srsuntour 25th anniversary company profile

1Since 1988

since 1988

2 SRSUNTOUR Company Profile 2013

“We contribute bicycle parts wholeheartedly and with pride to society.“

本公司以最誠摯的心及自信「經由製

造及銷售高附加價值的自行車零組

件、對社會做出奉獻。」

私たちは、心をこめて、誇りを持って、「自転車部品の製造、販売を通して社会に貢献します。」

3Since 1988

目錄 index

敬致各位先進本公司現況歷史沿革工廠介紹

生產工廠與營業據點技術

商品開發生產革新品質環境

產品競技場上之測試WERX實績願景展望

05060812151618202224262830

greetingcompany in numbers historyfactories | divisionsglobal expansiontechnologyresearch & developmentinnovative productionquality controlenvironmentfield test by werxachievementsfuture prospects


new factory in Kunshan, china, opened in 2012

5Since 1988

敬致各位先進

ごあいさつ

当社は、１９８８年創業以来、『ものづくり』の集団として、お客様のニーズやご期待に応えるべく、品質、製品開発の向上に取り組んでまいりました。２００１年に中国の深圳工場、２００4年に昆山工場を設立し、2012年に昆山第２工場を設立しました。これもひとえにお客様を始め、お取引先の皆様方のご愛顧とご支援の賜物と従業員一同、感謝いたしております。　そして２５周年という節目を機会に、これまで培ってきたことを更に進化発展させ、価値ある事業を創造し、皆様のご期待に添えるよう従業員一同、心を新たにして、今まで以上に一層の努力を重ねる所存でございます。今後とも皆様のご理解とご指導を賜りますようお願い申し上げます。

代表取締役社長小林　大裕

致各位先進

本公司自1988年成立以來、即以「專業產品製造」為集團使命、整合客戶之需求及期望、並致力於品質及產品開發能力之提升。本公司於2001年設立深圳工廠、於2004年設立昆山工廠、並於2012年設立昆山第2工廠。這全都是承蒙所有客戶及先進給予的支持與愛護,所創造出來的成果、在此代表本公司全體員工謹致萬分謝意。在迎接本公司25周年廠慶之際,本公司將更進一步發展現有的實力、創造更具價值之企業,榮輪全體員工將加倍努力以不負各位的期望。今後更希望各位先進能夠多加給予指教與協助。

董事長小林大裕

GreetinG

since the very inception in 1988 when we started out as a group of “passionate manufacturing people”, we have been constantly striving to meet the needs and expectations of our customers. as it was in the past and will be in the future, we are committed to ongoing improvements and pushing forward through innovations. we established a factory in shenzhen, china, in 2001 and an additional factory in Kunshan, china, in 2004. most recently we built a second plant in Kunshan in 2012. We firmly believe all this would have been impossible without the loyalty of our customers, the commitment of our employees, the support and patronage of our suppliers, and the dedication of everyone involved with our company. we are most deeply grateful.in the light of our 25th anniversary we also feel it right and proper to take a look back over our achievements accumulated over the years. drawing on our expertise and know-how provides us with the courage and drive to make the next leap forward.i would kindly like to ask everyone for their understanding and guidance in the future.

president & ceodaisuke Kobayashi

GreetinG


工廠: 3 員工人數: 1.600 2012年避震前叉之銷售數量為1,000萬支集團整體銷售額為新台幣60億元 3 factories 1.600 employees 10.000.000 forks produced in 2012 207.000.000 Usd$ annual turnover

7Since 1988

本公司現況 company in nUmbers

3 factories 1.600 employees 10.000.000 forks produced in 2012 207.000.000 Usd$ annual turnover


歷史沿革

1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003

1987

SR Suntour was established by the Sakae Ringyo Company with a capital investment of 45,000,000 NT$ in Tokyo, Japan.

1988

Established a factory and office with an area of 11,000㎡ at 7, Hsingyeh Road, Fu Hsing Industrial Zone, Changhua, Taiwan, and began manufacturing mid- to high-end aluminum bicycle components.

1991

European office set up in Belgium.

1995

Started producing suspension forks for mountain bikes.

1997

1. Awarded ISO-9001 certificate.2. Installed an automated link-motion press machine (500-ton)3. Started producing magnesium mountain bike forks.

