sop-netbackup sh r7
TRANSCRIPT
Release 7.0.
Submitted to
14 May 2007Release 7.0.
Submitted by
Distribution Control No: Document Release No: Release 7.0.
Confidential © [email protected]
This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or part), reformatted or altered in any way for either internal or external purposes.
Veritas Netbackup SOP
Release 7.0.
Table of Contents
CHAPTER 1 STANDARD OPERATING PROCEDURE FOR VERITAS NETBACKUP 6.0 MASTER SERVER.......................................1
1.1 INTRODUCTION.........................................................................................11.2 VERITAS NETBACKUP MASTER SERVER INSTALLATION.............................11.3 AIX CLIENTS INSTALLATION (<CLIENT>).................................................121.4 SPECIFYING THE NETBACKUP MASTER SERVER FROM THE CLIENT.........141.5 NETBACKUP MASTER SERVER INITIAL CONFIGURATION..........................161.6 CREATING BACKUP POLICIES FOR AIX CLIENTS.......................................321.7 UNINSTALLING NETBACKUP SERVER.......................................................64
Confidential © [email protected]
This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
DOCUMENT CONTROLAuthor Suraya Hani
File Name
Created 11 December 2006
Last Edited 18 May 2007
Number of Pages 71 (including cover)
RELEASE AND REVISION RECORD
The following information is being used to control and track modifications made to
this document.
Revision
DateSection(s) Release No. Page No. Summary Of Change(s)
14/05/200
7
No. 27 R4 26 Changed retention period
for CatalogBackup to 2
months
(Item 5) R4 34 Retention period for Initial-
Backup changed to 2
months
(Item 8) R4 36 Changes in the Initial-
Backup Selection List.
(Item 5) R4 40 Changes to the Weekly-
Backup schedule
(Item 6) R4 41 Changes to the Start
Window of Weekly-Backup
schedule
(Item 11
and 12)
R4 44 Retention period for User-
archive changed to 2
months
(Item 5) R4 50 Changes to the Daily-
Backup schedule
(Item 6) R4 51 Changes to the Start
Window of Daily-Backup
schedule
Confidential © [email protected]
This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
(Item 5) R4 59 MQ-DailyBackup retention
period changed to 2 months
(Item 10) R4 62 Another file added for
MQLog policy’s Selection
List.
Also, another policy created,
MQLog-Monthly-Backup.
18 May
2007
(Item 10) R5 62 Added Note 3 regarding
Binaries-Backup Policy.
31 May
2007
Item 1.8 R6 67 Added section on
uninstalling the tape library.
27 August
2007
Item 1.7 R7 64 Added policy to back up all
data files
Confidential © [email protected]
This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
Chapter 1Chapter 1 Standard Operating Procedure for Standard Operating Procedure for Veritas Netbackup 6.0 Master ServerVeritas Netbackup 6.0 Master Server
1.1INTRODUCTION
This document contains the standard operating procedure for installing Veritas
Netbackup 6.0 for Windows Server. The procedure would be performed on a
Windows 2003 Server that would assume the role of Master Backup Server.
1.2VERITAS NETBACKUP MASTER SERVER INSTALLATION
1. Log on as veritas and password is xxxxxxx
Note: User account veritas has been created with the Local Admin rights.
2. Insert the VERITAS NetBackup Enterprise Server 6.0 (Windows 32-bit
Server and Client) installation CD in the drive and the VERITAS NetBackup
installation browser will start automatically.
3. Click NetBackup Installation.
4. On the following screen, select Install Server Software.
Confidential ©[email protected] Page 1This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
5. The Welcome to the NetBackup Setup Wizard screen appears. Click Next.
Confidential ©[email protected] Page 2This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
6. On the License Agreement screen, accept the license agreement and click
Next.
7. On the NetBackup Installation Type screen, choose Install to this
computer only and Custom. Click Next.
Confidential ©[email protected] Page 3This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
8. On the NetBackup License Key and Server Type screen, perform the
following:
a. Enter the license keys for these options (can be found on the Software
License Certificate).
NetBackup Server, Windows, Enterprise Server,v6.0,License;
Confidential ©[email protected] Page 4This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
b. Select the icon next to NetBackup Master Server.
