spellman

MEDICAL INDUSTRIAL & COMMERCIAL X-RAY ANALYSIS SCIENTIFIC/ANALYTICAL

e-mail:[email protected]

Spellman USA and Corporate HQ475 Wireless Blvd.

Hauppauge, NY 11788United States

tel: +1-631-630-3000

fax: +1-631-435-1620

Spellman Valhalla NY USAOne Commerce ParkValhalla, NY 10595United States

tel: +1-914-686-3600

fax: +1-914-686-5424

Spellman Bohemia NY USA30 Crossways EastBohemia, NY 11716

United States

Spellman UKBroomers Hill Park #14, Broomers Hill

Pulborough, West Sussex,

United Kingdom RH20 2RY

tel: +44 (0) 1798 877000

fax: +44 (0) 1798 872479

Spellman Japan4-3-1 Kamitoda,

Toda-shi, Saitama-ken,

Japan 335-0022

tel: +81(0) 48-447-6500

fax: +81(0) 48-447-6501

Spellman ChinaSpellman High Voltage Electronics (SIP) Co Ltd.

Block D, No.16 SuTong Road,

Suzhou Industrial Park 215021 China

tel: +(86)-512-69006010

fax: +(86)-512-67630030

Spellman High Voltage Korea Co.,Ltd.#B-720, BRC Smart Valley,Song Do Mirae-ro 30,

Yeonsu-Gu, Incheon, Korea 406-081

tel: +82-32-719-2300

fax: +82-32-720-4300

Spellman de MexicoDiagonal Lorenzo de la Garza # 65

Cd. Industrial

H. Matamoros, Tamps CP 87494

Mexico

tel: +52 868 150-1200

fax: +52 868 150-1218

Spellman de Mexico-Plant 3Avenida Chapultepec, #101

Parque Industrial Finsa Oriente

H. Matamoros, Tamaulipas CP 87340

Mexico

tel: +52 868 150-1200

Spellman High Voltage GmbHJosef-Baumann-Strae 23

44805 Bochum

Germany

tel: +49 (0) 234 87906-0

fax: +49 (0) 234 87906-11

Bohemia, NY USA

30,000-square-foot facility,

dedicated to metal fabrication

and electronic assembly.

Valhalla, NY USA

20,000-square-foot facility

dedicated to design, manufacturing,

sales and service.

Global Headquarters,

Hauppauge, NY USA100,000-square-foot facility, including

design, manufacturing and corporate

management.

Matamoros, Mexico Plant 3

165,000-square-foot manufacturing

center, mirroring our New York

headquarters in capital equipment

and production process

technologies.

Matamoros, Mexico Plant 2


supporting Plant 3 including sheet

metal fabrication capabilities

Spellman... Your Global Resource

MEETING CUSTOMER NEEDSFor over 65 years, Spellman has beenhelping technology companies grow byproviding standard and custom high voltagepower converters of exceptional value andperformance and by aligning our proce-dures, processes and infrastructure tosupport our customers goals a processwe call homologation. At Spellman, homolo-gation is in everything we do. From initialproduct concept through final delivery, wededicate a team of experts to work witheach customer.

YOUR VISION IS OUR MISSIONSpellman advances medical care, industrialprocesses, quality control, scientificresearch, security and telecommunicationsby providing innovative high voltage powerconversion solutions that enable equipmentmanufacturers to improve their systemsperformance, reliability, cost and bottom line.

Mid West, USA

Valhalla, USA

Bohemia, USA

Germany

West Coast, USA

Mexico

China

Russia

Hauppauge, USACorporate

Headquarters

Italy

United Kingdom

Design, Sales & Service & Production

Sales Office

Production Facility

Sales & Service

Sales, Service & Production

spellmanhv.com

Pullborough, UK

27,500-square-foot

facility dedicated to

design, manufacturing,

sales and service.

Tokyo, Japan

7,000-square-foot

facility dedicated to

sales and service.

Suzhou, China


dedicated to engineering,

manufacturing, sales

and service.

for High Voltage Power Conversions

Tokyo

Osaka

India

KoreaEast Coast, USA

Incheon, Korea


dedicated to sales and

service.

Bochum, Germany


dedicated to manufacturing,

sales and service.

All of our product families haveconfigurable options and can becustomized for specific requirements

Modular Suppliesoffer a single output up to 1200W indiverse form factors, and are designedto be integrated into systems, witheither analog or digital control.

Rack Mounted Suppliesfrom 1U to 6U, provide single ormultiple outputs and either full featuredfront panel controls, or a blank frontwith digital interfaces for integration inOEM systems.

X-Ray Generatorsconsist of integrated high voltage andlament power supplies and emissionloop control circuitry. They may bemodular or rack mounted.

X-Ray SourcesMonoblock X-Ray Sources integratean X-Ray tube with the generator andmeet stringent radiation leakagerequirements.

Application Specificproducts are designed to supportthe requirements of particular loadsor systems.

MODULES

1.5W2.5WMM Pages 4-6

3WMS Pages 7-8

4WPMT Pages 9-10

4W30WUM Pages 11-16

UM840 Pages 17-22

10WVPAK Pages 23-24MPS Pages 25-26MP Pages 27-28

12W230 Pages 29-30

20WMPS20W Pages 31-32

30WEPM Pages 33

V6 Pages 34-36

60WSMS Pages 37-38

60W125WUMW Pages 39-42

120WPCM Pages 43-44

200W/350WPTV Pages 45-46

300W1200WSLM Pages 47-49

RACK MOUNT

10W1200WSL Pages 50-53

30W205B Pages 54-55

225W210 Pages 56-57

1200WSL150KV Pages 58-59

2000WSL2KW Pages 60-62

SLS Pages 63-64

4kWSTA Pages 65-67

6kWSTR Pages 68-70

12kW100kWST Pages 71-74

X-RAY GENERATORS

3W260WXLG Pages 75-76

50W/65W/75WMNX Pages 77-80

50W/65W/75WMFX Pages 81-83

80W640WXRF Pages 84-85

300W1200WDXM Pages 86-89

DXB Pages 90-92

600W-1200WXLF Pages 93-94

1.8kW6.0kWXRV Pages 95-98XRVCController Page 197

3kW4kWDF/FF Pages 99-100

5kWVMX Pages 101-103

9kWMAMX Pages 104-105

24kW120kWCT Pages 106

X-RAY SOURCES

20W/50WXRB011 Pages 107-110

100WXRB80 Pages 111-113

XRB100 Pages 114-116

160WXRB101 Pages 117-119

200WXRB201 Pages 120-122


320WXRB301 Pages 126-128


400WXRB401 Pages 132-134

500WXRB501 Pages 135-137


700WXRB701 Pages 141-143

PORTABLE NDT (LORAD)LPX160 Pages 144-146

LPX200 Pages 147-149

LPX300 Pages 150-152

LPX1620Tube Stand Pages 153-154

LPXLaser Pointer Pages 155

APPLICATION SPECIFIC

Capacitor ChargingCCM Pages 156-157CCM1KW Pages 158-160

E Beam/IBeamEBM Pages 161-162EGM Pages 163-165FIBX Pages 166-167VS100 Pages 168-169

Electrostatic ChuckECHUCK Page 170

Electrophoresis/ElectrospinningCZE1000R Pages 171-172CZE2000 Pages 173-174

Image IntensifiersDGM Page 175

Mass SpecMCP Pages 176-177ML430 Pages 178-179ML1350 Pages 180-181MX2.5 Pages 182-183MX8 PLUS Pages 184-185MX10 Pages 186-187MX10 PLUS Pages 188-189MX20 Pages 190-191TOF3000 Pages 192-193

Photo MultiplierPMTS Page 194

Power Feed EquipmentPFE Page 195-196

ACCESSORIESXRVC Page 197SIC Pages 198-199HVD Page 200

Spellmans MM Series of high voltage power suppliesare low cost, general purpose, dc to dc converters withoutput voltages up to 15kV.

They are designed for direct PCB mounting. High reli-ability is incorporated into these compact and lightweightmodular blocks intended for customer designed productsat power levels up to 2.5W. The modules are fully encap-sulated in an ABS box and may be wave soldered.

The MM Series can be used with an external resistorfeedback loop to provide regulated outputs. See thefollowing pages for application diagrams illustrating arange of voltage regulated circuits using the MM highvoltage power supplies.

TYPICAL APPLICATIONSPhotomultiplier TubesSolid State DetectorsFlow SensorsAnalytical InstrumentsSpectral Source LampsInk Jet PrintersGas Chromatography

OPTIONS1.5W & 2.5W Modules

I Input to Output IsolationS Screened BoxC Continuous Short Circuit protection

1.5W Reversible ModuleS Screened BoxC Continuous Short Circuit protection

Customer Special Versions Other input and output voltage modules

can be supplied. Mechanical dimensions to meet customer

requirements are always considered wherestandard modules are not suitable.

Please call us to discuss your custom designrequirements.

OUTPUTS UP TO 15KV AT 1.5W OR 2.5W COMPACT SIZE LOW COST ARC AND SHORT-CIRCUIT PROTECTION POSITIVE OR NEGATIVE OUTPUTS OUTPUT VOLTAGE PROPORTIONAL TO INPUT VOLTAGE REVERSIBLE POLARITY MODULES AVAILABLE ARC FLASHOVER PROTECTION PCB MOUNTING OEM CUSTOMIZATION AVAILABLE

SPECIFICATIONSInput Voltage:

9Vdc, 12Vdc, or 24Vdc. Other input voltages(6Vdc to 28Vdc) available upon special order.

Input Current:Typically less than 1A at full output.

Output Voltage:Maximum voltages between 300V and 15kV areavailable (see tables). Output voltage is proportionalto the input voltage over the range 10% to 100%.Optionally, multiple outputs can also be supplied.

Output Power:1.5W continuous; 3W peak2.5W continuous; 5W peak

Output Ripple:Less than 0.2% p-p

Load Regulation:10% maximum.

Module Efficiency:55% to 70%

Operating Frequency:100kHz to 400kHz dependent on module type.

Dimensions:Case Size A and E:

0.79 H x 1.57 W x 1.57 D (20mm x 40mm x 40mm).Case Size B and F:

1.18 H x 1.97 W x 1.97 D (30mm x 50mm x 50mm).Case Size C:

1.38 H x 1.97 W x 2.99 D (35mm x 50mm x 76mm).Case Size D and G:

1.65 H x 2.99 W x 3.98 D (42mm x 76mm x 101mm).

Regulatory Approvals:Compliant to 2004/108/EC, the EMC Directive and2006/95/EC, the Low Voltage Directive.