1998

Installation of in-house 500-ton magnesium alloy melt-forging machine for the production of magnesium MTB suspension forks, and began research and development of similar industrial products.

2000

Awarded ISO-14001 certificate.

1987年

本公司創立、實收資本額新台幣4,500萬元整、由日本國東京都足立區之榮輪業株式會社出資設立。

1988年

於台灣省彰化縣福興工業區興業路七號建設工廠及事務所、廠區面積11,000平方公尺(3,300坪)、開始生產鋁合金鑄造之中高級自行車零組件。

1991年

設立歐洲比利時事務所。

1995年

開始生產自行車用避震前叉「MTB」。

1997年

1.取得ISO9001認證。2.導入直柱型連桿式自動沖床(500噸級)。3.開始組立生產鎂合金材質MTB避震前叉。

1998年

導入鎂合金鑄造機(500噸級)、廠內開始自行生產鎂合金材質之MTB避震前叉、並研究開發他種相關行業產品。

2000年

通過ISO-14001取得認證。

history

9Since 1988

歷史沿革 history

1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003

2001

1. New factory at Shenzhen, China formally begins production2. Company profit capital investment reaches 457,380,000 NT$.

2002

1. In the context of a governmental cooperation project Taiwan based bicycle suppliers launched the „A-TEAM“ to promote their activities. SRSUNTOUR was elected as one of the founding members and started with the „TPS“ method.2. Developed its first lock out system for suspension forks and started mass production.

2003

1. Promotion of 5S activities.2. First „A-TEAM“ exhibition and congress carried out within SRSUNTOUR.

2004

1. Factory in Kunshan mainland China was established, starting with the production of transmission and drivetrain products.2. Production start of the transmission system called „ICE“.3. In all three factories in Taiwan, Shenzhen and Kunshan the ERP system „TIPTOP“ was introduced.

2005

1. Introduction of the „TOYO“ 500 tons magnesium die-casting machine.2. Started the development of the V-BOXX internal gearbox transmission.3. Coming from „A-TEAM“ TPS method SRSUNTOUR additionally started the „TQM“ system.

2006

1. Two „MAZAK“ CNC tapping centers and another „TOYO“ 650 ton magnesium die-casting machine introduced.

2001年

1.大陸深圳新廠正式開工生產。2.盈餘轉增資資本額為新台幣457,380仟元整。

2002年

1.在台灣自行車業界的主要領導者及政府機關之合作推動下、成立了「A-TEAM」之組織、公司被選為創始會員之成員、並由此開始推行「TPS」活動。2.開發出具有鎖死功能之避震前叉、並開始量產。

2003年

1.全廠推動5S活動。2.舉辦「A-TEAM」之第一次臨廠公開發表會。

2004年

1.設立大陸昆山工廠、並於該廠開始生產變速器。2.開始生產「ICE」之變速系統產品。3.於台灣、深圳、昆山三處生產基地、導入新ERP系統「TIPTOP」。

2005年

1.購入「TOYO」品牌的500噸級鎂合金壓鑄機1台。2.開始開發新世代內變速系統V-BOXX。3.持續進行「A-TEAM」TPS活動、接著展開「TQM」活動。

2006年

1.購入「MAZAK」之CNC複合加工機2台及「TOYO」650噸級鎂合金壓鑄機1台。2.內變速系統V-BOXX榮獲EURO BIKE展創新產品大賽之銀牌獎。3.深圳工廠之粉體塗裝線設立完成。


2004 2005 2006 2007 2008 2009 2010 2011 2012 2013

2007年

1.台灣廠新廠房落成啟用(樓高4層、總使用面積約4,000㎡)。2.導入鋁製前叉管加工線。3.開始量產銷售內變速系統V-BOXX。4.深圳工廠再購入「TOSHIBA」350噸級鋁合金壓鑄機4台。5.集團營業額達新台幣40億元整。

2008年

1.董事長小林先生及A-TEAM成員一同完成自行車環台一周之壯舉。

2.開發電子式電動鎖死系統、並開始量產銷售AXON-ELD。3.開發車軸固定系統Q-LOC、並開始銷售搭載車軸固定系統Q-LOC的避震前叉。4.於9月購入「AIDA」650噸級自動沖壓機1台。5.深圳工廠購入「TOSHIBA」350噸級與500噸級之鋁合金壓鑄機共3台。

