the chameleon series is designed to measure the … 127 - 2007 and nist ... sensitivity even for low...
TRANSCRIPT
20 WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475
Spectroradiometer
Chameleon
The Chameleon Series is designed to measure
the absolute spectral of power, of the light under
test. Adding optical probes and absolute
calibration turns this type of measurement
system into a spectroradiometer.
• Spectral radiant flux ( W/nm )
• Peak wavelength ( λp )
• Dominant wavelength ( Hue: λd )
• Center wavelength ( λc )
• Excitation purity ( Chroma: % )
• Chromaticity coordinates ( x, y @ CIE-1931 )
• C.C.T ( Correlated Colour Temperature )
• C.R.I ( Colour Rendering Index )
LED ApplicationsMeasuring LED parameters presents particular
challenges for metrology equipment. For example
CIE compliant adapters for measuring luminance
intensity and flux can have a low light efficiency.
The Chameleon system uses a directly coupled
light throughput lens unit which ensures the
overall system sensitivity even for low light level
LED measurement. This optical system is also a
wide range of LEDs to be tested from small SMT
designs to high power LEDs. The proven
Chameleon has built in colorimetric and
radiometric capability which are campatible with
CIE 127 - 2007 and NIST traceable.
The Unique Optical
DesignThe Chameleon designed with slid-in N.D. filter
between optical light path. The Chameleon is a
low cost system with a wide dynamic range.
SPEED / STABILITY / ACCURACY
Chameleon - Spectroradiometer SpecificationsChameleon - Spectroradiometer Specifications
Spectral Range 380 to 780 nm
Measuring Items IV 9 cd, lm, w) x, y,λd, λc, FWHM, CCT, CRI -
Spectral Resolution 2.5 nm
Measurement
Accuracy
IV: ± 7%, *1 λD: ± 1nm x, y: 0.005 ( stabilized lamp) -
Repeatability IV: ± 2% λD: ± 0.3nm x, y: 0.002 ( stabilized lamp) -
Interface USB 2.0 -
Dimension 140 × 80 × 180 ( spectrometer only) mm
Power USB 2.0 bus-powered or ext. DC 5V -
*1 Directly after calibration relative to the calibration standard
WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475 21
Model Luminous Intensivty
Sensitivity Range ( with changeable N.D filters)
Chame - IH 100 5 mcd to 18 cd
Chame - LH 200 20 mlm to 400 lm
LED CHARTERIZATION FOR
PRODUCTION & QUALITY CONTROL
Luminous Intensity ( cd)
AX08 and SMD LED socket
Luminous Flux ( lm )
Online auto loading light
bar test
Measurement Of Luminous
IntensityThe Chame IH100 adapter provides CIE-127-2007
measurements of luminous intensity and all spectral
parameters (e.g. dominant wavelength). Precision
engineering maintains the specified measurement distance
of precisely 10 cm from a detector with an area of 1 cm².
The Chameleon-LH200 integrating sphere adapter is
available for measuring luminous flux and radiant power.
The LED test fixture is used to push the LED into the
opening of the sphere in such a way that all the light
radiation is launched into the integrating sphere. The
interior of the integrating sphere has a highly reflective and
diffusing white coating which is specially flat for this
purpose. Auxiliary lamp as a standard accessory.
Measurement
of Luminous
Flux for high
power LED
Measurement Of Luminous
Flux For LightingThe Chameleon series can be equipped with a 500mm
diameter integrating sphere and comes with 50mm
diameter input port which extends the D.U.T. dimension for
most of LED lighting application.