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONMM 1.5W & 2.5W PCB MOUNTDC-DC CONVERTERSPAGE 1 OF 3

Corporate Headquarters

Hauppauge, New York USA+1-631-630-3000 FAX: +1-631-435-1620

e-mail: [email protected]

www.spellmanhv.com 128019-001 REV. ESpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company

For locations worldwide4

MM 1.5W SELECTION TABLEModel Output V Full Load l Ripple(max) Case

Number Vdc Max mA Average Vp-p SizeMM0.3*1.5W 300 5.0 0.6 A

MM0.5*1.5W 500 3.0 1.0 A

MM1*1.5W 1,000 1.5 2.0 A

MM1.5*1.5W 1,500 1.0 3.0 A

MM2*1.5W 2,000 0.75 4.0 A

MM3*1.5W 3,000 0.5 6.0 A

MM5*1.5W 5,000 0.3 10.0 B

MM10*1.5W 10,000 0.15 20.0 C

MM 2.5W SELECTION TABLEModel Output V Full Load l Ripple(max) Case

Number Vdc Max mA Average Vp-p SizeMM0.5*2.5W 500 5.0 1.0 B

MM1*2.5W 1,000 2.5 2.0 B

MM2*2.5W 2,000 1.25 4.0 B

MM3*2.5W 3,000 0.83 6.0 B

MM5*2.5W 5,000 0.5 10.0 C

MM10*2.5W 10,000 0.25 20.0 D

MM15*2.5W 15,000 0.17 30.0 D

MM 1.5W REVERSIBLE SELECTION TABLEModel Output V Full Load l Ripple(max) Case

Number Vdc Max mA Average Vp-p SizeMM0.5PN 500 3.0 1.0 E

MM1PN 1,000 1.5 2.0 E

MM1.5PN 1,500 1.0 3.0 E

MM2PN 2,000 0.75 4.0 F

MM3PN 3,000 0.5 6.0 F

MM5PN 5,000 0.3 10.0 F

MM10PN 10,000 0.1 20.0 G

*Specify P for positive polarity or N for negative polarity

*Specify P for positive polarity or N for negative polarity

Note: Polarity is achieved by grounding the opposite output pin.


APPLICATION NOTES

C1100F

CR112V

CR2

470

R12.2

Q1

Q2MM

GROUND

H.V. OUTPUT

+15VDC

IN

Q2

R12.2

Q1

MM

GROUND

H.V. OUTPUT

+12VDC

IN100

5K

Q2R12.2

Q1

MM

GROUND

H.V. OUTPUT

+12VDC

IN

100K

50K

+12VDC

100K

470

100K

470

10V REF

+12VDC

4.7K 0.1

1nF

Q3

47

30M

MM

GROUND

H.V. OUTPUT

IN

+12VDC

IN OUT

ADJ220

+12VDC

2K0.1F 0.1F

+

_

LM317MP

Circuit 1 This circuit allows control of the output voltage over its complete range and relies on a well regulated 12VDC Supply.

Circuit 2 This circuit is designed for fixed output voltages below the normal output voltage and has a line regulation of 5%/V (typical) change depending on the zener.

Circuit 3 This circuit achieves a load regulation of 0.01% (typical) and a line regulation of 0.01%(typical) controlled over the complete range. (N.E. -positive output shown -see notes)

C1 decouples ripple on the +15V rail. A lower output setting can be obtainedby substituting Zener diode CR1 with a lower voltage Zener CR2

Circuit 4 This circuit allows for a full variable output voltage with a built-in current limit and achieves a line regulation of 0.05% (typical)

Shown here are some dc drive circuit ideas to regulate thehigh voltage output. It is always a good idea to incorporatecurrent limiting as shown to allow for the occurrence of acontinuous high voltage short circuit. This is sensed by R1 inthe sample circuits.

NOTES The 1.5W MM module at full power draws a maximum of

250mA at 12V input (typically 180mA).

The 2.5W MM module at full power draws a maximum of380mA at 12V input (typically) 340mA).

Output voltage is approximately proportional to thedc input voltageallow for 1 to 2 volt drop across Q1.

Transistor Q1 may need a heat sink

The circuit shown in Circuit 3 is for positive output.Negative can be achieved with minimal changes inthe circuit configuration.

Please note that these circuits are suggestions only





For locations worldwide

5


OPTIONS OPTIONS

OPTIONS

VIEW ON PINS VIEW ON PINS

VIEW ON PINS

VIEW ON PINS

VIEW ON PINS

ISOLATEDOV

ISOLATEDOV

HV O/P

HV O/PFLY LEAD500mm

Input Leadthrough inserts

M3.5 screrwscsk heads onunderside

HVO/P

HVO/P

I/P

I/P

I/P

OV

16.5

38

35

5

5

3.6

35

43.6

89

C/I

101

100

64

20

76 30

19

42

12.7

14

89101

206476

100

19

42

40

30

6.3

50

50

35

27.9

32.5 20

20

20

20

105

5

5

5

50

3.5

16.5 13.9

33.5 27.9

35

35

40

40

40

30

512.7

12.7

50

50 40

9

38

1.5

31

640

76

69.6

4030.5

3.5

3.6

UP TO 3kV

HVO/P

HVO/P

I/P

I/P

ISOLATED OV

NYLONMETRICSTUDSM3x6

SCREEN

SCREEN

I/POV I/P

OV

I/P

I/P

OV

OV

O/PNEG

O/PNEG

I/P

I/P

OV

OV

O/PPOS

O/PPOS

OVO/P

OV

OV

I/POV

+VIN

POS HV O/PFLY LEAD500mm

NEG HV O/PFLY LEAD500mm

OV

+V IN

O/POV

O/P

OVO/P SCREEN

SCREEN

SCREEN

SCREEN

H/V O/PFLY LESD500mm

SCREEN

SCREEN

Input Leadthrough inserts

M3.5 screrwscsk heads onunderside

A

C D

G

E

F

B

Standard configurations of housings for the MM Series modules.Refer to case size reference in specifications on page 1.Available options are shown in color; RED= Screen GREEN= Isolated I/P to O/PRecommended hole size for pins- 1mm (case size A, B, E, F) 1.4mm (case size C.)






6

Spellmans MS Modules have been designed for printedcircuit board mounting with high reliability, small size andlight weight. Each module provides 3W of output power to3kV with well regulated low ripple, high stability and highvoltage in a versatile, compact cost-effective design. Themodules incorporate remote control and arc & short-circuitprotection. Radiated pickup is eliminated by sealing eachmodule in an aluminum enclosure.

TYPICAL APPLICATIONSPhotomultiplier TubesPrecision LensesImage IntensifiersNuclear InstrumentsSpectroscopy

OPTIONSP Preset Output VoltageC External ProgrammingI Isolated Input to Output

Isolation Voltage: 40V for units up to 1kV100V for units >1kV


+12Vdc 1V. Other input voltages also available.

Input Current:< 0.56A at full output.

Output Voltage:Continuously adjustable over each entire rangeModels available in either positive or negative polarity.See table for voltage ranges.

PAGE 1 OF 2

Line Regulation:< 0.005% for input change of 1 volt.

Load Regulation:< 0.05% for 100A to full load change. (at max. voltage)

Output Voltage Control:Option to be set at factory. Either:

1) Preset output voltage2) External control:

External potentiometer (5Kohm)Remote voltage programming 0-5V gives 0 to full output

Output Power: 3W continuous.Voltage Regulation:

Line: 0.005% for input change of 1 Volt.Load: 0.05% for 100A to full load change at

maximum voltage.

Ripple: < 0.01% p-p of full output voltage.Temperature:

Operating: 0C to +50C.Storage: -35C to +85C.

Temperature Coefficient: 50ppm/C typical.Stability:

< 0.05%/8 hrs at constant operating conditionsafter one hour warm-up.

Humidity: 0 to 90% non-condensing.Dimensions:

Up to 1000Vdc:.87H x 2.1W x 3.1D (23mm x 53mm x 78mm).

1000V to 3000Vdc:1.1H x 2.36W x 4.2D (28mm x 60mm x 106mm).

Weight:Up to 1000V: 0.2lb (80g).Over 1000V: 0.4lb (160g).


LOW COST OUTPUT VOLTAGES UP TO 3KV 3 WATTS POWER RATING REMOTE CONTROL POSITIVE OR NEGATIVE POLARITY ARC AND CONTINUOUS SHORT-CIRCUIT PROTECTED LOW STORED ENERGY HIGH RELIABILITY INTERNAL 5V REFERENCE AVAILABLE OEM CUSTOMIZATION AVAILABLE

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONMS 3W REGULATED PCB MOUNTHV POWER SUPPLY




www.spellmanhv.com 128018-001 REV. FSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


7

DRILL DIA FORPINS 1mm

3.07 [78]

0.91 [23]

DRILL DIA FORPINS 1mm

1.10 [28]

5V REF

CTRL

OV

+OV O/P

HV O/P

2.22 [56.5]

+12V

3.46 [88]

2.36 [60]5V REF

CTRL

OV

+ OV O/P

HV O/P

3.05 [77.47]

+12V

4.09 [104]

UNIT > 1000V UP TO 3000V

UNIT UP TO 1000V

0.26 [6.5]

0.26 [6.5]

0.57 [14.47]

SIDE VIEW

BOTTOM VIEW

SIDE VIEW

BOTTOM VIEW

0.50 [12.73]

2.09 [53]0.98 [25]

0.30 [7.5]

1.58 [40.03]

0.86 [21.7]

0.26 [6.5]

0.50 [12.73]1.57 [40.00]

0.85 [12.7]

MS SELECTION TABLEOUTPUT OUTPUT RIPPLE MODELVOLTAGE CURRENT V(V) (mA) (p-p)

300 10 0.03 MS0.3*500 6 0.05 MS0.5*750 4 0.075 MS0.75*

1000 3 0.10 MS1*1500 2 0.15 MS1.5*2000 1.5 0.20 MS2*2500 1.2 0.25 MS2.5*3000 1 0.30 MS3*

DIMENSIONS: in.[mm]

*Specify P for positive polarity or N for negative polarity.

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONMS 3W REGULATED PCB MOUNTHV POWER SUPPLY PAGE 2 OF 2

View on pins.Recommended hole size

for terminals 1mm.






OF 2

Spellmans Bertan brand of PMT modular high voltagepower supplies offer well regulated, fixed polarity outputsup to 7.5kV, which operate off a low voltage DC inputvoltage. These fully enclosed modules are specificallydesigned with proprietary linear power conversion tech-niques to provide exceptionally low ripple and noise.The PMT is ideal for precision applications including:photomultiplier tubes, solid state detectors andultrasonic transducers.

The output voltage can be controlled by either a localinternal potentiometer or by a customer provided groundreferenced signal for remote operation. Additionally aground referenced output voltage monitor signal isprovided. The PMT can be powered from either a singlepositive voltage source or a split voltage source,providing application flexibility.

