spotforge wifi & ethernet settings
DESCRIPTION
VESTA BOX NETWORK SETTINGSTRANSCRIPT
Android Digital Signage
VESTA BOX
Wifi & Ethernet Settings
Note: If time doesn't get update in Vesta Player once internet in connected check for firewall. UDP 123 port must be enabled.
A) Wifi Setting -‐ Steps 1) Conenct USB key board and mouse. 2) Press windows Key in key board for 4 times to minimize Vestamediaplayer App , Vesta clock,
Vesta Ticker, Vesta Live status App and click Settings icon .
3) Using mouse swith on the Wifi mode as shown in the below picture.
4) Available Wi-‐Fi network will be listed as shown.
5) Select the preferred Network connection as shown.
6) Text Wi-‐Fi password in the text box as shown.
7) To verify the connection browse for www.google.com in Default android browser.
B) For Ethernet Connection -‐ Steps Turn off Wi-‐Fi before you turn on Ethernet. Click menu ‘More’ . Under the menu “More” Ethernet configuration will be there.
Turn On Ethernet. Click Ethernet configuration .
If your internet setup in DHCP enabled. Just check DHCP and click save. If your internet setup is not in DHCP enabled then click Static IP and provide IP, subnet mask, DNSdetails and save it finally.
Then to check the connection browse for google.com using the default android browser. If it
connects google.com means connection is successful.