Measurement Of Luminous
Flux For High Power LED
• Light Bar for Flat Panel
Display back light
• Chip on Board COB
• High Power Flash
Lighting
Applications
22 WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475
Spectroradiometer
Chameleon
CHAMELEON SPECTRORADIOMETER OPTICAL PARAMETER SPECIFICATIONSCHAMELEON SPECTRORADIOMETER OPTICAL PARAMETER SPECIFICATIONS
MODEL CHAME - LH 200 UNIT
Measuring Speed 300mS * IV (cd,lm,w) x,y, λd,λp,λc, FWHM -
Spectral Range 380 to 780 nm
Measuring Items IV (cd,lm,w) x,y, λd,λp,λc, FWHM, CCT, CRI -
Spectral Resolution 1 nm
Measurement Accuracy IV: ±7% *1 λD: ±1 nm x, y: 0.005 -
Sensitivity Range 5 mcd to 30000 mcd or 20 mlm to 200 lm -
Repeatability IV: ±2% λD: ±0.3 nm x, y: 0.002 -
Interface USB 2.0 -
Demension 140 × 80 × 180 mm
Power Supply by USB 2.0 or DC 5V -
CHAME - 3000 LED ELECTRICAL PARAMETER TESTER SPECIFCATIONCHAME - 3000 LED ELECTRICAL PARAMETER TESTER SPECIFCATIONCHAME - 3000 LED ELECTRICAL PARAMETER TESTER SPECIFCATIONCHAME - 3000 LED ELECTRICAL PARAMETER TESTER SPECIFCATION
MODEL CHAME-3000
-SL1
CHAME-300
0-SL2
CHAME-3000
-SL3
CHAME-3000CHAME-3000
-SH1
CHAME-3000
-SH2
CHAME-3000
-SH3
UNIT
Measurement Speed 20 30 45 40 80 120 mS
Measurement Items Measuring VF, Ir, Polarity JudgmentMeasuring VF, Ir, Polarity JudgmentMeasuring VF, Ir, Polarity JudgmentMeasuring VF, Ir, Polarity JudgmentMeasuring VF, Ir, Polarity Judgment -
Current Range 0 - 5000 - 5000 - 500 0 - 15000 - 15000 - 1500 mA
Voltage Range 0 - 100 - 10 0 - 100 - 10 V
Measuring Range 0 - 10.000 - 10.000 - 10.00 0 - 10.000 - 10.000 - 10.00 VMeasuring Range
0 - 1000 - 1000 - 100 0 - 1000 - 1000 - 100 uA
Measurement
Accuracy
VF: ±0.5% IR: ±0.5% ( Full scale )VF: ±0.5% IR: ±0.5% ( Full scale )VF: ±0.5% IR: ±0.5% ( Full scale )VF: ±0.5% IR: ±0.5% ( Full scale )VF: ±0.5% IR: ±0.5% ( Full scale ) -
Chame - 3000 LED Source / MeterChame-3000 is a LED source/meter. It provides forward current up to
1500mA suitable for most high power LED. It also measures forward
voltage and reverse current of LED. Chame-3000 can provide up to
3 channels that is a powerful tool for single chip LED and triple chips
RGB LED electrical and optical parameters characterization.
The Software Function as below.
Hardware Settings
• Chameleon Spectral Radio Meter
• Chame -3000 Source Meter
• Handler Interface
• Polarity Test
• Multi chip LED's
Measurement Parameters
• Optical and/or electrical measurements
• Current/voltage mode
• Current/voltage limits for protecting the LED
• Current flow times for thermal stabilization of the LED
• Range for spectral evaluations
Sorting Criteria
• Setting upper and lower limits for sorting each measured value.
• Formula editor for calculations that can also be used for sorting
• Sorting by colour ranges in the CIE chromaticity space
• Any AND/OR links for all sorting criteria
• Optional assignment of sorting bins
• Allocation of colours and names to each bin
• Grouping several bins in a bin group
• Selection of statistical samples
WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475 23
CHAMELEON PHOSPHOR COLORIMETRIC MEASUREMENT SYSTEM SPECIFICATIONSCHAMELEON PHOSPHOR COLORIMETRIC MEASUREMENT SYSTEM SPECIFICATIONSCHAMELEON PHOSPHOR COLORIMETRIC MEASUREMENT SYSTEM SPECIFICATIONS
MODEL CHAME - FLUO CHAME - QY UNIT
Spectral Range 380 to 780 with Radiant flux calibrationo 780 with Radiant flux calibration nm
Spectral Resolution 2.52.5 nm
QY Measurement Repeatability ± 1 ± 2.5 %
Colour And Intensity Measuring Items Intensity value ( lm, w ) x, y, ity value ( lm, w ) x, y, λd, λp, λc, FWHM, CCT, CRI -
Repeatability IV: ±2% λD: ±0.3 nm x, y: 0.002IV: ±2% λD: ±0.3 nm x, y: 0.002 -
Accuracy IV: ±7% λD: ±1 nm x, y: 0.005IV: ±7% λD: ±1 nm x, y: 0.005 -
Interface USB 2.0USB 2.0 -
Dimension 414 × 243 × 415 420 × 330 × 185 mm
*1 Directly after calibration relative to the calibration standard
PHOSPHOR COLORIMETRIC &
QUANTUM YIELD ANALYZER
Chame - Fluo Phosphor Colorimetric
• Unique Integrating Sphere Design
• Quantitative Fluorescence Intensity \Measurement
• Phosphor Color Analysis
• Phosphor IQC for LED manufacturer
• Photo Luminance Measurement for White LED
• Compact and Easy Installation
Chame - QY Quantum Yield Analyzer
• Excitation and Absorption Analysis
• Quantum Yield Measurement for LED Phosphor
• Optionally equipped with tunable light source for excitation
24 WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475
Spectroradiometer
Chameleon
Blue Absorption and Quantum Yield
Phosphor Powder
Phosphor Epoxy on SMD
LED Phosphor Form
CHAMELEON PHOSPHOR COLORIMETRIC MEASUREMENT SYSTEM SPECIFICATIONSCHAMELEON PHOSPHOR COLORIMETRIC MEASUREMENT SYSTEM SPECIFICATIONSCHAMELEON PHOSPHOR COLORIMETRIC MEASUREMENT SYSTEM SPECIFICATIONS
MODEL CHAME - FLUO CHAME - QY UNIT
Power 100 - 240 VAC USB 2.0 bus powered or ext. DC 5V -
Diameter is 50 with 10 aperture Diameter is 120 mm
Integrating Sphere And Optical Design
8° Excitation with beam spot
adjustment
Two pieces design with removable cover -
Integrating Sphere And Optical DesignPerpendicularly fluorescence light
collect
Movable sample holder for quantum yield
measurement
-
Temperature controlled 460 nm
blue LED excitation
90° Excitation focus optics -
WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475 25
LED Phosphor Purpose
Powder Determine colour from fluorescence spectrum & quantum yield
Powder Mixed With Epoxy Determine phosphor concentration in epoxy for process control
Chameleon Software
The Chameleon software package is a complete solution for LED colour
analysis and offers measurements according to the CIE standards.