Confidential ©[email protected] Page 5This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
9. On the Netbackup Features screen, click Change.
10.Type the new installation path as D:\Program Files\Veritas. Click Next.
Confidential ©[email protected] Page 6This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
11.On the NetBackup Port Numbers screen, click Next.
12.On the NetBackup Services screen, check these boxes:
a. ‘Use the built-in system account’ check box;
b. ‘Automatic’ startup type;
c. ‘Start NetBackup Server Services After Install’ check box.
Click Next.
Confidential ©[email protected] Page 7This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
13. On the NetBackup System Names screen, click Next.
14. On the NetBackup Enterprise Media Manager screen, verify Netbackup
Master Server’s name as VERITAS01. Click Next.
Confidential ©[email protected] Page 8This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
15. Click Install on the Ready to Install the Program screen.
16. On the System Validation Complete screen, click Add Keys.
Confidential ©[email protected] Page 9This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
17. (Optional) Uncheck ‘Launch Netbackup Administration Console now’ to
start the console later.
Add these keys by clicking the button for each key:
NetBackup Option,Cross Platform,Library Based Tape Drive
Support,v6.0,License;
Click Add.
Click OK.
NetBackup Client, Unix, Protect Server,v6.0,License;
Confidential ©[email protected] Page 10This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
Click Add.
Click OK.
Netbackup Database Agent, Unix, DB2 Agent,v6.0,License
Click Add.
Click OK.
NetBackup Option,Shared Storage Option,,v6.0,License;
Click Add.
Click OK.
Confidential ©[email protected] Page 11This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
Click Close.
18. Click Finish.
Confidential ©[email protected] Page 12This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
1.3AIX CLIENTS INSTALLATION (<CLIENT>)
This portion contains the standard operating procedure for installing Veritas
Netbackup 6.0 AIX Client. The procedure would be performed on AIX servers which
will be the Netbackup clients.
1. Log in as the root user on the Production Server (<CLIENT>). Type
Username: root and password: xxxxxx. If you are already logged in, but are
not the root user, run the following command: su - root
2. Mount the Netbackup Client CD-ROM (All Unix Clients).
Note: To go to terminal, click Personal Application – Terminal. Type
mount /cdrom.
3. Change the working directory to the CD-ROM directory.
For example: cd /cdrom
Type ls –l to verify CDROM is mounted.
4. Load and install the software by running the install script. Type the following
command:
./install
5. Provide these answers to prompts below:
o Do you wish to continue?
Answer y.
o Do you wish to install the Netbackup Client Software for this client?
Answer y.
6. Specify Client Name as <client> and Veritas Server Name as VERITAS01
when asked.
7. Close the terminal and open a new one. Type umount /cdrom to unmount
the CDROM.
8. Take out the Client CD and insert the UNIX and Linux Options CD to install
the DB2 agents.
Confidential ©[email protected] Page 13This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
9. Open a terminal and type mount /cdrom.
10. Go to cd /cdrom and type ./install
11. Choose option 2 to install the Netbackup Database Agent Software. Type
2. Press Enter.
12. The following prompt appears:
a. Do you want to do a local installation? (y/n) [n]
Type y. Press Enter.
b. A menu of all database agents available on the CD-ROM are displayed.
c. Select the NetBackup for DB2 option. Type 1 and press Enter.
d. Type q to quit selecting options.
e. A prompt appears asking if the list is correct.
Type y. Type Enter.
f. Type q to quit from the script. Press Enter.
13. Close the terminal.
14. Type umount /cdrom to unmount the CD. Eject the CD.
15. Change to the NetBackup /bin directory. Type: cd
usr/openv/netbackup/bin
16. Enter the following: ./db2_config
17. The following appears:
a. Please specify the DB2 instance home path name:
Type /home/<client>32 and press Enter.
b. Do you have other DB2 instances? (y/n) [n]
Type y. Press Enter.
c. Please specify the DB2 instance home path name:
Type /home/db2db and press Enter.
d. Do you have other DB2 instances? (y/n) [n]
Type n. Press Enter.
