUAS (Ha)

1001 Luas desa/kelurahan (R1002 + R1003): ……….. ha ,

1002

Luas lahan sawah (a + b + c): ……….. ha

a. Lahan sawah berpengairan yang diusahakan: ……….. ha

b. Lahan sawah tidak berpengairan yang diusahakan : ……….. ha

c. Lahan sawah sementara tidak diusahakan: ……….. ha

,

, , ,

1003 Luas lahan bukan sawah (a + b + c + d): ……….. ha

a. Lahan pertanian (kolam/tambak/perkebunan/ hutan rakyat/padang rumput): ……….. ha

b. Ladang yang diusahakan: ……….. ha c. Ladang yang tidak diusahakan: ……….. ha d. Lahan untuk non pertanian (permukiman/perumahan/ pertokoan/perkantoran/industri dan lainnya): ……….. ha

, ,

,

,

,

XI. EKONOMI

NO. RINCIAN KODE

1101

Perusahaan Pertanian berbadan hukum a. Perusahaan pertanian tanaman pangan: Ada - 1 Tidak - 2 b. Perusahaan perkebunan: Ada - 3 Tidak - 4 c. Perusahaan peternakan: Ada - 5 Tidak - 6 d. Perusahaan perikanan tangkap/tambak/budidaya laut: Ada - 7 Tidak - 8 e. Perusahaan kehutanan: Ada - 1 Tidak - 2 f. Perusahaan pertanian lainnya: Ada - 3 Tidak - 4

a. b. c. d. e. f.

9

NO. RINCIAN KODE

1102

Kios sarana produksi pertanian: a. Milik KUD: …….…. unit b. Milik Non KUD: …….…. unit

1103

Kawasan industri: Ada -1 Tidak - 2

1104

Sentra industri: Ada -1 Tidak - 2

1105

Lingkungan/Perkampungan industri kecil (LIK/PIK): Ada -1 Tidak - 2

1106

Jumlah industri besar (≥ 100 pekerja): ..…..….. unit

1107

Jumlah industri sedang (20-99 pekerja): …....….. unit

Industri Kecil (5 – 19 pekerja)/Kerajinan Rumah Tangga (1 - 4 pekerja)

Jenis industri kecil/kerajinan rumah tangga Jumlah (unit)

(1) (2)

1108

a. Kerajinan dari kulit: b. Kerajinan dari kayu: c. Kerajinan dari logam/logam mulia: d. Anyaman: e. Gerabah/keramik: f. Kerajinan dari kain/tenun: g. Makanan: h. Lainnya: (Tuliskan)

…..…... unit …..…... unit …..…... unit …..…... unit …..…... unit …..…... unit

…..…... unit …..…... unit

a. b. c. d. e. f. g. h.

1109

Perusahaan listrik Non PLN: …..…... unit

1110

a. Kelompok pertokoan: Ada -1 R1111 Tidak - 2 b. Jika R1110a = 2, Jarak ke kelompok pertokoan terdekat: ………. km

,

1111

a. Bangunan pasar permanen/

semi permanen: Ada -1 R1112 Tidak - 2 b. Jika R1111a = 2, Jarak ke pasar terdekat: ………. km

,

1112

Pasar tanpa bangunan permanen: …….…. unit

1113

Super market/pasar swalayan/toserba/mini market: …….…. unit

1114

Restoran/rumah makan: …….…. unit

1115

Warung/kedai makanan minuman: …….…. unit

1116

Toko/Warung kelontong: …….…. unit

1117

Hotel: …….…. unit

1118 Penginapan(hostel/motel/losmen/wisma): …….…. unit

1119

Bank Umum (Kantor Pusat/Cabang/Capem): ……….. unit

1120

a. Bank Perkreditan Rakyat (BPR Baru/PT. Bank Pasar/

PT. Bank Desa/dsj): ……….. unit b. ATM (Automatic Teller Machine/Anjungan Tunai Mandiri): Ada - 1 Tidak - 2

10

NO. RINCIAN KODE

1121 Jumlah Koperasi: …..….... unit a. Koperasi Unit Desa: …...…... unit b. Koperasi Industri Kecil dan Kerajinan Rakyat (Kopinkra): ……….. unit c. Koperasi Simpan Pinjam: ……….. unit d. Koperasi Non KUD lainnya: ……….. unit

a. b. c. d.

1122

Kantor Pegadaian: Ada -1 Tidak - 2

1123

Lembaga keuangan mikro informal (LDKP/BKD/ LEPMM/BMT/kelompok

simpan pinjam): Ada -1 Tidak - 2

1124 Fasilitas perkreditan yang diterima penduduk/warga selama setahun terakhir: a. Kredit Ketahanan Pangan (KKP) Ada -1 Tidak - 2 b. Kredit Usaha Kecil (KUK) Ada -3 Tidak - 4 c. Kredit Pemilikan Rumah (KPR) Ada -5 Tidak - 6 d. Kredit lainnya: Ada -7 Tidak - 8 (Tuliskan)

a. b. c. d.

