tda-f series · tda-f series was tested in accordance with en 12101-3:2002 and satisfied the...
TRANSCRIPT
![Page 1: TDA-F Series · TDA-F series was tested in accordance with EN 12101-3:2002 and satisfied the performance criteria for Class F250, F300, F400." TDA-F系列风机根据EN 12101-3:2002标准进行测试,各方](https://reader030.vdocuments.pub/reader030/viewer/2022040900/5e6f46aec11ad5072252be0c/html5/thumbnails/1.jpg)
SMOKESPILL AXIAL FANTDA-F Series消防排烟轴流风机
![Page 2: TDA-F Series · TDA-F series was tested in accordance with EN 12101-3:2002 and satisfied the performance criteria for Class F250, F300, F400." TDA-F系列风机根据EN 12101-3:2002标准进行测试,各方](https://reader030.vdocuments.pub/reader030/viewer/2022040900/5e6f46aec11ad5072252be0c/html5/thumbnails/2.jpg)
Model 型号 A B C D N° ∅
Weight 重量 (kg)*
Model 型号 A B C
D
N° ∅
重量
315 315 355 395 355 8 10 8 800
355 355 395 435 355 8 10 10 D80 900 900 945 1000 630 18 12 66 D160M
400 400 440 480 355 12 10 11 1000 1000
450 450 490 530 400 12 10 14 D90L 1120 1120 1185 1250 900 24 12 135 D225M
500 500 540 580 500 12 10 18 1250
560 560 605 660 500 12 10 22 D112M 1400 1400 1465 1530 1100 32 14 220 D250M
630 630 675 730 500 12 10 24 1600
710 710 755 810 500 18 12 40 D112M
• Motor frame size beyond this range, please consult KRUGER for details * Weight without motor and impeller.
TDA-F SeriesSMOKESPILL AXIAL FLOW FAN - 消防排烟轴流风机
Dimension – 尺寸
ØA
ØB
ØC
DN° x Ø
All Dimension in mm. 单位:毫米 (mm)
ApplicationSuitable for smoke exhaust system in shopping malls, hospitals,commercial buildings, airport etc.
ConstructionDouble flanged casing is produced in mild steel or galvanised steel.
FinishPainting or galvanization after manufacture is all parts.
MotorTotally enclosed Class H (comply with BS En 12101-3:2002, Class F250, F300, F400) with a min. IP54 protection. Motors up to 2.2Kw are usually supplied on DOL starting, motors 3.0kW and above are star/delta starting.
ImpellerThe blades are made of Aluminium. The pitch angle can be adjusted manually.
Airflow DirectionAir flow from impeller to motor is fitted as standard. Air flow from motor to impeller can be supplied upon request.
应用
适用于商场、医院、商务楼、机场等各种场所的消防排烟系统。
结构
筒体材料采用低碳钢或镀锌钢板,进出口皆带法兰。
表面处理
所有部件在加工完毕后都经过着漆或镀锌处理。
电机
叶片
铝制叶片,其角度可手工调节。
气流方向
气流经由叶轮至电机为标准气流方向。应要求可提供经由电机至
叶轮的气流方向。
IMPORTANT NOTE :
This is to allow periodic testing of the fan.
特别注意:
standard on
Max. MotorFrame Size
最大电机型号
D71
D90S
D90L
D112M
Max. Motor
845800 900 560 18 12 49 D132M
1050 1100 630 24 12 73 D160M
1250 1315 1380 1000 170 D250M 24 12
1600 1663 1730 1250 275 D250M 32 14
Frame Size
最大电机型号 (kg)*Weight
电机机座尺寸超出表中范围时,请与科禄格公司联系。 *表中重量不含电机和叶轮。
全封闭电机、 ̒ H ’级绝缘,并符合 EN 12101-3:2002 标准之
F250、F300、F400 级规定。功率 2.2kW 及以下采用直接启动方
式,3.0kW 及以上采用星-三角启动。
Motor should be selected to handle air at normal room temperature based on specified air volume and static pressure.