TYPICAL APPLICATIONSPhotomultiplier tubesUltrasonic transducersSolid state detectors


Option 1: +24Vdc to +30Vdc @ 400mAOption 3: 12Vdc to 18Vdc @ 400mAspecify -1 (option 1) or -3 (option 3) when ordering

Efficiency:50%, typical

Output Polarity:Positive or negative, specify at time of order

Output Voltage:See model selection table

Output Current:See model selection table

Output Power:1.875W, 2W, 2.5W, 3W, 4W

Voltage Regulation:Line: 0.001% of rated output voltage for a

+1% input line change

Load:0.001% of rated output voltage for afull load change

Ripple:See model selection table

Stability:0.005% per hour, 0.02% per 8 hours, after a 1/2hour warm up

Accuracy:Remote Programming (2% of setting, +0.5% of maximum)Voltage Monitor 2%

Temperature Coefficient:50ppm/C

Arc/Short Circuit:All units are fully arc and short circuit protected and willlimit continuous short circuit output current to less than150% of maximum rated output current.

Operating Temperature0C to +50C

Storage Temperature:-40C to +85C

Humidity:20% to 85% RH, non-condensing

Interface Connector:12 position card edge connector, mate provided with unit

Output Connector:A captive 24 (610mm) of RG-59B/U shielded cable,unterminated is provided

Cooling:Convection cooled.

Dimensions:3.875W X 1.25H X 6.3125D (98mm x32mm x 160mm)

Weight:2.0 pounds (0.9kg)

Regulatory Approvals:Compliant to 2004/108/EC, the EMC Directive and2006/95/EC, the Low Voltage Directive. UL/CUL recognized,File E137710. Compliant to 2002/95/EC, RoHS

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NHIGH VOLTAGEMODULEPMT

500V TO 7.5KV @ 1.9 TO 4 WATTS LOW COST MODULAR DESIGN EXCELLENT STABILITY & REGULATION LOW NOISE & RIPPLE ARC & SHORT CIRCUIT PROTECTED CE LISTED, UL RECOGNIZED

AND RoHS COMPLIANT




www.spellmanhv.com 128040-001 REV. RSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


9

INTERFACE CONNECTOR

TOP VIEW

BOTTOM VIEW

FRONT VIEW

HVAD

JUST

.50 [12.7]

5.31 [134]

5.75 [146]

.15 DIA.THRU. 3PL

.44 [11]

1.94 [49.2].25 [6.35]

.25 [6.35]

.05[1.27]

.14[3.56]1.27[32.2]

.56 [14.2]

3.88 [98]

3.38 [85.8]

PAGE 2 OF 2

DIMENSIONS: in.[mm]

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NHIGH VOLTAGEMODULEPMT

VOLTAGE MONITOR TABLEModel Signal Voltage Signal ImpedancePMT-05C-P,N 0 to 5 volts 50k ohmsPMT-10C-P,N 0 to 1 volts 10k ohmsPMT-20C-P,N 0 to 2 volts 25k ohmsPMT-30C-P,N 0 to 3 volts 30k ohmsPMT-50C-P,N 0 to 5 volts 100k ohmsPMT-75C-P,N 0 to 7.5 volts 200k ohms

Note: The Voltage Monitor polarity matches thehigh voltage output polarity

+ Power Input +24Vdc to +30Vdc or +12Vdc to +18Vdc 3&4 3 & 4 & 5- Power Input -12Vdc to -18Vdc n/a 2 & 6Ground Ground 1 & 12 1 & 12Voltage Monitor See Voltage Monitor Table 11 11+9Vdc +9.0Vdc, 10mA maximum 10 10ReferenceVoltage Program 0 to 9Vdc = 0 to 100% rated output, 8 8Input 100k ZinLocal Voltage Internal program potentiometer wiper, 9 9Program 0 to 9Vdc

Signal Parameters Option 1 Option 3Pin Number Pin Number

MODEL SELECTION TABLEModel Output Voltage Output Current Ripple (Vpp)PMT-05C-P,N 0 to 500V 0 to 8mA 5mVPMT-10C-P,N 0 to 1kV 0 to 4mA 4mVPMT-20C-P,N 0 to 2kV 0 to 2mA 2mVPMT-30C-P,N 0 to 3kV 0 to 1mA 6mVPMT-50C-P,N 0 to 5kV 0 to 0.5mA 10mVPMT-75C-P,N 0 to 7.5kV 0 to 0.25mA 100mV

Specify P for positive polarity or N for negative polarity




www.spellmanhv.com 128040-001 REV. RSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


10

OF 6

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NHIGH VOLTAGEMODULE

8 VOLTAGE RANGES FROM 62.5V TO 6KV,FIXED NEGATIVE OR POSITIVE POLARITY

AVAILABLE OUTPUT POWER INCREMENTS OF4, 20 AND 30 WATTS

VOLTAGE/CURRENT REGULATION WITHAUTOMATIC CROSSOVER CONTROL

VOLTAGE AND CURRENT MONITOR SIGNALS FULLY ARC AND SHORT CIRCUIT PROTECTED PRECISION +5V REFERENCE OUTPUT COMPREHENSIVE STANDARD INTERFACE CE LISTED, UL RECOGNIZED AND RoHS COMPLIANT

Form, Fit and Function Design:Spellmans UM Series of printed circuit board mountable, highvoltage modules offer a form, fit and function replacement forpresently available commercially made units, while providingadditional features and benefits at competitive pricing. Utilizingproprietary power conversion technology and Spellman's sixdecades of high voltage experience, these SMT based highvoltage modules provide improved performance/reliability andeasier system integration at a lower cost when compared tothe competition.

Advanced Power Conversion Topology:UM converters use a proprietary zero voltage switchingpower conversion topology providing exceptional efficiencyand inherent low noise and ripple. Radiated emissions arereduced compared to conventional switching topologies,minimizing or even eliminating the need to shield the unitfrom adjacent circuitry.

The high voltage output is generated using a ferrite corehigh voltage step up transformer which feeds the outputcircuitry. Units at 1kV or higher utilize an arrangement of halfwave Cockcroft-Walton voltage multiplier stages to obtain thespecified high voltage output, while lower voltage units usea robust rectification and filter circuit.

Due to the fixed, high frequency conversion rate the outputcapacitance is small resulting in minimal stored energy.Through the use of generously rated surge limiting resistorsand a fast acting current loop, all units are fully arc and shortcircuit protected.

Control and Regulation:The actual output voltage generated is sampled via a highimpedance divider to create a voltage feedback signal. Acurrent feedback signal is created via a current sense resistorin the low end return of the high voltage output circuitry. Thesetwo accurate ground referenced feedback signals are used toprecisely regulate and control the units in addition to externalmonitoring purposes.

Due to the UMs unique converter topology it can providefull current into low impedance loads or even a short circuit.Standard units limit at 103% of maximum rated output current.

Standard Interface:The Spellman UM Series interface provides current program-ming capability and positive polarity, buffered, low output imped-ance voltage and current monitor signals (zero to +4.64Vdcequals zero to full scale rated). A voltage programming input isprovided where 0 to +4.64Vdc equals 0 to 100% of rated voltage.

Current programmability allows the user to set where theunit will current limit, anywhere from 0 to 100% of maximumrated current. This feature is beneficial where less than fulloutput current is desired, like in the case of protecting asensitive load.

The buffered low impedance voltage and current monitorsignals can drive external circuitry directly, while minimizingloading and pickup effects. These features save the user theexpense and implementation of external interface bufferingcircuitry while improving overall signal integrity.

This standard interface is made available via a row of 13pins with 0.1 pin spacing. A legacy interface (7 pins on a0.2 spacing) that is compatible with presently availablecommercially made units can be provided by ordering theL option.

Mechanical and Environmental Considerations:The UM Series are solid encapsulated, printed circuit boardmountable, plastic cased converters measuring only 2.97 X1.5 X 0.83 (75.4mm X 38.1mm X 21.1mm). All units areencapsulated using a silicon based potting material which isconsiderably lighter in weight than epoxy. Two isolated, nongrounded 2-56 machine screws thread into the module tosecurely mount it to the printed circuit board, relieving anystress on the interface pins. Mounting plates, brackets andflanged mounting options are also available

Regulatory Approvals:Compliant to 2004/108/EC, the EMC Directive and2006/95/EC, the Low Voltage Directive. UL/CUL recog-nized, File E227588. Compliant to 2002/95/EC, RoHS.

UM

www.spellmanhv.com/manuals/UM




www.spellmanhv.com 128068-001 REV. JSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


11

OF 6

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NUM HIGH VOLTAGEMODULESPECIFICATIONSInput Voltage:

12Vdc for 4W, 24Vdc for 20W and 30W

Nominal Voltage Range:11Vdc to 30Vdc for 4W, 23Vdc to 30Vdc for 20W and 30W

Input Current: (typical)Disabled: 30mANo load: 90mAFull load:4 watt units: 0.5A20 watt units: 1.0A30 watt units: 1.5A

Efficiency:80-85%, typical

Voltage Regulation:Line:

Standard Interface ConnectionsSeventeen (17) gold plated 0.025 (0.64mm) square pinssuitable for direct PCB mounting. See mechanical drawingfor location and spacing details.

Programming and Monitor SignalsVoltage and current programming is done via positive polari-ty, high input impedance, 0 to 4.64Vdc signals.Voltage and current monitors are positive polarity, bufferedlow output impedance 0 to 4.64Vdc signals.

I MonThe I Mon signal is a true output current monitoring signal.All internal offsets due to feedback dividercurrents have been compensated for.

Signature ResistorA unique identifying signature resistor for each type of unit isconnected from Pin 1A to ground. Details if desired areavailable upon request.

Legacy Interface ConnectionsEleven (11) gold plated 0.025 (0.64mm) square pins suit-able for direct PCB mounting. See mechanical drawing forlocation and spacing details.

I Sense SignalThe I Sense signal polarity is opposite of the output polarityof the module. This signal is protected via a transorb andprovided via a series connected 47k isolation resistor.Internal HV dividers create a small, linear offset voltage onthe I sense signal that can be compensated for.

Adhesive Backed Heat SinkUM modules are provided with an uninstalled top mountedadhesive backed heat sink. Label removal is not required ifthe customer elects to install and use the provided heat sink.

The UM's internal power dissipation causes a case tem-perature rise. If the case exceeds 65C, the unit needsexternal cooling (fan or heat sink). Even if the case isbelow 65C, it is prudent to keep it much lower. Like asemiconductor device; the hotter it is, the shorter the life.For every 10C reduction of temperature the lifetime will beincreased by a factor of 2.35. The thermal resistance frominternal circuitry to ambient is 8C/watt without a heat sink(still air). This reduces to 6C/watt with the heat sink.

Example:Assuming 80% efficiency for a 20 watt UM module, the5 watts of internal power dissipation would create a 40Crise. Using the heat sink there would be only a 30C rise.Ultimately it is up to the user to determine what coolingmethod is applicable for their application, but the generalrecommendation is to keep the module as cool as possible.

