submittal ac024mnadch/aa samsunghvac … · 888-699-6067 submittal ac024mnadch/aa page 3 of 3...

3
Job Name Location Purchaser Engineer Submitted to Reference Approval Construction Unit Designation Schedule # SUBMITTAL Page 1 of 3 www.SamsungHVAC.com * Nominal cooling capacities are based on: Indoor temperature: 80ͼF DB, 67ͼF WB. Outdoor temperature: 95ͼF DB, 75ͼF WB. * Nominal heating capacities are based on: Indoor temperature: 70F DB, 60F WB. Outdoor temperature: 47F DB, 43F WB. Samsung HVAC maintains a policy of ongoing development, specifications are subject to change without notice. Refer to www.AHRIdirectory.org for current reference numbers. Specifications AC024MNADCH/AA Samsung, High-Wall Evaporator, Split System AC024MNADCH/AA AC024JXADCH/AA 24,000 / 27,000 7,000 - 27,000 5,200 - 31,000 18.3 / 10.21 3.08 10.8 10227625 1 / 208-230 / 60 176 - 254 (max. 3% deviation from each) 2.5 / 10.4 / 10.5 2.5 / 11.4 / 14.5 20 12.5 41 7/8 X 11 5/8 X 11 7/8 37 X 39 5/16 X 13 32.19 142.20 Aluminum Fin / Copper Tube 18 1/4 Aluminum, flat fin, micro channel 32 / 35 / 39 / 43 50 / 50 23 ≤ T ≤ 115 0 ≤ T ≤ 115 w/wind baffle -4 ≤ T ≤ 76 61 ≤ T ≤ 90 T ≤ 80 1/4" 5/8" 164 98 11/16" OD R410A Electronic Expansion Valve 74.08 25 ft 0.11 oz/ft over 25 ft Samsung Inverter Driven, Twin BLDC, Rotary 9.0 BLDC with Crossflow fan (1) 410 / 477 / 551 27 W / 0.70 A BLDC With Axial Type Fan (1) 0.48 A / 125 W / 2,190 CFM MWR-SH00N MWR-WE11N MRW-TA MIM-B14 MIM-N01 CKN-250 WBF-2M 25' - ILS2509 50' - ILS5009 Wall-mounted evaporator Low ambient control built in The outdoor unit shall supply power to indoor unit via 14 AWG X 3 power wire Auto-restart after power loss The outdoor unit shall have a snow accumulation prevention option setting to prevent snow drifting against an idle outdoor unit. The indoor unit shall have a removable EEPROM that stores system programming information, unit name, and other data All indoor unit addressing and option settings shall be done digitally; the indoor unit does not contain rotary dials or setting switches. The outdoor unit shall have a night time quiet mode option to reduce operating sound during the night. (Automatic or manual activation with dry contact signal) Construction The outdoor unit shall be galvanized steel with a baked on powder coated finish for durability Indoor unit chassis shalle be UL94 V0 with a galvanized steel mounting plate Heat Exchanger The indoor unit heat exchanger shall be mechanically bonded fin to copper tube The outdoor unit heat exchanger shall be aluminum, flat fin, micro channel Controls Control signal shall be a DDC type signal Interconnect control wire between outdoor indoor unit shall be 16AWG X 2 shielded Wired or wireless controls must be purchased separately Connection to optional wired controllers shall be 2 X 16AWG shielded wire Controls shall integrate with a BMS system The system shall integrate with the Samsung NASA Controls Solution No additional interface modules/adapters are required when connecting to Samsung NASA DVM S central control options (MIM-D01AUN, MIM-B17BUN, MIM-B18BUN, MCM-A300N). Refrigerant System The refrigerant shall be R410A The compressor shall be hermetically sealed, inverter controlled, twin BLDC Rotary Refrigerant flow shall be controlled by an electronic expansion valve at outdoor unit Soft-start to reduce current demand during compressor start Warranty 10 years compressor, 10 years parts, 1 year limited labor (conditions apply) MIM-H03UN WBB-3M Nominal Capacity Cooling / Heating (Btu/h) Cooling (Btu/h) Heating (Btu/h) Voltage ø / V / Hz Cooling (A) Heating (A) Max. Breaker Amps Indoor Unit Outdoor Unit Indoor Unit Outdoor Unit Type FPI Pipe Diameter (in.) Outdoor Unit Type Indoor Unit dB(A) (Silent) / L / M / H Outdoor Unit dB(A) Cooling / Heating (high) Heating Cooling Heating High side (flare) Low side (flare) Factory Charge oz. RLA Amps Air Volume CFM (L/M/H) Simplified Premium w/scheduling Simplified Touch Controller Front Back Certifications Safety ETL (UL 1995) Optional Accessories External Contact Control Central Control Interface Module for Connection to DVM Plus Controls (non-NASA) Wall Bracket (for outdoor unit) Wind Baffles Line Sets - insulated and flared, interconnect cables included Devices: PCB fuses, indoor unit terminal block thermal fuse, current transformer, over-voltage protection, crankcase heating, temperature limit protection logic, compressor overload sensing External Temperature Sensor Wi-Fi Adapter Wired Controller FLA / Watts / CFM (max.) Refrigerant Type Control Method Charged for Additional Refrigerant Compressor Manufacturer Type Evaporator Fan Type Condenser Fan Motor Output (W) / FLA (A) Operating Temperatures (F) Outdoor Cooling Indoor Pipe Connections Indoor & Outdoor Maximum (ft.) Maximum Vertical Separation (ft.) Condensate Connection W X H X D (in.) Weight (lbs.) Heat Exchanger Indoor & Outdoor Unit Sound Pressure Level Dimensions Model Indoor Unit Model Number Outdoor Unit Model Number AHRI Certification Number Power Working Voltage Range (VAC) Operating Current (min. / std. / max.) Min. Circuit Ampacity (A) Performance Capacity Range SEER / EER COP (nominal heating) HSPF MWR-SH10N Wireless Controller MR-EH00U Vjg kpfqqt wpkv ujcnn jcxg gcu{/ceeguu to yktg. rkrg. cpf ftckp eqppgevkqpu xkc access rcpgn qp htqpv qh wpkv hqt gcukgt kpuvcnncvkqp cpf ugtxkeg © 2018 Samsung HVAC SHA-CAC-07232018 888-699-6067 www.SamsungHVAC.com

