status report on the performances of a magnetized ecc (“mecc”) detector l.s.esposito lngs on...
Post on 21-Dec-2015
212 views
TRANSCRIPT
Status Report on the performances of a magnetized
ECC (“MECC”) detector
L.S.EspositoLNGS
on behalf of the ECC WG(http://people.na.infn.it/~pmiglioz/ISS-ECC-WG/
ISSMainPage.html)
Physics at Neutrino Factory
To exploit all the oscillation channels that are available thanks to the well know neutrino flux composition:
• e → μ (golden channel)
• e → (silver channel)
• anti-μ → anti-e
• anti-μ → anti-
their CP conjugates in the case of a -
What we want to measure
Identification, momentum and charge of the leptons (muons and in particular electrons)
Identify the different decay topologies of the lepton: h and e
Perform a complete and accurate kinematical reconstruction of neutrino events
The tools we propose to use
Emulsion sheets: large-scale production by automatic coating
Data taking: high speed automated track selector
Magnetic field: to distinguish neutrino/ anti-neutrino interaction
OPERA experience
Emulsion analysis Primary vertex topology Any decay topology e/ separation e/ separation multiple scattering & shower reconstruction end-of-range dE/dx (-separation)
8.3kg
10 X0
supermodule
8 m
Target Trackers
Pb/Em. target
Extract selected brick
Pb/Em. brick
8 cm Pb 1 mm
Basic “cell”
Emulsion
1 brick:10.2x12.7x7.5 cm57 Em. Plates + 2CS56 Pb (1 mm)
Topological and kinematical analysisevent by event
Summary of the eventreconstruction with OPERA
High precision tracking (x<1m, <1mrad)• Kink decay topology
• Electron and /0 identification Energy measurement
• Multiple Coulomb Scattering
• Track counting (calorimetric measurement) Ionization (dE/dx measurement)
• separation
• e/0 separation
Topological and kinematical analysis event by event
MECC structure
We focused on the “target + spectrometer” optimization
Electronic det:e/ separator
&“Time stamp”
Rohacell® plateemulsion filmstainless steel plate
spectrometertarget shower absorber
MECC structure optimization
Muon energy from 1 GeV to 10 GeV
Spacer thickness from 2 cm to 5 cm
Magnetic field: 0.25 T, 0.5 T, 1.0 T
Momentum measurement methods
Different methods have been used in the past talk:• Slope measurement
• Sagitta measurement
• Parabolic fit (also used for Kalman initialization)
• Kalman reconstruction All methods have been implemented in a single
program in order to ease the comparison N.B. For all methods, but the Kalman, the
momentum is compared at the exit of the target region (beginning of the spectrometer)
First example:4 GeV muon momentum resolution
Second example:4 GeV muon charge mis-identification
Performance of MECC:muon momentum resolution
3 cm gap0.5 T
Performance of MECC:electron momentum resolution
Only hits associated to the primary electrons are used in the parabolic fit.
No Kalman procedure used.
Given the non negligible energy loss in the target the electron energy at the exit is considered
3 cm gap0.5 T
Performance of MECC:muon charge mis-identification
3 cm gap0.5 T
Performance of MECC:electron charge mis-identification
3 cm gap0.5 T
Study of compact emulsion spectrometer
for identification of neutrino/anti-neutrino
interactionChika Fukushima
Satoru Ogawa, Mitsuhiro Kimura, Hiroshi Shibuya,
Koichi Kodama, Toshio Hara
Magnetic ECC used in the exposure
Compact ECC structure
Beam exposure
Dec. 7, 2005 KEK-PS T1 line
Different stack were exposed:• Different support used (40 μm polystyrene or 200 μm
acrylic plate)
• 2 GeV + [no magnet] 3000/cm2 as reference beam
• 1 T magnetic field
• Different beams: 0.5 GeV, 1. GeV and 2. GeV, each with 1000/cm2 + (-)
The sagitta method
L = 3 cm in this study
Spatial distribution
Results (preliminary) The relative error is roughly
ds/s = 0.20 0.029 p [GeV/c]
ds/s should be about 0.35 in thecase of p = 10 GeV/c
Assuming a Gaussian distribution, probability of the chargemis-identification for a 10 GeVlepton would be around 0.2%
N.B. Multiple Coulomb scattering has larger tails than a Gaussian distribution. The probability of the charge mis-identification should be somewhat larger than the abovevalue
Comments on the measurement
Although not with the final geometry, this measurement is an example of how (in an easy and fast way) the MECC performances can be studied
Advantages wrt the proposed setup• Better plate to plate alignment (few m instead of 10
m) Disadvantages wrt the proposed setup
• Only 2 gaps instead of 3
• Gap width 1.5 cm instead of 3 cm
Possible design far detector Let us assume transverse dimension of a plane equal to
15.7x15.7 m2 (as in the case of Nova) A brick contains 35 stainless steel plates 1 mm thick: it
corresponds to about 2 X0 A brick weigh 3.5 kg The spectrometer part consists of 3 gaps (3 cm each) and 4
emulsion films A wall contains 19720 bricks weight 68 tons If I consider 60 walls 1183200 bricks 4.1 kton In terms of emulsion films the target is: 47,328,000 pieces (in
OPERA we have 12,000,000) If I consider as electronic detector 35 Nova planes (corresponding
to 5.3 X0 ) after each MECC wall 2100 planes The total length of the detector is: about 150 m
Comments to the present design A highly segmented (with micrometric tracking) target
followed by a high resolution spectrometer can be built up to a total mass of about 4 kton
An electronic detector based on a technique à la Nova fulfils the requirements synergy with other detectors
The magnetization issue is common to the magnetized liquid scintillator detector synergy with other detectors
Finally, we are proposing a detector that combines the capability of the liquid scintillator technique in studying the golden channel, with the MECC technique capability in studying the silver and the platinum channels
interesting synergy among different techniques!