1125

Bengkel/reparasi kendaraan bermotor (mobil/motor): …….…. unit

1126

Bengkel/reparasi alat-alat elektronik (Radio/Tape/TV/Kulkas/AC dll): …….…. unit

1127

Usaha foto kopi(photo copy): …….…. unit

1128

Biro/Agen perjalanan wisata (Tour and Travel): …….…. unit

1129

Tempat pangkas rambut (barber shop): …..…... unit

1130

Salon kecantikan/tata rias wajah/pengantin: ..…..…. unit

1131

Bengkel las (membuat pagar besi, tralis dll): …..…... unit

1132

Persewaan alat-alat pesta: …..…... unit

XII. POLITIK DAN KEAMANAN

NO. RINCIAN KODE

Tuliskan urutan 5 Partai yang memperoleh suara terbanyak untuk DPRD Kabupaten/Kota (khusus DKI Jakarta DPRD Provinsi) pada Pemilu 2004

Nama Partai

Nomor Partai Kepengurusan partai di

tingkat desa/kelurahan Ada - 1 Tidak - 2

(1) (2) (3)

1201

1. ………………………………………………………… 2. ………………………………………………………… 3. …………………………………………………………

4. …………………………………………………… 5. ..………………………………………………………..

1. 2. 3. 4. 5.

1. 2. 3. 4. 5.

11

NO. RINCIAN KODE

1202

a. Apakah pernah terjadi perkelahian massal selama setahun terakhir Ya - 1 Tidak - 2 R1204 b. Jika R1202a = 1, jumlah warga yang menjadi korban/kerugian materi akibat

perkelahian massal: 1) Meninggal : …………..… orang

2) Luka-luka : …………..… orang

3) Material (000 Rp.) : Rp.…………………

1203

a. Jenis perkelahian massal yang paling sering terjadi selama setahun terakhir: Perkelahian antar kelompok warga - 1 Perkelahian antar suku - 4 Perkelahian warga dengan aparat - 2 Lainnya: - 5 keamanan (Tuliskan) Perkelahian pelajar/mahasiswa - 3 b. Perkelahian massal yang terjadi selama setahun terakhir: Masalah baru - 1 Masalah lama - 2 c. Perkelahian massal tersebut dapat diselesaikan secara damai: Ya - 1 Tidak - 2 R1204 d. Jika R1203c = 1, diselesaikan oleh: Masyarakat -1 Aparat desa - 2 Aparat keamanan - 3

a. Jenis kejahatan yang terjadi setahun terakhir

Jenis kejahatan

Apakah ada kasus kejahatan:

Ya - 1 Tidak - 2

Kecenderungan kejahatan dibanding satu tahun yang lalu

Jika Kolom (2) =1 Menurun - 1 Sama saja - 2 Meningkat - 3

(1) (2) (3)

1204

1. Pencurian 2. Perampokan 3. Penjarahan 4. Penganiayaan/kekerasan 5. Pembakaran 6. Perkosaan 7. Penyalahgunaan narkoba 8. Peredaran gelap narkoba 9. Pembunuhan 10. Penjualan anak 11. Lainnya: (Tuliskan)

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

b. Jika R1204a Kolom (2) ada Kode 1, jenis kejahatan yang paling banyak kasusnya: ………………………………………………….…

1205 Kasus bunuh diri yang terjadi setahun terakhir: Ya - 1 Tidak - 2

1206

Upaya warga menjaga keamanan selama setahun terakhir a. Membangun pos keamanan lingkungan: Ya - 1 Tidak - 2 b. Membentuk regu penjaga keamanan lingkungan: Ya - 3 Tidak - 4 c. Menambah jumlah anggota hansip/linmas: Ya - 5 Tidak - 6 d. Memeriksa setiap warga dari luar desa

yang masuk: Ya - 7 Tidak - 8 e. Lainnya: Ya - 1 Tidak - 2 (Tuliskan)

a. b. c. d. e.

12

NO. RINCIAN KODE

Jika Kolom (2) = 2

Sarana keamanan lingkungan (kamling)

Ada - 1 Tidak ada - 2

Jarak terdekat (km)

Kemudahan untuk mencapai Sangat mudah - 1 Mudah - 2 Sulit - 3 Sangat sulit - 4

(1) (2) (3) (4)

1207

a. Pos hansip/kamling

b. Pos polisi

,

1208 Jumlah anggota hansip/linmas di desa/kelurahan ini: …………..… orang

XIII. KETERANGAN APARAT DESA/KELURAHAN

Jika Kolom (2) = 1 Aparat Pemerintahan

Desa/Kelurahan

Ada - 1 Tidak - 2

Umur

Jenis Kelamin Laki-laki - 1 Perempuan - 2

Pendidikan *) tertinggi yang ditamatkan

(1) (2) (3) (4) (5) a. Kepala Desa/Lurah b. Sekretaris Desa/Sekretaris Kelurahan c. Ketua BPD/Dewan Kelurahan d. Ketua LPMD/K

1301

*) Kode Pendidikan

Belum/Tidak Tamat SD - 1 SM dan Sederajat - 4 Tamat SD dan Sederajat - 2 Akademi/DIII - 5 SLTP dan Sederajat - 3 Perguruan Tinggi - 6

1302

Sebutkan sumber data/nara sumber pada saat pencacahan: Kades/pamong desa - 1 Pemuka Agama - 8 Kepala Sekolah/Guru - 2 Dokter/Puskesmas - 16 Ketua BPD/Dekel - 4 Lainnya: - 32 (Tuliskan)

XIV. CATATAN

Semua pertanyaan/rincian mengacu pada situasi saat pencacahan, kecuali pada beberapa pertanyaan/rincian yang telah ditetapkan referensi waktunya

sni peta

Documents