电机应基于常温下指定流量和静压来选型,以便定期检测。
![Page 3: TDA-F Series · TDA-F series was tested in accordance with EN 12101-3:2002 and satisfied the performance criteria for Class F250, F300, F400." TDA-F系列风机根据EN 12101-3:2002标准进行测试,各方](https://reader030.vdocuments.pub/reader030/viewer/2022040900/5e6f46aec11ad5072252be0c/html5/thumbnails/3.jpg)
*** Shaded portion is the recommended operating range based on the duct velocity consideration (friction loss of 1 Pa/m)
6 POLES - 900 RPM
QUICK SELECTION GUIDE – 50 Hz 快速选型向导 – 50Hz
1.3 .4 .5 .6 .7 .8 .9 2 87653 410
100
10001400
2030
50
200300
500
315355
400450 500
560 630
Ps (Pa)
Q (m3/s)
900
10
63056060
.4.3
20
10
4030 315
.9.8.7.6.5 1
355 400
2.51.5 32
450 500
987654
400
100
300200
1200
600
1000
Ps (Pa)
710 800
2515 20 30Q (m3/s)
12501000
1120
1000900800
20
10
40
450
400
8060
100
200
1000
600800
140012501120
500 560 630710
10.3 .4 1.5 .6 .7 .8 .9 2 31.5 4 5 6 7 8 9 3020 2515 40Q (m3/s)
Ps (Pa)
2 POLES - 2800 RPM
4 POLES - 1420 RPM
6 POLES - 900 RPM
*** 阴影部分为推荐运行范围,该操作范围根据摩擦阻力为 1Pa/m 时的风管风速来制定。
![Page 4: TDA-F Series · TDA-F series was tested in accordance with EN 12101-3:2002 and satisfied the performance criteria for Class F250, F300, F400." TDA-F系列风机根据EN 12101-3:2002标准进行测试,各方](https://reader030.vdocuments.pub/reader030/viewer/2022040900/5e6f46aec11ad5072252be0c/html5/thumbnails/4.jpg)
LEA017.C
Certification – 认证
Ancillaries 附件
A B C D H J K O P Q N°x Ø M°x Ø
315 265 315 25 50 209 355 263 355 391 10 2x10 2x16 4
355 290 355 25 50 237 395 263 395 431 10 2x10 2x16 4
400 304 400 25 50 265 440 263 440 476 10 2x10 2x16 4
450 375 450 25 50 288 490 288 490 526 10 2x10 2x16 4
500 415 500 25 50 313 540 324 540 576 10 2x14 2x16 4
560 460 560 25 50 350 610 324 605 641 10 2x14 2x16 4
630 530 630 25 50 385 680 324 675 711 10 2x14 2x20 4
710 616 710 25 50 431 762 324 755 795 12 2x16 2x20 6
800 700 800 25 50 474 851 384 845 885 12 2x16 2x20 6
900 800 900 25 50 526 951 416 945 985 12 2x16 2x20 6
1000 900 1000 25 50 575 1051 416 1050 1090 12 2x16 2x20 8
1120 1020 1120 25 50 655 1182 684 1185 1240 12 2x16 2x20 8
1250 1050 1250 50 100 722 1314 784 1315 1370 12 3x20 2x24 8
1400 1200 1400 50 100 797 1464 884 1465 1520 14 3x20 2x24 8
1600 1400 1600 50 100 920 1665 970 1663 1718 14 3x20 2x24 8
Dimension 尺寸
Model
型号
No. Struts支杆数量
All Dimension in mm. 单位:毫米(mm)
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products.Certified dimension can be provided upon request.
A member of
Edition 5Printed on Jan 14
3
CD
A
B
H
Hanger - HA
J
K
Mounting Feet - MF
° x ØN
M° x Ø
ØO
ØP
Q
No. Struts
脚座 - MF 支架 - HA Protection Net 防护网
Certified by TÜV SÜD which is a leading international service organization focusing on consulting, testing, certification and training.
TDA-F series was tested in accordance with EN 12101-3:2002 and satisfied the performance criteria for Class F250, F300, F400."
TDA-F 系列风机根据EN 12101-3:2002 标准进行测试,各方
面性能均能满足BS 标准中F250,F300 及 F400 级规定。
Class
等级Temperature
温度 (°C)
Minimum functioning period
最短有效时长 (minutes)
F200 200 120 F300 300 60 F400 400 120 F600 600 60 F842 842 30
Others 250 120
经TÜV SÜD测试认证中心认证,该中心是国际上
全球范围内提供全面产品测试、检验和
公认的在
认证服务的机构。
TDA-F series were also tested by „China National Center Supervision and Testing of Fire Building Materials‟with the performance criteria for 280 °C at 60 mins.
TDA -F 系列消防排烟轴流风机也已通过中国“ 国
监督检验中心” 对其进行的280 °C高温,运行60分钟的型式检验。
本公司持续改进和研发新的产品,本公司保留对本样本作出修改的权利。本公司可应用户要求提供详细尺寸数据。
家消防装备质量
for Quality (NFTC), complies
05/12NO. 10 Buroh Street #06-06, West Connect Building,
Singapore-627564