Slide 1

Tempest Wireless Intercom ROAMING V1.0 Slide 2 Manual Roaming iSelect Seamless Roaming Automatic Roaming Available Roaming Methods Slide 3 Uses proven Tempest hardware and Tempest 2.4GHz RF technology Requires the New ZSync Dongle or New ZSync Parallel Sync Generator Can operate in Normal, Split, or Shared Modes Seamless and Automatic Roaming Slide 4 Allows users to Roam between multiple Tempest 2.4GHz BaseStations A minimum of one BaseStation is required for each Zone (with or without a Remote Transceiver) BeltStations can be individually configured to Roam in up to sixteen Zones Zones can be defined as one or many different locations Seamless and Automatic Roaming Slide 5 Customizable for almost any application If required, all Users can Roam Or, some Users can Roam while others remain in a single Zone You decide which users can Roam, and to which zones they can Roam Allocate resources only where they are needed Seamless and Automatic Roaming Slide 6 Simply one or more areas with Tempest RF coverage Indoors or outdoors What is a Zone? Slide 7 Tempest Seamless Roaming Examples Next, we will show you several examples of Roaming applications Remember, these are just a few of the many ways you can use Tempest Roaming Slide 8 Tempest Seamless Roaming 5 Users in Normal Mode Tempest exactly as you know it, with greater coverage 2 Zone Example with 2 Bases Slide 9 5 Users in Normal Mode Now with 3 Zones Greater coverage Simply and easily 3 Zone Example with 3 Bases Tempest Seamless Roaming Slide 10 Because you cannot always have seamless uninterrupted coverage Reconnect as soon as you enter the new coverage area 3 Zone Example with 3 Bases Automatic Roaming Example Slide 11 3 BaseStations All in Normal Mode 3 Zones 3 Roaming users 6 Stationary users 9 Users 3 Zone Example with 3 Bases and 9 Users Limited Roaming Example Slide 12 Unlimited Users in Shared Mode 3 BaseStations 3 Zones Maximum of 5 Users talking on one base Max of 15 Users talking in 3 Zones 3 Zone Example with 3 Bases Shared Mode Example Slide 13 6 bases total 3 Normal and 3 Shared bases 5 Normal Mode Users and Unlimited Shared Mode Users Maximum of 20 Users talking Example with 6 Bases: 3 for Normal Users and 3 for Shared Users Dual Mode Example Slide 14 Tempest Roaming Features No RF expertise needed Large coverage areas possible with many zones Overlapping coverage with non-destructive multi-antenna/multi-base capability Modular Different users can have different Roaming areas Slide 15 Tempest Roaming All Roaming parameters are accomplished in software Roaming can be configured on-the-fly from the BeltStation Roaming decisions are intelligent Selectable sensitivity (bias) for enhanced performance Slide 16 Tempest Wireless Intercom ROAMING For more information, visit www.tempestwireless.com