PAGE 3 OF 6

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NUM HIGH VOLTAGEMODULE

LEGACY INTERFACE (L OPTION)PIN SIGNAL PARAMETERS

1 Power Ground Return +12Vdc or +24Vdc power return/HV return2 + Power Input +12Vdc or +24Vdc power input3 I Sense See I Sense text and tables for details4 Enable Input Low (2V)=HV ON5 Signal Ground Signal Ground6 Remote Adjust Positive Polarity Unit:

0 to +4.64VDC = 0 to 100% rated voltage,Zin >1M

Negative Polarity Unit:+5VDC to 0.36V = 0 to 100% rated voltage,Zin >100k

7 +5V Reference Output +5Vdc 0.5%, 50ppm/C. Zout =4758 HV Ground Return HV Ground Return9 E Out Monitor 10:1 ratio for models below 1kV, 100:1 ratio for models

1kV and above. Polarity of Voltage Monitor signal equalspolarity of unit. Accuracy is 2%, 100ppm/C. Calibratedwith DVM with 10M input impedance

10 HV Output HV Output11 HV Output HV Output

STANDARD INTERFACEPIN SIGNAL PARAMETERS

1 Power Ground Return +12Vdc or +24Vdc power return/HV return1A Signature Resistor Unique Identifying resistor connected to ground2 + Power Input +12Vdc or +24Vdc power input

2A N/C3 I Sense See I Sense text and tables

3A I Mon 0 to 4.64Vdc = 0 to 100% rated output. Zout < 10k4 Enable Input Low (2V)=HV ON4A V Mon 0 to 4.64Vdc = 0 to 100% rated output. Zout < 10k5 Signal Ground Signal Ground

5A I Pgm 0 to 4.64Vdc = 0 to 100% rated output. Zin > 47kLeave open for preset current limit @103% of rated output current

6 Remote Adjust Positive Polarity Unit:0 to +4.64VDC = 0 to 100% rated voltage,Zin >1M


Leave open if pin 6A (VPgm) is used for programming6A V Pgm 0 to 4.64Vdc = 0 to 100% rated voltage. Zin > 100k

Leave open if pin 6 (remote adjust) is used for programming

7 +5V Reference Output +5Vdc 0.5%, 50ppm/C. Zout =4758 HV Ground Return HV Ground Return9 E Out Monitor 10:1 ratio for models below 1kV, 100:1 ratio for models

1kV and above. Polarity of Voltage Monitor signal equalspolarity of unit. Accuracy is 2%, 100ppm/C. Calibratedwith DVM with 10M input impedance

10 HV Output HV Output11 HV Output HV Output

Power Ground Return, Signal Ground and HV Ground Return are connectedinternally. For best performance they should not be connected externally.

Grayed out signals are provided for backward legacy compatability and their useis not required







1.52 .02(38.61mm 0.5mm)

13

OF 6

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NUM HIGH VOLTAGEMODULEUM OPTIONSC OptionFast Rise Time Applications-If applications demand a power supply that is optimized for fast rise time/low overshoot requirements,then the C Option should be considered. A Hysteretic control circuit is employed providing improvedperformance in these unique applications with higher ripple observed (1% Vpp typical). If used forcapacitor charging, a Spellman Capacitor Charging Questionnaire should be filled out to assure allaspects of the intended usage is understood assuring the appropriate unit is provided. Speak to aSpellman sales person for more details.

T OptionLow Temperature Coefficient-The T Option offers the UM with an improved temperature coefficient. The standard voltagefeedback divider is replaced with one having a superior temperature coefficient, resulting ina unit with 25ppm/C (typical) temperature coefficient.

B OptionTerminal Block-The B Option provides terminalblock connections for both thecustomer interface and high volt-age output/return. This featurecan be helpful in situationswhere frequent wiringchanges areanticipated,as in a testingor prototypeenvironment.

M OptionMu Metal Shield-UM modules can be fittedwith an adhesive backedMu Metal foil shield to helpprotect sensitive adjacentcircuitry.

A OptionAdapter Board-Spellmans UM module can befitted with an adapter board thatwill allow a drop in replacementfor other commerciallyavailable modules of aphysically larger size, whileproviding identical functionalitywith superior performance.

PHYSICAL INTERFACING

SHIELDING

Same as standard unit.See page 6 of 6 for dimensional drawings

Maximum short circuitdischarge rate:

CV22

C = Output capacitance of unitC ext = External capacitanceV = Maximum rated voltagef = Frequency of dischargeT = Nominal output currenttR = Rise time

(f)

OF 6

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NUM HIGH VOLTAGEMODULESHIELDING continued

S OptionRF Tight Shielded Can-The S Option mounts the UMmodule inside of a flanged RFtight aluminum can.

CHASSIS MOUNTING

E2 OptionEared Mounting Plate-An eared mounting plate isaffixed to the top surface ofthe UM module allowingsimple chassismounting ofunits orderedwith the AdapterBoard (A Option).

E OptionEared Mounting Plate-An eared mounting plateis affixed to the topsurface of the UMmodule allowingsimple chassismounting of unit.

1.16 (29.5)

.56 (14.3)

1.50 (38.1)

.10 (2.5)

.10 (2.5)

.19 (4.7)

.40 (10.2)

.25 (6.4)

.38 (9.5)

.84 (21.3)

2.00 (50.8)

.40 (10.2)

.10 (2.5) TYP. 12X

.28 (7.1) TYP. 13X

4.38 (111.3)

3.20 (81.3)

4.00 (101.6)

4.75 (120.7 )MOUNTING HOLES:.156 DIA.TYP. 4X

.06 (1.6)

PINS:GOLD-PLATED0.025 (0.64) SQ.

1.50 (38.1)

.89 (22.6) .57 (14.47)

11A22A33A44A55A66A7

11

8

MOUNTING HOLES:.156 DIA. TYP. 4X

.64 (16.3)

.52 (13.1)

.96 (24.4)

.27 (6.9)

.15 (3.8)

3.62 (91.9).19 (4.7)

3.99 (101.3)

4.36 (110.7)

.15 (3.8).27 (6.9)

.19 (4.8)

4.74 (120.4)

.96 (24.4)1.50 (38.1)

.62 (15.7)

.95 (24.2)1.67 (42.5)

.10 (2.5)

.81 (20.5)

.89 (22.5)

MOUNTING HOLES:.156 DIA. TYP. 4X

.06 (1.6)






15

PINS:GOLD-PLATED 0.025

(0.64) SQ.

PINOUT DETAIL

.125 (3.17) TYP. 7X2.450 (62.2)

.775 ( 19.68)

.200 (5.08)

.100 (2.54)

.100 (2.54).875 (22.22)

1.100 (27.94)1.50 (38.1)

.83 (21.1) .57 (14.47) 2.97 (74.6)

.200 (5.08) TYP. 6X

MOUNTING HOLES:2-56 UNC X .187 (4.74) DEEP 2X

1

2

3

4

5

6

7

11

8

.150 (3.81)

1

2

3

4

5

6

7

PAGE 6 OF 6

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NUM HIGH VOLTAGEMODULE

OPTION ORDERING EXAMPLE

UM4P30/L/EModel

VoltagePolarity

PowerOption

Option

DIMENSIONS: in.[mm]

11 PIN - Legacy Interface

17 PIN - Standard Interface ORDERING INFORMATIONVoltage 0 to 62.5Vdc 0.062

0 to 125Vdc 0.1250 to 250Vdc 0.250 to 500Vdc 0.50 to 1000Vdc 10 to 2000Vdc 20 to 4000Vdc 40 to 6000Vdc 6

Polarity Positive PNegative N

Power Watts Output 4Watts Output 20Watts Output 30

STANDARD UNIT ORDERING EXAMPLE

UM1N20Model

VoltagePolarity

Power

OPTION ORDERING INFORMATIONOPTION OPTION CODELegacy Interface LFast Rise Time CLow Temperature Coefficient TAdapter Board ATerminal Block BMu Metal Shield MRF Tight Shielded Can SEared Mounting Plate EEared Mounting Plate/Adapter Board E2


(0.64) SQ.

PINOUT DETAIL

.125 (3.17) TYP. 7X2.450 (62.2)

.775 ( 19.68)

.200 (5.08)

.100 (2.54)

.100 (2.54).875 (22.22)

1.100 (27.94)1.50 (38.1)

.83 (21.1) .57 (14.47) 2.97 (74.6)

.200 (5.08) TYP. 6X


1

2

3

4

5

6

7

11

8

.150 (3.81)

1

2

3

4

5

6

7

PINOUT DETAIL


(0.64) SQ.


.125 (3.17) TYP. 13X2.450 (62.2)

.775 ( 19.68)

.200 (5.08)

.100 (2.54)

.100 (2.54).875 (22.22)

1.100 (27.94)

11A22A33A44A55A66A7

11

8

1.50 (38.1)

.84 (21.3) .57 (14.47) 2.97 (74.6)

.100 (2.54) TYP. 12X

.150 (3.81)

11A22A33A44A55A66A7






OF 6

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION

9 VOLTAGE RANGES FROM 8KV TO 40KV,FIXED NEGATIVE OR POSITIVE POLARITY

AVAILABLE OUTPUT POWER INCREMENTS OF4, 15 AND 30 WATTS

VOLTAGE/CURRENT REGULATION WITHAUTOMATIC CROSSOVER CONTROL

VOLTAGE AND CURRENT MONITOR SIGNALS FULLY ARC AND SHORT CIRCUIT PROTECTED PRECISION +5V REFERENCE OUTPUT COMPREHENSIVE STANDARD INTERFACE CE LISTED AND RoHS COMPLIANT

Form, Fit and Function Design:Spellmans UM Series of printed circuit board mountable, highvoltage modules offer a form, fit and function replacement forpresently available commercially made units, while providingadditional features and benefits at competitive pricing. Utilizingproprietary power conversion technology and Spellman's sixdecades of high voltage experience, these SMT based highvoltage modules provide improved performance/reliability andeasier system integration at a lower cost when compared tothe competition.

Advanced Power Conversion Topology:UM converters use a proprietary zero voltage switchingpower conversion topology providing exceptional efficiencyand inherent low noise and ripple. Radiated emissions arereduced compared to conventional switching topologies,minimizing or even eliminating the need to shield the unitfrom adjacent circuitry.

The high voltage output is generated using a ferrite corehigh voltage step up transformer which feeds a half waveCockcroft-Walton voltage multiplier to obtain the specifiedhigh voltage output.

Due to the fixed, high frequency conversion rate the outputcapacitance is small resulting in minimal stored energy.Through the use of generously rated surge limiting resistorsand a fast acting current loop, all units are fully arc and shortcircuit protected.

Control and Regulation:The actual output voltage generated is sampled via a highimpedance divider to create a voltage feedback signal. Acurrent feedback signal is created via a current sense resistorin the low end return of the high voltage output circuitry. Thesetwo accurate ground referenced feedback signals are used toprecisely regulate and control the units in addition to externalmonitoring purposes.

Due to the UMs unique converter topology it can providefull current into low impedance loads or even a short circuit.Standard units limit at 103% of maximum rated output current.