Upload: dangque

Post on 25-Jul-2018

232 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SUBMITTAL AC024MNADCH/AA SamsungHVAC … · 888-699-6067  SUBMITTAL AC024MNADCH/AA Page 3 of 3 Samsung, High-Wall Evaporator, Split System AC024JXADCH/AA Dimensional Drawing ¡

Job Name LocationPurchaser EngineerSubmitted to Reference Approval ConstructionUnit Designation Schedule #

SUBMITTAL Page 1 of 3 www.SamsungHVAC.com

* Nominal cooling capacities are based on: Indoor temperature: 80 F DB, 67 F WB. Outdoor temperature: 95 F DB, 75 F WB.* Nominal heating capacities are based on: Indoor temperature: 70⁰F DB, 60⁰F WB. Outdoor temperature: 47⁰F DB, 43⁰F WB.

Samsung HVAC maintains a policy of ongoing development, specifications are subject to change without notice. Refer to www.AHRIdirectory.org for current reference numbers.

Specifications

AC024MNADCH/AASamsung, High-Wall Evaporator, Split System

AC024MNADCH/AAAC024JXADCH/AA

24,000 / 27,0007,000 - 27,000 5,200 - 31,000

18.3 / 10.213.0810.8

10227625

1 / 208-230 / 60176 - 254 (max. 3% deviation from each)

2.5 / 10.4 / 10.52.5 / 11.4 / 14.5

2012.5

41 7/8 X 11 5/8 X 11 7/837 X 39 5/16 X 13

32.19142.20

Aluminum Fin / Copper Tube181/4

Aluminum, flat fin, micro channel

32 / 35 / 39 / 4350 / 50

23 ≤ T ≤ 1150 ≤ T ≤ 115 w/wind baffle

-4 ≤ T ≤ 7661 ≤ T ≤ 90

T ≤ 80

1/4"5/8"16498

11/16" OD

R410AElectronic Expansion Valve

74.0825 ft

0.11 oz/ft over 25 ft

SamsungInverter Driven, Twin BLDC, Rotary

9.0

BLDC with Crossflow fan (1)410 / 477 / 55127 W / 0.70 A

BLDC With Axial Type Fan (1)0.48 A / 125 W / 2,190 CFM

MWR-SH00N

MWR-WE11N

MRW-TAMIM-B14

MIM-N01

CKN-250WBF-2M

25' - ILS250950' - ILS5009

• Wall-mounted evaporator

• Low ambient control built in

• The outdoor unit shall supply power to indoor unit via 14 AWG X 3 power wire

• Auto-restart after power loss

• The outdoor unit shall have a snow accumulation prevention option setting to prevent snow drifting against an idle outdoor unit.

• The indoor unit shall have a removable EEPROM that stores system programming information, unit name, and other data

• All indoor unit addressing and option settings shall be done digitally; the indoor unit does not contain rotary dials or setting switches.