18. Close the terminal.
Confidential ©[email protected] Page 14This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
19. Repeat steps 1 until 13 on the Development server.
1.4SPECIFYING THE NETBACKUP MASTER SERVER FROM THE CLIENT
1. Issue the following command to start the NetBackup Backup, Archive, and
Restore interface:
/usr/openv/netbackup/bin/jbpSA &
Host name: <CLIENT>
User name: root
Password: xxxxxx
2. Go to Action – Specify Netbackup Machines and Policy Type.
3. Click to change and verify below details.
a. Server to use for backups and restore: VERITAS01
b. Source clients for restore: <CLIENT>
Confidential ©[email protected] Page 15This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
c. Destination client for restores: <client>
d. Policy type for restores: Standard
4. Click OK.
Confidential ©[email protected] Page 16This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
1.5NETBACKUP MASTER SERVER INITIAL CONFIGURATION
Note: Ensure that the tape library has been correctly configured for Windows.
NetBackup cannot function reliably unless devices are correctly installed and
configured.
1. If you have logged of from the server, log in back as veritas and password
is xxxxxx
2. Insert the NetBackup installation CD in the drive.
3. Go to Additional Products .
Confidential ©[email protected] Page 17This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
4. Click Additional Products Installation.
5. Click on Netbackup Tape Device Drivers (32-bit).
Recommended:
Download latest Veritas Tape Device Driver from
www.support.veritas.com.
Save the package in D:/Program Files/Veritas/Tape Device
Drivers
Run the installation package after successful save file operation.
Confidential ©[email protected] Page 18This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
6. Open the Administration Console on the desktop and click on the
Getting Started icon. Else it will pop up automatically after first time
installation.
7. The Getting Started - Welcome to NetBackup window will appear.
8. Click Next at the Getting Started window.
Confidential ©[email protected] Page 19This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
9. Click Next at Step 1. Device Configuration below.
10. At the Device Configuration Wizard, click Next.
Confidential ©[email protected] Page 20This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
11. Click Next at the Device Host.
12. At the Scanning Hosts, click Next.
Confidential ©[email protected] Page 21This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
13. You should be able to see below devices. Click Next at the Backup
Devices window.
14. Ensure below devices are selected (ticked). Click Next at the Drag and
Drop Configuration window.
Confidential ©[email protected] Page 22This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
15. Click Yes to continue.
16. The Updating Device will appear. Click Next to continue.
17. At the Configure Storage Units window, verify veritas01-hcart3-robot-
tld-0 is checked. Click Next.
18.Click Finish.
Confidential ©[email protected] Page 23This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
19. At Step 2. Volume Configuration, click Next.
20. This window will appear. Click OK.
21. At Step 3. Catalog Backup Configuration, click Next.
Confidential ©[email protected] Page 24This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
22. At the Netbackup Catalog Wizard, click Next.
23. Choose Online, hot catalog backup. Click Next.
24. Click Next.
Confidential ©[email protected] Page 25This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
25. Type Policy name as CatalogBackup. Click Next.
26. Specify backup type as Full Backup and Incremental Backup –
Differential. Click Next.
Confidential ©[email protected] Page 26This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
27. At theRotation window, click Next.
*Note: These changes have been implemented:
Retain full backups for 2 months
Retain incremental backups for 2 months
28. At the Start Window, just click Next.
Confidential ©[email protected] Page 27This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
29. At Catalog Disaster Recovery File, type Path: C:\Program Files\
Veritas\CatalogRecovery. Leave Logon and Password blank. Click Next.
30. Select No at E-mail Disaster Recovery Information. Click Next.
Confidential ©[email protected] Page 28This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
31. Click Finish.
32. Click Next.
Confidential ©[email protected] Page 29This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
33. Click Finish.
34. At Step 4. Policy Configuration, click Next.
Confidential ©[email protected] Page 30This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
35. Click Cancel to configure at later time.
36. At the Netbackup Installation Test, click Next.
Confidential ©[email protected] Page 31This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
37. Click Finish.
Confidential ©[email protected] Page 32This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
1.6CREATING BACKUP POLICIES FOR AIX CLIENTS
Note: Perform this step only after Netbackup AIX Client has been installed. For
detailed steps on creating backup policies, please refer to Netbackup System
Administrator’s Guide for Windows, Vol 1 and Vol 2.