Standard Interface:The Spellman UM Series interface provides current program-ming capability and positive polarity, buffered, low output imped-ance voltage and current monitor signals (zero to +4.64Vdcequals zero to full scale rated). A voltage programming input isprovided where 0 to +4.64Vdc equals 0 to 100% of rated voltage.

Current programmability allows the user to set where theunit will current limit, anywhere from 0 to 100% of maximumrated current. This feature is beneficial where less than fulloutput current is desired, like in the case of protecting asensitive load.

The buffered low impedance voltage and current monitorsignals can drive external circuitry directly, while minimizingloading and pickup effects. These features save the user theexpense and implementation of external interface bufferingcircuitry while improving overall signal integrity.

This standard interface is made available via a row of 13pins with 0.1 pin spacing. A legacy interface (7 pins on a0.2 spacing) that is compatible with presently availablecommercially made units can be provided by ordering theL option.

Mechanical and Environmental Considerations:The UM Series are solid encapsulated, printed circuit boardmountable, plastic cased converters. All units are encapsulat-ed using a silicon based potting material which is consider-ably lighter in weight than epoxy. Isolated, non grounded 2-56machine screws thread into the module to securely mount it tothe printed circuit board, relieving any stress on the interfacepins. Mounting plates, brackets and flanged mounting optionsare also available. High voltage output is provided via a 36(914.4mm) minimum length of appropriately rated high volt-age wire.

Regulatory Approvals:Compliant to 2004/108/EC, the EMC Directive and2006/95/EC, the Low Voltage Directive. Compliant to2002/95/EC, RoHS. UL/CUL recognized, File E227588.

UM8-40 HIGH VOLTAGEMODULE

www.spellmanhv.com/manuals/UM8-40






17

OF 6

Grayed text indicates Legacy interface signals.

UM 4W, 8kV TO 40kV SELECTION TABLEModel Output V Output Current Ripple(max) Output Arc Limiting I Sense Scaling High Voltage

Number %Vp-p Capacitance Resistance Full Scale Signal Divider ResistanceUM8*4 0 to 8kV 0.5mA 0.05 6830pF 50k 5V 200MUM10*4 0 to 10kV 0.4mA 0.05 4380pF 50k 2.4V 300MUM12*4 0 to 12kV 0.333mA 0.05 4380pF 50k 3.33V 300MUM15*4 0 to 15kV 0.266mA 0.05 3220pF 100k 1.69V 400MUM20*4 0 to 20kV 0.2mA 0.05 2310pF 100k 1.316V 550MUM25*4 0 to 25kV 0.16mA 0.05 1540pF 100k 1.1V 800MUM30*4 0 to 30kV 0.133mA 0.05 1370pF 120k 0.95V 900MUM35*4 0 to 35kV 0.115mA 0.05 1370pF 140k 0.72V 900MUM40*4 0 to 40kV 0.1mA 0.05 1370pF 140k 1.3V 900M


Number %Vp-p Capacitance Resistance Full Scale Signal Divider ResistanceUM8*15 0 to 8kV 1.875mA 0.05 6830pF 50k 3.75V 200MUM10*15 0 to 10kV 1.5mA 0.05 4380pF 50k 8.152V 300MUM12*15 0 to 12kV 1.25mA 0.05 4380pF 50k 5V 300MUM15*15 0 to 15kV 1mA 0.05 3220pF 100k 5.53V 400MUM20*15 0 to 20kV 0.75mA 0.05 2310pF 100k 4.21V 550MUM25*15 0 to 25kV 0.6mA 0.05 1540pF 100k 3.42V 800MUM30*15 0 to 30kV 0.5mA 0.05 1370pF 120k 2.89V 900MUM35*15 0 to 35kV 0.429mA 0.05 1370pF 140k 2.39V 900MUM40*15 0 to 40kV 0.375mA 0.05 1370pF 140k 4.21V 900M


Number %Vp-p Capacitance Resistance Full Scale Signal Divider ResistanceUM8*30 0 to 8kV 3.75mA 0.05 6830pF 50k 5.36V 200MUM10*30 0 to 10kV 3mA 0.05 4380pF 50k 7.87V 300MUM12*30 0 to 12kV 2.5mA 0.05 4380pF 50k 5V 300MUM15*30 0 to 15kV 2mA 0.06 3220pF 100k 5.29V 400MUM20*30 0 to 20kV 1.5mA 0.06 2310pF 100k 8.15V 550MUM25*30 0 to 25kV 1.2mA 0.06 1540pF 100k 6.56V 800MUM30*30 0 to 30kV 1mA 0.06 1370pF 120k 5.52V 900MUM35*30 0 to 35kV 0.857mA 0.05 1370pF 140k 4.66V 900MUM40*30 0 to 40kV 0.75mA 0.05 1370pF 140k 8.15V 900M

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONUM8-40 HIGH VOLTAGEMODULESPECIFICATIONSInput Voltage:

12Vdc for 4W, 24Vdc for 15W and 30WNominal Voltage Range:

11Vdc to 30Vdc for 4W, 23Vdc to 30Vdc for 15W and 30W4W units can operate at 24Vdc input with noderatings or damage to unit

Input Current: (typical)Disabled: 10mA @ 24VdcFull output, no load: 160mA @ 24Vdc, 300mA @ 12VdcFull output, full load:

4 watt units: 330mA @ 24Vdc, 640mA @ 12Vdc15 watt units: 850mA @ 24Vdc30 watt units: 1590mA @ 24Vdc

Voltage Regulation:Line:

OF 6

Standard Interface ConnectionsFifteen (15) gold plated 0.025 (0.64mm) squarepins suitable for direct PCB mounting.

Legacy Interface ConnectionsNine (9) gold plated 0.025 (0.64mm) square pinssuitable for direct PCB mounting.

Programming and Monitor SignalsVoltage and current programming is done via positivepolarity, high input impedance, 0 to 4.64Vdc signals.Voltage and current monitors are positive polarity,buffered low output impedance 0 to 4.64Vdc signals.

I MonThe I Mon signal is a true output current monitoringsignal. All internal offsets due to feedback dividercurrents have been compensated for.

Signature ResistorA unique identifying signature resistor for each typeof unit is connected from Pin 1A to ground. Details ifdesired are available upon request.

I Sense SignalThe polarity of the I Sense signal is opposite of thepolarity of the output voltage of the unit that generatedit. So a positive output polarity unit creates a negativepolarity current monitor signal; while a negative outputpolarity unit creates a positive polarity current monitor-ing signal. This signal is clamped to ground internallyvia a bidirectional transient protection device and thesignal is made available via a series connected 47kisolation resistor. Internal HV dividers create a small,linear offset voltage on this current monitor signal thatcan be compensated for.

OT OutputThe unit is protected by an internal thermostat that willshut the unit off if the case temperature exceeds 65C.The OT Output signal will change states indicating anover temperature fault has occurred. In order to clear theOT signal and re-enable the unit, the temperature has todrop below 55 degrees C and input power needs to berecycled. For details on unit cooling requirements and theOT Output signal please see the operators manual.

LEGACY INTERFACE (L OPTION)PIN SIGNAL PARAMETERS

1 Power Ground Return +12Vdc or +24Vdc power return2 + Power Input +12Vdc or +24Vdc power input3 I Sense See I Sense text and tables for details4 Enable Input Low (2V)=HV ON5 Signal Ground Signal Ground6 Remote Adjust Positive Polarity Unit:

0 to +4.64VDC = 0 to 100% rated voltage,Zin >1M


7 +5V Reference Output +5Vdc 1%, 25ppm/C. Zout =4758 HV Ground Return HV Ground Return

9 E Out Monitor 1000:1 ratio. Polarity of Voltage Monitor signal equalspolarity of unit. Accuracy is 2%, 100ppm/C. Calibratedwith DVM with 10M input impedance

STANDARD INTERFACEPIN SIGNAL PARAMETERS

1 Power Ground Return +12Vdc or +24Vdc power return/HV return1A Signature Resistor Unique Identifying resistor connected to ground2 + Power Input +12Vdc or +24Vdc power input

2A OT Output +5Vdc @ 1mA = Over Temp fault3 I Sense See I Sense text and tables for details

3A I Mon 0 to 4.64Vdc = 0 to 100% rated output. Zout < 10k4 Enable Input Low (2V)=HV ON4A V Mon 0 to 4.64Vdc = 0 to 100% rated output. Zout < 10k5 Signal Ground Signal Ground

5A I Pgm 0 to 4.64Vdc = 0 to 100% rated output. Zin > 47kLeave open for preset current limit @103% of rated output current

6 Remote Adjust Positive Polarity Unit:0 to +4.64VDC = 0 to 100% rated voltage,Zin >1M


Leave open if pin 6A (VPgm) is used for programming6A V Pgm 0 to 4.64Vdc = 0 to 100% rated voltage. Zin > 100k

Leave open if pin 6 (remote adjust) is used for programming7 +5V Reference Output +5Vdc 1%, 25ppm/C. Zout =475

8 HV Ground Return HV Ground Return

9 E Out Monitor 1000:1 ratio. Polarity of Voltage Monitor signal equalspolarity of unit. Accuracy is 2%, 100ppm/C. Calibratedwith DVM with 10M input impedance


Grayed out signals are provided for backward legacy compatabilityand their use is not required.


Standard Interface Legacy Interface

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONUM8-40 HIGH VOLTAGEMODULE






See mechanical drawing for location and spacing details

19

OF 6

UM8-40 OPTIONSC OptionFast Rise Time Applications-If applications demand a power supply that is optimized for fast rise time requirements, then the COption should be considered. If used for capacitor charging, a Spellman Capacitor ChargingQuestionnaire should be filled out to assure all aspects of the intended usage is understood assuringthe appropriate unit is provided. Speak to a Spellman sales person for more details.

T OptionLow Temperature Coefficient-The T Option offers the UM with an improved temperature coefficient. The standard voltagefeedback divider is replaced with one having a superior temperature coefficient, resulting ina unit with 25ppm/C (typical) temperature coefficient.

Maximum short circuitdischarge rate:

CV22

C = Output capacitance of unitC ext = External capacitanceV = Maximum rated voltagef = Frequency of dischargeT = Nominal output currenttR = Rise time

(f)

OF 6

CHASSIS MOUNTING OPTION

PINS:GOLD-PLATED 0.025(0.64) SQ.