Caveat on the following slides The numbers quoted in the following are an
educated guess driven by the OPERA calculations and the MECC performances quoted before
The numbers are very preliminary, but are useful for a first evaluation of the impact of this detector on the NuFact sensitivity
N.B. The topological decay selection is “identical” to the one studied in OPERA (target material is 1 mm thick)
→ channel
Expected signal and background
Signal and background: 5yrs, 5 kton
The performances of this channel cannot be much better than in the OPERA case:• the muon measurement is similar in both detectors;• the main backgrounds comes from
•anti-neutrinos charm production very important the identification of the primary lepton. It was 97% in the old silver paper: is there room for improvement? If lepton ID by 1% background by 30% !!!⇑ ⇓• hadron decay in flight (20% of the total background)• background from scattering, although not dominant, much smaller than in the OPERA case (a factor 40)
D. Autiero et al., Eu.Phys.J C 33,243
→e channel
Expected signal and background
Comments This channel was not exploited in the past due to the impossibility
to measure the electron charge With the MECC the study of this channel becomes possible and it
is similar to the muonic one Main background: anti-neutrino charm production as in the
muonic case, but not the hadron decay in flight (20% less background)
Possible drawback: the electron ID is worse than the muon one (to be studied)
Possible improvement: the pt cut at the 2ry vtx can be lowered from 250 MeV to 100 MeV (meson decays are not an issue)
The MECC momentum resolution is better than the ECC one(~ 20% → ~10%): better kinematical analysis
We assume the same signal and background (reduced by 20%) as in the muonic case
→nh+nπ0 channel(it contains more than 50% of the signal)
Expected signal and background
Comments This channel was not exploited in the past due to the
impossibility to measure the hadron charge Main background: anti-neutrino charm production
(50%) and hadron interactions (50%) The MECC momentum resolution is better than the
ECC one (~ 20% → ~10%): better kinematical analysis
Possible improvements:• The kinematical analysis both at the 1ry and 2ry vtx can be
improved given the better momentum measurement: in OPERA kinematical analysis has poor efficiency
• Only negative hadrons may contribute to the background → the hadron interaction back. decreases by a factor 2
Summary of the silver channel
Take it with care, very preliminary!!!
Signal (θ13=2°,δ=0°) Signal (θ13= 2°, δ=90°) Background
L=732km old 2.1 7.2 23.9
L=3000km old 2.8 5.1 2.4
L=732km new 6.4 21.5 60
L=3000km new 8.4 15.3 6.0
Conclusion and outlook Detailed study of the performance of a magnetized stainless steel target A proposal of a possible design of far detector A first test at KEK gave good results Basic performances of the detector can be easily studied with a single brick:
no need for large R&D and prototype construction, but an extensive test beam program is mandatory
A preliminary estimate based on the OPERA experience and taking into account the MECC features indicates that the number of silver events can be increased by about a factor 3
The way how to magnetize large volumes is a common task If no field only the muonic decay is left to study the silver channel The choice of the electronic detector could bring interesting synergies Finalize the electron analysis: the e/ separation and the charge
reconstruction Study the muon identification with the electronic detector Check the sensitivity to the “golden” (the muon threshold is at 3 GeV!) A full simulation of neutrino events is mandatory in order to evaluate the
oscillation sensitivity