7/23/2019 SPL-110 (1109)

1/2

ASTM A 74

>>Brass and Cast Iron Plugs

Possession of this price list shall not be construed as an offer to sell the products listed.

Charlotte Pipe and "You can't beat the system" are registered trademarks of Charlotte Pipe and Foundry Company.

1901-2010 Charlotte Pipe and Foundry Company.

List Price Schedule SPL-110Effective January 1, 2010

(Revised November 5, 2009)

Supersedes Price Schedule SPL-109Plugs

PO BOX 35430 CHARLOTTE, NORTH CAROLINA 28235

SALES PHONE (704) 348 6450 (800) 572 4199

TECHNICAL PHONE (800) 438 6091 FAX (800) 553 1605LITERATURE BY FAX (800) 745 9382 WWW.CHARLOTTEPIPE.COM

UPC# Pieces Pieces List PriceSize 611942- Full Crate Half Crate Weight Each

UPC# Pieces Pieces List PriceSize 611942- Full Crate Half Crate Weight Each

LP-SPL-110

Part No. PLG 410Ohio Code Brass Plug

2 00697 0.5 $25.50

212 00698 0.5 31.10

3 00699 0.8 39.80

312 00700 1.1 49.70

4 00701 1.2 56.50

5 00702 1.6 88.50

6 00703 2.4 157.80

8 00704 4.0 276.70

10 00705 10.7 803.70

Part No. PLG 430

Southern Code Brass Plug

112 00714 0.2 $14.40

2 00715 0.3 14.40

212 00716 0.4 20.40

3 00717 0.5 22.50

312 00718 0.7 31.90

4 00719 0.9 37.10

5 00720 1.2 64.10

6 00721 2.2 133.50

8 00722 3.5 185.90

Part No. PLG 440Southern Code Countersunk Brass Plug

112 00723 0.2 $15.60

2 00724 0.3 20.10

3 00726 0.6 26.90

312 00727 0.7 31.90

4 00728 0.9 42.60

5 00729 1.3 71.10

6 00730 2.2 125.30

Part No. PLG 450Cast Iron Plug

6 00735 4.2 $93.40

10 00737 9.0 147.90

Charlotte Pipeproducts are manufactured to the applicable

ASTM standard. Charlotte Pipe and Foundry cannot accept

responsibility for the performance, dimensional accuracy, or

compatibility of pipe, fittings, plugs, gaskets, or couplings not

manufactured or sold by Charlotte Pipe and Foundry.

Weights are approximate and for shipping purposes only.

[Please see Service price sheet SV-110 for closet bends and closet flanges.]

7/23/2019 SPL-110 (1109)

2/2

LIST PRICE SCHEDULE SPL-110(Revised November 5, 2009)

PO BOX 35430 CHARLOTTE, NORTH CAROLINA 28235

SALES PHONE (704) 348 6450 (800) 572 4199

TECHNICAL PHONE (800) 438 6091 FAX (800) 553 1605LITERATURE BY FAX (800) 745 9382 WWW.CHARLOTTEPIPE.COM

All Charl otte Pipe and Foundr y Co mpany Productsare made in U.S.A.

Universal Product Code Numbers are recognized

worldwide as the preferred means of product identification for

electronic data interchange. Each number uniquely identifies

a part.

The 11 digit Universal Product Code numbering

system uses the first 6 digits to identify Charlotte Pipe as the

manufacturer, and the last 5 digits to identify an individual

part or product:

611942 00000

(Charlotte Pipe) (Product)Only the last 5 digits of the Universal Product Code

number are needed to order a product by mail, phone, or fax.

The entire Universal Product Code number is needed for use

with EDI.

UNIVERSAL PRODUCT CODE NUMBERS

Charlotte Pipe and Foundry Company(Charlotte Pipe) Products are

warranted to be free from manufacturing defects and to conform to

currently applicable ASTM standards for a period of five years from

date of delivery. Buyers remedy for breach of this warranty is limited

to replacement of, or credit for, the defective product. This warranty

excludes any expense for removal or reinstallation of any defectiveproduct and any other incidental, consequential, or punitive damages.

This limited warranty is the only warranty made by seller and is

expressly in lieu of all other warranties, express and implied,

including any warranties of merchantability and fitness for a

particular purpose. No statement, conduct or description by Charlotte

Pipe or its representative, in addition to or beyond this Limited

Warranty, shall constitute a warranty. This Limited Warranty may

only be modified in writing signed by an officer of Charlotte Pipe.

This Limited Warranty will not apply if:

1) The Products are used for purposes other than their intended

purpose as defined by local plumbing and building codes, andthe applicable ASTM standard.

2) The Products are not installed in good and workmanlike

manner consistent with normal industry standards; installed in

compliance with the latest instructions published by Charlotte

Pipe and good plumbing practices; and installed in conformance

with all local plumbing, fire and building code requirements.

3) This limited warranty does not apply when the products of

Charlotte Pipe are used with the products of other manufacturers

that do not meet the ASTM standard or that are not marked in

a manner to indicate the entity that manufactured them.

LIMITED WARRANTY

4) The Products fail due to defects or deficiencies in design,

engineering, or installation of the piping system of which they

are a part.

5) The Products have been the subject of modification; misuse;

misapplication; improper maintenance or repair; damage causedby the fault or negligence of anyone other than Charlotte Pipe;

or any other act or event beyond the control of Charlotte Pipe.

6) The Products fail due to the freezing of water in the Products.

7) The Products fail due to contact with chemical agents, fire

stopping materials, thread sealant, plasticized vinyl products,

or other aggressive chemical agents that are not compatible.

8) Pipe outlets, sound attenuation systems or other devices are

permanently attached to the surface of CharlottePVC, ABS

or CPVC products with solvent cement or adhesive glue.

Any product manufactured by Charlotte Pipe proved to be defectivein manufacture will be replaced F.O.B. point of original delivery, or

credit issued, at the discretion of Charlotte Pipe. Purchaser must

obtain written permission and/or a return goods authorization

and instructions for return shipment to Charlotte Pipe of any product

claimed defective, shipped in error or excess of inventory needs.

All Charlotte Pipe products alleged to be defective must be made

available to Charlotte Pipe at the following address for verification,

inspection and determination of cause:

Charlotte Pipe and Foundry Company

Attention: Warranty Department

2109 Randolph Road

Charlotte, North Carolina 28207

10/16/09

Charlotte, Charlotte Pipe and "You can't beat the system" are registered trademarks of Charlotte Pipe and Foundry Company.