MOUNTING HOLES:.156 DIA. TYP 4X

11A22A33A44A55A66A7

1.60 (40.64)UM8/12UM15/20

1.50 (38.10)

1.20 (30.45)

UM8/12UM15/20

.99 (25.03)

.55 (13.92)

UM25/40 8.00 (203.20)UM25/40 7.62 (193.55)

UM15/20 5.74 (145.80)UM15/20 5.36 (136.14)

UM8/12 4.74 (120.40)UM8/12 4.36 (110.74)

.19 (4.83)

.200 (5.08) .27 (6.86)

.65 (16.38)

.52 (13.21)

1.06 (26.92) UM8/12UM15/20

.96 (24.38)

.062 (1.57)

UM15/20UM8/12

OPTION ORDERING EXAMPLE

UM25P15/L/EModel

VoltagePolarity

PowerOption

Option

ORDERING INFORMATIONVoltage 0 to 8kV 8

0 to 10kV 100 to 12kV 120 to 15kV 150 to 20kV 200 to 25kV 250 to 30kV 300 to 35kV 350 to 40kV 40

Polarity Positive PNegative N

Power Watts Output 4Watts Output 15Watts Output 30

STANDARD UNIT ORDERING EXAMPLE

UM30N30Model

VoltagePolarity

Power

OPTION ORDERING INFORMATIONOPTION OPTION CODELegacy Interface LFast Rise Time CLow Temperature Coefficient TMu Metal Shield MRF Tight Shielded Can SEared Mounting Plate ETerminal Block B







M OptionMu Metal Shield-UM modules can be fitted with an adhesivebacked Mu Metal foil shield to help protectsensitive adjacent circuitry.

SHIELDING OPTIONS (CONT)

Same as standard unit.See page 6 of 6 for dimensional drawings

E OptionEared Mounting Plate-An eared mounting plate is affixed to thetop surface of the UM module allowingsimple chassis mounting of unit.

21

OF 6

DIMENSIONS: in.[mm]15 PIN - Standard Interface

PINOUT DETAIL

PINOUT DETAIL


(0.64) SQ.

CABLE:DIA. 0.17536.00 (914.4)MIN. LENGTH

MOUNTING HOLES:2-56 UNC X .187 (4.74) DEEP

.125 (3.18) TYP. 13X.100 (2.54)

UM25/40 6.200 (157.48)

UM15/20 4.160 (105.66)

UM15/20.180 (4.57)

UM15/20 4.700 (119.36)

UM8/12 3.175 (80.55)UM8/12 3.700 (93.98)

UM25/40 6.980 (176.78)

.235 (5.97)

UM15/20.180 (4.57)

.235 (5.97)

1.100 (27.94)

11A22A33A44A55A66A7

1.60 (40.64)

UM8/12UM15/20

1.50 (38.10)

UM25/401.14 (28.87)

UM8/12UM15/20.99 (25.03)

UM8/12UM15/20.99 (25.03)

.55 (13.92)6.005 (152.53)

.100 (2.54) TYP. 12X

.150 (3.81)

.200 (5.08)

.250 (6.35)

11A22A33A44A55A66A7

1

2

3

4

5

6

7 8 9

.825 ( 20.98)

UM25/40 6.200 (157.48)

UM15/20 4.160 (105.66)UM15/20 4.700 (119.36)

UM8/12 3.175 (80.55)UM8/12 3.700 (93.98)

UM25/40 6.980 (176.78)


(0.64) SQ.

CABLE:DIA. 0.17536.00 (914.4)MIN. LENGTH

MOUNTING HOLES:2-56 UNC X .187 (4.74) DEEP

.125 (3.18) TYP. 13X.100 (2.54)1.800 (45.72)

1.800 (45.72)

1.100 (27.94)

1.14 (28.87) .55 (13.92)6.005 (152.53)

.200 (5.08) TYP. 6X

.150 (3.81)

.200 (5.08)

.250 (6.35)

.825 ( 20.98)

1

2

3

4

5

6

7

8 9

8 9

8 9

1.60 (40.64)

UM15/20UM8/12

UM8/12 UM15/20

UM8/12UM15/20

1.50 (38.10)

9 PIN - Legacy Interface







22

Spellmans V-Pak series are high performance 10W highvoltage power supplies offering a variable output voltageup to 10kV. These small modules achieve extreme rugged-ness and reliability with excellent long term stability withlow ripple and noise characteristics. Additionally, the V-Pak features a differential amplifier input for the voltageprogramming signal to improve immunity from externalsystem noise and addresses any offset issues. A fullyfeatured analog user interface is provided via a 9-pinD-type connector. Spellmans proprietary HV technologycoupled with SMT circuitry results in a small compact andlightweight module that is available in either a positive ornegative polarity output.

TYPICAL APPLICATIONSPhotomultiplier TubesElectrostaticsIon GunsSpectroscopyPrecision LensesElectron BeamElectrophoresisImage Intensifiers

SPECIFICATIONSInput:

+24VDC 0.5VDC

Input Current:1 Amp

Output Voltage:Up to 10kV

Output Polarity:Positive or Negative, specify at time of order

Output Power:10W

Voltage Regulation:Line: 0.001% of rated output voltage

over specified input voltageLoad: 0.001% of rated output voltage for full load change

ULTRA COMPACT FOOTPRINT DIFFERENTIAL INPUT FOR OUTPUT VOLTAGE PROGRAM 10 WATT OUTPUT POWER OUTPUT VOLTAGE CONTROL OUTPUT VOLTAGE AND CURRENT MONITOR HIGH STABILITY WITH ULTRA LOW RIPPLE AND NOISE 10V PRECISION REFERENCE SHUTDOWN MONITOR AND CONTROL 120% OUTPUT CURRENT LIMIT


Stability:0.01% per hour, 0.02% per 8 hours after1.0 hour warmup period

Precision Reference:+10V 1%, 10ppm C-1. Drift

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

TOP VIEW

Customer MountingHoles 4 x M3 x 5.3mmmax. depth

POT ADJSPELLMAN ONLY

2.28 [58]

1.28 [32.6]0.24 [6]

0.78 [20]

0.37 [9.5]

0.24 [6]0.24 [6]

1.89 [48]

2.28 [58]

2.75 [70]

2.75 [70]

0.27 [7]

PAGE 2 OF 2

V-PAK ANALOG INTERFACE9 PIN MALE D CONNECTOR

PIN SIGNAL SIGNAL PARAMETERS

1 Power Input Ground 0V2 Reference Output +10VDC3 Voltage Control Input + 0 to +10VDC with respect to pin 44 Voltage Control Input - 0 to -10VDC with respect to pin 35 Shutdown Bi-directional; input >5V forces shutdown

Output >5V indicates shutdown condition

6 Power Input + 24VDC7 Ground (signal) 0V8 Proportional I Monitor Output 0 to 10V 5%, Z=1k9 Proportional V Monitor Output 0 to 10V 5%, Z=1k

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONV-PAK 10W HIGH VOLTAGEPOWER SUPPLYV-PAK MODEL SELECTION TABLE

V-PAK Series Voltage Current Ripple (Vpp)VP1*10/24 0 to 1kV 10.00mA

OF 2

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NHIGH VOLTAGEMODULEMPS

DIFFERENTIAL INPUT FOR VOLTAGE PROGRAM OPTIONAL RS-232/RS-485 CONTROL 10 WATTS OUTPUT POWER VOLTAGE AND CURRENT MONITORS AND CONTROLS HIGH STABILITY ULTRA LOW RIPPLE AND NOISE CE MARKED AND UL61010A-1 CERTIFIED

Spellmans new MPS series are a family of high voltage10 Watt modules that provide output voltages rangingfrom 1kV to 20kV.

The MPS series are high performance productsdesigned with Spellmans hybrid topology of linear andswitch mode power conversion techniques deliveringlower noise with higher efficiency. The MPS seriesproduces excellent ripple and stability performancespecifications from a compact footprint. Additionallythe MPS series features, as standard, a differentialamplifier input for the voltage programming signal toimprove immunity from external system noise andaddressing any offset issues. Alternatively the outputvoltage may be pre-set by an internal potentiometer.

A fully featured remote user interface is provided via15-pin D-type connector as standard and an optionalRS-232 or RS-485 serial interface is also available.

Spellmans proprietary HV technology coupled withSMT circuitry results in an ultra compact and lightweightmodule that is available as either a positive or negativesupply that is ideal for OEM applications.

TYPICAL APPLICATIONSPhotomultiplier Tubes Electrostatic PrintingElectron and Ion Beams ScintillatorsElectronmultiplier Detectors Mass SpectrometryMicrochannel Plate Detectors Electrostatic LensesNuclear Instruments

OPTIONSVCC Variable Current ControlHS High StabilityDCC RS-232 or RS-485 ControlNote: It is not possible to supply the unit withboth full HS and DCC options


+24 Vdc, 2Vdc

Input Current:1 amp maximum

Output Voltage:8 models available from 1kV to 20kV


Power:10 watts, maximum

Voltage Regulation:Line: 0.001% of rated output voltage over specified

input voltageLoad: 0.001% of rated output voltage for full load change

Current Regulation (Vcc Option):Line: 0.01% for 1V input voltage change under

any load conditionsLoad: 0.01% for full load to short circuit


Stability:0.01% per hour, 0.02% per 8 hours after 1.0 hour warm up period.0.05% per 1000 hours after 1.0 hour warm up period (HS option)

Temperature Coefficient:25ppm per degree C10ppm per degree C (HS option)

Environmental:Temperature Range:

Operating: 0C to 50CStorage: -35C to 85C


Cooling:Convection cooled

Dimensions:1-10kV: 1.18 H X 2.75 W X 5.12 D (30mm x 70mm x 130mm)15-20kV: 1.18 H X 2.75 W X 6.49 D (30mm x 70mm x 165mm)

Weight:1-3kV: 9.88 oz. (280g)5-10kV: 14.82 oz. (420g)

15-20kV: 22.92 oz. (650g)

Interface Connector:15 pin male D connector

Output Connector:A captive 39.4 (1 meter) long shielded HV cable is provided

Regulatory Approvals:Compliant to 2004/108/EC, the EMC Directive and2006/95/EC, the Low Voltage Directive. UL/CULrecognized, File E227588.

www.spellmanhv.com/manuals/MPSwww.spellmanhv.com/MPS/faqwww.spellmanhv.com/MPS/dcc

Operators Manual

FAQs

Digital Interface




www.spellmanhv.com 128033-001 REV. HSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


25

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

2.75 [70]

M3 x 5DEEP MAX.3 PLS.