2009年

1.昆山工廠開始開發電動輔助系統。2.開發搖臂式避震前叉、並開始量產銷售SWING-SHOCK。

2010年

1.台灣工廠開始籌備上市。2.增資資本額達新台幣5億元整。3.開發碳纖維製之底管、並開始量產銷售AXON-WERX。4.開發輕量化鎖死緩衝裝置、並開始量產銷售AXON-RL-R、EPICON-RL-R。

2011年

1.昆山新工廠動工興建。2.集團整體之避震前叉總生產數量達到800萬支。

2. The V-BOXX wins the silver medal at the Eurobike design award.3. Powder coating production line established at the Shenzhen factory.

2007

1. Completion of the new building with 4,000 square meters over floors.2. Introduced a production line for aluminum stanchion tubes.3. Commenced sales of V-BOXX internal gear box.4. Implementation of 4 „TOSHIBA“ 35O tons aluminum die-casting machines at Shenzhen factory.

5. SRSUNTOUR reaches a turnover of 40 billion yuan.

2008

1. Chairman Kobayashi succesfully finishes the Tour de Taiwan (cycling around Taiwan) with the A-TEAM members.2. Electric lock-out system development starts and the electric AXON-ELD goes on sale.3. Introduction of suspension forks with Q-LOC thru-axle system. 4. Introduction of the „AIDA“ 650 tons automatic press machine (September).

5. Three new „TOSHIBA“ aluminum casting machines of 350 tons and 500 tons introduced.

2009

1. Started the development of electric assisted E-bike systems at the Kunshan Plant.2. Developed a swing arm suspension fork and started selling the SWING-SHOCK fork.

2010

1. Preparations started for going public in Taiwan.

11Since 1988

history

2004 2005 2006 2007 2008 2009 2010 2011 2012 2013

2. Increase of capital to 500 million yuan.3. Started to develop a bottom case made of carbon, the top-end model AXON-WERX carbon goes on sale.4. Developed a new lightweight lockout cartridge, started selling AXON-RL-R, and EPICON-RL-R.

2011

1. groundbreaking new plant construction in Kunshan.2. achieved an 8 million total production volume of suspension forks with the whole SRSUNTOUR group.

3. Developed a lockout cartridge with compression damping adjustment, started selling AXON-RL-RC and EPICON-RL-RC suspension forks.4. High speed and low speed compression damping adjustment cartridge developed, the DUROLUX-RC2 suspension fork went on sale.5. Increase of capital to 600 million yuan.

2012

1. The newly completed factory in Kunshan goes operational in November2. Reached sales of 6 billion yuan with the total SRSUNTOUR group.

3.開發具備壓縮式阻尼調整機構之鎖死緩衝裝置、並開始量產銷售 AXON-RL-RC、EPICON-RL-RC。4.開發高速及低速壓縮式阻尼之調整式緩衝裝置、並開始量產銷售DUROLUX-RC2。5.增資資本額達新台幣6億元整。

2012年

1.昆山新工廠第1期工程完工、於11月開工生產。2.集團整體銷售額達新台幣60億元整。3.使用「AXON」全碳纖維式避震前叉之女子MTB選手榮獲奧運金牌。

2013年

實績與計畫1.舉辦創業25周年慶祝大會2.集團整體銷售額目標為新台幣65億元、避震前叉之目標銷售數量為1,100萬支。3.開始量產銷售新電動輔助系統「TWIN SENSOR」。

3. Women‘s MTB athletes using the „AXON“ full carbon fork suspension won the gold medal at the Olympic Games in London.

2013

Achievements and plans for 2013:1. 25th anniversary celebration in March.2. Target of 11 million sales volume of suspension forks and a total group sales volume of 6.5 billion yuan.3. Start of the “TWIN SENSOR“ E-BIKE components production.

歷史沿革


srsuntour taiwan inc.