• The outdoor unit shall have a night time quiet mode option to reduce operating sound during the night. (Automatic or manual activation with dry contact signal)

Construction The outdoor unit shall be galvanized steel with a baked on powder coated finish for durability

Indoor unit chassis shalle be UL94 V0 with a galvanized steel mounting plate

Heat Exchanger The indoor unit heat exchanger shall be mechanically bonded fin to copper tube

The outdoor unit heat exchanger shall be aluminum, flat fin, micro channel

Controls Control signal shall be a DDC type signal

Interconnect control wire between outdoor indoor unit shall be 16AWG X 2 shielded

Wired or wireless controls must be purchased separately

Connection to optional wired controllers shall be 2 X 16AWG shielded wire

Controls shall integrate with a BMS system

The system shall integrate with the Samsung NASA Controls Solution

No additional interface modules/adapters are required when connecting to Samsung NASA DVM S central control options (MIM-D01AUN, MIM-B17BUN, MIM-B18BUN, MCM-A300N).

Refrigerant System The refrigerant shall be R410A

The compressor shall be hermetically sealed, inverter controlled, twin BLDC Rotary

Refrigerant flow shall be controlled by an electronic expansion valve at outdoor unit

Soft-start to reduce current demand during compressor start

Warranty 10 years compressor, 10 years parts, 1 year limited labor (conditions apply)

MIM-H03UN

WBB-3M

Nominal Capacity Cooling / Heating (Btu/h)Cooling (Btu/h)Heating (Btu/h)

Voltage ø / V / Hz

Cooling (A)Heating (A)

Max. Breaker Amps

Indoor UnitOutdoor UnitIndoor UnitOutdoor Unit

TypeFPIPipe Diameter (in.)

Outdoor Unit Type

Indoor Unit dB(A) (Silent) / L / M / HOutdoor Unit dB(A) Cooling / Heating (high)

HeatingCoolingHeating

High side (flare)Low side (flare)

Factory Charge oz.

RLA Amps

Air Volume CFM (L/M/H)

Simplified

Premium w/schedulingSimplified Touch Controller

FrontBack

CertificationsSafety

ETL (UL 1995)

Optional Accessories

External Contact ControlCentral Control Interface Module for Connection to DVM Plus Controls (non-NASA)Wall Bracket (for outdoor unit)

Wind Baffles

Line Sets - insulated and flared, interconnect cables included

Devices: PCB fuses, indoor unit terminal block thermal fuse, current transformer, over-voltage protection, crankcase heating, temperature limit protection logic, compressor overload sensing

External Temperature SensorWi-Fi Adapter

Wired Controller

FLA / Watts / CFM (max.)

Refrigerant

TypeControl Method

Charged for Additional Refrigerant

CompressorManufacturer Type

Evaporator FanType

Condenser FanMotor

Output (W) / FLA (A)

Operating Temperatures (⁰F)

OutdoorCooling

Indoor

Pipe Connections

Indoor & Outdoor

Maximum (ft.)Maximum Vertical Separation (ft.)Condensate Connection

W X H X D (in.)Weight (lbs.)

Heat ExchangerIndoor & Outdoor Unit

Sound Pressure Level

Dimensions

ModelIndoor Unit Model NumberOutdoor Unit Model Number

AHRI Certification Number

Power

Working Voltage Range (VAC)Operating Current(min. / std. / max.)

Min. Circuit Ampacity (A)

Performance

Capacity Range

SEER / EER COP (nominal heating)HSPF

MWR-SH10N

Wireless Controller MR-EH00U

to access

© 2018 Samsung HVAC SHA-CAC-07232018

888-699-6067 www.SamsungHVAC.com

Page 2: SUBMITTAL AC024MNADCH/AA SamsungHVAC … · 888-699-6067  SUBMITTAL AC024MNADCH/AA Page 3 of 3 Samsung, High-Wall Evaporator, Split System AC024JXADCH/AA Dimensional Drawing ¡

888-699-6067 www.SamsungHVAC.com

Page 2 of 3 SUBMITTAL AC024MNADCH/AASamsung, High-Wall Evaporator, Split System AC024MNADCH/AA Dimensional Drawing

41 15/16"

41 15/16"

11 9/16"

11 7

/8"

2 5/16"

3 1/

4"3

13/1

6"

11 1/4" 11 1/4"

11 7

/8"

2 9/16"

6 5/8"

1 5/

16"

15/1

6"

4 5/16" 3 5/16"22 7/16"

Ø 2 9/16"6 5/8"

3 5/16" 4 5/16"

1 5/

16"

2 1/

2"5 3/16"

2 7/16"

1/4"

5/8"

11/16"

1 Liquid pipe connection

2 Gas pipe connection

3 Drain pipe connection

4 Power supply & Communication wiring conduit

No. Name Description

Page 3: SUBMITTAL AC024MNADCH/AA SamsungHVAC … · 888-699-6067  SUBMITTAL AC024MNADCH/AA Page 3 of 3 Samsung, High-Wall Evaporator, Split System AC024JXADCH/AA Dimensional Drawing ¡

888-699-6067 www.SamsungHVAC.com

Page 3 of 3 SUBMITTAL AC024MNADCH/AASamsung, High-Wall Evaporator, Split System AC024JXADCH/AA Dimensional Drawing

1

LiquidSuction

Drainage hole4