1.18 [30]

5.12 [130]

6.50 [165]

1.81 [46]

0.27 [7]

0.53 [13.6]

1.93 [49]

1.10 [28]

1-10kV

15-20kV

PAGE 2 OF 2

DIMENSIONS: in.[mm]

MPS ANALOG INTERFACE15 PIN D CONNECTOR (NON-DCC UNITS)

PIN SIGNAL SIGNAL PARAMETERS1 Power/Signal Ground Ground

2 +24Vdc Input +24Vdc @ 1 amp maximum

3 Voltage Monitor Output 0 to 10Vdc=0 to 100% Rated Output, Zout =10k

4 Local Programming Potentiometer connected to +10Vdc andPotentiometer Wiper Output Ground, 0 to 10Vdc adjustable wiper output

provided

5 Voltage Program Input 0 to 10Vdc=0 to 100% Rated Output, Zin=10M

6 Voltage Program Differential 0 to 10Vdc=0 to 100% Rated Output, Zout =10kAmplifier Output

7 Voltage Program Differential 0 to 10Vdc differential between pin 7 andAmplifier InputPositive pin 9 = 0 to 100% of rated output,

diode clamped to ground, Zin =38k

8 Current Monitor Output 0 to 10Vdc = 0 to 100% Rated Output, Zout =10k

9 Voltage Program Differential 0 to 10Vdc differential between pin 7 andAmplifier InputNegative pin 9 = 0 to 100% of Rated Output,


10 No Connection No Connection

11 Current Program Input Standard: Internally connected to provide110% fixed current limitVCC Option: 0 to 10Vdc=0 to 100% RatedOutput, Zin=1M

12 Enable Input Low = Enable, TTL, CMOS, OpenCollector Compliant

13 Internal Connection No Connection14 Vref (/HS unit only) +10V ultra high stability reference output.

On standard units the reference voltage isavailable on pin 4

15 Analog Signal Ground Analog Signal Ground (No connection for(15kV to 20kV units) (1kV to 10kV units)

*Specify P for positive polarity or N for negative polarity.Custom units available.

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NHIGH VOLTAGEMODULEMPS

MPS SELECTION TABLEModel Output Voltage Output Current Ripple (Vpp)MPS1*10/24 1kV 10mA

The MP Series has been designed as high performancedc to dc converters with output voltages up to 40kV.

Each module provides well regulated, low ripple andhigh stability high voltage in a highly versatile compactdesign, combining linear and switched mode techniquesto minimize internal dissipation and generated EMI/RFIinterference. The higher voltage modules are vacuumencapsulated to ensure corona free operation.

Specialist cell manufacture of the MP Series ensuresprompt delivery.

TYPICAL APPLICATIONSPhotomultiplier TubesScintillatorsElectron GunsIon GunsNuclear InstrumentsElectrostatic lensesSpectroscopyMicrochannel Plates

OPTIONSF Flange MountingP Positive Output PolarityN Negative Output PolarityLL Optional Lead Length


+24Vdc2V. Other input voltages available on special order.Input Current:

Less than 1A at full output.Output Voltage:

Continuously adjustable over entire output range. Availablein either positive or negative output polarity. See table forvoltage ranges.

ARC AND SHORT-CIRCUIT PROTECTION LOW OUTPUT RIPPLE - 0.001% P-P LOCAL AND REMOTE VOLTAGE PROGRAMMING 10V REFERENCE OUTPUT FOR EXTERNAL CONTROL HIGH STABILITY 0.001% LINE AND LOAD REGULATION MODELS UP TO 40KV OUTPUT CE MARK FOR EMC DIRECTIVE OEM CUSTOMIZATION AVAILABLE

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONMP 10W HIGH STABILITYPOWER SUPPLY PAGE 1 OF 2

Output Voltage Control: Controlled by either:1) Internal ten-turn potentiometer2) External potentiometer 5k to 100k (set internal pot. to max.)3) Remote differential voltage programming

(0 to +10V gives 0 to full output).Accuracy 0.1%.

Remote Control:Remote programming Common Mode Range: -5VDC to +15VDC

Line Regulation:0.001% for input change of 1V.

Load Regulation:0.001% for 100A to full load change(at maximum voltage).

Temperature Coefficient:Better than 25ppm/C.

Stability:

MP SELECTION TABLEOUTPUT MAX. RIPPLE MODELVOLTAGE CURRENT (full load)kV mA mV0 to 1 10 10mV p-p MP1*

0 to 1.5 6 10mV p-p MP1.5*

0 to 2 5 10mV p-p MP2*

0 to 2.5 4 10mV p-p MP2.5*

0 to 3 3 10mV p-p MP3*

0 to 5 2 20mV p-p MP5*

0 to 10 1 100mV p-p MP10*

0 to 15 0.60 150mV p-p MP15*

0 to 20 0.50 200mV p-p MP20*

0 to 30 0.33 300mV p-p MP30*

0 to 40 0.2 400mV p-p MP40*

MP CONNECTOR 10 PIN

TB1 SIGNAL TB1 SIGNAL1 Synchronization 6 Remote Control2 +24V Input 7 Vprog+3 Voltage Monitor 8 Current Monitor4 Local Control 9 Vprog-5 Remote / Local Link 10 Power Ground

SPELLMANHIGH VOLTAGE ELECTRONICS CORP.Plain view, NY 11803 MADE IN USA

PART NO:MODEL:

SERIAL NO.OUTPUT:INPUT:

D3.19[81]

3.86 [98]1.65[42]

0.28[7] 2.76 [70]

0.55[14]

SPELLMANHIGH VOLTAGE ELECTRONICS CORP.Plain view, NY 11803 MADE IN USA

PART NO:MODEL:

SERIAL NO.OUTPUT:INPUT:

FLANGE MOUNTING (optional)

D

FixingCenters

0.43[11] 0.24[6]

2.09[53]

2.99 [76]

SIDE VIEW BOTTOM VIEW

STUD MOUNTING (standard)SIDE VIEW BOTTOM VIEWTOP VIEW

TOP VIEW

*Specify P for positive polarity or N for negative polarity.

DIMENSIONS: in.[mm]

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONMP 10W HIGH STABILITYPOWER SUPPLY PAGE 2 OF 2Flange case

MP1 to MP5: 1.65H x 3.86W x 6.61 (42mm x 98mm x 168mm)Fixing center: 6.14 (156mm)



MP40: 1.81H x 3.86W x 13.0 (46mm x 98mm x 330mm)Fixing center: 12.5 (318mm) (4 x 3.3mm mounting holes)

Weight:MP1 to MP5: 21.18 oz. (600g)MP10 to MP15: 35.3 oz. (1000g)MP20 to MP30: 51.18 oz. (1450g)MP40: 76.24 oz. (2160g)





www.spellmanhv.com 128005-001 REV. GSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


OF 2

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O N

Spellmans Bertan brand of 230 Series high voltage powersupplies provide regulated high voltage outputs from 1 to30kV. The low noise, linear topology employed results inextremely low output ripple specifications. These 12 to 15watt units are inherently reversible by design, providingeither positive or negative output polarity. The 230 Series isfully arc and short circuit protected. Excellent regulationspecifications are featured along with outstanding stabilityperformance.

TYPICAL APPLICATIONSHiPot TestingElectrostaticsGeneral Laboratory Usage

OPTIONSF Isolated (Floating) Output


115Vac, 10%, 50/60 Hertz @ 0.5 amp230Vac, 10%, 50/60 Hertz @ 0.25 ampsInput voltage is switch selectable

Output Voltage:See model selection table

Output Polarity:All units are reversible polarity by design

Output Current:See model selection table


input voltage rangeLoad:0.005% of rated output voltage for a full load

change

Current Regulation:Internally set to limit at less than 125% of rated current.A rear panel switch allows limiting at 25% of rated full current.



Stability:0.01%/hour, 0.02% per 8 hours after a 1/2 hour warm up

Accuracy:Front panel control: (0.2% of setting + 0.2% of maximum)Front panel Meter: Voltage (0.5% of setting + 0.5% of

maximum), Current (2% of setting + 0.5% of maximum)Remote Programming: (0.1% of setting + 0.1% of maximum)Voltage Monitor: (0.1% of reading + 0.1% of maximum)Current Monitor: (2% of reading + 1% of maximum)

Front Panel Metering and Controls:Power ON/OFF switch3.5 digit metering for voltage and current, switch selectablePolarity indicator10 turn locking potentiometer to set output voltageHV output connectorGround stud

Operating Temperature0C to +50C



Input Line Connector:IEC320 EMI filter/input connector, a detachableline cord is provided

Interface Connector:9 pin D connector, a mating connector is provided

Output Connector:A detachable 10 foot (3 meter) HV cable is providedfor units up to 5kV; 10kV through 20kV: 59 (1.5 meter);30kV: 10 foot (3 meter)


Dimensions7.63 W X 5.03 H X 8.91 D(194mm X 128mm X 226mm)

Weight:10 pounds (4.5kg)


230 HIGH VOLTAGEPOWER SUPPLY MODULAR BENCH TOP DESIGN LOW RIPPLE AND NOISE 3.5 DIGIT FRONT PANEL DIGITAL METERING REVERSIBLE OUTPUT POLARITY

www.spellmanhv.com/manuals/230






29

FRONT VIEW

BACK VIEW

SIDE VIEW

HV CONN

POS NEG

METER

OFF

POWERON

PCS

VF S

GROUND

HIGH VOLTAGEADJUST

7.63 194]

5,03 [128]

1.0 [25]

.66 [17]

8.50 [216]

8.25 [210]

PAGE 2 OF 2

MODEL SELECTION TABLE230 Voltage Current RippleSeries230-01R 0 to 1kV 0 to 15mA 10mV230-03R 0 to 3kV 0 to 5mA 30mV230-05R 0 to 5kV 0 to 3mA 50mV230-10R 0 to 10kV 0 to 1.5mA 500mV230-20R 0 to 20kV 0 to 0.5mA 2 volts230-30R 0 to 30kV 0 to 0.4mA 5 volts

INTERFACE CONNECTORPIN SIGNAL PARAMETERS

1 Voltage Monitor 0 to 5Vdc = 0 to 100% rated voltage, Zout = 10K2 n/c none3 Enable TTL 0 disables HV, TTL 1 or open enables HV4 +5Vdc Reference +5.0Vdc @ 10mA, maximum5 Current Monitor 0 to 5Vdc = 0 to 100% rated current, Zout = 10K6 Voltage Program Input 0 to 5Vdc = 0 to 100% rated voltage, Zin = 1M7 Analog Ground Ground8 Digital Ground Ground9 Polarity Indicator Open collector, 30V @ 25mA, positive = ON

DIMENSIONS: in.[mm]

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O N230 HIGH VOLTAGEPOWER SUPPLY

OPTIONS:Isolated (Floating) Output-Option FUnits up to and including 5kV can be provided with differential outputscapable of floating up to 2kV from ground. Voltage programming andmonitoring functions are normally referenced to ground. Current monitor-ing and metering is eliminated. Replace R suffix with F for thisoption. Output connectors (positive, negative and ground) for 1kV and3kV models are 3-way binding posts; 5kV model uses Spellman P/NJAC for positive and negative outputs with 3-way binding post forground. Mating connectors are Spellman P/N PA (MHV type 1705-14)






OF 2

DIFFERENTIAL INPUT FOR VOLTAGE PROGRAM 20 WATTS OUTPUT POWER VOLTAGE AND CURRENT CONTROLS VOLTAGE AND CURRENT MONITORS HIGH STABILITY ULTRA LOW RIPPLE AND NOISE HIGH VOLTAGE ENABLE CONTROL

Spellmans new MPS20W series are a family of highvoltage 20 Watt modules that provide output voltagesranging from 1kV to 10kV.