1. Log on to Master Backup Server. (Username: veritas, password: zaq1XSW@)
2. Start the Netbackup Administration Console.
3. To create a Standard policy type for initial back up of the system files(exclude DB2
databases and MQ Log):
Item Details
1. Right-click Policies and select New Policy.
Confidential ©[email protected] Page 33This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
2.
Type Policy name: Initial-Backup. Click OK.
3.
Change Policy type: Standard and Destination – Policy storage unit:
veritas01-hcart3-robot-tld-0. Uncheck ‘Active. Go into effect
at:’.
Then click Schedules tab.
Confidential ©[email protected] Page 34This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
4.
Click New.
5. Type Name: Initial-Backup. Click OK.
*Note: Retention period has been changed to 2 Infinity(Level 9).
Confidential ©[email protected] Page 35This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
6.
Click Clients tab.
Click New and type in Client name: <CLIENT>. Press Enter.
7.
Select RS6000, AIX5. Click OK.
Confidential ©[email protected] Page 36This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
8.
Click Backup Selections tab. Click New.
Type /usr and press Enter. Click New.
Type /var and press Enter. Click New.
Type /etc and press Enter. Click New.
Type /opt and press Enter. Click New.
Type /home and press Enter.
Click OK.
*Note: Selection lists have been changed to: /home/<client>/.envparm
/home/user<client>/.profile
/home/<client>32/.profile
/home/<client>/comapi
/home/<client>/common
/home/<client>/dbmaint
/home/<client>/fms
/home/<client>/reporting
/home/<client>/util
/var/mqm
Confidential ©[email protected] Page 37This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
/mqlog/<CLIENT>QM
/home/<client>/fmsdb/bkup
Confidential ©[email protected] Page 38This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
4. Create a Standard policy type for backing up the DB2 database zipped
file.
Item Details
1.
Right-click Policies and select New Policy.
2. Type Policy name: DB2-Backup. Click OK.
Confidential ©[email protected] Page 39This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
3.
Change Policy type: Standard and Destination – Policy storage
unit: veritas01-hcart3-robot-tld-0. Then click Schedules tab.
Confidential ©[email protected] Page 40This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
4.
Click New.
5. *Note: This Weekly-Backup schedule is no longer used for back-up.
Current schedule used is the ‘User-archive’ schedule (refer to item 11).
Type Name: Weekly-Backup. Then click Start Window.
6. *Note: The Start Window has been changed to ‘blank’ because the schedule
Confidential ©[email protected] Page 41This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
will not be used for backups.
Change these details:- Modify Day: Sun , Start Time: 6 am End day: Sun , End time: 12 pm
Click OK.
Note: The time specified in the Start Window is the time range where a
backup may start or be initiated. It is not the duration of how long a backup
will take.
7.
Confidential ©[email protected] Page 42This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
Click New.
8.
Type Name: User-backup and Type of backup: User Backup. Click Start Window.Note: ‘User Backup’ type of backup is not an automatic schedule. It is created to allow user perform backup manually from client side.
9.
Change these details:- Modify Day: Mon , Start Time: 12 am End day: Sun , End time: 12 am
Click OK.
Confidential ©[email protected] Page 43This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
10.
Click New.
11. *Note: Retention period has been changed to 2 months.
Type Name: User-archive and Type of backup: User Archive. Click Start Window.Note: ‘User Archive’ type of backup is not an automatic schedule. This is created to allow manual backup by user from client side with the option to delete the files after successful backup.
Confidential ©[email protected] Page 44This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
12. *Note: The Start Window has been changed to:
Modify Day: Sun, Start time: 12:00 AM
End day: Sat, End time: 12:00 AM
Change these details:- Modify Day: Sun , Start Time: 6 am End day: Sun , End time: 12 pm
Click OK.
Confidential ©[email protected] Page 45This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
13.
Click Clients.
Confidential ©[email protected] Page 46This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
14.
Click New and type in Client name: <CLIENT>. Press Enter.
15.
Select RS6000, AIX5. Click OK.
Confidential ©[email protected] Page 47This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
16.
Click Backup Selections tab. Click New. Type /home/<client>/fmsdb/bkup. Press Enter. Click OK.
Confidential ©[email protected] Page 48This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
To browse files
To use directives
Release 7.0.
5. Create another Standard policy type to backup the archive logs.
Item Details
1.
Right-click Policies and select New Policy.