台灣工廠

佔地面積：11,000㎡

員工人數：400名

生產品項：避震前叉、大齒盤、

後避震器、避震式座桿

台灣工廠為集團之主幹、主要是開發先端技術之鎂合金、碳纖維材質的中高級產品、率先運用豐田式管理系統後、之後全面展開至集團整體。

taiWan factory

11,000 m² site areanumber of employees: 400products: suspension fork, crankset, rear shock, suspension seatpost

the taiwan factory has become our high tech production plant. we develop high-end products that incorporate cutting-edge technology like magnesium die-casting or carbon production. In addition, we first introduce our entire production and management systems in taiwan before expanding to the entire group.

13Since 1988

工廠介紹 factories | divisions

srsuntour shenzhen (china)

深圳工廠

佔地面積：33,000㎡


生產品項：避震前叉、大齒盤

深圳工廠為集團的主力生產工廠、從素材開始至成品採一貫化的生產作業。內製率超過90%、能提供更穩定的品質。

shenzhen factory

33,000 m² site areanumber of employees: 800products: suspension fork, crankset

the taiwan factory has become our high tech production plant. we develop high-end products that incorporate cutting-edge technology like magnesium die-casting or carbon production. In addition, we first introduce our entire production and management systems in taiwan before expanding to the entire group.


srsuntour Kunshan (china)

昆山工廠

佔地面積：25,000㎡


生產品項：避震前叉、大齒盤、

變速器、E-BIKE系統

昆山工廠主要是生產集團原有製品、E-BIKE系統之開發及生產。新工廠於去年年底開始開工生產、使本集團可以充分地供應中國大陸之內需市場。

KUnshan factory

25,000 m² site areanumber of employees: 400products: suspension fork, crankset, transmission, e-biKe system

in addition to the production of our existing product line-up, we are developing new e-biKe systems and a new production line for e-bike components in Kunshan.the new factory established at end of last year has just started production and is increasing the capacity to meet the growing demand that comes from the dynamic domestic market.

15Since 1988

生產工廠與營業據點 Global expansion

TAIWANSR SUNTOUR Inc.#7 Hsing Yeh RdFu Hsing Industrial ZoneChang Hua, Taiwan

FRANCESR SUNTOUR FranceSAV service + salesParc d‘activités Alpespace604 voie Galilée73800 Sainte Hélène du lacFrance

polANdSR SUNTOUR EUROPE sp. zo. o. Przedstawicielstwo w PolsceSales and Customer Supportul. Ostrowska 49861-324 Poznan, Poland

BElgIumSR SUNTOUR EUROPE S.A.Boulevard Henri Rollin 51410 WaterlooBelgium

CHINASR SUNTOUR (Shen Zhen) Inc.Suibei Industrial Zone Suibei RoadGongming Town, Baoan DistrictShen Zhen, China

CHINA SR SUNTOUR Machinery (Kunshan) Co.Ltd.1500 HongHu Road , KunShan development zone JiangSu Province CHINA ZIP 215333

EuRopESR SUNTOUR EUROPE GmbHAm Marschallfeld 6a83626 ValleyGermany

uSASR SUNTOUR North America Inc.Sales and Service Center14511 NE 10th Avenue, Unit EVancouver, WA 98685

gERmANYSR SUNTOUR Technical Service CenterMax-Planck-Str. 897526 Sennfeld, Germany

全球化展開

本公司以台灣、深圳、昆山三地之工廠作為生產基地、將「SR SUNTOUR」品牌的產品銷向全世界、活用此三地工廠各自擁有的優勢、不單只針對開發、對於生產技術與製造之間的效率也作最大之提昇、充分對應客戶需求。在客戶服務方面、除了台灣與大陸以外、也在歐洲及美國設立了辦事處、在服務並照顧客戶之同時、對於主要客戶國家的代理商也提供充實又完整的幫助。

Global expansion

with our three production plants in Kunshan (mainland china), in shenzhen (mainland china) and in taiwan, the production of srsuntour products for the worldwide market is covered.utilizing the features of each of the three production plants, we are take full advantage of the efficiency between production technology and the research & development necessary to meet the needs of our customers. in addition besides taiwan and mainland china we have also established offices in USA and Europe to enhance follow-up with customer support and in terms of services in other major countries we work hand-in-hand with our official distributors.


technoloGy

all our higher-end products have a feature based on melt-forged. the technology is called accurad forging (ac4c) and has become an indispensable method which combines the benefits of casting and forging technology. this unique aluminium casting technology was adopted first for handlebars and stems. We have since extended the use of the ac4c technology to seat pillars, cranksets, hubs and suspension forks. since the beginning of the production, we have accumulated over 40 years of research and experiences and are keener than ever to continue investing our time and know-how into casting and processing technology research as well as assembly technology.