The MPS20W series are high performance productsdesigned with Spellmans hybrid topology of linear andswitch mode power conversion techniques deliveringlower noise with higher efficiency. The MPS20W seriesproduces excellent ripple and stability performancespecifications from a compact footprint. Additionally theMPS20W series features, as standard, a differential ampli-fier input for the voltage programming signal to improveimmunity from external system noise and addressing anyoffset issues. Alternatively the output voltage may be pre-setby an internal potentiometer. A fully featured remote userinterface is provided via 15-pin D-type connector as stan-dard. The output voltage is arc and short circuit protectedand the power input has a current limiter fitted.

Spellmans proprietary HV technology coupled withSMT circuitry results in an ultra compact and lightweightmodule that is available as either a positive or negativesupply that is ideal for OEM applications.

TYPICAL APPLICATIONSPhotomultiplier TubesMicrochannel Plate DetectorsScintillatorsMass SpectrometryElectron and Ion BeamsElectrostatic LensesNuclear InstrumentsElectrostatic Printing

OPTIONSVCC Variable Current Control


+24 Vdc, 2Vdc

Input Current:1.5 amps

Output Voltage:5 models available from 1kV to 10kV


Power:20 watts


input voltageLoad: 0.001% of rated output voltage for full load change

Current Regulation (Vcc Option):Line: 0.01% for 1V input voltage change under

any load conditionsLoad: 0.001% for 0 to full load


Stability:0.01% per hour, 0.02% per 8 hours after1.0 hour warm up period.

Temperature Coefficient:25ppm per degree C

Environmental:Temperature Range:

Operating: 0C to 50CStorage: -35C to 85C



Dimensions:1.31 H X 3.74 W X 5.91 D (33.5mm x 95mm x 150mm)

Weight:1-2kV: 15.17 oz. (430g)3-10kV: 25.76 oz. (730g)

Interface Connector:15 pin male D connector

Output Connector:A captive 39.4 (1 meter) long shielded HV cable is provided


SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATIONHIGH VOLTAGEMODULEMPS20W




www.spellmanhv.com 128064-001 REV. CSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


www.spellmanhv.com/manuals/MPS20W

31

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

M3 x 5DEEP MAX.3 PLS.

1.32 [33.5 ]

1.89 [48]

0.31 [8]

0.47 [12]

1.81 [46]

2.71 [69]

5.91 [150]

3.74 [95]

PAGE 2 OF 2

DIMENSIONS: in.[mm]

MPS20W ANALOG INTERFACE15 PIN D CONNECTOR

PIN SIGNAL SIGNAL PARAMETERS1 Power/Signal Ground Ground

2 +24Vdc Input +24Vdc @ 1.5 amp maximum

3 Voltage Monitor Output 0 to 10Vdc=0 to 100% Rated Output, Zout =2.2k

4 Local Programming Potentiometer connected to +10Vdc andPotentiometer Wiper Output Ground, 0 to 10Vdc adjustable wiper output

provided

5 Voltage Program Input 0 to 10Vdc=0 to 100% Rated Output, Zin=10M

6 Voltage Program Differential 0 to 10Vdc=0 to 100% Rated Output, Zout =2.2kAmplifier Output

7 Voltage Program Differential 0 to 10Vdc differential between pin 7 andAmplifier InputPositive pin 9 = 0 to 100% of rated output,


8 Current Monitor Output 0 to 10Vdc = 0 to 100% Rated Output, Zout =2.2k

9 Voltage Program Differential 0 to 10Vdc differential between pin 7 andAmplifier InputNegative pin 9 = 0 to 100% of Rated Output,


10 No Connection No Connection

11 Current Program Input Standard: Internally connected to provide110% fixed current limitVCC Option: 0 to 10Vdc=0 to 100% RatedOutput, Zin=1M

12 Enable Input Low = Enable, TTL, CMOS, OpenCollector Compliant

13 Internal Connection No Connection14 No Connection No Connection15 Analog Signal Ground Analog Signal Ground

*Specify P for positive polarity or N for negative polarity.Custom units available.

MPS20W SELECTION TABLEModel Output Voltage Output Current Ripple (Vpp)MPS1*20/24 0-1kV 20mA

The EPM Series of power supplies utilize proprietarycircuitry which yields full output current from near zero tomaximum output voltage. Current regulation is standardon all models and is particularly valuable in applicationsthat require a current source into the load.

TYPICAL APPLICATIONSElectrophoresis PhotomultipliersElectron Beam Laboratory ApplicationsIon Source

SPECIFICATIONSInput:

+24Vdc 10%

Output:8 models from 1kV to 30kV. Each model is available inpositive or negative polarity outputs.

Voltage Regulation:Load:

Static: 0.02% of output voltage for a full load change.Dynamic: 10V/100A.

Line: 0.01% for 10% change in input voltage.

Current Regulation:Load: 0.01% of output current from 0 to rated voltage.Line: 0.01% of rated current over specified input range.

Ripple:0.1% p-p of output voltage.

Dimensions:2H x 5.7W x 5.7D (5.1cm x 14.5cm x 14.5cm)

Input Connector:9 pin AMP Metri-Mate. Mating connector and pins supplied.

Output Cable:18 1 (45.7cm) of UL listed high voltage wire.

Voltage Stability:0.02% per 8 hours (after 1/2 hour warm-up).

Voltage Temperature Coefficient:0.01% per C.

Voltage Test Point:10V2% = Max. rated output.

Current Test Point:10V2% = Max. rated output.

Remote Enable:>3.4V= HV ON.




www.spellmanhv.com 128069-001 REV. DSpellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company


PAGE 1 OF 3

The V6 Series is a family of regulated, fixed outputpolarity modular high voltage power supplies whichprovide exceptional performance and value in manyapplications.

The V6 Series units are fully enclosed and designedfor system or bench top operation. A wide range ofoutput voltages, up to 30kV is available.

The output voltage is controlled locally by an internalmulti-turn potentiometer. Remote analog voltage or resis-tance programming capability is included in all models.Analog monitor outputs are also included for remotemonitoring of both the high voltage and current outputs.

TYPICAL APPLICATIONSSpectrometersCRT TestingDetectorsE Beam SystemsGeneral Laboratory Usage

OPTIONSRS RS-232 Interface


AC Model: 100-240Vac, 10%; 50/60 Hertz; 1 ampDC Model: 24Vdc 10%, 2 Amps

Voltage Regulation:Line: 0.001% of maximum 90-240Vac input line change

0.001% of maximum 10%Vdc input line change

Load: 0.002% of maximum for 0 to maximum ratedoutput current change

Current Regulation:Line: 0.05% of maximum current for 90-240Vac

input line change0.05% of maximum current for 10% Vdc input change

Load: 0.1%% of maximum current for 0 to maximum ratedoutput voltage change



Stability:0.01%/hour, 0.02% per 8 hours after a 1/2 hour warm up

Operating Temperature:0C to +50C


Humidity:20% to 85%RH, non-condensing

Local Control:Internal multi-turn potentiometer for 0 to maximum outputvoltage (0.2%)

Remote Programming:0 to +5Vdc analog input signal proportional to 0 to maxi-mum rated output. Accuracy is (0.1% of setting +0.1%of maximum). The programming input impedance is20 megohms.

Voltage Monitor:0 to +5V proportional to 0 to maximum output voltage.Accuracy is (0.1% of reading +0.1% of maximum).The monitor impedance is 10 kilohms.

Current Monitor:0 to +5V proportional to 0 to maximum output voltage.Accuracy is (2.0% of reading +1.0% of maximum).The monitor impedance is 10 kilohms.

Enable:Remote interlock enables (low) disables internally (high)the high voltage output. Signal is normally high and supplywill default to a disabled condition.

Current Limit:All units provide short circuit current limiting to less than110% of the maximum rated output current. Supply is selfrestoring upon removal of cause limit condition.

Arc/Short Circuit:Short circuit and arc protected; self restoring.


COMPACT MODELS UP TO 30KV HIGH STABILITY LOW RIPPLE AND NOISE LOCAL AND REMOTE PROGRAMMING VOLTAGE AND CURRENT MONITORING ARC AND SHORT CIRCUIT PROTECTED OEM CUSTOMIZATION AVAILABLE RoHS COMPLIANT

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NAC & DC HIGHVOLTAGE MODULES

V6-DCV6-AC

V6

www.spellmanhv.com/manuals/V6

34

OF 3

V6A MODEL SELECTION TABLEV6 AC Series Voltage Current RippleV6A1*30 0 to 1kV 0 to 30mA 15mVV6A1.5*30 0 to 1.5kV 0 to 20mA 15mVV6A3*30 0 to 3kV 0 to 10mA 30mVV6A5*30 0 to 5kV 0 to 6mA 50mVV6A10*30 0 to 10kV 0 to 3mA 200mVV6A15*30 0 to 15kV 0 to 2mA 450mVV6A20*30 0 to 20kV 0 to 1.5mA 800mVV6A30*30 0 to 30kV 0 to 1mA 1.8 volts

*Specify P for positive polarity or N for negative polartity

S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R AT I O NV6 AC & DC HIGHVOLTAGE MODULESV6A ANALOG/DIGITAL INTERFACEJ1 15 PIN FEMALE D CONNECTOR


1 Local Voltage Program Multi-turn front panel potentiometer2 TX Out (optional) RS232 Receive Data3 RX In (optional) RS232 Transmit Data4 Voltage Program Input 0 to 5V=0 to 100% Rated Output, Zin=20M5 Signal Ground RS232 Ground (optional)6 Signal Ground Ground7 +5V Reference Out +5V @ 1mA Max.8 HV Enable Input Active Low to Enable the HV9 Current Program Input 0 to 5V=0 to 100% Rated Output, Zin=20M

10 Current Monitor 0 to 5V=0 to 100% Rated Output, Zout=10k11 Voltage Monitor 0 to 5V=0 to 100% Rated Output, Zout=10k12 HV Enable Output Active Low HV is Enabled13 Signal Ground Ground14 N/C No Connection15 N/C No Connection

V6D MODEL SELECTION TABLEV6 DC Series Voltage Current RippleV6D1*30 0 to 1kV 0 to 30mA 15mVV6D1.5*30 0 to 1.5kV 0 to 20mA 15mVV6D3*30 0 to 3kV 0 to 10mA 30mVV6D5*30 0 to 5kV 0 to 6mA 50mVV6D10*30 0 to 10kV 0 to 3mA 200mVV6D15*30 0 to 15kV 0 to 2mA 450mVV6D20*30 0 to 20kV 0 to 1.5mA 800mVV6D30*30 0 to 30kV 0 to 1mA 1.8 volts

*Specify P for positive polarity or N for negative polartity

V6D ANALOG/DIGITAL INTERFACEJ1 15 PIN FEMALE D CONNECTOR


1 Local Voltage Program Multi-turn front panel potentiometer2 TX Out (optional) RS232 Receive Data3 RX In (optional) RS232 Transmit Dat

spellman

Documents