2. Type Policy name: DB2-Backup-Log. Click OK.
Confidential ©[email protected] Page 49This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
3.
Change Policy type: Standard and Destination – Policy storage unit:
veritas01-hcart3-robot-tld-0. Then click Schedules tab.
Confidential ©[email protected] Page 50This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
4.
Click New.
5. *Note: This Daily-Backup schedule is no longer used for back-up. Current
schedule used is the ‘User-archive-log’ schedule (refer to item 8).
Type Name: Daily-Backup. Change Type of backup: Differential Incremental Backup.
Confidential ©[email protected] Page 51This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
Change Schedule type: Frequency – 1 Hours.
Then click Start Window.
6. *Note: The Start Window has been changed to ‘blank’. We will not be
using this policy for backup.
Change these details:- Modify Day: Sun , Start Time: 12 am End day: Sat , End time: 12 am
Click OK.Note: Backup will start hourly in regards to last backup time. Example: If backup starts at 12.05pm, the consequent schedule will also start 5 minutes later, i.e 1.05pm, 2.05pm and so on.
Confidential ©[email protected] Page 52This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
7.
Click New.
8.
Type Name: User-Backup-log and Type of backup: User Backup. Click Start Window.
Confidential ©[email protected] Page 53This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
9.
Change these details:- Modify Day: Sun , Start Time: 12 am End day: Sat , End time: 12 am
Click OK.
10.
Click New.
Confidential ©[email protected] Page 54This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
11.
Type Name: User-archive-log and Type of backup: User Archive. Click Start Window.
12.
Change these settings: Modify Day: Sun , Start Time: 12 am End day: Sat , End time: 12 am
Click OK.
Confidential ©[email protected] Page 55This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
13.
Click Clients tab.
14.
Click New and type in Client name: <CLIENT>. Press Enter.
Confidential ©[email protected] Page 56This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
15.
Select RS6000, AIX5. Click OK.
16.
Click Backup Selections tab. Click New. Type /db2log/archivelog. Press Enter. Click OK.
Confidential ©[email protected] Page 57This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
6. Finally, create a Standard policy to backup the MQ log files.
Item Details
1. Right-click Policies and select New Policy.
2. Type Policy name: MQLog. Click OK.
Confidential ©[email protected] Page 58This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
3.
Change Policy type: Standard and Destination – Policy storage
unit: veritas01-hcart3-robot-tld-0. Then click Schedules tab.
Confidential ©[email protected] Page 59This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
4.
Click New.
5. Type Name: MQ-DailyBackup. Change Type of backup: Full
Backup.
Change Schedule type: Frequency – 1 days.
Then click Start Window.
Confidential ©[email protected] Page 60This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
*Note: Retention period has been changed to 2 months.
6.
Change these details:- Modify Day: Sun , Start Time: 12 am End day: Sun , End time: 4 am Click the time bar and click Duplicate.
Click OK.
7.
Confidential ©[email protected] Page 61This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
Click Clients tab.
8.
Click New and type in Client name: <CLIENT>. Press Enter.
9.
Select RS6000, AIX5. Click OK.
Confidential ©[email protected] Page 62This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
10.
Click Backup Selections tab. Click New. Type /mqlog. Press Enter.
*Note 1: One more file has been added for this backup selection.
/var/mqm/qmgrs/<CLIENT>QM/amqalchk.fil
Click OK.
*Note 2: One more policy has been created, namely the ‘MQLog-Monthly-Backup’. The file being backed-up by this policy is ‘/var/mqm’. Retention period is also set to 2 months. This policy will run at every last day of the month, at 12AM. (Refer to file <CLIENT>.FMS.SysDoc-Netbackup for Server.SH.R1.<CLIENT>.doc, item 2.3.6 page 46).