技術

在製造本公司的主要產品時、不能欠缺之技術為鋁合金的溶湯壓鑄法。我們為世界上最早將此技術用於生產自行車手把上之公司、之後、在生產座墊桿、大齒盤、花鼓以及避震前叉等產品時、也都利用了此技術。我們從開始生產以來、雖然累積了40年以上的研究開發經驗值、但仍舊致力於壓鑄技術、加工技術、組立技術之研究發展、並且持續不斷努力不懈。

17Since 1988

技術 technoloGy


prodUct development

we always start our approach to product developments by analysing the demands of our customers. at the same time we explore new materials, new technology to incorporate them into our new products. From the development stage to the finished product we always keep in mind the requirements given from the customers regarding quality, safety and price.

商品開發

本公司一直在致力追求客戶所需的產品、進而創造、開發出客戶需求的產品。對於新材料及新技術的探求也是不遺餘力、為的是希望能早一步將新開發的材料及技術運用在新產品上。當然、即使在開發階段、我們也不忘考量安全、品質、合理價格與客戶需求等層面、將之運用在產品的設計上。

19Since 1988

商品開發 research & development


innovative prodUction

since the introduction of the tps method we have been continuously incorporating new manufacturing reforms like the „tqm“ „tpm“ methods. the introduction of the [erp] system has lead to a multilateral use of information and a more efficient interface between sales, shipping, material supply, manufacturing, and finance. With all our departments centralized we are able to guarantee a reliable cost structure and consistent production quality.

生産革新

從「TPS」開始、我們陸續採用了「TQM」「TPM」等新製造技術。接著導入「ERP」系統、從材料投入開始到成品出貨為止，整合有關營業、製造、財務等資訊、並可以多方面、有效的分析及使用這些資訊、實現成本及品質穩定控管。

21Since 1988

生産革新 innovative prodUction


QUality control

we have a comprehensive, in-house quality control structure which stretches from basic material analysis to fatigue testing machines equipped with hydraulic servo arms and a three-dimensional measurement approach to precisely check the dimensions. also state-of-the-art testing machines to evaluate the strength and performance of our products are in-house which guarantees a stable and dependable supply of high quality products.

品質

我們引進了材料基本分析儀、產品測量所需的三次元量測儀器、強度與性能測試所必需的油壓馬達式疲勞測試機等各式最新最先進的測試設備、以提供客戶們更穩定的產品品質。

23Since 1988

品質管理 QUality control

25Since 1988

環境 environment

environment

phenomena such as global warming and environmental pollution on a global scale have become a dangerous problem. since our company obtained the iso14001 certification, we actively involve ourselves in environmental-friendly production on a global and local scale. the bicycle itself is an environmental-friendly product, and contributes to a healthy and sustainable life.

環境

環境污染及大規模地球暖化等現象、對我們居住的環境已經造成了傷害。本公司自取得ISO14000認證以來、即積極致力於讓地球環境返璞歸真的行動、也持續不斷地跟上其他各國的腳步。自行車對於社會環境及個人健康而言是一項很好的商品、也就是說、自行車產業的發展對於地球環境之改善、佔有相當重要的地位。

27Since 1988

產品競技場上之測試 field test by Werx

field test by Werx

some riders take our products over climbs above 3.000m high an epic descents. some riders travel 100.000 km per year around the world to test our forks at the world cup races. And other riders configure set-ups for special world cup races which last less than a minute. other riders spend their whole summer road tripping through europe or across north america from one freeride spot to another, sharing their caravan bed with their bikes. our ideas, our design solutions and our products wouldn’t be complete without these riders‘ feedback. our products come from race proven engineering.