Using the CIE software is very easy; its functions are clearly structured in
four main steps:
• Full control of the measurement parameters
• Guidance through the measurement procedure
• Ready-to-use numerical results as well as a graphical chromaticity
diagram
• Storage of past measurements
It is an ideal tool for process control or QA colour measurements in
industrial applications. Common applications for this software including
LED and glass bulb lighting. It can also be used in photometric
applications for light emitters.
Notes.
26 WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475
Spectroradiometer
Chameleon
Chameleon System Ordering Information
400 - 780 nm
Model Description
Chame - IH 100 Luminous intensity 100 mm, CIE 127A compatible, Maximum intensity up to 8000 mcd with one
calibration range ( 50 % ND filter )
Chame - LH 200 Luminous flux calibrated, 200 mm integrating sphere, maximum intensity up to 160 lm, with one
calibration range ( 25% ND filter )
Chame - QY 400 - 780 nm quantum yield measurement system, software: quantum yield, included 460 nm blue
LED with power supply
CHame - Fluo LED phosphor measurement system, LED phosphor measurement system. Included Fluo-LED460
excitation source, 3 position rotation stage and 3 powder sample holder
IH 100 Luminous intensity 100 mm, CIE 127A compatible adaptor, can switch with luminous flux integration
sphere
SGM1NDF - 0D00 Extra calibration for Chame - LH200, measurement range up to 40lm
SGM1NDF - 0D03 Extra calibration for Chame - LH200, measurement range up to 80lm
SGM1NDF - 0D06 Extra calibration for Chame - LH200, measurement range up to 160lm
SGM1NDF - 0D10 Extra calibration for Chame - LH200, measurement range up to 400lm
SGM1NDF - 0D20 Extra calibration for Chame - LH200, measurement range up to 3500lm
LED Source / MeterLED Source / Meter
Chame - 3000 -SL1 1-Ch, LED source / meter, output current 0.5 A/Ch
Chame - 3000 -SL2 2-Ch, LED source / meter, output current 0.5 A/Ch
Chame - 3000 -SL3 3-Ch, LED source / meter, output current 0.5 A/Ch
Chame - 3000 -SH1 1-Ch, LED source / meter, output current 1.5 A/Ch
Chame - 3000 -SH2 2-Ch, LED source / meter, output current 1.5 A/Ch
Chame - 3000 -SH3 3-Ch, LED source / meter, output current 1.5 A/Ch
WWW.GILDENPHOTONICS.COM | [email protected] | T: +44(0) 141 952 9475 27
Chameleon Mounting Frame & LED Socket AdaptorChameleon Mounting Frame & LED Socket Adaptor
MIA - TS - 001 MegaLED - SGM100 base plate
MIA - IHISADP IS intensity head adaptor for MIA
MIA - LHISADP IS integration sphere adaptor
MIA - 3014 Test socket dimension 3.0 × 1.4 mm
MIA - 3020 Test socket dimension 3.0 × 2.0 mm, compatible with IS LED-555
MIA - 3528 Test socket dimension 3.0 × 2.8 mm, compatible with IS LED-545
MIA - 5050 Test socket dimension 5.0 × 5.0 mm
MIA - AX08 Test Ssocket for AX08
Excitation Source For Chame - Fluo and Chame - QYExcitation Source For Chame - Fluo and Chame - QY
QY - LED460 460 nm ( dominant wavelength ) 1W LED excitation light source, with adaptor to fit Chameleon QY
excitation port
Fluo - LED460 Temperature and power stabilized 460 nm ( dominant wavelength ) 1W LED excitation light source
module for Chame-Fluo replacement purpose
Fluo - LEDxxx Plug and play temperature and power stabilized and customer selected dominant wavelength 1W LED
excitation light source module for Chame-Fluo
Sample Holder
QY - F1 Powder sample holder
Chameleon System Ordering Information
400 - 780 nm