*Note 3: Another policy called ‘Binaries-Backup’ has been added.The files being backed-up by this policy are as:
/home/<client>/comapi/lib
Confidential ©[email protected] Page 63This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
/home/<client>/comapi/lib_dbg
/home/<client>/common/lib
/home/<client>/common/lib_dbg
/home/<client>/dbmaint/bin
/home/<client>/dbmaint/cmd
/home/<client>/dbmaint/bin_dbg
/home/<client>/dbmaint/bnd
/home/<client>/fms/dwld/bin
/home/<client>/fms/dwld/cmd
/home/<client>/fms/dwld/bin_dbg
/home/<client>/fms/upld/bin
/home/<client>/fms/upld/cmd
/home/<client>/fms/upld/bin_dbg
/home/<client>/fms/fmstx/bin
/home/<client>/fms/fmstx/cmd
/home/<client>/fms/fmstx/bin_dbg
/home/<client>/fms/lmstx/bin
/home/<client>/fms/lmstx/cmd
/home/<client>/fms/lmstx/bin_dbg
/home/<client>/fms/lmstx/bnd
/home/<client>/fms/host/bin
/home/<client>/fms/host/cmd
/home/<client>/fms/host/bin_dbg
/home/<client>/fms/post/bin
/home/<client>/fms/post/cmd
/home/<client>/fms/post/bin_dbg
/home/<client>/fms/postlog/bin
/home/<client>/fms/postlog/cmd
/home/<client>/fms/postlog/bin_dbg
/home/<client>/reporting/bin
/home/<client>/reporting/cmd
/home/<client>/reporting/bin_dbg
/home/<client>/util/bin
/home/<client>/util/cmd
/home/<client>/util/bin_dbg Retention period is also set to 2 months. This policy will be run manually, as per needed..
Confidential ©[email protected] Page 64This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
(Refer to file <CLIENT>.FMS.SysDoc-Netbackup for Server.SH.R2.<CLIENT>.doc, item 2.3.7 page 49).
1.7Steps for Creating A Policy To Backup All Data Files on <CLIENT>
Follow the steps below to create a policy that backs up all the files as per listed in
the rest of the backup policies.
Step 1: Creating New Volume Pool
a. At the Master server, open the Administration Console.
b. Go to Media and Device Management – Media – Volume Pool and press
right-click. Select New. Give a Pool Name and Description, click OK.
Step 2: Creating New Backup Policy
a. Go to Netbackup Management – Policies, press right-click. Select New
Policy.
b. Type a Policy Name, click OK.
c. At Attributes tab, select these details:
o Policy type: Standard
o Policy volume pool: the name of the volume pool created in
Step 1.
d. At Schedules tab, create a new schedule. Name the new schedule.
o If the policy is to run on scheduled basis, fill-in the Start Window.
o Else, leave the Start Window blank.
e. At Clients tab, type in client name as <CLIENT>.
f. At Backup Selections tab, fill in the files and folders to be backed-up, one at
a time.
Step 3: Performing Manual Backup
a. Go to Netbackup Management – Policies. Right-click the policy name
created in Step 2.
b. Select Manual Backup. Click OK twice.
Confidential ©[email protected] Page 65This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
c. View progress at Activity Monitor.
Step 4: Identifying the media used for backup
d. Go to Media and Device Management – Media – Volume Pool.
e. Select the Volume Pool created in Step 1 and expand it.
Take note of the media name and slot number in that volume pool.
1.8UNINSTALLING NETBACKUP SERVER
1. Insert the VERITAS NetBackup Enterprise Server 6.0 (Windows 32-bit Server
and Client) installation CD in the drive and the VERITAS NetBackup
installation browser will start automatically.
2. Click NetBackup Installation.
3. On the following screen, select Install Server Software.
Confidential ©[email protected] Page 66This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
Confidential ©[email protected] Page 67This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
4. The Welcome to the NetBackup Setup Wizard screen appears. Click
Next.
5. At the Program Maintenance, select Remove and check Remove all Netbackup configuration, catalogs and log files. Click Next.
Confidential ©[email protected] Page 68This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.
Release 7.0.
6. At the Ready to Uninstall the Program, click Remove.
7. Click Finish.
1.9Uninstalling the Tape Library
Netbackup will detect any backup devices installed in you Windows environment,
provided the devices are with appropriate Netbackup backup devices license and
supported by Netbackup. Therefore, to uninstall it from the Netbackup
environment, refer to the Microsoft Windows Server 2003 documentation
provided by Microsoft.
Confidential ©[email protected] Page 69This document is prepared by Mesiniaga Berhad. All rights reserved. Under no circumstances can this document be reproduced (in whole or
part), reformatted or altered in any way for either internal or external purposes.