關於WERX測試

有些選手選用WERX、登上比3,000米以上的高山、創造下坡競技的歷史記錄；有些選手每年於全世界比賽、騎乘約100,000公里測試WERX；甚至有些選手為挑戰賽程為一分鐘的世界級競賽、選用本公司的WERX；更有些選手使用WERX、花了整個夏天橫越北美或歐洲、日以繼夜測試WERX。我們的理念、設計觀點以及產品、若沒有這些選手的回饋、是無法完成的。我們的產品即是這些選手的測試成果所累積而成的。


roger rinderKnecht SUI

UCI MTB World Champion 4X 2012

anniKa lanGvad DK

UCI MTB World Champion XC Marathon 2012UCI MTB World Champion XC Marathon 2011

achievements

after many years of hard work by our engineers, mechanics and sponsored riders, SR Suntour finally received the ultimate product validation in 2011 and 2012 with numerous world cup wins, world champion titles and an olympic gold medal in london. aided by sr suntour‘s superior fork technology, Julie bresset, roger rinderknecht and annika langvad won gold at the world championships 2012. we have proven that sr suntour suspension forks are world class products ready for world class riders, and believe the best is yet to come.

WERX實績

多年以來、在本公司工程師、員工以及贊助選手的努力鑽研下、SR SUNTOUR的產品終於得到最高的肯定、並於2011及2012年贏得許多的世界杯獎項、其中有倫敦奧林匹克競賽金牌。藉由SR SUNTOUR卓越的前叉及技術協助下、JULIE BRESSET、ROGER RINDERKNECHT及ANNIKA LANGVAD選手們榮獲了2012世界杯金牌。我們已經證明SR SUNTOUR前叉已經是世界級水準的產品、並且廣受世界級選手的採用、也讓我們深信、本公司的產品即將登上世界的最頂峰。

29Since 1988

実績 achievements

Julie bresset fra

Olympic Gold Medal Winner MTB XC 2012UCI MTB World Champion XC Elite 2012UCI MTB World Champion XC U23 2011UCI MTB World Cup Overall Winner Elite XC 2011


願景展望

自行車、本來對環境而言是相當溫和的產品、同時對於個人健康而言也是很好的產物品。我們一直秉持著一個信念、就是不單單只是製造自行車零組件來販賣、最主要是要讓使用者都能感覺騎乘起來「很舒適」、「很有樂趣」、「很安全」的境界邁進。

1．創造能改善地球環境之自行車零組件。2．見到「SR SUNTOUR」就等於見到了安心與安全之品牌形象。3．於技術、開發方面、創造更有魅力之自行車零組件。4．持續穩定獲利、貢獻區域社會與國際社會。

31Since 1988

願景展望 fUtUre prospects

fUtUre prospects

the bicycle is a product that is good for your health and environmental friendly. by developping, producing and selling bicycle parts, we want to contribue to the lifestyle of cycling, and to make people feel comfortable and safe whilst having fun using the bicycle. this is what we as the manufacturer aim to continue.

1. the creation of bicycle parts that contribute to the improvement of the global environment.2. make the „sr suntour“ brand image synonymous with safety and reliability.3. the development of new technology and the creation of bicycle parts must always lead to a more valuable and attractive bike.4. Produce a stable profit, and contribute to the prosperity of the local community as well as to the global community. (sustainable, socially responsible and fair employment policy and production methods)

sr sUntoUr corporate

TAIWANSR SUNTOUR Inc.#7 Hsing Yeh RdFu Hsing Industrial ZoneChang Hua, TaiwanTel. +886 4 7695115Fax: +886 4 7694028E-mail: [email protected]: www.srsuntour-cycling.com

CHINASR SUNTOUR (Shen Zhen) Inc.Suibei Industrial Zone Suibei RoadGongming Town, Baoan DistrictShen ZhenTel. +86 755 27105533Fax: +86 755 27105633

CHINA SR SUNTOUR Machinery (Kunshan) Co.Ltd.388 Matang Road PengLang, KunShan development zone JiangSu Province China ZIP 215333Tel. +86 512 578 12530Fax: +86 512 578 12561

EuRopESR SUNTOUR Europe GmbHAm Marschallfeld 6a83626 ValleyGermanyTel. +49 8024 3038152Fax: +49 8024 4730984E-mail: [email protected]

uSASR SUNTOUR North America Inc.Sales and Service Center14511 NE 10th Avenue, Unit EVancouver, WA 98685Tel. 360 737 6450E-mail: [email protected]: www.srsuntourna.com

srsuntour 25th anniversary company profile

Documents